KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 1
keep it simple scienceKey Concepts in Colour
Preliminary Physics Topic 1The World Communicates
Usage & copying is permitted according to the following
Site Licence ConditionsA school (or other recognised educationalinstitution) may store the disk contents in multiplecomputers (or other data retrieval systems) tofacilitate the following usages of the disk contents:
School staff may print unlimited copies on paperand/or make unlimited photocopies at one schooland campus only, for use by students enrolled atthat school and campus only, for non-profit,educational use only.
School staff may use the disk contents to makeaudio-visual displays, such as via computernetworks, or by using data projectors or overheadprojectors, at one school and campus only, forviewing by students enrolled at that school andcampus only, for non-profit, educational use only.
School staff may allow students enrolled at thatschool and campus only to obtain copies of the diskfiles and store them in each students personalcomputer for non-profit, educational use only.
IN SUCH CASE, THE SCHOOL SHOULDMAKE PARTICIPATING STUDENTS AWARE
OF THESE SITE LICENCE CONDITIONSAND ADVISE THEM THAT COPYING OF
DATA FILES BY STUDENTS MAYCONSTITUTE AN ILLEGAL ACT.
In every usage of the disk files, the KISS logo andcopyright declaration must be included on eachpage, slide or frame.
Please Respect Our Rights Under Copyright Law
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au Slide 2 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Preliminary Physics Topic 1
The World CommunicatesFirst, Some Revision:ENERGYEnergy is what causes changes and does work. The familiar forms of energy include:
HEAT ELECTRICITY KINETIC (energy in a moving object) POTENTIAL (energy stored,
such as the chemical energy in petrol).
Many forms of energy move around as WAVES. A wave is a carrier of energy.
In a wave, energy moves, but matter does not.
The strings vibrate.
This causes the air to vibrate too.Waves of vibration spread out through the air...
sound waves.
The air vibrates, but does not go anywhere.
Waves Carry EnergyWithout the Transfer of Matter
Water waves carry energy across thesurface of a pond. The water vibrates
up & down, but goes nowhere.
TYPES of WAVESExamples of energy which movesaround as waves include
SOUND LIGHT
RADIO SIGNALS WATER WAVES
MICROWAVES
... and many more
ENERGY CONVERSIONSEnergy can be converted from one form to another.
In your mobile phone the SOUNDWAVES of your voice are converted toELECTRICAL signals, then transmittedas RADIO WAVES to your friend, whose
phone converts it back again.
SOUND ELECTRICAL RADIO
In this topic you will learn about waves and theirproperties and features, and how they they are used
for communication.
X-RAYS
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 3 Usage & copying is permitted according to the Site Licence Conditions only
Wave Types &Properties
Nature ofSound.
Speed, Pitchand Loudness
Superposition& Interference
Production,Detection,Dangers
Inverse Square Law
EM Waves inCommunication
Law of Reflection
Light & Mirrors.Reflection in
Communication.
Refraction & Snells Law.Light, Lenses & Total
Internal Reflection
The EMSpectrum
The WaveEquation
GraphingWaves
The WorldCommunicates
1. Waves2. Sound
Waves
3. ElectromagneticWaves
4. Reflection & Refraction
5. DigitalCommunication
& Storage
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 4 Usage & copying is permitted according to the Site Licence Conditions only
1. THE NATURE OF WAVESWaves Carry Energy
... or in 2 dimensions:
Ripples spreading onthe surface of a pond.
...or in 3 dimensions,
such as when light radiates in all directionsfrom a glowing object.
Waves & MediumsMechanical waves are those which need a medium to travel through.For example, a water wave must have water to travel in. Sound wavesneed air, or water, or some substance to move in. They CANNOT travelin a vacuum.
Electromagnetic (EM) waves do NOT need a medium... they can travelthrough a vacuum, and in fact travel fastest in a vacuum. EM wavesinclude light, radio waves, ultra-violet and other types, and are studied indetail in a later section.
Pulses moving along a slinky spring
CCoommpprreesssseedd sseeccttiioonnss iinn tthhee sspprriinngg mmoovvee aalloonngg iitt lliikkee aa MMeexxiiccaannWWaavvee...... eenneerrggyy iiss ttrraannssffeerrrreedd,, bbuutt tthhee ccooiillss mmeerreellyy oosscciillllaattee bbaacckk
aanndd ffoorrtthh aanndd ddoo nnoott aaccttuuaallllyy ggoo aannyywwhheerree..
keep it simple science
Waves carry energy,without the transferof matter.
This can occur in 1dimension:
Describing WavesA wave is a vibration. In a mechanical wave, the particles (atoms &molecules) in the medium vibrate to transmit the wave energy. In EMwaves the vibration occurs in electric and magnetic fields.
Consider a wave in a rope which has been given a single up-and-downtwitch:
Energy moves along the rope, but the rope itself doesnt go anywhere.Particles of the medium (the rope fibres) vibrate up-and-down as theenergy moves across.
If the rope is wiggled constantly up-and-down, you get not just onepulse, but a periodic wave with one pulse following another.
