Download - Pipe Hangers - R H Keleher Company

Pipe Hangers

Pipe hangers presented in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the pipingsystem.Materials: Carbon Steel, Malleable Iron, 304 and 316 Stainless Steel are used in themanufacturing of riser and pipe clamps. Other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-PlatedZinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Copper Plated, StainlessSteel and other special coatings are also available.Notes: Products in this section are designed and manufactured in accordance withindustry standards. RHK is not responsible for injuries and damage which could re-sult from improper and negligent installation of the items.

131

Standard Clevis Hanger - K3100

Part NumberNominalPipe Size

Rod Size"A" "B" "C"

Rod TakeOut "D" "E"

Adjustment"F"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3100 - 1/2 1/2" 3/8" - 16 2 1/8" 1 11/16" 15/16" 2 1/2" 7/16" 730 25

K3100 - 3/4 3/4" 3/8" - 16 2 7/16" 1 7/8" 1 1/8" 2 1/2" 1/2" 730 29

K3100 - 1 1" 3/8" - 16 2 13/16" 2 1/8" 1 3/8" 2 1/2" 5/8" 730 35

K3100 - 1 1/4 1 1/4" 3/8" - 16 3 7/16" 2 9/16" 1 13/16" 2 1/2" 7/8" 730 40

K3100 - 1 1/2 1 1/2" 3/8" - 16 4" 3" 2 1/4" 2 1/2" 1 3/16" 730 42

K3100 - 2 2" 3/8" - 16 4 1/2" 3 1/4" 2 1/2" 2 1/2" 1 5/8" 730 52

K3100 - 2 1/2 2 1/2" 1/2" - 13 5 9/16" 4" 3 1/16" 2 1/2" 2" 1350 90

K3100 - 3 3" 1/2" - 13 6 3/4" 4 7/8" 3 15/16" 2 1/2" 2" 1350 110

K3100 - 3 1/2 3 1/2" 1/2" - 13 7" 5" 4 1/16" 2 1/2" 2" 1350 142

K3100 - 4 4" 5/8" - 11 7 13/16" 5 1/2" 4 3/8" 2 1/2" 2" 1430 132

K3100 - 5 5" 5/8" - 11 9 1/16" 6 1/8" 5" 2 1/2" 2" 1430 215

K3100 - 6 6" 3/4" - 10 10 7/16" 6 15/16" 5 11/16" 3" 2" 1940 320

K3100 - 8 8" 3/4" - 10 12 3/4" 8 3/8" 7 1/8" 3 1/2" 2 5/16" 2000 485

K3100 - 10 10" 7/8" - 9 15 1/4" 9 13/16" 8 3/8" 3 1/2" 2 5/16" 3600 846

K3100 - 12 12" 7/8" - 9 17 5/8" 11 3/16" 9 11/16" 3 1/2" 2 5/8" 3800 1083

K3100 - 14 14" 1" - 8 19 9/16" 12 1/2" 10 5/8" 4" 2 7/8" 4200 1432

K3100 - 16 16" 1" - 8 21 7/16" 13 5/16" 11 9/16" 4" 2 11/16" 4600 2200

K3100 - 18 18" 1" - 8 25" 15 7/8" 14 3/16" 4 1/2" 3 15/16" 4800 2500

K3100 - 20 20" 1 1/4" - 7 27 1/2" 17 3/8" 16 5/8" 5" 5 3/8" 4800 4400

K3100 - 24 24" 1 1/4" - 7 31 3/4" 19 5/8" 18 5/8" 5" 5 3/8" 4800 5000

K3100 - 30 30" 1 1/4" - 7 38 7/8" 23 3/4" 22 3/4" 5" 6 1/4" 6000 6600

K3100 - 36 36" 1 1/4" - 7 46" 27 13/16" 25" 5" 5 7/16" 6000 8474

Material: SteelStandard Finish: Plain, Electro-Plated, Hot-Dip Galvanized orStainless SteelService: Designed for suspendingnon-insulated stationary pipe al-lowing for vertical adjustmentOrdering: Specify part number andfinish

Notes: When using oversized clevis hangers, install K3100PS (Pipe Sleeve) over cross boltto prevent deformation of clevis bottom. When attaching seismic bracing to clevis hang-ers, a K3100PS (Pipe Sleeve) must be installed over the cross bolt

K3100PVC - Plastic Coated

132

Clevis Hanger Copper - K3100CU

Part NumberNominal

Tubing SizeRod Size

"A" "B" "C"Rod Take-Out "D" "E"

Adjustment"F"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3100CU - 1/2 1/2" 3/8" - 16 2 1/4" 1 15/16" 1 1/8" 2 1/2" 3/8" 150 12

K3100CU - 3/4 3/4" 3/8" - 16 1 15/16" 1 1/2" 1 1/8" 2 1/2" 7/16" 250 12

K3100CU - 1 1" 3/8" - 16 2 5/16" 1 3/4" 1 5/16" 2 1/2" 9/16" 250 22

K3100CU - 1 1/4 1 1/4" 3/8" - 16 2 3/4" 2 1/16" 1 9/16" 2 1/2" 9/16" 250 24

K3100CU - 1 1/2 1 1/2" 3/8" - 16 3 5/16" 2 7/16" 2 1/16" 2 1/2" 15/16" 250 30

K3100CU - 2 2" 3/8" - 16 4 1/2" 3 7/16" 3 3/8" 2 1/2" 1 3/4" 250 35

K3100CU - 2 1/2 2 1/2" 1/2" - 13 5 11/16" 4 1/2" 3 15/16" 2 1/2" 2 1/8" 350 80

K3100CU - 3 3" 1/2" - 13 5 3/16" 3 5/8" 4" 2 1/2" 2 1/16" 350 88

K3100CU - 3 1/2 3 1/2" 1/2" - 13 6 1/2" 4 9/16" 4 1/8" 2 1/2" 2 1/8" 350 94

K3100CU - 4 4" 1/2" - 13 7 3/8" 3 5/16" 4 3/8" 2 1/2" 2 1/8" 400 116

K3100CU - 5 5" 1/2" - 13 9" 6 7/16" 5 3/4" 2 1/2" 2 1/2" 550 208

K3100CU - 6 6" 5/8" - 11 10 5/16" 7 1/4" 6 1/2" 2 1/2" 3" 550 247

Material: SteelStandard Finish: CopperService: Designed for suspending cop-per tubing allowing for vertical adjust-ment. (Available with plastic coasting toprovide additional separation betweentubing and hanger)Ordering: Specify part number and fin-ish

K3100CUPVC - Plastic Coated

133

Clevis Hanger for AWWA Ductile Iron Pipe - K3102

PartNumber

NominalPipe Size

Rod Size"A" "B" "C"

Rod Take-Out"D" "E"

Adjustment"F"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3102 - 4 4" 5/8" - 11 8 5/16" 5 13/16" 4 5/8" 2 1/2" 2" 1430 203

K3102 - 6 6" 3/4" - 10 10 5/8" 7 1/16" 5 13/16" 3" 2" 1940 352

K3102 - 8 8" 3/4" - 10 13 1/4" 8 5/8" 7 3/16" 3 1/2" 2 1/8" 2000 532

K3102 - 10 10" 7/8" - 9 15 7/8" 10 1/4" 8 11/16" 3 1/2" 2 1/4" 3600 800

K3102 - 12 12" 7/8" - 9 18" 11 5/16" 9 3/4" 3 1/2" 2 1/4" 3800 1152

K3102 - 14 14" 1" - 8 20 3/8" 12 5/8" 11 3/16 4" 2 7/8" 4200 1449

K3102 - 16 16" 1" - 8 23 1/2" 14 11/16" 12 7/8" 4" 3 3/8" 4600 2100

K3102 - 18 18" 1" - 8 25 5/8" 15 3/4" 13 15/16" 4 1/2" 3 3/8" 4800 2294

K3102 - 20 20" 1 1/4" - 7 29 1/2" 18 9/16" 17 7/16" 5" 4 13/16" 4800 3887

K3102 - 24 24" 1 1/4" - 7 33" 19 1/8" 20" 5" 5 1/4" 4800 4844

Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-Plated

Service: Designed for suspending stationary duc-tile iron and cast iron pipe allowing for verticaladjustmentOrdering: Specify part number and finish

Note: For pipe sizes 12” and larger, cross bolt sleeve is included

134

V Bottom Clevis Hanger - K3106

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending flexibleplastic pipe. Use with K3106V Plastic PipeSupport ChannelOrdering: Specify part number and finish

Part Number Nominal Pipe SizeRod Size

"A" "B" "C" "E"Design

Load (Lbs.)Wt./C(Lbs.)

K3106 - 1

1/2"

3/8" - 16 5 7/8"

5 3/16"

2 9/16" 150 30

3/4" 5"

1" 4 7/8"

1 1/4" 4 5/8"

1 1/2" 4 7/16"

2" 4 1/8"

K3106 - 2

2 1/2"

1/2" - 13 8 15/16"

6 13/16"

4 11/16" 250 963" 6 3/8"

4" 5 11/16"

135

Pipe Support Channel - K3106V

Material: SteelStandard Finish: Pre-GalvanizedService: Designed as a continuous support forplastic or other flexible pipe systems. Use withK3106 V Bottom Clevis Hanger. Hangers shouldbe located as close as possible to the channeljointsOrdering: Specify part number and finish

Part Number For Nominal Pipe Size "B" Design Load (Lbs.) Wt./C (Lbs.)

K3106V - 1 1/2" to 2" 1 1/2" 150 540

K3106V - 2 2 1/2" to 4" 3" 250 1080

136

Extended Clevis Hanger - K3108


Rod Size"A" "B" "C"

Rod TakeOut "D" "E"

Adjustment"F" "H"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3108 - 3/4 3/4" 3/8" - 16 4 3/8" 3 13/16" 3 1/16" 2 1/2" 1/2" 2" 730 45

K3108 - 1 1" 3/8" - 16 4 3/4" 4 1/16" 3 1/4" 2 1/2" 5/8" 2" 730 49

K3108 - 1 1/4 1 1/4" 3/8" - 16 5 3/8" 4 1/2" 3 5/16" 2 1/2" 7/8" 2" 730 55

K3108 - 1 1/2 1 1/2" 3/8" - 16 6 7/8" 5 15/16" 5 1/8" 2 1/2" 1 3/16" 2" 730 67

K3108 - 2 2" 3/8" - 16 8 13/16" 7 5/8" 6 7/8" 2 1/2" 1 5/8" 4" 730 83

K3108 - 2 1/2 2 1/2" 1/2" - 13 10" 8 1/2" 7 9/16" 2 1/2" 2" 4" 1350 177

K3108 - 3 3" 1/2" - 13 10 5/8" 8 13/16" 7 7/8" 2 1/2" 2" 4" 1350 191

K3108 - 4 4" 5/8" - 11 11 13/16" 9 1/2" 8 3/8" 2 1/2" 2" 4" 1430 237

K3108 - 5 5" 5/8" - 11 13 1/8" 10 5/16" 9 1/8" 2 1/2" 2" 4" 1430 302

K3108 - 6 6" 3/4" - 10 14 3/8" 11" 9 11/16" 3" 2" 4" 1940 397

K3108 - 8 8" 3/4" - 10 16 3/4" 12 3/8" 11 1/8" 3 1/2" 2 5/16" 4" 2000 582

K3108 - 10 10" 7/8" - 9 19 1/4" 13 13/16" 12 5/16" 3 1/2" 2 5/16" 4" 3600 968

K3108 - 12 12" 7/8" - 9 21 5/8" 15 3/16" 13 5/8" 3 1/2" 2 5/8" 4" 3800 1221

Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending insulatedpipe allowing for vertical adjustmentOrdering: Specify part number and finish.For Service temperature of 750°F thru1050°F specify Stainless Steel

Note: Hangers are sized to nominal pipe size - allowance must be made forinsulation thickness

137

Flat Top Clevis Hanger - K3109


Rod Size"A" "B" "C"

Rod Take-Out"D"

Design Load(Lbs.)

Wt./C(Lbs.)

K3109 - 2 2" 3/8" - 16 3 13/16" 2 5/8" 1 7/8" 300 52

K3109 - 2 1/2 2 1/2" 1/2" - 13 4 5/8" 3 3/16" 2 3/16" 500 116

K3109 - 3 3" 1/2" - 13 5 5/16" 3 9/16" 2 5/8" 500 133

K3109 - 3 1/2 3 1/2" 1/2" - 13 5 13/16" 3 13/16" 2 7/8" 500 145

K3109 - 4 4" 5/8" - 11 6 1/2" 4 1/4" 3 1/8" 700 180

K3109 - 5 5" 5/8" - 11 7 13/16" 5" 3 7/8" 700 248

K3109 - 6 6" 3/4" - 10 9 7/16" 5 11/16" 4 7/16" 900 332

K3109 - 8 8" 3/4" - 10 11 3/8" 7" 5 13/16" 1000 513

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated, stationary pipe where spaceis limitedOrdering: Specify part number and size

138

Adjustable Swivel Ring - K3170

Part NumberNominal Pipe

Size Rod Size "A" "B" "C" "D"Design Load

(Lbs.)Wt./C(Lbs.)

K3170 - 1/2 1/2" 3/8" - 16 2 7/16" 1 3/16" 1 1/4" 180 11

K3170 - 3/4 3/4" 3/8" - 16 2 1/2" 1 1/4" 1 1/4" 180 12

K3170 - 1 1" 3/8" - 16 2 5/8" 1 3/8" 1 1/4" 180 13

K3170 - 1 1/4 1 1/4" 3/8" - 16 2 7/8" 1 5/8" 1 1/4" 180 14

K3170 - 1 1/2 1 1/2" 3/8" - 16 3" 1 3/4" 1 1/4" 180 14

K3170 - 2 2" 3/8" - 16 3 7/16" 2 3/16" 1 1/2" 180 16

K3170 - 2 1/2 2 1/2" 3/8" - 16 3 7/8" 2 5/8" 1 11/16" 200 25

K3170 - 3 3" 3/8" - 16 4 1/4" 3" 1 3/4" 250 29

K3170 - 3 1/2 3 1/2" 3/8" - 16 4 5/8" 3 3/8" 1 7/8" 300 33

K3170 - 4 4" 3/8" - 16 5" 3 3/4" 2" 360 40

K3170 - 5 5" 1/2" - 13 5 9/16" 4 1/16" 1 3/4" 480 83

K3170 - 6 6" 1/2" - 13 6 7/16" 4 15/16" 2 3/16" 630 91

K3170 - 8 8" 1/2" - 13 7 11/16" 6 3/16" 2 7/16" 970 130

Material: SteelStandard Finish: Pre-GalvanizedService: Designed for suspending insu-lated pipe (with shield) or non-insulatedpipe allowing for vertical adjustmentOrdering: Specify part number and finish

Notes: Knurled nut available as K3170KN-(rod size). Specify theK3170 part number it will be used in when ordering

139

Adjustable Swivel Ring Copper - K3170CU

Part NumberNominal

Tubing Size Rod Size "A" "B" "C" "D"Design Load

(Lbs.) Wt./C (Lbs.)

K3170CT - 1/2 1/2" 3/8" - 16 2 1/16" 1 1/8" 31/32" 180 8

K3170CT - 3/4 3/4" 3/8" - 16 2 5/16" 1 5/16" 1 1/32" 180 10

K3170CT - 1 1" 3/8" - 16 2 1/2" 1 9/16" 1 5/32" 180 10

K3170CT - 1 1/4 1 1/4" 3/8" - 16 2 1/2" 1 9/16" 1" 180 12

K3170CT - 1 1/2 1 1/2" 3/8" - 16 2 15/16" 2" 1 5/16" 180 12

K3170CT - 2 2" 3/8" - 16 3 1/8" 2 1/8" 1 3/16" 180 12

K3170CT - 2 1/2 2 1/2" 1/2" - 13 4 1/16" 2 9/16" 1 3/8" 200 31

K3170CT - 3 3" 1/2" - 13 3 15/16" 3 3/4" 1 1/4" 250 33

K3170CT - 3 1/2 3 1/2" 1/2" - 13 4 7/16" 3 1/4" 1 1/2" 300 38

K3170CT - 4 4" 1/2" - 13 4 11/16" 3 9/16" 1 9/16" 360 40

K3170CT - 5 5" 1/2" - 13 5 15/16" 4 5/16" 1 25/32" 480 95

K3170CT - 6 6" 1/2" - 13 6 11/16" 5 3/16" 2 1/8" 630 118

Material: SteelStandard Finish: CopperService: Designed for suspending copper tubing, allowing for vertical adjustment (availablewith plastic coasting to provide additional separation between tubing and hanger)Ordering: Specify part number, rod size and finish


140

Adjustable Band Hanger - K3172


Rod Size"A" "B" "C" "D" "E" "F"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3172 - 1/2 1/2" 3/8" - 16 2 5/8" 2 3/16" 1 7/16" 1 1/4" 2 1/2" 610 11

K3172 - 3/4 3/4" 3/8" - 16 2 5/8" 2 1/16" 1 5/16" 1" 2 1/2" 610 12

K3172 - 1 1" 3/8" - 16 2 11/16" 2 1/16" 1 5/16" 11/16" 2 1/2" 610 12

K3172 - 1 1/4 1 1/4" 3/8" - 16 3 7/16" 2 9/16" 1 13/16" 1 1/4" 2 1/2" 610 14

K3172 - 1 1/2 1 1/2" 3/8" - 16 3 11/16" 2 3/4" 2" 1 3/16" 2 1/2" 610 16

K3172 - 2 2" 3/8" - 16 4 3/16" 3" 2 1/4" 1 3/16" 2 1/2" 610 23

K3172 - 2 1/2 2 1/2" 1/2" - 13 4 7/8" 3 7/16" 2 7/16" 1 1/4" 3 1/2" 970 28

K3172 - 3 3" 1/2" - 13 6" 4 1/4" 3 1/4" 1 5/8" 3 1/2" 970 41

K3172 - 3 1/2 3 1/2" 1/2" - 13 6 1/8" 4 1/8" 3 1/8" 1 3/8" 3 1/2" 970 44

K3172 - 4 4" 1/2" - 13 6 3/4" 4 1/2" 3 1/4" 1 3/8" 3 1/2" 1250 81

K3172 - 5 5" 1/2" - 13 7 3/4" 5" 4 3/4" 1 1/4" 4" 1250 100

K3172 - 6 6" 3/4" - 10 10" 6 11/16" 5 3/16" 2 1/8" 4 1/2" 1600 160

K3172 - 8 8" 3/4" - 10 11 7/8" 7 9/16" 6 13/16" 2" 4 1/2" 1800 260

Material: Steel (Stainless Steel available)Standard Finish: Plain or Pre-GalvanizedService: Designed for suspending non-insulatedpipe allowing for vertical adjustment.Ordering: Specify part number and finish


Note: Available with plastic coating as K3172PVC-size

141

Adjustable Band Hanger Copper - K3172CU

Material: SteelStandard Finish: CopperService: Designed for suspend-ing copper tubing allowing forvertical adjustment. (Availablewith plastic coating to provideadditional separation betweentubing and hanger)Ordering: Specify part numberand finish


Part Number

NominalTubing

SizeRod Size

"A" "B" "C" "D" "E" "F"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3172CU - 1/2 1/2" 3/8" - 16 9/16" 2 1/4" 1 1/2" 1 7/16" 2 1/2" 610 12

K3172CU - 3/4 3/4" 3/8" - 16 2 9/16" 2 1/8" 1 3/8" 1 3/16" 2 1/2" 610 12

K3172CU - 1 1" 3/8" - 16 2 9/16" 2" 1 1/4" 15/16" 2 1/2" 610 12

K3172CU - 1 1/4 1 1/4" 3/8" - 16 2 3/4" 2 1/16" 1 5/16" 7/8" 2 1/2" 610 12

K3172CU - 1 1/2 1 1/2" 3/8" - 16 3 1/8" 2 5/16" 1 9/16" 1" 2 1/2" 610 13

K3172CU - 2 2" 3/8" - 16 3 11/16" 2 5/8" 1 7/8" 1 1/16" 2 1/2" 610 16

K3172CU - 2 1/2 2 1/2" 1/2" - 13 4 1/2" 3 3/16" 2 5/16" 1 1/4" 2 1/2" 970 30

K3172CU - 3 3" 1/2" - 13 5" 3 7/16" 2 1/2" 1 3/16" 2 1/2" 970 32

K3172CU - 3 1/2 3 1/2" 1/2" - 13 5 3/4" 3 15/16" 3" 1 7/16" 2 1/2" 970 40

K3172CU - 4 4" 1/2" - 13 6 1/4" 4 3/16" 3 1/4" 1 7/16" 2 1/2" 970 49

142

Offset J-Hook - K3190

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for supporting light pipe runswith a 1” offset from mounting surfacesOrdering: Specify part number and finish

Part Number Nominal Pipe Size "A" "B" Design Load (Lbs.) Wt./C (Lbs.)

