8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
1/106
www.huawei.com
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
pti! "T# $00 %&00"002
Con'iguration (uide
)) *2000 +e LCT
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
2/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Preface
This course is developed ased on
services o' the pti! "T# $00
%&00"002.
This course is designed to help
microwave engineers to independently
con'igure common services o' the pti!
"T# $00 %&00"002.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
3/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-tudy (uide
This course descries the con'igurations
o' the pti! "T# $00 %&00"002.
e'ore learning this course, it is
recommended that you read the OptiX
RTN 900 V100R002 System Description,
OptiX RTN 900 V100R002 Networking
and Protection, and OptiX RTN 900
V100R002 Hyrid !eat"re.
This course 'ocuses on the
con'igurations o' various services.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
4/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
"e'erences
OptiX RTN 910 #on$ig"ration %"ide
OptiX RTN 9&0 #on$ig"ration %"ide
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
5/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
/urpose o' This Course
A'ter learning this course, you will e ale to
Con'igure the radio lin1s o' the pti! "T# $00 %&00"002.
Con'igure T3 services o' the pti! "T# $00 %&00"002.
Con'igure 4thernet services o' the pti! "T# $00 %&00"002.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
6/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents
1. Service Types of the OptiX RTN
900 V100R002
2. Con'iguring "adio Lin1s
5. Con'iguring T3 -ervices
. Con'iguring 4thernet -ervices
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
7/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-ervice Types
Types o' "adio Lin1s T3 radio lin1 7including -H radio lin1 and /H radio lin18
Hyrid radio lin1
-ervice types carried y the radio lin1
T3 services carried y the T3 radio Hyrid services o' #ative 4& services and #ative 4thernet services carried y the
Hyrid radio 7supporting the A3 'unction8
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
8/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Types o' 4thernet -ervices
4)Line services
*#9)*#9 4)Line services
/oint)to)point transparently transmitted 4)Line service
%LA#)ased 4)Line service
*#9)##9 4)Line services carried y :in: lin1s
4)LA# services
9444 ;02.&d ridge
9444 ;02.&< ridge
9444 ;02.&ad ridge
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
9/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents1. Service Types of the OptiX RTN 900
V100R002 RTN
2. Configuring Raio !in"s Configuration Proceure
Configuration Tas"s
5. Con'iguring T3 -ervices
. Con'iguring 4thernet -ervices
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
10/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
/rocedure 'or Con'iguring a "adio Lin1
Confguring theRadio link mode
Confguring theIF/ODU ino. o a
radio Link
-1ip this step 'or &=0>#=0
Creating an !/9C
group
!/9C lin1
-etting the
Hyrid>A3
attriutes o' the
!/9C Hyrid radio
lin1
Creating an #=&
protection group
Creating a &=&
protection group
#=& lin1 &=& lin1
Confguring anNE
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
11/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #4
①
②
③
④
3ethod &Create an #4 y
using the search
method.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
12/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #4
3ethod 2Create an #4 y
using the
manual method.
①②
③
④
⑤
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
13/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
3odi'ying the #4 9>#ame
①
②
③
④
⑤
⑥
⑦
Modiy the NE
ID. he ID oan NE in thenet!ork mu"t#e uni$ue.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
14/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an !/9C /rotection (roup①
②
③
④
⑤
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
15/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4Creating an !/9C /rotection
(roup #$ Channe% &an'ith( -et this parameter according to
the networ1 planning documents. 9t can e set to 2)* or
+,*. 9' this parameter is set to +,*, the high)power
* must e used. Po%ari-ation irectionV/( This parameter indicates
the polari@ation direction o' a radio lin1. 9t is
recommended that you install the two 9?!2 oards that
'orm an !/9C wor1group in the slots that are at the
same layer or in the same column. -et the 9? port on the
9?!2 oard that has a smaller slot numer to
Po%ari-ation irectionV and that on the other 9?!2
oard to Po%ari-ation irection.
!in" #V/( -et these two parameters according to thenetwor1 planning in'ormation. These two parameters
must e set to di''erent values, ut !in" #V and !in"
# must e respectively set to the same values at oth
ends o' a lin1. *ai3u3 Trans3it Po'er( This parameter indicates
the ma. transmit power o' the *. The value o' this
parameter must not eceed the rated power range
supported y the *. This parameter speci'ies the
upper threshold o' the transmit power range o' an *.
A'ter an AT/C adBustment, the transmit power cannoteceed the value o' this parameter.
Trans3it Po'er/Trans3ission $re4uency( -et these
two parameters according to the networ1 planning
documents.
9' an * supports only one T>" spacing, set this parameter to the de'ault value 0. The de'ault transmission status o' an
* is 5n3ute. -et AT/C parameters according to the networ1 planning documents. #ote that e'ore the antenna alignment, 6TPC
7na8%e must e set to isa8%e.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
16/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4-etting the Hyrid>A3
Attriutes o' the !/9C Hyrid "adio Lin1
%et AM Enable Status a&&ording to the net!ork 'lanning do&ument". Note that #eore the antennaalignment( make "ure that AM Enable Status i" "et to Disabled.
