1WPA60 REV D TH/SMT 02/2004Product: www.cdpoweronline.com
60 Watt Dual Output Quarter Brick DC/DC ConverterWPA60 Series
2.3” x 1.45” x 0.40” (58.42mm x 36.83mm x 10.16mm) Dual Outputs - Output 1/Output 2 Vdc: 1.5/1.0; 1.8/1.2; 2.2/1.5; 2.5/1.8; 3.3/1.2; 3.3/1.8; 3.3/2.5; 5.0/1.5; 5.0/3.3 Through Hole and SMT Models Independently Regulated Outputs 36V - 75V Input Range Industry Standard Pinouts Input & Output Filtering
Remote On/Off Function Meets Basic Insulation Requirements of EN60950 UL/CUL 60950, VDE EN60950 Approved Fixed Frequency Operation No Minimum Load Requirements Output Short Circuit Protection Self-resetting Over Voltage Protection C&D Technologies, Power Electronics Division is ISO9001:2000 Certified
Corporate: www.cdtechno.comCorporate: www.cdtechno.comProduct: www.cdpoweronline.com
The WPA60 Series are high performance DC/DC converters providing two independent regulated outputs. For maximum flexibility, power can be traded between outputs as required. The unit delivers high performance across all line and load conditions. The WPA60 Series are assembled by a fully automated process using surface mount components for increased
reliability. WPA DC-DC converter modules are certified to UL/CUL 60950, and VDE to EN60950. It is designed to meet CISPR22/EN55022/FCC15J Class B specs for EMI levels with external filtering. Other features include: Full Regulation Down to Zero Load Undervoltage Lock-Out
Auto-Start Internal Temperature Shutdown Auto-Reset Soft Start Remote On/Off (Available in Positive or Negative Logic) Short Circuit Protection Overvoltage Protection Output Voltage Adjust on Both Outputs
NOMINAL INPUT OUTPUT CURRENT TYPICAL VOLTAGE OUTPUT OUTPUT MIN MAX EFFICIENCY MODEL (VDC) #1 #2 LOAD(A) LOAD (A) (%)WPA60R48D1510* 48 1.5 1.0 0.0 12.02 82WPA60R48D1812* 48 1.8 1.2 0.0 12.0 82WPA60R48D2215* 48 2.2 1.5 0.0 12.0 86WPA60R48D2518* 48 2.5 1.8 0.0 12.0 86WPA60R48D3312* 48 3.3 1.2 0.0 12.0 89WPA60R48D3318* 48 3.3 1.8 0.0 12.0 89WPA60R48D3325* 48 3.3 2.5 0.0 12.0 89WPA60R48D0515* 48 5.0 1.5 0.0 12.0 89
WPA60R48D0533* 48 5.0 3.3 0.0 12.0 90
Input current at nominal input line = 1.45A (Output Power = 60W)*Models available with -1 option (positive logic)1Total output power not to exceed 60 Watts2When the input voltage is less than 42 VDC the maximum allowable current on each output of the WPA60R48D1510 is 6A.
PRODUCT SELECTION CHART 1
2WPA60 REV D TH/SMT 02/2004Product: www.cdpoweronline.com
SPECIFICATIONS, ALL MODELS Specifications are at TA = +25°C, Airflow = 300LFM (1.5m/s) at nominal input voltage unless otherwise specified.