K3190 - 1/2 1/2" 1 15/32" 6 25/32" 200 56

K3190 - 3/4 3/4" 1 9/16" 6 7/8" 200 59

K3190 - 1 1" 1 11/16" 7 1/16" 200 81

K3190 - 1 1/4 1 1/4" 1 7/8" 7 1/4" 200 86

K3190 - 1 1/2 1 1/2" 1 31/32" 7 11/32" 200 89

K3190 - 2 2" 2 7/32" 7 19/32" 200 96

K3190 - 2 1/2 2 1/2" 2 15/32" 7 27/32" 350 125

K3190 - 3 3" 2 25/32" 8 5/32" 350 134

K3190 - 4 4" 3 9/32" 8 25/32" 450 226

143

Straight J-Hook - K3191

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for supporting light piperuns which require no clearance betweenmounting surfacesOrdering: Specify part number, size and finish

Part Number Nominal Pipe Size "A" "B" Design Load (Lbs.) Wt./C (Lbs.)

K3191 - 1/2 1/2" 21/32" 6 25/32" 200 54

K3191 - 3/4 3/4" 3/4" 6 7/8" 200 56

K3191 - 1 1" 15/16" 7 1/16" 200 78

K3191 - 1 1/4 1 1/4" 1 1/8" 7 1/4" 200 84

K3191 - 1 1/2 1 1/2" 1 7/32" 7 11/32" 200 86

K3191 - 2 2" 1 15/32" 7 19/32" 200 93

K3191 - 2 1/2 2 1/2" 1 23/32" 7 27/32" 350 120

K3191 - 3 3" 2 1/32" 8 3/8" 350 134

K3191 - 4 4" 2 21/32" 8 25/32" 450 223

144

Hinged Extension Split Pipe Clamp- K3198H

Part NumberNominalPipe Size Rod Size "A" "C" Design Load (Lbs.) Wt./C (Lbs.)

K3198H - 3/8 3/8" 3/8" - 16 31/32" 180 9

K3198H - 1/2 1/2" 3/8" - 16 1 1/16" 180 12

K3198H - 3/4 3/4" 3/8" - 16 1 7/32" 180 12

K3198H - 1 1" 3/8" - 16 1 11/32" 180 13

K3198H - 1 1/4 1 1/4" 3/8" - 16 1 19/32" 180 18

K3198H - 1 1/2 1 1/2" 3/8" - 16 1 23/32" 180 21

K3198H - 2 2" 3/8" - 16 2" 180 44

K3198H - 2 1/2 2 1/2" 1/2" - 13 2 11/32" 300 73

K3198H - 3 3" 1/2" - 13 2 23/32" 300 95

Material: Malleable IronStandard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated pipe horizontally or verticallyOrdering: Specify part number and finish

145

Part Number Nominal Tubing Size Rod Size "A" "C"Design Load

(Lbs.) Wt./C (Lbs.)

K3198HCT - 1/2 1/2" 3/8" - 16 5/8" 180 8

K3198HCT - 3/4 3/4" 3/8" - 16 13/16" 180 10

K3198HCT - 1 1" 3/8" - 16 15/16" 180 10

K3198HCT - 1 1/4 1 1/4" 3/8" - 16 1 1/8" 180 14

K3198HCT - 1 1/2 1 1/2" 3/8" - 16 1 9/16" 180 18

K3198HCT - 2 2" 3/8" - 16 1 7/8" 180 23

Hinged Extension Split Pipe Clamp - K3198HCU

Material: Malleable IronStandard Finish: CopperService: Designed for suspending copper tubing horizontally or verticallyOrdering: Specify part number and finish

146

2 Screw Extension Split Pipe Clamp - K3198


Size Thread Size "A" Rod "C"Design Load

(Lbs.) Wt./C (Lbs.)

K3198R - 3/8 3/8" 3/8" - 16 31/32" 180 12

K3198R - 1/2 1/2" 3/8" - 16 1 1/16" 180 16

K3198R - 3/4 3/4" 3/8" - 16 1 7/32" 180 18

K3198R - 1 1" 3/8" - 16 1 11/32" 180 24

K3198R - 1 1/4 1 1/4" 3/8" - 16 1 19/32" 180 29

K3198R - 1 1/2 1 1/2" 3/8" - 16 1 23/32" 180 32

K3198R - 2 2" 3/8" - 16 2" 180 39

K3198R - 2 1/2 2 1/2" 1/2" - 13 2 11/32" 300 115

K3198R - 3 3" 1/2" - 13 2 23/32" 300 140

K3198R - 4 4" 1/2" - 13 3 11/32" 300 160

Material: Malleable Iron (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated pipe horizontallyOrdering: Specify part number and finish.

147

2 Screw Extension Split Pipe Clamp - K3198CU

Part Number Nominal Tubing Size Rod Size "A" "C" Design Load (Lbs.) Wt./C (Lbs.)

K3198RCT - 3/8 3/8" 3/8" - 16 11/16" 180 12

K3198RCT - 1/2 1/2" 3/8" - 16 1 11/16" 180 12

K3198RCT - 3/4 3/4" 3/8" - 16 7/8" 180 14

K3198RCT - 1 1" 3/8" - 16 1 1/16" 180 17

K3198RCT - 1 1/4 1 1/4" 3/8" - 16 1 1/8" 180 17

K3198RCT - 1 1/2 1 1/2" 3/8" - 16 1 5/16" 180 22

K3198RCT - 2 2" 3/8" - 16 1 1/2" 180 26

Material: Malleable IronStandard Finish: CopperService: Designed for suspending copper tubing horizontallyOrdering: Specify part number and finish

148


Rod Size"A" "B" "C"

Rod TakeOut "D"

Diameter"E" Bolt Size

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3690 - 1/2 1/2" 3/8" - 16 2 3/32" 1" 1 11/16" 13/32" 1/4" - 20 x 2" 400 20

K3690 - 3/4 3/4" 3/8" - 16 2 11/32" 1" 1 13/16" 13/32" 1/4" - 20 x 2 1/4" 400 23

K3690 - 1 1" 3/8" - 16 2 19/32" 1" 1 15/16" 13/32" 1/4" - 20 x 2 1/2" 400 24

K3690 - 1 1/4 1 1/4" 3/8" - 16 2 13/16" 1" 2" 13/32" 1/4" - 20 x 2 3/4" 400 27

K3690 - 1 1/2 1 1/2" 3/8" - 16 3 1/16" 1" 2 1/8" 13/32" 1/4" - 20 x 3" 400 29

K3690 - 2 2" 3/8" - 16 3 1/2" 1" 2 5/16" 13/32" 1/4" - 20 x 3 1/2" 400 32

K3690 - 2 1/2 2 1/2" 1/2" - 13 4 7/16" 1" 3" 9/16" 3/8" - 16 x 4 1/2" 800 71

K3690 - 3 3" 1/2" - 13 4 7/8" 1" 3 1/8" 9/16" 3/8" - 16 x 5" 800 77

K3690 - 3 1/2 3 1/2" 1/2" - 13 5 3/16" 1" 3 3/16" 9/16" 3/8" - 16 x 5 1/2" 800 84

K3690 - 4 4" 5/8" - 11 6 1/8" 1 1/4" 3 7/8" 9/16" 3/8" - 16 x 6 1/2" 800 139

K3690 - 5 5" 5/8" - 11 6 3/4" 1 1/2" 4" 9/16" 3/8" - 16 x 7 1/2" 800 166

K3690 - 6 6" 3/4" - 10 7 3/4" 1 3/16" 4 7/16" 9/16" 3/8" - 16 x 8 1/2" 1000 226

K3690 - 8 8" 3/4" - 10 9 1/4" 1" 4 15/16" 9/16" 3/8" - 16 x 10 1/2" 1200 332

Adjustable “J” Hanger - K3690

Material: SteelStandard Finish: Electro-Plated (Hot-Dip Galvanized available with Electro-Plated hardware)Service: Designed for suspending insulated pipe (with shield) and non-insulated pipe allowing forvertical adjustment. Side hole permits wall mountingOrdering: Specify part number and finish


Pipe Clamps

Pipe clamps presented in this section are designed for support and attachment ofpipe to structural steel. Various types of pipe clamps and sizes are available for nu-merous applications.Materials: Carbon Steel is used in the manufacturing of riser and pipe clamps.Stainless Steel and other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-PlatedZinc, Hot Dipped Galvanized, Red Primer, Plastic Coating, Copper Plated, StainlessSteel and other special coatings are also available.Notes: All hangers in this section are sized to fit schedule 40/80 pipe unless other-wise noted. Some steel items may be specially fabricated to accommodate otherpipe diameters. Products in this section are designed and manufactured in accor-dance with industry standards. RHK is not responsible for injuries and damagewhich could result from improper and negligent installation of the items.

115

Standard Pipe Strap - K2400

Part Number Pipe Size "A" "B" "C" "T" "W"

DesignLoad 1(Lbs.)

DesignLoad 2(Lbs.)

DesignLoad 3(Lbs.)

Wt./C(Lbs.)

K2400 - 1/2 1/2" 5/16" 7/16" 2 13/16" 10 Ga. 1 5/8" 600 150 105 23

K2400 - 3/4 3/4" 5/16" 7/16" 3" 10 Ga. 1 5/8" 600 150 105 26

K2400 - 1 1" 5/16" 7/16" 3 17/32" 10 Ga. 1 5/8" 600 150 120 31

K2400 - 1 1/4 1 1/4" 5/16" 7/16" 3 3/4" 10 Ga. 1 5/8" 600 150 120 36

K2400 - 1 1/2 1 1/2" 5/16" 7/16" 4 1/16" 10 Ga. 1 5/8" 600 150 120 39

K2400 - 2 2" 7/16" 11/16" 5 21/32" 1/4" 1 5/8" 1200 480 180 93

K2400 - 2 1/2 2 1/2" 7/16" 11/16" 6 5/32" 1/4" 1 5/8" 1200 480 180 106

K2400 - 3 3" 7/16" 11/16" 6 25/32" 1/4" 1 5/8" 1200 480 300 132

K2400 - 3 1/2 3 1/2" 7/16" 11/16" 7 9/32" 1/4" 1 5/8" 1200 480 300 151

K2400 - 4 4" 9/16" 11/16" 7 25/32" 1/4" 1 5/8" 1500 600 450 160

K2400 - 5 5" 9/16" 11/16" 8 7/8" 1/4" 1 5/8" 1500 600 450 192

K2400 - 6 6" 9/16" 11/16" 9 15/16" 1/4" 1 5/8" 1500 600 450 219

K2400 - 8 8" 9/16" 11/16" 11 31/32" 1/4" 1 5/8" 2000 800 600 297

K2400 - 10 10" 9/16" 11/16" 14" 1/4" 1 5/8" 2000 800 600 465

K2400 - 12 12" 9/16" 11/16" 16" 1/4" 1 5/8" 2000 800 600 560

K2400 - 14 14" 15/16" 1 5/16" 20 3/8" 3/8" 1 3/4" 2000 800 600 761

K2400 - 16 16" 15/16" 1 5/16" 22 3/8" 3/8" 1 3/4" 2000 800 600 861

K2400 - 18 18" 15/16" 1 5/16" 26 1/8" 1/2" 1 3/4" 2000 800 600 1297

K2400 - 20 20" 15/16" 1 5/16" 28 1/8" 1/2" 1 3/4" 2000 800 600 1426

K2400 - 24 24" 15/16" 1 5/16" 32 1/8" 1/2" 1 3/4" 2000 800 600 1682

Material: Steel (Stainless Steelavailable)Standard Finish: Plain or Electro-PlatedService: Designed for supportingpipe runs from strut supportsOrdering: Specify part numberand finish

Note: Ductile iron sizes available

DesignLoad 2

116

Two-Bolt Underground Clamp - K3132

Material: SteelStandard Finish: Plain or Electro-Plated (Hot-Dip Galvanized available)Service: Designed to prevent separation of caulked joints on AWWA ductile iron water pipesOrdering: Specify part number and finish (Order K3132W Lug Washers, Tie Rods, and Hex Nutsseparately

Part NumberNominalPipe Size "A" "B" Clamp "I.D." Bolt Size Wt./C (Lbs.)

K3132 - 4 4" 12 7/8" 9 3/4" 5" 5/8" - 11 x 3" 864

K3132 - 6 6" 14 3/4" 12" 7 1/16" 5/8" - 11 x 3" 1020

K3132 - 8 8" 17 1/4" 14 1/4" 9 3/16" 5/8" - 11 x 3" 1222

K3132 - 10 10" 19 3/8" 16 1/2" 11 3/8" 5/8" - 11 x 3" 1409

K3132 - 12 12" 21 7/8" 18 7/8" 13 1/2" 5/8" - 11 x 3" 1608

K3132 - 14 14" 26" 22 1/4" 15 3/4" 7/8" - 9 x 4 1/2" 4359

K3132 - 16 16" 28 3/8" 24 5/8" 17 7/8" 1" - 8 x 4 1/2" 6403

K3132 - 18 18" 31 3/8" 27 5/8" 20" 1 1/4" - 7 x 5" 7293

K3132 - 20 20" 33 1/2" 29 3/4" 22 1/8" 1 1/4" - 7 x 5" 8778

K3132 - 24 24" 39" 35 1/4" 26 3/8" 1 1/4" - 6 x 5 1/2" 11659

117

Lug Washer - K3132W

Part Number Tie Rod SizeFor Use with

Pipe Size Diameter "D" "E" "G" "H"Wt./C(Lbs.)

K3132W - 3/4 3/4" - 10 4" to 12" 7/8" 2 3/8" 5/8" 4 5/8" 74

K3132W - 1 1" - 8 14" to 16" 1 1/8" 3 1/2" 5/8" 2 1/2" 207

K3132W - 1 1/4 1 1/4" - 7 18" 1 3/8" 3 1/2" 5/8" 3 1/2" 236

K3132W - 1 3/8 1 3/8" - 6 20" 1 1/2" 4" 5/8" 4" 231

K3132W - 1 1/2 1 1/2" - 6 24" 1 5/8" 4" 5/8" 4" 259

Material: Ductile iron for K3132W - 3/4,steel for other sizesStandard Finish: Plain or Electro-PlatedService: Designed to use with K3132 Two-Bolt Underground Clamp for aligning andsecuring tie rodsOrdering: Specify part number and finish

118

Four Bolt Underground Clamp - K3134

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed to prevent separation of caulked joints on AWWA ductile iron waterpipesOrdering: Specify part number and finish (Order K3134W Washer, Tie Rods and HexNuts separately)

PartNumber

NominalPipe Size "A" "B" Clamp "I.D." Bolt Size

MaximumTest Pressure

(psi)

Force onClamp(Lbs.)

Wt./C(Lbs.)

K3134 - 4 4" 14 7/16" 9 5/8" 5" 5/8" - 11 x 3" 250 4550 1012

K3134 - 6 6" 16 7/8" 11 7/8" 7 1/8" 5/8" - 11 x 3" 250 9340 1204

K3134 - 8 8" 19 1/8" 14 1/8" 9 5/16" 5/8" - 11 x 3 1/2" 250 16080 2091

K3134 - 10 10" 21 3/8" 16 5/8" 11 1/2" 3/4" - 10 x 4" 250 24180 2466

K3134 - 12 12" 25 1/8" 19 5/8" 13 1/2" 7/8" - 9 x 4" 250 34230 3537

K3134 - 14 14" 28 1/4" 22 1/4" 15 3/4" 7/8" - 9 x 4 1/2" 120 22200 4718

K3134 - 16 16" 32 1/8" 26 1/4" 17 7/8" 1" - 8 x 4 1/2" 115 27760 7155

K3134 - 18 18" 35 1/8" 28 1/8" 20" 1 1/4" - 7 x 5" 100 23900 8179

K3134 - 20 20" 37 3/4" 30 1/2" 22 1/8" 1 1/4" - 7 x 5" 75 27500 9856

K3134 - 24 24" 44 1/4" 36" 26 3/8" 1 1/2" - 6 x 5 1/2" 50 26200 13384

119

Washer - K3134W

Part Number Tie Rod SizeFor Use with

Pipe SizeDiameter

"D" "E" "F" Wt./C (Lbs.)

K3134W - 3/4 3/4" - 10 4" to 8" 7/8" 3" 1/2" 119

K3134W - 1 1" - 8 10" to 12" 1 1/8" 3 1/2" 1/2" 159

K3134W - 1 1/8 1 1/8" - 7 14" to 16" 1 1/4" 3 1/2" 5/8" 181

K3134W - 1 1/4 1 1/4" - 7 18" 1 3/8" 4" 3/4" 229

K3134W - 1 3/8 1 3/8" - 6 20" 1 1/2" 4" 3/4" 223

K3134W - 1 1/2 1 1/2" - 6 24" 1 5/8" 4 1/2" 3/4" 217

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for use with K3134 Four-Bolt Underground Clamp to secure tie rodsOrdering: Specify part number and finish

120

Standard Pipe Clamp - K3140

Part NumberNominalPipe Size "A" "B" "C" Bolt Size

MaximumDesign Loadfor Service

Temperature650°F (Lbs.)



Wt./C(Lbs.)

K3140 - 1/2 1/2" 3/8" 31/32" 1 17/32" 5/16" - 18 x 1 1/4" 500 390 30

K3140 - 3/4 3/4" 9/16" 1 3/32" 1 21/32" 5/16" - 18 x 1 1/4" 500 390 31

K3140 - 1 1" 9/16" 1 5/16" 1 7/8" 5/16" - 18 x 1 1/4" 500 390 32

K3140 - 1 1/4 1 1/4" 17/32" 1 7/16" 2" 5/16" - 18 x 1 1/4" 500 390 39

K3140 - 1 1/2 1 1/2" 19/32" 1 21/32" 2 7/32" 5/16" - 18 x 1 1/4" 800 620 41

K3140 - 2 2" 9/16" 2 1/8" 2 3/4" 1/2" - 13 x 2" 1040 810 118

K3140 - 2 1/2 2 1/2" 5/8" 2 21/32" 3 9/32" 1/2" - 13 x 2" 1040 810 130

K3140 - 3 3" 5/8" 2 15/16" 3 9/16" 1/2" - 13 x 2" 1040 810 150

K3140 - 3 1/2 3 1/2" 5/8" 3 5/32" 3 25/32" 1/2" - 13 x 2" 1040 810 158

K3140 - 4 4" 3/4" 3 9/16" 4 5/16" 5/8" - 11 x 2 1/4" 1040 810 239

K3140 - 5 5" 3/4" 4 1/8" 4 7/8" 5/8" - 11 x 2 1/4" 1040 810 272

K3140 - 6 6" 7/8" 4 15/16" 5 13/16" 3/4" - 10 x 2 3/4" 1615 1260 541

K3140 - 8 8" 1" 6 1/16" 6 15/16" 3/4" - 10 x 3" 1615 1260 642

K3140 - 10 10" 1" 7 3/8" 8 11/16" 7/8" - 9 x 3 1/2" 2490 1950 1366

K3140 - 12 12" 1" 8 7/16" 9 3/4" 7/8" - 9 x 3 1/2" 2490 1950 1543

K3140 - 14 14" 1 1/8" 9 1/4" 10 5/8" 7/8" - 9 x 3 1/2" 2490 1950 2077

K3140 - 16 16" 1 1/8" 10 1/4" 11 5/8" 7/8" - 9 x 3 1/2" 2490 1950 2289

K3140 - 18 18" 1 1/4" 11 7/8" 13 1/4" 1" - 8 x 4" 3060 2390 3206

K3140 - 20 20" 1 3/8" 12 3/4" 14 1/8" 1 1/8" - 7 x 4 1/2" 3060 2390 3616

K3140 - 24 24" 1 5/8" 15 1/4" 16 7/8" 1 1/4" - 7 x 5" 3060 2390 5161

K3140 - 30 30" 2 1/4" 18 5/8" 21" 1 1/2" - 6 x 6" 3500 2740 10460

Material: Steel (Stainless Steel available)Standard Finish: Plain, Electro-Plated, or Hot-Dip Galva-nizedService: Designed for suspending non-insulated piperuns (Use with K3200 Weldless Eye Nut, K3210 Eye Rod,or K3211 Welded Eye Rod)Ordering: Specify part number and finish

121

Heavy Duty Pipe Clamp - K3142

PartNumber

NominalPipe Size "A" "B" "C" Bolt Size





Wt./C(Lbs.)

