Module Four: Reflection - Student JournalVirtual Environments (ENVS 10008)
Catherine Mei Min Woo562729Semester 2/2012Group 13
IdeationDeath
What is death?Is death a looming shadow?
Or a process of enlightenment?
How do forms and contextx (of use and resources) influence each other?
In the exploration of the selected theme in relation to the brief presented [namely the theme of Death in rela-tion to the creation of a wearable lantern], the form and context of which the project is based on greatly influ-enced each others development, resulting in the selected focus features: curvature, headpiece and shadows.
IdeationDeathHow do forms and contextx (of use and resources) influence each
other?
Natural Process
Figure 1.1
Figure 1.2
Figure 2.1 Figure 2.3Figure 2.2
Curvature
Death occurs when a living organism/cell permanently terminates the biological
functions that sustain the living organism
The process whereby biological changes occur after reaching maturity is known as
senescence/biological aging
Structural rigidity of plants reduce and cause them to appear limp/wilt due to
structural changes caused by aging
Humans experience the same structural changes to their bone and muscle struc-
ture
When an organism dies and lose struc-tural control, gravity pulls them towards the earths surface, forcing cantileveing
organisms to ‘bend’ downwards
Figure 1.1-1.2: Diagram of a wilting plant and the curvature that is found to exist in the organisms death, which is also seen in Figure 2.1-2.3: whereby the same pattern exists in other organisms eg. Humans.
IdeationDeathHow do forms and contextx (of use and resources) influence each
other?
Natural ProcessHeadpiece
Inspired by the psychological ties con-nected to the process of death and the physical curvature of dead/dying organ-
isms
Death can be perceived as a looming shadow and unavoidable, hence omi-
nous and threatening
The idea of shadows brings about in-teresting pattern centric possibilities for
shadowing of the headpiece
Death can also be precieved as the last stage of mortal enlightenment, hence ties
into the lantern concept
By adapting the curvature to the head-piece, traditional headpieces eg. hats
can be reinterpreted into more elaborate designs and patterns for this task
Figure 3.1
Figure 4.1
Figure 5.1 Figure 5.3Figure 5.2
Figure 5.1-5.3: Examples of how the curvature can be adapted into the headpiece as inspired from the headpieces as pictured on the left
Figure 4.1: indicates how the curvature can be reinterpreted as a “looming” or cantelivering structure, which allows the posibilitiy of creating “looming shadows” to tie in with the theme while creating opportunities for pattern implication
Figure 3.1: Illustrates the difference in psychological perception towards the process of death. Both are contrasting as one can be considered a “looming/ominous” event that is physically represent-ed as a shadow whereas it can also be uplifting and bright, like a lantern
IdeationDeathHow do forms and contextx (of use and resources) influence each
other?
Natural processHeadpiece
Inspired by the psychological ties con-nected to the process of death and the physical curvature of dead/dying organ-
isms
Furthering the idea of “looming”, the affects of the shadows cast upon by the proposed sketch models successful cre-
ate the desired outcome
Furthering the idea of “enlightenment”, integration of LED lights into the design would create interesting results after in-
corporating patterns
By adapting the curvature to the head-piece, traditional headpieces eg. hats
can be reinterpreted into more elaborate designs and patterns for this task
Figure 3.1
Figure 4.1
Figure 5.1 Figure 5.3Figure 5.2
Figure 5.1-5.3: Examples of how the curvature can be adapted into the headpiece as inspired from the headpieces as pictured on the left
Figure 4.1: indicates how the curvature can be reinterpreted as a “looming” or cantelivering structure, which allows the posibilitiy of creating “looming shadows” to tie in with the theme while creating opportunities for pattern implication
Figure 3.1: Sketch models displaying two sketch designs
IdeationDeathHow do forms and contextx (of use and resources) influence each
other?
Natural Process
Figure 1.1
Figure 1.2
Figure 2.1 Figure 2.3Figure 2.2
Pattern
The curvature of dead/dying organisms is the primary structure that makes up the
design by this theme
The basic composition of the structure would focus on capturing the curvature
of a dead/dying organism
The pattern is further derived from dead/dying organisms through the analysis of
decomposition of organic matter
Principles of paneling suggest creating seemingly random patterns through a sys-tematic process, may be able to success-fully translate the desired pattern onto the
design
Precedents include decaying organic matter as well as facade mesh/screen
patterns found in contemporary architec-ture in locations such as Pittsburgh
Figure 1.1-1.2: Images of existing architectural structures that make use of patterns Figure 2.1-2.3: further examples of decaying organisms and the patterns created
DesignDeathHow do different media support different kinds of design inquiries
and refinement?
