Multipurpose machine for inset and offset applications.
Slipform PaversSP 64 | SP 64 i
7 |
11 |12 |
At a glance: outstanding features of the new SP 64 / SP 64 i
Highlights in engine technology and operation (pages 6 /7)
5 | EFFICIENT ENGINE MANAGEMENT
The ECO MODE feature automatically adjusts the engine output to the current performance requirements, thus ensuring reduced diesel consumption and low noise emission levels.
6 | STATE-OF-THE-ART ENGINE TECHNOLOGY
The SP 64 features state-of-the-art, high-performance engine technology (155 kW / 208 HP / 211 PS) complying with exhaust emission standards EU Stage 3a / US Tier 3.The SP 64 i features state-of-the-art, high-performance en-gine technology (180 kW / 241 HP / 245 PS) complying with exhaust emission standards EU Stage 4 / US Tier 4f.
7 | PERFECT ERGONOMIC DESIGN AND HANDLING
Relaxed working is ensured by the ergonomically designed workplace offering a user-friendly operating concept and perfect visibility.
Highlights in concrete paving (pages 4 / 5)
1 | EXCEPTIONAL FLEXIBILITY IN CONCRETE PAVING
The slipform paver achieves perfection in the highly pre-cise paving of standard concrete slabs at widths ranging from 2.00 m to 7.50 m and layer thicknesses of up to 450 mm. Paving widths of up to 6.00 m can be realized with paver configurations including dowel bar inserter (DBI) and electric vibrator drive.
2 | TRIED-AND-TESTED SLAB PAVING MOULD
Metric inset slab paving moulds of the 910 m or 910 wm series are on offer. The 910 wm series is equipped with a wearing pan in standard design and central crown as an optional feature.
3 | MACHINE-INTEGRATED INSERTION OF STEEL REINFORCEMENT
A self-loading dowel bar inserter, central tie bar inserter(s) and side tie bar inserter(s) are available as optional fea-tures in accordance with customer requirements.
4 | OPTIONS IN CONCRETE COMPACTION
Depending on customer requirements, the paver can be equipped with a hydraulic or electric vibrator drive. In standard design, it comes with 12 hydraulic connectors (optionally 18) but can optionally be fitted with 18 or 24 electric connectors.
02 03
1 |
2 |
3 |
4 |
5 |
6 |
9 |
10 |
8 |
Highlights in machine control (pages 8 / 9)
8 | HIGHLY PRECISE STEERING AND DRIVE SYSTEMS
Intelligent steering and control systems for exceedingly quiet operation even in narrow bends guarantee precision in concrete paving.
9 | MACHINE CONTROL SYSTEMS FEATUR-ING ADVANCED INTELLIGENCE
The standardized interface for quick, targeted service diag-nostics and the state-of-the-art WITOS® telematics system increase efficiency in everyday operation.
10 | FIELD-PROVEN 3D INTERFACE
The optional interface guarantees tested compatibility with the 3D control systems of leading suppliers.
Highlights in modular design (pages 10 / 11)
11 | FULLY MODULAR MACHINE DESIGN
The paver’s fully modular design is synonymous with flexi-ble modification, easy retrofitting of customer options and application-specific adjustment to site conditions. It is even possible to convert the paver to the offset configuration of the SP 61 / SP 61 i.
12 | INTELLIGENT TRANSPORT CONCEPT
Compact dimensions and minimum modification require-ments ensure ease of loading and cost-effective transport. The paver’s hydraulically operated pivoting legs are a major contributor to reducing the effort required for machine setup on site.
> FOUR-TRACKED PAVER WITH A TREMENDOUS RANGE OF APPLICATIONS
> INSERTION OF DOWEL BARS AND TIE BARS AT AN INSET WORKING WIDTH OF UP TO 6 M
> FOR HIGHEST QUALITY STANDARDS IN SURFACE EVENNESS
> MODULAR DESIGN ENABLES MODIFICATION TO OFFSET CONFIGURATION
Highlights in concrete paving
CONCRETE SLABS WITH CENTRAL CROWN
Concrete slabs can be produced with a central crown of up to 3%.
SUPER SMOOTHERThe oscillating super smoother manufactured from high-quality material ensures a perfect surface finish.
