10
1
2
4-2 Toronto, Edmonton, Saskatoon, Vancouver, Montreal
9
6
7
5
3
4
8
PVC TYPE I SHEET
Simona® PVC Type I Sheet
Notes:• Meets ASTM D-1784-81 Type I Grade I Class 12454. • Meets Federal Specification L-P 535e. • Meets UL 94V-0,94-5V Flammability rating. • Meets ASTM E 84 Flame Spread Rate 15, Fuel Contribution 0. • Maximum application temperature +140°F. • Custom lengths, sizes, colors and special requirements available upon request.• Gray PVC Sheet has no protective foil.• White PVC Sheet has one side protective foil.• Blue PVC Sheet is available as a special order with one side embossed or with two sides smooth.• * refers to items that are non-stock. Minimum orders and long leadtimes may be encountered.• Custom lengths, sizes, colors and special requirements available upon request.• Also Available in White, Light Grey, and black without protective foil.
SIMONA® VERSADUR® and CAW PVC Type I sheet is extruded to exacting specification for normal impact applications. This type of sheet has excellent corrosion resistance, very good dielectric properties, low moisture absorption, high rigidity, good abrasion resistance and excellent weathering properties. The material is also self-extinguishing. It is available in dark gray, white and blue. It is available in 4’ x 8’ sheets and two metric sizes in thickness up to 2”.
Features:• Normal Impact • Excellent chemical and corrosion resistance • Easily to fabricate, weld or machine • Showcase quality surface • Single- or double-side protective foil • Stress relieved, square, flat sheets • Accurate to dimensional tolerances • Color consistent
PART NUMBER
THICK-NESS (IN)
WT PER
SHEET (LBS.)
PART NUMBER
THICK-NESS (IN)
WT PER
SHEET (LBS.)
GREY WHITES110011* 1/16 15.36 * 1/16 15.36
S110111* 3/32 23.04 * 3/32 23.04
S110211 1/8 30.72 * 1/8 30.72
S110311 3/16 46.08 * 3/16 46.08
S110411 1/4 61.44 * 1/4 61.44
S110511 3/8 92.16 * 3/8 92.16
S110611 1/2 122.88 * 1/2 122.88
S110711 3/4 184.32 * 3/4 184.32
S110811 1 245.76 * 1 245.76
PART NUMBER
THICK-NESS (MM)
WT PER
SHEET (LBS.)
PART NUMBER
THICK-NESS (MM)
WT PER
SHEET (LBS.)
CAW - 2000MM X 1000MM
CAW - 3000MM X 1500MM
S110012* 1 6.17 S110112* 1.5 9.48 S112012* 2 12.57 S112013* 2 28.22 S110212* 3 18.74 S110213* 3 42.33 S112212* 4 25.13 S112213* 4 56.44 S112512* 5 31.31 S112513* 5 70.55 S110412* 6 37.48 S110413* 6 84.43 S114812* 7 43.87 S114813* 7 98.55 S114612* 8 50.04 S114613* 8 112.66 S114912* 9 - S114913* 9 126.74 S113012* 10 62.61 S113013* 10 140.87 S110612* 12 75.18 S110613* 12 169.09 S113112* 15 93.92 S113113* 15 211.42 S113212* 20 125.22 S113213* 20 281.75 S110812* 25 156.53 S110813* 25 352.30 S110912* 30 187.83 S110913* 30 422.62 S113412* 35 219.14 S111012* 40 250.44 S111212 50 313.06
Applications:• Chemical processing • Semiconductor processing equipment • Pollution control equipment • Machined and fabricated parts • Etching and plating tanks • Scrubbers, hoods, ducts and other protective
equipment
10
2
1
www.fabcoplastics.com 4-3
9
6
7
5
3
4
8
SIMONA® PVC TYPE I SHEET TECHNICAL DATASIMONA® VERSADUR® PVC TYPE I ASTM TEST METHOD UNIT TYPICAL VALUE
PHYSICALDensity D-792 g/cc 1.45
Water Absorption (24 hrs @ 73 °F) D-570 % 0.04
MECHANICALTensile Strength D-638 PSI 7,820Tensile Modulus D-638 PSI 496,000
Elongation D-638 % 150Izod Impact D-256 ft. lbs./in. 0.8
Rockwell Hardness D-785 “R” scale 113
THERMALHeat Distortion Temperature at 66 psi D-648 °F 172Heat Distortion Temperature at 264 psi D-648 °F 162