CCRREESSTTA PULSE WAVE ppaarrtt ooff tthhee rrooppee ((mmeeddiiuumm))vviibbrraatteess uupp && ddoowwnn
TTRROOUUGGHH
EEnneerrggyy mmoovveessaalloonngg tthhee rrooppee
rrooppee
A PERIODIC WAVE
TTRROOUUGGHH
CCRREESSTTEEnneerrggyy mmoovveess
MECHANICAL WAVES require a medium to travel through.
ELECTROMAGNETIC WAVES do not.
A PULSE WAVE is a single wave disturbance.
PERIODIC WAVES contain a series of pulses, with a continuous set of crests and troughs.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 5 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Rope vibrates up and down
A PERIODIC, TRANSVERSE WAVE
TTRROOUUGGHH
CCRREESSTTEnergy moves
This form of a wave, where the medium vibrates atright angles to the direction that the energy moves,is called a Transverse Wave.
TRANSVERSE WAVESvibrate at right angles to the direction
that the energy is moving.
Energy flow
Vibration in medium
Transverse & Longitudinal WavesLongitudinal waves are when the particles of themedium vibrate back-and-forth in the same line asthe energy moves. For example, when a series ofcompressions and rarefactions are sent alonga slinky spring.
EEnneerrggyy mmoovveess
LONGITUDINAL WAVE IN A SPRING
ccoommpprreessssiioonniinn sspprriinngg
rraarreeffaaccttiioonn((wwhheerree sspprriinngg iiss
ssttrreettcchheedd))
SSpprriinngg vviibbrraatteess
Earthquake Shock Waves occur in differentforms, both Transverse & Longitudinal.
LONGITUDINAL WAVESvibrate back-and-forth in the same
direction that the energy is moving.
Energy flow
Vibration in medium
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 6 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Wavelength = the distance from one crest to the next.(or from one trough to the next, or from one compression tothe next) The S.I. unit is the metre (m).
The Greek letter lambda is used as the symbol forwavelength.
Amplitude (a or A) = the distance that a particle in themedium is displaced from its rest position at a crest ortrough. i.e. the maximum displacement distance.
Frequency (f) = the rate at which the wave is vibrating.Frequency is the number of waves that pass a given pointin 1 second, or the number of complete vibrations persecond.
S.I. unit is the hertz (Hz) 1 Hz = 1 wave per second.
Wave MeasurementsAll periodic waves, whether Longitudinal or Transverse, Mechanical or Electromagnetic,
can be described and measured by their:-
Period (T) = the time (in seconds) for one completevibration to occur.
Note that there is a simplerelationship betweenFrequency and Period... theyare reciprocals.
Velocity (v) = the speed of the wave,in metres/sec.(ms-1)
There is a simple relationship between Velocity,Wavelength and Frequency:
Velocity = Frequency x Wavelength
THE WAVE EQUATION
V = f
WAVELENGTH
AMPLITUDEWave cycles per secondis FREQUENCY
T = 1 and f = 1 f T
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 7 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Example Problem 1A water wave in the ocean has a wavelength of85m, and a velocity of 4.5ms-1.a) Find the frequency. b) What is the period?
Solutiona) V = f
4.5 = f x 85f = 4.5 / 85
= 0.053 Hz (5.3 x 10-2 Hz)(i.e. only a small fraction of a wave passes by eachsecond.)
b) T = 1 / f= 1 / 0.053= 19 s
(i.e. it takes 19 seconds for 1 complete wave, crest to crest, to pass by)
Wave Equation CalculationsExample Problem 2A sound wave has a period of 2.00x10-3s. (T= 0.002s) Sound travels in air at a velocity of330ms-1.a) What is the frequency of the wave?b) Find the wavelength.
Solutiona) f = 1 / T
= 1 / 0.002= 500Hz (i.e. 500 vibrations per sec.)
b) V = f 330 = 500 x
= 330 / 500= 0.66m (i.e. 66cm from crest to crest)
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 8
Usage & copying is permitted according to the Site Licence Conditions only
Graphing WavesA good way to represent a wave is by
using a graph.
Imagine a floating cork bobbing up and down as a series ofripples move across the water surface (i.e. a periodic wave).
If you graph the (up-down) displacement of the cork againsttime, the graph will look something like this:
Be careful! The graph is shaped like a wave, so its temptingto try to read the wavelength from the horizontal scale... butthe horizontal scale is TIME, not length.
Cork bobs up and down
Ripples
00..22 00..66 11..00 11..22
00-33
++33DDii
ssppllaa
cceemm
eenntt
((ccmm
))
OOnnee ppeerriioodd== 00..88 ss
00..44 00..88TTiimmee ((ss))
keep it simple scienceWhat you CAN read from a Displacement-Time graph:
Amplitude The vertical scale measures thedisplacement of the cork from the equilibrium position(i.e. the flat water surface).So,
at 0 sec, the cork was in the equilibrium position.at 0.2 sec, it was 3cm upwards... at 0.4 sec, it was back at equilibrium... and so on.