K3142 - 3 3" 1" 3 1/8" 4 1/8" 3/4" - 10 x 2 3/4" 3370 2640 404

K3142 - 4 4" 1" 3 3/4" 5 1/16" 7/8" - 9 x 3" 3515 2750 616

K3142 - 5 5" 1" 4 3/8" 5 11/16" 7/8" - 9 x 3" 3515 2750 687

K3142 - 6 6" 1 1/8" 5 1/4" 6 1/4" 1" - 8 x 3 1/2" 4865 3800 1293

K3142 - 8 8" 1 1/8" 6 1/4" 7 3/4" 1" - 8 x 4" 4865 3800 1523

K3142 - 10 10" 1 1/4" 7 11/16" 9 1/16" 1 1/4" - 7 x 4" 6010 4700 2348

K3142 - 12 12" 1 5/8" 9 1/8" 10 3/4" 1 1/4" - 7 x 5" 8675 6770 3749

K3142 - 14 14" 1 5/8" 10 1/8" 12" 1 1/2" - 6 x 5 1/2" 9120 7140 5011

K3142 - 16 16" 1 5/8" 11" 12 7/8" 1 3/4" - 5 x 5 1/2" 9120 7140 5885

K3142 - 18 18" 3" 14 1/2" 18 1/2" 2" - 4 1/2 x 7" 13800 10800 12902

K3142 - 20 20" 3" 16" 20" 2" - 4 1/2 x 7" 15300 11900 15113

K3142 - 24 24" 3 1/4" 18 1/2" 23" 2" - 4 1/2 x 8" 16300 12700 20561

K3142 - 30 30" 3 1/2" 22 1/2" 27 1/2" 2 1/4" - 4 1/2 x 9" 20500 16000 36658

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending non-insulated, heavy-duty pipe runs (use withK3200 Weldless Eye Nut, K3210 Eye Rodor K3211 Welded Eye Rod)Ordering: Specify part number and finish

122

Double Bolt Pipe Clamp - K3144...

Part NumberNominalPipe Size "A" Bolt Size "B¹" Bolt Size "B²" "C"

K3144 - 3/4 3/4" 5/8" 3/8" - 16 x 1 3/4" 1/2" - 13 x 2" 1 3/8"

K3144 - 1 1" 5/8" 3/8" - 16 x 1 3/4" 1/2" - 13 x 2" 1 3/8"

K3144 - 1 1/4 1 1/4" 5/8" 3/8" - 16 x 1 3/4" 1/2" - 13 x 2" 1 1/2"

K3144 - 1 1/2 1 1/2" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 1 13/16"

K3144 - 2 2" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 2 1/8"

K3144 - 2 1/2 2 1/2" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 2 3/8"

K3144 - 3 3" 1 1/16" 1/2" - 13 x 2 1/2" 5/8" - 11 x 2 1/2" 2 15/16"

K3144 - 4 4" 1 1/16" 5/8" - 11 x 2 3/4" 3/4" - 10 x 3" 3 1/2"

K3144 - 5 5" 1 1/16" 5/8" - 11 x 2 3/4" 3/4" - 10 x 3" 4"

K3144 - 6 6" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 5"

K3144 - 8 8" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 6"

K3144 - 10 10" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 7 1/8"

K3144 - 12 12" 1 7/16" 3/4" - 10 x 3 1/4" 1" - 8 x 3 1/2" 7 7/8"

K3144 - 14 14" 2" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5" 9 1/16"

K3144 - 16 16" 2" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5" 10 1/16"

K3144 - 18 18" 2" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5" 11 1/16"

K3144 - 20 20" 2" 1" - 8 x 5" 1 1/4" - 7 x 5" 12 3/8"

K3144 - 24 24" 2" 1 1/8" - 7 x 5" 1 1/2" - 6 x 5 1/2" 14 3/4"

123

Double Bolt Pipe Clamp (cont.)

Part Number "D" "E" "F"

Maximum DesignLoad for Service

Temperature 650°F(Lbs.)



Wt./C(Lbs.)

K3144 - 3/4 4" 4 3/4" 1 7/8" 950 740 146

K3144 - 1 4" 4 3/4" 1 7/8" 950 740 147

K3144 - 1 1/4 4" 4 3/4" 2" 950 740 152

K3144 - 1 1/2 4 1/8" 4 7/8" 2 3/8" 1545 1200 200

K3144 - 2 5 1/8" 5 7/8" 2 11/16" 1545 1200 226

K3144 - 2 1/2 5 3/8" 6 1/8" 2 15/16" 1545 1200 239

K3144 - 3 5 15/16" 6 11/16" 3 1/2" 1545 1200 264

K3144 - 4 6 1/2" 7 5/8" 4 1/2" 2500 1950 672

K3144 - 5 7" 8 1/8" 5" 2500 1950 752

K3144 - 6 8 9/16" 9 15/16" 6 1/8" 2865 2240 1158

K3144 - 8 9 9/16" 10 15/16" 7 1/8" 2865 2240 1325

K3144 - 10 10 5/8" 12" 8 1/4" 3240 2530 1505

K3144 - 12 11 5/8" 13" 9 1/4" 3240 2530 1671

K3144 - 14 12 11/16" 14 5/16" 10 11/16" 4300 3360 3666

K3144 - 16 13 11/16" 15 5/16" 11 11/16" 4300 3360 3992

K3144 - 18 14 11/16" 16 5/16" 12 11/16" 4300 3360 4330

K3144 - 20 15 7/8" 17 1/2" 14" 4500 3520 5535

K3144 - 24 17 7/8" 19 1/2" 16 3/8" 4500 3520 6590

Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending high-temperature(maximum 750°F) pipe runs requiring up to 4” thickinsulation (use with K3200 Welded Eye Rod)Ordering: Specify part number and finish. For ser-vice temperatures of 750°F thru 1050°F specify type304 Stainless Steel

124

Heavy Duty Double Bolt Pipe Clamp - K3146

Part NumberNominalPipe Size "A" Bolt Size "B¹" Bolt Size "B²"

K3146 - 6 6" 1 3/4" 3/4" - 10 x 3 1/2" 1" - 8 x 4"

K3146 - 8 8" 2" 3/4" - 10 x 4" 1" - 8 x 4 1/2"

K3146 - 10 10" 2 1/4" 1" - 8 x 4 1/2" 1 1/4" - 7 x 5"

K3146 - 12 12" 2 1/2" 1" - 8 x 5" 1 1/4" - 7 x 5 1/2"

K3146 - 14 14" 2 1/2" 1 1/8" - 7 x 5 1/2" 1 1/2" - 6 x 6"

K3146 - 16 16" 3" 1 1/4" - 7 x 6" 1 3/4" - 5 x 6 1/2"

K3146 - 18 18" 3 1/2" 1 1/2" - 6 x 7 1/2" 2" - 4 1/2 x 8"

K3146 - 20 20" 3 1/2" 1 1/2" - 6 x 7 1/2" 2" - 4 1/2 x 8"

K3146 - 24 24" 3 1/2" 1 1/2" - 6 x 7 1/2" 2" - 4 1/2 x 8"

K3146 - 30 30" 4 1/4" 1 3/4" - 5 x 8 1/2" 2 1/4" - 4 1/2 x 9"

PartNumber "C" "D" "E" "F"




Temperature 750°F(Lbs.) Wt./C (Lbs.)

K3146 - 6 4 3/4" 8 15/16" 10 3/16" 6" 3500 2740 1182

K3146 - 8 6" 10 3/8" 11 3/8" 7 1/4" 4800 3750 1742

K3146 - 10 7 1/4" 11 3/8" 13 1/8" 9" 5500 4300 2979

K3146 - 12 8 5/8" 12 9/16" 14 5/16" 10 3/8" 8675 6790 3847

K3146 - 14 9 5/8" 13 1/2" 15 1/2" 11 5/8" 9500 7400 6104

K3146 - 16 10 7/8" 14 7/8" 17 1/8" 13 1/8" 10000 7800 7899

K3146 - 18 12 1/2" 16 1/4" 18 1/4" 14 1/2" 13800 10800 10588

K3146 - 20 13 1/2" 17 1/4" 19 3/4" 16" 15300 11900 14180

K3146 - 24 15 1/2" 19 5/16" 22 5/16" 18 1/2" 16300 12700 19145

K3146 - 30 19 7/8" 28 1/4" 32 3/4" 24 3/8" 20500 16000 34983

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for suspending heavy-duty, high temperature pipe runs requir-ing up to 4” thick insulation (use withK3200 Weldless Eye Nut, K3210 Eye Rodor K3211 Welded Eye RodOrdering: Specify part number and finish

125

Offset Pipe Clamp - K3148

Part NumberNominalPipe Size "A" Bolt Size "B" "C" "H"

Design Load(Lbs.)

Wt./C(Lbs.)

K3148 - 1/2 1/2" 2 1/2" 3/8" - 16 x 1 1/2" 6" 7/16" 190 106

K3148 - 3/4 3/4" 2 1/2" 3/8" - 16 x 1 1/2" 7 5/16" 7/16" 190 112

K3148 - 1 1" 2 5/8" 3/8" - 16 x 1 1/2" 7 9/16" 7/16" 190 123

K3148 - 1 1/4 1 1/4" 2 13/16" 3/8" - 16 x 1 1/2" 7 7/8" 7/16" 190 133

K3148 - 1 1/2 1 1/2" 2 15/16" 3/8" - 16 x 1 1/2" 8 1/4" 7/16" 190 140

K3148 - 2 2" 3 3/16" 3/8" - 16 x 1 3/4" 9 1/8" 7/16" 420 195

K3148 - 2 1/2 2 1/2" 3 7/16" 3/8" - 16 x 1 3/4" 10 1/2" 7/16" 420 226

K3148 - 3 3" 3 3/4" 3/8" - 16 x 1 3/4" 11 1/8" 7/16" 420 244

K3148 - 4 4" 4 1/4" 1/2" - 13 x 2" 12 1/2" 9/16" 610 358

K3148 - 5 5" 4 3/4" 1/2" - 13 x 2 1/4" 13 3/4" 9/16" 610 415

K3148 - 6 6" 5 5/16" 1/2" - 13 x 2 1/4" 16 1/2" 9/16" 870 685

K3148 - 8 8" 6 5/16" 1/2" - 13 x 2 1/2" 18 5/8" 9/16" 870 815

K3148 - 10 10" 7 3/4" 3/4" - 10 x 3" 23" 13/16" 870 2142

K3148 - 12 12" 8 3/4" 3/4" - 10 x 3" 25" 13/16" 870 2337

Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for supporting verticalor horizontal pipe runs at a fixeddistance from a wall or structureOrdering: Specify part number

Note: Ductile and cast iron sizes are available

126

Marine Hanger - K3149

Part NumberNominalPipe Size "A" Bolt Size "B" "C" Wt./C (Lbs.)

K3149 - 3/4 3/4" 12" 3/8" - 16 x 1 1/2" 4 7/16" 182

K3149 - 1 1" 12" 3/8" - 16 x 1 1/2" 4 11/16" 230

K3149 - 1 1/4 1 1/4" 12" 3/8" - 16 x 1 1/2" 5" 239

K3149 - 1 1/2 1 1/2" 12" 3/8" - 16 x 1 1/2" 5 1/4" 244

K3149 - 2 2" 12" 1/2" - 13 x 1 3/4" 6" 319

K3149 - 2 1/2 2 1/2" 12" 1/2" - 13 x 2" 7 1/4" 434

K3149 - 3 3" 12" 1/2" - 13 x 2" 7 7/8" 454

K3149 - 4 4" 12" 1/2" - 13 x 2" 9 1/4" 493

K3149 - 5 5" 12" 1/2" - 13 x 2" 10 1/2" 530

K3149 - 6 6" 12" 5/8" - 11 x 2 1/2" 12 1/2" 1142

K3149 - 8 8" 12" 5/8" - 11 x 2 1/2" 14 5/8" 1273

Material: Steel (Stainless Steel available)Standard Finish: Plain or Electro-PlatedService: Designed for suspending or supporting pipe runs where exact dis-tance from structure to pipe cannot be determined until installation. Fieldmodify legs to suit conditionsOrdering: Specify part number and finish

Note: Ductile and cast iron sizes are available

127

Standard Riser Clamp - K3373

Part Number Pipe Size "L" Bolt SizeDesign Load

(Lbs.)Wt./C(Lbs.)

K3373 - 1/2 1/2" 9" 3/8" - 16 x 1 1/4" 255 101

K3373 - 3/4 3/4" 9 1/4" 3/8" - 16 x 1 1/4" 255 105

K3373 - 1 1" 9 9/16" 3/8" - 16 x 1 1/4" 255 109

K3373 - 1 1/4 1 1/4" 10" 3/8" - 16 x 1 1/4" 255 112

K3373 - 1 1/2 1 1/2" 10 1/4" 3/8" - 16 x 1 1/2" 255 113

K3373 - 2 2" 10 3/4" 3/8" - 16 x 1 1/2" 255 165

K3373 - 2 1/2 2 1/2" 11 1/4" 3/8" - 16 x 1 1/2" 390 180

K3373 - 3 3" 11 15/16" 3/8" - 16 x 1 1/2" 530 195

K3373 - 3 1/2 3 1/2" 12 3/8" 1/2" - 13 x 1 3/4" 670 217

K3373 - 4 4" 12 7/8" 1/2" - 13 x 1 3/4" 810 228

K3373 - 5 5" 14" 1/2" - 13 x 1 3/4" 1160 480

K3373 - 6 6" 15 3/16" 1/2" - 13 x 2" 1570 526

K3373 - 8 8" 17 3/4" 5/8" - 11 x 2 1/2" 2500 957

K3373 - 10 10" 19 7/16" 5/8" - 11 x 2 1/2" 2500 1101

K3373 - 12 12" 21 11/16" 5/8" - 11 x 3" 2700 1622

K3373 - 14 14" 23 9/16" 5/8" - 11 x 3" 2700 1732

K3373 - 16 16" 26 3/8" 3/4" - 10 x 3 1/4" 2900 2959

K3373 - 18 18" 28 7/8" 3/4" - 10 x 3 1/4" 2900 3235

K3373 - 20 20" 30 7/8" 3/4" - 10 x 3 1/2" 2900 3568

K3373 - 24 24" 34 7/8" 3/4" - 10 x 3 1/2" 2900 4064

K3373 - 30 30" 40 3/4" 7/8" - 9 x 3 1/2" 2900 6016

Material: Steel (Stainless Steel available)Standard Finish: Plain, Electro-Plated, or Hot-DipGalvanizedService: Designed for supporting and stabilizingvertical pipe runs. Clamp is fitted for steel pipeand preferable installed below a coupling or shearlugs. Torque bolts to values given on page __Ordering: Specify part number and finish

K3373PVC Plastic Coated

128

Riser Clamp Copper- K3373CU

Part NumberNominal Tubing

Size "L" Bolt Size Design Load (Lbs.) Wt./C (Lbs.)

K3373CT - 1/2 1/2" 8 3/4" 5/16" - 18 x 1" 75 72

K3373CT - 3/4 3/4" 9 1/16" 5/16" - 18 x 1" 75 73

K3373CT - 1 1" 9 5/16" 3/8" - 16 x 1" 120 74

K3373CT - 1 1/4 1 1/4" 9 5/8" 3/8" - 16 x 1" 150 77

K3373CT - 1 1/2 1 1/2" 9 3/4" 3/8" - 16 x 1 1/4" 150 111

K3373CT - 2 2" 10 7/16" 3/8" - 16 x 1 1/4" 150 120

K3373CT - 2 1/2 2 1/2" 10 15/16" 3/8" - 16 x 1 1/4" 300 128

K3373CT - 3 3" 11 7/16" 3/8" - 16 x 1 1/4" 300 136

K3373CT - 3 1/2 3 1/2" 11 15/16" 3/8" - 16 x 1 1/4" 300 145

K3373CT - 4 4" 12 1/2" 1/2" - 13 x 1 3/4" 300 170

K3373CT - 5 5" 13 5/8" 1/2" - 13 x 2" 500 355

K3373CT - 6 6" 14 5/8" 1/2" - 13 x 2" 500 386

Material: SteelStandard Finish: CopperService: Designed to support and stabilizevertical runs of copper tubing (available withplastic coasting to provide additional separa-tion between tubing and hanger)Ordering: Specify part number and finish


Pipe Rollers + Pipe SupportsPipe rollers presented in this section are designed to accommodate for longitudinalmovement due to the expansion and contraction of both insulated and non-insulatedpipe.Material: Carbon Steel and Cast Iron rollers are used in the manufacturing of piperoller supports. Stainless Steel and other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-Plated Zinc,Hot Dipped Galvanized, Red Primer, Plastic Coating, Stainless Steel and other specialcoatings are also available.Notes: Products in this section are designed and manufactured in accordance with in-dustry standards. RHK is not responsible for injuries and damage which could resultfrom improper and negligent installation of the items.

91

Pipe Rollers 6” to 18” Pipe - K379

Insulation Thickness

Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

6" 6 7/8" 7 7/8" 8 3/8" 8 7/8" 9 3/8" 9 7/8" 10 15/16"

8" 7 13/16" 8 7/8" 9 3/8" 9 7/8" 10 7/16" 10 15/16" 11 7/8"

10" 8 13/16" 9 7/8" 10 7/16" 10 15/16" 11 3/8" 11 7/8" 12 13/16"

12" 9 3/4" 10 15/16" 11 3/8" 11 7/8" 12 5/16" 12 13/16" 13 3/4"

14" 10 5/16" 11 3/8" 11 7/8" 12 5/16" 12 13/16" 13 1/4" 14 1/4"

16" 11 5/16" 12 5/16" 12 13/16" 13 1/4" 13 3/4" 14 1/4" 15 1/8"

18" 12 1/4" 13 1/4" 13 3/4" 14 3/16" 14 11/16" 15 1/8" 16 1/16"

Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut(metal framing) for the support of pipewith longitudinal movement.Ordering: Specify part number and finishDesign Load: 1500 Lbs.


Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

6" 9 9/16" 10 3/16" 10 5/8" 11" 11 3/8" 11 3/4" 12 1/2"

8" 10 1/4" 11 1/16" 11 3/8" 11 3/4" 12 3/16" 12 1/2" 13 1/4"

10" 11" 11 3/4" 12 1/8" 12 1/2" 12 13/16" 13 1/8" 13 7/8"

12" 11 11/16" 12 9/16" 12 7/8" 13 1/4" 13 9/16" 13 7/8" 14 5/8"

14" 12 1/16" 12 7/8" 13 3/16" 13 9/16" 13 7/8" 14 1/4" 14 7/8"

16" 12 3/4" 13 1/2" 13 7/8" 14 13/16" 14 1/2" 14 7/8" 15 1/2"

18" 13 1/2" 14 1/4" 14 5/8" 15" 15 5/16" 15 5/8" 16 5/16"

Reference Chart: B Dimension

Note: Not for continuous cycling applications

Reference Chart: A Dimension

92

Pipe Rollers 1/2” to 8” Pipe - K218...

Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut (metalframing) for the support of pipe with longi-tudinal movement.Ordering: Specify part number and finishDesign Load: 500 Lbs.

Notes: Channel and mounting hardware not included. Not for continuous cycling applications

93


Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

1/2" 2 11/16" - - - - - -

3/4" 2 13/16" 3 7/8" 4 3/8" 4 7/8" - - -

1" 2 15/16" 4 3/16" 4 11/16" 5 1/16" - - -

1 1/4" 3 1/8" 4 3/16" 4 5/8" 5 1/8" - - -

1 1/2" 3 1/4" 4 3/8" 4 7/8" 5 5/16" 5 3/4" - -

2" 3 9/16" 4 11/16" 5 1/16" 5 5/8" 6 1/16" - -

2 1/2" 3 13/16" 4 7/8" 5 5/16" 6" 6 3/8" - -

3" 4 1/8" 5 1/16" 5 9/16" 6 1/8" 6 7/16" 7" -

3 1/2" 4 3/8" 5 5/16" 5 13/16" 6 1/4" 6 11/16" 7 1/4" -

4" 4 5/8" 5 9/16" 6 1/16" 6 7/16" 6 15/16" 7 3/8" -

5" 5 1/2" 6 1/6" 6 7/16" 7" 7 3/8" 7 7/8" 8 13/16"

6" 5 1/2" 6 7/16" 6 15/16" 7 3/8" 7 15/16" 8 1/2" 9 1/2"

8" 6 15/16" 7 3/8" 7 15/16" 8 7/16" 8 15/16" - -



Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

1/2" 7 1/4" - - - - - -

3/4" 7 1/4" 7 1/4" 7 5/8" 8" - - -

1" 7 1/4" 7 1/4" 7 5/8" 8 1/4" - - -

1 1/4" 7 1/4" 7 1/4" 8" 8 1/4" - - -

1 1/2" 7 1/4" 7 5/8" 8" 8 1/2" 9" - -

2" 7 1/4" 7 5/8" 8 1/2" 8 1/2" 9" - -

2 1/2" 7 1/4" 8" 8 1/2" 9" 10" - -

3" 7 1/4" 8 1/2" 9" 9" 10" 10" -

3 1/2" 7 1/4" 8 1/2" 9" 10" 10" 10" -

4" 7 5/8" 9" 9" 10" 10" 10" -

5" 8 1/2" 9" 10" 10" 11" 11" 12"

6" 9" 10" 10" 11" 11" 11" 12"

8" 10" 11" 11" 11" 12" - -


Pipe Rollers 1/2” to 8” Pipe - K218 (cont.)

