Download - New Product Brochure USA

OVERSIZE BEARING BIT

DIAMOND SHARPENING

NEWDIAMOND

SHARPENING TAPERED FILES

MEASURING & MARKING

VARIJIG CLAMP GUIDES

COMBINATION ROUTER BASE

■ Ideal for flattening chisels and plane blades as well as achieving a shaving edge in seconds.

■ Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) monocrystalline diamond, grades clearly marked.

■ The 1000 grit is ideal for a fine finish on carving tools.

■ Substrate pre-ground to +/- 0.0005” for precision flatness.

■ Guaranteed for five years when used with Trend lapping fluid. Lapping fluid prevents clogging and rusting and it helps keep diamond stone clean.

■ Complete with cleaning block and non slip mat.

■ Ideal for sharpening HSS and carbide inserts.

6” X 2” BENCH STONEDouble-sided site and work bench stone.

U*DWS/W6/FCProduct Ref.

■ 8” x 3” classic professional stone.

■ Ideal for up to 3 inch plane irons and chisels.

■ Unique clearance channels produce faster, cleaner cut.

■ Substrate pre-ground to +/- 0.0005” for precision flatness.

■ Continual diamond surface on fine side prevents snagging when sharpening small or pointed tools.

■ Complete with pouch, cleaning block and non slip mat.

■ Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) monocrystalline diamond.

■ Grits are clearly marked on the stone.

■ Guaranteed for five years when used with Trend lapping fluid. Lapping fluid prevents clogging and rusting and it helps keep diamond stone clean.

■ Combination of unique clearance channels (300 grit) and continual diamond surface (1000 grit).

8” X 3” CLASSIC PROFESSIONAL STONEDouble-sided site and workshop bench stone.

U*DWS/CP8/FCProduct Ref.

“Every woodworker should have one of these.”

- Michael Hosaluk, Artist & Maker-

DIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENING

1

“Every woodworker should “Every woodworker should

“I used the 300 grit side of the bench stone, again the results were exceptional & I have tried using the 1000 grit side on a spindle gouge doing some fi nishing work

and I am well pleased! I like this stone very much.”- Morris Schlesinger, Professional Woodturner & Master Woodworker -

DIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENINGDIAMOND SHARPENING

■ Precision quality taper file.

■ Fine 400 grit (40 micron) monocrystalline diamond.

■ Guaranteed for five years.

■ Split plastic contoured hand-grip which is pinned either side of blade.

■ Handle 1/2 inch thick by 2-1/2 inch long.

■ Hanging hole on handle.

■ Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, routers, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.

■ Precision quality taper file.

■ Fine 600 grit (25 micron) monocrystalline diamond.


■ Split plastic contoured hand-grip which is pinned either side of blade.

■ Handle 7/16 inch thick by 2-1/2 inch long.

■ Hanging hole on handle.

■ Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, router bits, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.

■ Fine 600 grit (25 micron) & 300 grit (50 micron) monocrystalline diamond.


■ Diamond is electroplated onto a steel substrate which is molded onto the hardened plastic handle. The result is an extremely durable, versatile and strong product.

■ Overall length 7 inch.

■ Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, router bits, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.

3” FINE TAPERED FILEA versatile 3 inch half round/flat tapered file suitable for woodworking, gardening & domestic tooling.

3” MINI FINE TAPERED FILEA versatile 3 inch half round/flat mini tapered file suitable for woodworking, gardening & domestic tooling.

MACHINIST FILE FINE/COARSEDouble sided 2-3/8 inch machinist file.

U*DWS/TF3/FProduct Ref.

U*DWS/TF3M/FProduct Ref.

U*DWS/MF/FCProduct Ref.Product Ref.

“Every woodturner should own this tool. Sharpen skews,

gouges, scrapers and even carbide inserts in seconds.”

- Jimmy Clewes, Professional Woodturner -

2

“This product does a real nice job for you.

Handy and versatile, a cool new product.”

- George Vondriska, WoodWorkers Guild of America -

Product Ref.

“I produce a razor sharp edge on forstner bits in seconds when utilizing

the Trend mini taper fi le.”- Morris Schlesinger, Professional Woodturner & Master Woodworker -

the Trend mini taper fi le.”

“Every woodturner should own this tool. Sharpen skews,

gouges, scrapers and even carbide inserts in seconds.”

, Professional Woodturner -

own this tool. Sharpen skews,

carbide inserts in seconds.”

■ Base plate engages in the T-slot in the extrusion.

■ Made from clear plastic.■ Includes adjustable

guide bar for perfect tracking using hex key provided.

ROUTER BASE PLATEPlunge router base accessory.

VARIJIG CLAMP GUIDES Self clamping, straight line clamp guides that use the Varijig low profi le extrusion.

ACCESSORIES A range of accessories for use with our Varijig Clamp Guides.

■ For accurate guiding of routers, saws and jigsaws.

