VICTAULIC® LOCATIONS
UNITED STATES ANDWORLD HEADQUARTERS4901 Kesslersville RoadEaston, PA 18040 USA1 800 PICK VIC1 800 742 5842(within North America)1 610 559 [email protected]
victaulic.com
MEXICO BRAZILCalle Circuito del MarquesNo 8 al 11Parque Industrial El MarquesMunicipio El MarquesQueretaro, MexicoCP 8624652 442 253 [email protected]
Av. Marquês de São Vincente446 Cj 1303Várzea da Barra Funda –São Paulo-SPCEP 01139-000 – Brazil55 11 3548 [email protected]
AWWA PRICE LIST
PRODUCTS FOR GROOVED END PIPE
AWWA PRICE LIST
PRODUCTS FOR GROOVED END PIPE
PL2017-AWWA Effective April 1, 2017
PL2017-AWWA 10681 REV A UPDATED 04/2017Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. © 2017 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
victaulic.com
Table of contents
Gasket Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Victaulic Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2AWWA COUPLINGSCoupling Coating Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Style 31 Standard Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Style 307 Transition Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . 4Style 341 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 4Flange Parts – Style 341 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Style 31 and 307 Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Plated Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6VIC-RING JOINT ASSEMBLYVic-Ring Shouldered Joint Check Sheet . . . . . . . . . . . . . . . . . . . 7Style 41 Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Style 44 Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8AWWA VALVESPlug Valve Disc Coating/Seal Options . . . . . . . . . . . . . . . . . . . . 9Series 365 with Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9List Adders for Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Gear Operator Accessories for Series 365 Plug Valves . . . . . . . 10Series 317 AWWA Check Valve . . . . . . . . . . . . . . . . . . . . . . . . 11Series 317 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11List Adders for Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 12Series 318 Sump Ejector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 12AWWA FITTINGSFitting Coating Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Tapped Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14No. 10-C 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14No. 11-C 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14No. 12-C 22Z\x° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15No. 13-C 11Z\v° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15No. 100-C 90° Long Radius Elbow . . . . . . . . . . . . . . . . . . . . . 16No. 10-CR Reducing Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 17No. 20-C Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18No. 30-C 45° Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18No. 60-C Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18No. 35-C Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
No. 25-C Reducing Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19No. 30-CR Reducing Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . 20No. 100-CR 90° Long Radius Elbow . . . . . . . . . . . . . . . . . . . . 20No. 30-CR Reducing Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . 21No. 100-CR 90° Long Radius Elbow . . . . . . . . . . . . . . . . . . . . 21No. 35-CR Reducing Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . 22No. 50-C Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . 23No. 51-C Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . 24No. 21-C Bullhead Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25No. 33-C True Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Base Fittings
No. 10-CB 90° Base Elbow . . . . . . . . . . . . . . . . . . . . . . . . 26No. 20-CB Base Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26No. 100-CB 90° Base Long Radius Elbow . . . . . . . . . . . . . 26No. 25-CB Reducing Base Tee . . . . . . . . . . . . . . . . . . . . . 27
No. 10-CF 90° Flare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28No. 100-CF 90° Long Radius Flare . . . . . . . . . . . . . . . . . . . . . 28No. 10-CS 90° Side Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 28No. 20-CS Tee Side Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 28No. 43-CF Straight Flare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Style 926 Mechanical-T Spigot
for use with AWWA C151 Size Pipe . . . . . . . . . . . . . . . . . 29PIPE PREPARATION TOOLSCut Grooving Tools
VG28GD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32VG824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33VG412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34VG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Pipe Preparation Tool AccessoriesPower Mule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35PT100A Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . . . . . . . 36
Terms and Conditions of Tool Rental . . . . . . . . . . . . . . . . . . . . 37Terms and Conditions of Tool Sale, Tool Warranty . . . . . . . . . . 38Terms and Conditions of Sale . . . . . . . . . . . . . Inside Back CoverWarranty, Victaulic Contact Information . . . . . . Inside Back Cover
1
Table of Contents
VICTAULIC.COM PL2017-AWWA
Gasket Selection
Gasket Selection GuideIMPORTANT – Please read before ordering. Gasket selection must always be specified on order.
Flush-Seal™ Standard Gasket
STYLE 31
GRADETEMP.
RANGE * COMPOUNDCOLOR CODE GENERAL SERVICE GUIDELINES
S † –20°F to +180°F Nitrile Orange
Stripe
Specially compounded to conform to ductile pipe sur-faces. May be specified for petroleum products, air with oil vapors, vegetable and mineral oils within the speci-fied temperature range. Not compatible for use with hot, dry air over +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES.
M † –20°F to +200°F Halogenated
ButylBrownStripe
May be specified for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Readily conforms to ductile pipe surfaces. UL Classified in accordance with ANSI/NSF 61 for cold +86°F | +30°C potable water sys-tems and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
L –30°F to +350°F Silicone RedGasket
May be specified for dry heat, air without hydrocarbons to +350°F | +177°C and certain chemical services.
† Provided as standard gasket for Styles 31 and 307 couplings plus Style 341 Vic-Flange Adapter. Specify choice on order.
* For specific chemical and temperature compatibility, refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.
Victaulic Lubricant
Victaulic Lubricant LUBRICANT Price EachPACK With 12 Tubes – 4 Fluid Ounces/120 ml Each $398.50
CONTAINER One Quart – 32 Fluid Ounces/960 ml Each 174.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
To ensure easy assembly and service of all your Victaulic installations including HDPE, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.
LUBRICANT USAGE GUIDESize of Gasket inches
Number of Gaskets Size of Gasket inches
Number of Gaskets Size of Gasket inches
Number of Gaskets
Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart2 55 400 8 13 100 16 6 453 36 270 10 11 80 18 5 354 26 200 12 8 60 20 4 306 17 125 14 7 50 24 3 20
VICTAULIC.COM PL2017-AWWA2
Gaskets
AWWA COUPLINGS, Coupling Coating Options
Standard AWWA Couplings
Coating Options Victaulic couplings and flange adapters are available in a variety of coatings. This is a list of the most common coatings. Victaulic couplings are supplied with a Tnemec Series 37-77 unless specified otherwise. For more information regarding available coatings, contact Victaulic.
Coating % IncreaseAsphalt 0
Tnemec Series 37-77 0Tnemec Series 20 +Tnemec Series 66 8Tnemec Series 69 8
Tnemec Series 90 - 97 8Tnemec Series 104 8
Coating % IncreaseTnemec Series 135 8Tnemec Series 140 8Tnemec Series 160 +Tnemec Series 161 +
Coal Tar Epoxy (T46H413) 17Tnemec Series 1 8
Wasser MC-FerroClad 8
+ Contact Victaulic for product details.
Style 31 Standard Coupling
Standard Coupling
STYLE 31
With Flush-Seal™ GasketRefer to publication 23.02.
STYLE 31 – GRADE “S” OR “M” FLUSH-SEAL™ GASKET
PIPE Inches
Approx. Wgt. Each
Coupling Complete w/Grade “S” or “M” Flush-Seal Gasket and Plated Bolt &
Nut †
Coupling Complete w/Grade “S” or “M” Flush-Seal Gasket and Stainless Steel
Bolt & Nut † Spare Parts
Nom. Size
Outside Dia. lb
Price Each Price Each Plated Bolt & Nut
Painted Galv. Painted Galv.No. * Bolts
Size Inches
3 3.96 4.3 $184.50 $233.00 $284.00 $355.00 2 Z\x x 2C\v
4 4.80 6.4 204.50 272.50 357.50 475.00 2 B\, x 3Z\v
6 6.90 8.5 303.50 395.00 453.50 589.50 2 B\, x 3Z\v
8 9.05 15.4 445.00 604.00 671.00 912.00 2 C\v x 5
10 11.10 22.5 588.50 817.50 811.50 1098.50 2 C\v x 5
12 13.20 30.0 863.00 1174.50 1076.00 1106.00 2 M\, x 5
14 15.30 40.8 1003.50 1379.00 1467.00 2011.50 4 1 x 3Z\x
16 17.40 61.3 1266.50 1992.50 1725.50 2716.00 4 1 x 3Z\x
18 19.50 80.0 1579.00 2292.50 2033.50 2951.00 4 1 x 3Z\x
20 21.60 76.0 1846.00 2541.00 2377.00 3273.50 4 1Z\, x 4
24 25.80 104.0 2361.50 3301.50 3164.00 5092.00 6 1Z\, x 4
30 32.00 162.0 4649.50 6173.00 5408.00 7963.00 6 1Z\, x 4
36 38.30 200.0 5284.50 7140.00 6031.00 + 6 1Z\, x 4
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Sizes 4’’ – 16’’ are UL Listed/FM Approved for underground fire protection water supply systems.
