CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 1
MANUAL PRACTICO
DISEO GEOMETRICO DE CARRETERAS
AUTOCAD CIVIL 3D 2015
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 2
PERFIL DEL EXPOSITOR:
Profesional Tcnico en Computacin y Sistemas CAD, Egresado del I.S.T. SENATI, dedicado al Desarrollo de Ingeniera Bsica y Detalle (2D y 3Dimensiones) en las disciplinas: Civil, Estructuras, Mecnico, Elctrico, Piping y Instrumentacin; en las industrias: Petrolera, Minera, Naval e Industrial, usando como herramienta principal el Autocad y Autocad Civil 3D.
Mi cargo actual es Proyectista Sr. Civil - Estructural. y poseo la experiencia de haber realizado trabajos en el Per y Extranjero desde el ao 1994: 08 aos en campo Petrolero (Selva), 04 aos en campo Minero (Sierra) y 04 aos en Gabinete (Costa).
Me defino como una persona responsable y comprometida con su trabajo, con aptitudes para afrontar retos y alcanzar mis metas, con slidos principios tico-morales y con el conocimiento adquirido a travs de mi experiencia laboral y educacin, destacando entre los primeros lugares.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 3
OBJETIVO Brindar los conocimientos Avanzados del Autocad Civil 3D en la Elaboracin de
Plantillas para la optimizacin de los tiempos en el Desarrollo de la Ingeniera
Bsica, Detalle y Ejecucin de Proyectos Civiles.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 4
INDICE TITULO 1
PERFIL DEL EXPOSITOR 2 OBJETIVO 3 CAPITULO 1 : Importar Puntos-Carretera.csv 5
CAPITULO 2 : Crear Superficies: Curvas de Nivel 10
CAPITULO 3 : Etiquetar Curvas de Nivel 13
CAPITULO 4 : Crear Alineamiento Horizontal 16
CAPITULO 5 : Enumerar Etiquetas de los PIs 20
CAPITULO 6 : Insertar Cuadros de elementos de Curvas 22
CAPITULO 7 : Insertar Perfil Longitudinal Alineamiento Vertical 25
CAPITULO 8 : Trazo de Rasante en Alineamiento Vertical 31
CAPITULO 9 : Actualizacin de Datos de las Bandas del Perfil 34
CAPITULO 10: Definiendo y Creacin de Obra Lineal Corridor 37
CAPITULO 11: Crear Lneas de Muestreo Sample Lines 45
CAPITULO 12: Insertar Seccin Transversal 48
CAPITULO 13: Visualizacin del Reporte Movimiento de Tierra 56
CAPITULO 14: Mejorar Diseo para la Presentacin Final 61
CAPITULO 15: Crear Cuadricula de Coordenadas 64
CAPITULO 16: Recorrido Virtual de la Va 68
FIN 72
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 5
CAPITULO 1
Importar Puntos-Carretera.csv
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 6
Cargar Plantilla para diseo de Vias.dwt
A) Verificar en que formato se encuentra los puntos, en este caso el formato es PNEZD
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 7
B) Aadir puntos topogrficos: Buscamos en el men Home/Points/creat points/Import points/ y seleccionamos el origen del archivo.
C) Creamos un nombre al grupo de puntos. Ejemplo: Puntos de Carretera.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 8
D) Con un ZE visualizamos los puntos ya con un estilo definido de acuerdo a nuestra plantilla configurada.
E) Para editar estilo de puntos: Prospector/Point Groups/Click Derecho sobre PUNTOS DE CARRETERA/Properties
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 9
Nota: Como tenemos la plantilla creada se nos hace ms fcil el trabajo. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: PUNTOS HV / NINGUNO Labels: ETIQUETA PUNTO_ELEVACIN_DESCRIPCIN / NINGUNO
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 10
CAPITULO 2
Crear Superficies: Curvas de Nivel.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 11
A) Para crear superficies nos vamos: Prospector/Surface Create
B) Luego agregamos los puntos a nuestra Superficie para que se generen nuestras curvas de nivel.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 12
Nota: Como tenemos la plantilla creada se nos hace ms fcil para este proyecto. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: CURVAS SECUNDARIAS A 1m_MAESTRAS A 5m Style: CURVAS SECUNDARIAS A 2m_MAESTRAS A 10m
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 13
CAPITULO 3
Etiquetar Curvas de Nivel
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 14
A) Vamos a etiquetar las curvas maestras y las curvas secundarias: Annotate/Add Labels/Surface/Add Surface Labels Para Pendientes.
