VRU VAV READY UNIT
Traditional VAV control installations require cumbersome, time consuming and costly field assembly in tight overhead spaces. Units must then be programmed and tested.
Johnson Controls now provides a turnkey, single source, streamlined solution that saves you both time and money. It’s the ideal solution for renovation projects and for new construction that requires multiple VAV units.
Ready to go. Ready to save. The new Johnson Controls VAV Ready Unit (VRU) comes preassembled with factory installed piping and pre-commissioned, factory installed controls. This increases labor efficiencies on the job site, minimizing startup time. An integrated project delivery approach ensures proper zone control and on-time delivery by quadrant as required by the project team. The VRUs will ship on demand per your standard, regardless of the location. Plus, Johnson Controls industry leading VAV terminal units, hydronics and controls seamlessly integrate into your building’s systems.
The results? You’ll reduce energy costs, get improved comfort throughout the facility and reduce cost of ownership.
One way to maximize value is to mitigate risk
• Decrease time to completion • Reduce installation cost • Simplify startup with factory installed and commissioned controls
• Reduce changes and change orders
• Streamline implementation with s ingle-source responsibility
• Reduce cost of ownership
• Meet deadlines with on-demand shipping
• Earn LEED® certification points • Improve energy efficiency
Printed on recycled paper. LEED ® is a registered trademark owned by the U.S. Green Building Council® and is used with permission.LonWorks® is a registered trademark of Echelon Corporation. BACnet® is a registered trademark of American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE).
Johnson Controls and the Johnson Controls logo are registered trademarks and FlowStarTM is a trademark of Johnson Controls, Inc. in the United States of America and other countries. Other trademarks used herein may be trademarks or registered trademarks of other companies. © 2014 Johnson Controls, Inc. P.O. Box 423, Milwaukee, WI 53201. All rights reserved worldwide. Printed in USA PUBL-7444www.johnsoncontrols.com
VAV READY CONTROL SOLUTION
Sliding door controls enclosure with factory mounted MSTP BACnet DDC VAV controller
Externalcontrols disconnect
Wireless controls transmitter
Electrical wiring from ATC to controller in flex conduit
Valve/Actuator control assembly
Stainless steel hoses with quick NPT connections
Integrated shipping supports and handles
Pressure gauge to ensure integrity of sealed system during installation
Discharge air temperature sensor probeVAV box inlet
with FlowStarTM sensor
Piping package coil options including Y-strainer with drain valve and return shut-off handle
Hot water coil
Coil header with 3/4 inch pipe mounting on 6 inch center with top/bottom air vents installed at highest point of coil for proper water drainage
Product specifications VAV Product• Single duct & fan powered terminal units• Liner(s) - closed cell foam, fiberglass, foil-faced or double wall metal lined
• Access door - hinged with cam lock
Hot Water Coils• AHRI 410 certified and labeled • 1-, 2-, 3-, 4- row coils• Coil tubing - 1/2 inch outside diameter x 0.016 inch copper
Hydronics • Pressure tested and shipped pressurized to the job site to ensure a leak-proof assembly
• Standard & custom piping configurations available
• Y-strainer, Automatic Temperature Control (ATC) valves, manual air vents, balancing valve
• Piping packages are 6 inch on center 3/4 inch pipe with 1/2 inch control valve regardless of terminal unit size
Controls• DDC controls are factory mounted, wired, addressed and pre-commissioned with a configured application program which is loaded with VRU specific operating parameters
• BACnet®, LonWorks®(1), with option for wireless• Factory mounted & wired discharge air temperature sensor
Options• Controls enclosure with sliding front cover
Union Labeled: Made in the USA with Pipefitter Sheetmetal Union laborNote (1); LonWorks controls are configured and addressed in the field
Lower cost of ownership. The VRU lowers lifecycle cost, not only by reducing installation costs, but also by increasing energy efficiency, and can be categorized as a depreciable asset. You’ll get high quality construction that you expect from Johnson Controls backed by our standard warranty. And we can ensure product standardization throughout your building, regardless of the installing contractor or project location.
Start saving time now. We‘ll ensure VRUs are built and delivered exactly as specified. All components are engineered to deliver performance that fits your needs, and units are shipped directly to the job site on specially packaged pallets to minimize delivery costs.
For more information about the VRU, please contact your Johnson Controls Authorized Building Controls Specialist (ABCS).
Top Related