Medium PressureProductsMPI™ Fittings, Valves, Regulatorsand Hoses6,000 - 20,000 PSI Range
Catalog 4234Revised, September 2003
MPI™ FittingsMPI™ Medium Pressure Fittings
2 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
IntroductionParker Hannifin MPI™ Fittings* have been engineeredand manufactured to provide secure, tight, and leak-resistant connections throughout industry, includingoff-shore oil and gas exploration platforms, researchlabs, and other facilities that require operating pres-sures in the range of 6,000 to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids,gases, or chemicals and can be used on a wide varietyof tubing materials including cold drawn - 1/8 hard(unannealed) tubing or instrument grade thick-walledannealed stainless steel. Every Parker MPI™ Fitting issupplied complete and ready to install.
Advanced FeaturesEvery MPI™ Fitting has the features shown below:
1. Front ferrule with corrosion-resistant ParkerSUPARCASE® forms a tight pressure sealbetween the body and ferrule in a secondstrong mechanical hold on the tube.
2. Rear ferrule with corrosion-resistant ParkerSUPARCASE® provides a strong mechani-cal hold on the tube.
3. Longer thread area for improved resistanceto pressure and load on the ferrules.
4. Molybdenum disulfide-coated inverted nuthelps prevent galling, provides easierassembly, and permits multiple remakes.
5. Long tube-support area improves resistanceto vibration and line loads.
Materials and IdentificationStandard MPI™ Fittings are made of Heat Code Trace-able 316 stainless steel. Tubing and fitting materialsshould be selected based on compatibility with the fluidor gas media.
Part numbers for MPI™ Fittings use symbols thatidentify their style, size, and composition.
MPI™ Fittings Pressure RatingsThe maximum pressure rating is marked on eachfitting. MPI™ Fittings are designed to a 4 to 1 safetyfactor.
• Size 4 MPI™ end—to 15,000 psi
• Size 6 MPI™ end—to 15,000 psi• Size 8 MPI™ end—to 12,500 psi
• Size 9 MPI™ end—to 12,500 psi
AssemblyMPI™ Fittings are installed with standard hand tools.Each size can be preset with a Parker hydraulic presettool. Tube preparation does not require cutting ofthreads or tube end “coning”.
*Patent Pending1 2 3 4 5
Dedication To Quality
Our resources and vast product line, is available through ourworldwide distribution network. For more information regardingour products and services, please contact your authorizedParker Instrumentation Distributor.
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
3
Assembly, Remake & Gaugeability Instructions
1. Parker MPI™ Fittings are sold completely assembled and ready forimmediate use. Simply insert the tube as illustrated until it bottomsin the fitting body. (If the fitting is disassembled, note that the smalltapered end of the ferrule(s) go into the fitting body.)
2. For MPI™ Fittings from 1/4” to 1”, turn the nut to the “finger-tight”position. Hold the fitting body hex with a second wrench to preventthe body from turning as you continue tightening the nut. Use awrench to tighten the nut 1 1/2 turns. Parker recommends thatyou mark the nut (using a scribe or ink) to help you countthe turns.
3. For maximum number of remakes, mark the fitting and nutbefore disassembly. Before retightening, make sure the assemblyhas been inserted into the fitting until the ferrule seats in the fitting.Retighten the nut by hand. Rotate the nut with a wrench to theoriginal position as indicated by the previous marks lining up.(A noticeable increase in mechanical resistance will be feltindicating the ferrule is being re-sprung into sealing position.)
4. Finally, check the gap between the nut and the body hex with theend of the gauge by inserting the gauge (as shown) into thebeveled gap between the nut and body hex. Gently turn the gauge(that is, it “twists out”). However, if the gauge slides into thebeveled gap, (does not “twist out”) the fitting is not properlymade up and you must check the entire assembly procedure.
WARNINGFAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by usershaving technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due tothe variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of theproducts and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and itssubsidiaries at any time without notice.
© Copyright 2003, Parker Hannifin Corporation. All Rights Reserved.
Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance aregoverned by the provisions stated in the “Offer of Sale”.
4 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
MPI™ FittingsMPI™ Medium Pressure Fittings
IntroductionMPI
™ Fittings
FBMP7MPI™ Male Connector ........... Page 9
XHBMP737o Flare to MPI™ Connector .... Page 9
MP7H2BX37o Flare Bulkhead toMPI™ Connector ................... Page 9
X41HBMP7High Pressure toMPI™ Connector ................. Page 10
X42HBMP7Medium Pressure toMPI™ Connector ................. Page 10
MP7HBAMPI™ to SAE MaleO-ring Connector ................ Page 11
M40HBMP7Type “M” High PressureHose to MPI™ Connector ....... Page 11
HBMP7MPI™ to Union Connector ...... Page 12
WBMP7MPI™ Bulkhead UnionConnector ........................ Page 12
T7HFMPI™ Tube Stubto Male NPT Pipe ............... Page 12
XHT737o Flare to MPI™
Tube Stub ......................... Page 13
X41HT7High Pressure to MPI™
Tube Stub ......................... Page 13
• Assembly, Remake &Gaugeability Instructions
...................................... Page 3
• Typical Raw Materials...................................... Page 6
• How To Order...................................... Page 6
• Tubing Selection Guide...................................... Page 7
• MPI™ Fitting PresettingTool Kit
..................................... Page 19
X42HT7Medium Pressure to MPI™
Tube Stub ......................... Page 13
T7HOAMPI™ Tube Stubto Male SAE O-ring ............. Page 14
T7HBT7MPI™ Tube PortConnector ........................ Page 12
TRBMP7MPI™ TubeStub Reducer .................... Page 14
MP7PCMPI™ Port Connector ........... Page 15
NBMP745o MPI™ Union Elbow ......... Page 15
EBMP7MPI™ Union Elbow .............. Page 16
T7EBT7MPI™ Tube Elbow ................ Page 16
CBMP7MPI™ to MaleNPT Elbow ........................ Page 16
JBMP7MPI™ Union Tee ................. Page 17
RBMP7MPI™ to Male RunNPT Tee to MaleSAE O-ring ....................... Page 17
T7NBT745o MPI™ TubeStub Elbow ....................... Page 15
SBMP7MPI™ to Male BranchNPT Tee ........................... Page 18
FNMP7MPI™ Plug ........................ Page 18
MPFFMPI™ Front Ferrule ............. Page 18
MPBFMPI™ Back Ferrule .............. Page 19
BMP7MPI™ Nut .......................... Page 19
PNBMP7MPI™ Cap ......................... Page 18
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
5
MPI™ FittingsMPI™ Medium Pressure Products
Two Way Inline Valves..................................... Page 20
Medium Pressure Valves
Two Way Angle Valves..................................... Page 21
Three Way/Two PressureConnections..................................... Page 22
Three Way/One PressureConnection..................................... Page 22
Three Way/TwoStem Connection..................................... Page 23
Two Way Angle Valves(Replaceable Seat)..................................... Page 23
Two Way Ball Valves..................................... Page 24
Three Way Ball Valves..................................... Page 25
Inline Filters..................................... Page 26
Ball Check Valves..................................... Page 27
Check Valves..................................... Page 28
Relief Valves (Factory Set)..................................... Page 29
Union CouplingsCone and Thread ................ Page 30
Bulkhead UnionCone and Thread ................ Page 30
Medium Pressure ElbowsCone and Thread ................ Page 30
Medium Pressure TeesCone and Thread ................ Page 31
Medium Pressure CrossesCone and Thread ................ Page 31
Connection ComponentsCone and Thread ................ Page 31
CapsCone and Thread ................ Page 32
Medium Pressure Anti-Vibration Gland AssembliesCone and Thread ................ Page 32
Anti-Vibration Component PartNumbersCone and Thread ................ Page 32
316SS HT#XXXXX9MP7-MPNAB-T-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPNAB-T-SS
12,500 PSI
9MP7-MPNLB-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNLB-T-SS316SS HT#XXXXX
12,500 PSI
12,500 PSI316SS HT#XXXXX
9MP7-MPNXBI-T-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPNXBI-T-SS
9MP7-MPNXBO-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNXBO-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNXBD-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNXBD-T-SS316SS HT#XXXXX
12,500 PSI
12,500 PSI316SS HT#XXXXX
9MP7-MPNABR-T-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPNABR-T-SS
HT#XXXXXHT#XXXXXHT#XXXXXHT#XXXXX
12,500 PSI316SS HT#XXXXX
9MP7-MPBLPKH-V-SSP
12,500 PSI316SS HT#XXXXX
9MP7-MPBLPKH-V-SSP
HT#XXXXXHT#XXXXXHT#XXXXXHT#XXXXX
HT
#XX
XX
XH
T#X
XX
XX
9MP7-MPBXPK-V-SSP316SS HT#XXXXX
12,500 PSI
9MP7-MPBXPK-V-SSP316SS HT#XXXXX
12,500 PSI
HT#XXXXXHT#XXXXX HT#XXXXXHT#XXXXX12,500 PSI316SS HT#XXXXX9MP7-MPFL-40-SS
12,500 PSI316SS HT#XXXXX9MP7-MPFL-40-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPCBL-5-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPCBL-5-SS
HT#XXXXXHT#XXXXX
HT#XXXXXHT#XXXXX
9MP7-MPCL-5-V-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPCL-5-V-SS316SS HT#XXXXX
12,500 PSI
Cone and Thread Fittings
polyflex® Hose
2020N-02..................................... Page 34
2380N-04..................................... Page 34
How to Order..................................... Page 33
Medium Pressure RegulatorsXPR Series ....................... Page 33
Medium Pressure Regulators
How to Order..................................... Page 33
Medium Pressure Ball Valve
Medium Pressure Ball Valve..................................... Page 33
MPI™ FittingsMPI™ Medium Pressure Fittings
6 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
(1) If additional information, including heat code traceability, is required,contact Parker Hannifin or your nearest MPI™ Fitting distributor.
(2) Stainless steel Parker MPI™ Fittings work reliably on cold drawn - 1/8hard (unannealed), thick-wall 316 tubing and fully annealed type 316tubing.
Typical Raw Material Specifications
STAINLESS STEEL ASME SA-479 ASME SA-182 316(Type 316) (1) Type 316-SS BS970 316-S31
BS970 316-S31 DIN 4401DIN 4401
Basic FittingMaterial Bar Stock Forging
How To Order MPI™ FittingsParker MPI™ Fittings should be ordered using the part number as listed in this catalog.
Part numbers are developed as follows:1. A combination of letters and numbers identifies the size and style of the fitting and the material used.
2. Tube and pipe thread sizes are designated by the number of sixteenths of an inch (1/4” tube = 4/16” or 4).
All standard MPI™ Fittings are manufactured from 316 stainless steel. Other materials are available upon specialorder.
Customer Requests: When special configurations are required, please provide a blueprint of the installation toParker with your request for a price quote.
Tees:Example:Part number 6-6-6 JBMP7 would have the followingspecifications:
Straights and Elbows: Specify the largest end of theMPI first, followed by the smaller tube end OR pipethread size.
Example:Part number 4-4 HBMP7 union would have thespecifications listed below.
4-4 HBMP7
1 2
6 - 6 - 6 JB MP7 - SS
3/8” 3/8” 3/8” Tee Medium StainlessTube Tube Branch Pressure Steel
Inverted
3
6-6-6 JBMP7
4 - 4 HB MP7 - SS
1/4” 1/4” Union Medium StainlessTube Tube Pressure Steel
Inverted
(1) (2) (3)
Tube End Dimensional Data
SizeNo.
TubeO.D.
4 1/4 1/2 - 20 .50 1.34 .13 1.62 9/166 3/8 5/8 - 20 .63 1.58 .25 1.88 11/168 1/2 13/16 - 20 .69 1.85 .31 2.12 5/169 9/16 7/8 - 20 .75 1.91 .38 2.25 1
StraightThread C D E
WHEX
Inches
"E"
"D""C"
"W"HEX
"L"
*L
* L = Recommended Straight Length of Circular Un-bent Tubing
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
7
Tubing Selection GuideAlthough Parker’s MPI™ Fittings have been engineeredand manufactured to consistently provide high levelsof reliability, no system’s integrity is complete withoutconsidering the critical link: tubing.
This section is intended to help you properly selectand order quality tubing, both annealed and medium-pressure cold drawn - 1/8 hard (unannealed).
Parker believes that proper tubing selection andinstallation are key to building leak-free, reliable tubingsystems.
Parker’s MPI™ Fittings have been designed to operateon a wide variety of “medium pressure” applications(6,000 to 15,000 psi).
General Selection CriteriaThe data tables in this section will help you select thetubing that best satisfies the needs of the application.
The most important consideration in the selection ofsuitable tubing for any application is the compatibilityof the tubing materials with the media to be contained.
System PressureThe system operating pressure is another importantfactor in determining the type, and more importantly,the size of tubing to be used. In general, high pressureinstallations require strong materials such as stainlesssteel.Tube fitting assemblies should never be pressur-ized beyond the recommended working pressure.
Maximum Allowable Working Pressure Tables
Tubing Compatibility
(1) For operating temperatures above 800°F (425°C), consideration should be given tomedia. 300 Series Stainless Steels are susceptible to carbide precipitation which maylead to intergranular corrosion at elevated temperatures.All temperature ratings based on maximum rated temperatures per ASME/ANSI B31.3Chemical Plant and Petroleum Refinery Piping Code, 1999 Edition. The informationlisted in Table 1 is general in scope. For specific applications, please contact Parker’sInstrumentation Products Division, Product Engineering Department (256) 881-2040.
