S E N I O R Y E A R S
I N D U S T R I A L A R T S
Manitoba Curriculum Frameworkof Outcomes
2009Manitoba Educat ion, Ci t izenship and Youth
Manitoba Education, Citizenship and Youth Cataloguing in Publication Data
607.12712 Senior years industrial arts: Manitobacurriculum framework of outcomes
ISBN-13: 978-0-7711-3676-4
1. Industrial arts—Study and teaching(Secondary)—Manitoba. 2. Industrial arts—Curricula. I. Manitoba. Manitoba Education,Citizenship and Youth.
Copyright © 2009, the Government of Manitoba as represented by the Ministerof Education, Citizenship and Youth.
Manitoba Education, Citizenship and YouthSchool Programs DivisionWinnipeg, Manitoba, Canada
Every effort has been made to acknowledge original sources and to comply withcopyright law. If cases are identified where this has not been done, please notifyManitoba Education, Citizenship and Youth. Errors or omissions will be correctedin a future edition. Sincere thanks to the authors and publishers who allowedtheir original material to be used.
All images found in this document are copyright protected and should not beextracted, accessed, or reproduced for any purpose other than for their intendededucational use in this document.
Print copies of this resource can be purchased from the Manitoba TextBook Bureau (stock number 80444). Order online at <www.mtbb.mb.ca>.
This resource is also available on the Manitoba Education, Citizenship andYouth website at <www.edu.gov.mb.ca/k12/cur/teched/ind_arts.html>.
Websites are subject to change without notice.
A c k n o w l e d g e m e n t s iii
A C K N O W L E D G E M E N T S
Manitoba Education, Citizenship and Youth gratefully acknowledges the contributions of the following individuals in thedevelopment of Senior Years Industrial Arts: Manitoba Curriculum Framework of Outcomes.
Continued
Principal Writer Dennis Wasylyniuk
Committee Members Larry Argue Oak Park High SchoolPembina Trails School Division
Brad Badiuk Kelvin High SchoolWinnipeg School Division
Doug Cameron Glenlawn CollegiateLouis Riel School Division
Lee Cole Carman CollegiatePrairie Rose School Division
Ralph Masi Murdoch MackayRiver East — Transcona School Division
Kurt Proctor Industrial Arts Teacher EducationRed River College
Carl Sauerborn Gimli High SchoolEvergreen School Division
Brian Weiser Westwood CollegiateSt. James-Assiniboia School Division
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e siv
Manitoba Education, Citizenshipand Youth Staff
Louise BoissonneaultPublications Editor(after August 2005)
Document Production Services UnitEducational Resources Branch
Lee-Ila BotheCoordinator
Document Production Services UnitEducational Resources Branch
Diane CooleyProject Manager(until April 2007)
Curriculum UnitInstruction, Curriculum and Assessment Branch
Peter FullerConsultant
Program and Policy Services UnitInstruction, Curriculum and Assessment Branch
Darryl GervaisProject Manager(after February 2008)
Development UnitInstruction, Curriculum and Assessment Branch
Aileen NajduchProject Manager(April 2007 to February 2008)
Development UnitInstruction, Curriculum and Assessment Branch
Ken NimchukProject Leader
Learning Support and Technologies UnitInstruction, Curriculum and Assessment Branch
Jan OakleyPublications Editor(until July 2005)
Production Support UnitInstruction, Curriculum and Assessment Branch
Lindsay WalkerDesktop Publisher
Document Production Services UnitEducational Resources Branch
C o n t e n t s v
Acknowledgements iii
Introduction 1Background 1
Vision 2
Overview of Senior Years Industrial Arts Framework 5
Framework Rationale 5
Industrial Arts Strands 6
Instructional Philosophy 6
Implementation Techniques 8
Instructional Approaches and Assessment 8
Glossary of Instructional Approaches 10
Learning Outcomes Structure 13
Senior Years General Learning Outcomes 15
General Learning Outcomes 17
Fundamental Skills 18
Personal Skills 18
Production Skills 19
Senior Years Specific Learning Outcomes 23
A Guide to Reading Learning Outcome Numbering 25
Senior Years Drafting Design Technology 27
Fundamental Skills 29
Personal Skills 32
Production Skills 38
Senior Years Electricity/Electronics Technology 47
Fundamental Skills 49
Personal Skills 52
Production Skills 58
Senior Years Graphic Communication Technology 65
Fundamental Skills 67
Personal Skills 70
Production Skills 76
Senior Years Metalwork Technology 83
Fundamental Skills 85
Personal Skills 88
Production Skills 94
C O N T E N T S
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e svi
Senior Years Power Mechanics Technology 101
Fundamental Skills 103
Personal Skills 106
Production Skills 112
Senior Years Woodwork Technology 121
Fundamental Skills 123
Personal Skills 126
Production Skills 132
Appendices 139
Appendix A: Writing Learning Outcomes 141
Appendix B: A Design/Problem-Solving Process 145
References 147
I n t r o d u c t i o n 1
I N T R O D U C T I O N
Background
Industrial Arts Rationale
Industrial Arts education provides lifelong learning patternsfor living and working effectively in a changing technologicalenvironment. Participants in Industrial Arts programmingwork actively in a hands-on environment with technologicaltools, materials, and processes to transform concepts andideas into goods and services. Problems, ideas, and conceptsare explored from the research/investigation stage to productconstruction, and ultimately to final testing and assessment/evaluation of the goods produced. Because of the changingnature of society and the workplace, the practical skills andknowledge developed in Industrial Arts education arerelevant to many other areas of life.
