Specifications RAVE42-IFT-B
Please consult the manufacturer’s installation manual for all details and requirements before making a final
design layout decision.
Rave 42Direct Vent Gas Fireplace
16-3/4"[425]
32-3/8"[822]
2-3/16"[56]
6"[152]
17-1/4"[438]
25-7/8"[657]
50-1/2"[1283]
7-3/4"[197]
48" [1219]43" [1092]
39-1/16" [993]
15-1/4"[387]
33-11/16"[856]
3-1/2"[89]
7"[178]
46-1/2"[1181]
9-13/16"[249]
17-3/4"[451]
1/2" [13]37-3/4"[959]
GAS LINE ACCESS
ELECTRICALACCESS
6-5/8" [168]
HEAT MANAGEMENT SYSTEMS ACCESS
10-3/8"[264]
7-1/2"[191]
MODEL FRONT WIDTH BACK WIDTH HEIGHT DEPTH GLASS SIZE
RAVE42-IFT-B
Actual Framing Actual Framing Actual Framing Actual Framing39-1/16" x 15-1/4"
(992 x 387)48"(1219)
49"(1245)
37-3/4"(959)
49"(1245)
33-11/16"(856)
32-3/4"(832)
17-3/4"(451)
17-3/4"(451)
Top View
Front ViewLeft Side View Right Side View
16-3/4"[425]
32-3/8"[822]
2-3/16"[56]
6"[152]
17-1/4"[438]
25-7/8"[657]
50-1/2"[1283]
7-3/4"[197]
48" [1219]43" [1092]
39-1/16" [993]
15-1/4"[387]
33-11/16"[856]
3-1/2"[89]
7"[178]
46-1/2"[1181]
9-13/16"[249]
17-3/4"[451]
1/2" [13]37-3/4"[959]
GAS LINE ACCESS
ELECTRICALACCESS
6-5/8" [168]
HEAT MANAGEMENT SYSTEMS ACCESS
10-3/8"[264]
7-1/2"[191]
16-3/4"[425]
32-3/8"[822]
2-3/16"[56]
6"[152]
17-1/4"[438]
25-7/8"[657]
50-1/2"[1283]
7-3/4"[197]
48" [1219]43" [1092]
39-1/16" [993]
15-1/4"[387]
33-11/16"[856]
3-1/2"[89]
7"[178]
46-1/2"[1181]
9-13/16"[249]
17-3/4"[451]
1/2" [13]37-3/4"[959]
GAS LINE ACCESS
ELECTRICALACCESS
6-5/8" [168]
HEAT MANAGEMENT SYSTEMS ACCESS
10-3/8"[264]
7-1/2"[191]
16-3/4"[425]
32-3/8"[822]
2-3/16"[56]
6"[152]
17-1/4"[438]
25-7/8"[657]
50-1/2"[1283]
7-3/4"[197]
48" [1219]43" [1092]
39-1/16" [993]
15-1/4"[387]
33-11/16"[856]
3-1/2"[89]
7"[178]
46-1/2"[1181]
9-13/16"[249]
17-3/4"[451]
1/2" [13]37-3/4"[959]
GAS LINE ACCESS
ELECTRICALACCESS
6-5/8" [168]
HEAT MANAGEMENT SYSTEMS ACCESS
10-3/8"[264]
7-1/2"[191]
40-3/16"
14-1/8"
45-1/8"
6-7/8"9-13/16"
19-7/8"26-7/8"
(1021)
(359)
(1146)
(175)(249)
(505)(683)
CLEAN FACE TRIM
26-13/16" (680)
10-7/16" (265) 6-7/8"
(175)
45-1/8" (1146)
20” (508)
38-15/16" 989)
12-13/16" (325)
ILLUSION FRONT
Specifications
HTL_RAVE42-IFT-B_0220Lakeville, MN Phone: (800) 927-6841 Web: www.heatilator.com
RAVE42-IFT-B
Product information provided is not complete and is subject to change without notice. Product installation must adhere strictly to instructions accompanying product to avoid risk of fire and potential injury.
Additional information can be found online at www.heatilator.com
APPLIANCE LOCATION
WALL PENETRATION
MANTEL LEG/WALL PROJECTIONS
FRAMING DIMENSIONS
1/2"
TOP VENTONE 900 ELBOW
TOP VENTONE 90° ELBOW*
See Install Manual for Alcove
Installation50-1/2"
49"
71-1/2"
19-1/2"
17-1/4"
[1283]
[1245]
[1816]
[495]
[438]
50-1/2" [1283]
1/2"
60-1/2"85-1/2"
24-1/2"
[1536][2171]
[622]60-1/2" [1536]
Corner installation with use of SmartWall kit
*For SMARTWALL and HEAT-ZONE-GAS kits, add 12” to each side for 90° duct bend.
47-1/2"
46-1/2"
[1207]
[1181]
10"10"
DO NOT PACK WITH INSULATION OR OTHER MATERIAL
• 8/17 DRAFT COPY
8-5/8"
32-3/4"
17-3/4"
49"
[219]
[832]
[451]
[1245]
NOTE: Header MUST be installed on end as shown in the diagram.
HEADER: Two 2 X 4s or Two 2 X 6s installed on end
WALL3' MAX.
6" MIN.
APPLIANCE OPENING WALLUNLIMITED
7" MIN.
APPLIANCE OPENING
PRODUCT LISTING CODES
US ANSI Z21.88-2017
CAN CSA 2.33-2017
UL307B
Shows center of vent framing hole for top or rear venting. The center of the hole is 1" (25mm) above the center of the horizontal vent pipe.
AREA TO COMBUSTIBLES
CLEARANCE TO CEILING
31" [787]
NON-COMBUSTIBLE FLOOR
0" [0]
COMBUSTIBLE FLOORING
0" [0]
BEHIND APPLIANCE
1/2" [13]
SIDES OF APPLIANCE
1/2" [13]
FRONT OF APPLIANCE
36" [914]
31"
0"
0" 1/2"
1/2"
36"
[787]
[13]
[13]
[914]
MEASURE FROM TOP OF APPLIANCE OPENING IN CEILING
MINIMUM FIREPLACE CLEARANCES /CLEARANCES TO COMBUSTIBLES
Combustible Mantels
9 1113
14
TO CEILING
69
12
3
6 810
11
TO CEILING
69
12
3
Combustible Mantels -Passive Heat Kit Installed
Non-combustible Mantels
12" MAX.1/2" THICK WALL SHEATHING
14" MIN. BOTTOM OF MANTEL TO TOP OF APPLIANCE OPENING
NON-COMBUSTIBLE MANTEL
6" MAX.
MANTEL PROJECTIONS (or other materials above appliance)
NON-COMBUSTIBLE MANTEL PROJECTIONS (or other materials above appliance)
Top Related