)hen 6* 7na8%e Status is set to 7na8%e, set *ou%ation *oe of the uarantee 6* Capacity and *ou%ation*oe of the $u%% 6* Capacity according to the networ1 planning documents.
E1 Capacity "'e&ife" the num#er o E* "er+i&e" that &an #e tran"mitted in ,y#rid mi&ro!a+e rame". %etthi" 'arameter a&&ording to the de"ign. Note that the num#er o E* "er+i&e" at #oth end" o a radio linkho' mu"t #e the "ame- other!i"e( the "er+i&e" are una+aila#le.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
17/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #=&
/rotection (roup
See ne't page
①
②
③
④
⑤
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
18/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #=&
/rotection (roup
Confgure a !orking #oard%ele&t Worin! "nit rom Select Mappin! Direction. %ele&t an IF 'ort o the !orking#oard rom Select Mappin! Mode( and &li&k to add the IF 'ort in Mapped#oard.
Confgure a 'rote&tion #oard%ele&t $rotection "nit rom Se%ect *apping irection. -elect an 9? port o' the protection
oard 'rom Se%ect *apping *oe, and clic1 to add the 9? port in *appe &oar.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
19/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating a &=& /rotection
(roup
①
②
③
④
⑤
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
20/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating a &=&
/rotection (roup %ele&t the ** SD%&D%'S#
'rote&tion rom the Worin!
Mode dro'0do!n li"t.
U"ethedeault+alue.
%ele&t a !orking IF #oard and a'rote&tion IF #oard. In the &a"e o** FD/%D 'rote&tion grou'( the!orking #oard and 'rote&tion
#oard" mu"t #e &onfgured in t!o'aired "lot".
Con'iguring the
"? lin1 mode
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
C 'i i th
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
21/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? radio lin1
Con'iguring the
9?>* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Confguring theIF/ODU Inormation o a Radio
Link①
②
③
④
C 'i i th
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
22/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
9?>* 9n'ormation o' a "adio Lin1
-et the parameters according to the
networ1 planning documents. The A3 'unction is disaled y de'ault.
These two parameters are
availale only when 7na8%e
A3 is set to 7na8%e.
This parameter is availale
only when 7na8%e A3 is set
to isa8%e.
-et this parameter y
strictly con'orming to
the design. The numer
o' 4& services on oth
ends o' a hop o' a radio
lin1 hop.
-et the transmit 're
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
23/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents1. Service Types of the OptiX RTN
900 V100R002
2. Configuring Raio !in"s
:. Configuring T* Services
;. Configuring 7thernet Services
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
24/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ime"lot" or DM %er+i&e" on IF1oard" +hen T3 services need to e transmitted on a radio lin1, you need to con'igure cross)connections etween theservice timeslots on the corresponding service oards and the service timeslots on the corresponding 9? oards. The
timeslots 'or the T3 services on 9? oards are closely related to the type o' the radio services transmitted y the 9?
oard and the radio capacity.
T* Raio
+hen the 9? oard wor1s in /H radio mode, i' the microwave capacity is n4&, the 'irst to nth %C)&2 timeslots
on the 9? oard are availale and correspond to the 'irst to nth 4&s that are transmitted over radio. 9' a cross)
connection is con'igured etween an 4& port on a service oard and the second %C)&2 timeslot in %C)& on the
9? oard, the 4& services that are accessed through the 4& port are sent to the second 4& timeslot that is
transmitted over radio. 9' the radio capacity is 45, only the 'irst %C)5 timeslot in %C)& on the 9? oard is
availale and corresponds to the 45 channel that is transmitted over radio.
+hen the 9? oard wor1s in -T3)& mode, all the timeslots in %C)& on the 9? oard are availale and
correspond to the timeslots in the %C) that is transmitted on radio.
y8ri Raio
+hen the 9? oard wor1s in -T3)& mode, all the timeslots in %C)& on the 9? oard are availale and
correspond to the timeslots in the %C) that is transmitted on radio. 9' an 9? oard wor1s in Hyrid radio mode
and the 71 Capacity is set to n in y8ri/6* Configuration, the 'irst to nth %C)&2 timeslots on the 9? oardare availale and correspond to the 'irst to nth 4& timeslots that are transmitted over radio. ?or eample, i' the
4& capacity is D4&, only the 'irst to sity)third %C)&2 timeslots in %C)& and the 'irst to twel'th %C)&2 timeslots
in %C)2 on the 9? oard are availale. 9' a cross)connection is con'igured etween an 4& port on a service
oard and the second %C)&2 timeslot in %C)& on the 9? oard, the 4& services that are accessed through the
4& port are sent to the second 4& timeslot that is transmitted over radio.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
25/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring Linear 3-/ 7ptional8
①
②
③
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
26/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring Linear 3-/ 7ptional8
Protection Type( can e set to 1
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
27/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the Cross)Connections o'
T3 -ervices 9n the case o' &=& protection con'iguration or &=& linear 3-/, you need to con'igure T3 services on the wor1ing channel only. 9n
the case o' #=& protection con'iguration or &# linear 3-/, you also need to con'igure the etra services on the protection
channel i' re
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
28/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the Cross)Connections o'
T3 -ervices This parameter indicates the level o' aservice. 9' the service is an 4& service or a data
service that is ound with %C)&2 paths, set thisparameter to VC12. 9' the service is a data
service that is ound with %C)5 channels, set
this parameter to VC:. 9' all the services in a
%C) pass through the #4, set this parameter to
VC;.