Education needs to be about developing foundation skills.Industrial Arts provides students the opportunity to workindependently and co-operatively as they apply decision-making, problem-solving, and critical-thinking skills toproblems and/or issues. Additional skills such as inferring,synthesizing, analyzing, and evaluating, as well as a completerange of communication skills including listening, speaking,representing, viewing, reading, and writing are part ofIndustrial Arts classrooms. These learning environments offerchallenging, stimulating, and enjoyable activities thatmotivate people.
Curricular Foundations
This document represents the first major Senior YearsIndustrial Arts curriculum review since the mid-1980s. Thatreview resulted in the development of eighteen Grade 10 toGrade 12 Industrial Arts courses (Drafting 101, 201, 301;Electricity/Electronics 101, 201, 301; Graphics 101, 201, 301;Metalwork 101, 201, 301; Power Mechanics 101, 201, 301; andWoodwork 101, 201, 301). The framework serves as a basis forthe development of Grade 9 to Grade 12 Industrial Artscourses. It replaces the former curriculum documentsmentioned above.
The need to make curricula more responsive to the needs ofthe students and the community has resulted in significantchanges. The emphasis in Industrial Arts courses on problem-solving, teamwork skills, creative design, and diverselearning styles is reflected in the new framework. The shiftfrom previous curricula structures to the new frameworkinvolves the following major changes:
Former Guidelines New Frameworks
1. Goals and objectives2. Focus on teacher inputs
3. Teaching concepts separately4. Layers of learning5. Linear, lock-step sequential
outline of content6. Passive participation
1. Student Learning Outcomes2. Focus on how students learn,
and on integrated componentsto learning
3. Themes and concepts4. Spirals of learning5. Thinking and problem-
solving skills6. Active participation
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s2
Industrial Arts programming teaches students to applyknowledge and skills from other subject areas as they learnnew skills to analyze problems, design solutions, and createproducts.
This document builds on recent education research, including
� the restructuring of educational objectives as GeneralLearning Outcomes and Specific Learning Outcomes
� brain-based research which has led to theory on multipleintelligences, learning styles, and thinking styles
� authentic assessment� school-to-work transition skills
Vision
Learning Environment
Industrial Arts students are immersed in a holistic learningenvironment that prepares them to adapt to a society in whichthe workplace is rapidly changing with advancing technologyand blurred career lines.
Industrial Arts students gain a unique, meaningful, andpractical experience while learning in a facility that relates toout-of-school experiences. They gain a variety of life andemployability skills while working with hands-onapplications.
Lifelong Skills
The Industrial Arts experience and environment leads to thedevelopment of life and employability skills. Students gaintechnological literacy and an array of life skills. They learn to
� manipulate materials and tools� interact with processes� define, analyze, and solve problems� design and create products� apply and integrate knowledge� work safely� manage time� manage information� work on teams
Life Skills
Literacy and CommunicationProblem Solving
Production Skills
Applied Language Arts
Applied Sciences
Applied MathematicsRelevance to Industry
Applications to Industry
Technology Applications
Career Exploration
General Outcomes
Technology for Learning andLiving Entrepreneurship
Human Relations
Sustainable Development
Cultural Diversity
I n t r o d u c t i o n 3
� communicate� observe and record data� show initiative� be responsible� be adaptable
Integration of Experience
Industrial Arts facilities provide the venue for the integrationof learning experiences for students. Students gain a newdepth of understanding because of the integration ofknowledge and skills in a practical setting. Industrial Artscourses integrate a blend of knowledge in the physical andbiological sciences, social sciences, and the arts andhumanities, with activities that incorporate the fourmodalities of learning (kinesthetic, tactile, visual, andauditory).