94

Part Number "A" Wt./C (Lbs.)

K219 7 1/4" 253

K219 - 1 8" 258

K219 - 2 9" 263

K219 - 3 10" 269

K219 - 4 10 7/8" 274

K219 - 5 11 5/8" 279

Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut (metalframing) for the support of pipe with longitu-dinal movement.Ordering: Specify part number and finishDesign Load: 750 Lbs.


Pipe Rollers 3/4” to 12” Pipe - K219...

95

Pipe Rollers 3/4” to 12” Pipe (cont.)


Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

1/2" K219 - - - - - -

3/4" K219 K219 K219 K219 - 1 - - -

1" K219 K219 K219 - 1 K219 - 1 - - -

1 1/4" K219 K219 K219 - 1 K219 - 1 - - -

1 1/2" K219 K219 K219 - 1 K219 - 2 K219 - 2 - -

2" K219 K219 - 1 K219 - 1 K219 - 2 K219 - 2 - -

2 1/2" K219 K219 - 1 K219 - 2 K219 - 2 K219 - 3 - -

3" K219 K219 - 1 K219 - 2 K219 - 2 K219 - 3 K219 - 3 -

3 1/2" K219 - 1 K219 - 2 K219 - 2 K219 - 3 K219 - 3 K219 - 4 -

4" K219 - 1 K219 - 2 K219 - 2 K219 - 3 K219 - 3 K219 - 4 -

5" K219 - 1 K219 - 2 K219 - 3 K219 - 3 K219 - 4 K219 - 4 K219 - 5

6" K219 - 2 K219 - 3 K219 - 3 K219 - 4 K219 - 4 K219 - 5 K219 - 5

8" K219 - 3 K219 - 4 K219 - 4 K219 - 5 K219 - 5 - -

10" K219 - 4 K219 - 5 - - - - -

12" K219 - 5 - - - - - -


Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

1/2" 2 11/16" - - - - - -

3/4" 2 13/16" 3 7/8" 4 1/2" 4 7/8" - - -

1" 2 15/16" 4 3/16" 4 5/8" 5 1/16" - - -

1 1/4" 3 1/8" 4 3/16" 4 5/8" 5 1/8" - - -

1 1/2" 3 1/4" 4 7/16" 4 7/8" 5 1/4" 5 3/8" - -

2" 3 9/16" 4 5/8" 5 3/16" 5 1/2" 6 1/16" - -

2 1/2" 3 3/4" 4 7/8" 5 1/4" 6" 6 3/8" - -

3" 4 1/8" 5 1/8" 5 9/16" 6 1/16" 6 7/16" 6 15/16" -

3 1/2" 4 1/8" 5 1/4" 5 13/16" 6 1/4" 6 11/16" 7 1/16" -

4" 4 9/16" 5 1/2" 6 1/16" 6 7/16" 6 15/16" 7 3/8" -

5" 5 1/16" 6 1/16" 6 7/16" 7" 7 3/8" 7 7/8" 8 15/16"

6" 5 7/16" 6 7/16" 6 15/16" 7 3/8" 7 7/8" 8 15/16" 9 9/16"

8" 6 3/8" 7 7/16" 7 15/16" 8 3/8" 9" - -

10" 7 5/16" 8 3/16" - - - - -

12" 8 1/4" - - - - - -

96

Adjustable Steel Yoke Pipe Roll - K3110...

Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for suspending pipe where longitudinal movement and verticaladjustment is required. When used with insulated pipe, see K3160 - K3165 PipeCovering Protection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with stainlesssteel yoke and hardware are available for most sizes (K3110NM-Pipe Size). Not forcontinuous cycling applications

97

Adjustable Steel Yoke Pipe Roll - K3110 (cont.)


Rod Size"A" "B"

K3110 - 2 2" 3/8" - 16 1 9/16"

K3110 - 2 1/2 2 1/2" 1/2" - 13 1 7/8"

K3110 - 3 3" 1/2" - 13 2 3/16"

K3110 - 3 1/2 3 1/2" 1/2" - 13 2 1/2"

K3110 - 4 4" 5/8" - 11 2 3/4"

K3110 - 5 5" 5/8" - 11 3 3/8"

K3110 - 6 6" 3/4" - 10 3 15/16"

K3110 - 8 8" 3/4" - 10 5 1/16"

K3110 - 10 10" 7/8" - 9 6 1/4"

K3110 - 12 12" 7/8" - 9 7 3/8"

K3110 - 14 14" 1" - 8 8 1/4"

K3110 - 16 16" 1" - 8 9 1/4"

K3110 - 18 18" 1" - 8 10 3/8"

K3110 - 20 20" 1 1/4" - 7 11 1/2"

K3110 - 24 24" 1 1/2" - 6 13 13/16"

Part Number "C" "D" "E" "F"Maximum O.D.

CoveringDesign

Load (Lbs.)Wt./C(Lbs.)

K3110 - 2 4 3/4" 2 3/8" 1 7/16" 2 7/8" 2 5/8" 150 123

K3110 - 2 1/2 6" 3 3/16" 2" 3 1/4" 3" 225 178

K3110 - 3 6 5/8" 3 1/2" 2" 3 7/8" 3 5/8" 310 206

K3110 - 3 1/2 7 1/4" 3 3/4" 2" 4 3/8" 4 1/8" 390 267

K3110 - 4 7 7/8" 4" 2" 4 7/8" 4 11/16" 475 344

K3110 - 5 9 3/16" 4 9/16" 2" 5 15/16" 5 3/4" 685 600

K3110 - 6 10 3/8" 5 1/16" 2" 7" 6 3/4" 780 800

K3110 - 8 12 5/8" 6 1/16" 2" 9" 8 3/4" 780 1300

K3110 - 10 14 15/16" 7 3/16" 2 1/16" 11 1/8" 10 3/4" 965 1600

K3110 - 12 17 3/8" 8 3/8" 2 1/4" 13 3/8" 13" 1200 2600

K3110 - 14 19" 8 3/4" 2 1/4" 14 1/2" 14 1/4" 1200 3400

K3110 - 16 20 3/4" 9 3/4" 2" 16 3/8" 16 1/8" 1200 3900

K3110 - 18 23 11/16" 11 7/16" 2 11/16" 18 3/8" 18 1/8" 1400 4900

K3110 - 20 25 7/8" 12 1/4" 2 1/2" 20 3/8" 20 1/8" 1600 6686

K3110 - 24 31 9/16" 15" 3 1/2" 24 5/8" 24 3/8" 1800 11630

98

Pipe Rollers 16” to 30” Pipe - K479


Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

16" 15 3/16" 15 5/8" 15 7/8" 16" 16 1/4" 16 1/2" 17"

18" 15 1/2" 16" 16 3/16" 16 3/8" 16 9/16" 16 3/4" 17 3/16"

20" 16" 16 3/8" 16 9/16" 16 7/8" 16 15/16" 17 3/16" 17 1/2"

24" 16 13/16" 17 5/16" 17 1/2" 17 1/2" 17 11/16" 17 7/8" 18 1/8"

30" 17 13/16" 18 1/4" 18 3/8" 18 9/16" 18 7/8" 18 7/8" 19 1/4"


Pipe Size 0" 1" 1 1/2" 2" 2 1/2" 3" 4"

16" 10 13/16" 11 15/16" 12 3/8" 12 15/16" 13 3/8" 13 15/16" 14 15/16"

18" 11 7/8" 12 15/16" 13 7/16" 13 15/16" 14 7/16" 14 15/16" 15 15/16"

20" 12 3/16" 13 15/16" 14 7/16" 14 7/8" 15 7/16" 15 7/8" 16 15/16"

24" 14 13/16" 15 7/8" 16 3/8" 16 7/8" 17 3/8" 17 7/8" 18 7/8"

30" 17 13/16" 18 7/8" 19 3/8" 19 7/8" 20 3/8" 20 5/16" 21 15/16"


Material: Steel with malleable iron rollersStandard Finish: Electro-PlatedService: Designed to mount on strut (metal framing) for the sup-port of pipe with longitudinal movementOrdering: Specify part number and finishDesign Load: 2000 Lbs.



99

Pipe Roll with Socket - K3114


Rod Size"A" "B" "C" "D" "E"

MaximumO.D.

Covering

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3114 - 2 2" 3/8" - 16 2 5/8" 4 1/8" 1 9/16" 3/4" 3 3/4" 600 119

K3114 - 2 1/2 2 1/2" 1/2" - 13 3 1/8" 4 7/8" 1 7/8" 3/4" 3 3/4" 660 140

K3114 - 3 3" 1/2" - 13 3 3/4" 5 1/2" 2 3/16" 3/4" 4 1/2" 700 158

K3114 - 3 1/2 3 1/2" 1/2" - 13 4 1/4" 6 1/8" 2 1/2" 3/4" 5" 750 170

K3114 - 4 4" 5/8" - 11 4 3/4" 6 3/4" 2 3/4" 3/4" 5 7/8" 750 188

K3114 - 5 5" 5/8" - 11 5 13/16" 8 1/16" 3 3/8" 3/4" 7" 750 246

K3114 - 6 6" 3/4" - 10 6 7/8" 9 9/16" 3 15/16" 1 1/8" 8 1/4" 1070 504

K3114 - 8 8" 7/8" - 9 8 7/8" 11 15/16" 5 1/16" 1 1/8" 10 1/2" 1350 658

K3114 - 10 10" 7/8" - 9 11" 14 1/16" 6 1/4" 1 1/8" 12 3/4" 1730 849

K3114 - 12 12" 7/8" - 9 13" 15 13/16" 7 3/8" 1 1/8" 14 3/4" 2400 1200

K3114 - 14 14" 1" - 8 14 1/4" 17 3/4" 8 1/4" 1 1/2" 16 1/4" 3130 2289

K3114 - 16 16" 1" - 8 16 1/4" 19 3/4" 9 1/4" 1 1/2" 18" 3970 2497

K3114 - 18 18" 1" - 8 18 1/4" 21 7/8" 10 3/8" 1 1/2" 20 1/4" 4200 2899

K3114 - 20 20" 1 1/4" - 7 20 1/4" 24 1/4" 11 1/2" 1 1/2" 22 1/2" 4550 3637

K3114 - 24 24" 1 1/2" - 6 24 1/4" 28 7/8" 13 13/16" 2" 26 1/2" 6160 5664

K3114 - 30 30" 1 1/2" - 6 30 1/4" 35 1/2" 17 1/4" 2" 32 1/2" 7290 9437

Material: Steel axle with castiron roller/malleable socketsStandard Finish: Plain or Electro-PlatedService: Designed for suspend-ing piping where longitudinalmovement and vertical adjust-ment is required. When usedwith insulated pipe, see K3160 -K3165 Pipe Covering Saddlecharts for proper sizing on pages66-73Ordering: Specify part numberand finish

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip galva-nized sockets and stainless steel hardware are available for most sizes. Not for continuouscycling applications.

100

Long Pattern Pipe - K3114R

Part NumberNominalPipe Size "A" "B" "C"

Axle Diameter"D" "L" Wt./C (Lbs.)

K3114R - 2 2" 1 1/16" 3/4" 1 9/16" 3/8" 2 5/8" 29

K3114R - 2 1/2 2 1/2" 1 1/4" 7/8" 1 7/8" 1/2" 3 1/8" 47

K3114R - 3 3" 1 3/8" 7/8" 2 3/16" 1/2" 3 3/4" 62

K3114R - 3 1/2 3 1/2" 1 1/2" 1" 2 1/2" 1/2" 4 1/4" 71

K3114R- 4 4" 1 19/32" 1" 2 3/4" 1/2" 4 3/4" 96

K3114R - 5 5" 1 7/8" 1 1/8" 3 3/8" 5/8" 5 13/16" 131

K3114R- 6 6" 2 1/8" 1 1/4" 3 15/16" 3/4" 6 7/8" 207

K3114R - 8 8" 2 5/8" 1 1/2" 5 1/16" 7/8" 8 7/8" 323

K3114R - 10 10" 3 3/16" 1 3/4" 6 1/4" 7/8" 11" 482

K3114R - 12 12" 3 3/4" 2" 7 3/8" 1" 13" 854

K3114R - 14 14" 4 3/8" 2 1/2" 8 1/4" 1 1/8" 14 1/4" 1150

K3114R - 16 16" 4 5/8" 2 1/2" 9 1/4" 1 1/4" 16 1/4" 1200

K3114R - 18 18" 5 1/8" 2 3/4" 10 3/8" 1 1/4" 18 1/4" 1550

K3114R - 20 20" 5 5/8" 3" 11 1/2" 1 3/8" 20 1/4" 2080

K3114R - 24 24" 6 3/4" 3 5/8" 13 13/16" 1 1/2" 24 1/4" 3300

K3114R - 30 30" 8 1/2" 4 1/2" 17 1/4" 1 3/4" 30 1/4" 6200

Material: Cast IronStandard Finish: Plain or Electro-PlatedService: Designed for supportingpipe runs with longitudinal move-ment. Use with steel rod axleOrdering: Specify part number andfinish

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes

101

Short Pattern Pipe Roller - K3117R

Part Number Nominal Pipe Size Axle Diameter "A" "D" "L" Wt./C (Lbs.)

K3117R - 2 to 3 1/2 2" to 3 1/2" 1/2" 1 7/8" 2 3/4" 70

K3117R- 4 to 6 4" to 6" 1/2" 2 1/16" 3 3/4" 114

K3117R - 8 to 10 8" to 10" 3/4" 3 1/4" 6" 329

K3117R - 12 to 14 12" to 14" 7/8" 4" 8" 600

K3117R - 16 to 20 16" to 20" 1 1/8" 4 1/2" 9" 781

K3117R - 24 24" 1 1/4" 4 7/16" 10" 842

K3117R - 30 30" 1 3/4" 5 1/2" 12 1/2" 1385

K3117R - 36 to 42 36" to 42" 2" 6" 14 7/8" 1585

Material: Cast IronStandard Finish: Plain or Electro-PlatedService: Designed for supporting pipe runs with longitudinal movement.Use with steel rod axleOrdering: Specify part number and finish

102

Steel Roller Stand - K3117SL...

Part Number Nominal Pipe Size "A" "B" "C" "D"

K3117SL - 2 to 3 1/2

2" 1 3/4" 8 3/8" 6" 4"

2 1/2" 1 3/4" 8 3/8" 6" 4"

3" 1 3/4" 8 3/8" 6" 4"

3 1/2" 1 3/4" 8 3/8" 6" 4"

K3117SL - 4 to 6

4" 2 1/16" 9 7/8" 6" 4 1/4"

5" 2 1/16" 9 7/8" 6" 4 1/4"

6" 2 1/16" 9 7/8" 6" 4 1/4"

K3117SL - 8 to 108" 3 7/16" 8 5/8" 8" 5"

10" 3 7/16" 8 5/8" 8" 5"

K3117SL - 12 to 1412" 3 7/8" 10 15/16" 8" 6"

14" 3 7/8" 10 15/16" 8" 6"

K3117SL - 16 to 20

16" 4 1/4" 12 3/8" 10" 6 1/2"

18" 4 1/4" 12 3/8" 10" 6 1/2"

20" 4 1/4" 12 3/8" 10" 6 1/2"

K3117SL - 24 24" 4 3/8" 13 1/2" 10" 6 1/2"

K3117SL - 30 30" 5 1/8" 17" 10 3/4" 8"

K3117SL - 36 to 4236" 5 3/4" 20" 12" 9"

42" 5 3/4" 20" 12" 9"

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dipgalvanized sockets and stainless steel hardware are available for most sizes

103

Steel Roller Stand (cont.)

Part Number "E"Diameter

"F"Diameter

"G" "H" "J"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3117SL - 2 to 3 1/2

3 11/16" 1/2" 1" 3 7/16" 6 3/8" 390 508

3 15/16" 1/2" 1" 3 7/16" 6 3/8" 390 508

4 1/4" 1/2" 1" 3 7/16" 6 3/8" 390 508

4 1/2" 1/2" 1" 3 7/16" 6 3/8" 390 508

K3117SL - 4 to 6

5" 1/2" 1" 4 11/16" 7 7/8" 950 631

5 9/16" 1/2" 1" 4 11/16" 7 7/8" 950 631

6 1/16" 1/2" 1" 4 11/16" 7 7/8" 950 631

K3117SL - 8 to 108 13/16" 5/8" 1" 7" 4" 2100 1271

9 7/8" 5/8" 1" 7" 4" 2100 1271

K3117SL - 12 to 1411 7/16" 3/4" 1" 9 1/16" 5 3/4" 3075 1994

12 1/16" 3/4" 1" 9 1/16" 5 3/4" 3075 1994

K3117SL - 16 to 20

13 5/8" 13/16" 1" 10 1/4" 6 3/4" 4980 3423

14 11/16" 13/16" 1" 10 1/4" 6 3/4" 4980 3423

15 11/16" 13/16" 1" 10 1/4" 6 3/4" 4980 3423

K3117SL - 24 17 11/16" 13/16" 1" 11 3/8" 7 1/2" 6100 4710

K3117SL - 30 21 3/4" 1 1/16" 1" 14 1/4" 10" 7500 7132

K3117SL - 36 to 4225 5/16" 1 3/16" 1" 17" 12" 12000 10386

28 5/16" 1 3/16" 1" 17" 12" 12000 10386

Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe with longitudinal movement.When used with insulated pipe, see K3160 - K3165 Pipe CoveringProtection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish

104

Adjustable Roller with Base Plate - K3118SL...

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dip gal-vanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications

Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longitudinal movement and verticaladjustments are required. When used with insulated pipe, see K3160 - K3165Pipe Covering Protection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish

105

Part Number Nominal Pipe Size "A" "B"

K3118SL - 2 to 3 1/2

2" 6 7/8" 6"

2 1/2" 6 7/8" 6"

3" 6 7/8" 6"

3 1/2" 6 7/8" 6"

K3118SL - 4 to 6

4" 8 1/8" 6"

5" 8 1/8" 6"

6" 8 1/8" 6"

K3118SL - 8 to 108" 10 5/8" 8"

10" 10 5/8" 8"

K3118SL - 12 to 1412" 13" 8"

14" 13" 8"

K3118SL - 16 to 20

16" 14 5/8" 10"

18" 14 5/8" 10"

20" 14 5/8" 10"

K3118SL - 24 24" 15 3/4" 10"

K3118SL - 30 30" 19 1/4" 10 1/2"

Part Number"C"

Minimum"C"

Maximum "D" "E" "F"Design Load

(Lbs.)Wt./C(Lbs.)

K3118SL - 2 to 3 1/2

4 3/4" 5 5/8" 3 7/8" 1" 1" 390 1100

5" 5 7/8" 3 7/8" 1" 1" 390 1100

5 5/16" 6 3/16" 3 7/8" 1" 1" 390 1100

5 9/16" 6 7/16" 3 7/8" 1" 1" 390 1100

K3118SL - 4 to 6

6 3/16" 7 7/16" 5 1/8" 1" 1" 950 1310

6 3/4" 8" 5 1/8" 1" 1" 950 1310

7 1/4" 8 1/2" 5 1/8" 1" 1" 950 1310

K3118SL - 8 to 1010 1/8" 11 11/16" 7 3/8" 1" 1 1/8" 2100 2725

11 3/16" 12 3/4" 7 3/8" 1" 1 1/8" 2100 2725

K3118SL - 12 to 1412 3/4" 14 1/8" 9 1/2" 1" 1 1/8" 3075 3612

13 3/8" 14 3/8" 9 1/2" 1" 1 1/8" 3075 3612

K3118SL - 16 to 20

15 3/8" 17 1/4" 11 1/8" 1" 1 1/4" 4980 6384

16 3/8" 18 1/4" 11 1/8" 1" 1 1/4" 4980 6384

17 3/8" 19 1/4" 11 1/8" 1" 1 1/4" 4980 6384

K3118SL - 24 19 1/4" 21 1/4" 12 1/4" 1" 1 3/8" 6100 8437

K3118SL - 30 24 7/16" 26 11/16" 15 3/4" 1" 1 5/8" 7500 12528

Adjustable Roller with Base Plate - K3118SL (cont.)

