8/12/2019 Nikon D70 User manual
1/218
8/12/2019 Nikon D70 User manual
2/218
8/12/2019 Nikon D70 User manual
3/218
8/12/2019 Nikon D70 User manual
4/218
8/12/2019 Nikon D70 User manual
5/218
8/12/2019 Nikon D70 User manual
6/218
8/12/2019 Nikon D70 User manual
7/218
8/12/2019 Nikon D70 User manual
8/218
8/12/2019 Nikon D70 User manual
9/218
8/12/2019 Nikon D70 User manual
10/218
8/12/2019 Nikon D70 User manual
11/218
8/12/2019 Nikon D70 User manual
12/218
8/12/2019 Nikon D70 User manual
13/218
8/12/2019 Nikon D70 User manual
14/218
8/12/2019 Nikon D70 User manual
15/218
8/12/2019 Nikon D70 User manual
16/218
8/12/2019 Nikon D70 User manual
17/218
8/12/2019 Nikon D70 User manual
18/218
8/12/2019 Nikon D70 User manual
19/218
8/12/2019 Nikon D70 User manual
20/218
8/12/2019 Nikon D70 User manual
21/218
8/12/2019 Nikon D70 User manual
22/218
8/12/2019 Nikon D70 User manual
23/218
8/12/2019 Nikon D70 User manual
24/218
8/12/2019 Nikon D70 User manual
25/218
8/12/2019 Nikon D70 User manual
26/218
8/12/2019 Nikon D70 User manual
27/218
8/12/2019 Nikon D70 User manual
28/218
8/12/2019 Nikon D70 User manual
29/218
8/12/2019 Nikon D70 User manual
30/218
8/12/2019 Nikon D70 User manual
31/218
8/12/2019 Nikon D70 User manual
32/218
8/12/2019 Nikon D70 User manual
33/218
8/12/2019 Nikon D70 User manual
34/218
8/12/2019 Nikon D70 User manual
35/218
8/12/2019 Nikon D70 User manual
36/218
8/12/2019 Nikon D70 User manual
37/218
8/12/2019 Nikon D70 User manual
38/218
8/12/2019 Nikon D70 User manual
39/218
8/12/2019 Nikon D70 User manual
40/218
8/12/2019 Nikon D70 User manual
41/218
8/12/2019 Nikon D70 User manual
42/218
8/12/2019 Nikon D70 User manual
43/218
8/12/2019 Nikon D70 User manual
44/218
8/12/2019 Nikon D70 User manual
45/218
8/12/2019 Nikon D70 User manual
46/218
8/12/2019 Nikon D70 User manual
47/218
8/12/2019 Nikon D70 User manual
48/218
8/12/2019 Nikon D70 User manual
49/218
8/12/2019 Nikon D70 User manual
50/218
8/12/2019 Nikon D70 User manual
51/218
8/12/2019 Nikon D70 User manual
52/218
8/12/2019 Nikon D70 User manual
53/218
8/12/2019 Nikon D70 User manual
54/218
8/12/2019 Nikon D70 User manual
55/218
8/12/2019 Nikon D70 User manual
56/218
8/12/2019 Nikon D70 User manual
57/218
8/12/2019 Nikon D70 User manual
58/218
8/12/2019 Nikon D70 User manual
59/218
8/12/2019 Nikon D70 User manual
60/218
8/12/2019 Nikon D70 User manual
61/218
8/12/2019 Nikon D70 User manual
62/218
8/12/2019 Nikon D70 User manual
63/218
8/12/2019 Nikon D70 User manual
64/218
8/12/2019 Nikon D70 User manual
65/218
8/12/2019 Nikon D70 User manual
66/218
8/12/2019 Nikon D70 User manual
67/218
8/12/2019 Nikon D70 User manual
68/218
8/12/2019 Nikon D70 User manual
69/218
8/12/2019 Nikon D70 User manual
70/218
8/12/2019 Nikon D70 User manual
71/218
8/12/2019 Nikon D70 User manual
72/218
8/12/2019 Nikon D70 User manual
73/218
8/12/2019 Nikon D70 User manual
74/218
8/12/2019 Nikon D70 User manual
75/218
8/12/2019 Nikon D70 User manual
76/218
8/12/2019 Nikon D70 User manual
77/218
8/12/2019 Nikon D70 User manual
78/218
8/12/2019 Nikon D70 User manual
79/218
8/12/2019 Nikon D70 User manual
80/218
8/12/2019 Nikon D70 User manual
81/21871
T ak i n gP h o t o gr a ph s F o c
u s
3 Recom pose the pho to graph and shoot.
In single-ser vo AF (AF-S), focus will remain locked be tween shots as long asthe shutter-re lease button is kept pressed half way, al lowing sev eral pho to -
graphs in suc cession to be taken at the same focus setting. Focus will alsoremain locked between shots while the AE-L/AF-Lbutton is pressed.
Do not change the distance between the camera and the subject while focuslock is in effect. If the subject moves, focus again at the new distance.
AF-Area ModeSelect Single area or Dynamic area for Custom Setting 3 ( AF-area mode ; 140)when focusing using focus lock.
ModeAF-C is selected automatically when the mode dial is rotated to .
15AE-L/AF-L ( 147)This option controls whether the AE-L/AF-Lbutton locks focus and exposure (the de-fault setting), focus only, or exposure only.
8/12/2019 Nikon D70 User manual
82/21872
T ak i ngP h ot ogr aph s F oc us
The AF-Assist IlluminatorThe built-in AF assist illuminator enables thecamera to focus even when the subject is poorlylit. To use the illuminator, AF-S must be selectedfor Custom Setting 2 ( Autofocus ; 139), anAF-Nikkor lens must be attached, and the centerfocus area must be selected or closest subject priority in effect. If theseconditions are met and the subject is poorly lit, the illuminator will light auto-matically to assist the autofocus operation when the shutter-release button ispressed halfway. The AF-assist illuminator is not available in (Landscape),
(Sports), and (Night landscape) modes.
For the AF-assist illuminator to function correctly, the lens must have a focallength of 24200 mm and the subject must be in range of the illuminator.Lens hoods should be removed. With most lenses, the illuminator has arange of about 0.53 m (18910). With the following lenses, autofocuswith AF-assist illumination is not available at ranges under 1 m (33): AF Micro ED 200 mm f/4 AF-S DX ED 1224 mm f/4
AF-S ED 1735 mm f/2.8 AF ED 1835 mm f/3.54.5 AF-S DX 1870 mm f/3.54.5 AF 2035 mm f/2.8
AF ED 2485 mm f/2.84 AF ED 2485 mm f/3.54.5
AF-S VR ED 24120 mm f/3.55.6 AF 24120 mm f/3.55.6 AF ED 28200 mm f/3.55.6 AF Micro ED 70180 mm f/4.55.6
With the following lenses, AF assist is not available at ranges under 2 m (67): AF-S ED 2870 mm f/2.8 AF-S DX ED 1755 mm f/2.8
AF assist is not available with the following lenses:
AF-S VR ED 70200 mm f/2.8 AF-S ED 80200 mm f/2.8 AF ED 80200 mm f/2.8
AF VR ED 80400 mm f/4.55.6 AF-S VR ED 200400 mm f/4
If an optional SB-800 or SB-600 Speedlight is used, the camera AF-assist il-luminator will turn off and the Speedlight illuminator will be used instead.With other Speedlights, the camera AF assist illuminator will be used.
4AF Assist ( 141)This option can be used to turn the AF-assist illuminator off.
8/12/2019 Nikon D70 User manual
83/21873
T ak i n gP h o t o gr a ph s F o c
u s
Getting Good Results with AutofocusAutofocus does not perform well under the conditions listed below. If thecamera is unable to focus using autofocus, use manual focus ( 74) or usefocus lock ( 70) to focus on another subject at the same distance and thenrecompose the photograph.
Continuous Use of the AF-Assist Illuminator ( 72)
After the AF-assist illuminator has been used for several consecutive shots, it may turnoff briey to protect the lamp. The illuminator can be used again after a short pause.Note that the illuminator may become hot with continuous use.
8/12/2019 Nikon D70 User manual
84/21874
T ak i ngP h ot ogr aph s F oc us
Manual FocusManual focus is available for lenses that do notsup port autofocus (non-AF Nikkor lens es) orwhen autofocus does not produce the desiredresults ( 73). To focus manually, set the focus-mode selector to M and adjust the lens focusingring until the image displayed on the clear matteeld in the viewnder is in focus. Pho to graphscan be taken at any time, even when the imageis not in focus.
The Electronic Range Finder If the lens has a maximum aperture of f/5.6 orfaster, the viewnder fo cus indicator can be usedto con rm whether the subject in the se lected fo-cus area is in focus. After positioning the sub jectin the active focus area, press the shut ter-re leasebut ton half way and rotate the lens fo cusing ring
un til the in-fo cus in dicator (
) is displayed.
A-M Selection/Autofocus with Manual PriorityWhen using a lens that offers A-M selection, select M when focusing manually. Withlenses that support M/A (autofocus with manual priority), focus can be adjusted man- ually with the lens set to M or M/A. See the documentation provided with your lensfor details.
Focal Plane PositionTo determine the distance between your subject and
the camera, measure from the focal plane mark on thecamera body. The distance between the lens mountingange and the focal plane is 46.5 mm (1.83).
8/12/2019 Nikon D70 User manual
85/21875
T ak i n gP h o t o gr a ph s E x p
o s ur e
MeteringIn P, S, A, and M modes, the metering mode determines how the camera setsexposure. The following options are available when a CPU lens is attached(metering is not performed when a non-CPU lens is used).
ExposureControlling How the Camera Sets Exposure
Camera meters circle 2.3 mm (0.09) in diameter (approximately 1% offrame). Circle is centered on current focus area, making it possible tometer off-center subjects (if Closest subjct is selected for AF-area mode,camera will meter center focus area). En sures that sub ject will be cor-rectly exposed, even when back ground is much brighter or darker.