This integration can occur naturally for the learner, or it mayhappen through a teacher-directed connection with othersubject areas—a process which the Industrial Arts learningenvironment innately encourages. This serves to addrelevance to the student’s overall learning experience.
Active Learner
A student of Industrial Arts is an active learner in an activity-based course that demands thinking and doing. The studentwill
� take an active role in negotiating and planning specificactivities to fulfill the learning outcomes
� participate in activities from design and development,through production and evaluations of activities
� practise and execute the necessary skills in applyingproduction skills
� use combinations of intellectual, physical, and multiplesensory skills
� participate as a member of a team� transfer and adapt previous learned knowledge, skills,
and attitude
Teacher’s Role
The teacher’s role is to
� be a facilitator and a co-learner� act as a role model� plan and manage themes and concepts� provide opportunities for students to develop skills and
knowledge� be prepared to venture with students into unpredictable
situations where, together, solutions to technologicalproblems will be pursued
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s4
Senior Years Industrial Arts Framework Purpose
In Manitoba, Industrial Arts programming represents a widevariety of learning opportunities that focus on fundamentalpersonal and production skill development. This frameworkstrives to affirm and strengthen current practices whileencouraging teachers to broaden the focus of their courses.
This framework will serve to
� enhance and reaffirm the value of Industrial Arts courses� provide a framework for the development of further
support documents for Industrial Arts� guide teachers in enhancing current practices� strengthen and revitalize programming� provide General Learning Outcomes that introduce two
new skill sets for all Industrial Arts courses� provide Specific Learning Outcomes that are common to
all Senior Years Industrial Arts strands
O v e r v i e w o f S e n i o r Y e a r s I n d u s t r i a l A r t s F r a m e w o r k 5
Framework Rationale
This framework has been designed to provide students withthe opportunity to develop transferable learning skills. Theselearning skills are grouped into three sets:
� Fundamental Skills—the basic skills for study inIndustrial Arts
� Personal Skills—the basic skills for personal effectivenessand growth
� Production Skills—the basic skills for production andfabrication
These skill sets are reflected in work done by The ConferenceBoard of Canada (Employability Skills 2000+), HumanResources Development Canada (Essential Skills ResearchProject), and The National Life/Work Centre (The Blueprint forLife/Work Designs).
The framework is designed to support and broaden the focusof Industrial Arts. It is intended to be used by teachers tostrengthen and revitalize programming. The GeneralLearning Outcomes are interrelated and interdependent. Eachoutcome is to be achieved through a variety of learningstrategies and experiences.
Fundamental Skills
Drafting Design Technology
Electricity/ElectronicsTechnology
Graphic CommunicationTechnology
MetalworkTechnology
Power MechanicsTechnology
Woodwork Technology
Industrial Arts Strands
Personal Skills
Production Skills
Skill Sets
Three skill sets apply to each Industrial Arts strand.
O V E R V I E W O F S E N I O R Y E A R S I N D U S T R I A L A R T S F R A M E W O R K
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s6
Industrial Arts Strands
Industrial Arts is available in a variety of strands based onfacility configurations. The following chart outlines IndustrialArts strands for Middle Years and Senior Years students.
Instructional Philosophy
Industrial Arts teachers use various approaches to guidestudent learning. It is essential to recognize and utilizestudent learning styles, thinking styles, and capabilities. Thefollowing text summarizes three models that describe studentdifferences in these areas.
Learning Styles
The model developed by Ken Dunn and Rita Dunn ofSt. John’s University, New York, classifies students accordingto their learning styles:
� Auditory learners absorb spoken material easily and arelikely to ask for information rather than read printedinstructions.
� Visual learners learn best from information that they reador see.
� Tactile learners learn best by handling materials, writing,drawing, and being involved in concrete experiences.
� Kinesthetic learners learn best by moving and doing, bytaking part in activities that have direct relevance to theirlives.