INPU
T PARAMETER CONDITIONS MIN TYP MAX UNITSINPUT Voltage Range Vin = 48V, Io=I Rated 36 48 75 VDCReflected Ripple Current 675 mApk-pk
INPUT CONTROL Temperature Shutdown PCB 120 °CTemperature Hysteresis 5 °CQuiescent Standby Current Vin = 48VDC 8 10 mAUndervoltage Lockout 32.5 VUndervoltage Shutdown 2 V
GEN
ERA
L
PARAMETER CONDITIONS MIN TYP MAX UNITSISOLATIONRated Voltage 2000 VDCResistance 10 MΩCapacitance 1000 pFLeakage Current 240 VAC 90 µArms
OUTPUTRated Power 60 WVoltage Setpoint Accuracy ±1.5 %Temperature Coefficient ±0.005 %/°COutput Voltage(Over all conditions of I/P voltage V1 2 % of Nomload & temperature) V2 8 % of NomRipple & Noise (Note 1) BW = 5Hz to 20MHz 90 mVp-p Output Adjust Range Trim Up 8 % Trim Down 5 %Max Capacitive Load 10,000 µFOvervoltage Protection 15 %
GENERALSwitching Frequency 350 KHzMTTF per ML-HDBK-217 Circuit Stress Method Ground Benign TA = +25° Unmodified Database 1,000,000 HrPackage Weight 30 g
TEMPERATURE Operation/Specification PCB Temperature -40 +100 °CStorage PCBTemperature -55 +125 °CShutdown Temperature PCB Temperature +120 °C
NOTE 1: Measured at 20 MHz bandwidth across a 6µf multi layer ceramic capacitor located approximately 1” from output terminals.
SPECIFICATIONSSpecifications are at TA = +25°C, Airflow = 300LFM (1.5m/s) at nominal input voltage unless otherwise specified.
3WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
To Find Model Number Model Numbers Part NumbersWPA60R48D1510 6064965WPA60R48D1812 6064957WPA60R48D2215 6064956WPA60R48D2518 6064955WPA60R48D3312 6064953WPA60R48D3318 6064952WPA60R48D3325 6064951WPA60R48D0515 6064966WPA60R48D0533 6064954WPA60R48D1510-1 6064993WPA60R48D1812-1 6064992WPA60R48D2215-1 6064991WPA60R48D2518-1 6064990WPA60R48D3312-1 6064989WPA60R48D3318-1 6064988WPA60R48D3325-1 6064987WPA60R48D0515-1 6064994WPA60R48D0533-1 6064986
ORDERING INFORMATION (THROUGH HOLE)
WPA60R48D yz - Device Family 60 Watt, Dual Output, Quarter Brick, 48VDC Input Range Model Number Selected from Product Selection Chart (above) y = 15 = 1.5V, 18 = 1.8V, 22 = 2.2V, 25 = 2.5V, 33 = 3.3V, 05 - 5.0V, z = 10 = 1.0V, 12 = 1.2V, 15 = 1.5V, 18 - 1.8V 25 = 2.5V, 33 = 3.3V Remote On/Off Logic and Pin Configuration No Number = Positive Logic, Through Hole 1 = Negative Logic, Through Hole
.410 [10.41]MAX
.135 [3.43]
.188 [4.78]
3
2
1
4
5
6
7 .350 [8.89]
.600 [15.24]
.850 [21.59]
1.100 [27.94]
BOTTOM VIEW(PIN SIDE)
2.15
0 [ 5
4.61
]
.150
[ 3.8
1]
.000
[ 0.0
0]
.000 [0.00]
1.075 [27.31]
.725 [18.42]
1.450 ±[36.83 ±
.375 [9.52]
2.300 ±.010[58.42 ±.25]
Ø.040 [1.02] Typ
Ø.060 [1.52] Typ
Dimensions are in inches [mm]
MECHANICAL (THROUGH HOLE)
1 +Vin2 Remote On/Off3 -Vin4 +Vout25 Return6 Trim7 +Vout1
PIN FUNCTIONS
NOTES:Pin placement tolerance: +.010
Pin material: Copper
Pin Finish: Matte Tin over Nickel Converter weight: [24g]
1. Certain early production units may use Brass pins with a Tin/Lead over Nickel Finish
1
1
4WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PIN FUNCTIONS
1. +Vin2. Remote ON/OFF3. -Vin4. +Vout25. Return6. Trim7. +Vout1
WPA60
3
2
1
4
5
6
7 .350 [8.89]
.600 [15.24]
.850 [21.59]
1.100 [27.94]