■ Low profile extrusion with integral clamping of work-piece, double locking mechanism and two full length T-slots.

■ Common Varijig extrusion to 24 inch (610mm), 36 inch (915mm) and 50 inch (1270mm) Clamp Guides.

■ Metric and imperial sliding scale.

■ Extrusion profile 5/8” (16mm) high x 2-1/8” (54mm wide).

■ Ref. VJS/CG/PRO8 is an extra wide clamp 5” (127mm) with four T slots. Ideal for large sheet material. Clamps up to 8 foot (2.44 metre).

■ Jaws have fixing holes for accessories.

Extra wide clampRef. U*VJS/CG/PRO8

888 FOOT FOOT FOOT AVAILABLEAVAILABLEAVAILABLEAVAILABLEAVAILABLEAVAILABLE

■ Base plate engages in the T-slot in the extrusion.

■ Includes adjustable guide bar for perfect tracking using hex key provided.

SAW BASE PLATECircular saw base accessory.

BASE PLATECircular saw base accessory.

BASE PLATEBASE PLATECircular saw base accessory.

■ Engages in the T-slot on the clamp guide extrusion and can be locked in position using locking knob.

END STOP BLOCKAdjustable end stop block.

■ Gives better leverage to operate the clamp, especially when more clamping pressure is required.

■ Increases lever length by 5-1/4” (134mm).

■ Can be fitted and removed quickly.

HANDLE EXTENSIONLever extension handle for Varijig clamp guides.

U*VJS/CG/24 (24 inch / 610mm)



U*VJS/CG/PRO8 (8 foot / 96 inch / 2440mm)

Product Ref.

Router and cutter not included.

U*VJS/CG/RBPProduct Ref.

U*VJS/CG/SBPProduct Ref.

U*VJS/CG/ESBProduct Ref.

U*VJS/CG/EXTProduct Ref.

Router, bit and guides not included.

VARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIES

3

■ Ideal for repetitive grooves. ■ Removable alloy adjustable bridge guide

stop can be locked in place.■ Bridge travel is 6-15/16” (176mm).■ Can be used as a length stop.

ADJUSTABLE SETTING GUIDE & STOP

■ Distributes clamping pressure over the workpiece to minimise clamping marks.

■ Built-in mounting holes allow a batten to be fitted.

■ Includes fixing screws.

■ Large 90º head allows clamp to be used as a clamping T-square.

■ Serrated front edge.■ Includes fixing screws.

■ Clamp one guide to the bench and attach another clamp upside down.

■ Two clamps joined together creates a 4-3/8” (112mm) wide component support surface which is ideal for sanding.

■ Six adapters are included so three pairs of clamps can be linked securely together.

WIDE JAW KITPair of plastic jaws for fitting onto the jaws of the Varijig clamp guides.

SQUARING ATTACHMENTAllows varijig clamp guide to be squared up for maximum accuracy.

SIDE-TO-SIDE CLIPS

■ Clamps to the Varijig clamp guide which can then be easily clamped to a router table top.

■ Provides horizontal side pressure.

■ Includes fixing kit.

■ Clips comprise of alloy brackets and knobs.

■ Raises component up 1-1/4” (32mm) for unobtrusive clamping especially for full edge mould work.

FEATHER BOARDFeather board finger pressure accessory.

BACK-TO-BACK CLIPSAllows two Varijig clamp guides to be joined back to back.

VARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIESVARIJIG CLAMP GUIDES & ACCESSORIES

A short alloy extrusion rail that can be fixed anywhere along the length of the Varijig clamp guide, so it limits the rail travel in a set position from an edge.

EIGHT CLIPSEIGHT CLIPSEIGHT CLIPSEIGHT CLIPSEIGHT CLIPSEIGHT CLIPS

SIX CLIPSSIX CLIPSSIX CLIPSSIX CLIPSSIX CLIPSSIX CLIPSU*VJS/CG/SSCProduct Ref.

U*VJS/CG/BBCProduct Ref.

U*VJS/CG/FBProduct Ref.

U*VJS/CG/WJKProduct Ref.

U*VJS/CG/SQAProduct Ref.

U*VJS/CG/AGSProduct Ref.

For Varijig Clamp Guides only. Router and guides not included.

Allows two clamp guides to join side-to-side to clamp workpiece to workbench, obstruction free.

■ 360 degree clamps.■ Clamp rotates to allow the pad of the clamp to be

secured firmly to the work-piece.■ The clamp can be used with the Varijig system including

the varijig set, straight guides and angle guide.■ Aluminium body.■ Friction lock design, so they can be positioned in

extrusion without sliding out end when clamp lifted up.■ Soft pads to prevent marring of component.

VARIJIG EXTRA LONG PIVOT CLAMPPair of pivoting sliding friction clamps with 2 inch clamping thickness.

U*VJS/PCK/LProduct Ref.

Pair of pivoting sliding friction clamps with 2 inch clamping thickness.