Dunn and Dunn believe that most people have two highlydeveloped learning styles, and that within a class of 30students, 22 will be fairly balanced in their ability to take ininformation in a variety of ways.
Middle Years Senior Years
Titles Titles
Manufacturing� Metalwork� Plastics� Woodworking
Graphic Communications� Drafting� Graphic Arts� Graphic Communications
Power and Energy� Electricity/Electronics� Power Mechanics� Power/Energy
Construction
Drafting Design� Drafting Design Technology
Electricity/Electronics� Electricity/Electronics
Technology
Graphic Communication� Graphic Communication
Technology
Metalwork� Metalwork Technology
Power Mechanics� Power Mechanics Technology
Woodwork� Woodwork Technology� Construction Technology� Furniture Design Technology� Manufacturing Technology
Applied Technology 40S
O v e r v i e w o f S e n i o r Y e a r s I n d u s t r i a l A r t s F r a m e w o r k 7
Thinking Styles
Anthony Gregorc (1982) of the University of Connecticut hasdeveloped a theory of thinking styles based on two variables:the way we view the world (concretely or abstractly) and theway we order the world (in sequential order or randomorder). In Gregorc’s framework, these two variables combineto describe four thinking styles:
� Concrete sequential thinkers are based in the physicalworld that they can detect through their senses. Theynotice and recall details easily, and remember facts,formulas, and rules with ease. They learn well through“hands-on” experiences.
� Concrete random thinkers are experimenters/ divergentthinkers, willing to take the intuitive leaps necessary forcreative thought. They have a strong need to findalternatives and to do things in their own way.
� Abstract sequential thinkers love the world of theory andabstract thought. Their thinking processes are logical,rational, and intellectual. They prefer to work alone ratherthan in groups.
� Abstract random thinkers organize information throughreflection, and thrive in unstructured, people-orientedenvironments. They live in the world of feelings andemotions, and learn best when information ispersonalized.
Multiple Intelligences
The theory of multiple intelligences is a cognitive modeldeveloped by Harvard psychologist Howard Gardner.Gardner’s theory is that each of the following sevenintelligences has an evolutionary history, its own symbolicsystem, and a separate locus in the human brain:
� Verbal/linguistic intelligence is responsible for theproduction of language and all of the complex possibilitiesthat follow: storytelling, abstract reasoning, symbolicthinking, conceptual patterning, and, of course, thewritten word.
� Logical/mathematical intelligence is most oftenassociated with “scientific thinking,” deductive reasoning,and problem solving. This intelligence involves thecapacity to recognize patterns, to work with abstractsymbols such as numbers and geometric shapes, and tosee connections between separate pieces of information.
� Visual/spatial intelligence deals with the visual arts,navigation and map-making, architecture, and gamessuch as chess. The key sensory base of this intelligence issight, but also the ability to form mental images.
� Body/kinesthetic intelligence is the ability to use thebody to express emotion (as in dance and body language),to play a game, or to devise an invention. Individuals withhigh body/kinesthetic intelligence thrive on hands-onexperience; they “learn to do by doing.”
__________
Multiple Intelligences: From Seven Ways of Knowing: Teaching for Multiple Intelligences, Second Edition, by David Lazear. © 1991 IRI/SkyLight Training and Publishing.Reprinted by permission of SkyLight Professional Development, <www.skylightedu.com> or 1-800-348-4474.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s8
� Musical/rhythmic intelligence includes such capacities asthe recognition and use of rhythmic and tonal patterns,and sensitivity to sounds from the environment, thehuman voice, and musical instruments. Many childrenlearn the alphabet through this intelligence.
� Interpersonal intelligence involves the ability tocommunicate verbally and non-verbally, to workco-operatively in a group, and to observe the moods,temperament, and intentions of others. Individuals withhigh interpersonal intelligence are able to imagine andempathize with the experience of others.
� Intrapersonal intelligence involves knowledge of theself—of feelings, thinking processes, and spiritualrealities. This intelligence involves our capacities for self-reflection, to experience wholeness and unity, to perceivehigher states of consciousness, and to dream of andactualize the possible.
Gardner’s multiple intelligences theory proposes that eachperson has capabilities of varying degree in all sevenintelligences, and that we perform most functions through acomplex interaction of several intelligences.