+ Quoted on application. Contact Victaulic for pricing and availability.
3
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
Style 307 Transition Coupling
Transition Coupling
STYLE 307
(For connecting AWWA to IPS pipes, valves, and fittings)Refer to publication 23.03.
STYLE 307 – GRADE “S” OR “M” FLUSH-SEAL™ GASKET
PIPE Inches
Approx. Wgt. Ea.
COUPLING COMPLETE With Grade “M” or “S”
Flush-Seal Gasket and Plated Bolts
& Nut †
Coupling Complete w/Grade
“M” or “S” Flush-Seal Gasket
and Stainless Steel Bolt & Nut † SPARE PARTS
Nom. Size
Mating Pipe O.D.
lb
Price Each Price Each Bolt & NutIPS
SteelAWWA Ductile Painted Galv. Painted Galv. No. *
Size Inches
3 3.50 3.96 6.0 $288.00 $386.00 $503.00 $601.50 2 Z\x x 2C\v
4 4.50 4.80 8.0 330.00 453.50 675.50 934.39 2 Z\x x 3Z\v
6 6.63 6.90 9.0 401.00 545.00 710.50 940.50 2 B\, x 3Z\v
8 8.63 9.05 18.0 499.50 741.00 704.50 1047.00 2 C\v x 5
10 10.75 11.10 22.0 640.50 942.00 809.50 1188.50 2 M\, x 6Z\x
12 12.75 13.20 31.1 850.50 1268.00 1009.00 1125.50 2 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Style 341 Vic-Flange Adapter
Vic-Flange Adapter
STYLE 341Refer to publication 23.04.
STYLE 341 – GRADE “S” OR “M” GASKET
PIPE Inches
Approx. Wgt. Each
Vic-Flange Adapter Complete with Grade “S” or “M”
Gasket †
Nominal Size
Outside Diameter lb
Price EachPainted Galv.
STYLE 341 - Hinged3 3.96 5.4 $322.00 $404.004 4.80 8.2 357.50 467.506 6.90 12.0 469.50 624.008 9.05 17.4 593.00 803.50
10 11.10 24.6 867.50 1171.5012 13.20 34.4 1127.50 1543.50
STYLE 341 - Four Piece14 15.30 61.0 $2289.50 $3028.5016 17.40 80.0 2647.50 3578.5018 19.50 98.8 3249.00 4395.0020 21.60 113.9 3908.50 5250.0024 25.80 134.9 5002.50 6633.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Flange adapters sizes 4 – 12” are UL Listed/FM Approved for underground fire protection water supply systems.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
VICTAULIC.COM PL2017-AWWA4
Products for AWWA Grooved End Pipe
Flange Parts – Style 341
Flange Parts
FOR STYLE 341 VIC-FLANGE ADAPTERS
FOR STYLE 341 VIC-FLANGE ADAPTERS
PIPE Inches
Flange Washers
“S” or “M” Gasket
Silicone “L” Gasket
Nominal Size Price Each
STYLE 341 - Hinged3 $138.50 $77.50 +4 161.00 77.50 +6 222.00 86.00 +8 279.50 98.00 +
10 386.50 112.50 +12 564.50 133.50 +
STYLE 341 - Four Piece14 $615.00 $149.00 +16 1092.00 161.50 +18 1164.50 227.50 +20 + 246.00 +24 + 271.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style 31 and 307 Gaskets
Gaskets GASKETS FOR STYLES 31 AND 307
Nom. Size Style 31 Style 307
InchesOutside
Dia.
Grade “S” or “M” Flush-Seal Gasket Only
Price Ea.
Grade “L” Silicone
Flush-Seal Gasket Only
Price Ea.
Grade “S” or “M” Flush-Seal Gasket Only
Price Ea.Price Each
3 3.96 $55.50 $218.00 $123.004 4.80 60.00 236.00 127.506 6.90 119.50 276.50 138.008 9.05 158.00 340.50 153.00
10 11.10 177.50 393.50 266.5012 13.20 209.00 411.50 276.0014 15.30 230.50 447.00 –16 17.40 299.00 540.00 –18 19.50 373.00 770.50 –20 21.60 496.50 904.50 –24 25.80 677.00 994.50 –30 32.00 1759.50 + –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
5
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
Plated Bolts and Nuts
Plated Bolts and Nuts PLATED BOLTS AND NUTS
Bolt and Nut Size
Inches Price EachZ\x x 2 C\v $22.00
3 Z\v 22.00B\, x 3 Z\v 25.00C\v x 5 39.00M\, x 5 51.50
6 Z\x 64.001 x 3 Z\x 55.50
1Z\, x 4 86.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Ring Shouldered Joint Check Sheet
VICTAULIC.COM PL2017-AWWA6
Products for AWWA Grooved End Pipe
Vic-Ring Check Sheet for W07/W77/W89 AGS CouplingsSend US, Asia, and Europe inquiries to: [email protected] or fax to: 610-923-3010To speak with a Customer Service representative in the US, please call 1-800-PICK-VIC In Canada, please e-mail [email protected] or fax 905-884-7446
TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW:
APPLICATION DATA:NOMINAL PIPE SIZE: ACTUAL PIPE OD: WALL THICKNESS:
CARBON STEEL: GRADE - SCHEDULE - CLASS-
STAINLESS STEEL: TYPE - SCHEDULE -
DUCTILE IRON: PRESSURE - CLASS -
SYSTEM WORKING PRESSURE (PSI): TEST/PROOF PRESSURE (PSI): TEMPERATURE (DEG. F):
MEDIA/SERVICE:
DISTRIBUTOR INFORMATION:DISTRIBUTOR: DISTRIBUTOR CONTACT NAME:
COMPANY: PHONE:
ADDRESS: FAX:
CITY, STATE, ZIP: E-MAIL:
PROJECT INFORMATION:PROJECT NAME: QUOTE NEEDED BY (date):
CITY & STATE: BID DATE:
PROJECT SPEC. INCLUDED REQUESTED SHIPPING DATE:
ENGINEERING FIRM: CONTACT NAME:
CITY & STATE: PHONE:
6287 Rev B Updated 06/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com1
The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping System expert who is experienced in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic Company’s Vic-Ring submittals available at www.victaulic.com.
CONTRACTOR INFORMATION:CONTRACTOR: CONTRACTOR CONTACT NAME:
COMPANY: PHONE:
ADDRESS: FAX:
CITY, STATE, ZIP: E-MAIL:
CONFIGURATION INFORMATION:COUPLING: STYLE - DISTRIBUTOR CONTACT NAME:
RINGS: SIZE (=PIPE O.D.) - QTY: (PER JOINT - PIPE TO PIPE CONNECTIONS REQUIRE TWO RINGS)
LINING OPTIONS:
UNLINED
FLUSH OVERHUNG
ABRASION
RUBBER LINED - FLUSH RUBBER LINED - OVERHUNG
RUBBER LINED WITH PROTECTIVE BUMPER - FLUSH
RUBBER LINED WITH PROTECTIVE BUMPER - OVERHUNG
CHROMIUM CARBIDE OVERLAY (CCO)
ABRASION AND CORROSION
RUBBER LINED - FLUSH RUBBER LINED - OVERHUNG
7
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
Style 41 Coupling
Vic-Ring CouplingsStyle 41 and 44 couplings are used in conjunction with Vic-Ring adapters when it is not possible to direct groove pipe. Pipe to pipe con-nections require two Vic-Ring adapters per joint. Contact Victaulic for pricing on Vic-Ring adapters. For further information on the Vic-Ring system request publication 16.01.
Style 41 CouplingsRefer to publication 16.04.
STYLE 41 COUPLINGS
PIPE O.D.
Max. Work. Pressure
Type “D” or “E” Joint Spare Parts
Inches psi Price Each No.Bolt Dim. Size
InchesBolt/Nut Price Ea.
