...a passion for perfection
DRILLING & TAPPING SOLUTIONS
www.amtplindia.com
2019-2020
BT 15 GLBT 18 GL (3) UNIMAX 2S TAP SPEEDMAXPrecision drilling machine for drillings starting from0.2 mm. Variable frequency drive with digital RPMindicator. Very high spindle concentricity <0.005 mm.Optional visualization by camera and collet setare available at extra cost.
Standard capacity in E 335
Spindle / Collet
Spindle to column
Spindle to baseplate
Table surface
Total Height
Weight
Motor
Stepless spindle rpm
Mains connection
Spindle travel
ER 11
0.2 - 4 mm
55 mm
215 mm
60 to 345 mm
280 x 475 mm
780 mm
51 kg
0.75 kW
700-24,000 rpm
230 V / 50-60 Hz
Manufacturing Marketing Sourcing
Marketed by
ahire machine tools pvt ltd Web Email
: www.amtplindia.com: [email protected]
High performance tapping machine with lead screw.Safety arrangement for prevention of tool breakage.Programme for tapping single and continous cycles,programmable tapping depth, piece counter, LEDmachine light and electronically controlled motorbraking for single cycle operation. Simple replacementof lead screw by means of quick coupling.
Technical data BT 18 GL
Tapping capacity
Threads per hour
Standard capacity
Spindle
Depth of thread
Spindle travel
Spindle to column
Spindle / Table
Table surface
T-slot width
Column diameter
Total height
Weight
Special motor
Mains connection
4 xed spindle rpm steps
M3- M10
1,000
15 mm
MT 2
60 mm
100 mm
250 mm
185-541 mm
340 x 445 mm
12 mm
90 mm
1,050 mm
120 kg
0.55 kW
400 V / 50 Hz
320 rpm
560 rpm
1,000 rpm
1,600 rpm
Optional / Accessories
• Lead screw
• Tap holder
• Bottoming release switch
• Force ventilated motor
• Column longer by 200 mm for BT 18 GL
• Foot impulse switch
• Minimum quantity lubrication system
• Floor units
Very powerful, all-purpose drilling machine withwide range of application. Three-phase motor,integrated tapping unit as standard. LED machinelight and programmable tapping depth.Rpm and drilling depth are shown in the display.
Technical data UNIMAX2 TAP
Constant capacity in E 335
Standard capacity
Tapping capacity
Spindle
Spindle travel
Spindle to column
Spindle / Table
Table surface
T-slot width
Column diameter
Total height
Weight
Frequency-controlled motor
Mains connection
LED machine light
Stepless Spindle rpm
Drilling Range A
Drilling Range B
Tapping Range A
Tapping Range B
18 mm
20 mm
M 16 in S235
MT 2
100 mm
225 mm
55 to 880 mm
450 x 315 mm
14 mm
90 mm
max 1,745 mm
170 kg
1.5 kW
230 V / 50 Hz
included
100-2,000 rpm
200-4,000 rpm
100-500 rpm
200-1,000 rpm
Optional / Accessories
• Tap holder
• Minimum quantity lubrication system
Technical data SPEEDMAX
Optional / Accessories
• Visual display camera
• Collet set
Manufactured by
MAXION Jänsch & Ortlepp GmbHWeb : www.maxion.de
89x52x127 cmStandard packaging
Standard packaging 220x74x125 cm
Reliable tapping machine for quality-orientated tapping respectively Reliable tapping machine for quality-orientated tapping respectively thread moulding M1 to M 18, screw in of thread inserts, rethreadingthread moulding M1 to M 18, screw in of thread inserts, rethreadingand postforming as well as checking already manufactured threads.and postforming as well as checking already manufactured threads.Thanks to the menu guided operation machine parameters can beThanks to the menu guided operation machine parameters can beentered fast and uncomplicated. For each particular machiningentered fast and uncomplicated. For each particular machiningprocess the ideal rotation speeds, drilling depth as well as theprocess the ideal rotation speeds, drilling depth as well as theminimum and maximum tapping torque can be entered. If theminimum and maximum tapping torque can be entered. If themachine leaves these parameters, the thread will be identied asmachine leaves these parameters, the thread will be identied asdefective. By means of an integrated piece counter an overviewdefective. By means of an integrated piece counter an overviewof already processed workpieces is provided everytime. For analysisof already processed workpieces is provided everytime. For analysisand control of tapping processes the machine can be connectedand control of tapping processes the machine can be connectedto a PC.to a PC.