4

■ Digital display for angles.

■ Stainless steel rule with metric/imperial scale, scale length 500mm and 18-1/2 inch.

■ Measuring range from 000.0 deg to 360.0 deg, with accuracy of 0.3 deg.

■ Rule locking function.

■ Easy operation with two press buttons.

■ Auto-shut off in 6 minutes.

■ For hand routers, router tables and saw benches.

■ LCD readout for mm, imperial and fractions with auto shut off 5 mins.

■ Removable pin to allow hole depths to be measured. Pin can be parked on arm. Hole depth 2 inch.

■ Self standing with magnetic feet and flat back.

■ Injection plastic moulding with plastic rule.

■ Read-out has relative co-ordinate and absolute function.

■ 2-3/8 inch wide aperture.

20” DIGITALANGLE RULECalculates angles quickly and accurately and is ideal for woodworking, construction, and machining.

DIGITAL DEPTH GAUGEFor router tables and saw benches. Horizontal and vertical measuring.

U*GAUGE/D60Product Ref.

U*DAR/500Product Ref.

OVERSIZEBEARING BITfor use with the Porter Cable Strike & Latch and Door Hinge templets.

TOOL & BITCLEANERAn industrial grade tool and bit cleaner to remove pitch and resin build-up from sawblades, router bits, planer blades, drill bits etc.

■ Useful when making jigs, templet and patterns.

■ Shank mounted bearing guided.

■ Down shear for clean cut.■ Equivalent to Porter-

Cable® Ref. 43671.■ 1/2” (12.7mm) diameter

x 3/8” (9.5mm) cut with 5/8” (15.9mm) diameter bearing.

■ Acts as an excellent lubricant and increases tool life.

■ Biodegradeable, earth & human friendly. Non-toxic and non-flammable.

■ Has unique properties which break the molecular bond and lifts the dirt from the tool as opposed to eating away the dirt like citrus cleaners and other chemicals.

■ Can be used to keep table saw top rust free.

U*T108X1/4TCProduct Ref.

(1/2” dia x 3/8” cut)

U*CLEAN/500 (18 fl.oz)

U*CLEAN/5GAL (5 gallon)

U*CLEAN/55GAL (55 gallon)

Product Ref.

5

5 gallon buckets and

55 gallon drums also available.

COMBINATION ROUTER BASE

■ Quick Fit Base■ Multi-functional■ Improved Accuracy■ Greater Stability■ Superior Finish■ Saves Time

FUNCTIONS7

Offset BaseFor better control when

edge routing.

1

Offset MortisingFor timber thickness 2”

(50mm) to 7-7/8” (200mm).

5

Router CompassFor routing circles of 3/4” (19mm)

to 8-13/16” (224mm) radius.

2

False Panel Groove Copier

For creating repeated grooves.

6

Clamp Guide Adjustable Grooving

With 1-1/2” (40mm) micro adjustment.

3

Anti-tilt SupportFor stable edge work. Height range

5/16” (8mm) to 3-1/8” (80mm).

4

Varijig Frame SystemAnti-tilt facility for panel cutting when

used with the Varijig.

7

■ Trim Base with bearing guide follower for flush edge trimming of hardwood lippings Ref. CRB/TB.

■ Extension Rods for increasing circle radius by 22” (560mm) Ref. N/COMPASS/AEX.

MORE FUNCTIONS WITH ACCESSORIES+2

A quick change, multi-functional router base. Fits most routers with 5/16” (8mm), 25/64” (10mm) and 15/32” (12mm) diameter rods at 3-1/16” (78mm) to 5-1/8” (130mm) centers.

MULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONALMULTI-FUNCTIONAL

Router, cutter, clamp guide and jig accessories not included.

U*CRB

U*CRB/TB (Trim Base)

U*N/COMPASS/AEX (2 pairs extension rod)

U*GB40/B 40mm (1-37/64”) x 14mm (35/64”) guide bush)For use with unguided cutters with the Varijig Frame System

Product Ref.

Accessories

6

Available from:

Trend Dealers. Please see website for details.

© Copyright Trend 2012. Our policy of continuous improvement means that

specifications may change without notice. Trend

Machinery and Cutting Tools cannot be held liable for any material rendered unusable or any form of consequential

loss. E&OE ® All trademarks acknowledged.

Trend Routing Technology Inc.7351 West Friendly AvenueSuite A Greensboro NC 27410Telephone Toll Free: 877 918 7363Telephone: 336 292 [email protected]

RECYCLABLE

PROFESSIONAL SAW BLADESOur Tungsten Carbide Tipped Circular Sawblades are designed and manufactured to exact tolerances and give a professional fi nish in wood, MDF, particle board, hardboard and plywood.

■ Accurate cuts and a smooth fi ne fi nish.

■ 29 sku range from 5-3/8” to 12” in diameter.

■ Unique features/function on slide compound miter and wood cutting blades.

U*N

PP/U

SA