Tubing General RecommendedMaterial Application Temperature Range
Stainless SteelHigh Pressure,
-425°F to 1200°F (1)
High Temperature,(-255°C to 650°C)Generally Corrosive Media
Table 1
Table 1 lists 316 stainless steel along with its associated general applications and recommendedtemperature ranges.
Inside R & D facilities at major industrial plants, MPI™ Fittings withstand the rigorsof pressurized testing systems and other high stress applications.
MPI™ FittingsMPI™ Medium Pressure Fittings
8 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
Tables 2 and 3 list the maximum suggested working pressure of various tubing sizes, according to material.Acceptable tubing diameters and wall thicknesses are those for which a rating is listed. Combinations which donot have a pressure rating are not recommended for use with MPI™ Fittings.
.065 .083 .095 .109 .120 .134 .156 .188
1/4 10,300 13,3003/8 6,600 8,600 10,000 11,7001/2 6,700 7,800 9,100 10,000 11,400
Table 3TubeO.D.
Size (in.)
Instrumentation Grade Tubing
316 Stainless Steel (Seamless/Annealed)
At chemical plants, corrosion-resistance on flow lines, injections pumps, controlpanels, and tubing systems is crucial for dependable operation. MPI™ Fittings meetthe challenge.
NOTE: Working pressures calculated using an allowable stress of 20,000psi for annealed 316 stainless steel tubing with a nominal O.D. tolerance of± .005”.
Medium Pressure TubingMPI™ Fittings are designed to work with stainless steel, seamless,cold drawn - 1/8 hard, (unannealed) tubing. Tensile strength isapproximately 40% higher than that of annealed tubing.
Table 2
NominalOD (in.)
NominalID (in.)
WorkingPressure
NOTE: Working pressures calculated using an allowable stress of 35,000 psi for 1/8 hard316 stainless steel tubing with a minimum tensile strength of 105,000 psi.NOTE: MPI™ fittings are designed to work with nominal O.D. 1/8 hard tubing with a max.O.D. tolerance of ± .004”. Consult the factory for possible use with tubing ouside thistolerance range.*Consult the factory for pressure tables regarding other materials.**.359 I.D. limited to 12,500 psi working pressure when used with MPI™ fittings.
TubeSize1/4” .250 .125 15,000
3/8” .375 .250 12,500 .216 15,000
9/16” .562 .359 12,500
316 Stainless Steel (Seamless/Unannealed - 1/8 Hard)
NominalID (in.)
WorkingPressure
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
9
FBMP7MPI™ to MaleNPT Connector
PARKERPART NO.
MPI™
SIZE4-2 FBMP7 1/4 1/8 - 27 1.91 .38 1.03 5/8 15,0004-4 FBMP7 1/4 1/4 - 18 2.10 .57 1.03 5/8 15,0004-6 FBMP7 1/4 3/8 - 18 2.00 .57 .93 3/4 12,0004-8 FBMP7 1/4 1/2 - 14 2.17 .76 .91 5/8 10,0006-4 FBMP7 3/8 1/4 - 18 2.43 .57 1.24 3/4 15,0006-6 FBMP7 3/8 3/8 - 18 2.43 .57 1.24 3/4 12,0006-8 FBMP7 3/8 1/2 - 14 2.48 .76 1.10 3/4 10,0008-6 FBMP7 1/2 3/8 - 18 2.85 .57 1.60 1" 12,0008-8 FBMP7 1/2 1/2 - 14 2.81 .76 1.37 1" 10,0009-6 FBMP7 9/16 3/8 - 18 2.91 .57 1.59 1 1/16 12,0009-8 FBMP7 9/16 1/2 - 14 3.04 .76 1.53 1 1/16 10,000
A B DW
HEX
INCHES
NPTTHREAD
WORKINGPRESSURE
(PSIG)
"D""A"
"B"
FBMP7 NPTTHREADS
"W"HEX
XHBMP737º Flare to MPI™ Connector
4-4 XHBMP7 1/4 1/4 2.08 .55 1.03 7/16 - 20 5/8 15,0004-6 XHBMP7 1/4 3/8 2.54 .55 1.37 7/16 - 20 3/4 15,0004-8 XHBMP7 1/4 1/2 2.90 .55 1.66 7/16 - 20 1 12,5004-9 XHBMP7 1/4 9/16 2.96 .55 1.66 7/16 - 20 1 1/16 12,5006-4 XHBMP7 3/8 1/4 1.97 .56 .92 9/16 - 18 5/8 12,5006-6 XHBMP7 3/8 3/8 2.24 .56 1.06 9/16 - 18 3/4 12,5006-8 XHBMP7 3/8 1/2 2.90 .56 1.66 9/16 - 18 1 12,5006-9 XHBMP7 3/8 9/16 2.97 .56 1.66 9/16 - 18 1 1/16 12,5008-6 XHBMP7 1/2 3/8 2.34 .66 1.06 3/4 - 16 13/16 12,5008-8 XHBMP7 1/2 1/2 2.69 .66 1.34 3/4 - 16 1 12,5008-9 XHBMP7 1/2 9/16 2.77 .66 1.36 3/4 - 16 1 1/16 12,500
PARKERPART NO.
37O FLAREADAPTER
INCHES WORKINGPRESSURE
(PSIG)MPI™
SIZE A B DT
THREADW
HEX
4-4 MP7H2BX 1/4 1/4 2.76 1.53 .40 7/16 - 20 11/16 5/8 15,0006-6 MP7H2BX 3/8 3/8 3.24 1.93 .48 9/16 - 18 13/16 3/4 12,5008-8 MP7H2BX 1/2 1/2 3.44 1.97 .50 3/4 - 16 1 1 12,5008-9 MP7H2BX 1/2 9/16 3.76 2.29 .50 3/4 - 16 1 1 1/16 12,500
PARKERPART NO.
37o FLAREADAPTER
INCHES WORKINGPRESSURE
(PSIG)MPI™
SIZE A B H MAXT
THREADWLNHEX
WHEX
MP7H2BX37º Flare Bulkhead toMPI™ Connector
"B"
"A"
"D"
"T"THREADS
"W"HEX
"A""H"
MAX
"WLN"HEX
"B"
"W"HEX
"T"THREADS
MPI™ FittingsMPI™ Medium Pressure Fittings
10 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
X41HBMP7High Pressure toMPI™ Connector
4-4 X41HBMP7 1/4 1/4 2.25 .72 1.03 9/16 - 18 5/8 15,0004-6 X41HBMP7 1/4 3/8 2.71 .72 1.37 9/16 - 18 3/4 15,0006-4 X41HBMP7 3/8 1/4 2.52 .92 1.10 3/4 - 16 13/16 15,0006-6 X41HBMP7 3/8 3/8 2.92 .92 1.37 3/4 - 16 13/16 15,0006-9 X41HBMP7 3/8 9/16 3.37 .92 1.70 3/4 - 16 1 1/16 12,5009-6 X41HBMP7 9/16 3/8 3.12 1.13 1.37 1 1/8 - 12 1 3/16 15,0009-9 X41HBMP7 9/16 9/16 3.58 1.13 1.70 1 1/8 - 12 1 3/16 12,500
PARKERPART NO.
HIGH PRESSUREADAPTER
INCHES WORKINGPRESSURE
(PSIG)MPI™
SIZE A B DT
THREADW
HEX
X42HBMP7Medium Pressure toMPI™ Connector
4-4 X42HBMP7 1/4 1/4 2.34 .81 1.03 7/16 - 20 5/8 15,0004-6 X42HBMP7 1/4 3/8 2.80 .81 1.37 7/16 - 20 3/4 15,0004-9 X42HBMP7 1/4 9/16 3.31 .81 1.75 7/16 - 20 1 1/16 12,5006-4 X42HBMP7 3/8 1/4 2.47 .94 1.03 9/16 - 18 3/4 15,0006-6 X42HBMP7 3/8 3/8 2.93 .94 1.37 9/16 - 18 3/4 15,0006-8 X42HBMP7 3/8 1/2 3.28 .94 1.65 9/16 - 18 1 12,5006-9 X42HBMP7 3/8 9/16 3.44 .94 1.75 9/16 - 18 1 1/16 12,5009-4 X42HBMP7 9/16 1/4 2.56 1.13 .93 13/16 - 16 7/8 15,0009-6 X42HBMP7 9/16 3/8 2.85 1.13 1.10 13/16 - 16 7/8 15,0009-8 X42HBMP7 9/16 1/2 3.16 1.13 1.35 13/16 - 16 1 12,5009-9 X42HBMP7 9/16 9/16 3.41 1.13 1.54 13/16 - 16 1 1/16 12,500
PARKERPART NO.
MEDIUM PRESSUREADAPTER
INCHES WORKINGPRESSURE
(PSIG)MPI™
SIZE A B DT
THREADW
HEX
"T"THREADS
"A""B" "D"
"W"HEX
"W"HEX
"T"THREADS
"A"
"D""B"
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
11
M40HBMP7Type “M” High Pressure Hoseto MPI™ Connector
6-4 M40HBMP7 - 6 1/4 2.03 .50 1.03 9/16 - 18 5/8 15,0006-6 M40HBMP7 - 6 3/8 2.45 .50 1.32 9/16 - 18 3/4 15,0008-6 M40HBMP7 - 8 3/8 2.57 .63 1.32 3/4 - 16 13/16 15,0008-8 M40HBMP7 - 8 1/2 2.90 .63 1.59 3/4 - 16 1" 12,5008-9 M40HBMP7 - 8 9/16 2.97 .63 1.59 3/4 - 16 1 1/16 12,500
10-4 M40HBMP7 - 10 1/4 2.39 .75 1.14 7/8 - 14 15/16 15,00010-6 M40HBMP7 - 10 3/8 2.72 .75 1.34 7/8 - 14 15/16 12,50011-8 M40HBMP7 - 11 1/2 2.89 .63 1.58 1" - 12 1 1/16 12,50011-9 M40HBMP7 - 11 9/16 2.95 .63 1.58 1" - 12 1 1/16 12,500
PARKERPART NO.
HOSE*ADAPTER
INCHES WORKINGPRESSURE
(PSIG)MPI™
SIZE A B DT
THREADW
HEX
* Adapts to Type “M” Swivel Hose Connection
"D"
"A"
"B"
"T"THREADS"W"
HEX
MP7HBAMPI™ to SAE MaleO-ring Connector
4-4 MP7HBA 1/4 1/4 1.90 .43 .97 7/16 - 20 5/8 12,5004-6 MP7HBA 1/4 3/8 1.94 .47 .97 9/16 - 18 11/16 12,5004-8 MP7HBA 1/4 1/2 1.97 .55 .91 3/4 - 16 7/8 12,5006-4 MP7HBA 3/8 1/4 2.41 .43 1.35 7/16 - 20 3/4 12,5006-6 MP7HBA 3/8 3/8 2.20 .47 1.10 9/16 - 18 3/4 12,5006-8 MP7HBA 3/8 1/2 2.23 .55 1.05 3/4 - 16 7/8 12,5008-4 MP7HBA 1/2 1/4 2.81 .43 1.69 7/16 - 20 1 12,5008-6 MP7HBA 1/2 3/8 2.82 .47 1.66 9/16 - 18 1 12,5008-8 MP7HBA 1/2 1/2 2.60 .55 1.36 3/4 - 16 1 12,5009-6 MP7HBA 9/16 3/8 2.89 .47 1.67 9/16 - 18 1 1/16 12,5009-8 MP7HBA 9/16 1/2 2.89 .55 1.59 3/4 - 16 1 1/16 12,500
PARKERPART NO.
MPI™
SIZE
INCHES WORKINGPRESSURE
(PSIG)SAE*END A B D
TTHREAD
WHEX
*All male o-ring ends for MPI™ fittings are heavy duty and comply with SAE J1926-2. This end has maximum thread engagement for strength and requiresthe minimum full thread engagement specified in SAE J9126 for the female port.
"T"THR'D
"D""A"
"W"HEX
"B"
MPI™ FittingsMPI™ Medium Pressure Fittings
12 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
HBMP7MPI™ to Union Connector PARKER
PART NO.MPI™
SIZE4-4 HBMP7 1/4 2.88 1.88 5/8 15,0006-6 HBMP7 3/8 3.44 2.19 3/4 15,0008-8 HBMP7 1/2 4.07 2.70 1 12,5009-9 HBMP7 9/16 4.20 2.70 1 1/16 12,500
DW
HEX
INCHES
A
WORKINGPRESSURE
(PSIG)
HBMP7
"D"
"A"
"W"HEX
T7HFMPI™ Tube Stubto Male NPT Pipe
PARKERPART NO.
MPI™
TUBE STUB4-4 T7HF 1/4 1/4 2.32 .57 1/4 - 18 5/8 15,0004-6 T7HF 1/4 3/8 2.44 .57 3/8 - 18 3/4 12,0004-8 T7HF 1/4 1/2 2.76 .76 1/2 - 14 7/8 10,0006-4 T7HF 3/8 1/4 2.56 .57 1/4 - 18 5/8 12,5006-6 T7HF 3/8 3/8 2.68 .57 3/8 - 18 3/4 12,0006-8 T7HF 3/8 1/2 2.99 .76 1/2 - 14 7/8 10,0008-4 T7HF 1/2 1/4 2.82 .57 1/4 - 18 5/8 12,5008-6 T7HF 1/2 3/8 2.95 .57 3/8 - 18 3/4 12,0008-8 T7HF 1/2 1/2 3.26 .76 1/2 - 14 7/8 10,0009-4 T7HF 9/16 1/4 2.88 .57 1/4 - 18 5/8 12,5009-6 T7HF 9/16 3/8 3.01 .57 3/8 - 18 3/4 12,0009-8 T7HF 9/16 1/2 3.32 .76 1/2 - 14 7/8 10,000
Add “-Z6” to part number for part assembled with preset ferrules and nuts
A BT
THREADW
HEX
INCHES
MALENPT END
WORKINGPRESSURE
(PSIG)
T7HBT7MPI™ Tube PortConnector
PARKERPART NO.
