Catalyst Products Manual
PROFESSION MAKES GOOD RESULTS
YOU ARE WELCOME TO VISIT OUR NEW PLANT !
WUXI HONOR SHINE CHEMICAL CO,LTD
2015.3.7
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
Contents
1. Hydrogenation catalyst series
1.1 GHT-22 hydrofining catalyst
GHT-23 hydrotreating guard assistant
GHT-12 hydrofining catalyst of dry gas
1.2 GCJ-43 activity proppant
1.3 GFB-72 dearsenide agent
1.4 GJS-81 catalyst for residues hydrometallization
1.5 GJN-61 hydrodewaxing catalyst
2. Noble metal catalyst
2.1 FR-20 semi-regeneration catalyst
2.2 CZ-100 CCR catalyst
3. Isomerization catalyst
3.1 YG-10 C5C6 isomerization catalyst
4. Purifying agent additives series
4.1 GDS-B desulfurizer
4.2 GTAs-41 dearsenide agent
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
5. Catalyst ex-situ regeneration
5.1 ex-situ regeneration of hydrogenation catalyst
1. Hydrogenation catalyst series
1.1
GHT-22 HYDROFINING CATALYST
★ Product features
GHT-22 catalyst use modified Al2O3 as carrier, take Tungsten、nickel and additives as
active component, is a new hydrofining catalyst with advanced production methods, has the
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
following features:
※ Lower bulk density and high crushing strength
※ The group matched is reasonable
※ Appropriate acid performance
※ Good activity and stability, especially olefin saturation performance.
※ Good regeneration performance
★ Physical and chemical properties of product
Name GHT-22
Appearance Trifolium
Specification, mm Ф1.6*3~8
Surface area, m2/g ≥180
Pore volume, ml/g 0.50~0.60
Bulk density, g/ml ≥0.78
Crushing strength, N/cm ≥180
WO3, m% ≥19.0
NiO, m% ≥2.0
★ Application range
Suitable for hydrogenation of straight-run naphtha、coking gasloine、FCC
and pyrolysis gasoline, removing sulfur and nitrogen in the raw material and olefin saturation,
also can be used in regeneration. GHT-22 has excellent function of desulfurization and
denitrification, has the olefin saturation function at the same time, it can be used alone, if use
GHT-21/GHT-22 two-stage loading process, can make the olefin
saturation、desulfurization、denitrification achieve the best reaction effect.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
★ Precautions for storage and use
※ Pay attention to waterproof、moistureproof, prevent other chemicals pollution.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
※ Should operate strictly in accordance with the instructions of GHT series catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
GHT-23 HYDROTREATING GUARD ASSISTANT
★ Product features
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
GHT-23 catalyst use modified Al2O3 as carrier, take Tungsten、 nickel as active
component, is a new hydrotreating guard assistant, has the following features:
※ High crushing strength and large particles
※ Big pore diameter and pore volume
※ Carbon deposition rate is slow, good activity and stability.
★ Physical and chemical properties of product
Name GHT-23
Appearance Cylinder
Specification, mm Ф4.0~4.5
Bulk density, g/ml ≥0.80
Crushing strength, N/cm ≥250
NiO, m% ≥1.0
WO3, m% ≥5.50
★ Application range
Mainly used for the hydrogenation of gasoline and diesel with low pressure, diene in
raw material is saturated and a small amount of residual carbon and residual iron are
deposited, prevent the coking at the top of hydrofining catalyst bed, in order to protect
hydrofining catalyst, make the unit normal operation. Especially suitable for front bed to
protect the main catalyst downstream.
★ Product packing
Special fiber drum packing, inner put double plastic bag, net weight 30 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、moistureproof, prevent other chemicals pollution.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
GHT-12 HYDROFINING CATALYST OF DRY GAS
★ Product features
※ For GHT-12 hydrofining catalyst, r-Al2O3 as the carrier, tungsten、nickel and additives
as the active component. The catalyst has good activity for olefins and organic sulfur
hydrogenation under low temperature. Especially the preformance of
desulphurization、denitrification at low temperature is more outstanding, can make the
catalytic dry gas、 coking dry gas or the mixed dry gas hydrofining, fully meet the
requirement of hydrogen production process.
