S P E C I A L I S T I N F I R E S A F E T Y P R O D U C T S
PRODUCT GUIDE
SP
EC
IAL
IST
IN F
IRE
SA
FE
TY
PR
OD
UC
TS
MegaFire’s compact 1.0KG extinguisher specifi cally is the perfect compromise between size and power to have around for that emergency fi re.
Megafi re’s ABE dry powder extinguisher is suitable for most fi re hazards that take place in and around the home or vehicle including fi res with a live electrical source.As electricity may pose a signifi cant secondary hazard, always ensure power is isolated before extinguishing a stove top fi re.
This dry chemical power extinguisher is also suitable for fi res involving all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment making it perfect for caravans, homes, vehicles and small garages.
1.0KG MEGAFIRE ABERATING 1A:20B:E
PIRTEK ITEM CODE: ME11ABE
AGENT CAPACITY: 1.0KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1000KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
FERN NO: 25668-DC-6321
DISCHARGE TIME: 8 SECONDS
NOZZLE SIZE: 3.6MM
NET MASS: 1.0KG
GROSS MASS CHARGED: 1.8KG
WITDH: 90MM
HEIGHT: 265MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: METAL RED FINISH
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
MegaFire’s 1.5KG extinguisher is
targeted at the home and leisure
user. Typical applications for this
extinguisher would be caravans,
boats, homes, small garages and
workshops.
Fires origninating from any of the
above locations can quickly get out of
control, so with the more punch 1.5KG
model, this extinguisher is the perfect
combination between power and size
to knock down all potential fi re quickly
before damaging any equipment.
This 1.5KG dry chemical power
extinguisher is a competant all rounder
and is suitable for fi res involving all paper,
textiles, wood, plastics, rubber, petrol,
oil, paints, LPG, CNG, Acetylene and
electrically charged equipment, all of
which could be found around the house
or within any of your leisure locations or
equipment.
1.5KG MEGAFIRE ABERATING 2A:20B:E
PIRTEK ITEM CODE: ME15ABE
AGENT CAPACITY: 1.5KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
FERN NO: 25668-DA-6319
DISCHARGE TIME: 12 SECONDS
NOZZLE SIZE: 3.2MM
NET MASS: 1.5KG
GROSS MASS CHARGED: 3.2KG
WITDH: 100MM
HEIGHT: 380MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
MegaFire’s 1.5KG extinguisher is
targeted at the home and leisure
user. Typical applications for this
extinguisher would be caravans,
boats, homes, small garages and
workshops.
Fires origninating from any of the
above locations can quickly get out of
control, so with the more punch 1.5KG
model, this extinguisher is the perfect
combination between power and size
to knock down all potential fi re quickly
before damaging any equipment.
This 1.5KG dry chemical power
extinguisher is a competant all rounder
and is suitable for fi res involving all paper,
textiles, wood, plastics, rubber, petrol,
oil, paints, LPG, CNG, Acetylene and
electrically charged equipment, all of
which could be found around the house
or within any of your leisure locations or
equipment.
SP
EC
IAL
IST
IN
FIR
E S
AF
ET
Y P
RO
DU
CT
S
SP
EC
IAL
IST
IN F
IRE
SA
FE
TY
PR
OD
UC
TS
Fires in garages and workshops are a serious matter. The typical garage or workshop contains a host of fl ammable materials, from liquids such as petroleum and paint thinner to wood, sawdust and greasy rags.
Garages and workshops also contain heat sources such as water heaters and furnaces that can ignite a fi re.MegaFire’s 2.0KG all purpose ABE dry chemical power portable fi re extinguisher fi ts right into this category for the best protection possible.This extinguisher comes with a vehicle bracket for your car, truck or boat.
When you cut or sand wood, you create sawdust and wood chips. These small pieces of wood are much more combustible than larger boards. Sweep them up right away and you will eliminate a big source of workshop fi res.