OSCILLATING BEAMThe eccentrically driven
heavy-duty oscillating beam with automatic lifting feature
in case of machine stoppages removes any irregularities in
the concrete surface.
METRIC SLAB PAVING MOULDSConcrete of stiff consistency can be paved to precision using metric inset slab paving moulds of the 910 m or 910 wm series including wearing pan.
SPREADING PLOUGH OR SPREADING AUGERA spreading plough or spreading auger ensures even distribution of the concrete deposited in front of the paving mould.
04 05
HYDRAULIC VIBRATORSThe standard vibrating equipment comprises 12 hydraulic connectors (optionally 18) for hydraulic vibrator drive.
ELECTRIC VIBRATORSDepending on customer requirements, 18 electric connectors (optionally 24) can be installed for electric vibrator drive.
DOWEL BAR INSERTERThe extending dowel bar inserter (DBI) – with optional self-loading feature – integrated in the machine frame inserts the dowel bars in the correct position to prevent uncontrolled cracking of the concrete slab.
SEPARATE HYDRAULIC SIDE TIE BAR INSERTERSThe side tie bar inserters can be mounted on the left, on the right, or on both sides of the machine.
AUTOMATIC LONGITUDINAL JOINT TIE BAR INSERTER Longitudinal joint tie bars are inserted in an automated process to prevent concrete slabs from drifting apart.
CONCRETE SLABS FROM 2.00 M TO 7.50 M
IN WIDTHHigh-precision, high-quali-ty paving of concrete slabs
at widths ranging from 2.00 m to 7.50 m – up to 6.00 m including dowel
bar inserter and electrically driven vibrators.
LAYER THICKNESS OF UP TO 450 MMPaving at layer thicknesses of up to 450 mm – higher thicknesses can be realized on request.
Integrated dowel bar inserter.
Longitudinal joint tie bar inserter. Separate side tie bar inserter.
Highlights in engine technology and operation
ERGONOMIC DESIGNThe ergonomically de-signed operator’s platform improves operator perfor-mance, therefore increas-ing the productivity of the overall machine.
PERFORMANCE-OPTIMIZED ECO MODE ENGINE MANAGEMENT
Automatic adjustment of the engine output to performance requirements ensures high-est engine efficiency, fuel economy and low
noise emission levels.
06 07
ENGINE TECHNOLOGY FOR EU STAGE 3A / US TIER 3The high-powered diesel engine installed in the SP 64 complies with exhaust emission standards EU Stage 3a / US Tier 3.
ENGINE TECHNOLOGY FOR EU STAGE 4 / US TIER 4FThe high-powered diesel engine installed in the SP 64 i complies with the stringent requirements of the currently highest exhaust emission standards EU Stage 4 / US Tier 4f.
HIGH ENGINE POWERThe high-powered engine ensures efficient concrete paving in the optimum performance and torque ranges.
PERFECT VISIBILITYThe spacious operator’s platform provides a perfect view of the paving process.
OPTIONAL FOLD-DOWN CANOPYThe fold-down canopy allows operation to continue regardless of weather conditions.
EASE OF MAINTENANCEReady access to the check points and points of maintenance minimizes maintenance requirements.
STATE-OF-THE-ART CONTROL PANELThe control panel features a state-of-the-art screen and clear, language- neutral symbols to promote productive working.
STANDARDIZED OPERATING CONCEPT
The standardized, self- explanatory operating con-cept in line with the various
new SP model ranges offers additional synergistic effects.
Ergonomically optimized, clearly structured operating concept.
HIGH-QUALITY MACHINE MANAGEMENT SYSTEM
The high-quality machine management system has a large proportion of soft-
ware developed in-house and increases both safety in operation and the range of
applications of the slipform paver.
Highlights in machine control
HIGHLY PRECISE DRIVE MOTOR CONTROL
The highly precise drive motor control prevents
jerky driving even when working at minimum
speed.
08 09
SPEED ADJUSTMENTComputer-controlled speed adjustment of the individual track units enables specifica-tions to be adhered to with pinpoint precision even when paving in bends.
SERVICE DIAGNOSTICS SYSTEMWIDIAG, the service diagnostics system with standardized interface, is used by WIRTGEN service engineers for quick, targeted service diagnostics right on site.