BOTTOM VIEW(PIN SIDE)
2.15
0 [5
4.61
]
.150
[3.8
1]
.000
[0.0
0]
.000 [0.00]
1.075 [27.31]
.725 [18.42]
1.450 ±.010[36.83 ±.25]
.375 [9.52]
2.300 ±.010[58.42 ±.25]
Dimensions are in inches [mm]
.410 [10.41]MAX
.135 [3.43] Ø.060 [1.52] Typ
To Find Model Number Model Numbers Part NumbersWPA60R48D1510-2 WPA60R48D1510-2WPA60R48D1812-2 WPA60R48D1812-2WPA60R48D2215-2 WPA60R48D2215-2WPA60R48D2518-2 WPA60R48D2518-2WPA60R48D3312-2 WPA60R48D3312-2WPA60R48D3318-2 WPA60R48D3318-2WPA60R48D3325-2 WPA60R48D3325-2WPA60R48D0515-2 WPA60R48D0515-2WPA60R48D0533-2 WPA60R48D0533-2WPA60R48D1510-3 WPA60R48D1510-3WPA60R48D1812-3 WPA60R48D1812-3WPA60R48D2215-3 WPA60R48D2215-3WPA60R48D2518-3 WPA60R48D2518-3WPA60R48D3312-3 WPA60R48D3312-3WPA60R48D3318-3 WPA60R48D3318-3WPA60R48D3325-3 WPA60R48D3325-3WPA60R48D0515-3 WPA60R48D0515-3WPA60R48D0533-3 WPA60R48D0533-3
ORDERING INFORMATION (SMT)
WPA60R48D yz - Device Family 60 Watt, Dual Output, Quarter Brick, 48VDC Input Range Model Number Selected from Product Selection Chart (above) y = 15 = 1.5V, 18 = 1.8V, 22 = 2.2V, 25 = 2.5V,
33 = 3.3V, 05 - 5.0V, z = 10 = 1.0V, 12 = 1.2V, 15 = 1.5V, 18 - 1.8V
25 = 2.5V, 33 = 3.3V Remote On/Off Logic and Pin Configuration 2 = Positive Logic, SMT 3 = Negative Logic, SMT
MECHANICAL (SMT)PIN FUNCTIONS
1 +Vin2 Remote On/Off3 -Vin4 +Vout25 Return6 Trim7 +Vout1
NOTES:Pin placement tolerance: +.010
Pin material: Copper
Pin Finish: Matte Tin over Nickelwith Tin/Lead coating on contactsurface
Converter weight: [24g]
* Pin Co-Planarity within 0.004”
5WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
APPLICATION NOTES
Output Voltage Trim
Each of the WPA60’s output voltages may be simulta-neously adjusted above or below the nominal set point bya value as indicated on the Product Data Sheet. Asshown in Figure 1, to raise the converter output voltage aresistor must be placed between the Trim pin and Returnpin.
Figure 1 – Trim Up Circuit
WPA60Trim
Return
+ Vout1
+ Vout2
+ Vin
ON/OFF
- Vin
(Top View)
RT
RL1
RL2
To lower the converter output voltage a resistor must beplaced between the Trim pin and Vout1 pin as shown inFigure 2.
Figure 2 – Trim Down Circuit
WPA60Trim
Return
+ Vout1
+ Vout2
+ Vin
ON/OFF
- Vin
(Top View)
RT RL1
RL2
The resistance value required to achieve the desiredamount of positive/negative trim can be determined byreferring to the trim graph for each model. If trimming isnot desired then the Trim pin should be left uncon-nected.
Remote ON/OFF Function
WPA60Trim
Return
+ Vout1
+ Vout2
+ Vin
ON/OFF
- Vin
(Top View)
Control Signal
The WPA60 is equipped with a primary ON/OFF pin usedto remotely turn the converter on or off via a systemsignal. The input is TTL open-collector and/or FET open-drain compatible. For the positive logic model a systemlogic low signal will turn the unit off. For negative logicmodels a system logic high signal will turn the converteroff. For negative logic models where no control signalwill be used the ON/OFF pin should be connecteddirectly to –Vin to ensure proper operation. For positivelogic models where no control signal will be used theON/OFF pin should be left open for normal operation.
