2014 Ford Explorer Submodel: | Engine Type: | Liters: Fuel Delivery: | Fuel:

417-01 Exterior Lighting 2014 ExplorerREMOVAL AND INSTALLATION Procedure revision date: 06/03/2013

Rear Lamp AssemblyExploded View

Item Service Part Number Description Tool Number Material Name Notes1 W715731 Rear lamp assembly bolt covers (2 required) - - -2 W712801 Rear lamp assembly bolt (2 required) - - -3 13404 / 13405 Rear lamp assembly (Right Hand (RH) / Left Hand (LH)) - - -4 W713579 Rear lamp assembly clip - - -5 13A457 Rear lamp assembly upper grommet - - -6 13466 Rear lamp assembly upper bulb - - -7 13466 Rear lamp assembly lower bulb - - -8 13A457 Rear lamp assembly lower grommet - - -9 W711031 Rear lamp assembly nuts (2 required) - - -10 13410 Rear lamp socket assembly - - -

Removal

WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in Section 100-00. Failure to follow this instruction may result inserious personal injury.

1. Remove the 2 rear lamp assembly bolt covers.

2. Remove the 2 rear lamp assembly bolts.

3. Remove the rear lamp assembly and disconnect the electrical connectors.Installation

1. Connect the electrical connectors and install the rear lamp assembly.

2. Install the 2 rear lamp assembly bolts.

1. Tighten to 3 Nm (27 lb-in).

3. Install the 2 rear lamp assembly bolt covers.

Copyright 2013 Ford Motor Company