QKT AUDIO SET UP

1. Select rtr-vl-main on the KVM

to get to the VistaLink

2. Open VistaLink Pro (if it is not yet open)

username: administrator

there is no password

3. Select the frame sync for your event

FRM07 then HDFS07

or FRM08 then HDFS08

or FRM15 then HDFS15

4. With the HDFS of your frame sync still selected

click on Configuration and then

View Configuration

5. Click on the Audio Control tab

Then set Input Ch1 and Ch2 to AES

6. On the Audio Process UC tab

Set Output Channel 2 to Channel 1

This sets the frame sync to a Mono Mix

QKT AUDIO SET UPCONTINUED . . . .

7. In the Audio Gain UC, Set Input Channel 1

to between + 10.0 and 24.0 dB

8. Click Apply

You have now set up your QKT Audio

AFTER YOUR EVENT

Be Sure to reset the Mono-Mix so the next show on this

Frame Sync can be in Stereo