Features and Benefits

Technical Data(Patent Pending)

Items Description Holding ValuesAllowable load / Ultimate loadNinja drive pin with angle clip and washer

Light weight withdecking 3000 PSI 4000 PSI

Item# Shank Dia. Shank length Tension(lbs)Tension

(lbs)Shear(lbs)

Shear(lbs)

NC100NC125S

0.157’’/0.167’’

1’’1-1/4’’

372/1860352/1767

175/957157/861

329/1644296/1479

377/1885358/1790

Lowest noise (db) level of any powder tool on the marketConsistent low noise even in fractured concreteOne pin and clip allows usage in multiple applicationseliminating need for multiple inventories and moreflexibility in pre-tying wires for jobs.Heavy duty shank for higher holding strengthsLightest celing tool weighing under 3-1/2 lbs.No recoil, reducing operator fatigueNo piston to wear or break, ensuring low maitenanceallowing longer tool operation.Simple and light weight to operate with adjustible lengthpole.Specially designed rubber handle makes it comfortableand non-conductive.Tool & pin provide dual guidance system to ensurecontinued straight driving penetration into work surface.Unique power venting system prevents overdrive andensures consistent fastening into varible substrates,providing 1-1/4’’ penetration into soft or hard concrete.The pin and clip, as well as the slim profile tool designallows for threaded rod, pencil rod and wire to hangstraight down allowing fastening in congested areasUse’s standard PATMI 22 cal straight wall powder loads.

New

Ninja Fastening Tool

Ninja Fastening Tool

.307" dia head, slim groove shank NJ pin w/NJ clip 1000.307" (7.8mm) dia head, smooth shank NJ pin w/NJ clip 1000

.307" (7.8mm) dia head, step shank NJ pin w/NJ clip 1000

.307" (7.8mm) dia head, step shank NJ pin with 1/4"-20 & 3/8"-16 all thread rod hanger clip 500

.307" (7.8mm) dia head, .157" (4mm) dia. shank, 1" slim groove shank length NJ pin

1000

.307" (7.8mm) dia head, smooth shank NJ pin 1000

.307" (7.8mm) dia head, step shank NJ pin 1000

No.

Aluminum Adjustable Mul func on Ceiling Pole – 4' to 8'

Aluminum Adjustable Mul func on Ceiling Pole – 4' to 12'

Aluminum Adjustable Mul func on Ceiling Pole – 6' to 12'

Aluminum Adjustable Mul func on Ceiling Pole – 6' to 18'

Aluminum Adjustable Mul func on Ceiling Pole – 8' to 24'

NJ-100 .22cal. Single shot Ninja ceiling tool for 1" NJ pin

.22cal. Single shot Ninja ceilingNJ-125

Ninja Mul func on Pole

Ninja Angle Clip Pin

.22cal straight wall single

5.6*15

6

100 1000

100

100

1000

1000

10005

4

3 100

IItem No.

patent pending

patent pending

patent pending

patent pending

patent pending

patent pending

Ninja Fastening Tool page 1Ninja Fastening Tool page 2