2.0KG MEGAFIRE ABERATING 3A:30B:E
PIRTEK ITEM CODE: ME20ABE
AGENT CAPACITY: 2.0KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
FERN NO: 25668-DA-6305
DISCHARGE TIME: 11.3 SECONDS
NOZZLE SIZE: 3.8MM
NET MASS: 2.0KG
GROSS MASS CHARGED: 3.9KG
WITDH: 110MM
HEIGHT: 420MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
MegaFire’s 2.5KG ABE offers higher rating and a greater knock down over larger areas such as a small offi ces or home lounge spaces.
Offi ces have general fi re risks from things such as desks, chairs and waste paper bins but will also contain electrical equipment.
The dry chemical power makes this type of extinguisher safe and perfect to use around live electrical equipment as well as for fi res involving all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment. With more extinguishing power and longer discharge time, you can be confi dent having this extinguisher around your home or offi ce having the ability to fi ght the potential danger.
2.5KG MEGAFIRE ABERATING 1A:20B:E
PIRTEK ITEM CODE: ME25ABE
AGENT CAPACITY: 2.5KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
FERN NO: 25668-DA-6309
DISCHARGE TIME: 14.3 SECONDS
NOZZLE SIZE: 3.2MM
NET MASS: 2.5KG
GROSS MASS CHARGED: 4.9KG
WITDH: 130MM
HEIGHT: 445MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
SP
EC
IAL
IST
IN
FIR
E S
AF
ET
Y P
RO
DU
CT
S
SP
EC
IAL
IST
IN F
IRE
SA
FE
TY
PR
OD
UC
TS
4.5KG MEGAFIRE ABERATING 4A:60B:E
PIRTEK ITEM CODE: ME45ABE
AGENT CAPACITY: 4.5KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
FERN NO: 20621 - DA - 6311
DISCHARGE TIME: 19 SECONDS
NOZZLE SIZE: 2.0MM
NET MASS: 4.5KG
GROSS MASS CHARGED: 7.8KG
WITDH: 145MM
HEIGHT: 560MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
MegaFire’s 4.5KG ABE is suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, it could be said that the ABE Powder Type extinguisher is the most widely used.
It is important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fi ne powder is discharged that may cause specifi c concerns or damage.
Note: Vehicle mounting brackets are also available.
Supplied with wall mounting bracket as standard.
MegaFire’s 4.5KG ABE is suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, it could be said that the ABE Powder Type extinguisher is the most widely used.
It is important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fi ne powder is discharged that may cause specifi c
Vehicle mounting brackets are also available.
9.0KG MEGAFIRE ABERATING 6A:80B:E
PIRTEK ITEM CODE: ME9ABE
AGENT CAPACITY: 9.0KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
FERN NO: 20621 - DA - 6315
DISCHARGE TIME:
NOZZLE SIZE: 6.0MM
NET MASS: 9.0KG
GROSS MASS CHARGED: 13.9KG
WITDH: 185MM
HEIGHT: 620MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
MegaFire’s 9.0KG ABE is suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, it could be said that the ABE Powder Type extinguisher is the most widely used.
It is important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fi ne powder is discharged that may cause specifi c concerns or damage.
Note: Vehicle mounting brackets are also available.
Supplied with wall mounting bracket as standard.
MegaFire’s 9.0KG ABE is suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, LPG, CNG, Acetylene and electrically charged equipment, it could be said that the ABE Powder Type extinguisher is the most widely used.
It is important to remember that when using this Dry Chemical Powder (DCP) extinguisher, consideration must be made in relation to the location and usage of this product as a fi ne powder is discharged that may cause specifi c concerns or damage.
Note: Vehicle mounting brackets are also available.
Supplied with wall mounting bracket as standard.
SP
EC
IAL
IST
IN
FIR
E S
AF
ET
Y P
RO
DU
CT
S
SP
EC
IAL
IST
IN F
IRE
SA
FE
TY
PR
OD
UC
TS
4.5KG MEGAFIRE HPRATING 4A:80B:E
HIGH PERFORMANCEHEAVY DUTYThese MegaFire High Performance
Fire Extinguishers have an
extra heavy duty valve, thicker
cylinder steel, more robust base,
higher percentage of powder and
designed for tough conditions
typically experienced in mining
and heavy construction vehicles
and equipment.