Its maximum displacement was 3cm either above or below(d= -3cm) equilibrium, so the Amplitude = 3cm (0.03m)
Period Since the horizontal scale is time, you caneasily read from the graph how long it takes for onecomplete up-and-down cycle. On this graph T = 0.8s
From Period, calculate Frequency: f = 1 / T= 1 / 0.8= 1.25Hz
If the speed of the wave was known, then you couldcalculate the wavelength, or vice versa.
e.g. if the ripples are 0.45m apart: (i.e. = 0.45m)V = f x
= 1.25 x 0.45So, velocity = 0.56 ms-1
Graphing a Longitudinal WaveYou might think these Displacement-Time graphs wouldnt work for a Longitudinal
wave where the particles vibrate back-and-forth rather than up-and-down.However, the graph of a longitudinal wave can be exactly the same... you just have to
realise that the displacement is sideways displacement from the equilibriumposition, instead of up-down displacement.
Amplitude, Period and Frequency can all be determined in exactly the same way.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 9 Usage & copying is permitted according to the Site Licence Conditions only
LongerWavelength
LowerFrequency
You may have carried out a First Hand Investigation inclass to see how a change in Frequency (at constantvelocity) affects the wavelength. Maybe you used a slinkyspring, or watched the water waves in a ripple tank.
You would have found...
INCREASING DECREASE inthe FREQUENCY WAVELENGTH
and
DECREASING INCREASE inthe FREQUENCY WAVELENGTH
(If VELOCITY is the same)
keep it simple scienceRelationship Between Wavelength & Frequency
ShorterWavelength
HigherFrequency
To have the same speed, theshorter waves must vibrate at a
higher frequency
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 10 Usage & copying is permitted according to the Site Licence Conditions only
Activity 1The following activity might be completed by class discussion,
or your teacher may have paper copies for you to do.
WAVES Student Name .................................1. What is the difference between:a) a mechanical wave and an electromagnetic (EM) wave?
b) a pulse wave and a periodic wave?
c) a transverse wave and a longitudinal wave?
2. These 2 waves are sketched to the same scale and they travel at the same speed.
Which wave (P or Q) has the:a) longer wavelength?b) larger amplitude?c) higher frequency?d) longer period?
keep it simple science
Wave P
Wave Q
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 11 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Sound WavesSound waves are Mechanical (they need a medium)
and Longitudinal (vibrate back-and-forth in the line of the energy flow)
SOUND Energy movesWAVES
Particles vibrate
Instead of crests and troughs, a series of compressions andrarefactions pass through the medium as a sound travels. The atomsand molecules are alternately squashed together and then stretchedapart as the energy flows through.
In a compression the air pressure is higher, and lower in a rarefaction.
Velocity of SoundSound travels at different speeds in different mediums.
In air, sound travels at about 330-350ms-1, (about 1,200 km/hr)depending on temperature and density.
The denser the air, the slower the speed of sound.
In liquids and solids, sound travels much faster......about 1,500ms-1 in water...about 5,000ms-1 in most metals.
FREQUENCY = PITCHWhen you hear sounds of different pitch that is the way your braininterprets sound waves of different frequency.
Low Frequency = Low Pitch High Frequency = High Pitch
AMPLITUDE = LOUDNESS or VOLUMESound waves with different amplitudes are interpreted by your brain assounds of different loudness or volume.
Larger Amplitude = Louder Sound Smaller Amplitude = Quieter Sound
2. THE PROPERTIES OF SOUND WAVES
Sound Travels
CCoommpprreessssiioonn CCoommpprreessssiioonnRRaarreeffaaccttiioonn RRaarreeffaaccttiioonn
CCoommpprreessssiioonnss.. HHiigghheerr aaiirr pprreessssuurree
RRaarreeffaaccttiioonn.. LLoowweerr pprreessssuurreeDDiisspp
llaaccee
mmeenn
tt ffrroo
mmtthh
ee eeqq
uuiilliibb
rriiuumm
TTiimmee
The back-and-forth vibration of the mediumproduces a typical waveshape if graphed.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 12 Usage & copying is permitted according to the Site Licence Conditions only
ECHOES ...ECHOES ...ECHOESLike all waves, sound can travel through a medium like air,strike another medium (say, a brick wall) and bounce back. The REFLECTED wave will be heard as an echo.
Some animals can send out sound waves and pick up theechoes to help locate their prey, or to navigate, inenvironments where they cant see very well, such as murkywater (dolphin), or in darkness (bat).
SSqquueeaakkss ooff ssoouunndd
EEcchhooeess ffrroomm iinnsseecctt
SONAR SOund Navigation And Ranging
BAT
Humans have invented SONARtechnologies for things such asdepth sounding and detecting
underwater objects... fish orsubmarines, it all works the
same way.
USES OFSONAR The time delay between sending asound ping and receiving the echo,
gives depth and distance
AAnnttii-SSuubbmmaarriinneeWWaarrffaarree
DDeepptthhSSoouunnddiinngg
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 13 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
However, if the waves are out of phase (forexample, if compression coincided withrarefaction) then there is destructiveinterference... the opposite amplitudes maycancel each other out.
Theoretically, if 2 sound waves had the sameamplitude and were perfectly out of phasethey could cancel out totally... imagine having2 sounds that add up to SILENCE! (or 2 lights that combine to form DARKNESS!)
In practice, this only happens over shortdistances or time periods to give interferencepatterns and beat sounds.