-et the source slot, source port, source %C,
and source timeslot o' the service source. +hen
Source is set to the slot o' the triutary oard,
Source Port and Source VC; are unavailale.
-et these parameters according to the networ1
planning in'ormation.
-et the sin1 slot, sin1 port, sin1 %C, and
sin1 timeslot o' the service sin1. +hen Sin" isset to the slot o' the triutary oard, Sin" Port
and Sin" VC; are unavailale. -et these
parameters according to the networ1 planning
in'ormation.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
29/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating Cross)Connections 'or
-#C/ -ervices +hen con'iguring the -#C/ services, you need to con'igure the cross)connections
o' the -#C/ services.①
②
③
④
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
30/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating Cross)Connections 'or
-#C/ -ervices The cross)connection o' -#C/ services is a cross)connection that a wor1ing source and a protection source correspond to a service sin1. This parameter indicates the level o' a service. 9' the service is
an 4& service or a data service that is ound with %C)&2 paths,set this parameter to %C&2. 9' the service is a data service that is
ound with %C)5 channels, set this parameter to %C5. 9' all the
services in a %C) pass through the #4, set this parameter to
%C.
irection is generally set to &iirectiona%.
anoff Ti3e speci'ies the duration o' the hold)o'' time.
+hen a line 'ault occurs, an #4 can per'orm -#C/ switchinga'ter a delay o' time to prevent the situation where the #4
per'orms -#C/ switching and other protection switching at the
same time. -et the hold)o'' time 'or the -#C/ when the -#C/
wor1s with the lin1)level protection schemes, including the &=&
protection and #=& protection. The hold)o'' time must e more
than the switching time o' the protection scheme that wor1s with
the -#C/. 9t is recommended that you set the hold)o'' time to 0
when only the -#C/ is con'igured.
-et the source slot, source port, source %C, and source
timeslot o' the wor1ing source and protection source. The wor1ing
service source and protection service source can e the 9? oard
or the line oard. However, the 9? &=E protection oard cannot e
used as the source o' -#C/ services.
-et the sin1 slot, sin1 port, sin1 %C, and sin1 timeslot o' the
-#C/ service sin1. 9' Sin" is set to the slot o' the triutary oard,
Sin" Port and Sin" VC; are unavailale.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
31/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents1. Service Types of the OptiX RTN
900 V100R002
2. Configuring Raio !in"s
:. Configuring T* Services
;. Configuring 7thernet Services
C 'i ti ' % i - i
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
32/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'igurations o' %arious -ervicesP2P/V!6N 7!ine >in>&ase 7
!ine#777 )02.1 8rige
8ase 7!6N#777 )02.14 8rige
8ase 7!6N#777 )02.1a 8rige
8ase 7!6N
& -etting theparameters o'4thernet ports
-etting theparameters o'4thernet ports
-etting theparameters o'4thernet ports
-etting theparameters o'4thernet ports
-etting theparameters o'4thernet ports
2 -etting theparameters o'the 9?F4THports
-etting theparameters o'the 9?F4THports
-etting theparameters o'the 9?F4THports
-etting theparameters o' the9?F4TH ports
-etting theparameters o' the9?F4TH ports
5 Con'iguringthe LA(
2 Con'iguringthe LA(
2 Con'iguring theLA(
2 Con'iguring theLA(
2 Con'iguring theLA(
2
Con'iguring
the 4)Line
Con'iguring
the :in: Lin1
Con'iguring the
4"/-
2 Con'iguring the4"/-
2 Con'iguring the4"/-
2
D Con'iguringthe :o-
2 Con'iguringthe 4)Line
Con'iguring the4)LA#
Con'iguring the 4)LA#
Con'iguring the 4)LA#
6 %eri'ying4thernetservicecon'igurations
Con'iguringthe :o-
2 Con'iguring the:o-
2 Con'iguring the:o-
2 Con'iguring the:o-
2
%eri'ying4thernetservicecon'igurations
%eri'ying4thernet servicecon'igurations
%eri'ying 4thernetservicecon'igurations
%eri'ying 4thernetservicecon'igurations
Note(
2 indicates that the con'iguration item is optional. Con'igure the services according to the servicere
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
33/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports
Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
34/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet
/ortsCon'iguring the
tra''ic control
-etting theadvanced
attriutes
-ettinggeneral
attriutes
/2/ 4)Line services
%LA#)ased 4)Line
services
:in:)ased 4)Lineservices
-etting the layer
2 attriutesCon'iguring the
tra''ic control
-etting the
advanced
attriutes
-etting
general
attriutes
Con'iguring the
tra''ic control
-etting the
advanced
attriutes
-etting
general
attriutes
9444 ;02.&d ridge)
ased 4)LA# services
9444 ;02.&< ridge)ased4)LA# services
9444 ;02.&ad ridge)ased
4)LA# services
-etting the layer2 attriutes
Con'iguring thetra''ic control
-etting the
advanced
attriutes
-ettinggeneral
attriutes
-etting the layer 2Con'iguring the-etting the
-etting general
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
35/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the layer 2
attriutesCon'iguring the
tra''ic controladvanced
attriutes
-etting general
attriutes
-etting the /arameters o' 4thernet /orts
①
②
③
④
⑤
/orts on an
4thernet oard
9?F4TH
ports
-etting the layerCon'iguring the-etting the
-etting general
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
36/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the layer
2 attriutesCon'iguring the
tra''ic controladvanced
attriutes
-etting general
attriutes
-etting the /arameters o' 4thernet /orts The general attriutes o' an 4thernet port de'ine the physical)layer in'ormation, such as the port mode,
encapsulation type, and maimum 'rame length.