Spot
Camera meters entire frame but assigns greatest weight to area in centerof frame 8 mm (0.31) in diameter, shown by corresponding 8-mm refer-ence circle in viewnder. Classic meter for portraits; recommended whenusing lters with exposure factor (lter factor) over 1 ( 191).
Center-weighted
DescriptionMethod
Metering is performed by 1,005-pixel RGB sensor, which sets exposurebased on variety of information from all areas of frame. This method isparticularly effective where frame is dominated by bright (white or yel-low) or dark (black or dark green) colors, when its results approach whatis seen by human eyes. 3D color matrix metering , which uses range infor-
mation from lens in adjusting exposure, is available only with type G or Dlenses. Color matrix metering , which does not include range information,is available with other CPU lenses. Matrix metering will not producedesired results with autoexposure lock ( 84) or exposure compensation( 86), but is recommended in most other cases.
3D colormatrix/ Colormatrix
11Center Wtd ( 145)This option controls the size of the area assigned the greatest weight in center-weighted metering.
To choose a metering mode, press the but-ton and rotate the main command dial. Metering
mode is displayed in the control panel:
8/12/2019 Nikon D70 User manual
86/21876
T ak i ngP h ot ogr aph s E xpos ur e
Exposure ModeWhen the mode dial is rotated to P, S, A, or M, the user can set shutter speedand aperture as described on the following pages.
CPU LensesWhen using a CPU lens equipped with an aperture ring, lock the aperture ring at theminimum aperture (highest f/-number). At other settings, the shutter release will bedisabled and a blinking will appear in the aperture displays in the top controlpanel and viewnder. Type G lenses are not equipped with an aperture ring.
Non-CPU LensesNon-CPU lenses can only be used in mode M, when aperture can be adjusted manually
using the lens aperture ring. In other modes, the shutter-release will be disabled and ablinking will appear in the control panel and viewnder aperture displays.
Depth-of-Field PreviewTo preview the effects of aperture, press and hold thedepth-of-eld preview button. If a CPU lens is attached,the lens will be stopped down to the aperture valueselected by the cam era (P and S modes) or the val uecho sen by the user ( A and M modes), al lowing depth ofeld to be previewed in the viewnder (depth-of-eldpreview is not available with non-CPU lenses).
5ISO Auto ( 142)When On is selected for Custom Setting 5 ( ISO auto ), the camera automatically variessensitivity in the range 2001600 (ISO equivalent) to help ensure optimum ex po sureand ash level. In P and A modes, the camera adjusts sensitivity when the shutterspeed needed to obtain optimum exposure would be faster than 1 / 8000 s or slower thana specied value (shutter speed may drop below the specied value if optimal exposurecan not be achieved at ISO 1600 equivalent). Otherwise the camera adjusts sensitiv-
ity when the limits of the camera exposure me ter ing system are exceeded (mode S)or when optimum exposure can not be achieved at the shutter-speed and apertureselected by the user (mode M).
When sen sitivity is altered from the value se lected bythe user, ISO AUTO ashes in the control panel andviewnder. In the camera photo information display forpictures taken at altered sensitivities, the ISO value willbe displayed in red. Note that noise is more likely to ap-
pear in pho to graphs taken at higher sen sitivities.
8/12/2019 Nikon D70 User manual
87/218
8/12/2019 Nikon D70 User manual
88/21878
T ak i ngP h ot ogr aph s E xpos ur e
If the ash-ready indicator ( ) blinks in the viewnder, the ash can be used for ad-ditional lighting. The ash-ready indicator will not be displayed if Off is selected forCustom Setting 20 ( Flash sign ).
Exposure ProgramThe exposure program for mode P is shown in the fol lowing graph:
The maximum and minimum values for EV vary with sen sitivity (ISO equivalency); theabove graph assumes a sen sitivity of ISO 200 equivalent. When matrix metering isused, values over 17 1 / 3 EV are reduced to 17 1 / 3 EV.
AF 50 mm f/1.4DAF ED 180 mm f/2.8DAF-S ED 300 mm f/4D
A p e r t ur e
Shutter speed
Subject too dark. Raise sensitivity ( 46).
DescriptionIndicatorSubject too bright. Use optional Neutral Density (ND) lter or lowersensitivity ( 46).
Exposure WarningIf the limits of the exposure metering system are exceeded, one of the following indica-tors will be dis played in the control panel and viewnder:
8/12/2019 Nikon D70 User manual
89/21879
T ak i n gP h o t o gr a ph s E x p
o s ur e
S: Shutter-Priority AutoIn mode S, you choose the shutter speed while the camera au to mat ically se-lects the aperture that will produce the optimal exposure. Shutter speed can
be set to values between 30 s and 1 / 8,000 s. Use slow shutter speeds to suggestmotion by blurring moving objects, high shutter speeds to freeze motion.Mode S is only available with CPU lenses.
To take pho to graphs in shutter-pri ority auto:
1 Rotate the mode dial to S.
2 Rotate the main com mand dial to choose thede sired shut ter speed.
3 Frame a photograph, focus, and shoot.
If the ash-ready indicator ( ) blinks in the viewnder, the ash can be used for ad-ditional lighting. The ash-ready indicator will not be displayed if Off is selected forCustom Setting 20 ( Flash sign ).
Subject too dark. Choose slower shutter speed or higher sensitivity (46).
DescriptionIndicator
Subject too bright. Choose faster shutter speed or lower sensitivity (46), or use optional Neutral Density (ND) lter.
Exposure WarningIf the limits of the exposure metering system are exceeded, one of the following indica-tors will be dis played in the control panel and viewnder:
8/12/2019 Nikon D70 User manual
90/21880
T ak i ngP h ot ogr aph s E xpos ur e
Changing from Mode M to Mode SIf you select a shutter speed of or (long time exposure) in mode M andthen select mode S without changing the shutter speed, the shutter-speed display willash and the shutter can not be released. Rotate the main command dial to select adifferent shutter speed before shooting.
Shutter Speed and Camera ShakeTo prevent blurring caused by camera shake, the shutter speed should be faster thanthe inverse of the focal length of the lens, in seconds (for example, if a lens has a fo-cal length of 300 mm, shutter speed should be faster than 1 / 300 s). Use of a tripod isrecom mend ed when shooting at slower shutter speeds. To prevent blur, try increasingsensitivity ( 46), using the built-in Speedlight ( 94), or attaching a VR lens.
8/12/2019 Nikon D70 User manual
91/218
8/12/2019 Nikon D70 User manual
92/21882
T ak i ngP h ot ogr aph s E xpos ur e
M: ManualIn mode M, the user controls both shutter speed and aperture. Shut ter speedcan be set to values between 30 s and 1 / 8,000 s, or the shutter can be held
open indenitely for a long time-exposure ( ). Aperture can be set tovalues between the minimum and maximum values for the lens. Using theelectron ic analog exposure display in the viewnder, you can adjust exposureaccord ing to shooting con ditions and the task at hand.
To take pho to graphs in manual exposure mode:
1 Rotate the mode dial to M.
2 Rotate the main com mand dial to choose a shut ter speed, and the sub-com mand dial to set aperture. Check exposure in the electronic an alogexpo sure display (see opposite), and con tinue to adjust shut ter speed andap erture until the de sired ex po sure is achieved.
3 Frame a photograph, focus, and shoot.
8/12/2019 Nikon D70 User manual
93/21883
T ak i n gP h o t o gr a ph s E x p
o s ur e
The Flash-Ready IndicatorIf the ash-ready indicator ( ) blinks in the viewnder, the ash can be used for ad-ditional lighting. The ash-ready indicator will not be displayed if Off is selected forCustom Setting 20 ( Flash sign ).
Long Time-ExposuresAt a shutter speed of , the shutter will remain open while the camera shutter-release but ton is held down. In delayed remote and quick-response remote modes,
is displayed instead of ; the shutter opens when the shutter-release buttonon the optional ML-L3 remote control is pressed (2 s after the button is pressed in de-layed remote mode) and remains open until the remote-control shutter-release buttonis pressed a second time (maximum 30 minutes; 107). Nikon recommends using afully-charged EN-EL3 battery or an optional EH-5 AC adapter to prevent loss of power
while the shutter is open. Note that if the shutter is open for more than approximately1 s at any setting, noise in the form of randomly-spaced, brightly-colored pixels mayap pear in the nal pho to graph.
Non-CPU LensesIf a non-CPU lens is attached in mode M, will appear in the aperture displays inthe control panel and viewnder. Aperture must be adjusted manually using the lensaperture ring, and depth-of-eld preview is not available. The camera exposure metercan not be used, and exposure will not be displayed in the electronic analog exposure
display. Electronic Analog Exposure Display
The electronic analog exposure display in the viewnder shows whether the photo-graph would be un der- or over-exposed at current settings. Depending on the optionchosen for Custom Setting 9 ( EV step ), the amount of un der- or over-ex po sure isshown in increments of 1 / 3 EV or EV. If the limits of the ex po sure metering systemare ex ceed ed, the display will ash.
EV step set to 1/3 step EV step set to 1/2 step
Underexposed by 1 / 3 EV Underexposed by EV
Optimal exposure Optimal exposure
Overexposed by more than 2 EV Overexposed by more than 3 EV
8/12/2019 Nikon D70 User manual
94/21884
T ak i ngP h ot ogr aph s E xpos ur e
Autoexposure LockWhen center-weighted metering is used, an area in the center of the frameis assigned the greatest weight when determining exposure. Similarly, whenspot metering is used, exposure is based upon lighting conditions in the se-lected focus area. If the subject is not in the metered area when the pictureis taken, exposure will be based on lighting conditions in the back ground,and the main sub ject may be under- or over-exposed. To prevent this, useautoexposure lock:
1 Rotate the mode dial to P, S, or A and selectcenter-weight ed or spot metering (exposurelock has no effect in mode M, while DigitalVari-Program modes are not recommended ascenter-weighted and spot metering can notbe selected in these modes).