Implementation Techniques
The learning styles previously described can beaccommodated through a number of instructional focuses inan Industrial Arts facility. Some common techniques are
� tools and materials focus—focusing on the equipmentand supplies used
� process focus—emphasizing the systematic use ofmaterials
� design/problem-solving focus—developing the creativeproblem-solving and decision-making processes in ageneric sense
� project or product focus—focusing on the net result of theskills developed
Instructional Approaches and Assessment
The General Learning Outcomes for Industrial Arts coursespromote skill development and reflective learning. As there isno single way to teach or learn, teachers will organize theircourses using one or a combination of the previouslymentioned implementation techniques and then, while takinginto account their students’ learning and thinking styles, willuse their professional judgment to decide which instructionalapproach will be most effective in promoting the learning ofknowledge and skills. The “Instructional Approaches”diagram displays instructional approaches and methods ofapplication.
O v e r v i e w o f S e n i o r Y e a r s I n d u s t r i a l A r t s F r a m e w o r k 9
Students learn most effectively when their studies are rootedin concrete learning experiences, related to a particularcontext or situation, and applied to their world whereappropriate. Ideas and understandings that students developshould be progressively extended and reconstructed asstudents grow in their experiences and their ability toconceptualize. Learning involves the process of linking newlyconstructed understandings with prior knowledge, andadding new contexts and experiences to currentunderstandings.
To achieve the vision of Industrial Arts education, studentsmust increasingly become engaged in the planning,development, and assessment of their own learningexperiences. They should have the opportunity to work co-operatively with other students, to initiate investigations, tocommunicate their findings, and to complete projects thatdemonstrate their learning.
To assist teachers in their planning for instruction,assessment, evaluation, and reporting, Manitoba Education,Citizenship and Youth recommends that at the beginning of ablock of instruction, teachers and students identify expectedstudent learning outcomes and establish performance criteria.It is important that these criteria correspond with the studentlearning outcomes. This communication between studentsand teachers helps to identify clearly what needs to beaccomplished, thereby assisting the learning process.
I N S T R U C T I O N A L A P P R O A C H E S
Direct InstructionLesson OverviewsGuest SpeakersExplicit Teaching
Instruction of Strategic ProcessesModelling
Didactic QuestioningDemonstrations
Mini-LessonsGuides for ReadingListening, Viewing
InteractiveInstruction
DebatesRole-Playing
PanelsBrainstormingPeer Tutoring
DiscussionCo-operative Learning Groups
Problem SolvingTalking CirclesPeer EditingInterviewing
Experiential LearningField TripsSimulations
Primary ResearchGames
Focused ImagingObservationsRole-Playing
Surveys
Independent StudyComputer-Assisted Instruction
EssaysReports
Study GuidesLearning Contracts
HomeworkInquiry and Research Projects
Learning Centres
Indirect InstructionJigsaw
Problem SolvingInquiry and Research
Reading and Viewing for MeaningReflection—Learning Logs
Admit/Exit SlipsGallery Walks
Concept Mapping
__________
Instructional Approaches: Figure adapted, with permission, from Saskatchewan Education. Instructional Approaches: A Framework for Professional Practice. Copyright © 1991by Saskatchewan Education.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s10
When students are aware of expected learning outcomes, theywill be more focused on the learning and more likely to assesstheir own progress. Furthermore, they can participate increating appropriate assessment and evaluation criteria.Teachers are encouraged to use a variety of learningexperiences and assessment and evaluation methods andtools that are valid, reliable, and fair to students.Consideration needs to be given to the many ways studentslearn, their diverse backgrounds and needs, as well asmaximizing active learning time, and making learningmeaningful.
Glossary of Instructional Approaches
Direct Instruction
Lesson Overviews—Teachers construct the frame that bestsuits their subject matter, grade, and classroom and lessonorganization. Overviews are often put on a transparency orerasable poster so they can be reused with each class. Thepurpose is to help students focus on the goals of the lessonand to place the lesson in the context of a unit.
Guest Speakers—Inviting professionals or those withinformation on topics being studied offers students theopportunity to examine topics from a personal point of viewand to obtain current, reality-based responses to questions.
Explicit Teaching—Teacher-directed lectures can providestudents with information that may be required before high-order thinking can occur. Teachers are encouraged to provideinformation which meets at least two learning modalities
(visual, auditory, tactile, and kinesthetic) by using visuals,writing on the board, and supplying handouts and readingnotes.
Instruction of Strategic Processes—Strategic processesoutline the steps required to complete a task and move on tothe next level.