9n the case o' used ports, set 7na8%e Port to 7na8%e. 9n the case o' unused ports, set 7na8%e Port to isa8%e. 4ncapsulation Type 9n the case o' /2/ 4)Line services and 9444 ;02.&d ridge)ased 4)LA# services, set 7ncapsu%ation Type to Nu%%. 9n the case o' %LA#)ased 4)Line services and 9444 ;02.&d ridge)ased 4)LA# services, set 7ncapsu%ation Type to
)02.14. 9n the case o' :in:)ased 4)Line services and 9444 ;02.&ad ridge)ased 4)LA# services, i' a *#9 can access untagged
'rames, set 7ncapsu%ation Type to N5!!. 9' a *#9 can access tagged 'rames only, set 7ncapsu%ation Type to )02.14. 9n the
case o' an ##9 port, set 7ncapsu%ation Type to >in>.
9n the case o' an 4thernet port that is connected to the eternal e
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
37/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet /orts
A'ter the tra''ic control is enaled, i' the lin1 is congested, the 4thernet port sends the /A*-4 'rame to
noti'y the peer end o' stopping the transmission o' 4thernet pac1ets 'or a period, thus eliminating thelin1 congestion.
"e
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
38/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet /orts
?or /2/ 4)Line services and 9444 ;02.&d ridge)ased 4)LA# services ou do not need to set the layer 2 attriutes.
?or %LA#)ased 4)Line services and 9444 ;02.& ridge)ased 4)LA# services 9' all the accessed services carry %LA#
tags 7tagged 'rames8, set Tag to Tag 6'are. 9' none o' the accessed services carries %LA# tags 7untagged 'rames8, set
Tag to 6ccess. 9' the access services contain oth tagged 'rames and untagged 'rames, set Tag to y8ri. -et efau%t
V!6N # and V!6N Priority according to the networ1 planning in'ormation.
?or :in:)ased 4)Line services and 9444 ;02.&ad ridge)ased 4)LA# services 9n the case o' a *#9 port, i'7ncapsu%ation Type is set to )02.14, Tag must e set to Tag 6'are 7de'ault value8. 9n the case o' an ##9 port that is
connected to the eternal ein> Type o3ain according to the T)/9 o' the -%LA# that is supported y the
eternal e
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
39/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet /orts
The advanced attriutes o' 4thernet ports are used to con'igure the 3AC>/H loopac1 and
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
40/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports
Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
-etting the layer-etting the
d d-etting general
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
41/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 9?F4TH /orts
-etting the layer
2 attriutesadvanced
attriutes
-etting general
attriutes
①
②
③④
⑤
4ncapsulation Type
9n the case o' /2/ 4)Line services and 9444 ;02.&d ridge)ased 4)LA# services, set
7ncapsu%ation Type to Nu%%.
9n the case o' %LA#)ased 4)Line services and 9444 ;02.&d ridge)ased 4)LA# services,
set 7ncapsu%ation Type to )02.14
9n the case o' :in:)ased 4)Line services and 9444 ;02.&ad ridge)ased 4)LA#
services, i' a *#9 can access untagged 'rames, set 7ncapsu%ation Type to N5!!. 9' a *#9
can access tagged 'rames only, set 7ncapsu%ation Type to )02.14. 9n the case o' an ##9
port, set 7ncapsu%ation Type to >in>
-etting the layer-etting the
advanced-etting general
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
42/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
The Layer 2 attriutes o' the 9?)4TH port speci'y the relevant in'ormation aout the lin1 layer, including the
tag attriute and :in: type domain.