Note: Vehicle mounting brackets are also available.
Supplied with wall mounting bracket as standard.
PIRTEK ITEM CODE: ME45ABEM
AGENT CAPACITY: 4.5KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
DISCHARGE TIME: 22 SECONDS
NOZZLE SIZE: 4.0MM
NET MASS: 4.5KG
GROSS MASS CHARGED: 7.9KG
WITDH: 145MM
HEIGHT: 500MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
9.0KG MEGAFIRE HPRATING 6A:80B:E
HIGH PERFORMANCEHEAVY DUTYThese MegaFire High Performance
Fire Extinguishers have an extra
heavy duty valve, thicker cylinder
steel, more robust base and designed
for tough conditions typically
experienced in mining and heavy
construction vehicles and equipment.
Note: Vehicle mounting brackets are also available.
Supplied with wall mounting bracket as standard.
PIRTEK ITEM CODE: ME9ABEM
AGENT CAPACITY: 9.0KG
AGENT TYPE: DRY CHEMICAL POWDER
WORKING PRESSURE: 1400KPA AT 23°C
TEST PRESSURE: 2.5MPA
APPROVALS: AS/NZS 1841.5
DISCHARGE TIME: 22 SECONDS
NOZZLE SIZE: 6.0MM
NET MASS: 9.0KG
GROSS MASS CHARGED: 14.2KG
WITDH: 183MM
HEIGHT: 555MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STEEL
VALVE CONSTRUCTION: BRASS
SP
EC
IAL
IST
IN
FIR
E S
AF
ET
Y P
RO
DU
CT
S
SP
EC
IAL
IST
IN F
IRE
SA
FE
TY
PR
OD
UC
TS
PIRTEK ITEM CODE: ME35CO2
AGENT CAPACITY: 3.5KG
AGENT TYPE: CARBON DIOXIDE
PERIODIC TEST PRESSURE: 21.5 MPA
CYLINDER PRESSURE TEST: 5 YEARLY
FIRE RATING: 5B:E
APPROVALS: AS/NZS 1841.6
FERN NO: 22111-DG-7105
DISCHARGE TIME: 10.5 - 14 SECONDS
NET MASS: 3.5KG
GROSS MASS CHARGED: 5.1KG
WITDH: 153MM
HEIGHT: 535MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: ALUMINIUM
VALVE CONSTRUCTION: BRASS
MegaFire’s 3.5KG CO2
is suitable for use against
electrically energised
equipment and in electrical
environments (Class E),
the 3.5kg Carbon Dioxide
(CO2) extinguisher has been
manufactured to Australian
Standards, utilising state of
the art production facilities.
Extracted from the atmosphere,
CO2 is stored in a liquid state and
at a high pressure. The effect of a
CO2 extinguisher can be limited
where there is air movement and
discharge within a confi ned space
is defi nitely NOT recommended.
Supplied with wall mounting bracket as standard.
3.5KG MEGAFIRE CO2RATING 50B:E
PIRTEK ITEM CODE: ME5CO2
AGENT CAPACITY: 5.0KG
AGENT TYPE: CARBON DIOXIDE
PERIODIC TEST PRESSURE: 21.5 MPA
CYLINDER PRESSURE TEST: 5 YEARLY
FIRE RATING: 10B:E
APPROVALS: AS/NZS 1841.6
FERN NO: 22111-DG-7106
DISCHARGE TIME: 13 - 16 SECONDS
NET MASS: 5.0KG
GROSS MASS CHARGED: 12.0KG
WITDH: 153MM
HEIGHT: 680MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: ALUMINIUM
VALVE CONSTRUCTION: BRASS
MegaFire’s 3.5KG CO2 is suitable
for use against electrically energised equipment and in electrical environments (Class E), the 5.0kg Carbon Dioxide (CO2) extinguisher has been manufactured to Australian Standards, utilising state of the art production facilities.