Grade “E” Gasket
Price Ea.30 90 + 6 1Z\, x 5Z\x $86.00 $1111.50
36 90 + 6 1Z\, x 5Z\x 86.00 1354.50
38 90 + 6 1Z\v x 5Z\x 249.50 1428.00
42 90 + 8 1C\, x 5C\v 290.00 1483.50
46 90 + 8 1Z\x x 5C\v 311.00 1483.50
48 90 + 8 1C\v x 6 542.50 1689.00
54 90 + 8 1C\v x 6 542.50 1856.50
60 90 + 10 1M\, x 6 718.00 2157.50
66 90 + 24 1Z\x x 5C\v 311.00 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 44 Coupling
Style 44 CouplingsRefer to publication 16.05.
STYLE 44 COUPLINGS
PIPE O.D.
Max. Work. Pressure
Type “D” or “E” Joint Spare Parts
Inches psi Price Each No.Bolt Dim. Size
InchesBolt/Nut Price Ea.
Grade “E” Gasket
Price Ea.4 175 + 2 B\, x 4 $33.50 $109.50
6 175 + 2 B\, x 4 33.50 194.00
8 175 + 2 C\v x 5 39.00 200.50
10 175 + 2 C\v x 5 39.00 207.00
12 175 + 2 M\, x 5Z\x 58.50 270.50
14 175 + 4 1 x 3Z\x 55.50 308.50
16 175 + 4 1 x 3Z\x 55.50 355.50
18 175 + 4 1 x 3Z\x 55.50 439.50
20 175 + 4 1Z\v x 5Z\x 249.50 589.50
24 175 + 6 1Z\v x 3Z\x 86.00 817.50
30 175 + 6 1Z\x x 5C\v 311.00 1111.50
36 175 + 6 1Z\x x 5C\v 311.00 1354.50
42 175 + 8 1C\v x 6 542.50 1483.50
48 175 + 16 1C\, x 5C\v 290.00 1689.00
54 175 + 16 1Z\x x 5C\v 311.00 1856.50
60 175 + 20 1Z\x x 5C\v 311.00 2157.50
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Bolted Split-Sleeve Couplings
For pricing on Victaulic Bolted Split-Sleeve Couplings, refer to PL2017-VBSP.
VICTAULIC.COM PL2017-AWWA8
Products for AWWA Grooved End Pipe
AWWA VALVES, Plug Valve Disc Coating/Seal Options
Series 365 Plug Valves
Plug Valve Disc Coating/Seal Options
SERIES 365Refer to publication 23.06.
Optional plug seal coatings are available – pricing and availability on application. Valve supplied standard with Nitrile (Grade “T”) coated plug. Contact Victaulic for details.
• Grade “E” EPDM – (P- _ _ _ 7121-00)
• Grade “O” Fluoroelastomer – (P- _ _ _ 7131-00)
P - 080 - 7 1 1 1 - 80
TypePressure
Rating Body Material Plug Coating Seat OperatorP 030
040060080100120
3"/804"/1006"/1508"/20010"/25012"/300
7 - 175 psi full bi-directional (1)
1 - Iron3 - Coated iron (2)7 - Glass lined
1 - Nitrile - “T”2 - EPDM - “E”3 - Fluoroelastomer - “O”
1 - Nickel7 - Glass Lined/ Nickel Seat
(1) Details must be supplied with order.(2) 3, 4 and 6"/80, 100 and 150 mm only.
Nom.In./mm
SizeCode
00 - Bare01 - 2" Hub Nut Only10 - Std. Handle (2)11 - Std. Handle with memory stop (2)80 - Gear Op w/Handwheel81 - Gear Op w/2" Nut82 - Gear Op w/Chainwheel99 - Special (1)
Series 365 with Operators
Series 365 Plug Valves with OperatorsRefer to publication 23.06.
SERIES 365 WITH OPERATORS
Nom. Size
inches Bare With Lever
Gear Op. w/ Handwheel or
2” nutGear Op.
w/ Chainwheel3 $1196.00 $1330.00 $2088.00 $2645.504 1265.00 1430.50 2311.00 2929.506 1801.50 1913.00 2589.00 3125.008 2803.00 – 4129.50 5480.00
10 4234.00 – 6630.50 8315.5012 5484.00 – 8388.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
List Adders for Valves
List Adders for Plug Valves
SERIES 365 LIST ADDERS
Nom. Size inches Glass Lining
Epoxy Lining Interior
Epoxy Coating Exterior
3 $652.50 $235.00 $176.504 714.00 235.00 207.006 763.00 281.00 229.008 1029.00 384.00 288.00
10 1169.00 453.50 339.0012 1364.00 639.00 380.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Epoxy paints included in above are Tnemec Series 66, 69, 104, 135, 140, T1, and Wasser MC-FerroClad.
9
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
Gear Operator Accessories for Series 365 Plug Valves
Gear Operator Accessories for Series 365 Plug Valves
GEAR OPERATOR ACCESSORIES
Size inches
Handwheel Only 2” Nut Chain Wheel Kit
Gear Operator
OnlyChain
Per Foot3 $214.50 $214.50 $621.50 $1606.00 $16.004 214.50 214.50 621.50 1606.00 16.006 214.50 214.50 880.00 1606.00 16.008 367.50 214.50 1141.00 1606.00 16.00
10 367.50 214.50 1141.00 2827.50 16.0012 367.50 214.50 1141.00 4628.00 16.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES 365 VALVE EXTENSION STEMS – CARBON STEEL STEM WITH 2” SQUARE NUT ON TOP
Valve Size inches
Stem Diameter inches
1st 5 ft. with pin top & bottom Each additional foot
3 – 10 1 + +12 1Z\v + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Stainless steel extension stems available priced on application. Contact Victaulic for pricing and availability.
NOTE: For automatic actuation, contact your local valve automation center for pricing and availability.
VICTAULIC.COM PL2017-AWWA10
Products for AWWA Grooved End Pipe
Series 317 AWWA Check Valve
Series 317 AWWA Check ValvesRefer to publication 23.09.
Bare Arm and Weight Arm and SpringArm and Air
CushionSERIES 317 AWWA CHECK VALVES
Nom. Size
Bare Bronze Seat or “T” Nitrile Seat
Arm and Weight Bronze Seat or “T” Nitrile Seat
Arm and Spring Bronze Seat or “T” Nitrile Seat
Arm and Air Cushion Bronze Seat or “T” Nitrile Seat
inches
Approx. Wgt. Each
lbPrice Each
Approx. Wgt. Each
lbPrice Each
Approx. Wgt. Each
lbPrice Each
Approx. Wgt. Each
lbPrice Each
3 50.0 $1501.00 57.0 $2702.00 54.0 $2702.00 65.0 3087.504 70.0 2001.00 77.0 3200.50 74.0 3200.50 85.0 $3587.506 120.0 2667.50 127.0 3867.00 124.0 3867.00 135.0 4619.508 225.0 4320.50 242.0 5368.00 233.0 5368.00 259.0 6399.00
10 350.0 6873.00 367.0 7698.50 358.0 7698.50 384.0 9830.0012 460.0 8994.50 477.0 10196.50 468.0 10196.50 494.0 13794.50
NOTE: Taps available as special order. Contact Victaulic for details.
NOTE: Specify choice on order.
Series 317 Kits
Series 317 Kits SERIES 317 KITS
Nominal Size Kits - Price Each
inches Arm and Weight Arm and Spring Arm and Air Cushion3 $1375.00 $1375.00 $2568.504 1375.00 1375.00 2568.506 1375.00 1375.00 2887.008 1375.00 1375.00 3532.00
10 1375.00 1375.00 5270.0012 1375.00 1375.00 7596.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Note: Kits include all hardware and instructions necessary to field-convert valve to desired option.
11
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
List Adders for Check Valves
List Adders for Check Valves
SERIES 317 LIST ADDERS
Nom. Size inches
Epoxy Lining Interior
Epoxy Coating Exterior
3 $229.50 $176.504 229.50 206.006 229.50 229.008 229.50 288.00
10 229.50 339.0012 229.50 379.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Epoxy paints included in above are Tnemec Series 66, 69, 104, 135, 140, T1, and Wasser MC-FerroClad.