-etting the /arameters o' 9?F4TH /orts
-etting the layer
2 attriutesadvanced
attriutes
-etting general
attriutes
?or /2/ 4)Line services and 9444 ;02.&d ridge)ased 4)LA# services ou do not need to set the
layer 2 attriutes.
?or %LA#)ased 4)Line services and 9444 ;02.& ridge)ased 4)LA# services 9' all the accessed
services carry %LA# tags 7tagged 'rames8, set Tag to Tag 6'are. 9' none o' the accessed servicescarries %LA# tags 7untagged 'rames8, set Tag to 6ccess. 9' the access services contain oth tagged
'rames and untagged 'rames, set Tag to y8ri. -et efau%t V!6N # and V!6N Priority according to
the networ1 planning in'ormation.
?or :in:)ased 4)Line services and 9444 ;02.&ad ridge)ased 4)LA# services 9n the case o' a *#9
port, i' 7ncapsu%ation Type is set to )02.14, Tag must e set to Tag 6'are 7de'ault value8. 9n the case o'
an ##9 port that is connected to the eternal ein> Type o3ain according to the T)/9
o' the -%LA# that is supported y the eternal e
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
43/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
+hen the 9?F4TH port transmits an 4thernet service that permits it errors, such as a voice service
or a video service, you can set 7rror $ra3e iscar to isa8%e.
-etting the /arameters o' 9?F4TH /orts
g y
2 attriutesadvanced
attriutes
-etting general
attriutes
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
44/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports
Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
45/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con(!urin! t)e !6 Lin1 aggregation allows multiple lin1s that are attached to the same e
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
46/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con(!urin! t)e !6 Manually enter the num#er o the L34. hi"'arameter i" +alid only !hen Auto*aticallyAssi!n i" not "ele&ted.
%et the name o the L34. It i" re&ommended thatyou "et +A, -a*e in a orm o LAG_No. %et +A, .ype to the "ame +alue a" the o''o"itee$ui'ment. 4enerally( "et +A, .ype to Static or thee$ui'ment at #oth end". In the &a"e o FE/4E 'ort"( "et +oad S)arin! to the"ame +alue a" the o''o"ite e$ui'ment. I the L34 i"&onfgured only to reali5e 'rote&tion( it i" &ommended thatyou "et +oad S)arin! to -on/S)arin! or the e$ui'mentat #oth end". I the L34 i" &onfgured to in&rea"e the
#and!idth( it i" re&ommended that you "et +oad S)arin! to S)arin! or the e$ui'ment at #oth end". )hen the,y#rid mi&ro!a+e u"e" the N6/78IC &onfguration mode("et +oad S)arin! to S)arin! or the e$ui'ment at #othend". %et 0eertie Mode to the "ame +alue a" the o''o"itee$ui'ment. 4enerally( "et 0eertie Mode to 0eertie or the e$ui'ment at #oth end". hi" 'arameter i" +alid toonly L34" !ho"e %et +oad S)arin! to -on/S)arin!. %et Syste*$riority to the deault +alue. hi" 'arameter i" +alid toonly "tati& L34". %et Main #oard( Main $ort( and Selected Slae$orts a&&ording to the 'lanning inormation. It i"re&ommended that you "et thi" 'arameter to the "ame+alue or the main and "la+e 'ort" o the L34" at #othend". he ,y#rid/3M attri#ute" o the IF 'ort" in the L34"mu"t #e the "ame.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
47/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con(!urin! t)e !6
Port Priority indicates the priorities o' the ports in a LA( as de'ined in the LAC/protocol. The smaller the value, the higher the priority. +hen ports are added into a
LA(, the port o' the highest priority is pre'erred 'or service transmission.
-et Syste3 !oa Sharing ash 6%gorith3 to the same value as that o' the oppositee
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
48/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
Configuring the >in> !in"
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
49/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >in> !in" Confguring the 9in9 link i" 'rere$ui"ite or &onfguring 9in9 'ri+ate line "er+i&e" and
:6;.*ad #ridge "er+i&e".
①
②
③
④
⑤
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
50/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >in> !in"
>in> !in" # speci'ies the 9 o' a :in: lin1. %alue range & to 2$$62$D.
&oar speci'ies the oard that carries the :in: lin1. The 7ncapsu%ation Type
o' the port must e set to >in> during the con'iguration o' port parameters.
Port speci'ies the port that carries the :in: lin1. The 7ncapsu%ation Type o'
the port must e set to >in> during the con'iguration o' port parameters. SV%an # speci'ies the %LA# 9 7at the networ1 operator side8 'or the :in:
lin1. This parameter is set according to the planning in'ormation.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
51/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
52/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the 7!ine Service①
②
③④
⑤
C fi i th P2P T t%
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
53/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the P2P Transparent%y
Trans3itte 7!ine Service @1A
-et Service #/Service
Na3e according to the
design.
-et irection to 5N#
5N#. 4cept 'or :in:)
ased 4)Line services,
select 5N#5N# 'or all the
other 4)Line services.