Vicat Softening Temperature D-1525 °F 169Coefficient of Thermal Expansion D-696 in./in. °C 80 x 10-6
Temperature Range °F +32 to +140
ELECTRICALVolume Resistivity D-257 ohm·cm >10 x 1015
FLAMMABILITYFlammability D-635 self-extinguishing
UL 94V-0, 94-5V
SIMONA® PVC TYPE I SHEET TECHNICAL DATASIMONA® CAW PVC TYPE I ASTM TEST METHOD UNIT TYPICAL VALUE
PHYSICALDensity D-792 g/cc 1.44
Water Absorption (24 hrs @ 73 °F) D-570 % NA
MECHANICALTensile Strength D-638 PSI 8,400
Tensile Modulus D-638 PSI 479,000
Elongation D-638 % 150
Izod Impact D-256 ft. lbs./in. 0.8
Rockwell Hardness D-785 “R” scale 108
THERMALHeat Distortion Temperature at 66 psi D-648 °F 168
Heat Distortion Temperature at 264 psi D-648 °F 154
Vicat Softening Temperature D-1525 °F 172
Coefficient of Thermal Expansion D-696 in./in. °C 80 x 10-6
Temperature Range °F +32 to +140
ELECTRICALVolume Resistivity D-257 ohm·cm >10 x 1015
FLAMMABILITYFlammability self-extinguishing
94V-0 low flammability
DIN 4102 B1 low flammability
PVC TYPE I SHEET
10
1
2
4-4 Toronto, Edmonton, Saskatoon, Vancouver, Montreal
9
6
7
5
3
4
8
SIMONA® VERSADUR® and MZ PVC Type II sheet is extruded to exacting specification for high impact applications. This type of sheet has excellent corrosion resistance, very good dielectric properties, low moisture absorption, high rigidity, good abrasion resistance and excellent weathering properties. The material is also self-extinguishing. It is also available in 4’ x 8’ sheets in light grey and white.
PVC TYPE II SHEET
Simona® Versadur® PVC Type II Sheet
Applications:• Pollution control equipment • Machined and fabricated parts • Etching and plating tanks • Scrubbers, hoods, ducts and other protective
equipment
THICKNESS (MM) WT PER SHEET (LBS.)
VERSADUR 250 - 4’ X 8’ 1/16” 15 1/8” 30 3/16” 45 1/4” 60 3/8” 90 1/2” 120
Notes:• Meets ASTM D-1784-81 Type II Grade I Class 15333-D. • Meets ASTM E 84 Flame Spread Rate 15, Fuel
Contribution 0. • Meets UL 94V Standards. • Meets Federal Specification L-P 535e. • Maximum application temperature 140°F. • Custom lengths, sizes, colors and special requirements
available upon request.• Light Grey and white PVC Sheet have no protective foil.• Light Grey MZ sheet is offered without protective foil.
SIMONA® PVC TYPE II SHEET TECHNICAL DATA
ASTM TEST METHOD UNIT SIMONA® VERSADUR® PVC TYPE II
SIMONA® MZ PVC TYPE II
PHYSICALDensity D-792 g/cc 1.33 1.42
Water Absorption (24 hrs @ 73 °F) D-570 % 0.05 NA
MECHANICALTensile Strength D-638 PSI 6,070 7,500Tensile Modulus D-638 PSI 345,000 435,000
Elongation D-638 % 145 20Izod Impact D-256 ft. lbs/in 14 1.2
Rockwell Hardness D-785 “R” scale 107 107
THERMALHeat Distortion Temperature at 66 psi D-648 °F 165 162Heat Distortion Temperature at 264
psi D-648 °F 158 160
Vicat Softening Temperature D-1525 °F 162 167Coefficient of Thermal Expansion D-696 in./in. °C 80 x 10-6 80 x 10-6
Temperature Range °F +32 to +140 +32 to +140
ELECTRICALVolume Resistivity D-257 Ohm-cm >1015 >1015
FLAMMABILITYFlammability self-extinguishing self-extinguishing
94V-0 low flammability DIN 4102 low flammability
Features:• High Impact (PVC-MZ: Increased Impact Resistance) • Minimal shrinkage • Good corrosion and chemical resistance • Easy to fabricate, weld or machine, hot and cold formable • Showcase quality surface • Stress relieved, square, flat sheets • Accurate to dimensional tolerances • Color consistent
Top Related