Manufacturer of Specialty Integration Cameras and Camera Control Systems
September 2005
Product Overview
EZCamera™ Cable SystemPower, Video & RS-232 Control Over CAT 5Complete Installation Kit
WallVIEW™ 100 PTZ Camera System(10X Optical Zoom)
WallVIEW™ 70 PTZCamera System(18X Optical Zoom)
WallVIEW™ PTZ Camera Series
WallVIEW™ PTZ Camera Series
WallVIEW™ 300 PTZCamera System(12X Optical Zoom)
WallVIEW™ 50i PTZCamera System(26X Optical Zoom)
WallVIEW™ 50i PTZ HideAway
CeilingVIEW™ PTZ Camera Series CeilingVIEW™ 70 PTZ
Camera System
CeilingVIEW™ 50iR PTZCamera System
CeilingVIEW™ 70 PTZ HideAway
Ceiling-Mounted Visualizers
CeilingVIEW™ Visualizer (1 CCD)
CeilingVIEW™ MegaPro Mega-Pixel Visualizer (3 CCD)
In-Wall Camera Covers
CoverVIEW™ for Canon VC-C50i
CoverVIEW™ for Sony EVI-D100
Video, Power & Control Wiring Center
Quick-Connect 4 for Vaddio EZCamera™ Cabling Systems
1 Power Supply for 4 CamerasSelectable 15v or 18v Power SupplyCentralized RS-232 ControlProfessional Installation
TrackVIEW
The Vaddio TrackVIEW Camera Control System is a presenter control system that incorporates camera tracking and video preset camera control into one system .
TrackVIEW
How does it Track me? Tracking is performed by the use of a reference
camera that provides a baseline image to our Video Motion Processor
This constant image bitmap monitors any changes to any of pixels in the bitmap
When a pixel bitmap change occurs those changes are sent to our camera control processor which then sends out the appropriate move command to the camera
Why would you use tracking and pre-set camera control together?
The basic system design incorporates camera tracking into Vaddio’s pre-set camera control technology. This allows the presenter to stay on camera as they walk between pre-set video camera shots
The net effect is that the presenter gets nice tight pre-determined camera shots at the main presentation areas and yet stays on camera when they move to another area
What Cameras can you use?
Each TrackVIEW system comes with a Sony EVI-D70 equipped with a wide angle lens to use as the reference camera
For the Tracking camera you can use either the Sony EVI-D70 /EVI-D100 / BRC-300 and the Canon VC-C50i / VC-C50iR
Pre-set camera triggers
StepVIEW, AutoVIEW IR, and any other type of contact closure device can be connected to TrackVIEW. Power for the AutoVIEW IR is now incorporated into the system and replaces the need for a Vaddio control expander.
ControlVIEW Xtreme/ProductionVIEW camera control systems can be added to the system. These add classroom control triggering to devices such as Microphones and TouchVIEW buttons so that you can automate student cameras into your system design
Pre-set camera triggers
StepVIEW, AutoVIEW IR, and any other type of contact closure device can be connected to TrackVIEW. Power for the AutoVIEW IR is now incorporated into the system and replaces the need for a Vaddio control expander.
ControlVIEW Xtreme/ProductionVIEW camera control systems can be added to the system. These add classroom control triggering to devices such as Microphones and TouchVIEW buttons so that you can automate student cameras into your system design
TrackVIEW Features Motion Tracking or Preset Tracking or Both
The system uses motion-tracking technology with Vaddio’s preset camera control technology. This combination of technologies when on, allows the presenter to stay on camera as they walk between preset camera shots.
Motion tracking can be disabled providing for only triggered preset tracking and preset tracking can be disabled allowing for only motion tracking.
TrackVIEW Features First Step, Last Step and Multi-Step Modes
First Step - The first IR sensor or mat to be triggered will hold the camera preset
Last Step - The last IR sensor or mat triggered will hold the camera preset
•Multi-Step - 2 mats or IR zones, or combination, triggered concurrently triggers a user defined 3rd preset. Up to 10 presets are available for combined pre-set configurations
TrackVIEW Features Built-in EZCamera Cabling System
The system has built-in EZCable System for running power and video over a single Cat. 5 cable. You no longer need Quick Connect Boxes to connect the cameras to the system.
These support all Sony and Canon cameras except when using the BRC-300 as the Tracking camera, then the external Quick-Connect box and camera shoe is required.