Modelling (role-playing, think alouds, anddemonstrations)—Teachers model their use of strategies sothat students can emulate them. Teachers verbalize allthoughts for students as they demonstrate skills or processes.After several modeling experiences, students should practiseusing the strategy in pairs. Ultimately, students should workindependently with the strategy.
Didactic Questioning—By asking leading questions, teacherscan draw information and answers from students.
Demonstrations—A teacher, student, or guest demonstrates atechnique to students. This technique works best if studentsare allowed to practise the technique on their own or in pairsfollowing the demonstration. The teacher or fellow studentsoffer feedback. Students should be given the opportunity toreflect on their proficiency and areas for improvement.
Mini-Lessons—Mini-lessons are lessons that are 20 minutesin length. Recent brain research indicates thatlearning/retention occurs in the first 20 minutes of each class.
Guides for Reading, Listening, Viewing—Providingstudents with guides (e.g., guided notes for a video) helpsthem to identify important information and encouragesattentiveness.
O v e r v i e w o f S e n i o r Y e a r s I n d u s t r i a l A r t s F r a m e w o r k 11
Indirect Instruction
Jigsaw—Individuals or small groups each explore a differenttopic or a different area of the same topic. Individuals orgroups are then responsible for teaching their newly acquiredknowledge to the rest of the class.
Problem Solving—Teachers can stimulate student thinkingby presenting a situation in which the student works througha process which leads to a solution.
Inquiry and Research—Individually, in pairs, or in smallgroups, students explore topics and present their findings tothe class via an oral presentation or Gallery Walk.
Reading and Viewing for Meaning—These are techniques ofreading print material and viewing visual media to becomemore conscious, discerning, critical, and appreciative of thetexts.
Reflection—Learning Logs: Students regularly write short,spontaneous, exploratory, personal pieces of writing aboutthe content they are studying. It is writing for thinking andnot for creating a polished product.
Admit/Exit Slips—Students fill in these small slips at thebeginning and end of the class. They help students to focus onwhat they expect to learn, and to reflect on what they havelearned. This provides the teacher with information onstudent learning.
Gallery Walks—Teachers or students display informationand samples on various topics throughout the room.Individually, in groups, or as a class, students circulate andare presented different information at each station.
Concept Mapping—Teachers assign students a word or ideaand have them generate related words and/or topics.Students then examine the relationships between the wordsand ideas they have generated.
Experiential Learning
Field Trips—Students visit sites that relate to topics beingstudied. The most successful excursions outside the classroomare those that are organized because students have asked tovisit a particular site to further some aspect of research theyhave undertaken.
Simulations—Students practise a skill or technique undercontrolled or ideal conditions with teacher or peer guidancebefore they are given the opportunity to perform on theirown.
Primary Research—Primary research explores original (first-hand) sources. It may include interviews or reading first-handaccounts of a person’s experience or findings.
Games—Teachers conduct activities based on popular boardor television games. Questions can be based on course contentand can be written by the teacher or the students. Games canbe used to review information or to activate learning prior tostarting a unit.
Focused Imaging—Teachers talk students through an event.Students may choose to close their eyes, listen, and visualizeas the teacher describes a process, event, or location. Focusedimaging can be enhanced with sound effects.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s12
Observations—Students and the teacher identify phenomenathey are looking for and observe the frequency of occurrence.Observations can be used to determine how a process takesplace. It is important that teachers remind students to remainobjective (record what they see) and to not make assumptionsregarding causes of phenomena.
Role-Playing—The teacher provides, or the students writeskits which students act out in an effort to explain ordemonstrate an idea or the sequence of a process.
Surveys—Students or the teacher develop questions anddetermine an audience in an effort to study a phenomenon,belief, or the perceptions of others.
Independent Study
Computer-Assisted Instruction (CAI)—Software (computerprograms) can provide exercises for drill and practise, rapidevaluation of student response, student feedback, concreterepresentations of abstract concepts, and more one-on-oneinstructional time.
Essays and Reports—Students research and write on a topicassigned by the teacher, or one that they have chosenthemselves.
Study Guides—Students review content through the use of adocument that provides the framework of knowledge coveredin a unit or course.
Learning Contracts—The teacher and students create acontract or proposal specifying the topic, learning outcomes,experiences, products, resources, timelines, and assessment.
Homework, Inquiry, and Research Projects—Students aregiven the opportunity to independently research and examineinformation.
