ill
1
3
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–1
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization
John Kornuc, Ph.D. Naval Facilities Engineering Command (NAVFAC) Engineering and Expeditionary Warfare Center (EXWC)
FRTR, Reston, VA, November 7, 2018
PFAS Site Characterization General Considerations
PFAS Site Characterization - General Considerations
• PFAS are a large group of compounds with widely varying structural and physical/chemical properties
–Which ones to assess? PFAS with regulatory values? Precursors?
–Should we, or can we, analyze all of them?
• Sources usually consist of PFAS mixtures –PFAS mixtures can be complex, and distributed over wide areas
• Multiple sources –Can they be differentiated?
2 FRTR, Reston, VA, November 7, 2018
Sources and Exposure Pathways
• Regulatory values and laboratory detection levels are very low – this could mean assessing a very large area
–Some PFAS transport readily, and are persistent
–Background and multiple sources can complicate
–Cross-contamination concern
• Development of an accurate Conceptual Site Model (CSM) is crucial
–Historical use or presence of PFAS-containing materials, including off-site sources
– Identify transport and exposure pathways, and potential receptors
FRTR, Reston, VA, November 7, 2018
goods • Inhalation • ingestion (dust/fibre)
breast milk
cord blood
Landf Landfill leachate (<10,000 ng/L)1
man
ufac
ture
r w
aste
liquids
Biosolids
(<3,000 ng/g)2
Effluents
(<100 ng/L)3
solids
was
tew
ater
tre
atm
ent
AFFF
PFOS BCF4
AFFF-impacted 6,400 (perch)groundwater = up to mg/L
Adapted from Oliaei 2013, Environ Pollut Res 1Allred et al. 2014 J Chrom;2 Schultz et al. 2006; Higgins ES&T 2005 AFFF-impacted surface water ~ 100’s ng/L4
non-AFFF impacted surface water ~ 2 orders of magnitude lower 3Schultz et al. 2006 a&b ES&T; 4Ahrens et al. Chemosphere 2015
4 FRTR, Reston, VA, November 7, 2018
Understanding PFAS Fate & Transport Perfluoroalkyl Acids - PFAAs
• Mixtures of PFAS require that a range of physical/chemical properties be considered
• PFAS compositions may change over time (e.g. PFAS in Aqueous Film-Forming Foam, or AFFF)
• Compounding the varied phys/chem properties of PFAS mixtures are varying site characteristics including soil types, geochemistry, and hydrology
….but, some generalizations can be made
FRTR, Reston, VA, November 7, 2018
• Perfluoroalkyl Acids PFAAs
–PFSAs (sulfonates), PFCAs (carboxylates)
– includes PFOS and PFOA, and most of the other analytes of EPA Method 537 and derivative methods
PFOS (Source: Environment Canada)
–CF “tail”: imparts hydrophobic character (longer is more hydrophobic, transports slower, linear slower)
–Charged “head group” imparts water solubility; carboxylates transport faster than sulfonates for a given carbon chain length
6 FRTR, Reston, VA, November 7, 2018 5
7
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–2
Environmentally-Relevant Properties: Anionic PFASs
• Anions at environmental & physiological pHs (4-10)
• Low vapor pressure and Henry’s Law so cannot be air-stripped
• Water soluble so readily transported in soil/sediment
Aq Solubility Boiling (mg/L)
Formula MW Vapor Pressure pKa log Kow Koc BCF LC50 Point °C
2.0X10-3 mm Hg at 480, 250- 200-1,500 7.8 mg/L bluegill PFOS C8HF17SO3 500.13 570 at 24 deg C 249 <1.0 4.49 (est)
25 deg C 50,100 carp sunfish 96 hr
2,290-4,340 at 24 3.16X10-2 mm Hg < 5.1-9.4 15.5 mg/L MysidPFOA C8HF15O2 414.07 189 -0.5 to 4.2 4.81 (est) 130
deg C at 25 deg C carp neonate 96 hr
0.71 1,500 mg/L Zebra 510, temp not 2.68X10-2 mm Hg
PFBS C4F9SO3 300.01 210-212 -3.31 (est) 1.82 (est) 180 est rainbow Danio embryo 4-cell, spec'd. at 25 deg C (est) trout 144 hr
FRTR, Reston, VA, November 7, 2018 8
Two PFAS Groups: Per- and Polyfluorinated