※ Good adaptation, can apply to three processes eg. refinery dry gas gasoline and diesel
adsorption hydrogenation、 circulating adiabatic bed and isothermal adiabatic bed
hydrogenation.
※ Good resist carbon ability、regeneration performance and long life time.
★ Physical and chemical properties of product
Name GHT-12
Appearance Trifolium
Specification, mm Ф1.6~2.0
Pore volume 0.50~0.60
Surface area, m2/g ≥180
Bulk density, g/ml ≥0.72
Crushing strength, N/cm ≥150
NiO, m% ≥1.7Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
WO3, m% ≥15.0
★ Application range
Suitable for the hydrogenation saturated transformation of organic sulfide、nitride and
around 20% unsaturated hydrocarbon in natural gas、 liquefied petroleum gas、coking
dry gas、catalytic dry gas、atmospheric gas、 low pressure gas of hydrogenation unit,
also can be regenerated to use. GHT-12 hydrofining catalyst can be used alone. If use
GHT-11/GHT-12 secondary loading process, can make the olefin
saturation、desulfurization、denitrification reach to the best reaction effect.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、moistureproof, prevent other chemical pollution.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
※ Should operate strictly in accordance with the instructions of GHT series catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
1.2 GCJ-43 ACTIVITY PROPPANT
★ Product features
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
GCJ-43 activity proppant use the big pore r-Al2O3 tabletting as the carrier,
tungsten、nickel as the main component, it is a new hydrogenation protective agent. The
characteristics are as follow:
※ High crush strength、big particle.
※ High content of active component, good activity and stability.
※ Low carbon deposited rate and long life time.
★ Physical and chemical properties of product
Name GCJ-43
Appearance Cylinder
Specification, mm Ф4.0~4.5
Crushing strength, N/cm ≥180
Bulk density, g/ml ≥0.70
WO3, m% ≥12.0
NiO, m% ≥1.0
★ Application range
Mainly used in the medium and high pressure hydrogenation of middle distillate oil and
heavy oil, saturate the diolefin of raw material oil and deposit a small amount of
colloid、asphaltene、impurities suan as residual carbon and residual iron, prevent coking
of hydrogenation conversion catalyst at the top of bed layer, result in the reaction pressure
increase, so as to protect the hydrogenation conversion catalyst, and make the unit normal
operation. Especially suitable for protecting the main catalyst downstream as praevia bed
layer.
★ Product packing
Special fribe drum packing, inner put double plastic bag, net weight 25 kg / barrel.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
★ Precautions for storage and use
※ Pay attention to waterproof、moistureproof, prevent other chemical pollution.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
1.3 GFB-72 DEARSENIDE AGENT
★ Product features
GFB-72 catalyst use Al2O3 with large pore volume, loaded modified metal, is a new
hydrotreating catalyst.
※ Excellent hydrogenation activity of single and double loop aromatics, high saturation
level.
※ Good desulfurization and denitrogenation and isomerization performance.
※ Good regeneration performance.
★ Physical and chemical properties of product
Name GFB-72
Appearance Cylinder
Specification, mm Ф4.0~4.5
Pore volume, ml/g 0.7~0.8
Surface area, m2/g ≥150
Bulk density, g/ml 0.60~0.68
Crushing strength, N/cm ≥80
MoO3, m% ≥20
NiO, m% ≥7
★ Application range
Suitable for hydrotreating process of middle distillate oil, especially suitable for
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
aromatic depth saturation hydrogenation and isomerization reaction.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、 moistureproof, it is forbidden to contact with other
chemicals and hydrocarbons.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
※ Should operate strictly in accordance with the instructions of GFB series catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
1.4 GJS-81 CATALYST FOR RESIDUES
HYDROMETALLIZATION
★ Product features
GJS-81 catalyst, use macroporous alumina carrier, has bigger pore volume and pore
diameter. Catalyst has following features:
※ Good hold-metal ability, high hydrometaillization rate(metal just as vanadium、Nickel
and others).
※ Good hold-carbon ability, high decarbonization residual rate.