C - - -040 1 1 10
PressureRating Body Material
Closure CouplingGasket Grade Seat Accessories*
*Details must be supplied with order.**Details of coating must be supplied with order.
Act.In./mm
SizeCode
11
Type
10 - Bare shaft on right side of valve11 - Lever with Adjustable Spring mounted on right side of valve12 - Lever with Weight mounted on right side of valve13 - Air Cushion with Adjustable Spring mounted on right side of valve20 - Bare shaft on left side of valve21 - Lever with Adjustable Spring mounted on left side of valve22 - Lever with Weight mounted on left side of valve23 - Air Cushion with Adjustable Spring mounted on left side of valve
9 - Special*
1 - Bronze2 - (T) Nitrile3 - (E) EPDM4 - (V) Neoprene5 - (O) Fluoroelastomer
9 - Special*
1 - Iron3 - Coated Iron**7 - Glass lined
9 - Special*
1 - 175 psi
9 - Special*
030040060080100120
3/804/1006/1508/20010/25012/300
C 1 - (S) Nitrile2 - (M) Hologenated Butyl3 - (V) Neoprene4 - (O) Fluoroelastomer
9 - Special*
Series 318 Sump Ejector Kit
Series 318 Sump Ejector Kit *Refer to publication 23.12.
SERIES 318 SUMP EJECTOR KIT
Size inches
Wgt. Assembled Price Each
3 91.4 $4341.004 128.8 4946.006 221.4 6941.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES 318 – SUMP EJECTOR KIT CONSISTS OF THE FOLLOWING COMPONENTS:
Quantity Component1 Series 365 Plug Valve1 Series 317 AWWA Check Valve † 2 Style 307 Transition Coupling1 Style 31 AWWA Coupling
* Kits are supplied unassembled.† Arm and Spring Kit standard.
VICTAULIC.COM PL2017-AWWA12
Products for AWWA Grooved End Pipe
AWWA FITTINGS
AWWA Fittings
Refer to publication 23.05. • Conform to AWWA C-606 rigid groove specifications and ANSI A-21.10/AWWA C-110 end to end dimensions.
• Fittings supplied with an alkyd phenolic primer. Optional coatings/linings include coal tar epoxy, organic zinc-rich primer, cement and others. Cast surfaces equivalent to SSPC-SP6 prior to coating unless otherwise specified. Contact Victaulic with details when ordering special coatings/linings.
• Flanged by grooved fittings available upon request. Contact Victaulic for details.
Fitting Coating Options
Coating Options Victaulic fittings are available in a variety of coatings. This is a list of the most common coatings. Victaulic fittings are supplied with a Tnemec Series 37-77 unless specified otherwise.
Coating % IncreaseAsphalt 0
Tnemec Series 37-77 0Tnemec Series 20 +Tnemec Series 66 8Tnemec Series 69 8
Tnemec Series 90 - 97 8Tnemec Series 104 8
Coating % IncreaseTnemec Series 135 8Tnemec Series 140 8Tnemec Series 160 +Tnemec Series 161 +
Coal Tar Epoxy (T46H413) 17Tnemec Series 1 8
Wasser MC-FerroClad 8
+ Contact Victaulic for product details.
13
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
Tapped Fittings
Tapping LocationsRefer to publication 23.05.
Tapped Fittings
Victaulic can supply tapped fittings on order to ANSI B16.1 dimension locations.
Specify fitting size, tap location by letter (as shown below) and tap size – NPT dimensions on order.
Tap price must be added after calculating coating pricing.
Cast iron fittings cannot be tapped per table below. Contact Victaulic for details.
KL
M
N
R
S
T
EH
G
F
R
S
T
45° Lateral Straight & Reducing
Y
M
K
NT
R
Y
G
E
F T
R
90° Elbow Straight Size
EG
F
R K M
N
R
90° Base Elbow Straight & Reducing
R
S
T
L
MN
K
R
S
T
H
EFG
Tee Straight Size
VY
T
R
KMN
VY
T
R
E GF
90° Elbow Reducing Size
S
90° Elbow
H
G
FJE
L
M
NKP
Cross Straight Size
X Y Z
T S R
F G H
Z Y X
R S TN M K
Eccentric Reducer
MN
KR
S
TG F
ER
S
T
45° Elbow Base Fittings
EG
HF
T R
KM
NL
R T
Base Tee
F HG
KNM
Concentric Reducer
E HG
F
L KM
N
True “Y”
CAST FITTINGS
Tap Size Positions Y and V Positions – Otherinches 12” and below 14” and above 12” and below 14” and above
Z\x $747.50 $1073.50 $580.50 $943.00C\v 747.50 1430.50 701.50 1010.001 881.50 1430.50 734.50 1085.50
1Z\v 1128.00 1668.50 760.50 1175.501Z\x 1268.50 1668.50 791.00 1175.50
2 1354.50 2143.00 895.00 1274.502Z\x 2705.50 + 1174.50 1480.50
3 3677.00 + 1300.00 1689.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.No. 10-C 90° Elbow, No. 11-C 45° Elbow
VICTAULIC.COM PL2017-AWWA14
Products for AWWA Grooved End Pipe
ElbowsRefer to publication 23.05.
No. 10-C
No. 11-C
ELBOWS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 10-C 45° Elbow No. 11-C
inches
Weight Each
lb
Price Each Weight Each
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 8.6 $302.00 $316.00 5.8 $258.50 $270.504 12.0 314.00 329.50 8.4 332.50 349.506 22.0 503.00 527.50 15.0 478.00 502.008 38.0 776.50 816.00 28.8 714.50 748.50
10 76.0 1287.50 1351.50 43.3 1156.00 1213.5012 92.0 1842.50 1934.00 72.0 1683.00 1766.0014 174.0 2810.00 2949.50 104.0 2218.50 2329.0016 239.0 3328.50 3494.00 142.0 2847.00 2989.0018 328.0 4601.00 4833.00 186.0 3755.50 3943.5020 413.0 5922.50 6218.00 246.0 4860.00 5102.0024 668.0 9183.50 9642.50 414.0 7305.00 7671.0030 1002.0 16372.00 17190.50 720.0 13428.00 14099.0036 1608.0 24441.50 25663.50 1152.0 21051.50 22104.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
No. 12-C 22Z\x° Elbow, No. 13-C 11Z\v° Elbow
ElbowsRefer to publication 23.05.
No. 12-C
No. 13-C
ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW
Nom. Size 22Z\x° Elbow No. 12-C 11Z\v° Elbow No. 13-C
inches
Weight Each
lb
Price Each Weight Each (lbs)
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 # 8.7 + + 6.7 + +4 # 11.5 $376.00 $402.50 11.5 $469.50 $503.006 # 25.0 527.50 553.50 21.5 657.00 690.508 # 39.5 857.50 900.50 39.0 1071.00 1125.00
10 # 67.0 1667.50 1732.00 41.0 1950.50 2015.0012 # 108.0 2287.50 2386.50 60.0 2354.50 2438.0014 112.0 2292.50 2406.50 108.0 2400.50 2521.0016 128.0 2951.00 3098.50 121.0 2951.00 3098.5018 185.0 3975.00 4174.50 170.0 3975.00 4174.5020 200.0 5207.00 5466.50 169.0 5207.00 5466.5024 282.0 7846.00 8239.00 237.0 7846.00 8239.0030 + + + + + +36 + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
# Cast Iron.
15
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
No. 100-C 90° Long Radius Elbow
Long Radius Elbows
NO. 100-CRefer to publication 23.05.
90° LONG RADIUS ELBOWS
Nom. Size
Weight Each Price Each †
inches lbTnemec 37-77
Cement Lined
3 + + +4 28.0 $447.00 $469.506 55.0 799.50 842.508 83.0 1448.00 1503.00
10 160.0 2418.00 2535.0012 130.0 3070.00 3202.5014 318.0 4234.50 4446.5016 404.0 5579.00 5892.5018 537.0 7935.50 8331.5020 694.0 10233.00 10732.5024 1090.0 15738.50 16526.5030 + + +36 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† 45° Long Radius Elbow also available, priced on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
VICTAULIC.COM PL2017-AWWA16
Products for AWWA Grooved End Pipe
No. 10-CR Reducing Elbow
Reducing Elbows
NO. 10-CRRefer to publication 23.05.