While expo sure lock is in effect, an EL indicator will ap pear in the view-nder.
2 Position the sub ject in the selected focus area and press the shutter-re-lease button halfway (when using center-weighted metering, positionthe subject in the center focus area). With the shut ter-release buttonpressed halfway and the subject still po sitioned in the fo cus area, pressthe AE-L/AF-Lbutton to lock exposure. Conrm that the in-focus in di-cator ( ) appears in the viewnder.
8/12/2019 Nikon D70 User manual
95/21885
T ak i n gP h o t o gr a ph s E x p
o s ur e
3 Keeping the AE-L/AF-L but ton pressed, re com pose the pho to graph andshoot.
Metered AreaIn spot metering, exposure will be locked at the value metered in a 2.3-mm (0.09) cir-cle centered on the selected focus area. In center-weighted metering, exposure will belocked at the value metered in an 8-mm (0.31) circle at the center of the viewnder.
Adjusting Shutter Speed and ApertureWhile exposure lock is in effect, the following settings can be changed without alteringthe metered value for exposure:
The new values can be conrmed in the viewnder and control panel. Note that themetering method can not be changed while exposure lock is in effect.
15AE-L/AF-L ( 147)Depending on the option selected, the AE-L/AF-L button locks both focus and exposure(the default setting), only focus, or only exposure. Options are available for keepingexposure locked until the AE-L/AF-L button is pressed a second time, the shutter isreleased, or exposure meters turn off.
16AE Lock ( 148)If +Release bttn is selected for AE Lock, exposure will lock when the shutter-releasebutton is pressed halfway.
Shutter speedS
SettingsMode
Shutter speed and aperture (exible program; 77)P
ApertureA
8/12/2019 Nikon D70 User manual
96/21886
T ak i ngP h ot ogr aph s E xpos ur e
Exposure CompensationTo obtain the desired results with certain subject compositions, it may benec essary to use ex po sure compensation to alter exposure from the val uesug gest ed by the cam era. As a rule of thumb, positive compensation maybe needed when the main sub ject is dark er than the background, negativevalues when the main sub ject is bright er than the background.
Exposure compensation is available in modes P, S, and A (in mode M, only theexposure information in the electronic analog exposure display is affected;shutter speed and aperture do not change).
1 Pressing the button, rotate the maincom mand dial and conrm ex po sure com- pen sation in the control panel or the elec-tronic analog exposure display (the 0 in theelectronic analog exposure display will ash).Expo sure com pen sation can be set to val uesbe tween 5 EV (un der expo sure) and +5 EV(overexpo sure) in in crements of 1 / 3 EV.
The cur rent val ue for ex po sure com pen sationcan be con rmed by press ing the but ton.The current value is shown in the control panelwith a icon; in the viewnder, positive val-ues are shown by a icon, negative values bya icon.
2 Frame the pho to graph, fo cus, and shoot.
Normal ex po sure can be restored by set ting ex po sure compensation to 0 orper form ing a two button reset ( 111). Ex po sure com pen sation is not resetwhen the camera is turned off.
9EV Step ( 144)Use this option to set the increments for exposure com pen sation to EV.
10Exp Comp. ( 145)If desired, exposure compensation can be set without pressing the button.
+2.0 EV
0.3 EV
0 EV ( button pressed)
8/12/2019 Nikon D70 User manual
97/218
8/12/2019 Nikon D70 User manual
98/21888
T ak i ngP h ot ogr aph s E xpos ur e
Exposure and Flash Bracketing
1 Select the type of brack et ing to be per formedusing Cus tom Set ting 12 ( BKT set ; 146).Choose AE & ash to vary both ex po sure andash level (the de fault setting), AE only tovary only exposure, or Flash only to vary onlyash level. ? WB bracketin g
AE & flash
AE only
Flash onl y
12 BKT set
OK
2 Pressing the button, rotate the main com- mand dial until is displayed in the controlpanel and the icons in the control panel
and viewnder start to blink.
3 Press the button and rotate the sub-com- mand dial to choose a bracketing program (9091).
8/12/2019 Nikon D70 User manual
99/21889
T ak i n gP h o t o gr a ph s E x p
o s ur e
4 Com pose a photograph, focus, and shoot.The cam era will vary ex po sure and/or ashlevel shot-by-shot according to the brack et ing
pro gram se lected. Mod ications to ex po sureand ash level are add ed to those made withexpo sure com pen sation ( 86) and ash ex-posure compensation ( 102).
While bracketing is in ef fect, the icons inthe control panel and viewnder will ash. Aseg ment will dis ap pear from the bracketingprogress in dicator ( , , or
) after each shot. The middle segment( ) disappears when the unmodied shot istaken, the segment when a shot withnegative compensation is taken, and thesegment when a shot with positive compensa-tion is taken. Bracketing begins again whenall shots in the sequence have been taken.
To cancel bracketing, press the button and rotate the main com manddial until is no longer displayed in the control panel. The programlast in effect will be restored the next time brack et ing is ac tivated. Brack- et ing can also be cancelled by selecting WB bracketing for Custom Set-ting 12 or by per form ing a two-button reset ( 111), although in thiscase the bracketing program will not be restored the next time brack et ingis activated.
Shooting ModeIn single frame, self-timer, and remote control modes, one shot will be taken each time
the shutter-release button is pressed. In continuous mode, shooting will pause af terthe number of shots specied in the bracketing pro gram have been taken. Shootingwill resume the next time the shutter-release button is pressed.
8/12/2019 Nikon D70 User manual
100/218
8/12/2019 Nikon D70 User manual
101/218
8/12/2019 Nikon D70 User manual
102/21892
T ak i ngP h ot ogr aph s E xpos ur e
3 Press the button and rotate the sub-com- mand dial to choose a bracketing program (93). Each increment is equivalent to about 10mired ( 51); if the number of images in thebracketing program exceeds the number ofexposures remaining, the bracketing progressindicator ( , , or ) will
blink.
White Balance Bracketing
1 Choose WB bracketing for Cus tom Set ting12 (BKT set ; 146). Note that white bal-ance bracketing will not be performed if NEF(Raw) or NEF+JPEG Basic is selected for im-age quality.
? WB bracketin g
12 BKT set
OK
AE & flash
AE only
Flash onl y
2 Pressing the button, rotate the main com- mand dial until is displayed in the controlpanel. The icon in the control panel
and the arrows ( and ) at the ends of theelectronic analog exposure display will start toblink.
Shooting ModeIn all modes (including continuous mode), the shutter is released only once each timethe shutter-release button is pressed. Each shot is processed to create the number ofcopies specied in the bracketing program.
Turning the Camera OffIf the power is turned off during recording, the camera will not power down until allshots in the bracketing sequence have been recorded.
8/12/2019 Nikon D70 User manual
103/218
8/12/2019 Nikon D70 User manual
104/21894
T ak i ngP h ot ogr aph s F l as h P h ot ogr aph y
The D70 is equipped with a Guide Number 15/49 Speedlight (ISO 200, m/ ft; Guide Number at ISO 100 is 11/36). When a CPU lens is attached, thebuilt-in Speedlight emits monitor preashes that are analyzed using through-
the-lens (TTL) technology (i-TTL ash control). The built-in Speedlight can beused not only when natural lighting is inadequate, but also to ll in shadowsand backlit subjects or to add a catch light to the subjects eyes.
i-TTL Flash Control The following types of ash control are available with CPU lenses:
Flash PhotographyUsing the Built-in Speedlight
DescriptionFlash control
i-TTL Balanced Fill-Flash for Digital SLR is selected automatically in allmodes except mode M or when spot metering is selected in modesP, S, and A. Speedlight emits series of nearly invisible preashes(monitor preashes) immediately before main ash. Preashesreected from objects in all areas of frame are picked up by 1,005-pixel RGB sensor and are analyzed in combination with informationfrom matrix metering system to adjust ash output for naturalbalance between main subject and ambient background lighting.If type G or D lens is used, distance information is included whencalculating ash output.
i-TTL BalancedFill-Flash forDigital SLR
Standard i-TTL Flash for Digital SLR is activated automatically inmode M and when spot metering is selected in modes P, S, and A.Flash output adjusted to ensure main subject is correctly exposed;brightness of background is not taken into account. Recommendedfor shots in which main subject is emphasized at expense of back-ground details, or when exposure compensation is used.
Standardi-TTL Flash for
Digital SLR
When a non-CPU lens is attached, the built-in Speedlight can only be usedwhen Manual is selected for Custom Setting 19 ( Flash mode ; 150). IfTTLselected, the shutter release will be disabled when the built-in Speedlightis raised. The ash-ready indicator ( ) in the viewnder and the icon andborders of the ash sync mode indicator in the control panel will blink.
19Flash Mode ( 150)Flash mode can be selected from TTL, Manual , and Commander mode . In Manual
mode, the built-in Speedlight has a Guide Number (m/ft) of 17/56 (ISO 200) or 12/39(ISO 100). Commander mode can be used for wireless off-camera ash photographywith SB-800 or SB-600 Speedlights.
8/12/2019 Nikon D70 User manual
105/21895
T ak i n gP h o t o gr a ph s F l a s h P h o t o gr a ph y
Flash Sync ModesThe following ash sync settings are available in P, S, A, and M modes:
DescriptionFlash sync modeThis mode is recommended for most situations. In P andA modes, shutter speed will au to mat ically be set to valuesbetween 1 / 60 and 1 / 500 s.
Red-eye reduction lamp lights for approximately 1 s beforemain ash, causing pupils in subjects eyes to contract andreducing red-eye effect sometimes caused by ash. Ow-ing to 1 s shutter-release delay, red-eye reduction is not
recommended with moving subjects or in other situationsin which quick shutter response is required. Do not movecamera while red-eye reduction lamp is lit.