※ Slow down the catalyst deactivation, long cycle for use.
★ Physical and chemical properties of product
Name GJS-81
Appearance Trifolium
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
Specification, mm Ф1.2*3~8
Pore volume, ml/g 1.5~1.7
Surface area, m2/g ≥260
Medium pore diameter, NM ≥30
Crushing strength, N/cm ≥80
MoO3, m% ≥9.0
NiO, m% ≥2.0
★ Application range
Suitable for hydrometallization of heavy hydrocarbon raw
materials(including crude oil、 atmospheric or vacuum residue and atmospheric or vacuum
distillate), especially suitable for hydrometallization of vacuum residue with high metal content,
to produce the feedstock with low metal content and high added value.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、 moistureproof, it is forbidden to contact with other
chemicals and hydrocarbons.
※ Shall not throw and roll the metal bucket when carrying.
※ Should operate strictly in accordance with the instructions of GHT series catalyst when
start-up, also shall carry out under the guide of professional and technical personal in
necessary.
1.5 GJN-61 HYDRODEWAXING CATALYST
★ Product features
GJN-61 catalyst is a mixture of modified molecular and Al2O3, has the following
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
fetaures:
※ Have more strong acid, the pore volume increase, hydrogenation function and acid
function are more matches.
※ High activity and selectivity, good effect of hydrodewaxing, high diesel yield.
※ Used for the combination process of diesel hydrofining and hydrodewaxing, at the
same time of desulfurization and denitrification, increase the diesel yield, and raise the
cetane number of diesel.
★ Physical and chemical properties of product
Name GJN-61
Appearance Trifolium
Specification, mm Ф1.6*3~8
Pore volume, ml/g 0.25~0.35
Surface area, m2/g ≥270
Bulk density, g/ml 0.70~0.78
Crushing strength, N/cm ≥100
High silica zeolite, m% ≥68
NiO, m% ≥1.5
Modifier, m% ≥4.6
★ Application range
Single hydrodewaxing is suitable for the straight run diesel with good
quality of raw material and high wax content; hydrofining-hydordewaxing is suitable for the
secondary processing oil of catalytic diesel、coking diesel with poor raw material, to produce
good diesel with high quality and low solidifying point.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
※ Pay attention to waterproof、 moistureproof, it is forbidden to contact with other
chemicals and hydrocarbons.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
※ Should operate strictly in accordance with the instructions of GJN-61 catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
2. Noble metal catalyst
2.1 FR-20 SEMI-REGENERATION CATALYST
★ Product features
FR-20 reforming catalyst is a new type of semi-regeneration catalyst with advanced
production technology, has the following features:
※ Carrier phase with high purity, concentrated distribution, stable structure, high crushing
strength.
※ Compared with local industrial catalyst, has equal activity, better selectivity.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
※ Compared with local industrial catalyst, carbon deposition amount is reduced more
than 25%, can be used for a long period time.
※ Regeneration activity can be restored to the level of fresh agent.
※ The lowest platinum content in the catalyst, the catalyst cost is greatly reduced.
★ Physical and chemical properties of product
Name FR-20
Appearance Extruding
Specification, mm Ф1.6*3~8
Pore volume, ml/g 0.45~0.55
Surface area, m2/g ≥180
Bulk density, g/ml 0.72~0.76
Crushing strength, N/cm ≥100
Pt, m% 0.28±0.01
Re, m% 0.40±0.02
Cl, m% 1.30±0.30
★ Application range
Suitable for semi-regeneration fixed bed reforming unit with medium、low pressure, producing gasoline components with high octane number or chemical aromatic
products; can be used alone, also can be used mixed loading with other reforming catalyst.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、 moistureproof, it is forbidden to contact with other
chemicals and hydrocarbons.
※ Shall not throw and roll the metal bucket when carrying.
※ Delivery by oxidation state or reduction state.Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
※ Should operate strictly in accordance with the instructions of FR-20 catalyst when start-
up and regeneration, also shall carry out under the guide of professional and technical
personal in necessary.
