© Fort Worth Fabric Studio 2015 All Rights Reserved

Supplies:

For main print - 17” x 17” For pocket - 23” x 17”For accent - 2.5” x 17” stripFor backing - 2 - 17” x 12.5” 17” x 11.5” piece of batting16” Pillow FormCoordinating Thread

Fold your pocket piece in half, so that it measures 17” x 11.5” and place a piece of batting in between the layers. Take your accent strip, and iron the left and right sides in, and then fold over and iron again.

Pocket Pillows

Fort Worth Fabric Studio

Designed by: Lindsey Weight

Pocket 23” x 17”

Main Front17” x 17”

Acce

nt S

trip

2.5

” x 1

7”

Backing 17” x 12”Backing 17” x 12”

© Fort Worth Fabric Studio 2015 All Rights Reserved

Place your accent strip and sandwich it over your pocket piece, and pin into place. Sew a top stitch along the bottom edge of your accent piece.

Place your pocket piece on the top of your main piece. Your main piece is right side up, and you will align the bottom edges and the sides. Pin into place and then sew a stay stitch along the left and right sides 1/4” in from the edge.

Take your two backing pieces and double fold over one of your long sides 1/4” and hem. Do this to both of your back pieces.

Now place your main front piece with attached pocket right side up, and then place one of your backing pieces right side down, aligning the edges - making sure the hemmed edge is towards the middle. Now place your other backing piece on top of your other pieces so that it is right side down. Pin all the layers into place and then sew a 1/2” seam along the outside edge. Once you are done, clip the corners and turn right side out and press.