REDUCING ELBOWS
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
4 x 3 17.0 $861.50 $904.506 x 3 28.5 934.50 1092.00
4 # 29.6 818.50 860.508 x 4 # 46.5 1010.50 1061.00
6 48.5 1203.00 1264.0010 x 4 # 65.0 + +
6 # 77.0 1599.50 1677.508 # 88.0 1866.50 1959.00
12 x 4 + + +6 90.0 2788.00 2926.508 98.0 2788.00 2926.50
10 102.0 2788.00 2926.5014 x 6 + + +
8 135.0 2902.00 3047.5010 170.0 2902.00 3047.5012 195.0 2902.00 3047.50
16 x 6 + + +8 + + +
10 195.0 3220.50 3381.5012 240.0 3220.50 3381.5014 280.0 3220.50 3381.50
18 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 380.0 4351.50 5858.00
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
20 x 6 + + +8 + + +
10 + + +12 + + +14 405.0 $5611.00 $5905.5016 + + +18 485.0 5611.00 5905.50
24 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +18 + + +20 + + +
30 x 12 + + +14 + + +16 + + +18 + + +20 + + +24 + + +
36 x 12 + + +14 + + +16 + + +18 + + +20 + + +24 + + +30 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
# Cast Iron.
All fittings ductile iron unless otherwise noted.
17
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
No. 20-C Tee, No. 30-C 45° Lateral
Tee or LateralRefer to publication 23.05.
No. 20-C
No. 30-C
TEE OR LATERAL
Nominal Size Tee No. 20-C 45° Lateral No. 30-C
inches
Weight Each
lb
Price Each Weight Each
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 14.2 $402.00 $414.50 20.7 $724.00 $758.504 19.0 470.50 493.00 38.4 903.00 947.506 34.0 649.50 681.00 67.0 1538.50 1613.508 59.0 955.00 1000.50 120.0 1821.00 1910.50
10 111.0 1895.00 1989.00 144.0 4153.00 4281.0012 136.0 2651.00 2783.50 242.0 5951.00 6051.5014 262.0 3837.00 4027.50 372.0 6327.50 6643.5016 304.0 5010.00 5260.00 500.0 8216.50 8626.0018 408.0 6920.00 7266.50 596.0 11247.50 11809.0020 552.0 8458.00 8880.00 1103.0 14577.50 15306.0024 980.0 15257.00 15926.00 1746.0 21657.00 22739.0030 1552.0 26039.00 27340.50 + + +36 2050.0 38261.50 40175.00 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
# Cast Iron.
All fittings ductile iron unless otherwise noted.
No. 60-C Cap, No. 35-C Cross
Cap or CrossRefer to publication 23.05.
No. 60-C
No. 35-C
CAP OR CROSS
Nominal Size Cap ‡ § No. 60-C Cross No. 35-C
inches
Weight Each
lb
Price Each Weight Each
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 3.0 $178.00 $187.00 + + +4 5.0 178.00 187.00 40.0 $1031.00 $1081.506 9.3 264.00 276.00 71.0 1726.00 1694.008 16.0 371.00 387.50 106.0 2497.50 2623.50
10 37.2 591.00 620.50 120.0 2497.50 3174.5012 52.0 803.50 847.50 158.0 4530.00 4756.5014 52.0 1064.50 1116.50 307.0 4989.50 5239.5016 68.0 1397.00 1467.00 426.0 6116.00 5239.5018 90.0 1921.50 2017.50 562.0 7872.00 8264.5020 110.0 2280.00 2393.00 + + +24 165.0 3731.00 3917.00 + + +30 300.0 5172.50 6190.00 + + +36 536.0 8171.50 9367.50 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
‡ Caps tapped pricing: Z\x - C\v’’ $223.50; 1’’ $285.00; 1Z\v - 1Z\x’’ $374.00; 2’’ $$382.00; 2Z\x” $550.00; 3’’ $619.50§ All caps with taps are non-cancellable and non-returnable.
All fittings ductile iron unless otherwise noted.
VICTAULIC.COM PL2017-AWWA18
Products for AWWA Grooved End Pipe
No. 25-C Reducing Tee
Reducing Tees
NO. 25-CRefer to publication 23.05.
No. 25-C
REDUCING TEES
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
4 x 3 # 26.4 $446.50 $468.006 x 3 53.0 615.00 647.50
4 46.0 615.00 647.508 x 4 # 78.0 906.00 951.00
6 # 80.0 906.00 951.0010 x 4 120.0 1800.00 1891.00
6 128.0 1800.00 1891.008 130.0 1800.00 1891.00
12 x 4 112.0 2517.00 2645.006 180.0 2517.00 2645.008 186.0 2517.00 2645.00
10 192.0 2517.00 2645.0014 x 6 238.0 3967.00 3967.00
8 241.0 3967.00 3967.0010 310.0 3967.00 3967.0012 328.0 3967.00 3967.00
16 x 6 268.0 4760.00 4997.008 290.0 4760.00 4997.00
10 319.0 4760.00 4997.0012 330.0 4760.00 4997.0014 341.0 4760.00 4997.00
18 x 6 320.0 6574.00 6902.008 326.0 6574.00 6902.00
10 332.0 6574.00 6902.0012 339.0 6574.00 6902.0014 441.0 6574.00 6902.0016 453.0 6574.00 6902.00
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
20 x 6 405.0 $8035.50 $8437.008 412.0 8035.50 8437.00
10 419.0 8035.50 8437.0012 426.0 8035.50 8437.0014 443.0 8035.50 8437.0016 571.0 8035.50 8437.0018 584.0 8035.50 8437.00
24 x 6 570.0 14409.50 15129.508 578.0 14409.50 15129.50
10 586.0 14409.50 15129.5012 593.0 14409.50 15129.5014 610.0 14409.50 15129.5016 620.0 14409.50 15129.5018 918.0 14409.50 15129.5020 937.0 14409.50 15129.50
30 x 12 1175.0 26351.00 27669.0014 1250.0 26351.00 27669.0016 1437.0 26351.00 27669.0018 1450.0 26351.00 27669.0020 1462.0 26351.00 27669.0024 1475.0 26351.00 27669.00
36 x 12 + 37579.00 39455.5014 + + +16 + + +18 + + +20 + + +24 + 37579.00 39455.5030 + 37579.00 39455.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
# Cast Iron.
19
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
No. 30-CR Reducing Lateral, No. 100-CR 90° Long Radius Elbow
Reducing FittingsRefer to publication 23.05.
No. 30-CR Reducing Lateral
No. 100-CR 90° Long Radius Reducing Elbow
REDUCING FITTINGS – REDUCING LATERAL OR 90° LONG RADIUS REDUCING ELBOW
Nominal Size Reducing Lateral No. 30-CR90° Long Radius Reducing Elbow
No. 100-CR †
inchesWgt. Ea.
lb
Price EachWgt. Ea.
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
4 x 3 45.0 $845.50 $920.50 + + +6 x 3 74.0 1439.00 1490.50 + + +
4 80.0 1439.00 1490.50 + + +8 x 4 125.0 2132.00 2209.00 + + +
6 140.0 2132.00 2209.00 + + +10 x 4 204.0 2724.50 2910.00 + + +
6 212.0 2724.50 2910.00 + + +8 236.0 2724.50 2910.00 + + +
12 x 4 290.0 5468.50 5667.00 + + +6 302.0 5468.50 5667.00 + + +8 324.0 5468.50 5667.00 + + +
10 356.0 5468.50 5667.00 + + +14 x 6 330.0 6147.50 6455.50 + + +
8 346.0 6147.50 6455.50 + + +10 + + + + + +12 + + + + + +
16 x 6 + + + + + +8 + + + + + +
10 + + + + + +12 + + + + + +14 + + + + + +
18 x 6 + + + + + +8 + + + + + +
10 + + + + + +12 + + + + + +14 + + + + + +16 + + + + + +
20 x 6 + + + + + +8 + + + + + +
10 + + + + + +12 + + + + + +14 + + + + + +16 + + + + + +18 + + + + + +
24 x 6 + + + + + +8 + + + + + +
10 + + + + + +12 + + + + + +14 + + + + + +16 1651.1 21455.00 22536.00 + + +18 910.2 21455.00 22536.00 + + +20 + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Long radius reducing base 90° elbows are available. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
VICTAULIC.COM PL2017-AWWA20
Products for AWWA Grooved End Pipe
No. 30-CR Reducing Lateral, No. 100-CR 90° Long Radius Elbow
Reducing FittingsRefer to publication 23.05.
