Product Information
Reduces the danger of belt rips
Simple assembly using construction kit
Preassembled lines
Easy to adjust
Deactivation of the conveyor system via contact
ME 9000
Detector for detecting ferromagnetic metals on belt conveyors
ME 9000 Date: 01-07-2010
Page2
Performance features
The ME 9000 metal detector system is used to detect ferrometallic objects and designed for the attachment of belt conveyor equipment. The system has an "intrinsically safe" design and is thus suited for underground use.
The purpose is to find any metallic objects (tools, construction materials, etc.) lying on the conveyor that can lead to damage to the belt (e.g. tearing). When metal is detected, the device emits a signal that can be used to deactivate the conveyor or send and alarm.
The sensitivity is variable and can be set in the evaluation electronics using a potentiometer.
The metal detector system consists of the following components:
Evaluation electronics (ME 9001.1A)
Antenna with antenna adapter (ME 9003)
Mount for antenna adapter
Mount for antenna
Connecting line from ME 9000.1A to ME 9003
Power pack
The antenna is a preassembled, four-wire line section with a maximum of 8.1 metres in length mounted around the belt conveyor as a loop and completely surrounding it. Both ends of the antenna line are connected in the antenna adapter. A preassembled line also leads from the antenna adapter to the evaluation electronics.
The alarm indication of the metal detector is available as a floating optical coupler output at the terminals in the antenna adapter housing and can be conducted to any control unit.
The wide-range voltage power supply SVI 12, proven for mining, is used as the power supply. The power supply is available in "d" or "e" type of protection. The line between the power supply and the evaluation electronics may be up to 100 metres long, depending on the approval.
Technical data ME 9000
Electrical data ME 9000
Supply voltage 12 V
Power consumption 150 mA
Mechanical data ME 9000
ME 9001.A evaluation electronics
Approx. width 280 mm
Approx. height 105 mm
Approx. depth 65 mm
ME9003 antenna adapter
Approx. width 380 mm
Approx. height 160 mm
Approx. depth 105 mm
Antenna length Max. 8.1 m
Electrical data SVI 12
Supply voltage 90 through 250 V AC
Max. current consumption 0.4 A
Mechanical data SVI 12 (ATEX version)
Approx. width 110 mm
Approx. height 395 mm
Approx. depth 90 mm
Explosion protection system
Labelling IM2 SYST EEX ib I
Certificate BVS 03 ATEX E 280 X
The technical data consists of limit values.
If the product is integrated into systems or operated in combination with other devices, its permissible operating values may deviate from these limit values. Subject to technical changes.
Becker Mining Systems AG l Barbarastrasse 3 l 66299 Friedrichsthal l Germany Phone +49 6897 857-0 l Fax +49 6897 857-188 l [email protected] l www.becker-mining.com
know-how performance reliability
Top Related