In S and M modes, ash res just before shutter closes, creat-ing effect of stream of light following moving subjects. In Pand A modes, slow-rear curtain sync is used to capture bothsubject and background. Use of tripod is recommended toprevent blurring caused by camera shake.
Rear-curtain sync
Slow rear-curtain sync
Combines red-eye reduction with slow sync. Available onlyin P and A modes. Use of tripod is recommended to preventblurring caused by camera shake.
Slow sync with red-eye reduction
Flash is combined with shutter speeds as slow as 30 s tocap ture both subject and background at night or under dimlight. Available only in P and A modes. Use of tripod is rec-ommended to prevent blur ring caused by camera shake.Slow sync
Red-eye reduction
Front-curtain sync
Flash AngleThe ash angle of the built-in Speedlight can cover the eld of view of a 20 mm lens. Itmay not be able to light the entire subject with some lenses or apertures ( 101).
ISO AutoWhen On is selected for Custom Setting 5 ( ISO auto ; 142), sensitivity will automati-cally be adjusted as required for optimal ash output. If a high sensitivity is required,
this may result in the background being overexposed when the ash is used at slowshutter speeds (slow sync), in bright daylight (daylight sync), or when the backgroundis brightly lit.
8/12/2019 Nikon D70 User manual
106/21896
T ak i ngP h ot ogr aph s F l as h P h ot ogr aph y
The following ash sync settings are available in , , and modes:
DescriptionFlash sync mode
Combines red-eye reduction ( 95) with auto front-curtain sync.Auto with red-eye reduction
Flash does not re even when lighting is poor or built-in Speedlightis raised. Flash does not pop up automatically when shutter-re-lease button is pressed halfway.Off
If lighting is poor or subject is back-lit, ash pops up when shut-ter-release button is pressed halfway and res automatically whenshutter is released. Shutter speed is restricted to values between1 / 60 and 1 / 500 s (1 / 125 and 1 / 500 s in mode). Auto front-curtain sync isselected automatically when mode dial is rotated to , , or .
Auto front-curtain sync
The following ash sync settings are available in mode:
DescriptionFlash sync mode
Combines red-eye reduction ( 95) with auto slow sync. Useof tripod is recommended to prevent blur ring caused by camera
shake.
Auto slow sync
with red-eyereduction
Flash does not re even when lighting is poor or built-in Speedlightis raised. Flash does not pop up automatically when shutter-re-lease button is pressed halfway.Off
If lighting is poor or subject is back-lit, ash pops up when shutter-release button is pressed halfway. Flash is combined with shutterspeeds as slow as 1 s to cap ture both subject and background atnight or under dim light. Use of tripod is recommended to preventblurring caused by camera shake. Auto slow sync is selected auto-matically when mode dial is rotated to .
Auto slow sync
8/12/2019 Nikon D70 User manual
107/21897
T ak i n gP h o t o gr a ph s F l a s h P h o t o gr a ph y
Using the Built-in SpeedlightFollow these steps when using the built-in Speedlight with a CPU lens.
1 Rotate the mode dial to the desired setting( 10). If , , , or mode is selected,proceed to Step 4 ( 98). i-TTL Balanced Fill-Flash for Digital SLR will be selected, and thebuilt-in Speedlight will pop-up automaticallywhen required.
2 Choose a metering method. In P, S, and A modes, the metering method determines thetype of ash control used ( 94); select matrixor center-weighted metering to activate i-TTLBalanced Fill-Flash for Digital SLR. Standard i-TTL Flash for Digital SLR is activated automati-cally in mode M and when spot metering isselected in modes P, S, and A.
3 Press the button. The built-in Speedlight
will pop up and begin charging. When theSpeedlight is fully charged, the ash-readyindicator will light.
Auto Flash ( , , , and Modes)The built-in Speedlight can not be raised and red manually in , , , andmodes. Once raised, the built-in Speedlight will only re when required for additionallighting.
Red-Eye ReductionSome lenses may block the red-eye reduction lamp, preventing the subject from seeingthe lamp and interfering with red-eye reduction.
When the Speedlight Is Not in UseTo save battery power when the Speedlight is not in use, return it to the closed positionby pressing it lightly downward until the latch clicks into place.
8/12/2019 Nikon D70 User manual
108/21898
T ak i ngP h ot ogr aph s F l as h P h ot ogr aph y
4 Press the button and rotate the main command dial until the desiredash sync icon is displayed in the control panel.
Studio Flash SystemsRear-curtain sync can not be used with studio ash systems, as the correct syn chro -nization can not be obtained.
The options available depend on the mode selected with the mode dial:
Auto frontcurtain sync
Auto+red-eyereduction
Off
Auto slowsync
Auto slowsync+red-eye
reduction
Off
, ,
1 Available only in P and A modes. If mode dial is rotated to S or M after thisoption has been selected in P or A mode, ash sync mode will be set to(red-eye reduction).
2 Available only in P and A modes. If mode dial is rotated to S or M after thisoption has been selected in P or A mode, ash sync mode will be set to(front-cur tain sync).
3In P and A modes, ash-sync mode will be set to (slow rear-cur tain sync)when the button is released.
P, S, A, M
Rear curtainsync3
Slowsync2
Front curtain
sync
Red-eye
reduction
Slow sync+red-
eye reduction 1
8/12/2019 Nikon D70 User manual
109/21899
T ak i n gP h o t o gr a ph s F l a s h P h o t o gr a ph y
5 Press the shutter-release button halfway and check exposure (shutterspeed and aperture). In , , , and modes, the built-in Speedlightwill pop up automatically if required for additional lighting and the ash
will begin charging. The shutter speeds and apertures available when thebuilt-in Speedlight is raised are listed below.
Mode Shutter speed Aperture
Set automaticallyby camera
Value selected by
user 3
P Set automatically by camera ( 1 / 500 1 / 60 s)1 72
S Value selected by user ( 1 / 500 30 s) 2 79
A Set automatically by camera ( 1 / 500 1 / 60 s)1 81
M Value selected by user (1 /
500 30 s)2
82
Set automatically by camera ( 1 / 500 1 / 125 s)
Set automatically by camera ( 1 / 500 1 / 60 s) ,
Set automatically by camera ( 1 / 500 1 s)
Set automaticallyby camera
1 Limit for slow shutter speed is set using Custom Setting 21 ( Shutter spd ;152). Regardless of option selected, camera may set shutter to speeds as slowas 30 s at ash sync settings of slow sync, slow rear-curtain sync, and slow sync
with red-eye reduction.2 Speeds faster than 1 / 500 s will be reduced to 1 / 500 s when built-in Speedlight israised or optional Speedlight is attached and turned on.
3 Flash range varies with aperture. Consult table of ash of ash ranges ( 100)when setting aperture in A and M modes.
6 Check that the ash-ready indicator appearsin the viewnder. If the ash-ready indicatoris not displayed when the built-in Speedlight is
used, the shutter release will be disabled.
7 Compose the photograph, making sure that the subject is within rangeof the ash ( 100), then focus and shoot. If the ash-ready light blinksfor about three seconds after the photograph is taken, the ash has redat full output and the photograph may be underexposed. Check theresults in the monitor. If the photograph is underexposed, adjust settingsand try again.
8/12/2019 Nikon D70 User manual
110/218
8/12/2019 Nikon D70 User manual
111/218101
T ak i n gP h o t o gr a ph s F l a s h P h o t o gr a ph y
Compatible LensesThe built-in Speedlight can be used with any CPU lens with a focal length of 20300 mm. Note that the built-in Speedlight may be unable to light the entire subject ifthe following lenses are not used at or above the minimum ranges given below:
The minimum distance at which the built-in Speedlight can be used is 0.6 m (2). The
built-in Speedlight can not be used in the macro range of macro zoom lenses.The built-in Speedlight can also be used with Ai-S, Ai, and Ai-modied non-CPU lenseswith a focal length of 20200 mm. Restrictions apply to the following lenses: Ai-S 2550 mm f/4, Ai 2550 mm f/4, and Ai-S 3570 mm f/3.5: can be used at
35 mm at a range of 1.0 m /33 or above Ai 50300 mm f/4.5, Ai-modied 50300 mm f/4.5, Ai-S ED 50300 mm f/4.5, and
Ai-modied 85250 mm f/4: use at 135 mm and above Ai ED 50300 mm f/4.5: use at 105 mm and above Ai-S ED and Ai-ED 200 mm f/2: can not be used
Lens Zoom position Minimum range
20 mmAF-S DX ED 1224 mm f/4G
2.5 m / 82
24 mm 1.0 m / 33
20 mm, 24 mmAF-S ED 1735 mm f/2.8D
2.5 m / 82
28 mm 1.0 m / 33
20 mm, 24 mm
AF-S DX IF ED 1755 mm f/2.8G
2.5 m / 82
28 mm 1.5 m / 411
35 mm 0.7 m / 24
20 mmAF ED 1835 mm f/3.54.5D
2.0 m / 67
24 mm 0.7 m / 24
20 mmAF 2035 mm f/2.8D
1.5 m / 411
24 mm 1.0 m / 33
24 mmAF-S VR ED 24120 mm f/3.55.6G 0.8 m / 27 28 mm
AF-S ED 2870 mm f/2.8D3.0 m / 910
35 mm 1.0 m / 33
200 mmAF-S VR 200400 mm f/4G
4.0 m / 131
250 mm 2.5 m / 82
8/12/2019 Nikon D70 User manual
112/218102
T ak i ngP h ot ogr aph s F l as h P h ot ogr aph y
Flash Exposure CompensationIn P, S, A, and M modes, ash exposure compensation can be used to increaseor reduce ash output from the level chosen by the cameras ash control
system (ash exposure compensation is not available in Digital Vari-Programmodes). Flash output can be increased to make the main subject appearbrighter, or reduced to prevent unwanted highlights or reections. As a ruleof thumb, positive compensation may be needed when the main subject isdarker than the background, negative compensation when the main subjectis brighter than the background.