Figure 3 – Remote ON/OFF Control Circuit
Protective Functions
Operation
Temperature Shutdown
The over temperature shutdown feature of the WPA60will cause the unit to shutdown at a typical pwbtemperature of 120oC. This protective feature iscomprised of a thermistor in the unit control loop. At atemperature of 120oC this circuit will cause the PWM togo into an idle mode, resulting in no output from theconverter and preventing damage to the convertercomponents. When the temperature of the unit dropsbelow 120oC the fault condition will clear and theconverter will resume normal operation. If the cause ofthe over temperature condition is not identified andcorrected the unit will continue to cycle on and off.
6WPA60 REV D TH/SMT 02/2004Product: www.cdpoweronline.com
APPLICATION NOTES
Input Under-Voltage Shutdown
The nominal input voltage for the WPA60 is 48Vdc. At an input voltage of 32.5Vdc nominal the unit will shutdown on an input under-voltage condition. At an input voltage less than 32.5V the under-voltage sensing circuit will send a signal to the PWM causing it to go into idle mode. This will result in no output from the converter, protecting the unit from a high input current condition. When the input voltage returns to a level above 32.5V the unit will return to normal operation. The unit will typically turn on at an input voltage of 34.5V nominal as indicated on the Product Data Sheet. This is due to hysterisis designed into the protective circuit to prevent excessive cycling of the converter.
Output Short Circuit Protection
When a short circuit condition appears on the output the converter will go into hiccup mode. In hiccup mode the converter will cycle on and off repeatedly until the short circuit condition is cleared.
Safety
The WPA60 meets safety requirements per UL/CUL 60950 and VDE to EN60950. Additionally, the converter meets CISPR22/ EN55022/ FCC15J Class B specs for EMI levels with external filtering.
Performance CharacterizationThermal DeratingMaximum ouput current vs. ambient temperature at various airflow rates has been determined for each model of the WPA60. From these graphs, the combination of maximum ambient temperature and minimum airflow for select output current combinations can be determined. Each model was analyzed for maximum allowable output power over an ambient temperature range of 0 to 85oC and for airflows up to 600LFM. In each case the maximum allowable power at a given airflow and ambient temperature is defined as the point at which a known component reaches its individual temperature limit.
Efficiency
Efficiency data for each model was determined as a function of Load Current and Input Voltage. Efficiency vs. Load Current was measured at an ambient temperature of 25oC, an airflow of 300LFM with an input voltage of 48Vdc. Efficiency vs. Input Voltage was measured at an ambient temperature of 25oC, an airflow of 300LFM and rated load. Graphs for each model are provided in their respective section.
Start-Up, ON/OFF and Transient Response
For each model, waveforms are provided showing output voltage response and timing to input voltage power up/down, Remote ON/OFF state change and load current transient responses. Separate traces are provided showing the on/off timing sequence of the two outputs relative to one another. Output voltage transient responses are provided for step load changes of 50% - 100% of rated load current and 100% - 50% of rated load. Waveforms for each model are provided in their respective section.
7WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D0533 and WPA60R48D0533-1
84.00
85.00
86.00
87.00
88.00
89.00
90.00
91.00
92.00
12/0 10/3 8/6 6/9 4/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
88.0088.2088.4088.6088.8089.0089.2089.4089.6089.8090.00
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
yTrim Down GraphTrim Up Graph
Turn On Time (VIN to VOUT)
V1
V2
VIN
Efficiency vs. Input Voltage @ TA = +250C
Efficiency vs. Output Current@ TA = +250C
MODEL WPA60R48D0533
Rise Time (V1 and V2)
V1
V2
Time Scale = 500µs/divTime Scale = 50ms/div
0.000.50
1.001.50
2.002.50
3.003.50
4.004.50
5.005.50
6.006.50
7.007.50
8.00
70.75 33.95 20.05 14.00 10.55 8.15 6.45 5.20 4.20 3.40 2.80 2.25 1.75 1.40 1.02 0.77
Trim Resistance (Kohms)
Cha
nge
In V
out (
%)
5 Vout3.3 Vout
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
147.95 73.60 48.15 35.20 27.30 22.06 18.25 15.40 13.15 11.35
Trim Resistance (Kohms)
Cha
nge
In V
out (
%)
5 Vout3.3 Vout
8WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Turn Off Time (VIN to VOUT)
V1
V2
VIN
V1
V2
ON/OFF
Primary On Time (Primary Remote to VOUT)
CH1 (5.0Vdc) Transient Response50% to 100% Load Step
Time Scale = 10ms/divTime Scale = 500µs/div
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
V1
I1
CH1 (5.0Vdc) Transient Response100% to 50% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (3.3Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
I2
V2
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (3.3Vdc) Transient Response100% to 50% Load Step
PERFORMANCE CURVES: WPA60R48D0533 and WPA60R48D0533-1
9WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
142.15 71.15 47.15 34.95 27.65 22.70 19.25 16.55 14.50 12.80
Trim Resistance (Kohms)
Cha
nge
In V
out (
%)
5 Vout1.5 Vout
84.6084.8085.0085.2085.4085.6085.8086.0086.2086.4086.6086.80
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
PERFORMANCE CURVES: WPA60R48D0515 and WPA60R48D0515-1MODEL WPA60R48D0515
Turn On Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 50ms/div
Trim Up Graph Trim Down Graph
V1
V2
Time Scale = 1ms/div
Rise Time (V1 and V2)
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
76.00
78.00
80.00
82.00
84.00
86.00
88.00
90.00
92.00
12/0 11/3 10/6.6 8.4/12 6/12 3/12 012
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
0.000.501.001.502.002.503.003.504.004.505.005.506.006.507.007.508.00
25.20 11.20 6.90 4.80 3.60 2.75 2.25 1.75 1.45 1.15 0.95 0.77 0.62 0.48 0.37 0.2
Trim Resistance (Kohms)
Cha
nge
In V
out (
%)
5 Vout1.5 Vout
10WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D0515 and WPA60R48D0515-1
Turn Off Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 500µs/div
Primary On Time (Primary Remote to VOUT)
V1
V2
ON/OFF
Time Scale = 2ms/div
CH1 (5.0Vdc) Transient Response50% to 100% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH1 (5.0Vdc) Transient Response100% to 50% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.5Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.5Vdc) Transient Response100% to 50% Load Step
I2
V2
I2
V2
11WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D3325 and WPA60R48D3325-1
Trim Up Graph Trim Down Graph
Turn On Time (VIN to VOUT)
VIN
V1
V2
Time Scale = 50ms/div
V1
V2
Time Scale = 1ms/div
Rise Time (V1 and V2)
MODEL WPA60R48D3325
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
84.00
85.00
86.00
87.00
88.00
89.00
90.00
91.00
92.00
12/0 5.5/7.2 5/6.6 10/11 9/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
86.80
87.00
87.20
87.40
87.60
87.80
88.00
88.20
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
0.000.501.001.502.002.503.003.504.004.505.005.506.006.507.007.508.00
100.