TUBESIZE
* 4-4 T7HBT7-SS 1/4 2.72 15,0004-4 T7HBT7-SS-4 1/4 4.00 15,0004-4 T7HBT7-SS-6 1/4 6.00 15,0004-4 T7HBT7-SS-9 1/4 9.00 15,000
4-4 T7HBT7-SS-12 1/4 12.00 15,000* 6-6 T7HBT7-SS 3/8 3.19 15,0006-6 T7HBT7-SS-4 3/8 4.00 15,0006-6 T7HBT7-SS-6 3/8 6.00 15,0006-6 T7HBT7-SS-9 3/8 9.00 15,000
6-6 T7HBT7-SS-12 3/8 12.00 15,000* 9-9 T7HBT7-SS 9/16 3.85 12,5009-9 T7HBT7-SS-6 9/16 6.00 12,5009-9 T7HBT7-SS-9 9/16 9.00 12,500
9-9 T7HBT7-SS-12 9/16 12.00 12,500* Same Assembled Length as MP7PC
INCHES
L
WORKINGPRESSURE
(PSIG)
WBMP7MPI™ Bulkhead UnionConnector
PARKERPART NO.
MPI™
SIZE4-4 WBMP7 1/4 2.88 1.88 .88 .50 1 15,0006-6 WBMP7 3/8 3.44 2.19 1.07 .56 1 1/8 15,0008-8 WBMP7 1/2 4.07 2.70 1.32 .69 1 3/8 12,5009-9 WBMP7 9/16 4.20 2.70 1.32 .69 1 3/8 12,500
D H MAX TW
HEX
INCHES
A
WORKINGPRESSURE
(PSIG)
"T" "H"Max
"D"
"A"
"W"HEX
"T"
"L"
"A"
"B"
"W"HEX
"T"THREADS
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
13
XHT737º Flare to MPI™
Tube StubPARKER
PART NO.37O FLARE
ADAPTER SIZE4-4 XHT7 1/4 1/4 2.24 7/16 - 20 1/2 12,5004-6 XHT7 1/4 3/8 2.47 7/16 - 20 1/2 12,5006-4 XHT7 3/8 1/4 2.37 9/16 - 18 5/8 12,5006-6 XHT7 3/8 3/8 2.60 9/16 - 18 5/8 12,5006-8 XHT7 3/8 1/2 2.87 9/16 - 18 5/8 12,5006-9 XHT7 3/8 9/16 2.93 9/16 - 18 5/8 12,5008-6 XHT7 1/2 3/8 2.77 3/4 - 16 13/16 12,5008-8 XHT7 1/2 1/2 3.04 3/4 - 16 13/16 12,5008-9 XHT7 1/2 9/16 3.10 3/4 - 16 13/16 12,500
AT
THREADW
HEX
INCHES
Add “-Z6” to part number for part assembled with preset ferrules and nuts
MPI™
TUBE STUB
WORKINGPRESSURE
(PSIG)
X41HT7High Pressure to MPI™
Tube StubPARKER
PART NO.HIGH PRESSUREADAPTER SIZE
4-4 X41HT7 1/4 1/4 2.59 9/16 - 18 5/8 15,0004-6 X41HT7 1/4 3/8 2.83 9/16 - 18 5/8 12,5004-8 X41HT7 1/4 1/2 3.10 9/16 - 18 5/8 12,5004-9 X41HT7 1/4 9/16 3.16 9/16 - 18 5/8 12,5006-4 X41HT7 3/8 1/4 2.92 3/4 - 16 13/16 15,0006-6 X41HT7 3/8 3/8 3.16 3/4 - 16 13/16 12,5006-8 X41HT7 3/8 1/2 3.43 3/4 - 16 13/16 12,5006-9 X41HT7 3/8 9/16 3.49 3/4 - 16 13/16 12,5009-4 X41HT7 9/16 1/4 3.25 1 1/8 - 12 1 3/16 15,0009-6 X41HT7 9/16 3/8 3.49 1 1/8 - 12 1 3/16 12,5009-8 X41HT7 9/16 1/2 3.75 1 1/8 - 12 1 3/16 12,5009-9 X41HT7 9/16 9/16 3.82 1 1/8 - 12 1 3/16 12,500
AT
THREADW
HEX
INCHES
Add “-Z6” to part number for part assembled with preset ferrules and nuts
MPI™
TUBE STUB
WORKINGPRESSURE
(PSIG)
X42HT7Medium Pressure toMPI™ Tube Stub
PARKERPART NO.
MEDIUM PRESSUREADAPTER SIZE
4-4 X42HT7 1/4 1/4 2.68 7/16 - 20 5/8 15,0004-6 X42HT7 1/4 3/8 2.92 7/16 - 20 5/8 12,5004-8 X42HT7 1/4 1/2 3.18 7/16 - 20 5/8 12,5004-9 X42HT7 1/4 9/16 3.25 7/16 - 20 5/8 12,5006-4 X42HT7 3/8 1/4 2.94 9/16 - 18 3/4 15,0006-6 X42HT7 3/8 3/8 3.17 9/16 - 18 3/4 12,5006-8 X42HT7 3/8 1/2 3.44 9/16 - 18 3/4 12,5006-9 X42HT7 3/8 9/16 3.50 9/16 - 18 3/4 12,5009-4 X42HT7 9/16 1/4 3.25 13/16 - 16 7/8 15,0009-6 X42HT7 9/16 3/8 3.49 13/16 - 16 7/8 12,5009-8 X42HT7 9/16 1/2 3.75 13/16 - 16 7/8 12,5009-9 X42HT7 9/16 9/16 3.81 13/16 - 16 7/8 12,500
AT
THREADW
HEX
INCHES
Add “-Z6” to part number for part assembled with preset ferrules and nuts
MPI™
TUBE STUB
WORKINGPRESSURE
(PSIG)
"A"
"T"THR'D
"W"HEX
"T"THR'D
"A""W"HEX
"A""W"HEX
"T"THR'D
MPI™ FittingsMPI™ Medium Pressure Fittings
14 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
T7HOAMPI™ Tube Stubto Male SAE O-ring
PARKERPART NO.
MPI™
TUBE STUB4-4 T7HOA 1/4 1/4 2.25 .43 7/16 - 20 9/16 12,5004-6 T7HOA 1/4 3/8 2.35 .47 9/16 - 18 11/16 12,5004-8 T7HOA 1/4 1/2 2.49 .55 3/4 - 16 7/8 12,5006-4 T7HOA 3/8 1/4 2.48 .43 7/16 - 20 9/16 12,5006-6 T7HOA 3/8 3/8 2.58 .47 9/16 - 18 11/16 12,5006-8 T7HOA 3/8 1/2 2.72 .55 3/4 - 16 7/8 12,5008-4 T7HOA 1/2 1/4 2.75 .43 7/16 - 20 9/16 12,5008-6 T7HOA 1/2 3/8 2.85 .47 9/16 - 18 11/16 12,5008-8 T7HOA 1/2 1/2 2.99 .55 3/4 - 16 7/8 12,5009-4 T7HOA 9/16 1/4 2.81 .43 7/16 - 20 5/8 12,5009-6 T7HOA 9/16 3/8 2.91 .47 9/16 - 18 11/16 12,5009-8 T7HOA 9/16 1/2 3.05 .55 3/4 - 16 7/8 12,500
A BT
THREADW
HEX
INCHES
SAEO-RING END
WORKINGPRESSURE
(PSIG)
Add “-Z6” to part number for part assembled with preset ferrules and nuts* All male o-ring ends for MPI™ fittings are heavy duty and comply with SAE J1926-2. This end hasmaximum thread engagement for strength and requires the minimum full thread engagementspecified in SAE J9126 for the female port.
TRBMP7MPI™ TubeStub Reducer PARKER
PART NO.MPI™ TUBE
STUB #14-6 TRBMP7 1/4 3/8 3.49 3/4 15,0004-8 TRBMP7 1/4 1/2 3.94 1" 12,5004-9 TRBMP7 1/4 9/16 4.00 1 1/16 12,5006-4 TRBMP7 3/8 1/4 3.30 5/8 12,5006-8 TRBMP7 3/8 1/2 4.17 1" 12,5006-9 TRBMP7 3/8 9/16 4.24 1 1/16 12,5008-4 TRBMP7 1/2 1/4 3.56 5/8 12,5008-6 TRBMP7 1/2 3/8 3.99 3/4 12,5009-4 TRBMP7 9/16 1/4 3.63 5/8 12,5009-6 TRBMP7 9/16 3/8 4.06 3/4 12,500
AW
HEX
INCHES
Add “-Z6” to part number for part assembled with preset ferrules and nuts
MPI™
SIZE #2
WORKINGPRESSURE
(PSIG)
"A"
"B"
"T"THREADS
"W"HEX
1
"W"HEX
2
"A"
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
15
MP7PCMPI™ Port Connector PARKER
PART NO.MPI™ TUBE
STUB #14-4 MP7PC 1/4 1/4 2.69 2.23 15,0004-6 MP7PC 1/4 3/8 2.93 2.40 12,5006-6 MP7PC 3/8 3/8 3.17 2.64 12,5006-8 MP7PC 3/8 1/2 3.43 2.68 12,5006-9 MP7PC 9/16 3/8 3.50 2.75 12,5008-8 MP7PC 1/2 1/2 3.70 2.95 12,5009-9 MP7PC 9/16 9/16 3.82 3.07 12,500
K
INCHES
Add “-Z6” to part number for part assembled with preset ferrules and nuts
A
WORKINGPRESSURE
(PSIG)
NBMP745º MPI™ Union Elbow PARKER
PART NO.MPI™
SIZE4-4 NBMP7 1/4 2.56 1.56 1.38 5/8 15,0006-6 NBMP7 3/8 3.10 1.87 1.63 3/4 15,0008-8 NBMP7 1/2 3.76 2.22 2.13 1 12,5009-9 NBMP7 9/16 3.82 2.29 2.13 1 12,500
C LW
TH'K
INCHES
A
WORKINGPRESSURE
(PSIG)
MPI™
PORT #2
* Similar Assembled Lengths as NBMP7 with Two (2) MP7PC’s
T7NBT745º MPI™ TubeStub Elbow
PARKERPART NO.
TUBESIZE
4-4 T7NBT7-SS 1/4 1.69 0.75 15,000* 4-4 T7NBT7-SS-2.9 1/4 2.88 0.75 15,000
4-4 T7NBT7-SS-6 1/4 6.00 0.75 15,0004-4 T7NBT7-SS-9 1/4 9.00 0.75 15,000
4-4 T7NBT7-SS-12 1/4 12.00 0.75 15,0006-6 T7NBT7-SS 3/8 2.14 1.25 15,000
* 6-6 T7NBT7-SS-3.4 3/8 3.42 1.25 15,0006-6 T7NBT7-SS-6 3/8 6.00 1.25 15,0006-6 T7NBT7-SS-9 3/8 9.00 1.25 15,000
6-6 T7NBT7-SS-12 3/8 12.00 1.25 15,0009-9 T7NBT7-SS 9/16 2.56 1.50 12,500
* 9-9 T7NBT7-SS-4.2 9/16 4.18 1.50 12,5009-9 T7NBT7-SS-6 9/16 6.00 1.50 12,5009-9 T7NBT7-SS-9 9/16 9.00 1.50 12,500
9-9 T7NBT7-SS-12 9/16 12.00 1.50 12,500
R
INCHES
H
WORKINGPRESSURE
(PSIG)
"A""K"
1 2
"W"TH'K
"L"135
"A""C"
"C"
45
"L"
"L"
"R"
MPI™ FittingsMPI™ Medium Pressure Fittings
16 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
EBMP7MPI™ Union Elbow PARKER
PART NO.MPI™
SIZE4-4 EBMP7 1/4 1.53 1.88 1.03 5/8 15,0006-6 EBMP7 3/8 1.86 2.25 1.24 3/4 15,0008-8 EBMP7 1/2 2.22 2.81 1.54 1 12,5009-9 EBMP7 9/16 2.29 2.88 1.54 1 12,500
H LW
TH'K
INCHES
C
WORKINGPRESSURE
(PSIG)
* Similar Assembled Lengths as EBMP7 with Two (2) MP7PC’s
T7EBT7MPI™ Tube Elbow PARKER
PART NO.TUBESIZE
4-4 T7EBT7-SS 1/4 2.12 0.75 15,000* 4-4 T7EBT7-SS-2.9 1/4 2.91 0.75 15,000
4-4 T7EBT7-SS-6 1/4 6.00 0.75 15,0004-4 T7EBT7-SS-9 1/4 9.00 0.75 15,000
4-4 T7EBT7-SS-12 1/4 12.00 0.75 15,0006-6 T7EBT7-SS 3/8 2.94 1.25 15,000
* 6-6 T7EBT7-SS-3.5 3/8 3.47 1.25 15,0006-6 T7EBT7-SS-6 3/8 6.00 1.25 15,0006-6 T7EBT7-SS-9 3/8 9.00 1.25 15,000
6-6 T7EBT7-SS-12 3/8 12.00 1.25 15,0009-9 T7EBT7-SS 9/16 3.44 1.50 12,500
* 9-9 T7EBT7-SS-4.2 9/16 4.22 1.50 12,5009-9 T7EBT7-SS-6 9/16 6.00 1.50 12,5009-9 T7EBT7-SS-9 9/16 9.00 1.50 12,500
9-9 T7EBT7-SS-12 9/16 12.00 1.50 12,500
R
INCHES
H
WORKINGPRESSURE
(PSIG)
"L""C"
"H"
"W"TH'K
"C"
"H""L"
"R"
"H"TYP.