106


Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe with longitudinal movement. Whenused with insulated pipe, see K3160 - K3165 Pipe Covering Protection Sad-dle charts for proper sizing on pages 66-73Ordering: Specify part number and finish

Steel Roller Stand - K3119SL...

107

Steel Roller Stand - K3119SL (cont.)


StructuralChannel Size "A" "B"

K3119SL - 2 to 3 1/2

2" C4 x 5.4 4 3/4" 3 1/16"

2 1/2" C4 x 5.4 4 3/4" 3 5/16"

3" C4 x 5.4 4 3/4" 3 5/8"

3 1/2" C4 x 5.4 4 3/4" 3 7/8"

K3119SL - 4 to 6

4" C5 x 6.7 5 3/4" 4 1/8"

5" C5 x 6.7 5 3/4" 4 11/16"

6" C5 x 6.7 5 3/4" 5 3/16"

K3119SL - 8 to 108" C6 x 8.2 8" 7 3/16"

10" C6 x 8.2 8" 8 1/4"

K3119SL - 12 to 1412" C8 x 11.5 10" 9 13/16"

14" C8 x 11.5 10" 10 7/16"

K3119SL - 16 to 20

16" C8 x 11.5 11" 11 7/8"

18" C8 x 11.5 11" 12 15/16"

20" C8 x 11.5 11" 13 15/16"

K3119SL - 24 24" C8 x 11.5 12" 15 13/16"

K3119SL - 30 30" C10 x 15.3 14 1/2" 19 5/8"

Part Number "C" "D" "E" "F"Diameter

"G"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3119SL - 2 to 3 1/2

1 15/16" 2 3/4" - 1 3/4" 9/16" 390 314

2 3/16" 2 3/4" - 1 3/4" 9/16" 390 314

2 1/2" 2 3/4" - 1 3/4" 9/16" 390 314

2 3/4" 2 3/4" - 1 3/4" 9/16" 390 314

K3119SL - 4 to 6

2 15/16" 3 3/4" - 2 1/2" 11/16" 950 489

3 1/2" 3 3/4" - 2 1/2" 11/16" 950 489

4" 3 3/4" - 2 1/2" 11/16" 950 489

K3119SL - 8 to 105 3/8" 6" 3" 2 1/2" 13/16" 2100 950

6 7/16" 6" 3" 2 1/2" 13/16" 2100 950

K3119SL - 12 to 147 9/16" 8" 4" 3 5/8" 13/16" 3075 1740

8 3/16" 8" 4" 3 5/8" 13/16" 3075 1740

K3119SL - 16 to 20

9 3/8" 9" 4" 3 1/8" 13/16" 4980 2018

10 7/16" 9" 4" 3 1/8" 13/16" 4980 2018

11 7/16" 9" 4" 3 1/8" 13/16" 4980 2018

K3119SL - 24 13 5/16" 10" 4" 3 1/8" 13/16" 6100 2175

K3119SL - 30 16 5/8" 12 1/2" 6" 4 1/8" 13/16" 7500 3510

108

Roller Chair - K3120


Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support ofpipe with longitudinal movement.When used with insulated pipe, seeK3160 - K3165 Pipe Covering Pro-tection Saddle charts for propersizing on pages 66-73Ordering: Specify part number andfinish

Part NumberNominalPipe Size "A" "B" "C"

Recommended BoltSize (Not Included)

"D" "E"

DesignLoad(Lbs.)

Wt./C(Lbs.)

K3120 - 2 2" 1 1/4" 4 5/8" 1 1/2" 3/8" - 16 x 1 1/2" 1 9/16" 300 119

K3120 - 2 1/2 2 1/2" 1 1/4" 5 3/8" 1 5/8" 3/8" - 16 x 1 1/2" 1 7/8" 600 146

K3120 - 3 3" 2" 6" 1 3/4" 3/8" - 16 x 1 1/2" 2 3/16" 600 172

K3120 - 3 1/2 3 1/2" 2" 6 3/4" 2 1/16" 3/8" - 16 x 1 1/2" 2 1/2" 600 264

K3120 - 4 4" 2" 7 1/4" 2 5/16" 1/2" - 13 x 1 1/2" 2 3/4" 700 303

K3120 - 5 5" 3" 8 7/16" 2 1/2" 1/2" - 13 x 1 1/2" 3 3/8" 700 401

K3120 - 6 6" 3 1/8" 9 3/4" 2 3/4" 1/2" - 13 x 1 1/2" 3 15/16" 1000 620

K3120 - 8 8" 3 3/8" 12" 3" 5/8" - 11 x 1 1/2" 5 1/16" 1300 874

K3120 - 10 10" 5 1/4" 14 7/16" 3 5/8" 5/8" - 11 x 2" 6 1/4" 1700 1270

K3120 - 12 12" 5 1/2" 16 5/8" 4 1/8" 5/8" - 11 x 2" 7 3/8" 2300 1918

K3120 - 14 14" 6" 18 1/4" 4 5/8" 5/8" - 11 x 2" 8 1/4" 3100 2629

K3120 - 16 16" 8" 21" 5" 5/8" - 11 x 2 1/2" 9 1/4" 3900 3248

K3120 - 18 18" 9" 23" 5 1/4" 5/8" - 11 x 2 1/2" 10 3/8" 4200 4120

K3120 - 20 20" 10" 25" 5 3/4" 3/4" - 10 x 3" 11 1/2" 4500 5630

K3120 - 24 24" 12" 30" 7" 3/4" - 10 x 3" 13 3/4" 6000 7702

109

Adjustable Roller Support - K3122



DesignLoad(Lbs.)

Wt./C(Lbs.)

K3122 - 2 2" 3/8" - 16 12" 4 1/8" 2 5/8" 1 9/16" 3/4" 600 194

K3122 - 2 1/2 2 1/2" 1/2" - 13 12" 4 7/8" 3 1/8" 1 7/8" 3/4" 660 284

K3122 - 3 3" 1/2" - 13 12" 5 1/2" 3 3/4" 2 3/16" 3/4" 700 302

K3122 - 3 1/2 3 1/2" 1/2" - 13 12" 6 1/8" 4 1/4" 2 1/2" 3/4" 750 314

K3122 - 4 4" 5/8" - 11 12" 6 3/4" 4 3/4" 2 3/4" 3/4" 750 438

K3122 - 5 5" 5/8" - 11 12" 8 1/16" 5 13/16" 3 3/8" 3/4" 750 495

K3122 - 6 6" 3/4" - 10 12" 9 9/16" 6 7/8" 3 15/16" 1 1/8" 1070 867

K3122 - 8 8" 7/8" - 9 12" 11 15/16" 8 7/8" 5 1/16" 1 1/8" 1350 1176

K3122 - 10 10" 7/8" - 9 12" 14 1/16" 11" 6 1/4" 1 1/8" 1730 1368

K3122 - 12 12" 7/8" - 9 12" 15 13/16" 13" 7 3/8" 1 1/8" 2400 1861

K3122 - 14 14" 1" - 8 12" 17 3/4" 14 1/4" 8 1/4" 1 1/2" 3130 3116

K3122 - 16 16" 1" - 8 18" 19 3/4" 16 1/4" 9 7/16" 1 1/2" 3970 3550

K3122 - 18 18" 1" - 8 18" 21 7/8" 18 1/4" 10 1/2" 1 1/2" 4200 4328

K3122 - 20 20" 1 1/4" - 7 18" 24 1/4" 20 1/4" 11 1/2" 1 1/2" 4550 5241

K3122 - 24 24" 1 1/2" - 6 24" 28 7/8" 24 1/4" 13 13/16" 2" 6160 7773


Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longi-tudinal movement and vertical adjustments are re-quired. When used with insulated pipe, see K3160 -K3165 Pipe Covering Protection Saddle charts forproper sizing on pages 66-73Ordering: Specify part number and finish

110

Adjustable Double Roller Guide - K3122A



DesignLoad(Lbs.)

Wt./C(Lbs.)

K3122A - 2 2" 3/8" - 16 12" 4 1/8" 2 5/8" 1 9/16" 3/4" 600 323

K3122A - 2 1/2 2 1/2" 1/2" - 13 14" 4 7/8" 3 1/8" 1 7/8" 3/4" 660 465

K3122A - 3 3" 1/2" - 13 14" 5 1/2" 3 3/4" 2 3/16" 3/4" 700 501

K3122A - 3 1/2 3 1/2" 1/2" - 13 14" 6 1/8" 4 1/4" 2 1/2" 3/4" 750 525

K3122A - 4 4" 5/8" - 11 18" 6 3/4" 4 3/4" 2 3/4" 3/4" 750 757

K3122A - 5 5" 5/8" - 11 18" 8 1/16" 5 13/16" 3 3/8" 3/4" 750 872

K3122A - 6 6" 3/4" - 10 24" 9 9/16" 6 7/8" 3 15/16" 1 1/8" 1070 1687

K3122A - 8 8" 7/8" - 9 24" 11 15/16" 8 7/8" 5 1/16" 1 1/8" 1350 2277

K3122A - 10 10" 7/8" - 9 30" 14 1/16" 11" 6 1/4" 1 1/8" 1730 2830

K3122A - 12 12" 7/8" - 9 30" 15 13/16" 13" 7 3/8" 1 1/8" 2400 3817

K3122A - 14 14" 1" - 8 36" 17 3/4" 14 1/4" 8 1/4" 1 1/2" 3130 6513

K3122A - 16 16" 1" - 8 36" 19 3/4" 16 1/4" 9 7/16" 1 1/2" 3970 6759

K3122A - 18 18" 1" - 8 42" 21 7/8" 18 1/4" 10 1/2" 1 1/2" 4200 7518

K3122A - 20 20" 1 1/4" - 7 42" 24 1/4" 20 1/4" 11 1/2" 1 1/2" 4550 11222

K3122A - 24 24" 1 1/2" - 6 48" 28 7/8" 24 1/4" 13 13/16" 2" 6160 17666


Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longi-tudinal movement and vertical adjustments are re-quired. When used with insulated pipe, see K3160 -K3165 Pipe Covering Protection Saddle charts forproper sizing on pages 66-73Ordering: Specify part number and finish

111

Roller Support - K3124

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dipgalvanized sockets and stainless steel hardware are available for most sizes. Not for con-tinuous cycling applications

Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed for support of pipe where longitudinalmovement and vertical adjustments are required. Whenused with insulated pipe, see K3160 - K3165 Pipe CoveringProtection Saddle charts for proper sizing on pages 66-73Ordering: Specify part number and finish

Part NumberNominalPipe Size "A" "B" "C" "D" "E"

Length ofRoller

DesignLoad (Lbs.)

Wt./C(Lbs.)

K3124 - 2 to 3 1/2

2" 5/8" - 11 4 3/4" 1 3/4" 5" 1 13/16" 2 3/4" 390 233

2 1/2" 5/8" - 11 4 3/4" 2 1/8" 5" 1 13/16" 2 3/4" 390 233

3" 5/8" - 11 4 3/4" 2 3/8" 5" 1 13/16" 2 3/4" 390 233

3 1/2" 5/8" - 11 4 3/4" 2 5/8" 5" 1 13/16" 2 3/4" 390 233

K3124 - 4 to 6

4" 3/4" - 10 5 7/8" 2 3/4" 6" 2" 3 3/4" 600 368

5" 3/4" - 10 5 7/8" 3 3/8" 6" 2" 3 3/4" 600 368

6" 3/4" - 10 5 7/8" 4" 6" 2" 3 3/4" 600 368

K3124 - 8 to 108" 7/8" - 9 8 3/4" 5 1/4" 6" 2 11/16" 6" 800 919

10" 7/8" - 9 8 3/4" 6 3/8" 6" 2 11/16" 6" 800 919

K3124 - 12 to 1412" 1" - 8 11 1/4" 7 1/2" 7" 3 1/4" 8" 1300 1660

14" 1" - 8 11 1/4" 8 1/8" 7" 3 1/4" 8" 1300 1660

K3124 - 16 to 20

16" 1 1/8" - 7 12 1/2" 9 3/8" 8" 3 1/2" 9" 2300 2250

18" 1 1/8" - 7 12 1/2" 10 3/8" 8" 3 1/2" 9" 2300 2250

20" 1 1/8" - 7 12 1/2" 11 3/8" 8" 3 1/2" 9" 2300 2250

112

Roller Support - K3126

Notes: If using D.I. pipe refer to page 180 for sizing. Non-metallic rollers with hot-dipgalvanized sockets and stainless steel hardware are available for most sizes. Not forcontinuous cycling applications

Material: Steel with cast iron rollerStandard Finish: Plain or Electro-PlatedService: Designed to mount on strut (metalframing) for the support of pipe with longi-tudinal movement. When used with insu-lated pipe, see K3160 - K3165 Pipe CoveringProtection Saddle charts for proper sizingon pages 66-73Ordering: Specify part number and finish

Part NumberNominalPipe Size "A" "B" "C" "D" "E"

Design Load(Lbs.)

Wt./C(Lbs.)

K3126 - 2 to 3 1/2

2" 1 7/16" 6" 3 11/16" 7 5/8" 9/16" 390 177

2 1/2" 1 7/16" 6" 3 27/64" 7 5/8" 9/16" 390 177

3" 1 7/16" 6" 3 47/64" 7 5/8" 9/16" 390 177

3 1/2" 1 7/16" 6" 3 63/64" 7 5/8" 9/16" 390 177

K3126 - 4 to 6

4" 1 7/16" 7" 4 13/64" 8 5/8" 9/16" 600 231

5" 1 7/16" 7" 4 47/64" 8 5/8" 9/16" 600 231

6" 1 7/16" 7" 5 17/64" 8 5/8" 9/16" 600 231

K3126 - 8 to 108" 1 13/16" 8 3/4" 7" 10 3/8" 9/16" 800 542

10" 1 13/16" 8 3/4" 8 1/16" 10 3/8" 9/16" 800 542

K3126 - 12 to 1412" 2 7/16" 12 1/8" 9 27/32" 14 3/8" 13/16" 1300 1040

14" 2 7/16" 12 1/8" 10 15/32" 14 3/8" 13/16" 1300 1040

K3126 - 16 to 20

16" 2 5/8" 13 1/8" 11 7/8" 15 3/8" 13/16" 2300 1508

18" 2 5/8" 13 1/8" 12 7/8" 15 3/8" 13/16" 2300 1508

20" 2 5/8" 13 1/8" 13 7/8" 15 3/8" 13/16" 2300 1508

113

Spring Cushion Hanger - K3264

Part NumberRod Size

"A"Free Height

"C" "D"Spring Deflection Per

Spring (Lbs./in.)

Maximum Load at1" Deflection - 2

Springs (Lbs.)Wt./CPR

(Lbs.)

K3264 - 1 3/8" - 16 3" 1 1/16" 30 78 100

K3264 - 5 3/4" - 10 4 5/8" 2 5/16" 707 1500 400

K3264 - 6 1" - 8 4 7/8" 3 1/4" 1600 3200 700

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for use with K3114 as a cushionspring for a piping system where vertical movementdoes not exceed 1 1/4”Ordering: Specify part number, size and finish

Note: Includes 2 springs and 4 cup washers

Pipe supports presented in this section are designed to support pipe from a basestructure where vertical adjustments may be necessary. Pipe guides and slides aredesigned to allow longitudinal movement due to thermal expansion and contractionof pipe. Protection shields and saddles are designed to prevent damage to pipe in-sulation.Materials: Carbon Steel is used in the manufacturing of pipe supports, guides,shields and saddles. Stainless Steel and other materials are also available.Finishes: Finishes for pipe supports in this section are Plain Steel, Electro-PlatedZinc, Hot Dipped Galvanized, Red Primer and other special coatings are also avail-able.Notes: All hangers in this section are sized to fit schedule 40/80 pipe unless other-wise noted. Some steel items may be specially fabricated to accommodate otherpipe diameters. Products in this section are designed and manufactured in accor-dance with industry standards. RHK is not responsible for injuries and damagewhich could result from improper and negligent installation of the items.

Supports, Guides,Shields andSaddles

51

Base Stand - K3088

Part Number Stand Pipe Size Plate Size "A" Diameter "H" Wt./C* (Lbs.)

K3088 - 3/4 3/4" 1/4" x 6" x 6" 7/8" 3/4" 420

K3088 - 1 1" 1/4" x 6" x 6" 7/8" 3/4" 480

K3088 - 1 1/4 1 1/4" 1/4" x 6" x 6" 7/8" 3/4" 590

K3088 - 1 1/2 1 1/2" 1/4" x 6" x 6" 7/8" 3/4" 655

K3088 - 2 2" 1/4" x 6" x 6" 7/8" 3/4" 1211

K3088 - 2 1/2 2 1/2" 3/8" x 8" x 8" 1 1/4" 13/16" 2376

K3088 - 3/4 3" 3/8" x 12" x 12" 1 1/2" 13/16" 3137

K3088 - 4 4" 1/2" x 12" x 12" 1 1/2" 15/16" 4338

K3088 - 6 6" 1/2" x 18" x 18" 1 1/2" 1 1/8" 7378

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed as an unthreaded base stand for Pipe Sup-ports K3090, K3095, K3094 and K3096Ordering: Specify part number, height and finish

Note: Match K3088 part number with dimension “D” from K3090, K3095 or K3096 charts

52

Seismic Base Stand - K3088S

Part NumberStand Pipe

Size Plate Size "A"Diameter

"H"Wt./C*(Lbs.)

K3088S - 3/4 3/4" 1/4" x 8" x 8" 1" 9/16" 618

K3088S - 1 1" 1/4" x 8" x 8" 1" 9/16" 708

K3088S - 1 1/4 1 1/4" 1/4" x 8" x 8" 1" 9/16" 798

K3088S - 1 1/2 1 1/2" 1/4" x 8" x 8" 1" 9/16" 858

K3088S - 2 2" 1/4" x 8" x 8" 1" 9/16" 993

K3088S - 2 1/2 2 1/2" 3/8" x 8 1/2" x 8 1/2" 1 1/4" 9/16" 1638

K3088S - 4 4" 1/2" x 13 1/2" x 13 1/2" 1 1/2" 15/16" 4202

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed as an unthreaded base stand for Pipe Supports K3090, K3095,K3094 and K3096. Designed to meet requirements of 12X anchor diameter holespacing for seismic applications. The standard K3088-3 and K3088-6 alreadymeet this requirementOrdering: Specify part number, height and finish

Note: Match K3088 part number with dimension “D” from K3090, K3095 or K3096 charts.Wt./C* based on a height of 18”

53

Threaded Seismic Base Stand - K3088ST



"H" "TL"Wt./C*(Lbs.)

K3088ST - 1 1" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 708

K3088ST - 1 1/4 1 1/4" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 798

K3088ST - 1 1/2 1 1/2" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 858

K3088ST - 2 2" 1/4" x 8" x 8" 1" 9/16" 1 1/2" 993

K3088ST - 2 1/2 2 1/2" 3/8" x 8 1/2" x 8 1/2" 1 1/4" 9/16" 1 1/2" 1638

K3088ST - 4 4" 1/2" x 13 1/2" x 13 1/2" 1 1/2" 15/16" 2" 4202

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed as a threaded base stand for Pipe Supports K3089, K3091, K3092,K3093 and K3097. Designed to meet requirements of 12X anchor diameter holespacing for seismic applications. The standard K3088T-3 and K3088T-6 alreadymeet this requirementOrdering: Specify part number, height and finish

Note: Match K3088T part number with dimension “D” from K3089, K3092 and K3093 charts.Wt./C* based on a height of 18”

54

Threaded Base Stand - K3088T



"H" "TL"Wt./C*(Lbs.)

K3088T - 1 1" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 495

K3088T - 1 1/4 1 1/4" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 583

K3088T - 1 1/2 1 1/2" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 649

K3088T - 2 2" 1/4" x 6" x 6" 7/8" 3/4" 1 1/2" 785

K3088T - 2 1/2 2 1/2" 3/8" x 8" x 8" 1 1/4" 13/16" 1 1/2" 1524

K3088T - 3 3" 3/8" x 12" x 12" 1 1/2" 13/16" 1 1/2" 2624

K3088T - 4 4" 1/2" x 12" x 12" 1 1/2" 15/16" 2" 3594

K3088T - 6 6" 1/2" x 18" x 18" 1 1/2" 1 1/8" 2" 7346

Materials: SteelStandard Finish: Plain or Electro-PlatedService: Designed as a threaded base stand for Pipe Supports K3089,K3091, K3092, K3093 and K3097Ordering: Specify part number, height and finish

Note: Match K3088T part number with dimension “D” from K3089, K3092 and K3093charts. Wt./C* based on a height of 18”

55

Pipe Adjuster - K3089

Part Number

To SupportNominalPipe Size "B"

"C" WhenUsed with

K3090Minumum

"C" WhenUsed with

K3090Maximum

"C" WhenUsed with

K3095Minimum

"C" WhenUsed with

K3095Maximum

"D" (NotSupplied)

Wt./C(Lbs.)