• Perfluorinated (ECF synthesis) - all carbons in chain bonded only to F (e.g., PFOS and PFOA); linear and branched
– Few engineered or environmental degradation processes degrade perfluorinated forms
• Polyfluorinated (Telomerization synthesis)
– not all carbons in chain bonded to F, linear
– CH2 – spacer = ‘weakness’ in molecule, degradable/transformable
PFOS (perfluorooctane sulfonate)
Air Water
6:2 FTSA (fluorotelomer sulfonate)
FRTR, Reston, VA, November 7, 2018
Site Characterization: AFFF-derived PFAS 3M AFFF: military-wide use began in 1970
• Aqueous film-forming foam
– Complex, proprietary mixtures of fluorinated & hydrocarbon surfactants, water, corrosion inhibitors, • 89% PFSAs (e.g., PFOS) in 3Msolvent (e.g., butyl carbitol)
– PFASs only comprise a few % by volume AFFF PFSAs (C2-C10)
• Only 1.6% of 3M AFFFs are PFCAs (C4-C12) • AFFFs on the Qualified Product List (QPL) Other Anionic (-)
– 1970-1976 Light Water (3M) and Ansulite (Ansul) PFCAs (e.g., PFOA) Zwittterionic (+/-)
– 1976 Aer-O-Water (National Foam) Other cationic (+) • All contribute to total fluorine – 1994 Tridol (Angus)
– After 2002 Chemguard (Chemguard), Fireaide (Fire Service Plus)
– AFFFs currently on QPL (currently 11 products) http://qpldocs.dla.mil/search/parts.aspx?qpl=1910
• Multiple AFFFs used at most sites
– Firefighter training areas and equipment test areas typically used repeatedly over years
9 FRTR, Reston, VA, November 7, 2018 10 FRTR, Reston, VA, November 7, 2018
AFFF in use today PFSAs & PFCAs in 3M AFFF
• PFOS production ceased in US in 2002; AFFF stockpiles removed from use over the past several years
• Continued use of fluorotelomer-based AFFF
–Does not contain PFOS and precursors do not degrade to PFOS
–Precursors degrade to PFCAs (including PFOA) and FTSAs
–Reformulations generally contain smaller carbon chain lengths (<C6)
• Residuals in equipment possible (PFOS)
• Fluorine-free foams being developed/tested
• When produced by 3M’s electrofluorination (ECF) process5
–‘crude’ synthesis, many side products – odd & even1,2 chain lengths (C2-C14)3,4
linear – C2 & C3 sulfonates recently branched isomer
isomersfound in AFFF and groundwater – branched & linear isomers (30:70)1,5,6
• if branched isomers are excluded by the lab, concentrations are underestimated (biased low) by ~25%
11 FRTR, Reston, VA, November 7, 2018 12 FRTR, Reston, VA, November 7, 2018
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–3
Transport – PFAS Chemical Properties
13
Fluorotelomer-Based AFFFs
n = 6, 8 Ansul (1970), Angus (1994), Chemguard (2002)
S
O
O
NH
N+
O
O-
C
F
F
F n
n = 4, 6, 8, 10, 12 note: long chain lengths National Foam (1976), Fire Service Plus (2002)
n = 5,7, 9 Buckeye (2002)
n = 6, 8 Angus (1994)
S
O
O H N NH+
C
F
F
F n
n = 6, 8 National Foam (1976), Fire Service Plus (2002)
n = 5, 7, 9
Buckeye (2002) Transport • Anions > zwitterions > cations • Anions: shorter chain lengths generally migrate faster (less retardation) • Weak acids/bases: transport will depend on pH and molecule’s charged state (ionic or neutral)
• add to total mass of F • none on UMCR3 & Method 537
lists • potential to degrade to 6:2 & 8:2
fluorotelomer sulfonates & PFCAs
• 6:2 & 8:2 fluorotelomer sulfonates not major components in AFFF
FRTR, Reston, VA, November 7, 2018
• Transport determined in part by chemical structure • Anions > zwitterions > cations
• Shorter chain lengths generally migrate faster (less retardation, lower Koc)
• Carboxylates migrate faster than sulfonates (same carbon chain length)
• likely to impact surface waters – more common to impact fresh than saltwater
• challenging to remove by GAC
• For many precursors, transport will depend on pH and molecule’scharged state
• Cationic & zwitterionic PFASs may be cation exchanged onto source-zone sediments