UPGRADABLE CAN-BUS SYSTEMThe existing CAN-bus system can be upgraded.
EFFICIENT WITOS® TELEMATICS SYSTEMThe WIRTGEN WITOS® FleetView telematics system supports fleet manage-ment, machine position and status monitoring, as well as maintenance and diagnostic procedures.
SECOND-TO-NONE SLOPE CONTROL FEATUREThe innovative electronic slope control developed by WIRTGEN results in significantly shorter machine response times which are reflected in perfect paving results.
OPTIONAL INTERFACE FOR 3D CONTROL SYSTEMSThe optional interface creates ideal conditions for the use of state-of-the-art 3D systems in concrete paving. Thorough acceptance procedures verifying the compatibility with 3D control systems of leading suppliers ensure safety of use.
FOUR STEERING MODESFour different steering modes – Back-straight, Crab, Coordinated, Rotate – allow effortless turning and manoeuvring. In addition, the four steering modes facilitate handling of the machine on site.
Different steering modes demonstrated by the SP 64 / SP 64 i.
ADJUSTMENT OF STEERING ANGLE POSITION
With the SP 64 / SP 64 i, the steering angle positions of the
four track units are adjusted fully automatically to optimize
driving behaviour and thus pre-cision in concrete paving.
BACK-STRAIGHT CRAB
COORDINATED ROTATE
Highlights in modular design
TELESCOPING MACHINE FRAMEThe machine frame can be telescoped in
longitudinal and transverse direction to allow full adjustment to site conditions.
RETROFITTING MADE EASYStandard interfaces enable
easy retrofitting of individual customer-specific options.
FULLY MODULAR MACHINE DESIGNThe paver’s fully modular design enables a
wide variety of inset paving applications.
10 11
SELF-LOADING DOWEL BAR INSERTERThe innovative self-loading feature enables machine transport and setup on the construction site without the need for expensive loading cranes.
EASE OF MODIFICATIONEasy modification and
addition of complementary features cater to complex
customer-specific applications.
GETTING READY FOR TRANSPORT QUICKLYThe four pivoting legs (optionally hydraulic) permit not only rapid switching from transport to operating mode but also maximum flexibility for setup of the machine on site.
COMPACT DESIGNExcellent mobility and the paver’s compact design ensure effortless turning and manoeuvring.
ADAPTABILITY TO SITE CONDITIONSThe machine has been engineered to ensure reliable adaptability to site conditions, thus increasing both productivity and the range of applications.
TWO INSET MACHINE MODELSThe four-tracked SP 64 / SP 64 i slipform paver is optionally available as a two-tracked model, the SP 62 / SP 62 i.
Self-loading dowel bar inserter.
PIVOTING TRACK UNITS Track units with large piv-oting angles ensure full ad-justment to site conditions.
12 13
SP 64 SP 64 i
Range of applications
Slab paving applicationPaving width: 2.00 to 7.50 m *1
Layer thickness: up to 450 mm *2
Concrete spreading
Spreading augerSingle-piece auger, modular extension to up to 6.00 m /
Two-piece auger, modular extension to up to 7.50 m
Spreading plough Modular extension to up to 7.50 m
Slab paving equipment
Slab paving mould type 910 m (excluding wearing pan, excluding crown function)
Modular extension to up to 7.50 m
Slab paving mould type 910 wm (including wearing pan, including or excluding crown function)
Modular extension to up to 7.50 m
Dowel bar inserter (DBI) Modular extension to up to 6.00 m
Oscillating beam Modular extension to up to 7.50 m
Super smoother Modular extension to up to 7.50 m
Longitudinal joint tie bar inserter 1
Side tie bar inserter (hydraulic) Right and / or left
Vibrators and circuits
Hydraulic vibration 12 connectors (optional: 18 connectors)
Electric vibration 18 connectors (optional: 24 connectors)
Hydraulically driven vibrators Curved (D66)
Electrically driven vibrators Curved (D76)
Engine
Engine manufacturer Deutz Deutz
Type TCD 2012 L06 2V TCD 6.1 L6
Cooling Water Water
Number of cylinders 6 6
Rated power at 2,300 rpm 155 kW / 208 HP / 211 PS 180 kW / 241 HP / 245 PS
Displacement 6,057 cm3 6,057 cm3
Fuel consumption, full load 42 l / h 46 l / h
Fuel consumption, 2/3 load 17 l / h 18 l / h
Exhaust emission standards EU Stage 3a / US Tier 3 EU Stage 4 / US Tier 4f
Electrical system
Voltage supply 24 V DC
Electric vibration 110V AC 3~ / 200 Hz