AAdddd ppoossiittiivvee &&nneeggaattiivvee ddiissppllaacceemmeennttss
aatt tthhee cciirrcclleedd ppooiinnttss wave A
wave BDisp
lace
men
t
Resultant
The Principle of SuperpositionAll waves have the ability to pass through other waves withoutbeing affected. For example, you could shine a red spotlightacross a beam of blue light, each colour and beam will emergeon the other side exactly the same.
However, for the instant that the 2 waves are superimposedupon each other, they do interact and interfer with each other.
Very simply, the displacement of the two waves add together atevery point where the waves coincide.
In this case, the waves A&B were in phase (crest co-incidedwith crest, trough with trough) so the result was constructiveinterference... the resultant has an amplitude which is the sumof A+B.
TToo ffiinndd aarreessuullttaanntt,, aadddd tthheeddiissppllaacceemmeennttss ooffAA&&BB aatt ccoonnvveenniieenntt
ppooiinnttss ((cciirrcclleedd))
DDiisspp
llaaccee
mmeenn
tt
resultant A+B
wave Awave B
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 14 Usage & copying is permitted according to the Site Licence Conditions only
Activity 2The following activity might be completed by class discussion,
or your teacher may have paper copies for you to do.
SOUND WAVES Student Name .................................1. Describe a sound wave using 2 technical words.
2.a) If you listened to sound waves of different frequency,how would they sound different?b) If you listened to sound waves of different amplitude,how would they sound different?
3. What does SONAR stand for? Outline how it works
4. For each pair of graphed waves, use the Principle of Superposition to sketchthe graph of the resultant wave. Describe the type of interference in eachcase.
keep it simple science
DDiisspp
llaaccee
mmeenn
tt wave Awave B
wave C
wave DDis
plac
emen
t
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 15 Usage & copying is permitted according to the Site Licence Conditions only
EM WavesElectromagnetic waves are Transverse waves which do NOT requirea medium to travel through. They travel through a vacuum at3.00x108ms-1, the speed of light. They can travel through manyother substances at slightly slower speed. For example, light cantravel through glass or water at speeds of around 2.5x108ms-1. In air,the speed is so close to the speed in a vacuum that, for simplicity,(K.I.S.S. Principle) we take it to be the same.
EM radiation does not require a medium because the waves propagate asvibrations of electric and magnetic fields, not as vibrating particles.
MEMBERS OF THE EM SPECTRUMRadio (and TV) waves
microwaves
infra-red (heat radiation)
visible LIGHT
ultra-violet
X-rays
Gamma rays
Although we tend to think of these as 7 different types of radiation,you must realise that they are really all the same thing, just atdifferent wavelengths and frequencies.
3. ELECTROMAGNETIC WAVES
Wav
elen
gth
decr
easi
ngve
ry s
hort
v.lo
ng
Freq
uenc
y in
crea
sing
very
hig
hlo
w
Production of EM WavesAll EM waves are produced inbasically the same way: vibration oroscillation of electrically chargedparticles.
For example....Radio waves are produced by electriccurrents running back-and-forth in aconducting wire.
Infra-red waves are made by moleculesvibrating rapidly because of the heatenergy they contain.
Light is emitted when electrons rapidlyjump down from a higher to a lowerorbit around an atom.
Gamma waves come from thevibrations of charged particles withinan atomic nucleus, during a nuclearreaction in the atom.
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 16 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Just as all EM waves are produced in the same basic way, they areall received or detected in the same basic way too... by a phenomenon called Resonance. When waves strikesomething and are absorbed, they may cause sympatheticvibrations within it.
In cartoons and the movies (not inreal life) the opera singer hits ahigh note and all the wine glassesbegin to vibrate and then shatter...a fictional example of resonance.
Some real examples...
When radio waves hit a suitable aerialwire or antenna, they cause some
electrons in the metal to oscillate back-and-forth in sympathy with the wave.
These oscillations are amplifiedelectronically and the signal converted
to sound in the speaker, allowing you tolisten to the radio.
When the fatlady sings...
Antenna
Detection & Reception of EM Waves
When infra-red waves hityour skin they cause certain
molecules to begin toresonate and vibrate. This
sets off nerve messages tothe brain and you feel
warmth or heaton your skin.
In a film camera the light causes resonance inchemicals in the film. Chemical reactions occurwhich permanently alter the film so that animage appears when developed later.
Different film can besensitive to infra-red,(photos in the dark)or X-rays for medicaluses.
All waves are detected when they causeresonance vibrations.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 17 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
A little UV gives you a suntan, but long-term exposureleads to skin damage, premature skin ageing, and isa major cause of deadly melanoma skin cancer.
The Sun produces dangerous quantities of UVradiation, but luckily most of it is absorbed by theozone layer in the upper atmosphere of the Earth.
EEaarrtthhss ssuurrffaaccee
SSuunn
ozzone
layyer
uuppppeerr aattmmoosspphheerree
XX-rraayy && ggaammmmaa
UUVV
ssoommeerreefflleecctteedd
rraaddiiooiinnffrraarreedd && lliigghhtt
Danger of High Frequency EM WavesHigh frequency EM waves (ultra-violet, X-ray & gamma) can be very dangerous to living things.