No. 30-CR Reducing Lateral
No. 100-CR 90° Long Radius Reducing Elbow
REDUCING FITTINGS – REDUCING LATERAL OR 90° LONG RADIUS REDUCING ELBOW
Nominal Size Reducing Lateral No. 30-CR90° Long Radius Reducing Elbow
No. 100-CR †
inchesWgt. Ea.
lb
Price EachWgt. Ea.
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
30 x 12 + + + + + +14 + + + + + +16 + + + + + +18 + + + + + +20 + + + + + +24 + + + + + +
36 x 12 + + + + + +14 + + + + + +16 + + + + + +18 + + + + + +20 + + + + + +24 + + + + + +30 + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Long radius reducing base 90° elbows are available. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
21
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
No. 35-CR Reducing Cross
Reducing FittingsRefer to publication 23.05.
No. 35-CR Reducing Cross
REDUCING FITTINGS – REDUCING CROSS
Nominal Size Reducing Cross No. 35-CR
inchesWgt. Ea.
lb
Price EachTnemec 37-77
Cement Lined
4 x 3 + + +6 x 3 + + +
4 + + +8 x 4 + + +
6 + + +10 x 4 + + +
6 + + +8 + + +
12 x 4 + + +6 + + +8 + + +
10 + + +14 x 6 + + +
8 + + +10 + + +12 + + +
16 x 6 + + +8 + + +
10 + + +12 + + +14 + + +
18 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +
Nominal Size Reducing Cross No. 35-CR
inchesWgt. Ea.
lb
Price EachTnemec 37-77
Cement Lined
20 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +18 + + +
24 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +18 + + +20 + + +
30 x 12 + + +14 + + +16 + + +18 + + +20 + + +24 + + +
36 x 12 + + +14 + + +16 + + +18 + + +20 + + +24 + + +30 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Non standard reducing crosses are available. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
VICTAULIC.COM PL2017-AWWA22
Products for AWWA Grooved End Pipe
No. 50-C Concentric Reducer
Concentric Reducer
NO. 50-CRefer to publication 23.05.
No. 50-C
CONCENTRIC REDUCER
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
4 x 3 # 10.0 $452.00 $474.006 x 3 15.0 657.00 680.00
4 # 16.5 657.00 680.008 x 3 + + +
4 # 28.0 813.50 855.006 # 34.0 813.50 855.00
10 x 4 # 42.0 1229.50 1293.506 # 46.0 1229.50 1293.508 # 50.0 1229.50 1293.50
12 x 4 # 66.8 1794.00 1886.006 # 70.0 1794.00 1886.008 # 74.0 1794.00 1886.00
10 # 84.0 1794.00 1886.0014 x 6 89.0 2421.00 2541.50
8 102.0 2421.00 2541.5010 112.0 2421.00 2541.5012 126.0 2421.00 2541.50
16 x 6 + + +8 122.0 3705.00 3868.00
10 135.0 3705.00 3868.0012 146.0 3705.00 3868.0014 173.0 3705.00 3868.00
18 x 6 + + +8 + + +
10 158.0 5080.00 5333.50
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
18 x 12 173.0 $5080.00 $5333.5014 200.0 5080.00 5333.5016 220.0 5080.00 5333.50
20 x 6 + + +8 173.0 6213.00 6522.50
10 182.0 6213.00 6522.5012 201.0 6213.00 6522.5014 230.0 6213.00 6522.5016 251.0 6213.00 6522.5018 275.0 6213.00 6522.50
24 x 6 + + +8 + + +
10 + + +12 293.0 9175.00 9634.0014 331.0 9175.00 9634.0016 358.0 9175.00 9634.0018 386.0 9175.00 9634.0020 418.0 9175.00 9634.00
30 x 18 + + +20 693.0 12081.00 12686.0024 770.0 12081.00 12686.00
36 x 20 1280.0 18005.00 19183.5024 1370.0 18005.00 19183.5030 + 18005.00 19183.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
# Cast Iron.
All fittings ductile iron unless otherwise noted.
23
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
No. 51-C Eccentric Reducer
Eccentric Reducers
NO. 51-CRefer to publication 23.05.
No. 51-C
ECCENTRIC REDUCERS
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
4 x 3 12.0 $559.50 $589.506 x 3 20.0 696.50 732.50
4 25.0 696.50 732.508 x 4 35.0 1010.50 1061.50
6 44.0 1010.50 1061.5010 x 4 54.0 1532.50 1612.00
6 60.0 1532.50 1612.008 70.0 1532.50 1612.00
12 x 4 82.0 2231.00 2342.506 84.0 2231.00 2342.508 91.0 2231.00 2342.50
10 110.0 2231.00 2342.5014 x 6 + + +
8 + + +10 135.0 2422.00 2541.5012 150.0 2422.00 2541.50
16 x 6 + + +8 + + +
10 168.0 3704.50 3868.0012 190.0 3704.50 3868.0014 + + +
Nominal Size
Weight Each Price Each
inches lbTnemec 37-77
Cement Lined
18 x 8 + + +10 + + +12 + + +14 + + +16 + + +
20 x 10 + + +12 250.0 $6214.50 $6522.5014 270.0 6214.50 6522.5016 300.0 6214.50 6522.5018 + + +
24 x 12 + + +14 + + +16 + + +18 465.0 9672.00 10111.5020 + + +
30 x 18 + + +20 + + +24 + 12081.00 12686.00
36 x 20 + + +24 + + +30 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
All No. 51-C fittings are globally sourced ductile iron.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
VICTAULIC.COM PL2017-AWWA24
Products for AWWA Grooved End Pipe
No. 21-C Bullhead Tee
Bullhead Tee
NO. 21-CRefer to publication 23.05.
No. 21-C
BULLHEAD TEE
Nominal SizeWeight Each Price Each
inches lbTnemec 37-77
Cement Lined
4 x 4 x 6 # 65.0 + +6 x 6 x 8 # 100.0 + +8 x 8 x 10 # 185.0 + +
10 x 10 x 12 # 250.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
# Cast Iron.
No. 33-C True Wye
True Wye
NO. 33-CRefer to publication 23.05.
No. 33-C
TRUE WYE
Nominal Size Weight Each Price Eachinches lb Tnemec 37-77 Cement Lined
3 25.0 + +4 35.0 + +6 60.0 + +8 90.0 + +
10 141.0 + +12 195.0 + +14 + + +16 + + +18 + + +20 + + +24 + + +30 + + +36 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
25
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
Base FittingsNo. 10-CB 90° Base Elbow, No. 20-CB Base Tee
Base FittingsRefer to publication 23.05.
No. 10-CB 90° Base Elbow
No. 20-CB Base Tee
BASE FITTINGS – 90° BASE ELBOW OR BASE TEE
Nom. Size 90° Base Elbow No. 10-CB Base Tee No. 20-CB
inchesWeight Each
lb
Price EachWeight Each
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 19.0 $1828.50 $1918.50 19.0 + +4 23.6 548.50 575.00 26.0 + +6 42.0 930.00 976.00 50.0 + +8 75.0 1229.00 1289.50 92.0 + +
10 114.0 1229.00 2072.00 115.0 + +12 152.0 2834.50 2976.00 181.0 + +14 295.0 4381.00 4600.00 293.0 + +16 312.0 5421.50 5765.50 338.0 + +18 451.0 6448.00 6770.00 489.0 + +20 557.0 8776.00 9215.50 632.0 + +24 875.0 12476.00 12941.50 895.0 + +30 + + + + + +36 + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
Side base fittings are available. Contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
No. 100-CB 90° Base Long Radius Elbow
No. 100-CB 90° Base Long Radius Elbow
BASE FITTINGS – 90° BASE LONG RADIUS ELBOW
Nom. Size90° Base Long Rad. Elbow
No. 100-CB
inchesWeight Each
lbPrice Each
Tnemec 37-77 Cement Lined3 25.0 + +4 40.0 $2275.50 $2494.006 76.0 3501.50 3384.508 141.0 5360.00 5641.50
10 206.0 7708.00 8478.5012 310.0 8151.50 8579.5014 340.0 8394.00 8840.5016 425.0 10451.50 11002.0018 591.0 13084.50 13772.5020 717.0 16098.50 16946.0024 1056.0 20857.00 21955.5030 + + +36 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
Side base fittings are available. Contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
VICTAULIC.COM PL2017-AWWA26
Products for AWWA Grooved End Pipe
No. 25-CB Reducing Base Tee
Reducing Base Tees
NO. 25-CBRefer to publication 23.05.