Technical specification
*1 = Please note that not all machine configurations are available for the entire working width range; configurations including DBI are available for working widths of up to 6.00 m only; configurations including central crown are available for working widths of 3.50 m or larger only
*2 = Please consult factory for special paving widths, layer thicknesses and optional equipment features*3 = Values within standard transport height; please consult factory for special dimensions*4 = Weights depend on the machine’s range of equipment and paving width
SP 64 SP 64 i
Tank capacities
Fuel tank 400 l 400 l
Adblue® / DEF tank – 32 l
Hydraulic fluid tank, electric vibration 200 l 200 l
Hydraulic fluid tank, hydraulic vibration 400 l 400 l
Water tank 500 l + 500 l 500 l + 500 l
Driving performance
Paving speed B0: 0 to 6 m / min; B1: 0 to 7 m / min
Travel speed B0: 0 to 21 m / min; B1: 0 to 23.50 m / min
Track units
Number 4
Type B0: dimensions (L x W x H) 1,590 x 300 x 570 mm
Type B1: dimensions (L x W x H) 2,040 x 305 x 580 mm
Height adjustment
Hydraulic 1,100 mm / 1,000 mm
Mechanical 420 mm
Central crown
Variable adjustment range For paving widths of 3.50 m to 7.50 m: max. 3 % *3
Transport dimensions (L x W x H)
Paving width 3.50 m: Machine including slab paving mould type 910 m / 910 wm, including spreading plough, oscillating beam and super smoother (excluding guide bar for super smoother)
9,000 x 3,000 x 3,100 mm
Paving width 6.00 m: Machine including slab paving mould type 910 m / 910 wm, including spreading plough, oscillating beam and super smoother (excluding guide bar for super smoother)
11,500 x 3,000 x 3,100 mm
Machine weights
Operating weight, CE (including slab paving mould type 910 m), 3.50 m 19,000 kg *4
Machine weight 17,000 to 45,000 kg *4
14 15
Dimensions
Working direction
Paving situation: slipform paver SP 64 / SP 64 i equipped with spreading auger or spreading plough, slab paving mould type 910 m / 910 wm, oscillating beam and super smoother
B0: 1,590 B1: 2,040
B0: 1,590 B1: 2,040
8,450 (excluding longitudinal joint tie bar inserter) *1
9,150 (including longitudinal joint tie bar inserter) *1
Laye
r th
ickn
ess
+ 4
,100
Laye
r th
ickn
ess
+ 3
,100
1,00
0
B0:
570
B1:
580
B0:
570
B1:
580
Pavi
ng w
idth
+ 4
50
Pavi
ng w
idth
Dimensions in mm*1 = Longitudinal joint tie bar inserter (pivotable) and side tie bar inserter not shown
Working direction
Paving situation: slipform paver SP 64 / SP 64 i equipped with spreading auger or spreading plough, slab paving mould type 910 m / 910 wm, dowel bar inserter (DBI), oscillating beam and super smoother
B0: 1,590 B1: 2,040
B0: 1,590 B1: 2,040
Laye
r th
ickn
ess
+ 4
,100
Laye
r th
ickn
ess
+ 3
,100
1,00
0
B0:
570
B1:
580
B0:
570
B1:
580
Pavi
ng w
idth
+ 4
50
Pavi
ng w
idth
10,500 *2
Dimensions in mm*2 = Applies to standard longitudinal joint tie bar inserter (non-pivotable)
16 17
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
Standard equipment features
SP 64 SP 64 i
Basic machine
Basic machine comprising engine station and chassis, telescoping to the left and right mechanically for the installation of slab paving moulds between the track units and including pre-fitting for four track units
Fuel tank, 400 litres
Electrical system (24 V)
Cooling system with temperature-controlled fan speed
Hydraulic system including an adequately sized hydraulic fluid tank and a pump transfer gearbox with two output shafts and the pumps required for the machine’s basic equipment package
Main frame and height adjustment
Hard-wearing steel frame which can be telescoped, in increments, by 750 mm to either side and optionally extended using fixed extension elements
The chassis is pre-fitted with multiple attachment points for the modular addition of a variety of equipment features
Concrete paving equipment ranging from 2.00 m to 4.00 m in width can be connected to the machine frame; optional extension to working widths of up to 7.50 m (depending on the machine’s range of equipment; up to 6.00 m with DBI)
Chassis elements for mechanical telescoping in increments to achieve working widths of up to 4.00 m
Track system and connection of track units
Paving speed of B0 track unit: 0 to 6 m / min
Transport speed of B0 track unit: 0 to 21 m / min
Cylinder steering system for model with four B0 track units