2.2 CZ-100 CCR CATALYST
★ Product features
CZ-100 catalyst is a new type of continuous reforming catalyst with high activity and
high hydrothermal stability, has the following features:
※ Good selectivity, high liquid yield of C5+, aromatics yield and hydrogen production rate
is increased.
※ Catalyst coking rate is dropped substantially, under the condition of the same reaction
severity, the coking rate is reduced more than 20%.
※ Keep good hydrothermal stability、chlorine holding capacity and excellent mechanical
properties.
★ Physical and chemical properties of product
Name CZ-100
Appearance Spherulite
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
Specification, mm Ф1.6*3~8
Surface area, m2/g 200±20
Bulk density, g/ml 0.56±0.02
Crushing strength, N/cm 40≮Pt, m% 0.28±0.01
Sn, m% 0.32±0.03
Cl, m% 1.0~1.3
★ Application range
Suitable for the reforming process of producing high octane number
gasoline 、 aromatics and hydrogen with the raw materials just as straight-run
naphtha 、 hydrocracking heavy naphtha 、 pyrolysis gasoline and coking
gasoline、catalytic gasoline、condensate oil.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、 moistureproof, it is forbidden to contact with other
chemicals and hydrocarbons.
※ Shall not throw and roll the metal bucket when carrying.
※ Delivery by oxidation state or reduction state.
※ Should operate strictly in accordance with the instructions of CZ-100 catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
3. Isomerization catalyst
3.1 YG-10 C5C6 isomerization catalyst
★ Product features
YG-10 catalyst is a new type of isomerization catalyst with high activity and high
selectivity in low temperature, has the following features:
※ Good activity
※ Good stability
※ Little coking produced in reaction process
※ High octane number
★ Physical and chemical properties of product
Name YG-10
Appearance Trifolium
Specification, mm Ф1.6
Surface area, m2/g >180
Bulk density, g/ml 0.75~0.78
Crushing strength, N/cm 80≮Pt, m% 0.23±0.01
Cl, m% ≥5.0
★ Application range
Suitable for C5C6 light alkanes, react under the conditions of hydrogen with low
temperature 120~170 , get the C5℃ 、C6 products with high octane number.
★ Product packing
Special steel drums packing, inner put sealed bag lined with aluminum foil, net weight
130 kg / barrel.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
★ Precautions for storage and use
※ Pay attention to waterproof、 moistureproof, it is forbidden to contact with other
chemicals and hydrocarbons.
※ Shall not throw and roll the metal bucket when carrying.
※ Should operate strictly in accordance with the instructions of YG-10 catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
4. Purifying agent additives series
4.1 GDS-B DESULFURIZER
★ Product features
GDS-B catalyst is a new type of desulfueizer with high purity zinc oxide as the main
raw material, has the following fetaures:
※ Good desulfurization ability with low temperature.
※ High hold-sulfur ability.
※ Good crush strength, low attrition rate, good water resistant performance.
※ Long life.
※ Strong adaptability.
★ Physical and chemical properties of product
Name GDS-B
Appearance Trifolium
Specification, mm Ф4*6~12
Pore volume, ml/g 0.50~0.60
Surface area, m2/g ≥180
Bulk density, g/ml 1.10~1.30Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
Attrition rate, m% ≤4.5
Crushing strength, N/cm ≥50
ZnO, m% ≥95
Breakthrough sulfur capacity, m% ≥25
Saturation sulfur capacity, m% ≥35
★ Application range
Suitable for removal sulfur of natural gas、oil field gas、refinery gas and light oil, also
suitable for desulfur purification process of industial gas from synthetic
ammonia、methanol、hydrogen production and organic synthesis. For the organic sulfide
contained with more complexed composition, GDS-B desulfurizer can combine with the
nickel、 tungsten hydrofining catalyst, also can be used the protective agent for upper of
low transformation catalyst, and make the export sulfur content dropped to <0.1 ppm.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 140 kg / barrel.
★ Precautions for storage and use
※ Pay attention to waterproof、moistureproof, prevent other chemical pollution.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
※ Should operate strictly in accordance with the instructions of GDS-B catalyst when
start-up and regeneration, also shall carry out under the guide of professional and
technical personal in necessary.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
4.2 GTAs-41 DEARSENIDE AGENT
★ Product features
※ High activity, can meet the requirment of arsenic content ≤200 ppb with hydrogenation
catalyst, and arsenic content ≤1 ppb with reforming catalyst for raw material.