14 FRTR, Reston, VA, November 7, 2018
Media - Solution Chemistry & Transport Some PFAS Plumes are Large
• Decreasing pH (more acidic), increases retardation • Sweden: Military airport origin of km-long plume • Organic carbon increases retardation –Spatial distribution related to drinking water delivery, occurring in • Ca++ increases retardation (saltwater wedge or before 1990s
•
retardation)
Iron oxides increase retardation –PFBS in blood even though short chain
• Increasing ionic strength increases retardation – may • Oakey Aviation Base (military) in SW Queensland, Australia be relevant for sites near estuaries/ocean extends over 4 km
• Remedial approaches that change pH or introduce polyvalent cations (i.e., ISCO) potentially impact anionic PFAS transport
• Leaky landfill, military, and civilian airports sources of human exposure to PFASs through drinking water
• Sorption generally increases in the presence NAPLs
15 FRTR, Reston, VA, November 7, 2018 16 FRTR, Reston, VA, November 7, 2018
Other Widespread Sources: Landfills
Landfill Leachate
–2nd most concentrated (tens of μg/L)1-3 point source of many PFAS classes after AFFF-impacted groundwater
–most abundant short-chain PFCAs & fluorotelomer acids (unique signature to landfill leachate)3
Other Widespread Sources: WastewaterTreatment
• Municipal and industrial wastewater treatment plant (WWTP) effluent
–3rd highest source (< 0.1 μg/L levels) after landfill leachates and AFFF-impacted sites
– No significant removal of PFOA & 6:2 fluorotelomer sulfonate
– Net increase in PFOS mass flow during WWTP
• Land application of WWTP biosolids leaches to soil and groundwater where biosolids applied
17 FRTR, Reston, VA, November 7, 2018 18 FRTR, Reston, VA, November 7, 2018
19
21
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–4
What/Where to Sample (Navy Sites) Other Sources: Electroplating andPlastics/Polymer Manufacturing
• Chromium electroplating – PFASs used for mist suppression
–PFCAs and PFSAs (μg/L) in discharge water
–6:2 FTSA ‘alternative’ mist suppression agent
• Industrial (plastics/polymer) manufacturing sources
–PFNA: West Deptford, NJ Solvay Specialty Polymers
–PFOA: Saint Gobain Performance Plastics and Honeywell polymer manufacturing in Hoosick Falls, NY
• Limited public data: municipal airports, AFFF production/formulation sites, oil refineries
FRTR, Reston, VA, November 7, 2018
Investigation Considerations
CSM Substantiates Investigation; Generally 2 Categories in DoN:
Historical Release and/or Use of AFFF; examples: − Fire Training Areas (FTAs) using AFFF − Equipment Test Areas − Crash or Fire Sites where AFFF was used − Fuel Spills Treated with AFFF − Hangars, Runways & Flight line areas − Storage areas, piping systems, and equipment cleanout areas − Runoff collection areas
Historical activities that may have released PFAS, examples: − Mist suppression in plating facilities − Oil-water separators − Other piping systems − Wastewater Treatment Plant effluent and biosolids
20 FRTR, Reston, VA, November 7, 2018
Sampling for PFAS
• Many common materials and sampling equipment contain PFAS
• Dealing with ultra-low detection levels AVOID:
• Tyvek
• Teflon • Water-proof clothing
• New clothing • Blue Ice
• Handling food packaging
• Non-stick or water/grease/stain-resistant
• Glass containers
OK:
• Plastic containers (HDPE or polypropylene, no lined caps)
• Nitrile gloves (change often)
• HDPE tubing and bailers
• Alconox or Liquinox soaps
• PFC-free laboratory certified water
FRTR, Reston, VA, November 7, 2018
Sampling for PFAS - Stratification
• PFAS accumulate on water surface (varies with site)
• Do not collect water at the very surface
• Bailers work well
Source: Transport Canada, SLR Consulting Ltd.
