CAR
Rick and MortyPortal - ExtruderVisualizer
VIEW IN BROWSER
updated 29. 8. 2019 | published 29. 8. 2019
PRUSAPRINTERS
Summary
I decided my Prusa MK3s needed a really cool extruder visualizer - anddecided to design an animated Rick and Morty Portal. Animated Gif of the visualizer in action.
Please see the Prusa Blog for details on building the inner, spinning, "swirl"
1 hrs
2 pcs
f
0.15 mm
k
0.40 mm
h
PLA
9 g
d
MK3/S
3D Printers > Other Accessories
visualizer rickandmorty rick portal morty extruder
"Swirl" was printed in Inland PLA - Peak Green.
"Fixed Portal" was started with Inland PLA - Light Blue, and then changedto Inland PLA - Dark Green once the layer change was signaled. This allowsfor a really nice color version of the swirling portal.
The "Fixed Portal", when complete, will attach to the extruder housingdirectly. Then, using the previously mentioned Blog steps, the "Swirl" printwas attached to a mini-magnet and connected to the extruder motor shaft.
Print Files (.gcode) DOWNLOAD ALL FILES
1.5 MB
0.41 hrs f 0.15 mm k 0.40 mm h PLA 1.70 g d MK3/S
updated 29. 8. 2019
2.0 MB
0.98 hrs f 0.15 mm k 0.40 mm h PLA 7.10 g d MK3/S
updated 29. 8. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
1.8 MBupdated 29. 8. 2019
2.9 MBupdated 29. 8. 2019
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use
swirl-portal_015mm_pla_mk3s_25m.gcode
fixed-portal_015mm_pla_mk3s_59m.gcode
swirl-portal.stl
fixed-portal.stl
✖ | Free Cultural Works ✖ | Meets Open Definition
Top Related