-elect a source port and
a sin1 port. -elect a oard
'rom the &oar drop)down
list, and then select an
availale port.
The values o' the
7ncapsu%ation Type parameter
o' the ports must e the same.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
54/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the P2P Transparent%y
Trans3itte 7!ine Service @2A
C f
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
55/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the V!6N&ase 7!ine
Service @1A
-et Service #/Service
Na3e according to the
design)
-et irection to 5N#
5N#. 4cept 'or :in:)
ased 4)Line services,
select 5N#5N# 'or all theother 4)Line services.
-elect a source port and
a sin1 port. Then,
con'igure the source %LA#
and the sin1 %LA#.
-elect a source port and
a sin1 port. -elect a oard
'rom the &oar drop)down
list, and then select an
availale port.
The values o' the
7ncapsu%ation Type parameter
o' the ports must e the same.
C fi i th V!6N & 7 !i
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
56/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
①
②
③ ④
A'ter the corresponding
%LA# 'orwarding tale item
is created, the %LA# 9s o'
the service pac1ets can e
switched at the source or
sin1 end o' the 4)Line
service. 9' the %LA# 9s atoth the source end and the
sin1 end are the same, you
do not need to create the
%LA# 'orwarding tale item.
Configuring the V!6N&ase 7!ine
Service @2A
C fi i th >i > & 7 !i
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
57/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >in>&ase 7!ine
Service @1A
Clic1 Sin". 9n the dialog
o that is displayed,
select the selected :in:
lin1 and clic1 OB.
9' you 'orgot to create a
:in: lin1, create one y
clic1ing Create >in> !in".
-et Service #/Service
Na3e according to the design)
-et irection to 5N#5N# or
NN#NN#. 5N#NN# indicates
that services are accessed
through ports to the :in: lin1.
oth source and sin1 o' ##9)##9 are the :in: Lin1.
-elect a source port and a
sin1 port. 9' irection is set to
5N#5N#, the source is a port
and the sin1 is the :in: lin1. 9'
irection to NN#NN#, oth the
source and the sin1 are :in:
lin1.
C fi i th >i > & 7 !i
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
58/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >in>&ase 7!ine
Services @2A
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
59/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
60/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con(!urin! t)e 7RPS
①
②③
④
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
61/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con(!urin! t)e 7RPS -et 7RPS # according to the design. The 4"/- 9
must e uni
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
62/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con(!urin! t)e 7RPS
o%Off Ti3e speci'ies the hold)o'' time o' the 4"/-
hold)o'' timer. 9' only the 4"/- eists, set this parameter
to 0. 9' the 4"/- coeists with the LA( protection, set
this parameter to +00 ms.
uar Ti3e speci'ies the guard time o' the 4/"-
guard timer. 9t is recommended that you use the de'ault
value +00 ms.
7ntity !eve% speci'ies the level o' the maintenance
entity according to the design.
=TR Ti3e speci'ies the +T" time o' the +T"
timer in the case o' 4"/- protection. 9t is
recommended that you use the de'ault value +.
Pac"et Trans3it #nterva% speci'ies the interval'or transmitting the ")A/- pac1ets. 9t is
recommended that you use the de'ault value +.
C fi ti f 7th t S i
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
63/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
64/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the 7!6N Service
①
②
③
④
⑤
Configuring the )02 1 &rige&ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
65/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.1 &rige&ase
7!6N Service @1A
-et Service #/Service
Na3e according to the
design.
-elect TagTransparent
'rom the Tag Type drop)down
list.
-et whether to enale the
3AC address sel')learning
'unction. 9' the 3AC sel')
learning 'unction o' an
4thernet LA# is enaled, the
4thernet LA# learns an 3AC
address according to the
original 3AC address in the
pac1et and automaticallyre'reshes the 3AC address
'orwarding tale.
Configuring the )02 1 &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
66/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-elect a oard 'rom the&oar drop)down list.
-elect a port o' the oard. Clic1
the right arrow to add the selected
port to the list o' selected ports.
Configuring the )02.1 &rige&ase
7!6N Service @2A
Configuring the )02 1 &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
67/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'igured
ports
Clic1 Net.
Configuring the )02.1 &rige&ase
7!6N Service @:A
Configuring the )02 1 &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
68/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Create a split hori@on
group as re
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
69/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-elect Sp%it ori-on
roup to create a split
hori@on group as re
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
70/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.14 &rige&ase 7
!6N Service @1A
-et Service #/Service
Na3e according to the
design.
-elect C6'are 'rom the
Tag Type drop)down list.
-et whether to enale the
3AC address sel')learning
'unction. 9' the 3AC sel')
learning 'unction o' an
4thernet LA# is enaled, the
4thernet LA# learns an 3AC
address according to the
original 3AC address in the
pac1et and automatically
re'reshes the 3AC address'orwarding tale.
Configuring the )02 14 &rige &ase 7
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
71/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.14 &rige&ase 7
!6N Service @2A
Con'igure the *#9 port. -elect a oard 'rom the&oar drop)down list, and then select a port.