Reliable tapping machine for quality-orientated tapping respectively thread moulding M1 to M 18, screw in of thread inserts, rethreadingand postforming as well as checking already manufactured threads.Thanks to the menu guided operation machine parameters can beentered fast and uncomplicated. For each particular machiningprocess the ideal rotation speeds, drilling depth as well as theminimum and maximum tapping torque can be entered. If themachine leaves these parameters, the thread will be identied asdefective. By means of an integrated piece counter an overviewof already processed workpieces is provided everytime. For analysisand control of tapping processes the machine can be connectedto a PC.
MAXTAP / JOBTAP
This model is now also manufactured in India by under Licence fromamt MAXION Jänsch & Ortlepp GmbH
BS 25 AVSTPowerful and precise universal column drilling machine with stepless drive mechanism. Electro-magnetic clutch for feed. Table adjustable via rack and pinion, rotatable around column. Motor protection, Depth and RPM indicator. Machine base with T-slots.
Constant Capacity in St 60 25 mm
Extra Attachment
Numerical Control (NC) XY Table
Work Table
X-Y Stroke
600x240mm
350/150mm
Available with XY Table
GANG DRILLINGMACHINES
Maxtap / Jobtap G5 G8
Tapping performance
X5CrNi189/1.4435
9SMn28/1.0415
AlCuMgPb/3.1645
Max.tapping depth / stroke
Insert holder
quick change system
Insert holder / spindle
Distance tool holder/work table
Torque range Mz (stepless)
Spindle sped range (stepless)
With
depth
Height
Weight net
Column (adjustable with hand wheel)
base plate in mm
2 x T-slot
Mains voltage
Power consumption
M1-M5
M1-M6
M1-M6
45/65 mm
SWS 0
incl.5 inserts
B 10
0-280 mm
5-220 Ncm
250-2,200 rpm
323 mm
510 mm
780 mm
51.4 kg
600 mm
280x475x50
M 12x14
230 V/50-60 Hz
300 W
M2.5-M8
M2.5-M10
M2.5-M12
75/85mm
SWS 1
incl.6 inserts
B 12
0-400 mm
50-700 Ncm
300-3,000 rpm
312 mm
530 mm
930 mm
61.7 kg
750 mm
280x475x50
M 12x14
230 V/50-60 Hz
2,900 W
Column Diameter
Weight
Pole Changing Motor
Stepless Rotation Speeds
Mode of spindle travel
T-slot on work table (Size & Qty.)
T-slot on Base (Size & Qty.)
110 mm
285 kg
0.8/1.5 KW
Manual & Auto
(14 mm x 2Nos.)
(14 mm x 2Nos.)
900x600x1850mm
120-2200rpm (approx.)
Standard capacity 32 mm
Spindle
Automatic Feed
Spindle Travel
Spindle to Column
Spindle to Table
Spindle to base
Table Surface
MT 3
120 mm
260 mm
90 to 760 mm
1320 mm
500 x 365 mm
0.1-0.16-0.25mm/turn
Dimension (LxWxH)
•The AMT multi-head units are mounted on box -The AMT multi-head units are mounted on box -
type stands and can be supplied with 2, 3, 4, 5 type stands and can be supplied with 2, 3, 4, 5
or 6 units. or 6 units.
The heavy torsion resistant fabricated table has The heavy torsion resistant fabricated table has•
2 T- slots. 2 T- slots.
It also has a storage shelf. It also has a storage shelf.•
The electrical equipment is clearly laid out in a The electrical equipment is clearly laid out in a•
terminal switch box terminal switch box
Alternative heads : Alternative heads : •
BT6, DB 23/28, TDB 23/28, BT6, DB 23/28, TDB 23/28,
BS 25 AVST, TDB 23/28 VFD BS 25 AVST, TDB 23/28 VFD
Electrical coolant unit at extra cost. Electrical coolant unit at extra cost.•
Other accessories see back page. Other accessories see back page.•
•The AMT multi-head units are mounted on box -
type stands and can be supplied with 2, 3, 4, 5
or 6 units.