30
51.0
5
31.1
0
22.3
0
16.6
0
13.0
5
10.3
0
8.20
6.70
5.50
4.45
3.65
2.90
2.30
1.75
1.30
Trim Resistance (Kohms)
Cha
nge
In V
out (
%
3.3 Vout
2.5 Vout
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
218.65 106.00 66.75 48.40 36.80 29.60 24.15 20.30 17.15 14.70
Trim Resistance (Kohms)
Cha
nge
In V
out (
%)
3.3 Vout2.5 Vout
12WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D3325 and WPA60R48D3325-1
Primary On Time (Primary Remote to VOUT)
Time Scale = 2ms/div
ON/OFF
V2
V1
Turn Off Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 500µs/div
CH1 (3.3Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I1
V1V1
I1
CH1 (3.3Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (2.5Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
CH2 (2.5Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
13WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
0.00
1.00
2.00
3.00
4.00
5.00
6.00
213.50 108.00 70.10 52.65 41.45 34.00 28.45 24.25 20.95 18.50
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
3.3V1.8V
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
95.45 41.30 24.05 16.75 12.25 9.50 7.45 6.00 4.80 4.00 3.10 2.55 1.95 1.60 1.20 0.87
Trim Resistance (Kohms)
Cha
nge
in V
out (
%
1.8V3.3V
78.00
80.00
82.00
84.00
86.00
88.00
90.00
12/0 6/11 12/11.3 11.6/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
84.20
84.40
84.60
84.80
85.00
85.20
85.40
85.60
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
PERFORMANCE CURVES: WPA60R48D3318 and WPA60R48D3318-1
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
Trim Up Graph Trim Down Graph
Turn On Time (VIN to VOUT) Rise Time (V1 and V2)
Time Scale = 100ms/div Time Scale = 1ms/div
V1
VIN
V1
V2
14WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D3318 and WPA60R48D3318-1
Turn Off Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 100µs/div
Primary On Time (Primary Remote to VOUT)
V1
V2
ON/OFF
Time Scale = 2ms/div
CH1 (3.3Vdc) Transient Response50% to 100% Load Step
V1
I1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH1 (3.3Vdc) Transient Response100% to 50% Load Step
V1
I1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.8Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.8Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2 V2
I2
15WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
201.50 107.00 73.25 54.90 42.90 35.75 29.95 25.55 22.50 19.85
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
3.3V
1.2V
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
50.85 22.80 13.45 9.35 6.95 5.35 4.15 3.35 2.65 2.20 1.75 1.40 1.15 0.87 0.64 0.45
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
3.3V1.2V
PERFORMANCE CURVES: WPA60R48D3312 and WPA60R48D3312-1
Efficiency vs. Input Voltage @ TA = +250C
Efficiency vs. Output Current@ TA = +250C
Trim Up Graph Trim Down Graph
Turn On Time (VIN to VOUT) Rise Time (V1 and V2)
Time Scale = 100ms/div Time Scale = 1ms/div
VIN
V1
V2
V1
V2
74.00
76.00
78.00
80.00
82.00
84.00
86.00
88.00
90.00
92.00
12/0 12/6 12/12 6/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
83.60
83.80
84.00
84.20
84.40
84.60
84.80
85.00
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
16WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D3312 and WPA60R48D3312-1
Turn Off Time (VIN to VOUT)
Time Scale = 100µs/div
V1
V2
VIN
Primary On Time (Primary Remote to VOUT)
V1
V2
ON/OFF
Time Scale = 2ms/div
CH1 (3.3Vdc) Transient Response50% to 100% Load Step
V1
I1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH1 (3.3Vdc) Transient Response100% to 50% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.2Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
CH2 (1.2Vdc) Transient Response100% to 50% Load Step
V2
I2
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
17WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
74.00
76.00
78.00
80.00
82.00
84.00
86.00
88.00
90.00
92.00
12/0 12/6 6/12 12/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y 36V48V75V
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
90.30 42.55 29.10 20.05 15.45 11.85 9.70 7.65 6.40 5.05
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
2.5 V1.8 V
0.001.002.003.004.005.006.007.008.009.00
10.0011.00