B) Vamos a etiquetar las curvas maestras y las curvas secundarias: Annotate/Add Labels/Surface/Add Surface Labels Para curvas de nivel.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 15
Nota: Como tenemos la plantilla creada se nos hace ms fcil para este proyecto. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Labels slope: PENDIENTES Labels Contour Multiples: CURVAS MAESTRAS / NINGUNO Labels Contour Multiples: CURVAS SECUNDARIAS /NINGUNO
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 16
CAPITULO 4
Crear Alineamiento Horizontal
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 17
A) Para realizar nuestro alineamiento horizontal nos vamos: Alignment/Alignment Create Tools
B) Usamos nuestro propio criterio de diseo ya configurado, en este caso Diseo de velocidad 30km/h para rea Rural Accidentado.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 18
Esto quiere decir Cuando voy a disear la va fuera de la norma sale una advertencia.
C) Ocultamos los puntos para que se nos haga fcil el alineamiento luego:
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 19
Nota: Esta es la ventaja cuando se trabaja con una plantilla. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: EJE DE ACCESO CARRETERA Label: DISEO GEOMETRICO HORIZONTAL Check Design: AREA RURAL ACCIDENTADO Check Design: AREA RURAL CON PELIGRO DE HIELO Check Design: AREA RURAL PLANO U ONDULADO Check Design: AREA URBANO Multiple Segment/Curve Label: ELEMENTOS DE CURVA Multiple Segment/Line Label: NINGUNO Multiple Segment/Spiral Label: NINGUNO
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 20
CAPITULO 5
Enumerar Etiquetas de los PIs.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 21
A) Para aadir la numeracin de los elementos de curvas:
B) Luego de presionar el botn ADD seleccionamos el alineamiento.
Nota: Como ya est configurado nuestra plantilla se nos hace ms fcil la numeracin de las curvas. Label: ELEMENTOS DE CURVAS
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 22
CAPITULO 6
Insertar Cuadros de elementos de Curvas.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 23
A) Para aadir Cuadro de Elementos de Curvas.
B) Seleccionamos el estilo de nuestra plantilla y se genera nuestro cuadro de elementos de curvas.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 24
C) Ya tenemos los datos primordiales para un diseo de una va.
Nota: Con nuestra Plantilla para carreteras generamos nuestro cuadro de elementos de curvas. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: CUADRO DE ELEMENTOS DE CURVA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 25
CAPITULO 7
Insertar Perfil Longitudinal
O
Alineamiento Vertical
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 26
A) Seleccionar el eje principal se activa un men de Alignment EJE DE ACCESO luego presionar en Surface Profile: nos sale el cuadro de Create Profile From Surface:
B) Luego de Agregar la superficie (Terreno natural) presionamos Draw in profile view:
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 27
C) Seleccionando el perfil de nuestra plantilla le damos en siguiente luego realizamos click Create profile view y generamos nuestro Perfil longitudinal:
D) Cambiar estilo de perfil longitudinal (Opcional): Seleccionamos el perfil click
derecho y seleccionamos Profile View Properties
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 28
D1) Seleccionamos el estilo PERFIL CARRETERA_SECCIN_HV (Opcional)
D2) Y en la pestaa Bands seleccionamos Import Band Set y seleccionamos BANDAS DE PERFIL_SECCION_HV (Opcional)
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 29
D3) Y en la columna Profile2 cambiamos a Rasante y en la columna Data source seleccionar lneas de muestreo. (Opcional)
D4) Demostrando en las curvas cada 10 metros. (Opcional)
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 30
Nota: Con nuestra Plantilla para carreteras generamos nuestro Perfil Longitudinal configurado Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Label: PERFIL CARRETERA_SC H 1:1000 V 1:200 HV Label: PERFIL CARRETERA_SECCIN_HV Select Band: BANDAS EN PERFIL- HV Select Band: BANDAS DE PERFIL_SECCION_HV
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 31
CAPITULO 8
Trazo de Rasante en Alineamiento Vertical.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 32
A) Hacemos click en el perfil recin creado y seleccionamos botn Profile Creation tools
B) Hacemos click en la pestaa Design Criteria y seleccionamos la norma AASHTO 2011.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 33
C) Saliendo el siguiente cuadro seleccionamos para dibujar la Rasante:
D) Recuerda que la Radio de Curvas Vertical deben ser mltiplo de 5 y 10:
Nota: Con nuestra Plantilla podrs modificar a la necesidad del proyecto Style: ALENEAMIENTO VERTICAL Label: DISEO GEOMETRICO VERTICAL
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 34
CAPITULO 9
Actualizacin de Datos de las Bandas del Perfil.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 35
A) Hacemos click derecho en el Perfil Longitudinal y seleccionamos Profile view properties y en columna Profile 2, seleccionamos Rasante; luego se actualiza la banda de nuestro perfil.