The heavy torsion resistant fabricated table has•
2 T- slots.
It also has a storage shelf.•
The electrical equipment is clearly laid out in a•
terminal switch box
Alternative heads : •
BT6, DB 23/28, TDB 23/28,
BS 25 AVST, TDB 23/28 VFD
Electrical coolant unit at extra cost.•
Other accessories see back page.•
Technical data BS 25 AVST
Drilling Machinewith Auto Feed
Description Units DB 23A
Drilling capacity in steel mm Ø 20
Spindle Nose Taper MT MT2
Spindle stroke max.
for Drillingmm 125
No. of spindle speed Nos 8
Mode of spindle feedfor Drilling Mode Automatic
Column Diameter
Spindle to column face
Clamping area on
work table
Net weight (Approx.)
mm 80
240mm
mmx
mm240 x 240
kg 165
Drilling & Tapping Machinewith Variable Frequency
Drive (VFD)
High Speed Micro DrillingMachine
Description Units TDB-23V Description Units
Drilling capacity in steel
Tapping capacity in steel
Step less Rotation speeds
Range A
Range B
Spindle
Spindle Travel
Spindle to column
Column Diameter
Table surface
Make
Model
Frequency control 3- Phase motor
mm
rpm
rpm
mm
mm
mm
mm
mm
4-20
M4-M12
230 - 770
845-2800
MT 2
125
240
80
240x240
ABB
ACS 150
2HP, 50Hz,415 V
Digital Display for RPM
Reverse forward switch for tapping
Adjustment of speed via. potentiometer
Machine is suitable for Thermal drilling
operations.
ŸŸŸŸ
Drilling capacity in steel
Spindle
Spindle Travel
Spindle to column
Spindle to table
Table surface
T-slot width
Columm diameter
Total height
Weight
Pole changing motor
Mains connection 3 phase
8 xed spinsle rpm steps
Standard packaging
with cabinet
mm
mm
mm
mm
mm
mm
mm
mm
kg
kw
rpm
mm
BT 6
0.7-6
B12
55
180
135 to 380
220 to 285
12
75
800
73
0.37/0.6
400 v / 50 Hz
900-10,000
890x520x1270
Spindle face to Work Table
T Slot on Work Table
(Size x Qty)
Spindle face to Base Plate
Base Plate Working
Area (Std)
Base Plate Working
Area (Coolant)
T Slot on Base
(Size x Qty)
Main Motor Power**
mm
x mm
mm
x mm
mm
x Nos
HP
mm
mm
x Nos
mm
308/600
12 x 2
600/660-1150
250 x 250
250 x 280
14 x 2
1/1
Spindle to column face
Clamping area on
work table
Net weight (Approx.)
Dimensions
240mm
mmx
mm240 x 240
kgs 165
380x700x1130
mm
Spindle face to Work Table
T Slot on Work Table
(Size x Qty)
Spindle face to Base Plate
Base Plate Working
Area (Std)
Base Plate Working
Area (Coolant)
T Slot on Base
(Size x Qty)
Main Motor Power**
mm
x mm
mm
x mm
mm
x Nos
HP
mm
mm
x Nos
mm
308/600
12 x 2
600/660-1150
250 x 250
250 x 280
14 x 2
1/1Delta make PLC with HMI
Program for drilling single & continuous cycle
Stepper motor - 870 kg-cm
Helical gear box
Ÿ
Ÿ
Ÿ
Ÿ
Sensitive precision drilling machine with veryhigh concentricity, especially for electronic &precision engineering
Spindle run out accuracy maintained within 10microns at spindle nose.
Column adjustable via rack & pinionarrangement.