K3089 - 3/41 1/2"

3/4"6 1/4" 10 3/4" 6" 10 1/2"

1 1/2" 1402" 6 7/16" 10 15/16" 6 3/16" 10 11/16"

K3089 - 1 1/2

2 1/2"

1 1/2"

8 3/8" 12 7/8" 7 15/16" 12 7/16"

2 1/2" 4003" 8 11/16" 13 3/16" 8 1/8" 12 5/8"

3 1/2" 8 15/16" 13 7/16" 8 3/8" 12 7/8"

K3089 - 2 1/2

4"

2 1/2"

9 15/16" 14 7/16" 9 7/16" 13 15/16"

3" 700

5" 10 1/4" 14 3/4" 9 3/4" 14 1/4"

6" 11 3/16" 15 11/16" 10 7/16" 14 15/16"

8" 12 11/16" 17 3/16" 12 3/8" 16 7/8"

10" 13 11/16" 18 3/16" 13 7/16" 17 15/16"

12" 14 7/8" 19 3/8" 14 7/16" 18 15/16"

K3089 - 314"

3"18" 22 1/2" 18 3/16" 22 11/16"

4" 100016" 19" 23 1/2" 19 3/16" 23 11/16"

K3089 - 4

18"

4"

21 9/16" 26 1/16" 21 1/2" 26"

6" 2200

20" 22 9/16" 27 1/16" 22 1/2" 27"

24" 24 9/16" 29 1/16" 25 3/4" 30 1/4"

30" 28 11/16" 33 3/16" 28 7/8" 33 3/8"

36" 31 11/16" 36 3/16" 31 7/8" 36 3/8"

Material: Steel Pipe/MalleableIron ReducerStandard Finish: Plain or Electro-PlatedService: Designed to provide upto 4 1/2” vertical adjustmentafter pipe installation. For usewith K3090, K3094 and K3095Pipe Saddle Supports andK3088T or K3088ST ThreadedBase StandsOrdering: Specify part numberand finish

56

Pipe Support with U-Bolt - K3090


MaximumO.D. of

Pipe Steel Size "A" "B" "C"

"D" (BaseStand NotIncluded)

Wt./C(Lbs.)

K3090 - 3/4 3/4" 1 3/8" 1/4" x 1 1/2" 1/4" 3/4" 2" 3/4" 107

K3090 - 1 1" 1 3/8" 1/4" x 1 1/2" 1/4" 3/4" 2 5/32" 3/4" 117

K3090 - 1 1/4 1 1/4" 1 11/16" 1/4" x 2" 3/8" 3/4" 2 21/64" 3/4" 149

K3090 - 1 1/2 1 1/2" 2" 1/4" x 2" 3/8" 3/4" 2 1/2" 3/4" 166

K3090 - 2 2" 2 7/16" 1/4" x 2" 3/8" 3/4" 2 11/16" 3/4" 186

K3090 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 1/2" 1 5/16" 3 1/8" 1 1/2" 251

K3090 - 3 3" 3 1/2" 1/4" x 3" 1/2" 1 5/16" 3 7/16" 1 1/2" 316

K3090 - 3 1/2 3 1/2" 4" 1/4" x 3" 1/2" 1 5/16" 3 11/16" 1 1/2" 317

K3090 - 4 4" 4 7/8" 3/8" x 3 1/2" 1/2" 2 3/8" 4 1/16" 2 1/2" 586

K3090 - 5 5" 5 5/8" 3/8" x 3 1/2" 1/2" 2 3/8" 4 17/32" 2 1/2" 621

K3090 - 6 6" 6 29/32" 1/2" x 3 1/2" 5/8" 2 3/8" 5 5/16" 2 1/2" 895

K3090 - 8 8" 9 1/8" 1/2" x 3 1/2" 5/8" 2 3/8" 6 3/4" 2 1/2" 1115

K3090 - 10 10" 11 3/32" 1/2" x 3 1/2" 3/4" 2 3/8" 7 13/16" 2 1/2" 1423

K3090 - 12 12" 13 3/16" 1/2" x 3 1/2" 7/8" 2 3/8" 8 13/16" 2 1/2" 1846

K3090 - 14 14" 14" 5/8" x 4" 7/8" 2 7/8" 10 9/16" 3" 2593

K3090 - 16 16" 16" 5/8" x 4" 7/8" 2 7/8" 11 9/16" 3" 2825

K3090 - 18 18" 18" 3/4" x 5" 1" 2 7/8" 13 9/16" 4" 4843

K3090 - 20 20" 20" 3/4" x 5" 1" 4" 14 9/16" 4" 5225

K3090 - 24 24" 24" 1" x 5" 1" 4" 16 9/16" 4" 6970

K3090 - 30 30" 30" 1" x 5" 1" 4" 20 11/16" 4" 8587

K3090 - 36 36" 36" 1" x 5" 1" 4" 23 11/16" 4" 9977

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support ofhorizontal pipe from floor. U-Boltand Hex Nuts are provided to holdpipe securely to the saddle. Usewith K3088 or K3088S Base StandsOrdering: Specify part numberand finish

Note: 4” to 12” fits both steel and ductile iron pipe. For other ductile iron pipe sizesspecify K3090DI-Size. 3” Ductile iron uses K3090-3 1/2

K3090 - 8 or larger

57

Pipe Saddle Support - K3091


MaximumO.D. of Pipe "A" Steel Size

Nominal PipeCoupling "D" Wt./C (Lbs.)

K3091 - 3/4 3/4" 1 1/8" 2 23/32" 7 Ga x 1 3/4" 1" 51

K3091 - 1 1" 1 3/8" 2 27/32" 7 Ga x 1 3/4" 1" 53

K3091 - 1 1/4 1 1/4" 1 11/16" 3 1/64" 7 Ga x 1 3/4" 1" 56

K3091 - 1 1/2 1 1/2" 2" 3 1/4" 1/4" x 2" 1 1/4" 84

K3091 - 2 2" 2 3/8" 3 5/8" 3/8" x 2" 1 1/4" 112

K3091 - 2 1/2 2 1/2" 2 7/8" 3 7/8" 3/8" x 2 1/2" 1 1/2" 162

K3091 - 3 3" 3 1/2" 4 3/16" 3/8" x 2 1/2" 1 1/2" 179

K3091 - 3 1/2 3 1/2" 4" 4 7/16" 3/8" x 2 1/2" 1 1/2" 193

K3091 - 4 4" 4 13/16" 4 3/4" 3/8" x 3" 2" 273

K3091 - 5 5" 5 9/16" 5 9/32" 3/8" x 3" 2" 309

K3091 - 6 6" 6 29/32" 6 15/16" 1/2" x 3 1/2" 2 1/2" 586

K3091 - 8 8" 9 1/16" 7 15/16" 1/2" x 3 1/2" 2 1/2" 688

K3091 - 10 10" 11 1/8" 9 1/8" 1/2" x 4" 3" 1011

K3091 - 12 12" 13 1/4" 10 1/8" 1/2" x 4" 3" 1128

K3091 - 14 14" 14" 11" 1/2" x 5" 4" 1532

K3091 - 16 16" 16" 12" 1/2" x 5" 4" 1680

K3091 - 18 18" 18" 13 1/2" 1/2" x 7 1/2" 6" 3179

K3091 - 20 20" 20" 14 1/2" 1/2" x 7 1/2" 6" 3401

K3091 - 24 24" 24" 16 1/2" 1/2" x 7 1/2" 6" 3846

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizon-tal pipe from floor where there is mini-mal space between pipe and floor. Usewith K3088T Threaded Base StandOrdering: Specify part number and finish

Notes: 4” thru 12” fits both steel and ductile iron pipe. For other ductile iron pipe sizesspecify K3091DI-size. 3” Ductile Iron uses K3091-3 1/2

58

Adj. Pipe Saddle Support w/Yoke - K3092...


Maximum O.D. ofPipe Saddle Steel Size "A" "B" Minimum

K3092 - 3/4 3/4" 1 3/8" 1/4" x 1 1/2" 3/4" 5 3/4"

K3092 - 1 1" 1 3/8" 1/4" x 1 1/2" 3/4" 5 29/32"

K3092 - 1 1/4 1 1/4" 1 11/16" 1/4" x 2" 3/4" 6 5/64"

K3092 - 1 1/2 1 1/2" 2" 1/4" x 2" 3/4" 6 1/4"

K3092 - 2 2" 2 7/16" 1/4" x 2" 3/4" 6 7/16"

K3092 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 1 1/2" 6 7/8"

K3092 - 3 3" 3 1/2" 1/4" x 3" 1 1/2" 7 3/16"

K3092 - 3 1/2 3 1/2" 4" 1/4" x 3" 1 1/2" 7 7/16"

K3092 - 4 4" 4 7/8" 3/8" x 3 1/2" 2 1/2" 7 13/16"

K3092 - 5 5" 5 5/8" 3/8" x 3 1/2" 2 1/2" 8 9/32"

K3092 - 6 6" 6 29/32" 1/2" x 3 1/2" 2 1/2" 9 1/16"

K3092 - 8 8" 9 1/8" 1/2" x 3 1/2" 2 1/2" 10 1/2"

K3092 - 10 10" 11 3/32" 1/2" x 3 1/2" 2 1/2" 11 9/16"

K3092 - 12 12" 13 3/16" 1/2" x 3 1/2" 2 1/2" 12 9/16"

K3092 - 14 14" 14" 5/8" x 4" 3" 14 5/16"

K3092 - 16 16" 16" 5/8" x 4" 3" 15 5/16"

K3092 - 18 18" 18" 3/4" x 5" 4" 17 5/16"

K3092 - 20 20" 20" 3/4" x 5" 4" 18 5/16"

K3092 - 24 24" 24" 1" x 5" 4" 20 5/16"

K3092 - 30 30" 30" 1" x 5" 4" 24 7/16"

K3092 - 36 36" 36" 1" x 5" 4" 27 7/16"

Note: 4” to 12” fits both steel and ductile iron pipe. For other ductile iron pipesizes specify K3090DI-size. 3” Ductile iron uses K3090-3 1/2

59

Adj. Pipe Saddle Support w/Yoke - K3092 (cont.)

Part Number "B" Maximum "C""D" (Base Stand

Not Supplied) "E" Wt./C (Lbs.)

K3092 - 3/4 10 1/4" 2" 1 1/2" 1/4" 247

K3092 - 1 10 13/32" 2 5/32" 1 1/2" 1/4" 257

K3092 - 1 1/4 10 37/64" 2 21/64" 1 1/2" 3/8" 289

K3092 - 1 1/2 10 3/4" 2 1/2" 1 1/2" 3/8" 306

K3092 - 2 10 15/16" 2 11/16" 1 1/2" 3/8" 326

K3092 - 2 1/2 11 3/8" 3 1/8" 2 1/2" 1/2" 651

K3092 - 3 11 11/16" 3 7/16" 2 1/2" 1/2" 716

K3092 - 3 1/2 11 15/16" 3 11/16" 2 1/2" 1/2" 717

K3092 - 4 12 5/16" 4 1/4" 3" 1/2" 1286

K3092 - 5 12 25/32" 4 9/16" 3" 1/2" 1321

K3092 - 6 13 9/16" 5 1/2" 3" 5/8" 1595

K3092 - 8 15" 7" 3" 5/8" 1815

K3092 - 10 16 1/16" 8" 3" 3/4" 2123

K3092 - 12 17 1/16" 9 3/16" 3" 7/8" 2546

K3092 - 14 18 13/16" 10 9/16" 4" 7/8" 3593

K3092 - 16 19 13/16" 11 9/16" 4" 7/8" 3825

K3092 - 18 21 13/16" 13 9/16" 6" 1" 7043

K3092 - 20 22 13/16" 14 9/16" 6" 1" 7425

K3092 - 24 24 13/16" 16 9/16" 6" 1" 9170

K3092 - 30 28 15/16" 20 11/16" 6" 1" 10787

K3092 - 36 31 15/16" 23 11/16" 6" 1" 12177

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizontal pipe fromfloor where vertical adjustment is required. U-Bolt andHex Nuts are provided to hold pipe securely to the sad-dle. Use with K3088T Threaded Base StandOrdering: Specify part number and finish

60

Adj. Pipe Saddle Support w/Reducer - K3093...


SizeMaximum O.D.

of Pipe Saddle Steel Size "A" "B" Minimum

K3093 - 1 1" 1 5/16" 1/4" x 1 3/4" 3/4" 5 21/32"

K3093 - 1 1/4 1 1/4" 1 11/16" 1/4" x 1 3/4" 3/4" 5 53/64"

K3093 - 1 1/2 1 1/2" 1 29/32" 1/4" x 1 3/4" 3/4" 6"

K3093 - 2 2" 2 3/8" 1/4" x 1 3/4" 3/4" 6 3/16"

K3093 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 1 1/2" 6 5/16"

K3093 - 3 3" 3 1/2" 1/4" x 3" 1 1/2" 6 5/8"

K3093 - 3 1/2 3 1/2" 4" 1/4" x 3" 1 1/2" 6 7/8"

K3093 - 4 4" 4 7/8" 1/4" x 4" 2 1/2" 7 1/4"

K3093 - 5 5" 5 9/16" 1/4" x 4" 2 1/2" 7 25/32"

K3093 - 6 6" 7" 3/8" x 4" 2 1/2" 8 7/16"

K3093 - 8 8" 9 1/8" 3/8" x 4" 2 1/2" 10 1/4"

K3093 - 10 10" 11 1/8" 3/8" x 4" 2 1/2" 11 5/16"

K3093 - 12 12" 13 1/2" 3/8" x 4" 2 1/2" 12 1/8"

K3093 - 14 14" 14" 3/8" x 5" 3" 14 1/2"

K3093 - 16 16" 16" 3/8" x 5" 3" 15 1/2"

K3093 - 18 18" 18" 1/2" x 5" 4" 17 1/4"

K3093 - 20 20" 20" 1/2" x 5" 4" 18 1/4"

K3093 - 24 24" 24" 1/2" x 6" 4" 21 1/2"

K3093 - 30 30" 30" 1" x 6" 4" 24 5/8"

K3093 - 36 36" 36" 1" x 6" 4" 27 5/8"

Note: 4” to 12” fits both steel and ductile iron pipe. For other ductileiron pipe sizes specify K3090DI-size. 3” Ductile iron uses K3090-3 1/2

61

Adj. Pipe Saddle Support w/Reducer - K3093 (cont.)

Part Number "B" Maximum "C""D" (Base Stand

Not Included)Wt./C Complete

(Lbs.)Wt./C Saddle

Only (Lbs.)

K3093 - 1 10 5/32" 1 29/32" 1 1/2" 189 49

K3093 - 1 1/4 10 21/64" 2 5/64" 1 1/2" 221 81

K3093 - 1 1/2 10 1/2" 2 1/4" 1 1/2" 228 88

K3093 - 2 10 11/16" 2 7/16" 1 1/2" 234 94

K3093 - 2 1/2 10 13/16" 2 9/16" 2 1/2" 567 167

K3093 - 3 11 1/8" 2 7/8" 2 1/2" 576 176

K3093 - 3 1/2 11 3/8" 3 1/8" 2 1/2" 588 188

K3093 - 4 11 3/4" 3 1/2" 3" 1064 364

K3093 - 5 12 9/32" 4 1/32" 3" 1081 381

K3093 - 6 12 15/16" 4 11/16" 3" 1234 534

K3093 - 8 14 3/4" 6 1/2" 3" 1496 796

K3093 - 10 15 13/16" 7 9/16" 3" 1614 914

K3093 - 12 16 5/8" 8 3/8" 3" 1768 1068

K3093 - 14 19" 10 3/4" 4" 2654 1654

K3093 - 16 20" 11 3/4" 4" 2817 1817

K3093 - 18 21 3/4" 13 1/2" 6" 4998 2798

K3093 - 20 22 3/4" 14 1/2" 6" 5218 3018

K3093 - 24 26" 17 3/4" 6" 6346 4146

K3093 - 30 29 1/8" 20 7/8" 6" 9824 7624

K3093 - 36 32 1/8" 23 7/8" 6" 11077 8877

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizontal pipe fromfloor stanchions where vertical adjustment is required.Use with K3088T Threaded Base StandsOrdering: Specify part number and finish

62

Pipe Saddle Support - K3095


MaximumO.D. of

Pipe Steel Size "A" "B" "C"

"D" (BaseStand NotIncluded) "E"

Wt./C(Lbs.)

K3095 - 1 1" 1 5/16" 1/4" x 1 3/4" 3" 1/2" 1 29/32" 3/4" 1 1/8" 49

K3095 - 1 1/4 1 1/4" 1 11/16" 1/4" x 1 3/4" 3" 3/4" 2 5/64" 3/4" 1 7/16" 81

K3095 - 1 1/2 1 1/2" 1 29/32" 1/4" x 1 3/4" 3" 3/4" 2 1/4" 3/4" 1 21/32" 88

K3095 - 2 2" 2 3/8" 1/4" x 1 3/4" 3" 3/4" 2 7/16" 3/4" 2 1/16" 94

K3095 - 2 1/2 2 1/2" 2 7/8" 1/4" x 3" 4" 1 5/16" 2 9/16" 1 1/2" 2 1/2" 167

K3095 - 3 3" 3 1/2" 1/4" x 3" 4" 1 5/16" 2 7/8" 1 1/2" 3 1/32" 176

K3095 - 3 1/2 3 1/2" 4" 1/4" x 3" 4" 1 5/16" 3 1/8" 1 1/2" 3 7/16" 188

K3095 - 4 4" 4 7/8" 1/4" x 4" 4" 2 3/8" 3 1/2" 2 1/2" 4 1/4" 364

K3095 - 5 5" 5 9/16" 1/4" x 4" 4" 2 3/8" 4 1/32" 2 1/2" 4 13/16" 381

K3095 - 6 6" 7" 3/8" x 4" 4" 2 3/8" 4 11/16" 2 1/2" 6 1/16" 534

K3095 - 8 8" 9 1/8" 3/8" x 4" 4" 2 3/8" 6 1/2" 2 1/2" 7 15/16" 796

K3095 - 10 10" 11 1/8" 3/8" x 4" 4" 2 3/8" 7 9/16" 2 1/2" 9 5/8" 914

K3095 - 12 12" 13 1/2" 3/8" x 4" 4" 2 3/8" 8 3/8" 2 1/2" 11 11/16" 1068

K3095 - 14 14" 14" 3/8" x 5" 4" 2 7/8" 10 3/4" 3" 12 1/8" 1654

K3095 - 16 16" 16" 3/8" x 5" 4" 2 7/8" 11 3/4" 3" 13 7/8" 1817

K3095 - 18 18" 18" 1/2" x 5" 4" 3 1/2" 13 1/2" 4" 15 19/32" 2798

K3095 - 20 20" 20" 1/2" x 5" 4" 3 1/2" 14 1/2" 4" 17 5/16" 3018

K3095 - 24 24" 24" 1/2" x 6" 4" 3 1/2" 17 3/4" 4" 20 25/32" 4146

K3095 - 30 30" 30" 1" x 6" 4" 3 1/2" 20 7/8" 4" 26" 7624

K3095 - 36 36" 36" 1" x 6" 4" 3 1/2" 23 7/8" 4" 31 3/16" 8877

Note: 4” to 12” fits both steel and ductile iron pipe. For other ductile iron pipesizes specify K3090DI-size. 3” Ductile iron uses K3090-3 1/2

Material: SteelStandard Finish: Plain orElectro-PlatedService: Designed for sup-port of horizontal pipe fromfloor. Use with K3088 orK3088S Base StandsOrdering: Specify part num-ber and finish

63

Adjustable Pipe Saddle Support - K3096

Material: SteelStandard Finish: Plain or Electro-PlatedService: Designed for support of horizontal pipe from floor stanchions (K3088 orK3088S) where vertical adjustment is requiredOrdering: Specify part number and finish


MaximumO.D. of Pipe Thread Size "A"

"D" (Base StandNot Included) Wt./C (Lbs.)

K3096 - 2 2" 2 3/8" 7/8" - 9 1" 212

K3096 - 3 3" 3 1/2" 7/8" - 9 1" 259

K3096 - 4 4" 4 1/2" 1" - 8 1" 370

K3096 - 5 5" 5 9/16" 1" - 8 1" 404

K3096 - 6 6" 6 5/8" 1 1/4" - 7 1 1/4" 714

K3096 - 8 8" 8 5/8" 1 1/4" - 7 1 1/4" 819

K3096 - 10 10" 10 3/4" 1 1/2" - 6 1 1/2" 1194

K3096 - 12 12" 12 3/4" 1 1/2" - 6 1 1/2" 1315

64

Pipe Saddle Support with U-Bolt - K3097

Part NumberNominalPipe Size "A" Steel Size Pipe Coupling

U-Bolt ThreadSize Wt./C (Lbs.)