Model with four B0 track units (four rollers), fitted with triple-grouser steel track pads
Model with two manually pivotable track connections each, front and rear
Machine control and levelling and steering
WI-CONTROL: high-quality control system ensuring perfect interaction between all machine features
Malfunction reports are displayed on the machine’s control screen
The existing CAN-bus system can be upgraded to customer specifications
ECO mode: performance-optimized engine management for reduced diesel consumption and low noise emission levels
Electrohydraulic proportional levelling and steering by means of a PLC system including four levelling sensors and two steering sensors
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
SP 64 SP 64 i
Machine control and levelling and steering
Sensor mountings adjustable in both height and range
An electronic slope sensor enables concrete to be paved at working widths of 4.00 m using a stringline on only one side
Four hydraulic levelling cylinders with a stroke of 1.00 m / 1.10 m
Vibration
Hydraulic vibrator drive for max. 12 vibrators
10x curved vibrators D66, hydraulically driven
Concrete equipment for slab paving
Slab paving mould of the 910 m series without crown function – basic width 3.50 m, including trailing side header extension 260 mm and trailing side header with transverse connection (minimum 2.00 m)
Single-piece sideplate for slab paving mould series 910 m / 910 wm
Operator’s platform
Ergonomically designed operator’s platform providing a perfect view of the paving process
Two control panels with clear, language-independent symbols for ergonomic operation
Control panel No. 1 for machine setup in line with field requirements
Control panel No. 2 with multifunctional control screen which provides the operator with the required ma-chine parameters and allows settings to be made via a menu. It can be adjusted to all directions of travel and paving configurations.
One control panel can be stored in the engine compartment. The second control panel can be protected against vandalism and weather using lockable covers.
Automated recognition of the specific machine configuration makes orientation simple for the machine operator
Miscellaneous
Comprehensive toolkit in lockable toolbox
Comprehensive safety package with EMERGENCY STOP switches
Machine hydraulics filled with mineral hydraulic oil
Standard painting in RAL 9001 (cream)
Lighting package including 4 halogen working lights, 24 V
18 19
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
Optional equipment features
SP 64 SP 64 i
Main frame and height adjustment
Chassis elements for continuous hydraulic telescoping to achieve working widths of up to 6.00 m
Concrete spreading equipment for slab paving
Spreading auger without crown function – basic width 3.50 m (minimum 2.00 m)
Split spreading auger with or without crown function – basic width 3.50 m
Spreading auger – extension element 0.25 m, right-handed
Spreading auger – extension element 0.50 m, right-handed
Spreading auger – extension element 0.75 m, right-handed
Spreading auger – extension element 1.00 m, right-handed
Spreading auger – extension element 0.25 m, left-handed
Spreading auger – extension element 0.50 m, left-handed
Spreading auger – extension element 0.75 m, left-handed
Spreading auger – extension element 1.00 m, left-handed
Spreading plough – basic width 3.50 m (minimum 3.00 m)
Spreading plough – extension element 0.25 m
Spreading plough – extension element 0.50 m
Spreading plough – extension element 0.75 m
Spreading plough – extension element 1.00 m
Track system and connection of track units
Cylinder steering system for model with four B1 track units
Model with four B0 track units (four rollers), fitted with polyurethane track pads
Model with four B1 track units (six rollers), fitted with triple-grouser steel track pads
Model with four B1 track units (six rollers), fitted with polyurethane track pads
Model with two hydraulically pivotable track connections each, front and rear
Walkway extension on the left side of the machine, including handrails and access ladder. Allows crossing of the construction site via the machine. Includes the extension elements required for use with working widths ranging from 4.75 m to 6.00 m.
