RM-20: 140802
ROTA MOULDING WA PTY LTORotational Moulding SpecialistsA.e.N. 100922736 A.B.N. 53 100922736
'4 Artello Bay Road MIDV,ALE WA 6056Ph: (08) 9250 1125 Fax: (08) 9274 3688
Web: www.rotamoulding.com.au
TANK MOUNTING INSTRUCTIONSSP2000 SP2700 SP300Q SP5000 A
180 HOLE CENTRES ryp 5P3'OOC) ~
HOLE CENTR
SP2000 = 12SP2700 = 11SP3000 = 12SP3800 = 12SP5000 = 1~
I I
~ MAIN CHASSIS RAIL ~~ ~ iuJ ~ ~ /
~~
\ II=!•.....
V) 75x50x5 RHS V)ES I :::c
et:~
et:10 L.h Tie brace to be IfI
25 ~ fitted as close as ~ xIfI
10 ~ possible to sump. ~e--,X
10 Cl C>IfI IfI
'85 ~ .•....7SxSOxS RHS
IW.' ~
~17 I!:!:!
ll-II _'--r. " 101 r. ioJ
~ MAIN CHASSIS RAIL ~I I
BEAM CENTRES- •........•SP2000 = 1395SP2700 = 1860SP3000 = 2180SP3800 = 2180SP5000 = 2180
780mm for SP5000 ONLY-6S0mm for SP 2000. 2700. 3000 & 3800
, .» I- -I ~~~ flUSWWlTH T~ •
~llirJ ,.
-:-: --,--r
TIE BRACE
SECTION AA
~:3 ~~I~SQRI~SQR
ANGLE for SP2000. ANGLE FOR SP5000 ONLY2700. 3000 & 3800
Tank Mounting Instructions for5001t, 8001t, 10001t, 1200lt and 1600/t
JJO
RM19:080201
180mmCentres--
10
__ 1S0mm _
Please note: The plastic feet that come with the tank are only for pre-mounting transport and are not suitable to support the tank when in use.The supplied pins are for bolting the tank down - Do not dispose of these.
- Note:All Rota Moulding tanks mustbe securely mounted before
use.o I
"f::'\ 11mm~holedia
-to----B~---------
1
-10-- ------- -01-- - .1 __--I0 0 I SOOI_ 820mm centres
8001 - 72Smm centres
10001 - 72Smm centres
1200l-117Smm centres
1S001- 117Smm centres
16001 - 1S00mm centres
••
The Rota Moulding tankshave a full draining sump.
This requires the 2 ends tobe full supported allowing the
sump to protrude past themounting points.
SOOl- 71Smm hole centres
8001- 1030mm hole centres
10001 - 1030mm hole centres
12001 - 1030mm hole centres
1S001 - 1030mm hole centres
16001 - 1030mm hole centres The sump also must besupported by either the trayof the vehicle or a bearer.
Rota Moulding have sets ofgalvanized feet available for
purchase.
In some situations the tanksmay be part of frame
containing other equipment
PLEASE BE AWARE
Please Note: tank dimensions may vary + or - 1%
Tank - end view
Make sure hot exhaustspoint away from the tank
If bottom filling the tank, thelid must be completely
removed.
1Tanks natural in colour are
food grade but are notsuitable for drinking water
/ 75mm for" 500lt to 1200lt
/100mm for 16001
For more informationPlease contactRota Moulding
14 Artello Bay RdMidvale WA 6056
PH: 9250 1125www.rotamoulding.com.au
Stand,'- Sump,,,/
Bolt throughpin (supplied) with tank
using aM10 x 70mm bolt andnyloc nut (not supplied)
Top Related