1 Rotate the mode dial to P, S, A, or M and choose a ash sync mode as
described in Steps 14 of Using the Built-in Speedlight ( 9798).
2 Pressing the button, rotate the sub-com-mand dial and conrm ash exposure com-pensation in the control panel or viewnder.Flash exposure compensation can be set tovalues between 3 EV (darker) and +1 EV(brighter) in increments of 1 / 3 EV.
At values other than 0, a icon will bedisplayed in the control panel and viewnderafter you release the button. The currentvalue for ash exposure compensation can beconrmed by pressing the button.
3 Take a picture as instructed in Steps 57 of Using the Built-in Speed-light ( 99).Normal ash output can be restored by setting ash exposure compensationto 0.0 or performing a two button reset ( 111). Flash exposure compen-sation is not reset when the camera is turned off.
Using Flash Exposure Compensation with Optional SpeedlightsFlash exposure compensation is also available with optional SB-800 and SB-600 Speed-lights.
9EV Step ( 144)This option can be used to set the increments for ash compensation to EV.
8/12/2019 Nikon D70 User manual
113/218103
T ak i n gP h o t o gr a ph s F l a s h P h o t o gr a ph y
2 Rotate the mode dial to the desired setting and choose a ash sync modeas described in Steps 14 of Using the Built-in Speedlight ( 9798).3 Position the subject in the center of the frameand press the shutter-release button halfway to
focus.
FV LockThis feature is used to lock ash output, allowing photographs to be re-composed without changing the ash level. This ensures that ash output
is appropriate to the subject even when the subject is not positioned in thecenter of the frame. Flash output is adjusted automatically for any changesin sensitivity (ISO equivalency) or aperture. To use FV lock:
1 Select FV Lock for Custom Setting 15 ( AE-L / AF-L; 147).
?
15 AE-L/AF-LAE Lock onlyAF Lock onlyAE Lock holdAF-ONFV Lock OK
4 After conrming that the ash-ready indicatoris displayed in the viewnder, press the AE-L /AF-L button. The built-in Speedlight will emit amonitor preash to determine the appropriateash level. Flash output will be locked at thislevel and an EL icon will be displayed in theviewnder.
8/12/2019 Nikon D70 User manual
114/218
8/12/2019 Nikon D70 User manual
115/218105
T ak i n gP h o t o gr a ph s
S el f -T i m
er M
o d e
The self-timer can be used to reduce camera shake or for self-portraits. Touse the self-timer:
1 Mount the camera on a tripod (recommended) or place the camera on astable, level sur face.
2 Press the button and ro tate main com-mand dial until (self-tim er mode) isdisplayed in the control panel.
Self-Timer ModeDelaying Shutter Release
3 Frame the photograph and fo cus. If autofo-cus is in effect, be sure not to block the lenswhen activating the self-timer. In single-servoautofocus ( 139), pho to graphs can only betak en if the in-focus ( ) indicator ap pears inthe viewnder.
Cover the Viewnder To ensure correct ex po sure in modes other than M, cover the viewndereyepiece with your hand or with the supplied DK-5 eyepiece cap beforepressing the shutter-release button. This will pre vent light entering viathe viewnder from in ter fering with the autoexposure operation. TheDK-5 can be attached by removing the viewnder eyepiece cup and slid-
ing the DK-5 down to cover the viewnder eyepiece.
8/12/2019 Nikon D70 User manual
116/218106
T ak i ngP h ot ogr aph s S el f -T i mer Mod e
4 Press the shutter-release button all the waydown to start the self-timer. The self-tim erlamp (AF-assist lamp) will start to blink and a
beep will begin to sound. Two seconds beforethe photograph is taken, the self-timer lampwill stop blinking and the beeping will become more rapid. After thephotograph is taken, the shooting mode in effect before the self-timerwas selected will be restored.
The Built-in Speedlight In P, S, A, and M modes, the self-timer will be cancelled if the built-inSpeedlight is raised before the picture is taken. To start the timer afterraising the Speedlight, wait until the ash-ready indicator is displayed inthe viewnder and then press the shutter-release button.
To cancel the self-timer and restore the shooting mode in effect before self-timer mode was selected, turn the camera off or rotate the mode dial toanother setting.
In self-timer mode, a shutter speed of is equivalent to approximately 1 / 5 s.
1Beep ( 138)This option controls the beep that sounds during the self-timer count-down.
24Self-timer ( 153)Self-timer delay can be set to 2 s, 5 s, 10 s (the default setting), or 20 s.
8/12/2019 Nikon D70 User manual
117/218107
T ak i n gP h o t o gr a ph s
U s i n g aR em
o t e C on t r ol
The optional ML-L3 remote control can be used for self-portraits or to reduceblur caused by camera shake.
Before Using the Remote Control Before using the remote control for the rst time, remove the clear plasticbattery insulator sheet.
Using a Remote ControlRemote-Control Photography
DescriptionShooting mode
Ensures quick shutter response; can be used to reduce blur-ring caused by camera shake.Quick-response remote
Gives operator time to pose when taking self-portrait usingremote control.Delayed remote
Long Time-ExposuresWhen the remote control is used in mode M, can be selected for shutter speed. Atthis setting, the shutter opens when the shutter-release button on the optional ML-L3 remote control is pressed (2 s after the button is pressed in delayed remote mode)and remains open until the remote-control shutter-release button is pressed a secondtime (maximum 30 minutes; 83). Nikon recommends using a fully-charged EN-EL3battery or an optional EH-5 AC adapter to prevent loss of power while the shutter isopen. Note that if the shutter is open for more than approximately 1 s at any setting,noise in the form of randomly-spaced, brightly-colored pixels may ap pear in thenal pho to graph.
Using the Built- in SpeedlightIn situations in which the ash is required, the camera will only respond to the shutter-
release button on the ML-L3 once the ash has charged. In , , , and modes,the ash will begin charging when delayed remote or quick-response remote mode isselected; once the ash has charged, the built-in Speedlight will pop up automaticallyif required when the shutter-release button on the ML-L3 is pressed. If red-eye reduc-tion, slow sync with red-eye reduction, auto with red-eye reduction, or auto slow syncwith red-eye reduction is selected, the self-timer lamp will light for about one secondbefore the shutter is released. In delayed remote mode, the self-timer lamp will blinkfor two seconds and then light for one second before the shutter is released.
In P, S, A, and M modes, raising the built-in Speedlight during the two-second count-down in delayed remote mode will cancel the two-second timer. Wait for the ash tocharge and press the shutter-release button on the ML-L3 to restart the timer.
8/12/2019 Nikon D70 User manual
118/218108
T ak i ngP h ot ogr aph s Us i ngaR emot eC ont r ol
3 Frame the photograph. In autofocus ( AF)mode, the camera shutter-release button canbe used to check focus, although only theshutter release-button on the remote controlcan be used to release the shutter.
Cover the Viewnder To ensure correct ex po sure in modes other than M, cover the viewndereyepiece with your hand or with the supplied DK-5 eyepiece cap beforepressing the shutter-release button. This will pre vent light entering viathe viewnder from in ter fering with the autoexposure operation. TheDK-5 can be attached by removing the viewnder eyepiece cup and slid-ing the DK-5 down to cover the viewnder eyepiece.
To use the remote control:
1 Mount the camera on a tripod (recommended) or place the camera on astable, level sur face.2 Press the button and ro tate main com-mand dial until (delayed remote) or (quick
response remote) is displayed in the controlpanel.
1Beep ( 138)This option controls the beep that sounds during the two-second count-down in de-layed remote mode or when the shutter is released in quick-response remote mode.
25Remote ( 154)The length of time before the camera automatically cancels delayed remote or quick-response remote mode can be chosen from one, ve, ten, or fteen minutes.
8/12/2019 Nikon D70 User manual
119/218109
T ak i n gP h o t o gr a ph s
U s i n g aR em
o t e C on t r ol
4 Aim the transmitter on the ML-L3 at the in-frared receiver on the camera and press theshutter-release button on the ML-L3 (when
using the remote outdoors, make sure thatthe subject is not backlit and that the line ofsite between the transmitter and the infraredreceiver is not blocked by the lens or other ob-stacles). How the camera focuses and shootsdepends on the option selected for CustomSetting 2 ( Autofocus ; 139).
The camera will not adjust focus in manual focus mode or if autofocushas been set using the shutter-release button on the camera.
To return to single-frame or continuous shooting mode, turn the cameraoff or rotate the mode dial to another setting. The shooting mode in effectbefore remote control mode was selected will also be restored if no opera-tions are performed for the time selected for Custom Setting 25 ( Remote ;154). The default setting is one minute.
AF-S (Single-servo AF) AF-C (Continuous-servo AF)
Shutter is released immediately
after camera focuses. Self-timerlamp will ash when shootingis complete. If unable to focus,camera will return to standbywithout releasing shutter.
Quick-responseremote
Camera releases shutter immedi-ately without focusing. Self-timerlamp will ash when shooting iscomplete.
Once camera has focused, self-timer lamp will light for 2 s beforeshutter is released. If unable to fo-cus, camera will return to standbywithout releasing shutter.
Delayedremote
Self-timer lamp lights for 2 s be-fore shutter is released. Cameradoes not focus.
Custom Setting 2Shootingmode
Approx. 5 m (16)
Infrared receiver
8/12/2019 Nikon D70 User manual
120/218110
T ak i ngP h ot ogr aph s Us i ngaR emot eC ont r ol
Replacing the Battery The ML-L3 remote control is powered by a three-volt CR2025 lithium battery.To replace the battery:
1 After sliding the latch in the direction shownin to unlatch the battery holder, remove theholder as shown in .
2 Remove the battery from the battery holder.
3 Insert a fresh battery with the face marked+ on top.
4 Slide the battery holder into the remote untilthe latch clicks into place.
Keep out of Reach of ChildrenCare should be taken to prevent infants from putting the battery or other small parts intheir mouths. Should a child swallow the battery, consult a physician immediately.