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
SP 64 SP 64 i
Machine control and levelling and steering
Slab tracer, 2 units
Slab tracer, 4 units
Control panel for manual steering of the track system
Pre-fitting for 3D levelling
Vibration
Hydraulic vibrator drive for max. 18 vibrators
Straight vibrator D66, hydraulically driven
Curved vibrator D66, hydraulically driven
Electric vibrator drive including 40-kVA generator for max. 18 vibrators
10x curved vibrators D76, electrically driven
Straight vibrator D66, electrically driven
Curved vibrator D76, electrically driven
Concrete equipment for slab paving
Metering screed for slab paving mould without crown function – basic width 3.50 m (minimum 2.00 m)
Split metering screed for slab paving mould with or without crown function – basic width 3.50 m
Automatic metering screed control for concrete slab paving mould
Metering screed – extension element 0.25 m
Metering screed – extension element 0.50 m
Metering screed – extension element 0.75 m
Metering screed – extension element 1.00 m
Slab paving mould of the 910 wm series without crown function – basic width 3.50 m, including trailing side header extension 260 mm and trailing side header with transverse connection (minimum 2.00 m)
Slab paving mould of the 910 wm series with or without crown function – basic width 3.50 m, including trailing side header extension 260 mm and trailing side header with transverse connection
Slab paving mould series 900 m / 910 m – extension element 0.25 m wide
Slab paving mould series 910 m – extension element 0.50 m wide
20 21
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
Optional equipment features
SP 64 SP 64 i
Concrete equipment for slab paving
Slab paving mould series 910 m – extension element 0.75 m wide
Slab paving mould series 910 m – extension element 1.00 m wide
Slab paving mould series 910 wm – extension element 0.25 m wide
Slab paving mould series 910 wm – extension element 0.50 m wide
Slab paving mould series 910 wm – extension element 0.75 m wide
Slab paving mould series 910 wm – extension element 1.00 m wide
Two-piece sideplate for the production of construction joints with the 910 m / 910 wm series slab paving mould
Longitudinal joint tie bar inserter for tie bars ø 12 – 25 mm, length 400 – 800 mm
Model with mounting components for attachment of a longitudinal joint tie bar inserter to the slab paving mould
Model with mounting components for attachment of a longitudinal joint tie bar inserter to the dowel bar inserter
Model with mounting components for optional attachment of a longitudinal joint tie bar inserter to the slab paving mould or dowel bar inserter
Electric control system for dowel bar inserter (DBI) and longitudinal joint tie bar inserter + chassis extension for dowel bar inserter (DBI)
Automatic dowel bar inserter (DBI) for use without crown function – basic width 3.50 m (minimum 2.50 m)
Automatic dowel bar inserter (DBI) for use with crown function – basic width 3.50 m
Floor assembly for dowel bar inserter (DBI) for paving widths of up to 3.50 m
Floor assembly for dowel bar inserter (DBI) for paving widths of up to 4.00 m
Floor assembly for dowel bar inserter (DBI) for paving widths of up to 5.00 m
Floor assembly for dowel bar inserter (DBI) for paving widths of up to 6.00 m
Dowel bar inserter (DBI) – extension element 0.25 m
Dowel bar inserter (DBI) – extension element 0.50 m
Dowel bar inserter (DBI) – extension element 0.75 m
Dowel bar inserter (DBI) – extension element 1.00 m
Load blocks as modification aid for altering the width of the dowel bar inserter (DBI)
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
SP 64 SP 64 i
Concrete equipment for slab paving
Self-loading feature for DBI including diesel-powered hydraulic power pack
Transport frame for oscillating beam and super smoother as transport unit
Oscillating beam without crown function – basic width 3.50 m (minimum 2.00 m)
Oscillating beam with or without crown function – basic width 3.50 m
Oscillating beam – extension element 0.25 m
Oscillating beam – extension element 0.50 m
Oscillating beam – extension element 0.75 m
Oscillating beam – extension element 1.00 m
