Download - Occox by Demtech - M2M remote wireless supervision

1/23WWW.OCCOX .FR - WWW.DEMTECH.NET

COPYRIGHT © DEMTECH SAS 2013-2014

For ANY EQUIPEMENT

ANYWHERE

ANYTIME

From FIXED or MOBILE devices

REMOTE WIRELESSSUPERVISION

OCCOX - M2M CHANNEL

2/23WWW.OCCOX.FR - WWW.DEMTECH.NET


DEMTECH

The company was founded in 2007 by Jean DEMARTINI while he was Full-Professor at the University of Nice Sophia-Antipolis. He was member of the Electronics Department of the Ecole Polytechnique Universitaire of Nice-Sophia-Antipolis as Researcher and Expert in electronics, automation, signal processing, embedded computing architectures and ultra-low power electronic programmingPr. Jean DEMARTINI

CEO

DEMTECH S.A.S.Espace INCOM250 route du Tiragon06370 Mouans-SartouxT. +33 9 72 34 64 25

[email protected]

DEMTECH develops, produces and markets Remote Flexible Supervision systems for supervision and control of large parks of industrial machinery and equipments, through the mobile phone network.



For what purpose ?



Motivations for RFS*

When equ ipment runs on a lim ited stock of raw materia l or resource (e.g. fuel), shortage causes a service interruption.

RESOURCES MANAGEMENT

For standalone equipment, operating without human monitoring, vandalism, theft or failure can cause interruption of service, nuisance or damages.

SECURITY MANAGEMENT

<

For equipments optimized to operate in specific operating conditions, any drift of the parameters or the setup points leads to a loss of quality.

QUALITY MANAGEMENT

Competitiveness requires optimized maintenance and control costs, together with a permanent quest for greater productivity : reduce travel, improve diagnosis, act in real time.

PRODUCTIVITY MANAGEMENT

RFS : Remote Flexible Supervision



Functional Requirements of a RFS

Accessibility to a reliable telecom network

Periodic telemetry and remote control

On demand alarms and remote control

INDEPENDANT OF THE FIELD NETWORK TO SUPERVISE

SYNCHRONOUS BIDIRECTIONAL COMMUNICATION

ASYNCHRONOUS BIDIRECTIONAL COMMUNICATION



Technical Architecture by DEMTECH

OCCOXGateways associated to the field equipments

M2M CHANNELRobust and reliable bidirectional telecom connection

on the mobile phone network

SURICATESupervisory Control And Data Acquisition Platform



Standard communication Port on your engines?

Plug&play. No applicative software to embed. Parameterizable. Remotely Supervisable.

OCCOX Gateways :M2Mchannel/RS485 – M2Mchannel/USB – M2Mchannel/Ethernet – M2Mchannel/RS232 – ...

PLC

OCCOX Gateway

Standard communication Port

M2M Channel



Sensors and Actuators...but no communication Port

OCCOX modules :RS485/Contacts – RS485/Relais – RS485/Analog – RS485/RS232 – RS485/Ethernel – …

Sensors/Actuators w ith standard interfaces

OCCOX modules

OCCOX Gateway : M2Mchannel/RS485

RS485/Modbus RTU

M2M Channel



OCCOX : example

Same concept, same service, several types of configuration...

… according to the site situation and operational needs.



SIM card & Telecom subscription

● It is identified with an IMEI number (International Mobile Equipment Identity). The IMEI number allows to inhibit the mobile equipment in case of theft or loss.

● It needs a M2M SIM card (Subscriber Identity Module) subscribedto a Mobile Telecom Operator.

A GATEWAY IS A TELECOM EQUIPMENT

● Usual mobile subscription is not suitable for this purpose

M2M SUBSCRIPTION PACKAGE ADAPTED TO DATAS TRAFFIC



Communicate on the mobile network

To be independent from final customer network.To communicate, on demand, using server mode,

on a safe and reliable way.

GSM ?

EDGE ?

GPRS ?

4G ?

3G ?

Is it possible to set up a robust two-waycommunication channel on mobile network?



The M2M Channel

DEMTECH has developed a communication protocol operating between layers 2 ans 3 of OSI model, in order to make IP/GPRS protocol more reliable : the “M2M Channel”.

This communication protocol allows to guaranty the two-way data traffic, whatever the Mobile Telecom Network operating



SuricatePlateform for Remote Supervision

Internet

M2M CHANNEL

Suricate

Telco OperatorPrivate Network

M2M CHANNEL Telco OperatorAccess Point



Suricate

Suricate : structure

Recorder-ProxyDataBase

Generic Web Application

in SaaS Mode

Third-Party Application

-Home software

Monitoring

M2M CHANNELS

DataBase (optional)

15/23WWW.OCCOX .FR - WWW.DEMTECH.NET


Suricate-Proxy

If you already use a SCADA home software Suricate-Proxy enables a third-party application to have

direct access to supervised equipments, through mobile telecom network,▬ easily,▬ in a secure way.

Most of SCADA network applications can use Suricate-Proxy without any modification.



Suricate-Recorder

Used to record every configuration itmes :▬ Customer accounts▬ Connected modules and running M2M channels▬ Field alarms and events (data history)▬ Tracing of all events and interventions

Suricate-Recorder can be used with a third-party application through a dedicated web-service.



Suricate-Monitoring

Management tool able to :▬ Create and manage customer accounts▬ Set in modules parameters and monitor :

● Sensor and meta-sensor● Alarm triggers● Warning messages and Intervention scripts● Authorizations● Escalating process and dedicated team● etc.

▬ Activation / Deactivation▬ Design management reports



Suricate-WAG-SaaS

Generic Web Application which can be accessed online in SaaS mode :▬ Collecting information from supervised equipments▬ Providing alarms and warning from field

equipments▬ Updating authorized recipients list▬ Remote control operating▬ Providing monitoring screens▬ Providing figures and graphs▬ Providing operation reports▬ Operating a MIS (management information system)▬ Importing/exporting datas▬ etc.



Geographic location



Sensors and Triggers monitored



Historic graphs and figures



Reports sent by email



References