TrackVIEW Features Tracking Camera Preset
The tracking camera pre-set is a user definable pre-set camera view that is activated when the system goes into a tracking mode. This pre-set sets the zoom and the tilt of the tracking camera,so that when the tracking is enabled the camera’s zoom and tilt will be at a pre-assigned position.
TrackVIEW Features Additional Features
RS 232 Control for AMX/Crestron RS 232 control port for ControlVIEW Xtreme IR Remote Control USB System Setup port Dual Camera Mounting system
2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount
TrackVIEW
2-StepVIEW Locator Mats
S-Video Output
Main VideoDestination (Monitor, Codec, Modulator etc…)
2-Cat 5 Cables(Video/Power and Control)
TrackVIEW Triggers
1-AutoVIEW Active IR Sensor
2-Cat 5 Cables(Video/Power and Control)
TrackVIEW 70 System
TrackVIEW 70 System
Integrated with ControlVIEW Xtreme, WallVIEW, Quick-Connect 4 and MicVIEW
TrackVIEW Triggers
2-StepVIEW Locator Mats
1-AutoVIEW Active IR Sensor
TrackVIEW
2-Cat 5 Cables(Video/Power and Control)
2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount
Main VideoDestination (Monitor, Codec, Modulator, Audio system etc…)
Cat. 5 CablesRS-232 ControlDaisy Chain
2-WallVIEW 100 PTZ & 1-WallVIEW 70 PTZ
Quick-Connect 4
ControlVIEW Xtreme
S-Video
Audio
Triggers Up to 12 Total
Push to Talk AT MicsUp to 12 Total
Mic Cables
S-Video
2-Wire Triggers
S-Video
2-Cat 5 Cables(Video/Power and Control)
Cat 5 Cables(Video/Power)
MicVIEW
RS-232
Presenter-Controlled Camera SystemsAutomatic Presenter Tracking
ControlVIEW™ Xtreme PTZ Camera Control System
4 Cameras, 72 Pre-Set Positions
For Use with Microphones and/or Presenter Location Systems
Presenter Location Systems
StepVIEW™Presenter’s CameraLocation System
Exposed Mats → Above-the-Carpet
Concealed MatsUnder-the-Carpet(Not Shown)
Presenter Location Systems
AutoVIEW™ IRPresenter’s Camera Control System
Ceiling-Mounted Active IR Sensor
Presence-Sensing
Adjustable Zone
“Invisible” Mat
Presenter Location Systems
TouchVIEW™WirelessRemote Control System
4 Buttons per Receiver
Expand with AdditionalButtons & Receivers
Camera-Controlled Microphone Systems
MicVIEW™Teleconference Microphone Switcher
12 Mics per Box, Expandable to 8 Boxes with 96 MicsPush-to-Talk, Voice-Activated & Instructor-Priority Modes
Operator-Controlled Camera SystemsManual Camera Control
ProductionVIEW™Joystick – Preview Monitor – 6x2 Video Switcher
6 Cameras, 12 Pre-Sets Per CameraIncludes Automated Control Functionality
StreamVIEW AV Server
StreamVIEW AV Server
Operator-Controlled Camera Systems
Vaddio/Sony® Joystick Control Bundle
VISCA PTZ Camera
Controller with Custom
VISCA Control Cable
and Video Switcher Cable
Integrator-Friendly Solutionsfor a Variety of Audio Visual & Video Conferencing Applications
ControlVIEW Xtreme
VISCA Compatible
Camera
TouchVIEW MicVIEW or
3rd Party Mixer
StepVIEW AutoVIEW IR
RoomControllerConnect To Codec
TrackVIEW Triggers
2-StepVIEW Locator Mats
1-AutoVIEW Active IR Sensor
TrackVIEW
2-Cat 5 Cables(Video/Power and Control)
2-Model 70 Cameras with EZCamera Cabling Shoes and Dual 70/70 Mount
Main VideoDestination (Monitor, Codec, Modulator, Audio system etc…)
RS-232 ControlDiscrete Control Channels
2-WallVIEW 100 PTZ & 1-WallVIEW 70 PTZ
Quick-Connect 4
ProductionVIEW
S-Video
Audio
Triggers Up to 12 Total
Push to Talk AT MicsUp to 12 Total
Mic Cables
S-Video
2-Wire Triggers
S-Video
2-Cat 5 Cables(Video/Power and Control)
MicVIEW
Cat 5 Cables2-per Camera(Video/Power & Control)
TrackVIEW 70 System Integrated with ProductionVIEW, WallVIEW, Quick-Connect 4 and MicVIEW
Top Related