Extracted from the atmosphere, CO2 is stored in a liquid state and at a high pressure. The effect of a CO2 extinguisher can be limited where there is air movement and discharge within a confi ned space is defi nitely NOT recommended.
Supplied with wall mounting bracket as standard.
5.0KG MEGAFIRE CO2RATING 10B:E
SP
EC
IAL
IST
IN
FIR
E S
AF
ET
Y P
RO
DU
CT
S
SP
EC
IAL
IST
IN F
IRE
SA
FE
TY
PR
OD
UC
TS
PIRTEK ITEM CODE: ME9LAF
AGENT CAPACITY: 9 LITRES
AGENT TYPE: AFFF CONCENTRATE
PRESSURE: 700KPA
PERIODIC TEST PRESSURE: 2.5MPA
CYLINDER PRESSURE TEST: 5 YEARLY
FIRE RATING: 3A:30B
APPROVALS: AS/NZS 1841.4
FERN NO: 20422-LM-5401
DISCHARGE TIME: 32 SECONDS
EFFECTIVE RANGE: 6 METRES
NET MASS: 9.0KG
GROSS MASS CHARGED: 12.1KG
WITDH: 181MM
HEIGHT: 630MM
CYLINDER FINISH: POWDER COATED RED
VALVE FINISH: NICKEL PLATED BRASS
HANDLE FINISH: STAINLESS STEEL
CYLINDER CONSTRUCTION: STAINLESS STEEL
VALVE CONSTRUCTION: BRASS
MegaFire’s 9L AFFF foam fi re
extinguisher contains a concentrate
mixed with water which produces a
foam when discharged (Aqueous Film
Forming Foam).
Available in a 9.0 Litre capacity, the foam
extinguisher is best suited for the use against
fi res that involve fl ammable and combustible
liquids such as paper, textiles, wood, petrol,
oil, paints, plastics and rubber. Like the
water fi re extinguisher, a foam extinguisher
should never be used on fi res involving
live electrical equipment or in any sort of
electrical environment.
Note: Vehicle mounting brackets are also available.
Supplied with wall mounting bracket as standard.
9.0L MEGAFIRE AFFFRATING 3A:30B
VEHICLE BRACKETS
PIRTEK ITEM CODE:
MEVB9CG
DESCRIPTION
HEAVY DUTY - GALVANISED BRACKET
• FITS UP TO 9.0KG CANNON STYLE
PIRTEK ITEM CODE:
MEVB9C
DESCRIPTION
HEAVY DUTY - BLACK POWDER COATED BRACKET
• FITS UP TO 9.0KG CANNON STYLE
PIRTEK ITEM CODE:
MEVB45CG
DESCRIPTION
HEAVY DUTY - GALVANISED BRACKET
• FITS UP TO 4.5KG CANNON STYLE
PIRTEK ITEM CODE:
MEVB45C
DESCRIPTION
HEAVY DUTY - BLACK POWDER COATED BRACKET
• FITS UP TO 4.5KG CANNON STYLE
HEAVY DUTY - GALVANISED BRACKET
HEAVY DUTY - BLACK POWDER COATED BRACKET
PIRTEK ITEM CODE:
HEAVY DUTY - GALVANISED BRACKET
PIRTEK ITEM CODE:
PIRTEK ITEM CODE:PIRTEK ITEM CODE:
PIRTEK ITEM CODE:
MEVB9QR
DESCRIPTION
HEAVY DUTY - OVER CENTRE BRACKET
• FITS 9.0KG EXTINGUISHERS
PIRTEK ITEM CODE:
MEVB45QR
DESCRIPTION
HEAVY DUTY - OVER CENTRE BRACKET
• FITS 4.5KG EXTINGUISHERS
PIRTEK ITEM CODE:
DESCRIPTION
HEAVY DUTY - OVER CENTRE BRACKET
PIRTEK ITEM CODE:PIRTEK ITEM CODE:
SP
EC
IAL
IST
IN
FIR
E S
AF
ET
Y P
RO
DU
CT
S
Top Related