Learning Centres—Teachers organize the classroom intovarious activity or learning stations. These offer opportunitiesfor independent inquiry and exposure to a wide variety ofmaterials and sources of information.
Interactive Instruction
Debates—The class is divided into two groups (teams). Eachteam is assigned one side of an issue to defend or promote.Teams are responsible for generating support for their side ofthe issue. Following the time assigned for developingarguments, students individually argue points on behalf oftheir team by introducing new points or offering a rebuttal topoints made by the other team.
Role-Playing—The teacher provides or the students writeskits which students act out in an effort to explain ordemonstrate an idea or sequence of a process.
Panels—Panels are groups of people with first-handknowledge or experience on a topic.
Brainstorming—Students generate ideas and information as aresult of contributing what they already know, and buildingon the ideas of others.
Peer Tutoring—Students teach and learn from one another asthey share their work.
O v e r v i e w o f S e n i o r Y e a r s I n d u s t r i a l A r t s F r a m e w o r k 13
Discussion—Discussion is the most useful way oftransmitting information, learning what students think andknow, and building a sense of classroom identity, when allclass members have a chance to speak before anyoneresponds twice.
Co-operative Learning Groups—Students are placed intosmall groups or teams, based on the teacher’s criteria, andwork together at various times to achieve common learninggoals.
Problem Solving—Problem solving is a meaningful task thatcentres on overcoming constraints or limiting conditions.
Talking Circles—Based on First Nations teachings, talkingcircles create a safe environment for discussion of conflicts,difficult situations, or decisions that students may face. Thisallows every student to be heard and teaches students torespect each other and build consensus.
Peer Editing—Peer editing can involve ongoing groups inwhich students give feedback on drafts of each other’swritings for the purpose of improvement.
Interviewing—Students generate questions to ask andarrange an interview with a person who has first-handknowledge and/or experience with a topic.
Learning Outcomes Structure
The following definitions were used in structuring theframework of learning outcomes.
What Are Learning Outcomes?
Learning outcomes are statements that indicate what learnerswill know or be able to do as a result of a learning activity.Learning outcomes are usually expressed as knowledge,skills, or attitudes.
Learning outcomes provide direction in the planning of alearning activity. They help to
� focus on the learner’s behaviour/action� serve as guidelines for content, instruction, and
assessment� identify specifically what should be learned� convey to learners exactly what is to be accomplished
Why Learning Outcomes?
Learning outcomes
� enable students to learn more effectively� act as a template to enable teachers to design their student
materials more effectively� enable teachers to select the teaching strategy for the
intended learning outcome based on student needs� enable teachers to select the assessment strategy based on
the materials delivered
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s14
What Are General Learning Outcomes (GLOs)?
GLOs identify the broad categories of knowledge, skills, andattitudes that students are expected to learn and be able todemonstrate in a subject area or course.
In this document many of the GLOs are accompanied byexamples. These are meant to be a guide to the breadth anddepth of a topic in those sections where teachers are asked todevelop their own Specific Learning Outcomes.
What Are Specific Learning Outcomes (SLOs)?
SLOs identify the knowledge, skills, and attitudes thatcontribute to a GLO. They are to help teachers focus onparticular aspects of knowledge and skills as they planlearning activities for their students.
What Are the Characteristics of Good LearningOutcomes?
Learning outcomes have three distinguishing characteristics.The specific action by the learner must be
1. observable2. measurable3. obtainable
G e n e r a l L e a r n i n g O u t c o m e s 17
G E N E R A L L E A R N I N G O U T C O M E S
In Industrial Arts Curricula in Manitoba the General LearningOutcomes (GLOs) are grouped into three skill sets:
Fundamental Skills and Personal Skills contain GeneralLearning Outcomes that are common to all Industrial Artsstrands.
Production Skills contain General Learning Outcomes thatare focused to each individual Industrial Arts strand.
Electricity/ElectronicsTechnology
WoodworkTechnology
PowerMechanicsTechnology
MetalworkTechnology
GraphicCommunicationTechnology
Drafting DesignTechnology� Fundamental Skills—the skills basic for study in Industrial
Arts� Personal Skills—the skills basic for personal effectiveness
and growth� Production Skills—the skills basic for production and
fabrication
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s18
Fundamental Skills
(the skills basic for study in Industrial Arts—common to allIndustrial Arts strands)
General Learning Outcomes
GLO F1 Technical Communication: Communicatetechnical ideas and designs effectively andappropriately.