B) Aqu la banda de nuestro perfil actualizado con la Rasante.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 36
Nota: Es fcil ejecutar nuestro proyecto con una Plantilla de carretera bien configurada. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Profile Data: ALTURA DE CORTE Profile Data: ALTURA DE RELLENO Profile Data: COTA RASANTE Profile Data: COTA TERRENO Profile Data: PROGRESIVA Vertical Geometry: PENDIENTE Horinzontal Geometry: ALINEAMIENTO Sectional Data: ALTURA DE RELLENO
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 37
CAPITULO 10
Definiendo y Creacin de Obra Lineal Corridor.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 38
A) Ingresamos al cuadro de Create Corridor: Home/Corridor
B) En lo que es Ensamble tenemos tres tipos de materiales: Material suelto/ Roca fija/ Roca suelta. Que tienen diferentes tipos de cortes segn a la norma. Recuerden que aqu es donde defines los costos para el movimiento de tierra segn el tipo de material a utilizar.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 39
C) Lo podemos modificar en: Prospector/Asssemblies click derecho sobre uno de ellos y seleccionamos Properties.
D) Aqu realizamos los cambios para la calzada/ Berma/ Cuneta/ Corte y Relleno. A la necesidad del proyecto.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 40
E) Definimos la Obra Lineal Home /corridor Agregamos material en las progresivas segn estudio de suelo: Add Region para cada material.
F) Haciendo click en Frecuency agregamos el alineamiento cada 10 m. en las curvas y espirales:
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 41
G) Y para activar la superficie hacemos click en Target:
H) Haciendo click en Ok, aplicar, aceptar y Rebuild corridor se generara nuestra Obra Lineal.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 42
I) Definiendo Superficie para la obra lineal cCorridor
- Seleccionamos corridor (Obra Lineal) click derecho Corridor Properties
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 43
- En la pestaa Boundaries Creamos un Daylight.
- Aplicar / Rebuild the corridor / Aceptar Ya tenemos superficie para la Obra Lineal.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 44
Nota: Con nuestras plantillas ya podemos definir el tipo de material a utilizar para el proyecto. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Assembly: MATERIAL SUELTO Assembly: ROCA FIJA Assembly: ROCA SUELTA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 45
CAPITULO 11
Crear Lneas de Muestreo Sample Lines.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 46
A) Para crear lneas de muestreo nos vamos a Home/ Sample Line/ Click derecho/ Seleccionamos nuestro alineamiento y ok.
B) Luego de configurar nuestra plantilla para este cuadro elegimos Ok. Seleccionamos la opcin By range by stations nos sale otro cuadro en donde vemos que este configurado las distancias para el muestreo.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 47
C) Esta es la representacin de las lneas de muestreo en planta.
Nota: Con nuestras plantillas ya podemos representar las lneas de muestreo en Planta. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: LINEAS DE SECCION Label: SECCIN_NOMBRE Label: SECCIN_NOMBRE_SIMBOLO DE CORTE Label: SECCIN_NUMERO Label: SECCIN_PROGRESIVA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 48
CAPITULO 12
Insertar Seccin Transversal.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 49
A) Nos vamos Home/Section Views/Create multiples views.
B) Damos en siguientes hasta dar con Create section views.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 50
C) Bien ahora tenemos la seccin tpica de tres tipos de material.
D) Calcular peraltes - Nos vamos a Prostector/Alignmets/Centerline Alignmets/EJE DE
ACCESO/Edit superrelevation luego Calculate.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 51
- Luego para el siguiente cuadro ingresamos para Berma: 0.50m ancho. Bombeo -4% y la norma ASSHOT 2011 12% .. Ver figura.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 52
- Se genera un cuadro calculado de peraltes para todas las curvas.