8/12/2019 Nikon D70 User manual
121/218
8/12/2019 Nikon D70 User manual
122/218
8/12/2019 Nikon D70 User manual
123/218113
This section details the operations that can beper formed during playback, including thumbnailplayback, playback zoom, and photo informationdisplay.
More AboutPlayback Playback Options
8/12/2019 Nikon D70 User manual
124/218114
Mor eAb out P l ayb ac k
Using the Multi SelectorThe multi selector can be used at any time when the monitor is on. The focus selectorlock switch only takes effect when the monitor is off.
Rotate Tall ( 126)Tall (portrait-orientation) images are not displayed in tall orientation when Off isselected for the Rotate tall option in the playback menu. Note that all photographstaken with Off selected for Image rotation ( 168) are displayed in wide (land-scape) orientation, regardless of the option selected for Rotate tall .
7Image Review ( 144)Photographs will not be displayed in the monitor during recording if Off is selected forCustom Setting 7 ( Image review ).
22Monitor Off ( 153)The monitor will turn off automatically to save pow er if no operations are performedfor the time spec ied in Cus tom Set ting 22 ( Monitor off ).
Single-Image PlaybackPhotographs are displayed in the monitor during recording and when thebutton is pressed.
Photographs taken in tall (portrait) orientationare displayed in tall orientation.
Press button at any time to dis-play most recent photograph.
1/1
100 NCD70 /DSC_0001.JPG NORMAL
TheButton
Photographs are automaticallydisplayed while being recorded to
memory card.
1/1
100 NCD70 /DSC_0001.JPG NORMAL
DuringRecording
10/10
100 NCD70 /DSC_0010.JPG NORMAL
8/12/2019 Nikon D70 User manual
125/218115
M or eA
b o u t P l a y b a c k
The following operations can be performed in single-image playback:
To PressTo Description
View additionalphotographs
Press multi selector down to view photographs in orderrecorded, up to view photographs in reverse order.
View photoinformation
Press multi selector left or right to view informationabout current photograph ( 116).
Viewthumbnails Press button to view thumbnail display ( 118).
( )Zoom in onphotographPress button for enlarged view of current photograph( 120).
Deletephotograph
Press button to deletecurrent photograph ( 122).Conrmation dialog will bedisplayed; press again todelete photo, or press anyother button to exit withoutdeleting photo.
1/9
100 NCD70 /DSC_0001.JPG NORMAL
Delete?Yes
Protect / removeprotection from
photograph
Images marked by icon can not be de leted usingbutton or Delete op tion in playback menu (note thatprotected im ag es will be deleted when memory card isformat ted). To protect image, or to remove pro tec tionfrom protected image, press button ( 121).
Displaymenus
Press to end playback and display camera menus (39).
Shutterrelease /End playback To end playback and return to shooting mode, pressbutton or press shutter-release button halfway.
8/12/2019 Nikon D70 User manual
126/218116
Mor eAb out P l ayb ac k
Photo InformationPhoto in forma tion is su per imposed on images displayed in single-im ageplayback. Press the multi-se lector left or right to cycle through photo in for-ma tion as follows: Shooting Data Page 2 Shooting Data Page 1 FileInformation Histogram Highlights.
File Information
1/9
100 NCD70 /DSC_0001.JPG NORMAL
6543
1 2 1 Protect status.........121 2 Frame number / total
number of images .126 3 Folder name ..........156
4 File name.................41 5 Image size ...............43 6 Image quality...........41
Shooting Data, Page 1
1/9
CAMERADATETIMEMETERING
HUTTERAPERTUREMODE E .+/ FOCA LENGTHFLA H MODE
: IKON D70: 01/0700: 057:13: :: IXTRM: 501/ : .6F: , 0.M, .: 4mm:
1 2
4
6
8
10
3
5
7
9
11
1 Protect status.........121 2 Frame number / total
number of images .126 3 Camera name 4 Date of recording.....16 5 Time of recording ....16 6 Metering .................75
7 Shutter speed ..........76 8 Aperture..................76 9 Exposure mode........76
Exposurecompensation..........86
10 Focal length...........18511 Flash control ............94
Shooting Data, Page 2
1/9
DEVELOPMENT
WHITE BAL.,, IZE, QUAL THARPNESS
TONECOLOR, HUE,
ATU ATION
: TOM0
: ..OAU: MALOL,: TOA: TA
0ODE1,: NORMA
1 2
4
6
8
10
3
5
7
9
1 Protect status.........121 2 Frame number / total
number of images .126 3 Image optimization..56 4 Sensitivity
(ISO equivalency) .....46 5 White balance .........48
White balanceadjustment ..............50
6 Image size ...............43Image quality...........41
7 Sharpening ..............57 8 Tone compensation..58 9 Color mode .............59
Hue .........................6010 Saturation................60
Image CommentsImage comments ( 163164) do not appear in the photo information display.
8/12/2019 Nikon D70 User manual
127/218117
M or eA
b o u t P l a y b a c k
Histogram
1/9
1 2
3
1 Protect status......................................................121 2 Frame number / total number of images...............126 3 Histogram showing the dis tribu tion of tones in the
image. The horizontal axis cor responds to pixelbright ness, with dark tones to the left and brighttones to the right. The vertical axis shows the num- ber of pix els of each brightness in the image.
Highlights
1/9
Highlights
1 32 1 Protect status......................................................121 2 Image high lights (brightest areas of image) are
marked by a ashing border. 3 Frame number / total number of images...............126
HistogramsCamera histograms are for use only as a guide and may differ from those displayed inimaging applications.
8/12/2019 Nikon D70 User manual
128/218118
Mor eAb out P l ayb ac k
Viewing Multiple Images: Thumbnail PlaybackTo display images in con tact sheets of four ornine images, press the button in single-imageplayback. The fol lowing operations can be per-formed while thumb nails are displayed:
To PressTo Description
Highlightphotographs
Press multi selector up, right, left, or down to highlightthumbnails.
Change num-ber of images
displayed
Press button to switch between four-thumbnail dis-
play, nine-thumbnail display, and single-image playback.
( )Zoom in onphotograph
Press button for enlarged view of highlighted photo-graph ( 120).
Deletephotograph
Press button to deletehighlighted photograph (122). Conrmation dialog willbe displayed; press againto delete photo, or press any
other button to exit withoutdeleting photo.
1 2
3 4
1 2
3 4
Delete?Yes
Protect / removeprotection from
photograph
Images marked by icon can not be de leted usingbutton or Delete op tion in playback menu (note thatprotected im ag es will be deleted when memory card isformat ted). To protect image, or to remove pro tec tionfrom protected image, press button ( 121).
Displaymenus
Press to end playback and display camera menus (39).
Shutterrelease /End playback To end playback and return to shooting mode, pressbutton or press shutter-release button halfway.
1 2
3 4
8/12/2019 Nikon D70 User manual
129/218119
M or eA
b o u t P l a y b a c k
Using the Multi SelectorThe multi selector can be used at any time when the monitor is on. The focus selectorlock switch only takes effect when the monitor is off.
22Monitor Off ( 153)The monitor will turn off automatically to save pow er if no operations are performedfor the time spec ied in Cus tom Set ting 22 ( Monitor off ).
8/12/2019 Nikon D70 User manual
130/218
8/12/2019 Nikon D70 User manual
131/218121
M or eA
b o u t P l a y b a c k
Protecting Photographs from DeletionIn full-frame and thumbnail playback, the button can be use to protectpho to graphs from ac ciden tal deletion. Protected les can not be deletedusing the button or the Delete op tion in the playback menu, and haveDOS read-only status when viewed on a Windows computer. Note thatpro tect ed im ag es will be de leted when the mem ory card is formatted.
To protect a photograph:
1 Display the image in full-frame playback or highlight it in the thumbnaillist.2 Press the button. The pho to graph will be marked with a icon.
To remove pro tec tion from the pho to graph so that it can be deleted, displaythe photograph in full-frame playback or high light it in the thumbnail list andthen press the button.
1/9
100 NCD70 /DSC_0001.JPG NORMAL
8/12/2019 Nikon D70 User manual
132/218122
Mor eAb out P l ayb ac k
Deleting Individual PhotographsTo delete a photograph displayed in single-image playback, or the pho to -graph highlighted in thumbnail playback, press the button. Once de-
leted, photographs can not be recovered.
1 Display the image in full-frame playback or highlight it in the thumbnaillist.2 Press the button. A conrmation dialog willbe displayed.
3 To delete the photograph, press the button again. Press any otherbutton to exit without deleting the photograph.
Protected and Hidden ImagesImages marked with a icon are protected and can not be deleted. Hidden imagesare not displayed in single-image or thumbnail playback and can not be selected fordeletion.
Delete ( 124)To delete multiple images, use the Delete option in the playback menu.
1 2
3 4
1 2
3 4
Delete?Yes
1/9
100 NCD70 /DSC_0001.JPG NORMAL
Delete?Yes
1 2 3
7 8 9
654
Delete?Yes
8/12/2019 Nikon D70 User manual
133/218
8/12/2019 Nikon D70 User manual
134/218124
MenuGui d eT h eP l ayb ac k Menu
The playback menu contains the following options:
The Playback MenuManaging Images
NCD70
N2s
Delete
Pla back fldrRotate tallSlide showHide ima ePrint set
Option
Delete 124125Playback dr 126
Rotate tall 126
Slide show 127128
Hide image 129
Print set 130131
The playback menu is not displayed when no memory card is inserted.
DeleteTo display the delete menu, highlight Delete andpress the multi selector to the right. Press the multiselector up or down to highlight an option, thenpress to the right to make a selection.
Delete
Selected
All
High-Capacity Memory CardsIf the memory card contains a large number of les or folders and the number of pic-tures to be deleted is very large, deletion can sometimes take more than half an hour.
Protected and Hidden ImagesImages marked with a icon are protected and can not be deleted. Hidden images ( 129) are not displayed in the thumbnail list and can not be selected for deletion.