In the experimentation process of the design, many different variations were created to not only suit the form that was desired but primarily the function of the desired product. The emphasis was generated not only to strike a balance between the potential form and function of the envisioned product, but to ultimately push the boundaries of the design outcome with limited resources, knowl-edge and material. Questions of suitability of the design in terms of relevance in regards to the brief was taken into consideration to
provide a sort of design parameter, ensuring a more focused area of thought.Through experimentation of both forms and shadow play, many different manners of approahing the design were critiqued and refined based on ability to fabricate [due to limited
knowledge in software and craftmenship] as well as appropriately answering the brief, which was to create a wearable lantern. The choice of creating a headpiece provided a parameter that spanned the head region of the body, providing a smaller area
the work with. To experiment with the design in this region, clay prototypes were used on a wooden model and altered and refined to create the basic form of the design.
DesignDeathHow do different media support different kinds of design inquiries
and refinement?
Experimentation: FormForm
Design 1
Design 2
The design began from a more floral approach , similar to that of the precedents presented in the Ideation module, but gradually developed into less realistic forms that car-
ried traits of plan components eg. petals that identify with the design focus in terms of form and structure
DesignDeathHow do different media support different kinds of design inquiries
and refinement?
Experimentation: Forms & ShadowsForm & Shadows
The prototypes also played with shadows to emphasize the idea of looming & enlighten-ment is possible with various designs, as well
as the projection of light to emphasize physi-cal traits of decomposition
Design 3 Design 4
Shadows on various surfaces, with different light source direction and projections
DesignDeathHow do different media support different kinds of design inquiries
and refinement?
Precidents: Pattern
Rovi Lau Sem 1 2012
Decaying leaf shadowExisting light shadowing
Physalis alkekengi
The patterns selected were further derived during the Ideation com-
ponent of the project, expanding from the theme of Death and out-
lining the occurrence of decom-position, hence a wide spread yet
detailed and seemingly random patterns were selected that occur
in nature and how such projections were translated into existing forms
such as lamps
DesignDeathHow do different media support different kinds of design inquiries
and refinement?
Headpiece
Design 1: Sketches and clay model
Design 2: Inspired by previously proposed design, and intergrat-ed into the second design
Experimentation: Form
Final design for the basic form of the struc-ture, notably shaped due to the experi-
mentations prior to it’s final outcome and further refined to create a more stream
lined and sophisticated structure that would be further developed into a solid
structure as opposed to the initially desired whimsical, bodiless structure.
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
The most tedious and tiresome component of the project would be the fabrication module, or more specifically, digitization and optimization of the design. This was particularly difficult due to the lack of familiarity with the software and having to try to
understand the parameters and language of which the software is designed to create optimum results. The Rhino software, undoubtably streamlined the process once mastered, proved a challenging learning curve in the face of deadlines and ideas
vs the software capability of translating the idea into the software for processing. As mentioned in the lectures weeks 5-11, the readings and lectures emphasize time and time again the significance of such technological development in the changing
manner of which design is presented and created. However, such man made devices prove to be a useful tool, not a designer, as the creativity and imagination of which designs are derived are still limited to human ingenuity . Furthermore, being provided
with a software sets parameters and limitations that span the design of the software to the designers understanding and abili-ty to use such a software, as experienced repeatedly during the digitization process. Not only are physical traits such as scale
and form limited by such software. the material used needs to be taken into consideration as well. The material criteria includes ivory white or black 200gsm card, black 300gsm card or white mount board, hence made a challenging process as the desired outcome was of an organic shape. To create the illusion of such a shape, the Rhino software proved useful in generating panels
through triangles to create the illusion of such curvature throughout the structure while remaining to scale and true to the origi-nal form.
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
Paper Prototypes
Wire mesh prototype
Paper prototype: simplified for panelling
Initial prototypes created after the clay prototypes were completed, attempted to scale and divided for fabrication and
translation.