Ozone is a form of oxygen which has 3 atoms permolecule (O3) instead of the normal 2 (O2).
The ozone moleculesresonate well at the frequency of UV and so absorb it strongly.
The Sun only produces smallamounts of the even more dangerousX-rays and gamma radiation. Onceagain, most is absorbed in the upperatmosphere, this time by ordinary oxygen and nitrogengases.
Infra-red and light radiation penetrate well, (althoughabout 30% is reflected) and while some radio frequenciesget through, many get absorbed or reflected.
UV RaysOxygen O22does not
Absorb UV
Ozone O33Absorbs UV
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 18 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple scienceThe Inverse Square Law
As any form of radiation spreads out from its source its intensity gets less. For example, a sound becomes quieter if youre further from the source,
or a light is not so bright as you move further from it.At distance d from the light source, some lightenergy falls on an area of x2 units. At twice thatdistance (2d) the same amount of light would fallon an area of 4x2. The brightness of the light mustbe only 1/4 as much (since the same amount oflight is falling on 4 times the area.)
So,twice the distance 1/4 as bright
3 times the distance 1/9 as bright
10 times the distance 1/100 as bright
...or if you move closer it will getter brighter:at half the distance, 4 times brighter.at 1/3 the distance, 9 times brighter
...and so on.
Notice how the brightness (intensity) changes inproportion to the distance squared, in each case.
Mathematically, the relationship is that the intensity (I) (suchas brightness of light) is inversely proportional to theSQUARE of the distance (d) from which it is viewed.
This diagram explains why:
Intensity 1 (distance)2
I 1 d2
meansproportional
to
xx
lliigghhttssoouurrccee
ddiissttaannccee dd
ddiissttaancee
22dd
22xxSSqquuaarree
AArreeaa xx2
SSqquuaarree wwiitthhssiiddeess ttwwiiccee aasslloonngg..
AArreeaa == 44xx2
SSaammee aammoouunnttooff lliigghhtt ffaallllssoonn 44 ttiimmeesstthhee aarreeaa
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 19 Usage & copying is permitted according to the Site Licence Conditions only
Activity 3The following activity might be completed by class discussion,
or your teacher may have paper copies for you to do.
ELECTROMAGNETIC WAVES Student Name .................................1. List, in order of increasing frequency, the main types of EM wave.
2.a) Outline the general way that all EM waves are produced.
b) Outline the general way that all waves are received or detected.
3.a) Which 3 forms of EM radiation are dangerous to living things?
b) What is ozone? Where is the ozone layer? Why is it important to life on Earth?
4. When measured from a distance of 2 metres, the intensity of a light bulb wasfound to be 16 units. What intensity would be measured at a distance of:a) 4 metres?b) 8 metres?c) 1 metre?
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 20
Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Radio & Microwaves carry radioand TV broadcasts, telephone long-distance links, mobile phonenetworks, and satellite links fortelephone (including internet) and TV.
If you have Satellite TV, the dishon your roof is an antenna to receivemicrowaves directly from an orbitingsatellite.
Add to that, 2-way radio for militaryuses, CB amateurs and boating,shipping and aircraft communications,and you begin to realise how manyradio waves are zapping around.
Whats special about LASER LIGHT?
It is one, pure frequency of light.
The waves are all in phase and so theyinterfere constructively to form a veryintense, tight beam.
A laser beam will stay inside an opticalfibre and not leak out or dissipate forlong distances.
A laser can be turned on & off veryrapidly, so its perfect for high speeddigital communication.
EM Waves & CommunicationHumans rely on sound waves for communicating by direct speech, but all our modern communication technologies rely on EM waves.
Light is being increasingly used in the formof LASER beams carried in opticalfibres for telephone and internetcommunication.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au Slide 21 Usage & copying is permitted according to the
Site Licence Conditions only
keep it simple science
How a Wave Carries InformationHow can a voice or piece of music be carried by a wave? The key feature is Modulation of the
wave. There are 3 common ways to modulate the wave to carry information...
Frequency Modulation (FM)The amplitude stays constant while the
frequency (and wavelength) varywithin a fixed range. The information(voice, music etc) is coded in the
variations of frequency.
FM radio gives much better fidelity andis superior, compared to AM, for the
quality of sound (eg for music)received.
Amplitude Modulation (AM)The frequency (and wavelength) of the
wave stays constant while the amplitude varies.
The changing amplitude codes for theinformation being carried... whether
voice or music, or whatever.
DDiiggiittaallssiiggnnaall
DDiiggiittaall 11 00 11 11 00 11ddaattaa
WWaavvee ppuullsseessoonn aanndd ooffff
This diagram compares the effect of AM, FM & Digital Modulation
on the same carrier wave
WAVEMODULATION
Pulse Modulation(Digital)
To carry information in digital form thewave must switch rapidly between 2
different states, representing the 1 and0 of digital codes. The wave can beswitched rapidly on and off (as in thediagram) or switched back-and-forthbetween different phase states...
phase modulation.