Using the Multi SelectorThe multi selector can be used at any time when the monitor is on. The focus selectorlock switch only takes effect when the monitor is off.
Option DescriptionSelected Delete se lected photographs.
All Delete all photographs.
8/12/2019 Nikon D70 User manual
135/218125
M en u
G ui d eT h eP l a y b a
c k M en u
Repeat steps 1 and 2 to select additional pictures. To deselect picture,highlight and press center of multi selector. To exit without deletingpictures, press button.
3
Deleting Selected Photographs: Selected Choosing Selected displays the photographs in the fold er or folders selectedin the Playback dr menu ( 126) as small thumb nail images.
Highlight image.
OK
1 2 3
4 5 6
Set1
Select highlighted image. Selected
image marked by icon.
OK
1 2 3
4 5 6
Set2
Deleting All Photographs: All Choosing All displays the conrmation dialogshown at right. Press the multi selector up ordown to highlight an option, then press thebutton to make a selection. Yes : delete all images in the folder or folders
selected in the Playback dr menu ( 126).Pictures that are protected or hidden will not bedeleted.
No : exit without deleting images.
All
Yes
No OK
Deleteall images?
Selected
Yes
No OK
Delete1 ?
4 Conrmation dialog displayed. Pressmulti selector up or down to highlightoption, press to select.
Yes : delete selected pictures No: exit without deleting images
8/12/2019 Nikon D70 User manual
136/218126
MenuGui d eT h eP l ayb ac k Menu
Playback FldrTo display the playback folder menu, highlightPlayback dr in the playback menu ( 124) andpress the multi selector to the right. Press themulti selector up or down to highlight an option,then press to the right to make a selection.
Playback fldr
Current
All
OK
Option Description
Current
Only images in folder currently selected for storage in setup Folders menuare displayed during playback ( 156). This option is selected automatical-
ly when photo is taken. If memory card is inserted and this option selectedbefore photos have been taken, message stating that folder contains noimages will be displayed during playback. Select All to begin playback.
AllImages in all folders created by cameras that conform to Design Rule forCamera File System (DCF)all Nikon digital cam eras and most other makesof digital camerawill be vis ible during playback.
Rotate TallTo choose whether photographs taken in tall(portrait) orientation are automatically rotated fordisplay in the monitor, highlight Rotate tall inthe playback menu ( 124) and press the multiselector to the right. Press the multi selector upor down to highlight an option, then press to theright to make a selection.
Rotate tall
Yes
No
OK
Option Description
Yes(default)
Tall (portrait) orientation photos are displayed in tall orientation duringplayback (to t in monitor, tall orientation photos are displayed at 2 / 3 thesize of other photographs).
No Tall (portrait) orientation photos are not played back in tall orientation.
Image Rotation ( 168)Photographs taken with Off selected for Image rotation are displayed in wide(landscape) orientation, regardless of the option selected for Rotate tall .
8/12/2019 Nikon D70 User manual
137/218
8/12/2019 Nikon D70 User manual
138/218128
MenuGui d eT h eP l ayb ac k Menu
The dialog shown at right is displayed when theshow ends or when the button is pressed topause playback. Press the multi selector up or
down to highlight an option, then press to theright to make a selection. Restart : Resume slide show. Frame Intvl : Change the length of time each
picture is displayed.
To exit the slide show and return to the playback menu, press the multi se-lector to the left or press the button.
Changing the Display Interval: Frame Intvl Selecting Frame intvl from the Slide show menuor the pause menu displays the menu shown atright. To change the length of time each image isdisplayed, press the multi se lector up or down tohighlight the ap pro priate op tion and then pressthe multi se lector to the right to return to theprevious menu.
RestartFrame intvl
OK
2s3s5s10s
Frame intvl 2 s
10 s
5 s
3 s
OK
8/12/2019 Nikon D70 User manual
139/218129
M en u
G ui d eT h eP l a y b a
c k M en u
Hide ImageThe Hide image option is used to hide or revealselected photographs. Hidden images are visibleonly in the Hide image menu, and can only bedeleted by formatting the memory card. High-light Hide image in the playback menu ( 124)and press the multi selector to the right. The pho-tographs in the fold er or folders selected in thePlayback dr menu ( 126) will be displayed assmall thumb nail images.
Set OK
1 2 3
4 5 6
Highlight image.
OK
1 2 3
4 5 6
Set1
Select highlighted image. Selectedimage marked by icon.
Set OK
1 2 3
4 5 6
2
Repeat steps 1 and 2 to selectadditional pictures. To deselectpicture, highlight and presscenter of multi selector. To exitwithout changing hidden statusof pictures, press button.
3
Complete operation and return to
playback menu.
Done
OKSet4
File Attributes for Hidden ImagesHidden images have hidden and read-only status when viewed on a Windowscomputer. In the case of photographs taken at an image quality of NEF+JPEG Basic ,this marking applies to both the NEF (RAW) and JPEG image.
Protected and Hidden ImagesRemoving protection from an image that is both hidden and protected will simultane-ously reveal the image.
8/12/2019 Nikon D70 User manual
140/218130
MenuGui d eT h eP l ayb ac k Menu
Print Set Print set is used to create a digital print order that lists the photographsto be printed, the number of copies, and the information to be included oneach print. This information is stored on the memory card in Digital PrintOrder Format (DPOF). The card can then be removed from the camera andused to print the selected images printed on any DPOF-compatible device.
Highlight Print set in the playback menu ( 124)and press the multi selector to the right. Press themulti selector up or down to highlight an option,then press to the right to make a selection.
Print set
Select / set
Deselect all?Option Description
Select / set Select photographs for printing.
Deselect all? Remove all images from print order.
If Print Set Is UnavailableIf the Print set option is not available in the playback menu, there is not enough spaceon the memory card to store the print order. Delete some pictures and try again.
Taking Pictures for Direct PrintingWhen taking photographs to be printed without modication, choose Direct Printfor Optimize image ( 56) or select Custom and set Color mode to I a (sRGB) orIII a (sRGB) .
After Creating a Print OrderAfter creating a print order, do not change the hidden status of images in the printorder or use a computer or other device to delete images. Either action could causeproblems during printing.
DPOF Digital Print Order Format (DPOF) is an industry-wide standard that allows pictures tobe printed from print orders stored on the memory card. Before printing, check thatthe printer or print service supports DPOF.
Exif version 2.21
The D70 supports Exif ( Exchangeable Image File Format for Digital Still Cameras) ver- sion 2.21, a stan dard that al lows in forma tion stored with pho to graphs to be used foroptimal color re pro duc tion when im ag es are output on Exif-compliant print ers.
8/12/2019 Nikon D70 User manual
141/218131
M en u
G ui d eT h eP l a y b a
c k M en u
Modifying the Print Order: Select / Set Choosing Select / set displays the photographs in the fold er or folders se-lected in the Playback dr menu ( 126) as small thumb nail images.
Complete print order and display menu of print options. Press multi selectorup or down to highlight option. To print shutter speed and aperture on all pictures in print order, highlight
Data imprint and press multi selector to right. will appear next to item. To print date of recording on all pictures in print order, highlight Imprint
date and press multi selector to right. will appear next to item. To deselect checked item, highlight and press multi selector to right.To complete print order and return to playback menu, highlight Done andpress multi selector to right. To exit without altering print order, pressbutton.
--
Print set
Done
Data imprint
Imprint date
OK4
Set OK
1 2 3
4 5 6
1 Highlight image.
Set OK
1 2 3
4 5 6
012 Press multi selector up to select high-lighted image and set number of printsto 1. Selected images are marked byicon. Press multi selector up or downto specify number of prints (up to 99).
Repeat steps 1 and 2 to select additional pictures. To deselect picture,press multi selector down when number of prints is 1. To exit withoutchanging print order, press button.3
8/12/2019 Nikon D70 User manual
142/218132
MenuGui d eT h eS h oot i ngMenu
The shooting menu contains the following options:
The Shooting MenuShooting Options
OFF
200
NORM
NOptimize image
Lon ex . NRIma e ualitIma e sizeWhite al.ISO
Option
Optimize image*
5661Long exp. NR 133
Image quality 4142
Image size 4345
White bal. * 4855
ISO 4647
Optimize ImageWhen the mode dial is set to P, S, A, or M, pho-tographs are enhanced according to the optionselected in the Optimize image menu. See Tak-ing Photographs: Optimizing Images for details( 56). SF
DP
SHVIN
Optimize imageOKNormal
VividSharperSofter
Direct Print
Using the Multi SelectorThe multi selector can be used at any time when the monitor is on. The focus selectorlock switch only takes effect when the monitor is off.
* Available only when mode dial is set toP
,S
,A
, orM
.
8/12/2019 Nikon D70 User manual
143/218
8/12/2019 Nikon D70 User manual
144/218134
MenuGui d eT h eS h oot i ngMenu
Image QualityImage quality can be selected from the optionsshown at right. For more information, see TakingPhotographs: Image Quality and Size ( 41).
RAW
FINE
NORM
BASIC
RAW+B
NEF(Raw)JPEG FineJPEG NormalJPEG BasicNEF+JPEG Basic
Image quality
OK
Image SizeImage size can be selected from L (3008 2000) ,M (2240 1488) , and S (1504 1000) . See Tak-ing Photographs: Image Quality and Size ( 43)for more information.
L (3008 x2000 )
M(2240 x1488 )
S (1504 x1000 )
Image size
OK
White Bal.This option is only available when the mode dial is
rotated to P, S, A, or M. For more information, seeTaking Photographs: White Balance ( 48).
White bal.AutoIncandescentFluorescentDir. sunlightFlash
ISOSensitivity (ISO equivalency) can be raised abovethe default setting of ISO 200 equivalent. SeeTaking Photographs: Sensitivity (ISO Equivalency)( 46) for details.