Dual speed motor
Mode of spindle feed for drilling - Manual
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Note : These models are available in column type conguration
AMT PRECISION DRILLING & TAPPING MACHINES
Range of spindle speed rpm 112 -2800
Dimensions 380x700x1130
mm
Machine Features :
TDB/TDC-23TDB/TDC-23 EQ-16TDDB/DC-28
High precision spindle made from alloy steel, hardened & precision ground.
Graded casting (Stress relieved).
Alloy steel gears.
Spindle auto reversal for tapping cycle.
Robust construction.
Motor with electrical fitments is a standard feature.
Machine lamp - a standard feature.
Stringent quality checks at every level.
Test chart is provided with every machine.
Spindle run-out accuracy is within 10 microns.
Easy belt changing through rack and pinion mechanism.
Dynamically balanced v-belt pulleys guarantee of secure power
transmission even in the lower rotation speeds.
Machine is recommended for Thermal Drilling Operation.
AMT PRECISION DRILLING &TAPPING MACHINES
Unit
mm
mm
MT
Metric
mm
mm
Nos
rpm
Mode
Mode
mm
mm
mm
mm x mm
mm x Nos
mm
mm x mm
mm x mm
mm x Nos
HP
Kg
mm
DB/DC-23
Ø 23
- -
MT2
M32 x 1.5P
125
- -
8
112-2800
Manual
- -
80
240
308/600
240 x 240
12 x 2
600/660-1150
250 x 250
250 x 280
14 x 2
165/180
380x700x1130/
480x740x1700
TDB/TDC-23
Ø 23
M14
MT2
M32 x 1.5P
125
100
8
56-1400
Manual
Manual
80
240
308/600
240 x 240
12 x 2
600/660-1150
250 x 250
250 x 280
14 x 2
1
167/182
380x700x1130/
480x740x1700
DB/DC-28
Ø 28
- -
MT3
M35 x 1.5P
125
- -
8
112-2800
Manual
- -
80
240
308/600
240 x 240
12 x 2
600/660-1150
250 x 250
250 x 280
14 x 2
2
165/180
380x700x1130/
480x740x1700
Description
Drilling Capacity in Steel (MS)
Tapping Capacity in Steel (MS)
Spindle Nose Taper
Threading on Spindle OD
Spindle Stroke Max. for Drilling
Spindle Stroke Max. for Tapping
No. of Spindle Speed
Range of Spindle Speed
Mode of Spindle feed for Drilling
Mode of Spindle feed for Tapping
Column Diameter
Spindle to Column Face
Spindle face to Work Table
Clamping area on Work Table
T Slot on Work Table (Size x Qty)
Spindle face to Base Plate
Base Plate Working Area (Std)
Base Plate Working Area (Coolant)
T Slot on Base (Size x Qty)
Main Motor Power
Net Weight (Approx)
Dimensions (WxDxH)
TDB/TDC-28
Ø 28
M16
MT3
M35 x 1.5P
125
8
56-1400
Manual
Manual
80
240
308/600
240 x 240
600/660-1150
250 x 280
14 x 2
2
167/182
380x700x1130/
480x740x1700
Spindle auto-reversal facility to enable tapping operation.
Motor power can be increased upto 3 HP to enable Thermal Drilling Operations.
Available Accessories : Anti-vibration mounts, External coolant attachment, Albrecht key-less drill chuck, Clamping vice,
Reducer sleeve, Cabinet are available at extra cost.
EQ-16TD
M8 / 10
MT-2
M32 x 1.5P
125
4
355-2000
Manual
Manual
80
240
308/600
12 x 2
600
250 x 250 250 x 280
--
--
0.51
150
308x700x1130
100 100
Ø 16 / 18
Ø 300
--
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
ACCESSORIES
Add : D1/18, MIDC, Ambad,Nashik, Maharashtra, India. 422010Contact No. : +91 9922448079, +91 9922413270 , +91 9130099422
Email : [email protected] Web : www.amtplindia.com
Manufacturing Marketing Sourcing
ahire machine tools pvt. ltd.
Manufactured by
Keyless Drill Chuck
Reducer Sleeve MT3 to MT2Clamping Vice
External Coolant System
Cabinet Box
Anti vibration Mounts
Top Related