OpticalFibres carry PulseModulatedlaser beams
CCaarrrriieerrwwaavvee
NNooiinnffoorrmmaattiioonnccaarrrriieedd
AAMMssiiggnnaall
AAmmpplliittuuddeecchhaannggeess..FFrreeqquueennccyyccoonnssttaanntt
FFMMssiiggnnaall
FFrreeqq.. cchhaannggeess..AAmmpp..ccoonnssttaanntt
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 22 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple scienceCase Study: MOBILE (CELL) PHONESWhen you use a mobile phone, the sound of your voicegoes into a microphone and instantly pops out the otherend into your friends ear. What happens in between?
1. The SOUND energy ofyour voice is convertedto ELECTRICAL signalsby the microphone. Theelectrical signal is usedto digitally modulate a
RADIO wave.
2. The digital RADIOsignal is
transmitted byyour phone
and receivedby the local
cell antenna.
3. If your call is going to aperson in another location (adifferent cell) the signal isconverted into a modulated
MICROWAVE and beamed, viahilltop relay towers, to the
correct area. (Alternatively, it might be sentas a modulated Laser LIGHTbeam through optical fibres).
4. In the other cellarea, the signal is
converted back to amodulated RADIO
signal andtransmitted.
SOUND ELECTRICITY RADIO MICROWAVE RADIO SOUND(or LASER LIGHT)
ENERGY CHANGES
5. Your friendsphone receives
the RADIO signal,amplifies it as an
ELECTRICALsignal and this is
converted toSOUND waves intheir earphone.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 23 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
In the future we will need to switchmore communications to use thelaser light & optical fibre methodwherever possible, and to makebetter use of the RF bands. Forexample, it is possible to use thesame frequency channel forseveral different purposes as long asthe different signals are modulateddifferently and as long as the radioreceivers are sophisticated enoughto pick out only the desired signaland ignore the others.
One thing is for sure... humans willkeep communicating and the needfor new services will keepexpanding. So far, our technologyhas always managed to keep up, andit will probably continue to do so.
Modern communication systems have developedrapidly and new features and capabilities seem tocome out every day. It seems that the entiresystem is unlimited and that it can continue toexpand and improve forever.
Well perhaps it can, but NOT while continuing touse the radio end of the EMR spectrum. Eachstation or channel must operate on a differentfrequency or else signals can jam or interferewith each other.
The simple fact is that there are now so manyradio & TV stations, mobile phone networks,aircraft and shipping channels, military, policeand emergency service channels, etc. etc. allusing the RF (Radio Frequency) part of the EMRspectrum, that it is becoming difficult to keepexpanding services without interfering withexisting channels.
Discussion:LIMITATIONS OF COMMUNICATION CHANNELS
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 24 Usage & copying is permitted according to the Site Licence Conditions only
Activity 4The following activity might be completed by class discussion,
or your teacher may have paper copies for you to do.
EM WAVES & COMMUNICATION Student Name ........................1. To carry information, waves need to be modulated in some way.Name the 3 common ways that signals are modulated and outline each.
2. Use a simple energy change diagram to describe the energy changesoccurring during a mobile phone call.
3. Generally, the higher the frequency of a wave the more data and informationcan be carried.
a) Relate this fact to the increasing use of microwaves and lasers incommunication.
b) The lasers used in communication consist of light rays which we perceive asred in colour. Communication engineers are very keen to develop blue-lightlasers. Why?
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 25
Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
When a Wave Hits a BoundaryWhen a wave is travelling through one medium and thenstrikes a different medium, one of 3 things can happen atthe boundary:
It is quite possible that all 3 things can happen at once. Forexample, if a beam of light is travelling through air, andthen strikes a glass window: the glass ABSORBS some of the light. some REFLECTS off the glass some is TRANSMITTED through the glass.
4. REFLECTION & REFRACTION
Example: Light waves travelling in air, then hitting glass.
AAbbssoorrbbeedd eenneerrggyybbeeccoommeess hheeaatt
ABSORPTION ofthe energy
REFLECTION(bounces off)
TRANSMISSION into thenew medium, with possible
REFRACTION(change of direction)
ReflectionThe Law of Reflection is very simple:Whatever angle a ray of light hits the surface, it willbounce off again at the same angle.
OR, more technically:
Angle of = Angle ofIncidence Reflection
io = ro
The trickiest bit is how the angles are measured. They mustbe measured between the rays and the NORMAL... animaginary line at right angles to the surface.
What if the Surface Isnt Flat?The Law of Reflection is still obeyed, as shown:
Normalline
IInncciiddeenntt rraayy
RReefflleecctt
eedd
rraayy
iooroo
Reflectivesurface
such as amirror
The Incident rays P,Q & R are parallel.
Each obeys the Law of Reflection, but thereflected rays go in different directions.
The Normal for each ray is a dotted line.
P QR
Uneven, rough surfaces dont give shiny reflections because the light is scattered in all directions.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 26 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Concave mirrors (go in like a CAVE) reflectlight to a Focus, or focal point.
Concave mirrors can give ENLARGED images ifviewed from the right distance, such as ahousehold shaving mirror or make-up mirror,which gives a magnified reflection of your face.This is also the basis of a reflecting telescopeswhich is the main type used in Astronomy.
Focus
Reflection of Light from Curved MirrorsConvex mirrors reflect light so the raysdiverge outwards, as if coming from a focusbehind the mirror.