-et V!6N o' each port according to the design.
Configuring the )02 14 &rige &ase 7
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
72/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.14 &rige&ase 7
!6N Service @:A
Configuring the )02 14 &rige &ase 7
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
73/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.14 &rige&ase 7
!6N Service @;A
-elect Sp%it ori-on
roup to create a split
hori@on group as re
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
74/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.1a &rige &ase
7!6N Service @1A
9n the case o' the ;02.&adridge)ased 4)LA#
services, con'igure the *#9
port and the ##9 port.
Con'igure the *#9 port 'irst.
-et Service #/Service
Na3e according to the
design.
-elect S6'are 'rom the
Tag Type drop)down list.
-et whether to enale the
3AC address sel')learning
'unction. 9' the 3AC sel')
learning 'unction o' an
4thernet LA# is enaled, the
4thernet LA# learns an 3AC
address according to the
original 3AC address in the
pac1et and automatically
re'reshes the 3AC address
'orwarding tale.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
75/106
Configuring the )02 1a &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
76/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.1a &rige&ase
7!6N Service @:A
Configuring the )02 1a &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
77/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.1a &rige&ase
7!6N Service @;A
Con'igure the *#9 port. -elect a oard 'rom the
&oar drop)down list, and then select a port.
-et SV!6N o' each port according to the design.
Configuring the )02 1a &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
78/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.1a &rige&ase
7!6N Service @+A
Configuring the )02 1a &rige &ase
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
79/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the )02.1a &rige&ase
7!6N Service @,A
-elect Sp%it ori-on
roup to create a split
hori@on group as re
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
80/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
C f > S
Changing theports that use
the - domain
Creating a
port policy
Creating a
- domain
Creating
the tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
81/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
①
②③
④
The pti! "T# $00 has a de'ault - domain, 'or which *apping Re%ation # is set to 1 and
*apping Re%ation Na3e is set to efau%t *ap. e'ore another - domain is created, all the ports
elong to this de'ault - domain. The de'ault - domain cannot e modi'ied or deleted.
y creating a i''-erv 7-8 domain, you can create the mapping relation o' a new - domain and con'igure the ports that
use this mapping relation.
/2/ transparently transmitted services support mapping the /H service classes ased on the -C/ type only. The
de'ault -, however, maps the /H service classes according to the CLA# priorities. Hence, you need to con'igure a new-.
C fi i th > S
Changing theports that use
the - domain
Creating a
port policy
Creating a
- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
82/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS *apping Re%ation # indicates the 9 o' the mapping
relation etween - domains. The value ranges 'rom 2 to
;.
*apping Re%ation Na3e indicates the name o' themapping relation etween - domains. -et this parameter
according to the design.
Pac"age Type indicates the type o' the pac1et. The
pac1ets trusted y the pti! "T# $00 are the CF%LA#,
-F%LA#, and 9/ -C/ pac1ets that carry the CF%LA#
priority, -F%LA# priority, or -C/ value. The untrusted
pac1ets are mapped to the 4 service level y de'ault and
'orwarded in est e''ort mode. The /2/ transparentlytransmitted 4)Line service supports only the mapping 'rom
-C/ pac1ets to the /H service class.
#ngress *apping Re%ation indicates mapping relations
etween the priorities o' ingress pac1ets and /H service
levels.
7gress *apping "elation indicates mapping relations
etween the priorities o' egress pac1ets and /H servicelevels.
C f > S
Changing theports that use
the - domain
Creating a
port policy
Creating a
- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
83/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
①
②③
④
-elect a mapping relation to e changed.
⑤
⑥
y changing the ports that use the - domain, you can add or delete a port that uses the -
domain and set the pac1et type over the port.
The de'ault - domain cannot e modi'ied or deleted.
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
84/106
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
85/106
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
86/106
C fi i th > S
Changing theports that use
the - domain
Creating a
port policy
Creating a
- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
87/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS y creating the tra''ic, you can con'igure ACL and CA" 'or a speci'ied tra''ic stream on a speci'ied
port.
This tas1 is reoS
Changing theports that use
the - domain
Creating a
port policy
Creating a- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
88/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
> 9 o' the tra''ic classi'ication.
-et whether the ACL action
is allowed or not.
A'ter you clic1 6 or e%ete, comple tra''ic
classi'ication can e per'ormed on the tra''ic that enters the
ingress port according to the preset matching rules.
-elect a match type. The match
values o' the match types are
-C/ %alue 0 to 65
C%lan 9 & to 0$
C%lan priority 0 to -%lan 9 & to 0$
-%lan priority 0 to
CoS speci'ies the /H service class
S
Changing theports that use
the - domain
Creating aport policy
Creating a- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
89/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS A'ter creating a port policy, you need to set the port that uses the port policy. Through this tas1,
you can con'igure ACL and CA" 'or a speci'ic tra''ic stream on a speci'ied port.