"A"
"L" "W"HEX
"C"
"B"
CBMP7MPI™ to MaleNPT Elbow
4-4 CBMP7 1/4 1/4 - 18 1.13 .57 1.53 1.03 3/4 15,0004-6 CBMP7 1/4 3/8 - 18 1.13 .57 1.56 1.06 3/4 12,0004-8 CBMP7 1/4 1/2 - 14 1.41 .76 1.64 1.14 3/4 10,0006-4 CBMP7 3/8 1/4 - 18 1.23 .57 1.86 1.24 7/8 12,5006-6 CBMP7 3/8 3/8 - 18 1.23 .57 1.86 1.24 7/8 12,0006-8 CBMP7 3/8 1/2 - 14 1.41 .76 1.92 1.30 7/8 10,000
PARKERPART NO.
MPI™
SIZE
INCHES WORKINGPRESSURE
(PSIG)NPT
THREAD A B C LW
HEX
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
17
JBMP7MPI™ Union Tee
4-4-4 JBMP7 1/4 1/4 1/4 3.06 1.53 1.53 1.88 1.03 5/8 15,0006-6-6 JBMP7 3/8 3/8 3/8 3.72 1.86 1.86 2.25 1.24 3/4 15,0008-8-8 JBMP7 1/2 1/2 1/2 4.45 2.22 2.22 2.81 1.54 1 12,5009-9-9 JBMP7 9/16 9/16 9/16 4.57 2.29 2.29 2.88 1.54 1 12,500
4-4-6 JBMP7 1/4 1/4 3/8 3.47 1.74 1.74 2.25 1.24 3/4 15,0006-6-4 JBMP7 3/8 3/8 1/4 3.72 1.86 1.86 2.13 1.24 3/4 15,0006-4-4 JBMP7 3/8 1/4 1/4 3.60 1.86 1.74 2.13 1.24 3/4 15,0006-6-8 JBMP7 3/8 3/8 1/2 4.32 2.16 2.16 2.81 1.54 1 12,5006-6-9 JBMP7 3/8 3/8 9/16 4.45 2.16 2.29 2.88 1.54 1 12,5008-8-6 JBMP7 1/2 1/2 3/8 4.45 2.22 2.22 2.75 1.54 1 12,5008-6-6 JBMP7 1/2 3/8 3/8 4.38 2.22 2.16 2.75 1.54 1 12,5009-9-4 JBMP7 9/16 9/16 1/4 4.57 2.29 2.29 2.63 1.54 1 12,5009-9-6 JBMP7 9/16 9/16 3/8 4.57 2.29 2.29 2.75 1.54 1 12,5009-6-4 JBMP7 9/16 3/8 1/4 4.45 2.29 2.16 2.63 1.54 1 12,5009-6-6 JBMP7 9/16 3/8 3/8 4.45 2.29 2.16 2.75 1.54 1 12,500
PARKERPART NO.
MPI™
SIZE #1
INCHES WORKINGPRESSURE
(PSIG)MPI™
SIZE #2MPI™
SIZE #3 A C1 C2 H LW
TH'K
"W"HEX
"A"
"C1"
"C3"
"B""C2"
2RBMP7MPI™ to Male RunNPT Tee
4-4-4 RBMP7 1/4 1/4 - 18 1/4 2.76 1.63 1.13 1.63 .57 3/4 15,0004-4-6 RBMP7 1/4 1/4 - 18 3/8 2.85 1.63 1.23 1.86 .57 7/8 12,5004-6-4 RBMP7 1/4 3/8 -18 1/4 2.76 1.63 1.13 1.63 .57 3/4 12,0004-6-6 RBMP7 1/4 3/8 -18 3/8 2.85 1.63 1.23 1.86 .57 7/8 12,0006-4-4 RBMP7 3/8 1/4 - 18 1/4 3.09 1.86 1.23 1.63 .57 7/8 12,5006-4-6 RBMP7 3/8 1/4 - 18 3/8 3.09 1.86 1.23 1.86 .57 7/8 12,5006-6-4 RBMP7 3/8 3/8 -18 1/4 3.09 1.86 1.23 1.63 .57 7/8 12,0006-6-6 RBMP7 3/8 3/8 -18 3/8 3.09 1.86 1.23 1.86 .57 7/8 12,000
PARKERPART NO.
MPI™
SIZE #1
INCHES WORKINGPRESSURE
(PSIG)NPT
THR'D #2MPI™
SIZE #3 A C1 C2 C3 BW
TH'K
"C1""L"
"A"
"W"TH'K
1
"L"
"C2""L"
"H"
3
2
MPI™ FittingsMPI™ Medium Pressure Fittings
18 Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
FNMP7MPI™ Plug PARKER
PART NO.MPI™
SIZE4 FNMP7 1/4 1.41 9/16 15,0006 FNMP7 3/8 1.65 11/16 15,0008 FNMP7 1/2 1.94 15/16 12,5009 FNMP7 9/16 2.00 1 12,500
INCHES
A
WORKINGPRESSURE
(PSIG)W
HEX
PNBMP7MPI™ Cap PARKER
PART NO.MPI™
SIZE4 PNBMP7 1/4 1.69 1.19 5/8 15,0006 PNBMP7 3/8 2.12 1.49 3/4 15,0008 PNBMP7 1/2 2.62 1.93 1" 12,5009 PNBMP7 9/16 2.75 2.00 1 1/16 12,500
DW
HEX
INCHES
A
WORKINGPRESSURE
(PSIG)
MPFFMPI™ Front Ferrule
PARKERPART NO.
TUBEO.D.
4 MPFF 1/4 0.406 MPFF 3/8 0.528 MPFF 1/2 0.729 MPFF 9/16 0.78
FERRULEO.D.
"D""A"
"W"HEX
"A""W"HEX
"B"
"C2"
"A"
"C1"
"C3"
SBMP7MPI™ to Male BranchNPT Tee
4-4-4 SBMP7 1/4 1/4 1/4 - 18 2.76 1.63 1.63 1.13 .57 3/4 15,0004-4-6 SBMP7 1/4 3/8 3/8 -18 2.76 1.63 1.63 1.13 .57 3/4 12,0006-6-4 SBMP7 3/8 1/4 1/4 - 18 3.09 1.86 1.86 1.23 .57 7/8 12,5006-6-6 SBMP7 3/8 3/8 3/8 -18 3.09 1.86 1.86 1.23 .57 7/8 12,000
PARKERPART NO.
MPI™
SIZE #1
INCHES WORKINGPRESSURE
(PSIG)NPT
THR'D #2MPI™
SIZE #3 A C1 C2 C3 BW
TH'K
"D"TubeO.D.
MPI™ FittingsMPI™ Medium Pressure Fittings
Parker Hannifin CorporationInstrumentation Products DivisionHuntsville, Alabama
19
MPBFMPI™ Back Ferrule
PARKERPART NO.
TUBEO.D.
4 MPBF 1/4 0.406 MPBF 3/8 0.528 MPBF 1/2 0.729 MPBF 9/16 0.78
FERRULEO.D.
BMP7MPI™ Nut
PARKERPART NO.
MPI™
SIZE4 BMP7 1/4 0.81 9/166 BMP7 3/8 0.92 11/168 BMP7 1/2 0.97 15/169 BMP7 9/16 1.03 1
AW
HEX
"W"HEX
"A"
TubeO.D.
"D"
MPI™ Fitting Presetting Tool KitAn MPI™ Fitting hydraulic presetting tool kit for MPI™
Fittings ranging in size from 1/4” up to 9/16”, is avail-able to preset the ferrules on the tubing prior toassembly.
The kit includes a preset MPI™ Fitting head; anEnerpac hydraulic pump; the appropriate dies for thebody and nut; and a heavy duty carrying case.
When ordering the kit, be sure to specify the MPI™
Fitting presetting head.
(Size 4, 6, 9)
Inspection Gauge
Gaugeability ToolsMPIF Inspection GaugeThis one handy gauge works for all MPI™ sizes. Theend of the gauge checks the fitting gap and tubeinsertion after make-up.
For additional information about MPI™ Fittings, including specification and installation instructions, contact yourauthorized Parker Instrumentation Distributor or the Parker Hannifin Instrumentation Products Division at(256) 881-2040.
20 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
Two Way Inline Valves
9MP7-MPNLB-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNLB-T-SS316SS HT#XXXXX
12,500 PSI
"B"
"G"
"F"
"D""C"
"E"
"A" "H"
1/4" O.D. 4MP7-MPNLB-T-SS 15,000 4MP7 0.125 4.50 2.50 0.50 0.94 2.13 0.38 1.25 0.22 0.751/4" O.D. 4MF-MPNLB-T-SS 20,000 4MF 0.125 4.38 2.00 0.38 0.81 2.00 0.38 1.25 0.22 0.753/8" O.D. 6MP7-MPNLB-T-SS 15,000 6MP7 0.203 4.50 2.50 0.50 0.94 2.13 0.38 1.25 0.22 0.753/8" O.D. 6MF-MPNLB-T-SS 20,000 6MF 0.203 4.38 2.00 0.38 0.81 2.00 0.38 1.25 0.22 0.751/2" O.D. 8MP7-MPNLB-T-SS 12,500 8MF 0.313 6.26 3.00 0.63 1.25 3.00 0.50 1.38 0.34 1.00
9/16" O.D. 9MP7-MPNLB-T-SS 12,500 9MP7 0.313 6.26 3.00 0.63 1.25 3.00 0.50 1.38 0.34 1.009/16" O.D. 9MF-MPNLB-T-SS 20,000 9MF 0.313 6.13 2.50 0.50 1.13 2.88 0.50 1.38 0.34 1.003/4" O.D. 12MF-MPNLB-T-SS 20,000 12MF 0.438 7.00 3.00 0.75 1.50 3.75 0.63 1.75 0.44 1.383/4" O.D. 12MF-MPNLBH-T-SS 10,000 12MF 0.516 7.00 3.00 0.75 1.50 3.75 0.63 1.75 0.44 1.381" O.D. 16MF-MPNLB-T-SS 20,000 16MF 0.563 8.42 4.13 0.88 1.81 4.63 1.13 2.50 0.56 1.751" O.D. 16MF-MPNLBH-T-SS 10,000 16MF 0.688 8.42 4.13 0.88 1.81 4.63 1.13 2.50 0.56 1.75
1/8" NPT 2F-MPNLB-T-SS 15,000 1/8" NPTF 0.203 4.38 2.00 0.38 0.81 2.00 0.38 1.25 0.22 0.751/4" NPT 4F-MPNLB-T-SS 15,000 1/4" NPTF 0.203 4.38 2.00 0.38 0.81 2.00 0.38 1.25 0.22 0.753/8" NPT 6F-MPNLB-T-SS 15,000 3/8" NPTF 0.312 6.13 2.50 0.50 1.13 2.88 0.50 1.38 0.34 1.001/2" NPT 8F-MPNLB-T-SS 15,000 1/2" NPTF 0.312 6.38 2.63 0.75 1.38 3.13 0.50 1.38 0.34 1.503/4" NPT 12F-MPNLB-T-SS 10,000 3/4" NPTF 0.687 8.50 4.13 0.88 1.81 4.63 1.13 2.50 0.56 1.751" NPT 16F-MPNLB-T-SS 10,000 1" NPTF 0.687 8.50 4.13 0.88 1.81 4.63 1.13 2.50 0.56 1.75
TUBING PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
PIPE SIZE PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
IntroductionParker MPN series valves are designed for multi-turn control of media regulation and shutoff up to 20,000 psi. Additionalpacking materials are available for application temperatures from -300o to 800o F. Standard critical service design features,such as the packing below the thread and the non-rotating lower stem ensure longer valve life in rugged applications.