Convex mirrors produce smaller (diminished)images, but give a wider-angle view. An exampleof use is the side mirrors on a car which giveyou a wide-angle view into the drivers blind-spot. (BUT things look smaller. This canconfuse a driver into thinking that other cars arefurther away.)
VirtualFocus
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 27 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Wave reflection from the ionosphere can help withlong distance radio communications. It worksbest with the longer wavelength AM signals.
The Ionosphere is a zone in the upper atmospherewhere the air molecules are partly ionised(electrically charged) by radiations from the Sun.The ionised gases act as a reflective surface toradio waves of certain wavelengths.
TV signals and FM (shorter wavelengths) radio donot reflect so well and generally you need to be inline of sight from the transmitter to get goodreception.
Transmitter
Ionnosspphheerreellaayyeerr
Receiver
EARTH
Another example involves howMicrowaves are transmitted andreceived. Microwaves are used torelay TV programs to regionaltransmitters and to relay longdistance phone calls (includinginternet) from city to city.
At the transmission end, a curvedreflector keeps the waves in a tightbeam aimed at the next relaystation. The receiver has a similardish to focus the waves into the receiving antenna.
MMiiccrroowwaavveebbeeaamm ttrraavveellssbbeettwweeeenn rreellaayy
ssttaattiioonnss
YYoouurr ssaatteelllliittee TTVV ddiisshh iiss aa rreefflleeccttoorr ttoooo
Microwave Reflector Dishes
TTrraannssmmiitttteerrddiisshh
RReecceeiivveerrddiisshh
Reflections in Communications
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 28 Usage & copying is permitted according to the Site Licence Conditions only
When going from a more dense, to a less densemedium the opposite changes occur.
The velocity increases: wave speeds up The wavelength gets longer. Wave refracts away from the normal.
In this case,
io < ro
ioro
Incident Ray Glass Air
Refracted Ray
nnoorrmmaall
RefractionRefraction occurs when waves enter a new medium. The waves change their speed and
their wavelength and, depending on the angle of incidence, may change direction.All waves can undergo refraction, but here we will concentrate entirely on light waves.
When a light wave enters a more dense medium:(Example: going from air into glass)
The velocity slows. The wavelength gets shorter. The beam changes direction towards the normal.
io > roio
ro
Incident Ray
Refracted Ray
Air Glass
nnoorrmmaall
When a light ray refracts, its wavelength changes, but frequency stays the same. Since COLOUR is determined by frequency, there is no colour change during refraction.
Angle ofIncidence
Angle ofRefraction
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 29
Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
You may have carried out an investigation in classusing a Ray Box Kit to measure angles ofincidence and angles of refraction of light rayspassing into a glass block.
When you graph the angles the result is a curve.
This is not much use for defining any relationshipthat may exist.
Angle of refraction, roo
Angl
e of
inc
iden
ce, i
oo
Snells Law In 1621, Willebrord Snell discovered that if yougraph the Sine ratios of the angles, the points lie ina straight line. You may have done the same withyour experimental data.
The fact that its a straight line means there is a directrelationshipbetween Sin i and Sin r.
The gradient of the line is not only the ratio between the Sine of the angles, but is alsoequal to the ratio of velocities of the wave in the 2mediums involved.
This special ratio is known as theREFRACTIVE INDEX (n)
This is now called Snells Law:
Sin roo
Sin
ioo
GGrraaddiiee
nntt == rriiss
ee == SSiinn
ii
rruunn
SSiinn rr
Sine (angle incidence) = velocity (medium 1) = nSine (angle refraction) velocity(medium 2)
Sin i = V1 = 1n2Sin r V2
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 30 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
When waves enter a new medium, and then exit it again, therefractions that occur on the way in, are the opposite of whathappens on the way out.
For example, this light ray goes from air, into glass and outinto air again.
Refractive Index(air -> glass) ang = sin45 / sin28 = 1.5and
Refractive Index(glass -> air) gna = sin28 / sin45 = 0.66These 2 values are RECIPROCALS !! ...and this will alwaysbe the case... the index of refraction going in is the reciprocalof the index coming out.
1n2 = 1 2n1
The spoonappears brokenat the surface ofthe tea due to
refraction of thelight by which
we see it.
45oo
45oo
28oo
28ooRefractionair ->> glass
Refractionglass ->> air
nnoorrmmaall
glass
3 beams of light being refracted through a perspex block.
Refractive Index
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 31 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
Snells Law Sin i = V1 = 1n2Sin r V2
Example ProblemA beam of light goes from air into a glass block with a refractive index of 1.50.The angle of incidence is 35o.a) Find the angle of refraction.b) If light travels in air at 3.00x108 ms-1, find the velocity in the glass.
Solution a) Sin i = n sin 35 / sin r = 1.50
Sin r sin r = sin 35 /1.50 = 0.38238
therefore, angle of refraction, r = 22.5o
b) V1 = n 3.00x108 / V2 = 1.50V2
V2 = 3.00x108 / 1.50therefore, velocity in glass, V = 2.00x108 ms-1
Snells Law Calculations
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 32 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
This means that the Sine Ratio of the critical angle C isequal to the reciprocal of the refractive index of the glass.
