7/29/2019 Opensuse12 2 Install Plus Amarok
1/9
4.2 DVD Installation
When you're ready, insert the DVD and (re)start the computer. Live CD/USB installation is described below.
Welcome
The first thing you'll see is this welcome screen.
Start Installation
Then you're presented with a menu.
Here you can select your desired language and a few other options,afterwards begin installation.
Language and Licence
The licence agreement is only to inform you of your rights. It doesn't
require your acceptance, since it doesn't limit your use.
Check that language and keyboard layout are as desired.
Installation Mode
Here you choose whether to perform a new installation or upgrade an
existing openSUSE installation.
Clock and Time Zone
http://opensuse-guide.org/images/installation/dvd/inst-mode.pnghttp://opensuse-guide.org/images/installation/dvd/inst-welcome.pnghttp://opensuse-guide.org/images/installation/dvd/grub.jpghttp://opensuse-guide.org/images/installation/dvd/welcome.png7/29/2019 Opensuse12 2 Install Plus Amarok
2/9
Set the timezone here.
If you have only GNU/Linux it's recommended to set the hardware clock to
UTC, if you dual boot with MS Windows set it to local time.
Desktop Selection
Various different graphical user interfaces (desktop environments) exist forGNU/Linux. KDE is preselected and is preferred by about 70% of
openSUSE users and is also the focus of this guide.
Under "Other" you can select LXDE, Xfce, minimal graphical environment
(IceWM) and even a text based system which is useful for servers.
Partitioning
By default openSUSE will propose to create three new partitions / (root) for
system files, /home/ for personal files of users and swap which is used as a
supplement for RAM, similar to the page file in MS Windows.
If you're performing a dual boot installation, be extra careful here.
Note that Linux labels disks/partitions using the following scheme -sda1 isfirst partition on the first disk,sdb3 is the third partition on the second disk,
and so forth. Partitions that will be formatted are written in red text.
Create New User
Now it's time to create your user. Note that by default the root user(administrator) password will be the same as the password for the normal
user.
If you want the added security of a separate root password, consider
unchecking that checkbox. You may also want to consider disabling
autologin to prevent people from easily accessing your system and data.
Installation SettingsDouble check that everything is as desired - this is the point of no
return!
Actual Installation
http://opensuse-guide.org/images/installation/dvd/inst-overview.pnghttp://opensuse-guide.org/images/installation/dvd/inst-user.pnghttp://opensuse-guide.org/images/installation/dvd/inst-disk.pnghttp://opensuse-guide.org/images/installation/dvd/inst-desktop.pnghttp://opensuse-guide.org/images/installation/dvd/inst-time.png7/29/2019 Opensuse12 2 Install Plus Amarok
3/9
Now the actual installation is performed.
Automatic Configuration
After installation is performed, the system will restart and performautoconfiguration.
And finally your brand new openSUSE system will start. Congratulations,and have a lot of fun with openSUSE!
4.3 Live CD/USB InstallationWhen you're ready to install, insert the CD/USB and (re)boot the computer.
The Live CD/USB provides two different installation modes, you can install directly from the boot menu, oryou can boot the system and install from the desktop while the system is running, by clicking on the install
icon on the desktop. There is only a visual difference between the two modes of installation. It's
recommended to try booting the live system before installing to see if your hardware components aresupported.
Language and License
The licence agreement is only to inform you of your rights. It doesn't
require your acceptance, since it doesn't limit your use.
Check that language and keyboard layout are as desired.
Clock and Time Zone
Set the timezone here.
If you have only GNU/Linux it's recommended to set the hardware clock to
UTC, if you dual boot with MS Windows set it to local time.
Partitioning
http://opensuse-guide.org/images/installation/live/live-time.pnghttp://opensuse-guide.org/images/installation/live/live-welcome.pnghttp://opensuse-guide.org/images/installation/dvd/inst-autoconfig.pnghttp://opensuse-guide.org/images/installation/dvd/inst-inst.png7/29/2019 Opensuse12 2 Install Plus Amarok
4/9
By default openSUSE will propose to create three new partitions / (root) forsystem files, /home/ for personal files of users and swap which is used as a
supplement for RAM, similar to the page file in MS Windows.
If you're performing a dual boot installation, be extra careful here.
Note that Linux labels disks/partitions using the following scheme -sda1 is
first partition on the first disk,sdb3 is the third partition on the second disk,and so forth. Partitions that will be formatted are written in red text.
Create New User
Now it's time to create your user. Note that by default the root user
(administrator) password will be the same as the password for the normaluser.
If you want the added security of a separate root password, consider
unchecking that checkbox. You may also want to consider disablingautologin to prevent people from easily accessing your system and data.
Installation Settings
Double check that everything is as desired - this is the point of no
return!
Actual Installation
Now the actual installation is performed.