No. 25-CB
REDUCING BASE TEES
Nominal Size Wgt. Ea. Price Each
inches lbTnemec 37-77
Cement Lined
4 x 3 60.0 $2490.00 $2620.506 x 3 91.0 + +
4 90.0 2646.00 2785.008 x 4 162.0 4044.00 4256.50
6 163.0 4044.00 4256.5010 x 4 225.0 4741.50 5238.00
6 231.0 4741.50 5238.008 231.0 4741.50 5238.00
12 x 4 312.0 6174.50 6450.006 313.0 6174.50 6450.008 318.0 6174.50 6450.00
10 358.0 6174.50 6450.0014 x 6 + + +
8 + + +10 + + +12 + + +
16 x 6 + + +8 + + +
10 + + +12 + + +14 + + +
18 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +
Nominal Size Wgt. Ea. Price Each
inches lbTnemec 37-77
Cement Lined
20 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +18 + + +
24 x 6 + + +8 + + +
10 + + +12 + + +14 + + +16 + + +18 + + +20 + + +
30 x 12 + + +14 + + +16 + + +18 + + +20 + + +24 + + +
36 x 12 + + +14 + + +16 + + +18 + + +20 + + +24 + + +30 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
If domestic manufactured and/or ductile iron fittings are required, contact Victaulic for pricing and availability.
Side base fittings are available. Contact Victaulic for pricing and availability.
All fittings ductile iron unless otherwise noted.
27
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
No. 10-CF 90° Flare, No. 100-CF 90° Long Radius Flare
Flares and OutletsRefer to publication 23.05.
No. 10-CF 90° Flare
No. 100-CF 90° Long Radius Flare
FLARES – 90° FLARE OR 90° LONG RADIUS FLARE
Nominal Size 90° Flare No. 10-CF 90° Long Rad. Flare No. 100-CF
inchesWeight Each
lb
Price EachWeight Each
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 18.0 + + 23.0 + +4 35.0 + + 42.0 + +6 70.0 + + 68.0 + +8 120.0 + + 118.0 + +
10 157.0 + + 188.0 + +12 190.0 + + 275.0 + +14 235.0 + + + + +18 + + + + + +20 + + + + + +24 + + + + + +30 + + + + + +36 + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 10-CS 90° Side Outlet, No. 20-CS Tee Side Outlet
No. 10-CS 90° Side Outlet
No. 20-CS Tee Side Outlet
FLARES AND OUTLETS – 90° SIDE OUTLET OR TEE SIDE OUTLET
Nom. Size 90° Side Outlet No. 10-CS † Tee Side Outlet No. 20-CS †
inchesWeight Each
lb
Price EachWeight Each
lb
Price EachTnemec 37-77
Cement Lined
Tnemec 37-77
Cement Lined
3 13.0 + + 28.0 + +4 30.0 + + 42.0 + +6 58.0 + + 85.0 + +8 90.0 + + 114.0 + +
10 124.0 + + 219.0 + +12 170.0 + + 295.0 + +14 + + + + + +16 + + + + + +18 + + + + + +20 + + + + + +24 + + + + + +30 + + + + + +36 + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Reducing side outlet tees and reducing 90° side outlets are available. Contact Victaulic for pricing and availability.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2017-AWWA28
Products for AWWA Grooved End Pipe
No. 43-CF Straight Flare
Flares and OutletsRefer to publication 23.05.
No. 43-CF Straight Flare
STRAIGHT FLARE
Nom. Size Straight Flare - No. 43-CF
inchesWeight Each
lb
Price EachTnemec 37-77
Cement Lined
3 x 8 13.0 + +4 x 8 17.0 + +6 x 8 23.0 + +8 x 10 43.0 + +
10 x 10 58.0 + +12 x 12 90.0 + +14 x 12 160.0 + +16 x 16 + + +18 x 16 + + +20 x 18 + + +24 x 18 + + +30 x 24 + + +36 x 24 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style 926 Mechanical-T Spigot
Mechanical-T Spigot
STYLE 926
For use with AWWA C151 Size PipeRefer to publication 11.07
Nominal Size inches
Approx. Wgt. Ea.
COMPLETE MECHANICAL-T Spigot SPARE PARTS
Host Pipe x Outlet lb
Price EachO-Ring
Grade “T” U-Bolts/NutsUnlined Rubber Lined † Price Each Price per Set •
10 x 4 30.0 $742.00 $1206.00 $64.00 $74.5012 x 4 33.0 848.00 1132.00 64.00 74.5014 x 4 35.0 954.00 1418.00 64.00 74.5016 x 4 36.0 1166.00 1630.00 64.00 74.50
6 44.0 1272.00 2080.50 85.00 74.5018 x 4 37.0 1325.00 1789.00 64.00 74.50
6 46.0 1457.50 2054.00 85.00 74.5020 x 4 39.0 1537.00 2001.00 64.00 74.50
6 47.0 1696.00 2292.50 85.00 74.5024 x 4 41.0 1855.00 2319.00 64.00 74.50
6 49.0 2093.50 2690.00 85.00 74.5030 x 4 46.0 2305.50 2769.50 64.00 74.50
6 54.0 2941.50 3538.00 85.00 74.5036 x 6 58.0 3392.00 3988.50 85.00 74.50
* Set consists of one 6, 8, or 10” U-bolt, two washers and two hex nuts.
† Standard rubber lining – Z\v” thick, 40 durometer natural rubber lining. Other materials or thicknesses quoted upon request.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
29
Products for AWWA Grooved End Pipe
VICTAULIC.COM PL2017-AWWA
VICTAULIC.COM PL2017-AWWA30
Cut Grooving ToolsVG28GD
Cut Grooving ToolsNotice: When ordering a cut grooving tool, please specify standard steel or ductile iron (rigid or flexible).
VG28GD (Gear Drive) *
Includes tool set for grooving 4 – 6”/100 – 150 mm standard steel pipe, crate, operating instructions, tool bit removal kit, 10”/250 mm extension bar, depth stop adjustment tools, and one extra 2 – 3Z\x”/50 – 90 mm and 8”/200 mm standard groove steel pipe tool bits.
Capacities: 2 – 8”/50 – 200 mm steel (and other IPS) and 3 – 6”/80 – 150 mm cast and ductile pipe (Additional bits required)
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVG28GD (Gear Drive) R000281AVG 37/56 $2571.50 $21263.50
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
For tool rating capacity please reference publication 24.01.
VG28GD PARTS
Type Pipe
Type Groove
Pipe Size/ Tool Bit Marking
inches | mmPart
NumbersPurchase
Price Each
AWWA # Cast and Ductile Iron
Standard (Rigid) 3 – 6/80 – 150 CIR * RK03280G06 718.00Flexible 3 – 6/80 – 150 CIF RK03280E06 718.00
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
* Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]).NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe.
VICTAULIC.COM PL2017-AWWA32
Pipe Preparation Tools
VG824
VG824 * Includes tool set for grooving 8 – 12”/200 – 300 mm standard steel pipe, crate, operating instructions, tool bit removal kit, wrench and one extra 8 – 24”/200 – 600 mm standard groove steel pipe tool bit.
Capacities: 8 – 24”/200 – 600 mm steel (and other IPS) and 8 – 24”/200 – 600 mm cast and ductile pipe (Additional bits required)
Note: Tools bits and stops for D.I. are optional. See below.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PriceVG824 R000824AVG 82/135 $3561.50 $39596.50
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
For tool rating capacity please reference publication 24.01.