Materials of Construction
1 Soc Set Screw Steel2 Handle Aluminum3 Upper Stem Assembly 17-4PH4 Packing Gland 316SS5 Locking Device 300 SER. SS6 10-32 X 1/4 Fill HD SCR. 300 SER. SS7 Stem Pin 304SS8 Top Packing Washer 416SS9 Packing Teflon®
10 Bottom Packing Washer 316SS11 Lower Stem 17-4PH-H90012 Body 316SS
Item # Description Material
1 2
3
4
5
8
9
1011
12
6
7
MPI™ FittingsMedium Pressure Valves
21 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
Two Way Angle Valves
1/4" O.D. 4MP7-MPNAB-T-SS 15,000 4MP7 0.125 5.02 2.50 - 1.38 2.57 0.38 1.25 0.22 0.751/4" O.D. 4MF-MPNAB-T-SS 20,000 4MF 0.125 4.81 2.00 - 1.25 2.44 0.38 1.25 0.22 0.753/8" O.D. 6MP7-MPNAB-T-SS 15,000 6MP7 0.203 5.02 2.50 - 1.38 2.57 0.38 1.25 0.22 0.753/8" O.D. 6MF-MPNAB-T-SS 20,000 6MF 0.203 4.81 2.00 - 1.25 2.44 0.38 1.25 0.22 0.751/2" O.D. 8MP7-MPNAB-T-SS 12,500 8MP7 0.313 6.84 3.00 - 1.83 3.58 0.50 1.38 0.34 1.00
9/16" O.D. 9MP7-MPNAB-T-SS 12,500 9MP7 0.313 6.84 3.00 - 1.83 3.58 0.50 1.38 0.34 1.009/16" O.D. 9MF-MPNAB-T-SS 20,000 9MF 0.313 6.63 2.50 - 1.63 3.38 0.50 1.38 0.34 1.003/4" O.D. 12MF-MPNAB-T-SS 20,000 12MF 0.438 7.50 3.00 - 2.00 4.25 0.63 1.75 0.44 1.383/4" O.D. 12MF-MPNABH-T-SS 10,000 12MF 0.516 7.50 3.00 - 2.00 4.25 0.63 1.75 0.44 1.381" O.D. 16MF-MPNAB-T-SS 20,000 16MF 0.563 9.38 4.13 - 2.56 5.44 1.13 2.50 0.56 1.751" O.D. 16MF-MPNABH-T-SS 10,000 16MF 0.688 9.38 4.13 - 2.56 5.44 1.13 2.50 0.56 1.75
1/8" NPT 2F-MPNAB-T-SS 15,000 1/8" NPTF 0.203 4.81 2.00 - 1.25 2.44 0.38 1.25 0.22 0.751/4" NPT 4F-MPNAB-T-SS 15,000 1/4" NPTF 0.203 4.81 2.00 - 1.25 2.44 0.38 1.25 0.22 0.753/8" NPT 6F-MPNAB-T-SS 15,000 3/8" NPTF 0.312 6.50 2.50 - 1.50 3.25 0.50 1.38 0.34 1.001/2" NPT 8F-MPNAB-T-SS 15,000 1/2" NPTF 0.312 6.50 2.63 - 1.50 3.25 0.50 1.38 0.34 1.503/4" NPT 12F-MPNAB-T-SS 10,000 3/4" NPTF 0.687 9.00 4.13 - 2.31 5.13 1.13 2.50 0.56 1.751" NPT 16F-MPNAB-T-SS 10,000 1" NPTF 0.687 9.00 4.13 - 2.31 5.13 1.13 2.50 0.56 1.75
TUBING PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
PIPE SIZE PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
316SS HT#XXXXX9MP7-MPNAB-T-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPNAB-T-SS
12,500 PSI
"B"
"G"
"F"
"D"
"E"
"A""H"
22 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
Three Way/Two PressureConnections
Three Way/One PressureConnection
1/4" O.D. 4MP7-MPNXBI-T-SS 15,000 4MP7 0.125 5.21 2.50 1.21 1.65 2.84 0.38 1.25 0.22 0.751/4" O.D. 4MF-MPNXBI-T-SS 20,000 4MF 0.125 5.00 2.00 1.00 1.44 2.63 0.38 1.25 0.22 0.753/8" O.D. 6MP7-MPNXBI-T-SS 15,000 6MP7 0.203 5.21 2.50 1.21 1.65 2.84 0.38 1.25 0.22 0.753/8" O.D. 6MF-MPNXBI-T-SS 20,000 6MF 0.203 5.00 2.00 1.00 1.44 2.63 0.38 1.25 0.22 0.751/2" O.D. 8MP7-MPNXBI-T-SS 12,500 8MP7 0.313 7.09 3.00 1.50 2.12 3.88 0.50 1.38 0.34 1.00
9/16" O.D. 9MP7-MPNXBI-T-SS 12,500 9MP7 0.313 7.09 3.00 1.50 2.12 3.88 0.50 1.38 0.34 1.009/16" O.D. 9MF-MPNXBI-T-SS 20,000 9MF 0.313 6.88 2.50 1.25 1.88 3.63 0.50 1.38 0.34 1.003/4" O.D. 12MF-MPNXBI-T-SS 20,000 12MF 0.438 7.88 3.00 2.63 2.38 4.63 0.63 1.75 0.44 1.383/4" O.D. 12MF-MPNXBIH-T-SS 10,000 12MF 0.516 7.88 3.00 2.63 2.38 4.63 0.63 1.75 0.44 1.381" O.D. 16MF-MPNXBI-T-SS 20,000 16MF 0.563 9.75 4.13 2.13 3.06 5.88 1.13 2.50 0.56 1.751" O.D. 16MF-MPNXBIH-T-SS 10,000 16MF 0.688 9.75 4.13 2.13 3.06 5.88 1.13 2.50 0.56 1.75
TUBING PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
1/4" O.D. 4MP7-MPNXBO-T-SS 15,000 4MP7 0.125 5.02 2.50 1.38 1.38 2.57 0.38 1.25 0.22 0.751/4" O.D. 4MF-MPNXBO-T-SS 20,000 4MF 0.125 4.81 2.00 1.25 1.25 2.44 0.38 1.25 0.22 0.753/8" O.D. 6MP7-MPNXBO-T-SS 15,000 6MP7 0.203 5.02 2.50 1.38 1.38 2.57 0.38 1.25 0.22 0.753/8" O.D. 6MF-MPNXBO-T-SS 20,000 6MF 0.203 4.81 2.00 1.25 1.25 2.44 0.38 1.25 0.22 0.751/2" O.D. 8MP7-MPNXBO-T-SS 12,500 8MP7 0.313 6.84 3.00 1.88 1.88 3.63 0.50 1.38 0.34 1.00
9/16" O.D. 9MP7-MPNXBO-T-SS 12,500 9MP7 0.313 6.84 3.00 1.88 1.88 3.63 0.50 1.38 0.34 1.009/16" O.D. 9MF-MPNXBO-T-SS 20,000 9MF 0.313 6.63 2.50 1.63 1.63 3.38 0.50 1.38 0.34 1.003/4" O.D. 12MF-MPNXBO-T-SS 20,000 12MF 0.438 7.50 3.00 2.00 2.00 4.25 0.63 1.75 0.44 1.383/4" O.D. 12MF-MPNXBOH-T-SS 10,000 12MF 0.516 7.50 3.00 2.00 2.00 4.25 0.63 1.75 0.44 1.381" O.D. 16MF-MPNXBO-T-SS 20,000 16MF 0.563 9.38 4.13 2.63 2.63 5.44 1.13 2.50 0.56 1.751" O.D. 16MF-MPNXBOH-T-SS 10,000 16MF 0.688 9.38 4.13 2.63 2.63 5.44 1.13 2.50 0.56 1.75
TUBING PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
12,500 PSI316SS HT#XXXXX
9MP7-MPNXBI-T-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPNXBI-T-SS
"B"
"G"
"F"
"D""C"
"E"
"A"
"H"
9MP7-MPNXBO-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNXBO-T-SS316SS HT#XXXXX
12,500 PSI
"B"
"G"
"F"
"D""C"
"E"
"A""H"
MPI™ FittingsMedium Pressure Valves
23 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
Three Way/Two StemConnection
Two Way Angle Valves(Replaceable Seat)
1/4" O.D. 4MP7-MPNXBD-T-SS 15,000 4MP7 0.125 5.75 2.50 1.70 1.19 3.38 0.38 1.25 0.22 0.751/4" O.D. 4MF-MPNXBD-T-SS 20,000 4MF 0.125 5.75 2.00 1.69 1.19 3.38 0.38 1.25 0.22 0.753/8" O.D. 6MP7-MPNXBD-T-SS 15,000 6MP7 0.203 5.75 2.50 1.70 1.19 3.38 0.38 1.25 0.22 0.753/8" O.D. 6MF-MPNXBD-T-SS 20,000 6MF 0.203 5.75 2.00 1.69 1.19 3.38 0.38 1.25 0.22 0.751/2" O.D. 8MP7-MPNXBD-T-SS 12,500 8MP7 0.313 8.38 3.00 2.56 1.75 5.13 0.50 1.38 0.34 1.00
9/16" O.D. 9MP7-MPNXBD-T-SS 12,500 9MP7 0.313 8.38 3.00 2.56 1.75 5.13 0.50 1.38 0.34 1.009/16" O.D. 9MF-MPNXBD-T-SS 20,000 9MF 0.313 8.38 2.50 2.56 1.75 5.13 0.50 1.38 0.34 1.003/4" O.D. 12MF-MPNXBD-T-SS 20,000 12MF 0.438 9.75 3.00 3.25 2.25 6.50 0.63 1.75 0.44 1.383/4" O.D. 12MF-MPNXBDH-T-SS 10,000 12MF 0.516 9.75 3.00 3.25 2.25 6.50 0.63 1.75 0.44 1.381" O.D. 16MF-MPNXBD-T-SS 20,000 16MF 0.563 12.19 4.13 4.13 2.81 8.25 1.13 2.50 0.56 1.751" O.D. 16MF-MPNXBDH-T-SS 10,000 16MF 0.688 12.19 4.13 4.13 2.81 8.25 1.13 2.50 0.56 1.75
TUBING PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
1/4" O.D. 4MP7-MPNABR-T-SS 15,000 4MP7 0.125 5.87 2.50 - 1.38 2.57 0.38 1.25 0.22 0.751/4" O.D. 4MF-MPNABR-T-SS 20,000 4MF 0.125 5.63 2.00 - 1.25 2.44 0.38 1.25 0.22 0.753/8" O.D. 6MP7-MPNABR-T-SS 15,000 6MP7 0.203 5.87 2.50 - 1.38 2.57 0.38 1.25 0.22 0.753/8" O.D. 6MF-MPNABR-T-SS 20,000 6MF 0.203 5.63 2.00 - 1.25 2.44 0.38 1.25 0.22 0.751/2" O.D. 8MP7-MPNABR-T-SS 12,500 8MP7 0.313 8.25 3.00 - 2.00 3.63 0.50 1.38 0.34 1.00
9/16" O.D. 9MP7-MPNABR-T-SS 12,500 9MP7 0.313 8.25 3.00 - 2.00 3.63 0.50 1.38 0.34 1.009/16" O.D. 9MF-MPNABR-T-SS 20,000 9MF 0.313 8.00 0.17 - 1.63 3.38 0.50 1.38 0.34 1.003/4" O.D. 12MF-MPNABR-T-SS 20,000 12MF 0.438 8.88 3.00 - 2.00 4.25 0.63 1.75 0.44 1.383/4" O.D. 12MF-MPNABRH-T-SS 10,000 12MF 0.516 8.88 3.00 - 2.00 4.25 0.63 1.75 0.44 1.381" O.D. 16MF-MPNABR-T-SS 20,000 16MF 0.563 11.13 4.13 - 2.56 5.44 1.13 2.50 0.56 1.751" O.D. 16MF-MPNABRH-T-SS 10,000 16MF 0.688 11.13 4.13 - 2.56 5.44 1.13 2.50 0.56 1.75
TUBING PARKER PART NO. TH'KPSI CONNECTION ORIFICE A B C D E F G H
9MP7-MPNXBD-T-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPNXBD-T-SS316SS HT#XXXXX
12,500 PSI
"B"
"G" "F"
"D"
"D"
"C"
"C"
"E""A"
"H"
12,500 PSI316SS HT#XXXXX
9MP7-MPNABR-T-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPNABR-T-SS
"B "
"G"
"F"
"D"
"E"
"A"
"H"
24 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
Two WayBall Valves
1/8" O.D. 2F-MPBLPK-V-SSP 15,000 1/8" NPT 0.187 0.187 1.45 4.631/4" O.D. 4F-MPBLPK-V-SSP 15,000 1/4" NPT 0.187 0.187 1.45 4.631/4" O.D. 4MP7-MPBLPK-V-SSP 15,000 4MP7 0.187 0.125 0.45 5.001/4" O.D. 4MF-MPBLPK-V-SSP 20,000 4MF 0.187 0.109 0.31 4.633/8" O.D. 6F-MPBLPK-V-SSP 15,000 3/8" NPT 0.187 0.187 1.45 4.653/8" O.D. 6MP7-MPBLPK-V-SSP 15,000 6MP7 0.187 0.187 1.45 5.003/8" O.D. 6MF-MPBLPK-V-SSP 20,000 6MF 0.187 0.187 1.45 4.631/2" O.D. 8MP7-MPBLPK-V-SSP 12,500 8MP7 0.187 0.187 1.45 5.50
9/16" O.D. 9MP7-MPBLPK-V-SSP 12,500 9MP7 0.187 0.187 1.45 5.509/16" O.D. 9MF-MPBLPK-V-SSP 20,000 9MF 0.187 0.187 1.45 5.13
1/4" O.D. 4F-MPBLPKH-V-SSP 15,000 1/4" NPT 0.375 0.25 2.70 5.633/8" O.D. 6F-MPBLPKH-V-SSP 15,000 3/8" NPT 0.375 0.375 6.08 5.633/8" O.D. 6MP7-MPBLPKH-V-SSP 15,000 6MP7 0.375 0.25 2.70 5.981/2" O.D. 8F-MPBLPKH-V-SSP 15,000 1/2" NPT 0.375 0.375 6.08 5.631/2" O.D. 8MP7-MPBLPKH-V-SSP 12,500 8MP7 0.375 0.359 5.82 6.44
9/16" O.D. 9MP7-MPBLPKH-V-SSP 12,500 9MP7 0.375 0.359 5.82 6.449/16" O.D. 9MF-MPBLPK-V-SSP 15,000 9MF 0.375 0.312 4.22 6.253/4" O.D. 12MF-MPBLPKH-V-SSP 15,000 12MF 0.375 0.375 6.08 6.671" O.D. 16MF-MPBLPKH-V-SSP 15,000 16MF 0.375 0.375 6.08 7.45
TUBING PARKER PART NO. PSI CONNECTION ORIFICE MINIMUM ORIFICE Cv A
HT#XXXXXHT#XXXXX
12,500 PSI316SS HT#XXXXX
9MP7-MPBLPK-V-SSP
12,500 PSI316SS HT#XXXXX
9MP7-MPBLPK-V-SSP
HT#XXXXXHT#XXXXX
"A"2.83
3.840.81
2.13
0.44
1.50
4.63
.259/32 OMOUNTINGHOLES
PANEL MOUNT HOLE 1.0621.50 THICK
BLOCK
IntroductionParker MPB series manually, pneumatically and electrically actuated 2-way and 3-way ball valves are designed for 1/4 and1/2 turn media shutoff or switching applications up to 20,000 psi. Our trunion style ball design and spring loaded seats makethe MPB series ideal for severe service applications. The end connector design enables a variety of end connections andcombinations for specific customer applications.