Total Internal Reflection & the Critical Angle
There comes an angle of incidence (called theCritical Angle) where the angle of refraction = 90o.At this point the refracted ray runs along the edge ofthe glass, but does not cross the boundary.
So, when the angle of incidence equals the criticalangle, the angle of refraction is a right angle.
If io = co, then ro= 90o
Remember that Sin i = gna Sin r
so at the critical angle Sin c = gna
Sin 90
and sin 90o = 1, so...
Consider the situation when waves are going froma more dense medium into a less dense medium,such as light going from glass into air.
The waves refract away from the normal.
Now think about increasing theincident angle as shown in this
series of diagrams. ioo
roo
1
ggllaassss
aaiirr
iooroo
2
bigger i,bigger r
ioo=cooroo= 90oo
3
CCrriittiiccaall AAnnggllee
Sin c = gna = 1 1 ang
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 33 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
At incident angles larger than c, the ray reflectsback inside the glass... this is called
TOTAL INTERNAL REFLECTION
This has one very important application incommunication technology...
Optical fibres are thin strands of very pure glassthat can carry communications signals in the formof laser light beams. The laser beams stay withinthe fibres because of total internal reflection.
If ioo > coothe ray cannot get out.It reflects back inside
the glass.ioo>coo
Rayreflectsinsideglass
4
What Happens Beyond the Critical Angle?
This diagramfollows onfrom theprevious
slide.
Each fibre is a core strand of glass, with anotherlayer wrapped around it. The outer layer has alower refractive index than the core, so even wherethe fibre bends around a corner, the laser light willgenerally strike the boundary at an incident anglegreater than the critical angle.
Whenever the laser beam hits the boundarybetween the 2 layers, the angle of incidenceexceeds the critical angle, (io > co) so Total InternalReflection occurs and the beam stays totally withinthe fibres over long distances.
The laser light bounces aroundcorners by total internal reflection
Optical fibrellaasseerr bbeeaamm
Lower indexouter layer.
Core.High index.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 34 Usage & copying is permitted according to the Site Licence Conditions only
Activity 5The following activity might be completed by class discussion,
or your teacher may have paper copies for you to do.
REFLECTION & REFRACTION Student Name .................................1. List the 3 possible things that can happen when a wave strikes a boundarybetween 2 different media, such as when light strikes a piece of glass.
2.a) Which shape of curved mirror can give enlarged images?b) Outline a use for the opposite shape of mirror.
3. List the changes which can occur to a light wave as it travels from air into adenser medium such as water or glass.
4. (fill in the blank spaces) Refractive index can be measured as the ratiobetween ..................................... of the angles of ............................. and.........................., OR as the ratio between the .............................. of light in eachmedium. The index for light entering a medium is the ............................... of theindex for light exiting from the medium.
5.a) What is the critical angle for refraction as light exits from a denser medium?
b) Under what conditions does total internal reflection occur?
keep it simple science
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 35 Usage & copying is permitted according to the Site Licence Conditions only
Digital TechnologyIn the past 20-30 years our society has become more andmore digitised. Because of the speed, storage capacityand processing ability of computers, almost every aspect ofour society has gone digital.
This simply means that all information(data) whether it be a persons voice,written words, numbers, music, photos,etc. is converted into digital code forprocessing, storage or transmission andcommunication.
5. DIGITAL COMMUNICATION & DATA STORAGEkeep it simple science
A simple list of some of the technologies involved is:
CDs & DVDs,Mobile phones, Digital cameras,
Computers & Internet, MP3 music,
ATMsGPS
Increasingly, WAVES are involved in thesetechnologies, especially when data is movedaround... COMMUNICATION.
KCiC Physics 1 World Communicatescopyright 2009 keep it simple sciencewww.keepitsimplescience.com.au
Slide 36 Usage & copying is permitted according to the Site Licence Conditions only
keep it simple science
GPS is a system that allows a ship, aircraft, car or abushwalker, to locate their exact position anywhere onEarth instantly and continuously.
The system was developed for miltary uses, but then madeavailable to anyone. The military version is thought to beaccurate to within a metre, the civilian version to withinabout 10 m.
The system is based on a fleet of 32 satellites (controlledby the US Air Force) positioned in orbit so that fromanywhere onEarth, at anymoment, severalsatellites are inline of sight.
Each satelliteconstantly sendsout microwavesignals identifyingitself, its orbitdetails and theprecise time thesignal was sent.
TECHNOLOGY CASE STUDY: GLOBAL POSITIONING SYSTEM (GPS)
GPS
By doing the same for 2 other satellites, the GPS unitrapidly triangulates the signals from 3 satellites to pin-point your location on the Earths surface. (Aircraft need a4th signal to get their altitude)
GPS systems for cars show your position on a screenoverlaid onto a road map of the area. As you drive around,the system constantly shows your changing position, andcan advise you where to turn to reach your destination.
When yourportable GPSreceiver picks upthe signal, it cancalculate yourexact distancefrom the satellite,from the timedelay since thesignal was sent.
Satellite orbitsSatellite 1
SSaatteelllliittee 22
Satellite 3
GGPPSS rreecceeiivveerr
Earth
Top Related