7/22/2019 Matte Last Dc-9509
1/2
Formulation Information
Skin Moisturizers
Matte LastHydrogel: MattifyingFormulation 00231
ATTRIBUTES
Reduced Tackiness
Silky Feel
Mattifying
DOW CORNING PRODUCTS
DOW CORNING 9509 SILICONE
ELASTOMER SUSPENSION
XIAMETER PRODUCTS
XIAMETER PMX-0345
CYCLOSILOXANE BLEND
Ingredient
Phase A
Wt. % Trade Name/Supplier
1.Acrylates/ C10-30 Alkyl Acrylate
Crosspolymer
0.2 Carbopol ETD 2020 /
NOVEON / Lubrizol
2. Distilled Water 75.853. Propylene Glycol 5 Propylene Glycol / The Dow
Chemical Company
4. DMDM Hydantoin 0.3 Glydant / Lonza
5. Dimethicone / Vinyl Dimethicone
Crosspolymer (and) C12-14
Pareth-12
5 DOW CORNING 9509
SILICONE ELASTOMER
SUSPENSION
Phase B
6. Cyclopentasiloxane (and)
Cyclohexasiloxane
9 XIAMETER PMX-0345
CYCLOSILOXANE BLEND
7.Argania Spinosa Kernel Extract
(and) Serenoa Serrulata FruitExtract (and) Sesamum Indicum
(Sesame) Seed Extract
4 Regu-Seb / Pentapharm, CH
8. Perfume 0.2 Baby Powder 303-1502 /
Majestic Mountain Sage
Phase C
9. Sodium Hydroxide 0.045 Sodium Hydroxide / No
Supplier Specified
10. Deionized Water 0.405
Procedure
1. Agitate water enough to create a vortex. A pitched angle, three blade
mixer works well. Slowly sift the Carbopol powder over the vortex. A sieve
or mesh screen is recommended for this. Continue to mix and speed up
the mixer if necessary to ~1200 rpm until particles swell and become
invisible. Reduce speed to ~300 rpm to prevent foaming and continue
mixing to allow the Carbopol to hydrate.
2. Add ingredient 3 and mix.
3. Add ingredient 4 with mixing.
7/22/2019 Matte Last Dc-9509
2/2
4. Add ingredient 5 with mixing.
5. Premix ingredients of phase B (until homogeneous).
6. Add phase B to phase A while mixing.
7. Premix phase C. Make sure to add Sodium Hydroxide to water slowly.
Mix gently until dissolved.
8. Add phase C to the batch and continue to mix. The batch should becomemore viscous. pH should rise to 6.0-6.2.
Variations
Alternative Dow Corning Products have not been tested as of this printing.
Stability
Stable at least 6 months at RT. Stable for up to 2 months at 50 C. Stable for
at least 5 freeze-thaw cycles.
External Reference Material
Formulation developed by Pentapharm. Fragrances added by Dow Corning.
See the comments section regarding lab book references 18908-70 and
18908-81.
This suggested formulation is only a representative formulation and it is not a commercializedproduct. Dow Corning believes that the information and data on which this formulation isbased are reliable, but it has not been subjected to extensive testing for performance, efficacyor safety. BEFORE COMMERCIALIZATION, YOU SHOULD THOROUGHLY TEST THEFORMULATION OR ANY VARIATION OF IT TO DETERMINE ITS PERFORMANCE,EFFICACY AND SAFETY. IT IS YOUR RESPONSIBILITY TO OBTAIN ANY NECESSARYGOVERNMENT CLEARANCE, LICENSE OR REGISTRATION. In addition, Dow Corning hasnot undertaken a comprehensive patent search on the formulation. Suggestions of usesshould not be taken as inducements to infringe any particular patent.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED.BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION.FOR THE MATERIAL SAFETY DATA SHEET PLEASE SEE OUR WEB SITE,DOWCORNING.COM, OR CONSULT YOUR LOCAL DOW CORNING REPRESENTATIVE.
Dow Corning is a registered trademark of Dow Corning Corporation.XIAMETER is a registered trademark of Dow Corning Corporation.
2010 Dow Corning Corporation. All rights reserved.
Print Date: 12/23/2011 Last Updated: 12/30/2003 11:43:32 AM
Top Related