HT#XXXXXHT#XXXXXHT#XXXXXHT#XXXXX
12,500 PSI316SS HT#XXXXX
9MP7-MPBLPKH-V-SSP
12,500 PSI316SS HT#XXXXX
9MP7-MPBLPKH-V-SSP
4.08
"A"3.63
1.00
2.38
0.56
2.00
4.63
.259/32 OMOUNTINGHOLES
PANEL MOUNT HOLE 1.0621.750THICK
BLOCK
MPI™ FittingsMedium Pressure Valves
25 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
Three WayBall Valves
1/8" O.D. 2F-MPBXPKD-V-SSP 2F-MPBXPK-V-SSP 15,000 1/8" NPT 0.187 0.187 0.71 4.63 0.51/4" O.D. 4F-MPBXPKD-V-SSP 4F-MPBXPK-V-SSP 15,000 1/4" NPT 0.187 0.187 0.71 4.63 1.061/4" O.D. 4MP7-MPBXPKD-V-SSP 4MP7-MPBXPK-V-SSP 15,000 4MP7 0.187 0.125 0.18 5.00 1.181/4" O.D. 4MF-MPBXPKD-V-SSP 4MF-MPBXPK-V-SSP 20,000 4MF 0.187 0.109 0.15 4.63 13/8" O.D. 6F-MPBXPKD-V-SSP 6F-MPBXPK-V-SSP 15,000 3/8" NPT 0.187 0.187 0.71 4.65 1.063/8" O.D. 6MP7-MPBXPKD-V-SSP 6MP7-MPBXPK-V-SSP 15,000 6MP7 0.187 0.187 0.71 5.00 1.183/8" O.D. 6MF-MPBXPKD-V-SSP 6MF-MPBXPK-V-SSP 20,000 6MF 0.187 0.187 0.71 4.63 11/2" O.D. 8MP7-MPBXPKD-V-SSP 8MP7-MPBXPK-V-SSP 12,500 8MP7 0.187 0.187 0.71 5.50 1.44
9/16" O.D. 9MP7-MPBXPKD-V-SSP 9MP7-MPBXPK-V-SSP 12,500 9MP7 0.187 0.187 0.71 5.50 1.449/16" O.D. 9MF-MPBXPKD-V-SSP 9MF-MPBXPK-V-SSP 20,000 9MF 0.187 0.187 0.71 5.13 1.25
1/4" O.D. 4F-MPBXPKDH-V-SSP 4F-MPBXPKH-V-SSP 15,000 1/4" NPT 0.375 0.25 1.07 5.63 1.063/8" O.D. 6F-MPBXPKDH-V-SSP 6F-MPBXPKH-V-SSP 15,000 3/8" NPT 0.375 0.375 2.40 5.63 1.063/8" O.D. 6MP7-MPBXPKDH-V-SSP 6MP7-MPBXPKH-V-SSP 15,000 6MP7 0.375 0.25 1.07 5.98 1.271/2" O.D. 8F-MPBXPKDH-V-SSP 8F-MPBXPKH-V-SSP 15,000 1/2" NPT 0.375 0.375 2.40 5.63 1.061/2" O.D. 8MP7-MPBXPKDH-V-SSP 8MP7-MPBXPKH-V-SSP 12,500 8MP7 0.375 0.359 2.30 6.44 1.37
9/16" O.D. 9MP7-MPBXPKDH-V-SSP 9MP7-MPBXPKH-V-SSP 12,500 9MP7 0.375 0.359 2.30 6.44 1.379/16" O.D. 9MF-MPBXPKD-V-SSP 9MF-MPBXPK-V-SSP 15,000 9MF 0.375 0.312 1.67 6.25 1.063/4" O.D. 12MF-MPBXPKDH-V-SSP 12MF-MPBXPKH-V-SSP 15,000 12MF 0.375 0.375 2.40 6.67 1.181" O.D. 16MF-MPBXPKDH-V-SSP 16MF-MPBXPKH-V-SSP 15,000 16MF 0.375 0.375 2.40 7.45 1.99
TUBING 3-WAY 90 DEGREES 3-WAY 180 DEGREES PSI CONNECTION ORIFICE A BCvMINIMUM ORIFICE
HT#XXXXXHT#XXXXXHT#XXXXXHT#XXXXX
HT
#XX
XX
XH
T#X
XX
XX
9MP7-MPBXPK-V-SSP316SS HT#XXXXX
12,500 PSI
9MP7-MPBXPK-V-SSP316SS HT#XXXXX
12,500 PSI
"A"2.83
3.840.81
2.13
"B"
1.50
4.63
.259/32 OMOUNTINGHOLES
PANEL MOUNT HOLE 1.0621.50THICK
BLOCK
HT#XXXXXHT#XXXXX
HT
#XX
XX
XH
T#X
XX
XX
HT#XXXXXHT#XXXXX
12,500 PSI316SS HT#XXXXX
9MP7-MPBXPKH-V-SSP
12,500 PSI316SS HT#XXXXX
9MP7-MPBXPKH-V-SSP
"A"3.63
4.08 1.00
2.38
"B"
2.00
4.63
.259/32 OMOUNTINGHOLES
PANEL MOUNT HOLE 1.0621.750THICK
BLOCK
Materials of Construction
1 Handle 300 SER. SS2 Set Screw 17-4PH-H9003 Stop Collar, 180 Degree 300 SER. SS4 Stem 17-4PH-H9005 Panel Nut 300 SER. SS6 Bearing Washer Peek/30% Glass7 O-ring Viton®
8 Back Up Ring Teflon®
9 Ball Seat Assembly 316SS/Arlon10 Belleville Washer 302SS11 Packing Washer 316SS12 Back Up Washer Teflon®
13 Body Bushing Ampco 4514 Trunion, 180 Degree 316SS15 Bottom Bushing Ampco 4516 Body 316SS17 O-ring Viton®
18 O-ring Viton®
19 Seat Gland 316SS20 Bottom Gland 316SS
Item # Description Material2
3
5
19
18 20
16
17
4 1
711
79
10 15 14
12
7
13
6
8
26 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
IntroductionParker MPF series filters utilize sintered stainless steel filter discs to trap particles from 0.5 to 100 micron sizes. Inline filtershelp protect valuable equipment in the process line.
Inline Filters
HT#XXXXXHT#XXXXX HT#XXXXXHT#XXXXX12,500 PSI316SS HT#XXXXX9MP7-MPFL-40-SS
12,500 PSI316SS HT#XXXXX9MP7-MPFL-40-SS
LENGTH
Materials of Construction
1 Cap 316SS2 Sealing 316SS3 Body 316SS4 Spacer 316SS5 100 Micron Filter Disc 316SS6 O-ring Teflon
Item # Description Material
1/4" O.D. 4MP7-MPFL-100-SS 15,000 4MP7 0.125 5.25 1.38 * * * * * *1/4" O.D. 4MF-MPFL-100-SS 20,000 4MF 0.125 5.25 1.38 * * * * * *3/8" O.D. 6MP7-MPFL-100-SS 15,000 6MP7 0.219 5.25 1.38 * * * * * *3/8" O.D. 6MF-MPFL-100-SS 20,000 6MF 0.219 5.25 1.38 * * * * * *1/2" O.D. 8MP7-MPFL-100-SS 12,500 8MP7 0.359 5.25 1.38 * * * * * *
9/16" O.D. 9MP7-MPFL-100-SS 12,500 9MP7 0.359 5.25 1.38 * * * * * *9/16" O.D. 9MF-MPFL-100-SS 20,000 9MF 0.359 5.25 1.38 * * * * * *
TUBING PARKER PART NO. 100PSI CONNECTION ORIFICE LENGTH TH'K 0.05 2 5 10 40
FILTER MICRON SIZE AVAILABLE
5
34
1 6 3
2
MPI™ FittingsMedium Pressure Valves
27 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
Ball Check Valves
1/4" O.D. 4MP7-MPCBL-5-SS 15,000 4MP7 0.125 3.75 1.001/4" O.D. 4MF-MPCBL-5-SS 20,000 4MF 0.125 3.75 1.003/8" O.D. 6MP7-MPCBL-5-SS 15,000 6MP7 0.219 3.75 1.003/8" O.D. 6MF-MPCBL-5-SS 20,000 6MF 0.219 3.75 1.001/2" O.D. 8MP7-MPCBL-5-SS 12,500 8MP7 0.359 4.50 1.389/16" O.D. 9MP7-MPCBL-5-SS 12,500 9MP7 0.359 4.50 1.389/16" O.D. 9MF-MPCBL-5-SS 20,000 9MF 0.359 4.50 1.383/4" O.D. 12MF-MPCBL-5-SS 20,000 12MF 0.438 5.13 1.751" O.D. 16MF-MPCBL-5-SS 20,000 16MF 0.563 6.50 2.50
TUBING PARKER PART NO. PSI CONNECTION ORIFICE LENGTH TH'K
12,500 PSI316SS HT#XXXXX
9MP7-MPCBL-5-SS
12,500 PSI316SS HT#XXXXX
9MP7-MPCBL-5-SS
HT#XXXXXHT#XXXXX
LENGTH
IntroductionParker MPC and MPCB series check valves are designed for uni-directional flow control of fluids and gases up to 20,000 psi.
Materials of Construction
1 Cap 316SS2 Body 316SS3 3/8 Ball 316SS4 Gasket 316SS5 Ball Support 316SS6 Spring 316SS
Item # Description Material
3 5 6
4
21
28 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
Check Valves
Materials of Construction
1 Cap 316SS2 Body 316SS3 O-ring Buna4 Gasket 316SS5 Poppet 316SS6 Spring 316SS
Item # Description Material
HT#XXXXXHT#XXXXX
9MP7-MPCL-5-V-SS316SS HT#XXXXX
12,500 PSI
9MP7-MPCL-5-V-SS316SS HT#XXXXX
12,500 PSI
LENGTH
1/4" O.D. 4MP7-MPCL-5-V-SS 15,000 4MP7 0.125 3.75 1.001/4" O.D. 4MF-MPCL-5-V-SS 20,000 4MF 0.125 3.75 1.003/8" O.D. 6MP7-MPCL-5-V-SS 15,000 6MP7 0.219 3.75 1.003/8" O.D. 6MF-MPCL-5-V-SS 20,000 6MF 0.219 3.75 1.001/2" O.D. 8MP7-MPCL-5-V-SS 12,500 8MP7 0.359 4.50 1.38
9/16" O.D. 9MP7-MPCL-5-V-SS 12,500 9MP7 0.359 4.50 1.389/16" O.D. 9MF-MPCL-5-V-SS 20,000 9MF 0.359 4.50 1.383/4" O.D. 12MF-MPCL-5-V-SS 20,000 12MF 0.438 5.13 1.751" O.D. 16MF-MPCL-5-V-SS 20,000 16MF 0.563 6.50 2.50
TUBING PARKER PART NO. PSI CONNECTION ORIFICE LENGTH TH'K
32
4 5
6 1
MPI™ FittingsMedium Pressure Valves
29 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
Relief Valves (Factory Set)
8M8F-MPRA-****-SS 1,500 to 2,999 1/2" M X F NPT 0.250 138M8F-MPRA-****-SS 3,000 to 10,999 1/2" M X F NPT 0.250 259HF8F-MPRA-****-SS 11,000 to 20,999 9HF X 1/2" NPTF 0.188 20
PARKER PART NO. PRESSURE RATING CONNECTION ORIFICE MAX FLOW CAPACITY (GPM)
IntroductionParker MPR series relief valves are offered in preset pressure relief ranges from 1500 to 20,999 psi. Relief valves are taggedwith the proper factory preset pressures.