ISO200250320400500
OK
8/12/2019 Nikon D70 User manual
145/218
8/12/2019 Nikon D70 User manual
146/218
8/12/2019 Nikon D70 User manual
147/218
8/12/2019 Nikon D70 User manual
148/218138
MenuGui d eC us t omS et t i ngs
Custom Setting 1: BeepTo turn the camera speaker on or off, highlightBeep in the CSM menu ( 135) and press the
multi selector to the right. Press the multi selectorup or down to highlight an option, then press tothe right to make a selection.
?
01 Beep
On OK
Off
Option Description
On(default)
Speaker on; displayed in control panel. Beepsounds while release timer is running (self-timer
and delayed remote modes), when photo is takenin quick-response remote mode, or when camerahas focused in single-servo AF (focus-mode selectorset to AF and AF-S selected for Custom Setting 2).
Off Speaker off; beep does not sound. displayed incontrol panel.
8/12/2019 Nikon D70 User manual
149/218139
M en u
G ui d e C u s t om S e t t i n g s
Custom Setting 2: AutofocusTo choose how the camera focuses when the fo-cus-mode selector is set to AF, highlight Autofo-
cus in the CSM menu ( 135) and press the multiselector to the right. Press the multi selector upor down to highlight an option, then press to theright to make a selection. ?
02 Autofocus
AF-S OK
AF-C
Option Description
AF-S *
Single-servo AF ( 64) . Focus locks when in-focusindicator ( ) appears in viewnder; photographs
can only be taken when camera is in focus. AF-S displayed in control panel when focus-mode se-lector is set to AF.
AF-C
Continuous-servo AF ( 64) . Camera focusescontinuously while shutter-release button is pressedhalfway; photographs can be taken even whencamera is not in focus. AF-C displayed in controlpanel when focus-mode selector is set to AF.
* Default for P, S, A, M, , , , , , and modes. Custom Setting 2 automati-cally reset to AF-S when mode dial rotated to , , , , , or .
Default for mode. Custom Setting 2 automatically reset to AF-C when mode dialrotated to .
8/12/2019 Nikon D70 User manual
150/218140
MenuGui d eC us t omS et t i ngs
Custom Setting 3: AF-Area ModeTo choose how the focus area is selected whenthe focus-mode selector is set to AF, highlight AF-
area mode in the CSM menu ( 135) and pressthe multi selector to the right. Press the multiselector up or down to highlight an option, thenpress to the right to make a selection. ?
Sing le area OK
03 AF-area mode
Closest sub jct
Dynamic area
1 Control panel and viewnder shown with center focus area selected.2 Default for P, S, A, M, and modes. Custom Setting 3 automatically reset to Single
area when mode dial rotated to .3 Default for , , , , , and modes. Custom Setting 3 automatically reset to
Closest subjct when mode dial rotated to , , , , , or .4 Active focus area displayed in viewnder when camera focuses.
DescriptionOption
User selects focus area manually ( 66); cam-era focuses on subject in selected focus areaonly. Use for relatively static com po sitions withsub jects that will stay in selected focus area.Also recommended with telephoto lenses orwhen subject is poorly lit.
Singlearea 1, 2
User selects focus area manually ( 66), butcamera uses information from multiple focusareas to de ter mine focus. If sub ject leaves se-lected focus area even briey, cam era will focus
based on in forma tion from oth er focus areas(focus area selected in viewnder does notchange). Use when fol lowing erratically moving subjects and in oth ersituations in which it is difcult to keep subject in se lected focus area.
Dynamicarea 1
Camera automatically selects focus area con-taining subject closest to camera; active focusarea highlighted when camera focuses ( 8).If sub ject leaves active focus area, cam era willfocus based on in forma tion from oth er focusareas. When AF-S is selected for Custom Set-ting 2 ( Autofocus; 139), focus will lock once camera has focused.Prevents out-of-focus shots when photographing erratically movingsubjects.
Closestsubjct 3, 4
8/12/2019 Nikon D70 User manual
151/218
8/12/2019 Nikon D70 User manual
152/218142
MenuGui d eC us t omS et t i ngs
Custom Setting 5: ISO AutoTo choose whether the camera automatically ad-
justs sensitivity (ISO equivalency) as necessary to
achieve optimal exposure and ash level, highlightISO auto in the CSM menu ( 135) and press themulti selector to the right. Press the multi selectorup or down to highlight an option, then press tothe right to make a selection.
?
05 ISO auto
Off OK
On
Option Description
Off
(default)
Sensitivity remains xed at value selected by user ( 46), even if optimal
exposure can not be achieved.
On
If optimal exposure and ash level can not beachieved at sensitivity selected by user, sensitivityis adjusted to compensate, to minimum approxi-mately equivalent to ISO 200 and a maximumapproximately equivalent to ISO 1600. ISO AUTO icon is displayed in control panel and viewnder;unless Speedlight is used, icon blinks when sensitivity is altered from valueselected by user. Note that noise is more likely at high sensitivities. When mode dial is set to P , A , , , , , , , or : camera au-
tomatically adjusts sensitivity when shutter speed needed to obtain opti-mum exposure would be faster than 1 / 8000 s or slower than value speciedfor P, A, DVP mode ( 143; shutter speed may drop below speciedvalue if optimal exposure can not be achieved at ISO 1600 equivalent).
When mode dial is set to S: camera automatically adjusts sensitivitywhen limits of camera exposure me ter ing system are exceeded.
When mode dial is set to M: camera automatically adjusts sensitivity
when optimum exposure can not be achieved at selected shutter-speedand aperture.
Using a FlashIf a high sensitivity is required for optimal ash output when ISO auto is on, the back-ground may be overexposed if the ash is used at slow shutter speeds (slow sync), inbright daylight (daylight sync), or the when the background is brightly lit.
ISO Value
The value displayed for sensitivity (ISO equivalency) when the ISObutton is pressed isthe value selected by the user. The value shown when ISO auto is on may differ fromthe value actually used by camera.
8/12/2019 Nikon D70 User manual
153/218143
M en u
G ui d e C u s t om S e t t i n g s
Selecting On displays the menu shown at right.To accept the current setting for P, A, DVP mode and turn ISO auto on, highlight Done and press
the multi selector to the right. The CSM menuwill be displayed.
05 ISO auto
Done OK
P, A, DVP mode
To change the shutter speed limit for P, A, , ,, , , , and modes, highlight P, A, DVP
mode and press the multi selector to the right.Press the multi selector up or down to highlight ashutter speed between 1 / 125 to 30 s in steps equiva-lent to 1 EV and press the multi selector to theright to select the highlighted value and returnto the CSM menu. In P, A, , , , , , , and modes, the camerawill automatically raise sensitivity when the shutter speed needed to obtainoptimum exposure would be slower than the selected value.
Custom Setting 6: No CF Card? To choose whether the shutter can be releasedwhen no memory card is inserted in the camera,highlight No CF card? in the CSM menu ( 135)and press the multi selector to the right. Press themulti selector up or down to highlight an option,then press to the right to make a selection.
05 P, A, DVP mode
OK
1/1251/601/301/151/8
?
Release locked
Enable release
06 No CF card?
OK
Option Description
Release lock(default)
Shutter-release button disabled when no memory card is inserted.Shutter release will not lock if Nikon Capture 4 version 4.1 or later(available separately) is being used to record photographs to com-puter.
Enablerelease
Shutter-release button enabled even when no memory card is in-serted.
8/12/2019 Nikon D70 User manual
154/218144
MenuGui d eC us t omS et t i ngs
Custom Setting 7: Image Review This option determines whether photographsare automatically displayed in the monitor after
shooting ( On , the default option) or only whenthe button is pressed ( Off ). Highlight Imagereview in the CSM menu ( 135) and press themulti selector to the right. Press the multi selectorup or down to highlight an option, then press tothe right to make a selection. Regardless of the option selected, photo-graphs can be viewed at any time by pressing the button.
Custom Setting 8: Grid Display (On-Demand Grid Lines)On-demand grid lines can be displayed in theviewnder for reference when composing pho-tographs, taking landscape shots, or shifting ortilting a PC Nikkor lens. To turn the grid-linedisplay on or off, highlight Grid display in theCSM menu ( 135) and press the multi selectorto the right. Press the multi selector up or down
to highlight an option, then press to the right to make a selection. To displaythe grid, select On . The default setting is Off (no grid displayed).
Custom Setting 9: EV StepThis option determines whether adjustments toshutter speed, aperture, exposure compensation,bracketing, and ash exposure compensation aremade in increments equivalent to 1 / 3 EV (1/3 step ,
the default option) or EV ( 1/2 step ). HighlightEV step in the CSM menu ( 135) and press themulti selector to the right. Press the multi selectorup or down to highlight an option, then press to the right to make a selec-tion.
?
07 Image review
On OK
Off
?
08 Grid display
Off OK
On
?
09 EV step
OK1/3 ste p
1/2 ste p
8/12/2019 Nikon D70 User manual
155/218145
M en u
G ui d e C u s t om S e t t i n g s
Custom Setting 10: Exp Comp.This option controls whether the button isneeded to set exposure compensation in P, S,
and A modes ( 86). Highlight Exp comp. in thedetailed CSM menu ( 135) and press the multiselector to the right. Press the multi selector upor down to highlight an option, then press to theright to make a selection.
?
10 Exp comp.
Off OK
On
Option Description
Off
(default)
On
Exposure compensation set by rotating command dial only. Dial used de-pends on option selected for Custom Setting 14.
Exposure compensation set by pressing button and rotating main
command dial.
Custom Setting 14
Yes
Sub-command dial
Main command dial
Sub-command dialMain command dial
Sub-command dial
Sub-command dial
No
M o d e
S
A
P
This option has no effect in M, , , , , , , and modes.
Custom Setting 11: Center Wtd When calculating exposure, center-weightedmetering (available in P, S, A, and M modes;75) assigns the greatest weight to a circle in the
center of the frame. The diameter ( ) of this circlecan be selected from 6, 8, 10, and 12 mm (th