92.40 38.60 22.75 15.75 11.15 8.75 6.55 5.20 3.95 3.20 2.40 1.90 1.30 0.91 0.49 0.20
Trim Resistance (Kohms)
Cha
nge
in V
out (
%
2.5V1.8V
83.00
83.20
83.40
83.60
83.80
84.00
84.20
84.40
84.60
84.80
85.00
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
PERFORMANCE CURVES: WPA60R48D2518 and WPA60R48D2518-1
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
Trim Down GraphTrim Up Graph
Turn On Time (VIN to VOUT)
VIN
V1
V2
Time Scale = 100ms/div
CH2 (1.8Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
V2
I2
18WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D2518 and WPA60R48D2518-1
Turn Off Time (VIN to VOUT)
Time Scale = 500µs/div
V1
V2
VIN
Time Scale = 2ms/div
V1
V2
ON/OFF
Primary On Time (Primary Remote to VOUT)
CH1 (2.5Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
V1
I1
CH1 (2.5Vdc) Transient Response100% to 50% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.8Vdc) Transient Response50% to 100% Load Step
I2
V2
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.8Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
V2
I2
19WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
91.80 49.10 32.15 23.30 18.00 13.70 10.85 8.85 7.75 6.40
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
2.2 V1.5 V
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
104.80 44.05 25.70 17.55 12.65 9.55 7.30 5.55 4.35 3.30 2.65 1.95 1.25 0.82 0.31 0.00
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
2.2 V1.5 V
74.00
76.00
78.00
80.00
82.00
84.00
86.00
88.00
90.00
92.00
12/0 12/6 6/12 12/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
PERFORMANCE CURVES: WPA60R48D2215 and WPA60R48D2215-1
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
Trim Up Graph Trim Down Graph
Turn On Time (VIN to VOUT)
VIN
V1
V2
Time Scale = 50ms/div
Rise Time (V1 and V2)
V1
V2
Time Scale = 1ms/div
82.4082.6082.8083.0083.2083.4083.6083.8084.0084.20
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
20WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D2215 and WPA60R48D2215-1
Turn Off Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 500µs/div
Primary On Time (Primary Remote to VOUT)
V1
V2
ON/OFF
Time Scale = 2ms/div
CH1 (2.2Vdc) Transient Response50% to 100% Load Step
V1
I1
Voltage Scale = 200mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH1 (2.2Vdc) Transient Response100% to 50% Load Step
V1
I1
Voltage Scale = 200mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.5Vdc) Transient Response50% to 100% Load Step
I2
V2
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.5Vdc) Transient Response100% to 50% Load Step
V2
I2
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
21WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
53.30 26.70 17.15 12.25 9.25 7.25 5.60 4.60 3.95 3.25
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
1.8V1.2V
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
51.80 23.45 14.10 9.75 7.65 5.95 4.85 3.85 3.25 2.50 2.10 1.80 1.45 1.11 0.83 0.63
Trim Resistance (Kohms)
Cha
nge
in V
out (
%)
1.8V1.2V
82.40
82.60
82.80
83.00
83.20
83.40
83.60
83.80
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
PERFORMANCE CURVES: WPA60R48D1812 and WPA60R48D1812-1
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
Trim Up Graph Trim Down Graph
Turn On Time (VIN to VOUT)
Time Scale = 50ms/div
VIN
V1
V2
Rise Time (V1 and V2)
V1
V2
Time Scale = 1ms/div
74.00
76.00
78.00
80.00
82.00
84.00
86.00
88.00
90.00
92.00
12/0 12/6 6/12 12/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
22WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D1812 and WPA60R48D1812-1
Turn Off Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 500µs/div
Primary On Time (Primary Remote to VOUT)
ON/OFF
V2
V1
Time Scale = 5ms/div
CH1 (1.8Vdc) Transient Response50% to 100% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH1 (1.8Vdc) Transient Response100% to 50% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.2Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 20mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
CH2 (1.2Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 20mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
23WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