Materials of ConstructionItem # Description Material
1 1 Cap 303SS2 1 5/8-11 X 3 Soc Set Scr 304SS3 1 Pressure Rating Tag 300 Ser. SS4 1 Nut 303SS5 2 Spring Seat 304SS6 2 5/16 Ball 316SS7 1 Spring Housing 304SS8 1 O-Ring Viton®
9 1 Stem 17-4PH-H115010 1 Body 316SS11 1 Removable Seat Gland 316SS
Seal Ring 1500 to 2999 316SS13 1 Seal Ring 3000 to 10999 316SS
Seal Ring 11000 to 20999 316SS14 1 Danly Spring Steel15 1 Stem Seat 17-4PH-H900
Qty
1.94
2.50
13.00
14.19
14
1 2 4
5 89 10 1115 13
9HF
1/2 NPT
5 7 66
30 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
Bulkhead Union
Medium Pressure Elbows
1/4" O.D. 4MFBU-SS 20,000 4MF 0.125 1.88 1 3/4” - 163/8" O.D. 6MFBU-SS 20,000 6MF 0.219 2.00 1 7/8” - 14
9/16" O.D. 9MFBU-SS 20,000 9MF 0.359 2.38 1 3/8 1 1/16” - 123/4" O.D. 12MFBU-SS 20,000 12MF 0.516 2.63 1 7/8 1 5/8” - 121" O.D. 16MFBU-SS 20,000 16MF 0.688 3.50 2 1/8 1 7/8” - 12
TUBING PARKER PART NO. PSI CONNECTION ORIFICE LENGTH HEX MOUNTING THREAD
1/4" O.D. 4MFL-SS 20,000 4MF 1.19 1.00 0.88 0.69 0.633/8" O.D. 6MFL-SS 20,000 6MF 1.38 1.38 1.00 1.00 0.75
9/16" O.D. 9MFL-SS 20,000 9MF 1.75 1.75 1.25 1.25 1.003/4" O.D. 12MFL-SS 20,000 12MF 2.25 2.25 1.50 1.50 1.381" O.D. 16MFL-SS 20,000 16MF 3.00 3.00 2.06 2.06 1.75
TUBING PARKER PART NO. PSI CONNECTION F G H TH’KE
F
G
E
H
Union Couplings
1/4" O.D. 4MFU-SS 20,000 4MF 0.125 1.56 5/83/8" O.D. 6MFU-SS 20,000 6MF 0.219 1.75 3/4
9/16" O.D. 9MFU-SS 20,000 9MF 0.359 2.13 13/4" O.D. 12MFU-SS 20,000 12MF 0.516 2.50 1 3/81" O.D. 16MFU-SS 20,000 16MF 0.688 3.50 1 3/4
TUBING PARKER PART NO. PSI CONNECTION ORIFICE LENGTH HEX
MPI™ FittingsMedium Pressure Valves
31 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
Medium Pressure Tees
Medium Pressure Crosses
1/4" O.D. 4MFT-SS 20,000 4MF 1.75 1.00 0.88 0.69 0.633/8" O.D. 6MFT-SS 20,000 6MF 2.00 1.38 1.00 1.00 0.75
9/16" O.D. 9MFT-SS 20,000 9MF 2.50 1.75 1.25 1.25 1.003/4" O.D. 12MFT-SS 20,000 12MF 3.00 2.25 1.50 1.50 1.381" O.D. 16MFT-SS 20,000 16MF 4.13 3.00 2.06 2.06 1.75
TUBING PARKER PART NO. PSI CONNECTION F G H TH’KE
1/4" O.D. 4MFX-SS 20,000 4MF 1.75 1.75 0.88 0.69 0.633/8" O.D. 6MFX-SS 20,000 6MF 2.00 2.00 1.00 1.00 0.75
9/16" O.D. 9MFX-SS 20,000 9MF 2.50 2.50 1.25 1.25 1.003/4" O.D. 12MFX-SS 20,000 12MF 3.00 3.00 1.50 1.50 1.381" O.D. 16MFX-SS 20,000 16MF 4.13 4.13 2.06 2.06 1.75
TUBING PARKER PART NO. PSI CONNECTION F G H TH’KE
Connection Components
F
G
E
H
F
G
E
H
4MFG-SS 1/4" O.D.6MFG-SS 3/8" O.D.9MFG-SS 9/16" O.D.12MFG-SS 3/4" O.D.16MFG-SS 1" O.D.
TUBINGPARKER PART NO.
Gland
4MFP-SS 1/4" O.D.6MFP-SS 3/8" O.D.9MFP-SS 9/16" O.D.
12MFP-SS 3/4" O.D.16MFP-SS 1" O.D.
TUBINGPARKER PART NO.
Plug
4MFC-SS 1/4" O.D.6MFC-SS 3/8" O.D.9MFC-SS 9/16" O.D.
12MFC-SS 3/4" O.D.16MFC-SS 1" O.D.
TUBINGPARKER PART NO.
Collar
32 Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
MPI™ FittingsMedium Pressure Valves
Caps
1/4" O.D. 4MFCP-SS 20,000 4MF 0.88 5/83/8" O.D. 6MFCP-SS 20,000 6MF 1.38 3/4
9/16" O.D. 9MFCP-SS 20,000 9MF 1.50 13/4" O.D. 12MFCP-SS 20,000 12MF 2.50 1 3/81" O.D. 16MFCP-SS 20,000 16MF 3.00 1 3/4
TUBING PARKER PART NO. PSI CONNECTION LENGTH HEX
Medium Pressure Anti-VibrationGland Assemblies
Anti-Vibration Component Part Numbers
1/4" O.D. 4MFAVSC-SS 4MFAVCG-SS 4MFAVCB-SS 4MFAVC-SS3/8" O.D. 6MFAVSC-SS 6MFAVCG-SS 6MFAVCB-SS 6MFAVC-SS
9/16" O.D. 9MFAVSC-SS 9MFAVCG-SS 9MFAVCB-SS 9MFAVC-SS3/4" O.D. 12MFAVSC-SS 12MFAVCG-SS 12MFAVCB-SS 12MFAVC-SS1" O.D. 16MFAVSC-SS 16MFAVCG-SS 16MFAVCB-SS 16MFAVC-SS
TUBING SLOTTED COLLET COLLET GLAND COLLET BODY COLLAR
1/4" O.D. 4MFAVGA-SS 20,000 4MF 0.63 0.50 1.443/8" O.D. 6MFAVGA-SS 20,000 6MF 0.75 0.63 1.63
9/16" O.D. 9MFAVGA-SS 20,000 9MF 1.00 0.88 1.883/4" O.D. 12MFAVGA-SS 20,000 12MF 1.25 1.13 2.131" O.D. 16MFAVGA-SS 20,000 16MF 1.50 1.38 2.50
TUBING PARKER PART NO. PSI CONNECTION A B C
"C""A"
"B"
2
1 3 4
Materials of ConstructionItem # Description
1 1 Collet Gland 316SS2 1 Slotted Collet 316SS3 1 Collet Body 316SS4 1 Collar 316SS
Qty Material
MPI™ FittingsMedium Pressure Ball Valves
Medium Pressure Regulators
33 Parker Hannifin CorporationVeriflo DivisionRichmond, California
Parker Hannifin CorporationInstrumentation Products DivisionJacksonville, Alabama
IntroductionParker HB4 Series Ball Valves are engineered and manufactured to provide reliable shut-off or switching functions. Theircompact and rugged design incorporates spring-loaded seats for high cycle life and low operating torques at pressures up to10,000 psi (689 bar). Every HB4 Series Ball Valve is manufactured with Parker SUPARCASE® trunnions and ball to resistcorrosion, seizures, and particle abrasion.
SPECIFICATIONS:
Pressure rating: 10,000 psi (689 bar) CWPwith PEEK (PKR) Seats;6,000 psi (414 bar) CWPwith PCTFE (K) Seats
Temperature rating: -65 ˚F to 400 ˚F (-54 ˚C to204 ˚C)
Body material: Stainless SteelBody configurations: Two-way and Three-way
For additional information about the HB Series of Ball Valves, including flow data and pressure ratings, see Catalog4121-HB or contact your authorized Parker Instrumentation Distributor or the Parker Hannifin Instrumentation ProductsDivision at (256) 435-2130.
FLOW DATA:
Two-way HB4L: Cv = 1.02; xT = 0.42; Orifice = 0.188" (4.8 mm)
Three-way HB4X: Cv = 0.62; xT = 0.71; Orifice = 0.188" (4.8 mm)
Tested in accordance with ISA S75.02. Gas flow will be choked when P1 - P2 / P1 = xT .
4MP7-HB4LPKR-SSP
1/4" O.D. HB4PKR-SSP 4MP7-HB4XPKR-SSP3/8" O.D. HB6PKR-SSP 6MP7-HB4XPKR-SSP
9/16" O.D. HB9PKR-SSP 9MP7-HB4XPKR-SSP
TUBING PARKER PART NO. 2-WAY
FUNCTIONAL PERFORMANCE:
Design Proof Pressure:316L Stainless Steel 15,000 psi (1035 barg)
Design Burst Pressure:316L Stainless Steel 30,000 psi (2070 barg)
Design Leak Rate:Across Seat 1 x 10-4 scc/sec HeInboard 1 x 10-4 scc/sec HeOutboard 1 x 10-4 scc/sec He
Flow Capacity Cv .07(SEMI Flow Coefficient Test #F-32-0998)
Internal Volume:Self-Relieving 0.853 in3 (13.99 cm3)Non-Self-Relieving 0.831 in3 (13.62 cm3)
Standard Connections:1/8 NPT, 1/4 NPT
Approximate Weight:6.5 lbs (3kg)
IntroductionParker Hannifin XPR Series Medium Pressure Regulators safely reduce pressures from 10,000psi inlet down to as low as 50 psi by utilizing seven different ranges. A new self-relieving feature isstandard on all XPR Series regulators. For additional information about the XPR Series MediumPressure Regulator, including specifications for inlet pressure and construction, see Catalog 4511or contact your authorized Parker Instrumentation Distributor or the Parker Hannifin VerifloDivision at (510) 235-9590.
XPRSeries
XPRS1002P6010040T
Ordering Information
BASIC SERIESXPR
O
RANGERange Outlet Gauge40 = 200 psig to 4000 psig 0 - 6000 psi60 = 300 psig to 6000 psig 0 - 6000 psi100 = 500 psig to 10000 psig* 0 - 10000 psi
XPR
PORTING2P = 2 Ports3P = 3 Ports4P = 4 Ports4PB = 4 Ports
•Stainless Steel material only
OPTIONSN = Non-Self RelievingT = Tee Bar Handle
O-RING MATERIALO = Viton®
PORT STYLE2 = 1/8” NPT4 = 1/4” NPT6 = 3/8” NPT
OUTLET GAUGE6 = 0 - 600 psig10 = 0 - 1000 psig20 = 0 - 2000 psig30 = 0 - 3000 psig60 = 0 - 6000 psig100 = 0 - 10000 psig
INLET GAUGE60 = 0 - 6000 psig(standard for 40 & 60 poly)
100 = 0 - 10000 psig(standard for 100)
MATERIALS = 316L Stainless Steel(10000 psig max)
Note: PANEL MOUNT OPTION:Order Panel Nut Ring P/N 40400440as separate line item.
PARKER PART NO. 3-WAY
Viton® is a registered trademark of EI Dupont
MPI™ FittingsPolyflex®
Hose
34 Parker Hannifin CorporationParflex Division polyflex® OperationsStafford, Texas
Polyflex® HosePARKER
PART NO.JACKETCOLOR
INCH INCH PSI PSI INCH LBS/FT
2020N-02V30 BLACK 0.12 0.24 9,280 23,200 1.18 0.05
2240D-025V34 RED 0.17 0.30 17,400 43,500 2.95 0.067
2245N-04V00 BLACK 0.25 0.50 10,440 26,100 2.76 0.172245N-04V02 BLUE 0.25 0.50 10,440 26,100 2.76 0.172245N-04V04 RED 0.25 0.50 10,440 26,100 2.76 0.17
2380N-04V00 BLACK 0.25 0.53 16,240 40,600 2.76 0.222380N-04V02 BLUE 0.25 0.53 16,240 40,600 2.76 0.222380N-04V04 RED 0.25 0.53 16,240 40,600 2.76 0.222380N-04V01 BLACK 0.25 0.53 16,240 40,600 2.76 0.22
2380N-04V33 GREEN 0.25 0.50 13,200 33,000 3.50 0.17
2390N-06V13 GREEN 0.4 0.70 10,300 25,810 3.00 0.28
2440N-08V37 GRAY 0.5 0.88 20,400 51,000 7.87 0.632440N-08V71 GRAY 0.5 0.88 20,400 51,000 7.87 0.63
2440N-12V37 GRAY 0.81 1.19 14,500 37,500 10.00 0.932440N-12V71 GRAY 0.81 1.19 14,500 37,500 10.00 0.93
MAX.O.D.
MAX.WORKINGPRESSURE WEIGHT
MIN.I.D.
MIN.BURST
PRESSURE
MIN.BEND
RADIUS
IntroductionParker Hannifin polyflex® reinforced polymer hose is available in a wide variety of constructions, styles, andlengths to meet a vast number of industrial and offshore applications. Styles shown on these pages arecompatible with Parker MPI™ Fittings and offer these benefits:
• Flexible with small outside diameter for tight routing • Chemical-resistant tube and cover
• Abrasion resistant polymer cover for longer life • Steel-reinforced styles resist kinks
TYPICAL APPLICATIONS:
• Offshore oil and gas platforms and satellites• Oilfield workover sites
• Chemical injection lines• Pressure testing
• Hydraulic controls• Waterblast cleaning
Temperature range: -40o to +140oF (-40o to +60oC). Contact the factory for temperatures outside this range.