①
②
③
④
⑤
C fi i th > S
Changing theports that use
the - domain
Creating aport policy
Creating a- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
90/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
①
②③
④
-elect a oard 'rom the &oar
drop)down list in the 6pp%ie Port
pane.
-elect a port to e used
in 6vai%a8%e Port.
C fi th > S
Changing theports that use
the - domain
Creating aport policy
Creating a- domain
Creatingthe tra''ic
-etting the port thatuses the port policy
Con'iguringport shaping
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
91/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configure the >oS y con'iguring port shaping, you can con'igure tra''ic shaping 'or a port or an egress port
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
92/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
-et the slot 9.
-et the port.
-et C#R, C&S, P#R,
and P&S according to
the design.
Configurations of 7thernet Services
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
93/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services Setting the Para3eters of 7thernet Ports
Setting the Para3eters of #$?7T Ports Configuring the !6
Configuring the >in> !in"
Configuring the 7!ine Service
Configuring the 7RPS
Configuring the 7!6N Service
Configuring the >oS
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
94/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Verifying 7thernet Service Configurations A maintenance domain 738 de'ines the range and level o' the 4thernet A3. 3s o' di''erent
ranges and levels can provide users with di''erentiated A3 services.①
②
③④
⑤
⑥
⑦
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
95/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Verifying 7thernet Service Configurations
This tas1 is re
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
96/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
①
②
③④
⑤
⑥
⑦
An 3 can e divided into several independent maintenance associations 73As8. y creating 3As,
you can associate speci'ic 4thernet services with 3As. This 'acilitates 4thernet A3 operations.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
97/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-et *aintenance 6ssociation Na3e to the value o'
*aintenance 6ssociation Na3e that is set in the preceding
step.
*aintenance 6ssociation Na3e the values set on two #4s
must e the same.
-et Re%evant Service to the same service 'or the two #4s.
-et CC Test Trans3it Perio to 1s.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
V if i 7th t S i C fi ti
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
98/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
①
②
③④
⑤
⑥
⑦
An 34/ is the starting and end positions o' all the A3 pac1ets. y creating an 34/, you can
chec1 the 4thernet channel o' the 34/s that elong to a same 3A through the A3 operation.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
99/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-et *aintenance 6ssociation Na3e to the value o' *aintenance 6ssociation Na3e that is
set in the preceding step.
-et &oar and Port to the 4thernet ports involved in the service test.
-et *P # to di''erent values 'or 34/s in the same 3.
9n this eample, 4thernet services etween two internal #4s on the transport networ1 are tested.
Hence, set irection to #ngress for the *7Ps.
The 3/ 9 is used to identi'y the 34/ during the L test. Hence, set CC Status to 6ctive.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
V if i 7th t S i C fi ti
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
100/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
①
②
③④
⑤
⑥
⑦
To ensure that an 34/ can respond to the A3 operations initiated y the other 34/s in
the same 3A, you need to set the other 34/s to e the remote 34/s o' this 34/.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
101/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-et *aintenance o3ain Na3e to the value o' *aintenance o3ain Na3e that is set in the
preceding step. -et *aintenance 6ssociation Na3e to the value o' *aintenance 6ssociation Na3e that is set
in the preceding step.
9' other 34/s may initiate A3 operations to an 34/ in the same 3A, set the other 34/s to e
the remote 34/s.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
V if i 7th t S i C fi ti
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
102/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
①
②
③④
⑤
⑥
⑦
uring a loopac1 7L8 test, you can chec1 the idirectional connectivity etween the source
34/ and any 34/ in the same 3A.
Verifying 7thernet Service Configurations
Creating
an 3A
Creating an
34/ point
Creating
an 3
Creatingremote 34/s
in an 3A
Testing4thernet
services
V if i 7th t S i C fi ti
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
103/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
-elect *P # i' the L test is per'ormed on the asis o' 3/ 9s.
-ource
maintenance point
in the L test
estination
maintenance point
in the L test
Trans3itte Pac"et Count speci'ies the numer o' pac1ets transmitted each time in the L test. Theduration gets longer with the increase o' numers.
Trans3itte Pac"et !ength speci'ies the length o' a transmitted L3 pac1et. 9' the pac1et length is
di''erent, the test result may e di''erent. 9n normal cases, it is recommended that you use the de'ault value.
Trans3itte Pac"et Priority speci'ies the priority o' transmitted pac1ets. 0 indicates the lowest priority,
and indicates the highest priority. 9n normal cases, it is recommended that you set this parameter to the
highest priority.
Verifying 7thernet Service Configurations
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
104/106
Su33ary
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
105/106
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Su33ary
escries service types o' the pti! "T# $00 %&00"002
escries how to con'igure the radio lin1s o' pti! "T# $00
%&00"002
escries how to con'igure the T3 services o' the pti!
"T# $00 %&00"002
?ocuses on how to con'igure 4thernet services o' the pti!
"T# $00 %&00"002
8/20/2019 OptiX RTN 900 V100R002 Configuration Guide-20100119-A
106/106
www.huawei.com
hank
Top Related