※ High hold-arsenic ability, about 40%.
※ High crush strength, strong ability against accidental operation.
※ Good regeneration performance, activity can rescover to fresh agent level.
★ Physical and chemical properties of product
Name GTAs-41
Appearance Cylinder
Specification, mm Ф1.5~2.0
Pore volume, ml/g ≥0.52
Surface area, m2/g ≥180
Bulk density, g/ml 0.63~0.68
Crushing strength, N/cm ≥200
★ Application range
※ Suitable for dearsenifing of gasoline、kerosene、diesel oil and their mixed distillate.
※ Suitable for hydrofining of secondary processing oil with arsenic content higher than
200ppb, so as to protect the hydrogenation catalyst.
※ Combine with reforming pre-hydrogenation catalyst, in order to protect the reforming
catalyst.
※ Can use GTAs-41 to pre-dearsenide when the arsenic content is higher in producing
ethylene naphtha, so as to protect the precious metal catalyst downstream.
★ Product packing
Special metal bucket packing, inner put double plastic bag, net weight 120 kg / barrel.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
Special fibre drum packing, inner put double plastic bag, net weight 25 kg/drum.
★ Precautions for storage and use
※ Pay attention to waterproof、moistureproof, prevent other chemical pollution.
※ Shall not throw and roll the metal bucket when carrying, to avoid high falling when
loading catalyst.
※ Delivery as oxidation state, need to pre-sulfurization before use.
※ Should operate strictly in accordance with the instructions of GTAs-41 dearsenide
agent when start-up and regeneration, also shall carry out under the guide of
professional and technical personal in necessary.
5. Catalyst ex-situ regeneration
5.1 EX-SITU REGENERATION OF HYDROGENATION CATALYST
★ The advantage of ex-situ regeneration method for hydrogenation catalyst
Ex-situ regeneration method of hydrogenation catalyst include: residual oil
combustion-sulfur combustion-coke combustion-sieving step, etc. (can increase fluorine
supplement step if have special demand) Compared with in-situ regeneration method, ex-
situ regeneration method has following advantanges:
※ Good regeneration result, high desulfuration rate and high decarbonization rate---
decarbonization rate is about 5% higher than in-situ regeneration; desulfurization rate
is about 10% higher than in-situ regeneration. High activity recovery rate---under
normal circumstances, activity recovery rate is about 10~15% higher than in-situ
regeneration.
※ Can shorten the unit repairation cycle with ex-situ regeneration, increase the effective
work days.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
※ Through sieving after catalyst regeneration, greatly reduce the catalyst bed pressure
drop.
※ In favor of reduce equipment corrosion and protect environment. Sulfur-containing flue
gas and sewage produced by ex-situ regeneration have special facilities to handle.
※ Have quanlity assured, analysis and evaluate the sample of spent catalyst, so as to
determine the regeneration operation parameter, to ensure the catalyst activity can
restore maxmuim.
※ Easy to control regeneration process, and cannot happen temperature runaway.
※ Good technical economic effect. Because of continuous operation、short time、high
efficiency 、 low energy consumption and high activity recovery rate, etc. Has
comprehensive effect.
★ Index of ex-situ regeneration for hydrogenation catalyst
※ The average decarbonization rate: ≥ 9.5%
※ The average desulfurization rate: ≥ 9.0%
※ Attrition rate of catalyst regeneration: Determined by the analysis data of crush
strengh、dust content、oil content and carbon content of spent catalyst.
★ The suitability of ex-situ regeneration method
※ Suitable for all kinds of regeneration for renewable hydrogenation catalysts(including
hydrotreating、hydrocracking、hydrodewaxing, etc.)
※ Suitable for all kinds of regeneration for renewable chemical catalysts and additives.
Add:1619 Huishan avenue,Wuxi ,Jiangsu,China,214174.
Tel:+86-510-83593312 Fax:+86-510-83574508 [email protected]
Top Related