Automatic Configuration
When all packages are installed, the system needs to reboot from the
harddrive.
You can either remove the CD/USB during the reboot process or leave it inand selectBoot from harddiskat the boot menu.
After the reboot, the system will perform automatic configuration.
http://opensuse-guide.org/images/installation/live/live-done.pnghttp://opensuse-guide.org/images/installation/live/live-installation.pnghttp://opensuse-guide.org/images/installation/live/live-settings.pnghttp://opensuse-guide.org/images/installation/live/live-user.pnghttp://opensuse-guide.org/images/installation/live/live-partition.png7/29/2019 Opensuse12 2 Install Plus Amarok
5/9
Afterwards your brand new openSUSE system will start. Congratulations,and have a lot of fun with openSUSE!
http://opensuse-guide.org/installation.php
http://opensuse-guide.org/installation.phphttp://opensuse-guide.org/installation.php7/29/2019 Opensuse12 2 Install Plus Amarok
6/9
13. Multimedia Codecs
This chapter describes three different methods for installing the packages needed to playback most
multimedia formats - including MP3, DVDs etc., with Kaffeine (video) and Amarok (audio). You can use 1-
Click Install, manual installation or use the command line - whichever method you prefer.
By default only free, open, non-patent encumbered formats such as Ogg Theora, Ogg Vorbis and Flac are
supported for legal reasons (US software patents and Digital Millennium Copyright Act (DMCA)).
13.1 Codec Installation with 1-Click
Click on the button below to install multmedia codecs with 1-click install.
Note, if you get a warning dialog like this don't panic! Simply select the top option, to allow changing thevendor for some packages from openSUSEtoPackman, then clickOK -- Try Again.
13.2 Manual Codec Installation
You can install the packages manually instead if you prefer.
First add the repositories with YaST Software Repositories:
Packman Repository
libdvdcss repository (skip if you don't need DVD playback)
If the concepts ofpackage managerand repositories are foreign to you, revisit the chaptersInstalling Software andSoftware Repositories.
Then install the following packages with YaST Software Management:
libxine2-codecs
k3b-codecs
ffmpeg
lame
gstreamer-0_10-plugins-bad
gstreamer-0_10-plugins-ugly
gstreamer-0_10-plugins-ugly-orig-addon
gstreamer-0_10-plugins-ffmpeg
libdvdcss2 (skip if you don't need DVD playback)
http://opensuse-guide.org/installpackage.phphttp://opensuse-guide.org/repositories.phphttp://opensuse-guide.org/repositories.phphttp://opensuse-guide.org/images/screenshots/conflict.pnghttp://opensuse-community.org/codecs-kde.ymphttp://opensuse-guide.org/repositories.phphttp://opensuse-guide.org/installpackage.php7/29/2019 Opensuse12 2 Install Plus Amarok
7/9
13.3 Codec Installation in the Terminal
To install codecs using the terminal instead, do these steps:
Add the needed repositories (skip the dvd repo if you don't need DVD playback):zypper addrepo -f http://ftp.gwdg.de/pub/linux/packman/suse/12.2/ packman
zypper addrepo -f http://opensuse-guide.org/repo/12.2/ dvd
Then install the necessary packages (skip libdvdcss2 if you don't need DVD playback):
zypper install libxine2-codecs k3b-codecs ffmpeg lame gstreamer-0_10-plugins-bad gstreamer-0_10-plugins-
ugly gstreamer-0_10-plugins-ugly-orig-addon gstreamer-0_10-plugins-ffmpeg libdvdcss2
You may be asked if you want to allow vendor change for some packages - allow it.
Use Copy/Paste to avoid typos. To paste in Konsole right click mouse => Paste - or use
Ctrl+Shift+V.
15. Graphics DriversNote that there's no need to install the below non-free video drivers, if the free drivers used by default work
for your needs.
15.1 NvidiaClick on the button corresponding to your Nvidia graphics card to install the driver with 1-click install.
Afterwards reboot your computer.
15.1.1 Install Nvidia Driver in the TerminalYou can install the Nvidia driver in the terminal instead if you prefer.
First add the repository:zypper addrepo -f ftp://download.nvidia.com/opensuse/12.2/ nvidia
Then install the package which corresponds to your graphics card:
ForGeForce 6 and laterzypper install x11-video-nvidiaG02ForFX5xxx
zypper install x11-video-nvidiaG01
ForGeForce 4 and older
zypper install x11-video-nvidia
Finally reboot.