K3097 - 2 1/2 2 1/2" 3 3/4" 1/4" x 3" 1 1/2" 1/2" - 13 303

K3097 - 3 3" 4 1/16" 1/4" x 3" 1 1/2" 1/2" - 13 303

K3097 - 3 1/2 3 1/2" 4 5/16" 1/4" x 3" 1 1/2" 1/2" - 13 351

K3097 - 4 4" 4 3/4" 3/8" x 3 1/2" 2" 1/2" - 13 504

K3097 - 5 5" 5 9/32" 3/8" x 3 1/2" 2" 1/2" - 13 551

K3097 - 6 6" 6 15/16" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 978

K3097 - 8 8" 7 15/16" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 1143

K3097 - 10 10" 9 1/8" 1/2" x 4" 3" 3/4" - 10 1724

K3097 - 12 12" 10 1/8" 1/2" x 4" 3" 7/8" - 9 2156

K3097 - 14 14" 11 1/8" 5/8" x 5" 4" 7/8" - 9 3217

K3097 - 16 16" 12 1/8" 5/8" x 5" 4" 7/8" - 9 3494

K3097 - 18 18" 13 3/4" 3/4" x 7 1/2" 6" 1" - 8 7067

K3097 - 20 20" 14 3/4" 3/4" x 7 1/2" 6" 1" - 8 7399

K3097 - 24 24" 16 3/4" 3/4" x 7 1/2" 6" 1" - 8 8318

Sch 40/80

Ductile Iron

Part NumberDuctile

Iron "A" Steel Size Pipe CouplingU-Bolt Thread

SizeWt./C(Lbs.)

K3097 - 3 1/2 3" 4 19/64" 1/4" x 3" 1 1/2" 1/2" - 13 351

K3097 - 4 4" 4 29/32" 3/8" x 3 1/2" 2" 1/2" - 13 504

K3097 - 6 6" 7 5/64" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 978

K3097 - 8 8" 8 5/32" 1/2" x 3 1/2" 2 1/2" 5/8" - 11 1143

K3097 - 10 10" 9 19/64" 1/2" x 4" 3" 3/4" - 10 1724

K3097 - 12 12" 10 11/32" 1/2" x 4" 3" 7/8" - 9 2156

Material: SteelStandard Finish: Electro-PlatedService: Designed for support ofhorizontal pipe from floor wherethere is minimal space betweenpipe and floor. U-Bolt holds pipesecurity to support. Use withK3088T Threaded Base StandOrdering: Specify part numberand finish

65

Insulation Protection Shield - K3151

Part Number Hanger Size "L"1 "L"2 Shield "I.D."

K3151 - 1 1/2 1 1/2" 10" 12" 1.9

K3151 - 2 2" 10" 12" 2.38

K3151 - 2 1/2 2 1/2" 10" 12" 2.88

K3151 - 3 3" 10" 12" 3.5

K3151 - 3 1/2 3 1/2" 10" 12" 4

K3151 - 4 4" 10" 12" 4.5

K3151 - 5 5" 10" 12" 5.56

K3151 - 6 6" 10" 12" 6.64

K3151 - 8 8" 10" 12" 8.64

K3151 - 10 10" 10" 12" 10.76

K3151 - 12 12" 12" - 12.76

K3151 - 14 14" 12" - 14

K3151 - 16 16" 12" - 16

K3151 - 18 18" 18" - 18

K3151 - 20 20" 18" - 20

K3151 - 24 24" 18" - 24

Material: Steel (Stainless Steel available)Standard Finish: Pre- GalvanizedService: Designed to protect pipe insula-tion when used with hangersOrdering: Specify part number and finish

66

Pipe Covering Protection Saddle - K3160-K3165...

Size for Roller Part Number


K3114;K3120;K3122;K3122A

K3117SL;K3118SL;K3119SL;

K3124; K3126 K3110

DesignLoad(Lbs.) Wt./C (Lbs.)

K3160 - 3/4

3/4"

2” 2” to 3 1/2” 2 1/2” 1200 122

K3161 - 3/4 3” 2” to 3 1/2” 3 1/2” 1200 228

K3162 - 3/4 4” 2” to 3 1/2” 5” 1200 297

K3160 - 1

1"

2 1/2” 2” to 3 1/2” 3” 1200 156

K3161 - 1 3” 2” to 3 1/2” 4” 1200 228

K3162 - 1 4” 2” to 3 1/2” 5” 1200 297

K3160 - 1 1/4

1 1/4"

2 1/2” 2” to 3 1/2” 3” 1200 156

K3161 - 1 1/4 3 1/2” 2” to 3 1/2” 5” 1200 228

K3162 - 1 1/4 4” 2” to 3 1/2” 5” 1200 297

K3163 - 1 1/4 5” 4” to 6” 6” 1200 342

K3160 - 1 1/2

1 1/2"

3” 2” to 3 1/2” 3 1/2” 1200 172

K3161 - 1 1/2 3 1/2” 2” to 3 1/2” 5” 1200 239

K3162 - 1 1/2 5” 4” to 6” 6” 1800 311

K3163 - 1 1/2 6” 4” to 6” 8” 1800 417

K3160 - 2

2"

3 1/2” 2” to 3 1/2” 4” 1200 172

K3161 - 2 4” 2” to 3 1/2” 5” 1200 239

K3162 - 2 5” 4” to 6” 6” 1800 311

K3163 - 2 6” 4” to 6” 8” 1800 417

K3164 - 2 8” 4” to 6” 8” 1800 441

K3160 - 2 1/2

2 1/2"

3 1/2” 2” to 3 1/2” 5” 1200 210

K3161 - 2 1/2 5” 4” to 6” 6” 1200 268

K3162 - 2 1/2 6” 4” to 6” 8” 1800 358

K3163 - 2 1/2 8” 4” to 6” 8” 1800 417

K3164 - 2 1/2 8” 4” to 6” 10” 1800 459

InsulationThickness

PartNumber

1" K3160

1 1/2" K3161

2" K3162

2 1/2" K3163

3" K3164

4" K3165

67

Pipe Covering Protection Saddle (cont.)

Part Number

Centerline of Pipe to Centerline of Roll

"A" K3114;K3120; K3122;

K3122A

"B" K3117SL;K3118SL;K3119SL;

K3124; K3126"A"

K3110

Centerline ofPipe to Outsideof Saddle "C"

Thickness ofCovering

(Per ASTM C585)

K3160 - 3/4 2" 2 1/4" 2" 1 9/16" 7/8"

K3161 - 3/4 2 7/16" 2 7/8" 2 3/8" 2 3/16" 1 1/2"

K3162 - 3/4 3 5/16" 3 7/16" 3 3/8" 2 3/4" 1 15/16"

K3160 - 1 2 5/16" 2 1/2" 2 5/16" 1 13/16" 1 1/16"

K3161 - 1 2 7/8" 3" 2 7/8" 2 5/16" 1 9/16"

K3162 - 1 3 7/16" 3 5/8" 3 1/2" 2 7/8" 2 1/8"

K3160 - 1 1/4 2 9/16" 2 11/16" 2 1/2" 2" 15/16"

K3161 - 1 1/4 3 1/8" 3 1/4" 3 1/8" 2 9/16" 1 7/16"

K3162 - 1 1/4 3 11/16" 3 13/16" 3 7/16" 3 1/16" 2 1/8"

K3163 - 1 1/4 4 1/16" 4 1/8" 4 1/16" 3 7/16" 2 7/16"

K3160 - 1 1/2 2 11/16" 2 7/8" 2 7/16" 2 1/8" 1 1/32"

K3161 - 1 1/2 3 3/16" 3 5/16" 3 3/16" 2 9/16" 1 17/32"

K3162 - 1 1/2 3 9/16" 3 13/16" 3 13/16" 3 1/8" 2"

K3163 - 1 1/2 4 7/16" 4 3/8" 4 1/2" 3 5/8" 2 27/32"

K3160 - 2 2 15/16" 3 1/8" 2 15/16" 2 3/8" 1 1/16"

K3161 - 2 3 7/16" 3 5/8" 3 1/2" 2 7/8" 1 19/32"

K3162 - 2 4 1/8" 4 1/8" 4 1/16" 3 7/16" 2 1/8"

K3163 - 2 4 11/16" 4 11/16" 4 3/4" 3 15/16" 2 5/8"

K3164 - 2 5 1/4" 5 3/16" 5 1/4" 4 1/2" 3 1/8"

K3160 - 2 1/2 3 1/4" 3 3/8" 3 1/4" 2 5/8" 1 1/16"

K3161 - 2 1/2 3 7/8" 3 15/16" 3 7/8" 3 1/4" 1 7/8"

K3162 - 2 1/2 4 9/16" 4 9/16" 4 5/8" 3 7/8" 2 5/16"

K3163 - 2 1/2 5 1/8" 5" 5 1/8" 4 1/4" 2 7/8"

K3164 - 2 1/2 5 7/16" 5 5/16" 5 1/2" 4 9/16" 3 1/16"

Material: Carbon Steel (Stainless steel available)Standard Finish: Plain or Electro-PlatedService: Designed to protect pipe insulation onhigh temperature pipe lines. Saddles are 12”long. Center rib is furnished on all saddle sizes12” and aboveOrdering: Specify part number and finish. SelectPart Number by insulation thickness and addnominal pipe size

68



K3114; K3120;K3122;K3122A

K3117SL;K3118SL;

K3119SL; K3124;K3126 K3110

Design Load(Lbs.)

Wt./C(Lbs.)

K3160 - 3

3"

4” 2” to 3 1/2” 5” 1800 210

K3161 - 3 5” 4” to 6” 6” 1800 268

K3162 - 3 6” 4” to 6” 8” 1800 358

K3163 - 3 8” 4” to 6” 8” 1800 417

K3164 - 3 8” 8” to 10” 10” 1800 459

K3160 - 3 1/2

3 1/2"

5” 4” to 6” 6” 1200 226

K3161 - 3 1/2 6” 4” to 6” 8” 1800 289

K3162 - 3 1/2 8” 4” to 6” 8” 1800 364

K3163 - 3 1/2 8” 8” to 10” 10” 1800 422

K3164 - 3 1/2 10” 8” to 10” 10” 1800 488

K3160 - 4

4"

5” 4” to 6” 6” 1800 226

K3161 - 4 6” 4” to 6” 8” 1800 289

K3162 - 4 8” 8” to 10” 8” 1800 364

K3163 - 4 8” 8” to 10” 10” 1800 422

K3164 - 4 10” 8” to 10” 10” 1800 488

K3165 - 4 10” 8” to 10” 12” 1800 616

K3160 - 5

5"

6” 4” to 6” 8” 1800 250

K3161 - 5 8” 4” to 6” 8” 1800 289

K3162 - 5 8” 8” to 10” 10” 1800 364

K3163 - 5 10” 8” to 10” 10” 1800 422

K3164 - 5 10” 8” to 10” 12” 1800 488

K3165 - 5 12” 8” to 10” 14” 1800 643

K3160 - 6

6"

8” 8” to 10” 8” 1800 387

K3161 - 6 8” 8” to 10” 10” 1800 498

K3162 - 6 10” 8” to 10” 10” 1800 594

K3163 - 6 10” 8” to 10” 12” 1800 694

K3164 - 6 12” 8” to 10” 12” 1800 794

K3165 - 6 14” 12” to 14” 16” 1800 1009


69



Part Number

"A" K3114;K3120;K3122;K3122A

"B" K3117SL;K3118SL; K3119SL;

K3124; K3126"A"

K3110


Thicknessof Covering(Per ASTM

C 585)

K3160 - 3 3 3/8" 3 1/2" 3 5/8" 3" 1 1/32"

K3161 - 3 4 1/4" 4 5/16" 4 1/4" 3 9/16" 1 9/16"

K3162 - 3 4 15/16" 4 15/16" 4 15/16" 4 3/16" 2 1/16"

K3163 - 3 5 7/16" 5 3/8" 5 7/16" 4 5/8" 2 9/16"

K3164 - 3 5 13/16" 6" 5 7/8" 4 15/16" 3 1/16"

K3160 - 3 1/2 3 13/16" 3 7/8" 3 13/16" 3 3/16" 1 1/32"

K3161 - 3 1/2 4 3/8" 4 3/8" 4 3/8" 3 11/16" 1 9/16"

K3162 - 3 1/2 5" 5" 5" 4 1/4" 2 1/16"

K3163 - 3 1/2 5 1/2" 5 11/16" 5 9/16" 4 5/8" 2 25/32"

K3164 - 3 1/2 6 3/16" 6 5/16" 6 3/16" 5 1/4" 3 1/16"

K3160 - 4 4 1/8" 4 1/8" 4 1/8" 3 7/16" 1 1/16"

K3161 - 4 4 11/16" 4 7/16" 4 3/4" 4" 1 9/16"

K3162 - 4 5 5/16" 5 1/4" 5 5/16" 4 1/2" 2 1/16"

K3163 - 4 5 13/16" 6" 5 7/8" 4 15/16" 2 9/16"

K3164 - 4 6 7/16" 6 9/16" 6 7/16" 5 1/2" 3 1/8"

K3165 - 4 7 9/16" 7 5/8" 7 9/16" 6 1/2" 4 1/8"

K3160 - 5 4 11/16" 4 11/16" 4 3/4" 3 15/16" 1 1/32"

K3161 - 5 5 5/16" 5 1/4" 5 5/16" 4 9/16" 1 17/32"

K3162 - 5 5 7/8" 6 1/8" 6" 5 1/8" 2 1/32"

K3163 - 5 6 7/16" 6 9/16" 6 7/16" 5 9/16" 2 9/16"

K3164 - 5 7" 7 3/16" 7 1/8" 6 1/8" 3 3/32"

K3165 - 5 8 3/16" 8 3/16" 8 3/8" 7 1/16" 4 5/32"

K3160 - 6 5 1/4" 5 1/4" 5 1/4" 4 1/2" 1"

K3161 - 6 5 7/8" 6 1/16" 5 15/16" 5" 1 1/2"

K3162 - 6 6 1/2" 6 5/8" 6 1/2" 5 9/16" 2 1/16"

K3163 - 6 7 1/16" 7 1/8" 7 1/8" 6 1/16" 2 9/16"

K3164 - 6 7 5/8" 7 11/16" 7 5/8" 6 9/16" 3 1/16"

K3165 - 6 9 1/16" 8 15/16" 9" 7 3/4" 4 3/16"

70



K3114;K3120;K3122;K3122A

K3117SL; K3118SL;K3119SL; K3124;

K3126 K3110Design Load

(Lbs.) Wt./C (Lbs.)

K3160 - 8

8"

10” 8” to 10” 12” 1800 478

K3161 - 8 10” 8” to 10” 12” 1800 554

K3162 - 8 10” 8” to 10” 12” 1800 674

K3163 - 8 12” 8” to 10” 14” 1800 782

K3164 - 8 14” 12” to 14” 16” 1800 893

K3165 - 8 16” 12” to 14” 18” 1800 1089

K3160 - 10

10"

12” 12” to 14” 14” 1800 546

K3161 - 10 12” 12” to 14” 14” 1800 642

K3162 - 10 14” 16” to 20” 16” 1800 750

K3163 - 10 14” 16” to 20” 16” 1800 850

K3164 - 10 16” 16” to 20” 18” 1800 957

K3165 - 10 18” 16” to 20” 20” 1800 1137

K3160 - 12

12"

14” 12” to 14” 16” 5000 688

K3161 - 12 14” 12” to 14” 16” 5000 836

K3162 - 12 16” 16” to 20” 18” 5000 963

K3163 - 12 16” 16” to 20” 18” 5000 1091

K3164 - 12 18” 16” to 20” 20” 5000 1218

K3165 - 12 20” 16” to 20” 24” 5000 1462

K3161 - 14

14"

16” 16” to 20” 18” 5000 828

K3162 - 14 16” 16” to 20” 18” 5000 963

K3163 - 14 18” 16” to 20” 20” 5000 1099

K3164 - 14 18” 16” to 20” 20” 5000 1230

K3165 - 14 20” 24” 24” 5000 1486

K3161 - 16

16"

18” 16” to 20” 20” 5000 907

K3162 - 16 18” 16” to 20” 20” 5000 1039

K3163 - 16 20” 16” to 20” 24” 7200 1163

K3164 - 16 20” 24” 24” 7200 1298

K3165 - 16 24” 24” 24” 7200 1554


71



Part Number

"A" K3114;K3120; K3122;

K3122A

"B" K3117SL;K3118SL;K3119SL;

K3124; K3126"A"

K3110


Thickness ofCovering

(Per ASTM C585)

K3160 - 8 6 1/2" 6 5/8" 6 9/16" 5 9/16" 1 1/32"

K3161 - 8 7 1/16" 7 1/8" 7 1/16" 6 1/16" 1 9/16"

K3162 - 8 7 9/16" 7 5/8" 7 5/8" 6 9/16" 2 1/16"

K3163 - 8 8 5/16" 8 5/16" 8 1/2" 7 3/16" 2 11/16"

K3164 - 8 9 1/16" 8 15/16" 9" 7 3/4" 3 3/16"

K3165 - 8 10" 9 15/16" 10 1/16" 8 11/16" 4 3/16"

K3160 - 10 7 11/16" 7 3/4" 7 7/8" 6 5/8" 31/32"

K3161 - 10 8 5/16" 8 5/16" 8 7/16" 7 3/16" 1 5/8"

K3162 - 10 9" 8 7/8" 8 7/8" 7 11/16" 2 1/8"

K3163 - 10 9 5/8" 9 7/16" 9 1/2" 8 3/16" 2 5/8"

K3164 - 10 10 1/8" 10 3/16" 10 3/16" 8 3/4" 3 1/8"

K3165 - 10 11 1/4" 11 3/16" 11 1/4" 9 3/4" 4 1/8"

K3160 - 12 8 15/16" 8 13/16" 8 7/8" 7 5/8" 1 1/16"

K3161 - 12 9 9/16" 9 7/16" 9 1/2" 8 3/16" 1 5/8"

K3162 - 12 10 1/16" 10 1/8" 10 1/8" 8 3/4" 2 1/8"

K3163 - 12 10 5/8" 10 5/8" 10 5/8" 9 1/4" 2 5/8"

K3164 - 12 11 3/16" 11 3/16" 11 1/4" 9 11/16" 3 1/8"

K3165 - 12 12 5/16" 12 3/16" 12 5/16" 10 3/4" 4 1/8"

K3161 - 14 10 1/16" 9 15/16" 10 1/16" 8 11/16" 1 1/2"

K3162 - 14 10 5/8" 10 5/8" 10 5/8" 9 3/16" 2"

K3163 - 14 11 3/16" 11 3/16" 11 1/4" 9 3/4" 2 1/2"

K3164 - 14 11 3/4" 11 11/16" 11 3/4" 10 1/4" 3"

K3165 - 14 12 7/8" 12 7/16" 12 7/8" 11 3/16" 4"

K3161 - 16 11 1/8" 11 1/8" 11 3/16" 9 11/16" 1 1/2"

K3162 - 16 11 13/16" 11 11/16" 11 3/4" 10 1/4" 2"

K3163 - 16 12 5/16" 12 1/8" 12 5/16" 10 11/16" 2 1/2"

K3164 - 16 12 7/8" 12 9/16" 12 7/8" 11 1/4" 3"

K3165 - 16 13 15/16" 13 9/16" 13 15/16" 12 1/4" 4"

72




K3114;K3120;K3122;K3122A

K3117SL; K3118SL;K3119SL; K3124;

K3126 K3110Design Load

(Lbs.)Wt./C(Lbs.)