0.000.501.001.502.002.503.003.504.004.505.005.506.006.507.007.508.008.509.009.50
10.0010.5011.00
10.68 5.07 2.97 2.20 1.56 1.27 0.98 0.81 0.65 0.55 0.43 0.35 0.27 0.22 0.16 0.13
Trim Resistance (Kohms)
Cha
nge
In V
out (
%)
1.5 Vout1.0 Vout
83.00
83.20
83.40
83.60
83.80
84.00
84.20
84.40
84.60
84.80
36 39 42 45 48 51 54 57 60 63 66 69 72 75
Vin (Vdc)
Effic
ienc
y
76.00
78.00
80.00
82.00
84.00
86.00
88.00
12/3 12/6 12/0 12/9 9/12 12/12 6/12 3/12 0/12
Load (V1/V2 Amps)
Effic
ienc
y
36V48V75V
PERFORMANCE CURVES: WPA60R48D1510 and WPA60R48D1510-1
Trim Up Graph Trim Down Graph
Turn On Time (VIN to VOUT)
VIN
V1
V2
Time Scale = 50ms/div
V1
V2
Time Scale = 1ms/div
Rise Time (V1 and V2)
Efficiency vs. Output Current@ TA = +250C
Efficiency vs. Input Voltage @ TA = +250C
0.000.501.001.502.002.503.003.504.004.505.005.506.006.507.007.508.00
27.05 11.45 7.55 5.40 4.25 3.35 2.80 2.35 2.00 1.70
Trim Resistance (Kohms)
Cha
nge
In V
out
(%)
1.5 Vout
1.0 Vout
24WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
PERFORMANCE CURVES: WPA60R48D1510 and WPA60R48D1510-1
Turn Off Time (VIN to VOUT)
V1
V2
VIN
Time Scale = 500µs/div
Primary On Time (Primary Remote to VOUT)
V1
V2
ON/OFF
Time Scale = 2ms/div
CH1 (1.5Vdc) Transient Response50% to 100% Load Step
I1
V1
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I1
V1
CH1 (1.5Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 100mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
CH2 (1.0Vdc) Transient Response50% to 100% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
CH2 (1.0Vdc) Transient Response100% to 50% Load Step
Voltage Scale = 50mV/div; Time Scale = 100µs/divdi/dt = 0.2A/µs
I2
V2
25WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Tot
al O
utpu
t Pow
er (P
erce
nt o
f Rat
ed)
0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D0533)
Thermal Derating (WPA60R48D0515)Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Ambient Temperature (Deg C)
Tot
al O
utpu
t Pow
er (P
erce
nt o
f Rat
ed)
0 LFM
60 LFM
100 LFM
200 LFM
300 LFM
400 LFM
500 LFM
600 LFM
26WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Temperature (Deg C)
Tot
al O
utpu
t Pow
er (%
of R
ated
)
0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
Thermal Derating (WPA60R48D3325)
THERMAL DERATING CURVES
27WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Temperature (Deg C)
Tota
l Out
put P
ower
(% o
f Rat
ed)
0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D3318)
28WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Temperature (Deg C)
Tot
al O
utpu
t Pow
er (%
of R
ated
)
0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D3312)
29WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Ambient Temperature (Deg C)
Tot
al O
utpu
t Pow
er (%
of R
ated
) 0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D2518)
30WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Ambient Temperature (Deg C)
Tot
al O
utpu
t Pow
er (%
of R
ated
)
0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D2215)
31WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D1812)
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Ambient Temperature (Deg C)
Tot
al O
utpu
t Pow
er (%
of R
ated
) 0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
32WPA60 REV D TH/SMT 2/2004Product: www.cdpoweronline.com
Output Current v/s Temperature Vin = 48Vdc
0.00
10.00
20.00
30.00
40.00
50.00
60.00
70.00
80.00
90.00
100.00
5 15 25 35 45 55 65 75 85
Ambient Temperature (Deg C)
Tot
al O
utpu
t Pow
er (%
of R
ated
) 0 LFM60 LFM100 LFM200 LFM300 LFM400 LFM500 LFM600 LFM
THERMAL DERATING CURVES
Thermal Derating (WPA60R48D1510)
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed tobe accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy orcompleteness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. herebydisclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arisingfrom any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purposeand in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospaceapplications.
Power Electronics Division, Americas3400 E Britannia Drive, Tucson, Arizona 85706
Tel: 800.547.2537 Fax: 520.295.4197
C&D Technologies, EMEA/Asia/PacificMilton Keynes MK14 5BU UK
Tel: +44 (0)1908 615232Fax: +44 (0)1908 617545
Top Related