- Ahora actualizar el corridor para visualizar los cambios en las secciones de vistas mltiples.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 53
- Visualizacin del peralte calculado en las secciones.
E) Configuracin del Corte y Relleno de las Secciones Transversales.
- En el men Analyze/Compute materials.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 54
- En este cuadro seleccionamos: El alineamiento y lneas de muestreo:
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 55
- Bien de esta manera se realiza el clculo de corte y relleno en las secciones.
Nota: Con nuestras plantillas ya podemos representar secciones mltiples. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: SECCIN TIPICA Plot Style: AREA DE IMPRESIN Select Bands: COTA TERRENO_RASANTE
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 56
CAPITULO 13
Visualizacin del Reporte Movimiento de Tierra
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 57
A) Bueno ahora visualizamos los reportes:
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 58
B) Podemos copiar y pegar a Excel.
C) Ahora insertamos la tabla en el mismo civil con nuestra plantilla: Hacer click Total volumen table.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 59
D) Visualizamos la Tabla de Volumen Movimiento de Tierra.
E) Visualizacin de texto de corte y relleno en la seccin. Hacemos click en la seccin tpica, click derecho y seleccionamos Section View Group Properties
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 60
F) En esta tabla hacemos click en la columna Change Volumen Table
G) As es como se debe tener una seccin tpica de rea de corte y rea de relleno.
Nota: Con nuestras plantillas ya podemos representar nuestra tabla de volmenes. Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015 Para este captulo hemos tomado de la Plantilla: Style: TABLA DE VOLUMENES Style: AREA DE CORTE Y RELLENO
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 61
CAPITULO 14
Mejorar Diseo para la Presentacin Final.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 62
A) Borrar curvas de nivel mediante triangulacin.
B) Etiquetar curvas de nivel.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 63
C) Ubicacin final de Planta, Perfil Longitudinal, cuadros de volmenes, secciones.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 64
CAPITULO 15
Crear Cuadricula de Coordenadas.
.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 65
A) Para generar la cuadricula de coordenadas debemos dibujar un rectngulo: luego Prospetor/Surface/ Create Surface
B) En el siguiente cuadro escribir y escoger el estilo de Cuadricula de Coordenadas.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 66
C) Aadir el contorno a la cuadricula de coordenadas: Prospector/Superficie/CUADRICULA DE COORDENADAS/Definition/Contourns
D) Damos Ok y seleccionamos el rectngulo.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 67
E) Etiquetar Cuadricula de coordenadas. En el men Annotate/Add Labels/Surface/Add Surface Labes
F) Etiquetamos el cuadro de coordenadas.
Nota: Como tenemos la plantilla creada se nos hace ms fcil etiquetar el Cuadro de Coordenadas. Note: ESTE INFERIOR Note: ESTE SUPERIOR Note: NORTE IZQUIERDA Note: NORTE DERECHA
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 68
CAPITULO 16
Recorrido Virtual de la Va.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 69
A) Prospector/Surface/Create Surface y en el cuadro siguiente damos el nombre de RECORRIDO VIRTUAL y Ok.
B) Seguir los siguientes pasos segn la imagen.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 70
C) En el siguiente cuadro escogemos TERRENO NATURAL.
D) Seguido nos vamos a Boundaries/Add... Poner valores, ver imagen.
E) En la parte inferior del comando seleccionar y hacemos click en Superficie, luego botn secundario elegimos OBRA LINEAL y nos sale el siguiente cuadro.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 71
F) Ocultemos la superficie del TERRENO NATURAL ahora para visualizar el Recorrido Virtual debemos de seleccionar nuestro OBRA LINEAL (Corridor) y en el men aparecer el botn Drive y seleccionamos de nuevo la OBRA LINEAL y damos ok al cuadro que aparece.
G) Dando click en Play entramos al recorrido virtual.
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
CONSULTOR EXTERNO AUTOCAD CIVIL 3D
Autor: Harold A. Valdivia Novoa E-mail: [email protected] Cel.: 975-136256 Pgina 72
Tambin leer: DESARROLLO DE ESTILOS Y ETIQUETAS PARA UNA PLANTILLA DE DISEO GEOMETRICO DE CARRETERAS CON AUTOCAD CIVIL 3D 2015
FIN
You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)
Top Related