22 FRTR, Reston, VA, November 7, 2018
PFAS Analytica Methods - EPA Method 537 Non-Drinking Water PFAS Methods
• Determines 14* PFASs, for the drinking water matrix only
• Uses liquid chromatography/tandem mass spectrometry (LC/MS/MS):
– 9 perfluoroalkyl carboxylates: C6-C14 (where C8 = PFOA)
– 3 perfluoroalkyl sulfonates (C4, C6, C8 where c8 = PFOS)
– 2 sulfonamidoacetic acids (N-MeFOSAA, N-EtFOSAA)
• Each lab develops its own method for various matrices otherthan drinking water
• No EPA guidance on hold times, thermal preservation requirements
• EPA published methods are being developed
• In the meantime, DoD ELAP addressing these issues through modification to DoD QSM requirements
• DoD uses laboratories that have ELAP-accredited methods (matrix-specific) for non-drinking water PFAS determination;methods are compliant with QSM 5.1, Table B-15 (LC-MS/MS)
*Many labs now offer a 24 compound list, including 3 fluorotelomer sulfonates
FRTR, Reston, VA, November 7, 2018 24 FRTR, Reston, VA, November 7, 2018 23
25
27
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–5
What About “the Other” PFASs? Other PFASs Beyond Method 537 Analytes
• Over 300 PFAS have been identified in AFFF formulations & groundwater
• 6:2 Fluorotelomer Sulfonate found at high levels in DoD GW at FTA
• Some compounds at levels greater than PFOS/PFOA (which can be in ppm range)
• QTOF is used to identify and quantify other PFAS but lack of standards for many PFAS means results are semi-quantitative
• Few labs are currently equipped to determine large list
FRTR, Reston, VA, November 7, 2018
Useful when:
• Additional toxicity data or regulatory values become available
• States require other PFASs (if promulgated)
• For delineation (shorter compounds C4 & C2 move faster)
• Treatment feasibility (e.g. GAC may not adsorb short chain compounds)
• Biotic and abiotic transformation / mass balance
• Tracing sources in mixed plumes
• Source zones may contain cations & zwitterions not normally analyzed; these may be mobilized by being transformed by ISCO, for example
• Fluorotelomer AFFF formulations are being delineated
26 FRTR, Reston, VA, November 7, 2018
Precursors and Total Fluorine: Alternative Methods
• Total oxidizable precursor (TOP) assay1
–Polyfluorinated chemicals react with hydroxyl radicals but perfluorinated do not (e.g., PFOS and PFOA)
–Net increase in PFCAs after oxidation of sample = precursors
• Total fluorine by PIGE2
– PFAS sorbed onto media to create ‘target’
– 10 nA of 3.4 MeV protons for 180 s
– Quantitative, high-throughput, inexpensive
• AOF – Adsorbable Organic Fluorine
– Total F by IC after combustion of organofluorine; limited availability
FRTR, Reston, VA, November 7, 2018
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
28
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
Fire Training Area (FT-02) General Site Characteristics
Former Training Area − In use 1968-91 Current Fire Training Area
Pond/Pump Station
Waste Water Treatment Plant
Unlined Polishing Pond
OW Separator
St. John’s River
Tree Line
GW Flow Direction: Primarily N/NE
FRTR, Reston, VA, November 7, 2018
29
Groundwater sampling co-located, but 4 samples per location
Two-Tiered Sampling Approach
FRTR, Reston, VA, November 7, 2018
30
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
FRTR, Reston, VA, November 7, 2018
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–6
31
Transect A: sum soil PFAS (ng/kg)
FRTR, Reston, VA, November 7, 2018 32
Transect A: sum water PFAS (ng/L)
FRTR, Reston, VA, November 7, 2018
33
Transect B: sum soil PFAS (ng/kg)
FRTR, Reston, VA, November 7, 2018 34
PFAS Composition Distribution Transect A: Groundwater
FRTR, Reston, VA, November 7, 2018
35
Sum of Zwitterionic and Cationic PFAS: Transect A
FRTR, Reston, VA, November 7, 2018 36
A high percentage of the soil PFAS mass at the source zone (Locations 2 & 3) is from zwitterionic and cationic compounds.