K3161 - 18

18"

20” 16” to 20” 24” 5000 979

K3162 - 18 20” 24” 24” 7200 1107

K3163 - 18 24” 24” 24” 7200 1230

K3164 - 18 24” 24” 24” 7200 1362

K3165 - 18 24” 24” - 7200 1617

K3161 - 20

20"

24” 24” 24” 7200 1043

K3162 - 20 24” 24” 24” 7200 1171

K3163 - 20 24” 24” - 7200 1294

K3164 - 20 24” 24” - 7200 1430

K3165 - 20 30” 30” - 7200 1689

K3161 - 24

24"

30” 30” - 7200 1179

K3162 - 24 30” 30” - 7200 1306

K3163 - 24 30” 30” - 7200 1442

K3164 - 24 30” 30” - 7200 1562

K3165 - 24 30” 30” - 7200 1821

K3161 - 30

30"

- 36” to 42” - 7200 1370

K3162 - 30 - 36” to 42” - 7200 1502

K3163 - 30 - 36” to 42” - 7200 1640

K3164 - 30 - 36” to 42” - 7200 1761

K3165 - 30 - 36” to 42” - 7200 2008

K3161 - 36

36"

- 36” to 42” - 7200 1574

K3162 - 36 - 36” to 42” - 7200 1701

K3163 - 36 - 36” to 42” - 7200 1857

K3164 - 36 - 36” to 42” - 7200 1961

K3165 - 36 - 36” to 42” - 7200 2216

73



Part Number

"A" K3114;K3120;K3122;K3122A

"B" K3117SL;K3118SL;K3119SL;

K3124; K3126"A"

K3110

Centerline of Pipeto Outside of Sad-

dle "C"

Thickness ofCovering (PerASTM C 585)

K3161 - 18 12 1/4" 12 1/8" 12 1/4" 10 11/16" 1 1/2"

K3162 - 18 12 7/8" 12 1/2" 12 7/8" 11 1/4" 2"

K3163 - 18 13 3/8" 13" 13 3/8" 11 11/16" 2 1/2"

K3164 - 18 13 15/16" 13 9/16" 13 15/16" 12 1/4" 3"

K3165 - 18 15" 14 9/16" - 13 1/4" 4"

K3161 - 20 13 3/8" 13" 13 3/8" 11 11/16" 1 1/2"

K3162 - 20 13 15/16" 13 1/2" 13 15/16" 12 3/16" 2"

K3163 - 20 14 7/16" 14" - 12 11/16" 2 1/2"

K3164 - 20 14 15/16" 14 9/16" - 13 3/16" 3"

K3165 - 20 16 1/4" 15 7/8" - 14 1/4" 4"

K3161 - 24 15 11/16" 15 5/16" - 13 11/16" 1 1/2"

K3162 - 24 16 1/4" 15 7/8" - 14 3/16" 2"

K3163 - 24 16 3/4" 16 5/16" - 14 5/8" 2 1/2"

K3164 - 24 17 3/8" 16 7/8" - 15 1/4" 3"

K3165 - 24 18 7/16" 17 15/16" - 16 1/4" 4"

K3161 - 30 - 18 7/8" - 16 11/16" 1 1/2"

K3162 - 30 - 19 3/8" - 17 3/16" 2"

K3163 - 30 - 19 15/16" - 17 11/16" 2 1/2"

K3164 - 30 - 20 1/2" - 18 3/16" 3"

K3165 - 30 - 21 1/2" - 19 3/16" 4"

K3161 - 36 - 22 1/8" - 19 11/16" 1 1/2"

K3162 - 36 - 22 5/8" - 20 3/16" 2"

K3163 - 36 - 23 3/16" - 20 11/16" 2 1/2"

K3164 - 36 - 23 11/16" - 21 3/16" 3"

K3165 - 36 - 24 11/16" - 22 3/16" 4"

74

Body Size "R" "S" "T" "U" "V" "W" "X" Wt./C (Lbs.)

1 3 1/2" 5/8" 5 7/8" 4 1/8" 1 3/4" 6 1/8" 3" 700

2 4" 5/8" 6 3/4" 4 3/8" 1 3/4" 7 1/8" 3" 800

3 4 3/8" 5/8" 7 5/8" 5 1/8" 1 3/4" 8 1/8" 3" 900

4 5 1/4" 5/8" 9 1/4" 6 1/8" 1 3/4" 10 1/8" 3" 1100

5 6 1/4" 5/8" 11 5/8" 7" 2 3/4" 12 1/8" 4" 1700

6 7" 5/8" 13 3/8" 8 1/4" 2 3/4" 14 1/8" 4" 2000

7 7 7/8" 3/4" 15 1/8" 9 7/8" 4" 16 1/8" 6" 4000

8 8 7/8" 3/4" 17" 10 7/8" 4" 18 1/8" 6" 4800

9 9 3/4" 3/4" 18 3/4" 11 7/8" 4" 20 1/8" 6" 5400

10 10 7/8" 3/4" 21" 11 3/4" 6" 22 1/8" 8" 6100

11 12 1/8" 7/8" 23 1/8" 14 1/2" 6" 24 1/8" 8" 8900

12 13" 7/8" 25" 15 1/2" 6" 26 1/8" 8" 10200

13 14 3/4" 1 1/8" 27 3/4" 17 1/8" 6" 28 1/8" 8" 11000

14 16 1/2" 1 1/8" 31 1/2" 19 1/4" 6" 32 1/8" 8" 15000

Pipe Alignment Guide - K3281-K3287...

Notes: CU sizes have lead shims between the steel clamp and thecopper tubing. Guides with greater allowable movement available

75


1" 1 1/2"

Nominal PipeSize Part Number BS* SAM** Part Number BS* SAM**

1/2" K3281 - 1/2 1 4" K3281 - 1/2 1 4"

3/4" K3281 - 3/4 1 4" K3282 - 3/4 2 4"

1" K3281 - 1 1 4" K3282 - 1 2 4"

1 1/4" K3281 - 1 1/4 1 4" K3282 - 1 1/4 2 4"

1 1/2" K3281 - 1 1/2 2 4" K3281 - 1 1/2 2 4"

2" K3281 - 2 2 4" K3282 - 2 3 4"

2 1/2" K3281 - 2 1/2 3 4" K3281 - 2 1/2 3 4"

3" K3281 - 3 3 4" K3282 - 3 4 4"

4" K3281 - 4 4 4" K3281 - 4 4 4"

5" K3281 - 5 5 4" K3281 - 5 5 4"

6" K3281 - 6 5 4" K3281 - 6 5 4"

8" K3281 - 8 6 4" K3281 - 8 6 4"

10" K3281 - 10 8 6" K3281 - 10 8 6"

12" K3281 - 12 9 6" K3281 - 12 9 6"

14" K3281 - 14 10 6" K3281 - 14 10 6"

16" K3281 - 16 11 8" K3281 - 16 11 8"

18" K3281 - 18 12 8" K3281 - 18 12 8"

20" K3281 - 20 13 8" K3281 - 20 13 8"

24" K3281 - 24 14 8" K3281 - 24 14 8"

Pipe Alignment Guide (cont.)

Material: SteelStandard Finish: Black PrimerService: Designed for use in directing thermal expansion of insulated or non-insulated pipe in the direction permitted by expansion joints or loops. The use oftwo or more guides on both sides of an expansion joint of loop is recommended.Pipe lines should be supported with hangers or rollers so that when properly in-stalled, the guides will not be supporting any pipe loads. Maximum operatingtemperature should not exceed 750°FOrdering: Specify part number and finish. For use with copper tubing, add CT suf-fix to the part number

* BS = Body Size** SAM = Standard Allowable Movement

76


2" 2 1/2"

NominalPipe Size Part Number BS* SAM** Part Number BS* SAM**

1/2" K3283 - 1/2 2 4" K3284 - 1/2 3 4"

3/4" K3283 - 3/4 3 4" K3284 - 3/4 4 4"

1" K3283 - 1 3 4" K3284 - 1 4 4"

1 1/4" K3283 - 1 1/4 3 4" K3284 - 1 1/4 4 4"

1 1/2" K3283 - 1 1/2 3 4" K3284 - 1 1/2 4 4"

2" K3283 - 2 4 4" K3283 - 2 4 4"

2 1/2" K3283 - 2 1/2 4 4" K3283 - 2 1/2 4 4"

3" K3283 - 3 4 4" K3284 - 3 5 4"

4" K3283 - 4 5 4" K3284 - 4 5 4"

5" K3281 - 5 5 4" K3284 - 5 6 4"

6" K3283 - 6 6 4" K3283 - 6 6 4"

8" K3283 - 8 7 6" K3284 - 8 8 6"

10" K3281 - 10 8 6" K3284 - 10 9 6"

12" K3281 - 12 9 6" K3284 - 12 10 6"

14" K3281 - 14 10 6" K3281 - 14 10 6"

16" K3281 - 16 11 8" K3281 - 16 11 8"

18" K3281 - 18 12 8" K3281 - 18 12 8"

20" K3281 - 20 13 8" K3281 - 20 13 8"

24" K3281 - 24 14 8" K3281 - 24 14 8"



77


3" 3 1/2" 4"

NominalPipe Size Part Number BS* SAM** Part Number BS* SAM** Part Number BS* SAM**

1/2" K3285 - 1/2 4 4" K3285 - 1/2 4 4" K3287 - 1/2 5 4"

3/4" K3284 - 3/4 4 4" K3286 - 3/4 5 4" K3286 - 3/4 5 4"

1" K3284 - 1 4 4" K3286 - 1 5 4" K3286 - 1 5 4"

1 1/4" K3284 - 1 1/4 4 4" K3286 - 1 1/4 5 4" K3286 - 1 1/4 5 4"

1 1/2" K3284 - 1 1/2 4 4" K3286 - 1 1/2 5 4" K3286 - 1 1/2 5 4"

2" K3285 - 2 5 4" K3285 - 2 5 4" K3287 - 2 6 4"

2 1/2" K3285 - 2 1/2 5 4" K3285 - 2 1/2 5 4" K3287 - 2 1/2 6 4"

3" K3284 - 3 5 4" K3286 - 3 6 4" K3286 - 3 6 4"

4" K3285 - 4 6 4" K3285 - 4 6 4" K3287 - 4 7 6"

5" K3284 - 5 6 4" K3286 - 5 7 6" K3287 - 5 8 6"

6" K3285 - 6 7 6" K3286 - 6 8 6" K3286 - 6 8 6"

8" K3284 - 8 8 6" K3286 - 8 9 6" K3286 - 8 9 6"

10" K3284 - 10 9 6" K3286 - 10 10 6" K3286 - 10 10 6"

12" K3284 - 12 10 6" K3286 - 12 11 6" K3286 - 12 11 6"

14" K3285 - 14 11 8" K3285 - 14 11 8" K3287 - 14 12 8"

16" K3285 - 16 12 8" K3285 - 16 12 8" K3287 - 16 13 8"

18" K3285 - 18 13 8" K3285 - 18 13 8" K3287 - 18 14 8"

20" K3285 - 20 14 8" K3285 - 20 14 8" K3285 - 20 14 8"

24" - - - - - - - - -



78

Pipe Size TravelPart

NumberDepth

"B"Diameter

"D"Height

"H"Length

"L"Width

"P"Width"W"

MaximumReccommended

Load (Lbs.)

1" to 24"

2 1/2" K3897 5" 4" 5 5/16" 9 1/2" n/a 9 1/2" 16000

4"

K3891 2" n/a 4 5/8" 6" 4" n/a 12000

K3892 4" n/a 5 1/8" 6" 4" 7" 12000

K3893 4" n/a 5 1/8" 6" 4" 7" 12000

K3894 2" n/a 4 5/8" 6" n/a 6" 12000

K3895 4" n/a 5 1/8" 6" 6" 10" 24000

K3896 4" n/a 5 1/8" 6" 6" 10" 24000

10"

K3891 2" n/a 4 5/8" 12" 4" n/a 12000

K3892 4" n/a 5 1/8" 12" 4" 7" 12000

K3893 4" n/a 5 1/8" 12" 4" 7" 12000

K3894 2" n/a 4 5/8" 12" n/a 6" 12000

K3895 4" n/a 5 1/8" 12" 6" 10" 24000

K3896 4" n/a 5 1/8" 12" 6" 10" 24000

Pipe Slide Assembly Series - K3891-K3897

Material:Tee - Carbon SteelFacing Plate - Stainless Steel Type 304Base - Carbon Steel with Teflon slide pads

Finish: Black paintService: Designed to support pipe where horizontal movement from expansion and con-traction is present. Fits up to 3” insulation thicknessOperating Temperature Rating: 400°F maximumLoading: Capable of supporting constant loads up to 2,000 Psi at 70°F

79

Pipe Slide Assembly Series (cont.)

K3891 K3892 K3893

K3894K3895 K3896

K3897 Option: End PlatesOption: K3140Clamps

Notes: K3891, K3892 and K3893 are designed for longitudinal movement only. K3894,K3895 and K3896 are designed for longitudinal and limited transverse movement.K3897 is designed for up to 5 inches of horizontal movement in any direction, depend-ing on the installed position.

K

4” (except K3897)10” (except K3897)2 1/2” (K3897 only) K

80


K3891 & K3894 Side View K3892 & K3895 Side View

K3894 Front View

K3891 Front View

K3892 Front View

K3895 Front View

81


K3897 Side View

K3893 & K3896 Side View

K3897 Front ViewK3893 Front View

K3896 Front View

82

Pipe Slide Assembly Series - K3991-K3993B...

Pipe Size TravelPart Num-

berDepth

"B"Width

"C" Height "H"Length

"L"Width

"P"Width"W"

MaximumReccommended

Load (Lbs.)

1" to24"

4"

K3991 - 5 3" 8 1/2" 4 7/16" 6" 6" n/a 16000

K3993 - 5 3" n/a 4 7/16" 6" 2" 4 1/2" 12000

K3993B - 5 3" 8 1/2" 4 11/16" 6" 2" 4 1/2" 12000

K3991 - 10 4" 14 1/2" 4 7/8" 6" 12" n/a 32000

K3993 - 10 4" n/a 4 7/8" 6" 6" 8 11/16" 24000

K3993B - 10 4" 14 1/2" 5 1/8" 6" 6" 8 11/'16" 24000

10"

K3991 - 5 3" 8 1/2" 4 7/16" 12" 6" n/a 16000

K3993 - 5 3" n/a 4 7/16" 12" 2" 4 1/2" 12000

K3993B - 5 3" 8 1/2" 4 11/16" 12" 2" 4 1/2" 12000

K3991 - 10 4" 14 1/2" 4 7/8" 12" 12" n/a 32000

K3993 - 10 4" n/a 4 7/8" 12" 6" 8 11/16" 24000

K3993B - 10 4" 14 1/2" 5 1/8" 12" 6" 8 11/'16" 24000

Material: Tee and H Slides - Carbon Steel with Heat Cured PTFE modifiedcoating at slide plate; Base - Carbon Steel with Teflon slide partsStandard Finish: Black paintService: Designed to support pipe where horizontal movement fromexpansion and contraction is present.Operating temperature rating: 400°F maximum at baseLoading: Capable of supporting constant loads up to 2000 Psi at 70°F

83

Maximum

Pipe Side Assembly Series (cont.)

K3993-5

K3993B-5

T-Slide

CL (standard slidew/K3140 clamps)

EP (standard slide w/end plates)H-Slide

K3993B-10

K3993-10

K

K3140

84

Pipe Side Assembly Series (cont.)

Pipe Size "BOP" "COP"

10" 4 1/8" 9 1/2"

12" 4 1/4" 10 5/8"

14" 4 3/8" 11 3/8"

16" 4 3/8" 12 3/8"

18" 4 3/8" 13 3/8"

20" 4 1/2" 14 1/2"

24" 4 5/8" 16 5/8"

K3991-5 & K3991-10 Side View

K3991-5 Front View K3991-10 Front View

Pipe to be field weldedto T or H slides

85



10" 4 1/8" 9 1/2"

12" 4 1/4" 10 5/8"

14" 4 3/8" 11 3/8"

16" 4 3/8" 12 3/8"

18" 4 3/8" 13 3/8"

20" 4 1/2" 14 1/2"

24" 4 5/8" 16 5/8"

K3993-5 Front View K3993-10 Front View

K3993-5 & K3993-10 Side View


86


10" 4 3/8" 9 3/4"

12" 4 1/2" 10 7/8"

14" 4 5/8" 11 5/8"

16" 4 5/8" 12 5/8"

18" 4 5/8" 13 5/8"

20" 4 3/4" 14 3/4"

24" 4 7/8" 16 7/8"



K3993B-5 Front View K3993B-10 Front View

K3993B-5 & K3993B-10 Side View

87

MaxSpan R.H.

Pipe Size Insulation Length Shield Length Shield Gauge Plate Dimensions Travel Allowed

1/2" to 1 1/2" 9" 6" 18 ga. n/a +/- 2"

2" to 3" 9" 6" 16 ga. n/a +/- 2"

4" to 8" 9" 6" 14 ga. 1/8" x 6" +/- 2"

10" to 12" 12" 9" 14 ga. 1/4" x 6" +/- 2"

14" to 24" 14" 12" 14 ga. 1/4" x 10" +/- 3"

Description/Features: The MaxSpan R.H. thermal hanger shield is specifically designed to provide asuperior safety margin for pipe mounted on pipe rollers, flat surfaces or with supports where pointloading may be a concern. These rugged units allow hanger spans up to the maximum allowed in Ta-ble 3 of the MSS SP-69. They are appropriate for either hot or cold pipe systems. The insulation andvapor barrier extend beyond the galvanized steel shield for a neat vapor-tight joint with the adjoininginsulation. Units for pipe 4” and larger include a wear/weight distribution plate of carbon steel(primer pained). Additionally, a segment of ultra high density, 900 PSI calcium silicate is fabricatedinto units for 10” pipe size and larger. The MaxSpan R.H. meets or exceeds the MSS standard for Type40 Shields per MSS SP-58, Paragraph 9.2.2Applications: For indoor use on all roller hanger systems and flat surfaces Chilled to steam piping and dual temperature lines Hanger spans per MSS SP-69 Table 3 Insulation thickness 1/2” to 4”Materials/Construction: 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread,

Smoke Developed -0- Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0- G-90 Galvanized steel shield, small check per ASTM A-527 Wear/Weight Distribution Plate—carbon steel meeting ASTM A-36 Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84 Structural insert (10” pipe and larger) minimum 900 PSI calcium silicate

Shown with 900 PSI Structural Insert

88

Pro-Shield

Description/Features: Pro-Shields are 360° thermal hanger shields designed to meet the broadestrange of pipe support applications. They provide a continuous section of insulation and vapor barrierthrough a wide variety of pipe hangers for pipe systems operating between +20°F and 1200°F. The in-sulation and vapor barrier extend beyond the galvanized steel shield for a neat vapor-tight joint withthe adjoining insulation. Pro-Shields are suitable for use in any type of clamps as well as in band-typehangers and on flat surfaces. To assure proper support in all situations, high density 450 PSI insertsare installed in units for 10” pipe with 1” insulation thickness and in all units for 12” pipe and larger.Pro-Shields meets or exceeds the MSS standard for Type 40 Shields per MSS SP-58, Paragraph 9.2.2Applications: For indoor use on clamping support systems, flat surfaces, clevis or other band-type hangers Pipe sizes 16” and larger in clevis or two bolt hangers only Chilled to steam piping and dual temperature lines Hanger spans per MSS SP-69 Table 5 Insulation thickness 1/2” to 4”Materials/Construction: 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Devel-

oped -0-, Thermal Conductivity (’k’) .40 @ 75°F mean Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0- G-90 Galvanized steel shield, small check per ASTM A-527 Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame Spread -5-, Smoke

Developed -5- Structural insert (12” pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-

795 and E-84, Flame Spread -0-, Smoke Developed -0- All units and components are asbestos free and 100% made and assembled in the U.S.A

Pipe Size Insulation Length Shield Length Shield Gauge

1/2" to 1 1/2" 6" 4" 22 ga.

2" to 5" 6" 4" 20 ga.

6" to 8" 9" 6" 16 ga.

10" to 12" 9" 6" 14 ga.

14" to 24" 12" 9" 12 ga.

89

Quik-Shield

Description/Features: Quik-Shields are economically priced 180° thermal hanger shields providing acontinuous section of insulation and vapor barrier through a variety of pipe hangers. The vapor barrierjacket extends beyond the galvanized steel shield and beyond the galvanized steel shield and beyoundthe insulation insert for a neat, vapor-tight fit with both the adjoining and the field-applied topinsulation. To assure proper support in all situations, high density 450 PSI structural inserts areinstalled on units for 10” pipe with 1” wall thickness and on all units for 12” pipe and largerApplications: For indoor use on flat surfaces, clevis or other band-type hangers Pipe sizes 16” or larger in clevis hangers only Chilled to steam piping and dual temperature lines Hanger spans per MSS SP-69 Table 5 Insulation thickness 1/2” to 4”Materials/Construction: 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Devel-

oped -0-, Thermal Conductivity (’k’) .40 @ 75°F mean Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0- G-90 Galvanized steel shield, small check per ASTM A-527 Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame Spread -5-, Smoke

Developed -5- Structural insert (12” pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-

795 and E-84, Flame Spread –0-, Smoke Developed -0- All units and components are asbestos free and 100% made and assembled in the U.S.A

Pipe Size Insulation Length Shield Length Shield Gauge

1/2" to 1 1/2" 6" 4" 22 ga.

2" to 5" 6" 4" 20 ga.

6" to 8" 9" 6" 16 ga.

10" to 12" 9" 6" 14 ga.

14" to 24" 12" 9" 12 ga.