15.2 ATI/AMD
ForRadeon HD5xxx and laterSee http://en.opensuse.org/SDB:AMD_fglrx
http://en.opensuse.org/SDB:AMD_fglrxhttp://opensuse-community.org/nvidia-legacy.ymphttp://opensuse-community.org/nvidia-fx5xxx.ymphttp://opensuse-community.org/nvidia.ymphttp://en.opensuse.org/SDB:AMD_fglrx7/29/2019 Opensuse12 2 Install Plus Amarok
8/9
ForRadeon HD2xxx to HD4xxxSee http://en.opensuse.org/SDB:AMD_fglrx_legacy
For ATI cards older than HD2xxx your only option is to stick with the default free driver.
15.3 Intel
The 3D drivers for Intel graphics cards are free software, and can therefore be included in openSUSE out of
the box. No additional installation or configuration is needed.
16. Wireless Driver Installation
Most of the time wifi will just work out of the box. In these cases you'll be able to configure your wirelesscard using the NetworkManagement widget which you should find running in your system tray.
16.1 Find Out Which Chipset
If your wireless card isn't supported out of the box, chances are you can make it work fairly easily.
The first step is running this command to find out which chipset is on the card. The chipset is what matters,
the make and model of the device is basically of no importance.hwinfo --wlan --short
Now that you know which chipset is on your card, you can start figuring out what is required to make thechipset work in openSUSE - usually you'll just need to install a driver and/or some firmware.
16.2 Recent Broadcom Chipset
The following chips are supported by the proprietarybroadcom-wl driver: bcm4312, bcm4313, bcm4321,
bcm4322, bcm43224, bcm43225, bcm43227, bcm43228.
16.2.1 Install broadcom-wl with 1-Click
If you have one of those chips, you can install the broadcom-wl driver with 1-click install by clicking thebutton below and following instructions:
16.2.2 Manual Installation of broadcom-wlIf you prefer, install the packages manually instead:
1)
Find out which kernel flavouryou have (desktop, default, xen, pae), by running:
uname -r
2)
http://en.opensuse.org/SDB:AMD_fglrx_legacyhttp://www.broadcom.com/support/802.11/linux_sta.phphttp://www.broadcom.com/support/802.11/linux_sta.phphttp://opensuse-community.org/broadcom-wl.ymphttp://opensuse-guide.org/images/screenshots/hwinfo.pnghttp://opensuse-guide.org/images/screenshots/pnm.pnghttp://en.opensuse.org/SDB:AMD_fglrx_legacyhttp://www.broadcom.com/support/802.11/linux_sta.php7/29/2019 Opensuse12 2 Install Plus Amarok
9/9
Add thePackman Repository:
If the concepts ofpackage managerand repositories are foreign to you, revisit the chapters Installing
Software and Software Repositories.
3)
Install the following packages with YaST or zypper:
broadcom-wl
broadcom-wl-kmp-[kernel flavour]
16.3 Older Broadcom ChipsetIf you have an older Broadcom chip supported by the, free, reverse-engineered b43 driver, i.e.: bcm4303,
bcm4306, bcm4309, bcm4311, bcm4318, you only need to install the firmware. This is automated by simply
running this command and rebooting afterwards (make sure the package b43-fwcutteris installed and thatyou are online while running the command):
install_bcm43xx_firmware
16.4 Atheros ChipsetAtheros are working with the Linux-kernel developers towards providing support for all their wireless
chipsets in the mainline Linux-kernel, via theath5kandath9kdrivers, so most atheros cards should just
work.
16.5 Intel ChipsetIntel are cooperating quite well with the Linux-kernel developers and all Intel wifi chips should just work.
16.6 Other Chipsets
If your chipset manufacturer is not mentioned above, search the web foropensuse [your chipset] and you're
likely to find information on how to get it working.
There's a software repository with drivers for e.g. Ralink and Realtek wireless chips. You can add it with this
command:zypper addrepo -f http://download.opensuse.org/repositories/driver:/wireless/openSUSE_12.2 wireless
http://opensuse-guide.org/installpackage.phphttp://opensuse-guide.org/installpackage.phphttp://opensuse-guide.org/repositories.phphttp://linuxwireless.org/en/users/Drivers/b43#Supported_chip_typeshttp://linuxwireless.org/en/users/Drivers/ath5k#supported_chipshttp://linuxwireless.org/en/users/Drivers/ath5k#supported_chipshttp://linuxwireless.org/en/users/Drivers/ath5k#supported_chipshttp://linuxwireless.org/en/users/Drivers/ath9k#supported_chipsetshttp://linuxwireless.org/en/users/Drivers/ath9k#supported_chipsetshttp://linuxwireless.org/en/users/Drivers/ath9k#supported_chipsetshttp://opensuse-guide.org/installpackage.phphttp://opensuse-guide.org/installpackage.phphttp://opensuse-guide.org/repositories.phphttp://linuxwireless.org/en/users/Drivers/b43#Supported_chip_typeshttp://linuxwireless.org/en/users/Drivers/ath5k#supported_chipshttp://linuxwireless.org/en/users/Drivers/ath9k#supported_chipsetsTop Related