For additional information about polyflex® hose, including information about construction, typical applications,working pressure and installation, contact your authorized Parker Instrumentation Distributor or the ParkerHannifin polyflex® Hose headquarters at (281) 530-5300.
MPI™ FittingsPolyflex®
Hose
35 Parker Hannifin CorporationParflex Division polyflex® OperationsStafford, Texas
How to Order Polyflex® Hose Assemblies
Example Hose Assembly Number: 2244NAYAY111108C10-600
2244N AY AY 11 11 08 C 10 - XXX
NPT1 = 1/16-272 = 1/8-274 = 1/4-186 = 3/8-188 = 1/2-1412 = 3/4-1416 = 1-11 1/220 = 1 1/4-11 1/224 = 1 1/2-11 1/232 = 2-11 1/2
These two letters will indicatethe STYLE of connection.End 1 & End 2
01 = NPT Pipe, Male, Rigid02 = NPT Pipe; Female Rigid06 = JIC 37 degree.; Female Swivel07 = NPSM Pipe; Female Swivel
60°92 = BSP Pipe; Female SwivelAY = Type M; Female Swivel 58°YA = Type M; Male (adaptor ends)C9 = Metric; Female, Swivel
24/O-RingD9 = BSP; Male, RigidY1 = MP Nipple; Male, w/ GNut &
CollarY2 = MP Nipple; Male, wo/ GNut &
CollarY3 = HP Nipple; Male, w/ GNut &
CollarY4 = HP Nipple; Male, wo/ GNut &
CollarY5 = MP Flare; Male, RigidY6 = HP Flare; Male, Rigid5Y = MP Flare; Female6Y = HP Flare; Female
Whenspecifyinghose size,indicate thetwo digit code.
Hose Dash Code
Size
01 01
015 1A
02 02
025 2B
03 03
04 04
05 05
06 06
08 08
10 10
12 12
16 16
20 20
24 24
32 32
D
This part will contain adash followed by a oneor two digit numberindicating the endconnection size.End 1 & End 2
UNF1 = 1/4" - 28 UNF2 = 5/16" - 24 UNF3 = 3/8" - 24 UNF4 = 7/16" - 20 UNF5 = 1/2" - 20 UNF6 = 9/16" - 18 UNF7 = 5/8" - 18 UNF8 = 3/4" - UNF9 =10 = 7/8" - 14 UNF11 = 1" - 12 UNF12 = 1 1/16" - 12 UNF13 = 1 1/8" - 12 UNF14 =15 = 1 1/4" - 12 UNF16 = 1 5/16" - 12 UNF17 = 1 3/8" - 12 UNF18 =19 = 1 1/2" - 12 UNF20 = 1 5/8" - 12 UNF
This series ofnumbers willindicate the hoseVariation Number.
Examples:
2040N - 02 V002020N - 02 V30
2240D - 025 V342245N - 16 V302245N - 20 V302244N - 025 V002244N - 08 V10
2380N - 04 V332380N - 04 V002380N - 05 V00
2440N - 08 V372440N - 12 V372440N - 16 V37
2640D - 025 V322640N - 12 V32
2740D - 03 V302740D - 05 V32
2840D - 03 V34
This seriesof numberswill indicatethe hosebase number.
Examples:
2040N - 022040N - 04
2240D - 0252245D - 032243D - 03
2390N - 042390N - 062390N - 082390N - 12
2440D - 0252440D - 052440N - 082440N - 12
2640N - 082640N - 12
2740D - 032740D - 05
2840D - 03
(A) (B)
A B C F
(C) (D) (E) (F) Indicate Lengthin Inches
Medium and HighPressure TubeMale or female, sizedby nominal tube O.D.
04 = 1/4" tube06 = 3/8" tube09 = 9/16" tube12 = 3/4" tube16 = 1" tube
Indicate thefitting material.S = SteelB = BrassC = Stainless Steel
E
36 Parker Hannifin Corporation
MPI™ FittingsSystem Notes
MPI™ FittingsSystem Notes
37 Parker Hannifin Corporation
38 Parker Hannifin Corporation
MPI™ FittingsOffer Of Sale
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,offers, acknowledgments, acceptances and sales of Seller’s products aresubject to and shall be governed exclusively by the terms and conditionsstated herein. Buyer’s acceptance of any offer to sell is limited to these termsand conditions. Any terms or conditions in addition to, or inconsistent withthose stated herein, proposed by Buyer in any acceptance of an offer bySeller, are hereby objected to. No such additional, different or inconsistentterms and conditions shall become part of the contract between Buyer andSeller unless expressly accepted in writing by Seller. Seller’s acceptanceof any offer to purchase by Buyer is expressly conditional upon Buyer’sassent to all the terms and conditions stated herein, including any terms inaddition to, or inconsistent with those contained in Buyer’s offer, Acceptanceof Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the dateof delivery of the items purchased hereunder. Amounts not timely paidshall bear interest at the maximum rate permitted by law for each monthor portion thereof that the Buyer is late in making payment. Any claims byBuyer for omissions or shortages in a shipment shall be waived unless Sellerreceives notice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shallbe made F.O.B. Seller’s plant. Regardless of the method of delivery, how-ever, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Anydelivery dates shown are approximate only and Seller shall have no liabilityfor any delays in delivery.4. Warranty: Seller warrants that items sold hereunder shall be free from defects in material or workmanship. THIS WARRANTY COMPRISESTHE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PRO-VIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY,GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER.ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER-CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS,IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, ORCOURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY ORPARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR INANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACTSHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENTOF THE ITEMS SOLD, AT SELLER’S SOLE OPTION. IN NO EVENTSHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUEN-TIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSO-EVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISINGFROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT ORITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROMBREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR INTORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURETO WARN OR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request tomodify the designs or specifications for the items sold hereunder as wellas the quantities and delivery dates thereof, or may request to cancel allor part of this order, however, no such requested modification or cancellationshall become part of the contract between Buyer and Seller unless acceptedby Seller in a written amendment to this Agreement. Acceptance of anysuch requested modification or cancellation shall be at Seller’s discretion,and shall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any special tool-ing, including without limitation, dies, fixtures, molds and patterns, acquiredto manufacture items sold pursuant to this contract. Such special toolingshall be and remain Seller’s property notwithstanding payment of anycharges by Buyer. In no event will Buyer acquire any interest in apparatusbelonging to Seller which is utilized in the manufacture of the items soldhereunder, even if such apparatus has been specially converted or adapt-ed for such manufacture and not withstanding any charges paid by Buyer.Unless otherwise agreed, Seller shall have the right to alter, discard orotherwise dispose of any special tooling or other property in its sole dis-cretion at any time.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,confidential information or equipment furnished by Buyer or any otheritems which become Buyer’s property, may be considered obsolete andmay be destroyed by Seller after two (2) consecutive years have elapsedwithout Buyer placing an order for the items which are manufactured usingsuch property, Seller shall not be responsible for any loss or damage tosuch property while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices andcharges are exclusive of excise, sales, use, property, occupational or liketaxes which may be imposed by any taxing authority upon the manufac-ture, sale or delivery of the items sold hereunder. If any such taxes mustbe paid by Seller or if Seller is liable for the collection of such tax, theamount thereof shall be in addition to the amounts for the items sold.Buyer agrees to pay all such taxes or to reimburse Seller therefore uponreceipt of its invoice. If Buyer claims exemption from any sales, use orother tax imposed by any taxing authority, Buyer shall save Seller harm-less from and against any such tax, together with any interest or penaltiesthereon which may be assessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Sellershall have no liability for infringement of any patents, trademarks, copy-rights, trade dress, trade secrets or similar rights except as provided in thisPart 10. Seller will defend and indemnify Buyer against allegations ofinfringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress andtrade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defendat its expense and will pay the cost of any settlement or damages awardedin an action brought against Buyer based on an allegation that an item soldpursuant to this contract infringes the Intellectual Property Rights of a thirdparty. Seller’s obligation to defend and indemnify Buyer is contingent onBuyer notifying Seller within ten (10) days after Buyer becomes aware ofsuch allegations of infringement, and Seller having sole control over thedefense of any allegations or actions including all negotiations for settle-ment or compromise. If an item sold hereunder is subject to a claim that itinfringes the Intellectual Property Rights of a third party, Seller may, at itssole expense and option, procure for Buyer the right to continue using saiditem, replace or modify said item so as to make it noninfringing, or offer toaccept return of said item and return the purchase price less a reasonableallowance for depreciation. Notwithstanding the foregoing, Seller shallhave no liability for claims of infringement based on information providedby Buyer, or directed to items delivered hereunder for which the designsare specified in whole or part by Buyer, or infringements resulting from themodification, combination or use in a system of any item sold hereunder.The foregoing provisions of this Part 10 shall constitute Seller’s sole andexclusive liability and Buyer’s sole and exclusive remedy for infringementof Intellectual Property Rights.If a claim is based on information provided by Buyer or if the design for anitem delivered hereunder is specified in whole or in part by Buyer, Buyershall defend and indemnify Seller for all costs, expenses or judgmentsresulting from any claim that such item infringes any patent, trademark,copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not beliable for delay or failure to perform any of Seller’s obligations by reason ofcircumstances beyond the reasonable control of Seller (hereinafter‘Events of Force Majeure’). Events of Force Majeure shall include withoutlimitation, accidents, acts of God, strikes or labor disputes, acts, laws, rulesor regulations of any government or government agency, fires, floods,delays or failures in delivery of carriers or suppliers, shortages of materialsand any other cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions setforth herein, together with any amendments, modifications and any differentterms or conditions expressly accepted by Seller in writing, shall constitutethe entire Agreement concerning the items sold, and there are no oral orother representations or agreements which pertain thereto. This Agreementshall be governed in all respects by the law of the State of Ohio. No actionsarising out of the sale of the items sold hereunder or this Agreement maybe brought by either party more than two (2) years after the cause of actionaccrues.
11/98-P
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its autho-rized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors.This offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any suchitems, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constituteacceptance of this offer.
39 Parker Hannifin Corporation
Parker Hannifin Corporation
Parker’s CharterTo be a leading worldwide manufacturer of compo-
nents and systems for the builders and users of
durable goods. More specifically, we will design,
market and manufacture products controlling
motion, flow and pressure. We will achieve
profitable growth through premier customer service.
Product InformationNorth American customers seeking product infor-
mation, the location of a nearby distributor, or repair
services will receive prompt attention by calling the
Parker Product Information Center at our toll-free
number: 1-800-C-PARKER (1-800-272-7537). In
Europe, call 00800-C-PARKER-H (00800-2727-5374).
The Fluid ConnectorsGroup designs, manufacturesand markets rigid and flexibleconnectors, and associatedproducts used in pneumaticand fluid systems.
The Hydraulics Groupdesigns, produces andmarkets a full spectrum ofhydraulic components andsystems to builders andusers of industrial andmobile machinery andequipment.
The Automation Groupis a leading supplier of pneu-matic and electromechanicalcomponents and systemsto automation customersworldwide.
The Seal Group designs,manufactures and distributesindustrial and commercialsealing devices and relatedproducts by providingsuperior quality and totalcustomer satisfaction.
The Filtration Groupdesigns, manufactures andmarkets quality filtrationand clarification products,providing customers withthe best value, quality,technical support, and globalavailability.
The InstrumentationGroup is a global leader inthe design, manufacture anddistribution of high-qualitycritical flow components forworldwide process instru-mentation, ultra-high-purity, medical andanalytical applications.
About Parker Hannifin CorporationParker Hannifin is a leading global motion-control
company dedicated to delivering premier customer
service. A Fortune 500 corporation listed on the New
York Stock Exchange (PH), our components and
systems comprise over 1,400 product lines that
control motion in some 1,000 industrial and aero-
space markets. Parker is the only manufacturer to
offer its customers a choice of hydraulic, pneumatic,
and electromechanical motion-control solutions. Our
Company has the largest distribution network in its
field, with over 7,500 distributors serving nearly
400,000 customers worldwide.
The Aerospace Group isa leader in the development,design, manufacture andservicing of control systemsand components for aerospaceand related high-technologymarkets, while achievinggrowth through premiercustomer service.
The Climate & IndustrialControls Group designs,manufactures and marketssystem-control and fluid-handling components andsystems to refrigeration,air-conditioning and indus-trial customers worldwide.
Parker Hannifin Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com
Parker Hannifin CorporationInstrumentation Products DivisionP.O. Box 400004-1504Huntsville, AL 35815-1504USAPhone: (256) 881-2040Fax: (256) 881-5730www.parker.com/icd
Parker Hannifin CorporationInstrumentation Products Division2651 Alabama Highway 21 NorthJacksonville, AL 36265-9681USAPhone: (256) 435-2130Fax: (256) 435-7718www.parker.com/ivd
Parker Hannifin CorporationVeriflo Division250 Canal BoulevardP.O. Box 4034Richmond, CA 94804-0034Phone: (510) 235-9590Fax: (510) 232-7396www.veriflo.com
Parker Hannifin CorporationParflex Division polyflex® Operation12840 Sugar Ridge BoulevardStafford, TX 77477USAPhone: (281) 530-5300Fax: (281) 530-5353www.parker.com
Parker Hannifin plcInstrumentation Products DivisionRiverside RoadPottington Business ParkBarnstaple, Devon EX31 1NPEnglandPhone: +44 (0) 1271 313131Fax: +44 (0) 1271 373636Email: [email protected]/ipd
Catalog 4234-MPI™, 10M, CG, 08/03
Top Related