VG824 PARTS
Type PipeType
Groove Tool Bit Pipe Stop
Pipe/Size Marking inches |
mmPart
NumbersPurchase
Price Each
Pipe/Size Marking inches |
mmPart
NumbersPurchase
Price Each
AWWA # Cast and Ductile Iron
Std. (Rigid)
8/200 CIR RK08824G08 436.50 8/200 CI R524824AVG 771.0010 – 12/250
– 300 CIR RK10824G12 436.50 10 – 12/250 – 300 CI R024824AVG 771.00
14/350 CIR RK14824G14 436.50 14/350 CI R224824AVG 771.0016 – 24/400
– 600 CIR RK16824G24 436.50 16 – 24/400 – 600 CI R324824AVG 771.00
Flexible
8 – 12/200 – 300 CIF RK08824E12 436.50 8/200 CI R524824AVG 771.00
14 – 24/250 – 600 CIF RK14824E24 436.50 10 – 12/250
– 300 CI R024824AVG 771.00
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe. Center adjust-able stop (Part. No. R-025-824-AVG) available.
33
Pipe Preparation Tools
VICTAULIC.COM PL2017-AWWA
VG412
VG412 Orbital Grooving Tool
Includes riser blocks and grooving heads for cut grooving 4 – 12”/100 – 300 mm ductile iron rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra charge.
Capacities: 4 – 12”/100 – 300 mm ductile iron pipe
Note: Tools bits and stops for steel are optional. See below.
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per Month List PriceVG412 Orbital Grooving Tool R000412AVG 270/365 $3853.50 $46687.00IPS Steel kit for cutting and grooving* (recommended only for lined steel pipe) N003412034 – 776.00 7713.50
Optional flexible spacer blocks: 4 – 6” /100 – 150 mm N220412667 – – 274.50
8” /200 mm N220412668 – – 296.0010 – 12” /250 – 300 mm N220412669 – – 306.00
* NOTE: Steel grooving kit can only be rented with rental tool.
For tool rating capacity please reference publication 24.01.
VG412 PARTS
Type Pipe
Knife Style
Pipe Size Tool Bit Marking
inches | mmPart
NumbersPurchase
Price Each
AWWA Cast and Ductile Iron #
Straight 4 – 6/100 – 150 N220412680 $480.50Angled 4 – 6/100 – 150 N220412568 480.50Straight 8 – 12/200 – 300 N220412679 480.50Angled 8 – 12/200 – 300 N220412569 480.50
Solid Cut-Off Blade N275412055 148.50
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
VICTAULIC.COM PL2017-AWWA34
Pipe Preparation Tools
VG
VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are supplied with an extra tool bit and ratchet handle. 2”/50 mm and larger tools include a power yoke. Power yoke is available for C\v/20 mm and 1”/25 mm (Part. No. R0240030VG). 1Z\v/32 mm and 1Z\x”/40 mm (Part No. R0240050VG) tools at $244.50 additional.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Size VG Tool for Cast Pipe (Gray and Ductile)inches | mm Style OD Weight Part Number Price
3/80 Rigid 3.960 20.0 R00R015CVG $4430.503/80 Flexible 3.960 20.0 R00F015CVG 4430.50
4/100 Rigid 4.800 26.0 R00R019CVG 4430.504/100 Flexible 4.800 26.0 R00F019CVG 4430.506/150 Rigid 6.900 27.0 R00R027CVG 4430.506/150 Flexible 6.900 27.0 R00F027CVG 4430.508/200 Rigid 9.050 40.0 R00R036CVG 6979.008/200 Flexible 9.050 40.0 R00F036CVG 6979.00
For tool rating capacity please reference publication 24.01.
Pipe Preparation Tool AccessoriesPower Mule
Power Mule (External Power Source)
Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1”/25 mm drive connection, integral safety foot switch and reversible motor (requires 115/1/60-20 amp circuit*).
Capacities: Victaulic grooving tools as noted.
* 220V optional
Tool Model Part Number
Tool Weight/ Shipping Weight
lbRental
Per MonthTool
List PricePower Mule (External Power Source) – 110V R200700MUL 190/205 $3463.50 $21256.00
35
Pipe Preparation Tools
VICTAULIC.COM PL2017-AWWA
PT100A Go/No-Go Pipe Tape
PT100A Go/No-Go Grooved Pipe Diameter Tape
Pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes C\v – 24”/20 – 600 mm. This diameter tape contains Go/No-Go markings on one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diameter markings to 100th of an inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement.
Tool Model Part Number Purchase PricePT100A Imperial Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $79.50
Box of 6 RW75-100-KIT 432.50
NOTICE
• Tape contains Go/No-Go markings on one side for use with C\v – 24”/20 – 600 mm pipe in ANSI B36.19 and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other side.
• The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic original and Machined for Rubber Lining (MRL) (C\v – 12”/20 – 300 mm) and Advanced Groove System (AGS) (14 – 24”/350 – 600 mm) groove diameter specifications.
• Tapes are notched on the lead end to allow proper overlap within the groove for more accurate mea-surement.
• The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and 318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to 20”), copper tube sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01”/0.25 mm increments.
• The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions, always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifications pub-lications located on www.victaulic.com.
VICTAULIC.COM PL2017-AWWA36
Pipe Preparation Tools
Terms and Conditions of Tool Rental
TERMS AND CONDITIONS OF TOOL RENTAL1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the preparation
of pipe to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee.
2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1) year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)
3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon termina-tion of the lease, or applied to any open invoices on the Lessee’s account, provided Lessee is not in default under any of the term of the lease and has returned leased property in good condition, less ordinary wear and tear.
4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.
5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party, without prior written consent of the Lessor.
6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein except as expressly set forth in this Lease.
7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee’s possession and Lessee shall keep the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the lessor with a valid sales tax exemption certificate for the state where the tool is delivered.
8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.
9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until returned, and Lessor shall also have the right to remove the leased property from Lessee’s premises, without recourse to any legal proceedings.
10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement tools and/or parts, without cost, upon return of the leased property to Lessor.
11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee’s fault or not, Lessee shall pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current Victaulic price list for Pipe Preparation tools.
12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of what-soever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery, pos-session, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the termination of this Lease.
13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies: (a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the Lessee. (b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property. (c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other pro-cess of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termina-tion of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing. (d) To terminate this lease as to any or all items of leased property. (e) To pursue any other remedy at law or in equity. Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all obli-gations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee’s obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or separately.
14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property, the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addi-tion to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or rem-edies hereunder or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors, administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid, it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.
37
Pipe Preparation Tools
VICTAULIC.COM PL2017-AWWA
Terms and Conditions of Tool Sale, Tool Warranty
TERMS AND CONDITIONS OF TOOL SALEControlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
Minimum Order: $100.00 net for any single order.
Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.
Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $7.500 and over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written consent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
Weights: All weights are approximate shipping weights and subject to change without notice.
Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.
WARRANTYStandard product warranty applies. See Inside Back Cover.
NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.
VICTAULIC.COM PL2017-AWWA38
Pipe Preparation Tools
Terms and Conditions of Sale
Terms and Conditions of SaleCONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on inovice. Maximum legal interest rate charged thereafter.
MINIMUM INVOICE CHARGES: $100 net for any single order.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders having a net price value of $7500 and over, for shipment at one time to one destination into distributor stock, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $7500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or han-dling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard (i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and without incurring obligation. For further information contact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment without notice and without incurring obligation.
Warranty, Victaulic Contact Information
WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.EFFECTIVE AUGUST 4, 2008
VICTAULIC® LOCATIONS
UNITED STATES ANDWORLD HEADQUARTERS4901 Kesslersville RoadEaston, PA 18040 USA1 800 PICK VIC1 800 742 5842(within North America)1 610 559 [email protected]
victaulic.com
MEXICO BRAZILCalle Circuito del MarquesNo 8 al 11Parque Industrial El MarquesMunicipio El MarquesQueretaro, MexicoCP 8624652 442 253 [email protected]
Av. Marquês de São Vincente446 Cj 1303Várzea da Barra Funda –São Paulo-SPCEP 01139-000 – Brazil55 11 3548 [email protected]
AWWA PRICE LIST
PRODUCTS FOR GROOVED END PIPE
AWWA PRICE LIST
PRODUCTS FOR GROOVED END PIPE
PL2017-AWWAEffective April 1, 2017
PL2017-AWWA 10681 REV A UPDATED 04/2017Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. © 2017 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
victaulic.com
Top Related