Super smoother – basic width 3.50 m (minimum 2.00 m)
Super smoother – extension element 0.25 m
Super smoother – extension element 0.50 m
Super smoother – extension element 0.75 m
Super smoother – extension element 1.00 m
Super smoother – extension element 2.00 m
One side tie bar inserter for straight tie bars, max. ø 20 mm, length 800 mm
Two side tie bar inserters for straight tie bars, max. ø 20 mm, length 800 mm
Concrete equipment for offset paving
One set of hydraulic components for adjusting the sideplate of a European-type offset paving mould
One set of hydraulic components for adjusting the sideplate of an American-type offset paving mould
Rigid suspension for offset paving mould
Offset paving mould up to 0.60 m wide, max. height of 0.40 m (see form TEI#2170960)
Offset paving mould from 0.60 m to 1.20 m wide, max. height of 0.40 m (see form TEI#2170960)
Offset paving mould from 1.20 m to 1.80 m wide, max. height of 0.40 m (see form TEI#2170960)
Offset paving mould up to 0.90 m high, max. base width of 0.60 m, including hopper (see form TEI#2170960)
22 23
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
Optional equipment features
SP 64 SP 64 i
Concrete equipment for offset paving
Offset paving mould up to 1.20 m high, max. base width of 0.60 m, including hopper (see form TEI#2170960)
Split offset paving mould up to 0.60 m wide, max. height of 0.40 m (see form TEI#2170960)
Split offset paving mould from 0.60 m to 1.20 m wide, max. height of 0.40 m (see form TEI#2170960)
Bottom part for split offset paving mould up to 0.60 m wide (max. height 0.40 m)
Bottom part for split offset paving mould from 0.60 m to 1.20 m wide (max. height 0.40 m)
Concrete feeding system
Belt conveyor 5.90 m x 0.60 m with reversible hydraulic drive, hydraulically adjustable
Belt conveyor 6.00 m x 0.60 m in folding design with reversible hydraulic drive, hydraulically adjustable
Auger conveyor 4.60 m x 0.40 m with reversible hydraulic drive, hydraulically adjustable
Auger conveyor 5.70 m x 0.40 m with reversible hydraulic drive, hydraulically adjustable
Steel chute
Steel-rubber chute
Operator’s platform
Canopy for operator’s platform, foldable manually
Miscellaneous
Painting in one special colour (RAL)
Painting in two special colours (RAL)
Painting in maximum two special colours with the lower part painted in special colour (RAL)
High-performance lighting package including 8 LED working lights, 24 V
Hydraulic high-pressure water cleaning system, 500-litre steel tank
Additional electrical water pump 24 V including 10-m hose and spray gun with handle
Additional water tank providing additional 500 litres of water
Self-levelling feature for transport mode
Halogen rotating beacon 24 V including magnetic base
SP 64 SP 64 i
Miscellaneous
Flashing beacon 24 V including magnetic base
Paving Plus package
Additional control panel for track system adjustment
WITOS® FleetView telematics system including 3-year licence (EU) –WITOS® FleetView telematics system including 3-year licence – PROMOTION –WITOS® FleetView telematics system including 3-year licence (non-EU) –Two lighting balloons, 230 V, including power generator
Two lighting balloons, 110 V, including power generator
High-performance lighting package including 4 LED working lights, 24 V, for illuminating the compaction zone
Crane system for dowel bar packs, chain drive
Crane system, hydraulic drive
Wire tensioning system, complete with 1,000 m wire rope
Second tensioning winch for levelling the machine via two wire ropes
Wire tensioning system, complete with 4 x 300 m nylon rope
Radius paving kit, fibre-glass rod as replacement for the stringline when paving corners of different radii
Daily rate for machine start-up
Export packaging
= Standard equipment = Standard equipment, replaceable with optional equipment = Optional equipment
All details, illustrations and texts are non-binding and may include optional additional fittings. Subject to technical modifications. Performance data dependant upon operational conditions. No. 2579926 EN-04/18 © WIRTGEN GmbH 2018. Printed in Germany.
WIRTGEN GmbHReinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-392Internet: www.wirtgen.com · E-Mail: [email protected]
Top Related