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
Rendered model as seen from orthographic views. The models are contrasted with white and black backgrounds respectively for varied emphaiss of curvature and structure under different circumstances.
Digitizaition trials to create basic shape
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
After many trial and errors, the perspective of the basic shape of the model was finally digi-tized, as pictured in the picture on the left.
The design was eventually broken down into it’s basic contures and railed in Rhino and result-ing in this final outcome. A combination of contouring methods, essentially the hybrid of all 3 methods outlined by the tutorials as well as assistance from tutors, the design was eventually translated, whilst retaining the key features of the design:
The idea of death as a ‘looming’ yet ‘enlightening concept, the abiility to cast shadows/shadow play as well as the physical curvature of dead or dying organisms.
The exterior design was intended to have made use of 2D paneling, as to emphasize on the idea of creating shadows from the interor 3D paneling while retaining the sense of a ‘looming structure’.
A simple pyramid 2D paneling was applied onto the surface to produce the image on the left.
Finalized perspectives & nesting
Below is the optimzed nest-ing layout sent for printing at the Fab Lab
The exterior was sent for printing first to ensure the support/exterior dimentions were accurate as advised by Michelle in the Tutorial 9.
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
Completed full scale prototype
Version one of the exterior of the model completed as seen in the picture on the left.
Transportation of a model this scale will be complicated as the only modes of transportation available are public trans-port and a small car.
The solution would be to reduce the scale of the model.
With the scale reduced, the number of paneling should also be reduced to make construction easier.
As for the cone structures (eg.wings 1 and 2) to make fabrication easier, will be reconstructed into whole cones to pre-vent odd and uneven joints occurring.
The tabs will also be enlarged for the sake of convenience as an increase to about 1cm will not interfere with the path of light, and in-fact could be good for mounting of the LEDs.
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
Assembly & PanelingManual assembly of the respective sections after printing and laser cutting the score and cut lines us-ing the Grasshopper Plug-in in Rhino. UHU glue being the main adhesive as well as cellophane tape. The panelling was also exper-imented on but the laser printing was rendered un-usable due to the material not being strong enough to sustain such detail without collapsing hence was also done manually [measure-ment and cutting].
FabricationDeathHow do different kinds of fabrication technologies make possible
as well as constrain what can be constructed?
Completed model
Completed model as seen in perspective and as seen during the Virtual Environments Lantern Parade in October 2012 (photo credit to Rovi Lau 2012).
ReflectionDeathHow do representations and their material realisations (or insights)
may be mutually dependent?
What are the learning outcomes of this subject and its relevance to your further studies and future?
Theories presented through the lectures and readings such as Ball (2012), Poling (1987), Ching (1990) and Yee (1997) provided separate but interconnected theories and introduced precedents that exist readily in nature and are adapted into struc-tures and technology to be utilized by humans. Ball (2012) discussed the idea of “self-organization” in nature through natural processes, such as adaptation through naturally occurring environmental constrains and opportunities. Upon reflecting the importance of mathematics and logical thinking in the design of structures, Kandisky (poling 1987) approached design derived from the principles of logic and mathe-matical calculations. Additionally, Ching (1990) and Yee (1997) provide informative insight into orthography, hence streamlining implementation into the student journal. the Rhino and InDesign tutorials have been helpful to a certain extent for further research and comparison of usage techniques, online and offline, have generated greater insight into full utilization of the programs.
Other theories presented through the lectures and readings such as the lecture de-livered by Alex Selenitsch about form and matter was very engaging, as he focused on the importance of composition, the idea of form and matter, as well as how to combine existing elements to create something new. The reading by Scheurer and Stehling (2011) was more inclined towards exploring the relationship between mathematics and computation, and the process and break down of how computa-tional programs can be used to materialize design. Upon reflecting the importance of material and computation in the design of structures, Fleischmann et al. (2012) approached design derived from the principles of the marriage of these two seem-ingly separate concepts of computerization from week 3, composition in Week 4, and how they combine to become an entirely separate entity that embodies all 3 of these aspects of design.
In week 7, Paul Loh (2012) explored the idea of “the Power of Making” as a problem solving method that focuses on creation through design. Similarly, the reading by Macfarlane (2005) explores the relationship of digital evolution over recent years
ReflectionDeathHow do representations and their material realisations (or insights)
may be mutually dependent?
