Pre
ssur
e
Labor time
0
Impact Blow GunAir Saving
Application Examples <Can quickly remove foreign matter, etc. that is hard to remove with existing blow devices>
For the quick removal of machining chips coated with oil For the removal of foreign matter with a single shot from a distance
For the quick removal of water dropletsFor the separation of workpieces stuck together with oil, etc.
IBG1
Existing blow gun Impact blow gun
Air consumption: 0.8 LAir consumption: 6.3 L
Increased impact force due to higher peak pressure Drastic reduction in air consumption and labor time
Existing model
IBG1: Air consumption
Existing model: Air consumption
3 timesor more*1
(Compared with theexisting model)
87%reduction*2
High peak pressure
Air consumption
* 1 According to blow requirements* 2 Pressure: 0.5 MPa
(Based on SMC’s specific testing conditions)
Labortime:
97%reduction
Airconsumption:
87%reduction
Video
INFORMATION
IBG1 Series19-E711
RoHS
B
Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPANPhone: 03-5207-8249 Fax: 03-5298-5362https://www.smcworld.com© 2019 SMC Corporation All Rights Reserved
Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.
D-G
Safety Instructions Be sure to read the “Handling Precautions for SMC Products” (M-E03-3) and “Operation Manual” before use.
Supply port
Rc3/8
Specifications
Options
With adjustment function With a long nozzle
Nozzle length: 50/100/150/300 mm
Fluid Air
Operatingpressure range 0.1 to 0.7 MPa
Weight : 380 gOperational force:
10 N or less
Pre
ssur
e
Labor time
0
164
mm
40 mm
83 mm
Port size: Rc1/4
The peak pressure can be adjusted according to the workpiece.
Indicator window
0 to 4
Tank
Integral tank
As the tank is built in to the air gun, the product is not affected by pressure drops on the inlet side.
With adjustment function (Option)
Adjusts the peak pressure
As the pressure of the air blow is quite powerful, the following precautions should be taken before use.1. Before use, make sure that the blow pressure, or blow, will not cause
surrounding objects to scatter and injure others or damage workpieces, equipment, etc., in the vicinity.
2. Wear protective eyewear when operating the product to protect your eyes from scattering debris.
3. During operation, do not aim the product at another person as injury may result.
4. This product is not a toy. Do not play with the product or use it as an air gun for fun.
5. Air pressure may cause the nozzle to fly off during operation if it is not properly tightened. To prevent this, be sure to check the nozzle for loosening by pulling on it with your hands before use.
6. The grip may become hot due to repeated operation; however, this is not abnormal.
IBG1 Series/Specific Product Precautions
Grip
IBG1 Series
Top Related