FRTR, Reston, VA, November 7, 2018
Source Zone Soils are Dominated by Cationic and Zwitterionic PFAS
39
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–7
37
% Branching PFOS; Transect A (groundwater)
FRTR, Reston, VA, November 7, 2018 38
% Branching PFOA; Transect A (groundwater)
FRTR, Reston, VA, November 7, 2018
41
Questions
42
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
Case Study – NAS Jacksonville Firefighter Training Area Results Summary
● Significant penetration with depth at source zone (location 3), and often elevated concentrations at depth in downgradient locations
● Compositional changes with depth and distance from the source Increasing PFCA concentrations with depth (especially in groundwater)
Cations/zwitterions mainly in source zone for soil, some transport observed for groundwater but more limited than anion transport
Some presumed transformation products have peak concentrations at intermediate locations from source
● Linear vs branched PFOS patterns different from PFOA patterns PFOA may be formed from transformation of fluorotelomer precursors
Differential transport of PFOS isomers evident
FRTR, Reston, VA, November 7, 2018
PFAS Site Characterization Summary
● Process is basically the same as other contaminants such as BTEX
● Develop a CSM which includes the PFASs of concern
● Incorporate Fate & Transport information for the population of PFAS of concern
● Determination of all PFAS species at a site may not be possible using currently available analytical methodology from all but a few (academic) laboratories
● Use proper containers (HDPE, PP) for sample collection and avoid PFAS-containing materials during sampling
● “Chromatographic effect” on PFAS distribution in site soil/groundwater evident vertically and horizontally
● Mass storage in low permeability zones and persistence and transformation of PFAS supplies groundwater plumes for extended periods
40 FRTR, Reston, VA, November 7, 2018
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–8
43
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
44
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
45
Case Study – NAS Jacksonville Firefighter Training Area and WWTP
46
Relative PFAS Concentrations at NAS JAX, FFTA
FRTR, Reston, VA, November 7, 2018
PFAS Projects at EXWC PFAS Projects at EXWC (cont’d)
• NESDI 527 “Structure-Function Relationship and Environmental Behavior of Per- and Polyfluorochemicals from Aqueous Film-forming Foams“
• Determination of PFAS in various media across Navy using expanded library of compounds and structure-activity relationships.
• NESDI 534 “Technology Evaluation and Sampling for Treatment of Perfluorochemicals”
• Assess effects of prior treatment of co-contaminants (e.g. treatment of TPH at firefighter training areas) on PFAS nature and extent.
• NESDI 555 “Demonstrating the Effectiveness of Novel Treatment Technologies for the Removal of Poly and Perfluoroalkyl Substances (PFASs) from Groundwater”
• Determine effectiveness of new sorbents, including amendments, as well as degradative methods on PFASs in water and soil.
• ESTCP ER-201633 “Characterization of the Nature and Extent of Per- and Polyfluoroalkyl Substance (PFASs) in Environmental Media at DoD Sites for Informed Decision-Making”
• High resolution sampling and analysis for detailed site characterization of PFAS source areas and plume to understand transport and transformation of the 300+ PFAS compounds known to be associated with AFFF.
• ESTCP ER-201729 “Field Demonstration to Enhance PFAS Degradation and Mass Removal Using Thermally-Enhanced Persulfate Oxidation Followed by Pump-and-Treat”
• Demonstrate the treatment of PFASs in situ using persulfate and peroxide under acidic conditions followed by pump-and-treat.
48 47
49
Per- and Polyfluoroalkyl Substances (PFASs) Site Characterization Kornuc–9
PFAS Projects at EXWC (cont’d)
• ESTCP (Wood lead) “Removal and Destruction of PFAS and Co-contamination from Groundwater”
• Treatment train approach using a four-step process to remove, concentrate, and destroy PFASs: (1) ion exchange (IX) media (2) IX media regeneration and reuse; (3) regenerant solution distillation and reuse; and (4) onsite destruction of concentrated PFASs in concentrates by plasma.
Top Related