What are the learning outcomes of this subject and its relevance to your further studies and future?
with the creative process. Both address the significance of creation and how tech-nology aids and expands this process. In week 8, Stanislav Roudavski (2012) expand-ed on the relation between technology and the creative process that was ad-dressed in week 7 by focusing on this relationship with the profession of architecture and how communicating ideas with other faculties is more streamlined due to this technological development and adaptation into the industry. Additionally, Gershen-feld (2005) however, focuses on the more technical aspects of design and custom-ization through expanding the fabrication techniques outlined last week (addition and subtraction) as well as the significance of model construction. In week 9, Bharat (2012) delivered our last lecture about our prospects in pursuing Rhino or even other modeling softwares in the future. As professions in the developing world transcends more and more, professions such as engineering and architecture make use of such softwares, similar to streamlining the process of product design and manufacturing. For our final readings, Mitchell (2000) elaborates the growing significance of the inter-net and the online community while questioning it’s presence in our futures.
The lectures ended on a rather bittersweet note as the virtual lectures are the most interesting lectures of all the courses I am currently enrolled in and they have assisted me greatly in motivating me to work towards familiarizing myself with the software, Rhino. The constant emphasis of technology in design greatly streamlines the pro-cess and assists greatly in the fabrication process, however mastery of the software is required to achieve such ease. Therefore, through the understanding of the signifi-cance of these concepts has drawn emphasis from abstract design to physical ma-terialization of the model, and hence driven further interaction and practice towards mastering Rhino as a tool for this process to go through.
The representations of the initial prototype models made of modeling clay , wire mesh and paper varied tremendously in comparison with the ivory white card that was used for the final model. As the use of materials changed, all of which embod-ied different elements of the desired design. The clay embodied the curvature and
ReflectionDeathHow do representations and their material realisations (or insights)
may be mutually dependent?
What are the learning outcomes of this subject and its relevance to your further studies and future?
the shadowing effect required of the design but only represented the idea of a headpiece sans lantern whereas the wire mesh only represented the curvature of the design. The wire mesh was then translated into paper for segmentation and hence only representative of the shapes but not a solid prototype of the lantern. The completed prototype using the actual material was then analyzed for pro and con factors, which included the scaling of the tabs, size of paneling, and overall scale of the model. Without the representation and experimentation of the initial designs, it would not have been possible to produce the final design, and were important learning curves to overcome and refine the design.
References: Projective GeometryChing, Francis D. K. (1990): Basic Orthographic Methods. In Drawing- A Creative Process, Van Nostrand Reinold, pp. 146-159
Yee, Rendow (1997): Conventional Orthographic Terminology. In Architectural Drawing- A Visual Compendium of Types and Methods, John Wiley & Sons, pp. 41-63
IdeationBall, Philip (2012): Pattern Formation in Nature, AD: Architectural Design, Wiley, 82 (2), March, pp. 22-27
Poling, Clark (1987): Analytical Drawing. In Kandisky’s Teaching at the Bauhaus, Rizzoli, New York, pp. 107-132
DesignScheurer, F. and Stehling, H. (2011): Lost in Parameter Space? IAD: Architectural Design, Wiley, 81 (4), July, pp. 70-79
Fleischmann, M., Knippers, J., Lienhard, J., Menges, A., and Schleicher, S. (2012): Material Behaviour: Embedding Physical Properties in Compu-tational Design Processes, D:Architectural Design, Wiley, 82 (2), March, pp. 44-51
FabricationMacfarlane, B. (2005): Making Ideas. In Architecture in the Digital Age, B. Kolarevic (ed.), Spon Press, London, pp. 182-197
Gershenfeld, Neil (2005): Subtraction; Addition; Building Models. In FAB: The Coming Revolution on Your Desktop--From Personal Computers to Personal Fabrication, Basic Books, pp. 67-76; 93-101; 103-113
ReflectionMitchell, W. (2000): Software: New Genius of Place. In e-Topia, MIT Press, Cambridge, MA, p. 42-68
Mitchell, W. (2000): Replacing Place. In The Digital Dialectic, P. Lunenfeld (ed.), MIT Press, Cambridge, MA, p. 112-127
Top Related