GLO F2 Problem Solving: Apply effective decision-making, problem-solving, and design strategiesto a project. (Refer to Appendix B for a sampledesign/problem-solving process.)
GLO F3 Information Management: Effectively manageinformation.
Personal Skills
(the skills basic for personal effectiveness and growth—common to all Industrial Arts strands)
General Learning Outcomes
GLO P1 Time Management: Demonstrate responsibilityin time management, task completion, and inmeeting project criteria. (Note: based on theConference Board of Canada’s PersonalManagement Skills)
GLO P2 Ethical Decision-Making: Make ethical decisionsconcerning the impact of one’s activities and theuse of technology.
GLO P3 Career Planning: Develop an action plan relatingpersonal aptitudes and abilities to occupationalopportunities.
GLO P4 Safe Practices: Demonstrate safe practices withtools, machines, materials, and related processes.(Refer to: Keeping Your Facilities SAFE: A SupportDocument for Industrial Arts Teachers, ManitobaEducation and Youth, 2003.)
GLO P5 Positive Attitude: Demonstrate positive attitudesto learning in Industrial Arts facilities.
GLO P6 Teamwork: Adapt strategies to work effectively,independently, or as a team member to completea project.
G e n e r a l L e a r n i n g O u t c o m e s 19
Production Skills
(the skills basic for production and fabrication—focused toeach individual Industrial Arts strand)
General Learning Outcomes for Each Strand
Drafting Design Technology
GLO DD1 Tools and Equipment: Identify and demonstrateproper use of tools, materials, and equipmentutilized in drafting design.
GLO DD2 Drawing Interpretation: Recognize and interprettechnical drawings.
GLO DD3 Technical Sketching: Employ technical sketchingas a way of visualizing ideas.
GLO DD4 Geometric Application: Apply mathematics andgeometry in completing technical drawings.
GLO DD5 Production (Working) Drawings: Use the designprocess and problem solving to create productiondrawings.
GLO DD6 Applications: Develop an understanding ofdrafting applications and current workplacepractice.
GLO DD7 Current Innovation: Demonstrate anunderstanding of current innovation in draftingdesign processes, applications, and emergingnew technologies.
Electricity/Electronics Technology
GLO EE1 Tools and Equipment: Identify and demonstrateproper use of tools, materials, and equipmentutilized in electricity/electronics.
GLO EE2 Circuit Construction: Apply appropriatefabrication techniques to constructelectricity/electronics devices.
GLO EE3 Components: Demonstrate the function ofelectricity/electronics passive and activecomponents.
GLO EE4 Laws and Theory: Apply electricity/electronicslaws and theory.
GLO EE5 Circuits and Systems: Identify and analyze basicelectricity/electronics circuits.
GLO EE6 Applications: Develop an understanding ofelectricity/electronics applications.
GLO EE7 Current Innovation: Demonstrate anunderstanding of current innovation inelectricity/electronics, processes, applicationsand emerging new technologies.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s20
Graphic Communication Technology
GLO GC1 Image Acquisition: Demonstrate the principalsand processes involved with image acquisitionand creation.
GLO GC2 Still Image Production: Apply knowledge andpractical skills to produce still image visualrepresentations of ideas or abstract concepts.
GLO GC3 Binding and Packaging: Demonstrate and applythe knowledge and skills to finish a product fordistribution.
GLO GC4 Animated Images: Apply knowledge and skillsto produce animated images of ideas or abstractconcepts.
GLO GC5 Video Editing: Create and edit videoproductions.
GLO GC6 Current Innovation: Demonstrate anunderstanding of current innovation in graphiccommunication processes, applications, andemerging new technologies.
Metalwork Technology
GLO MW1 Metalurgy: Demonstrate an understanding ofmetallurgy—science and processes.
GLO MW2 Measurement and Layout: Use metalworkingmeasurement and layout tools correctly andefficiently.
GLO MW3 Separation: Apply separation processes to metal.
GLO MW4 Fastening: Apply fastening processes to metal.
GLO MW5 Forming and Casting: Apply forming andcasting processes to metal.
GLO MW6 Finishing: Apply finishing processes to metalconsidering their environmental impact.
GLO MW7 Current Innovation: Demonstrate anunderstanding of current innovation inmetalwork processes, applications, and emergingnew technologies.
G e n e r a l L e a r n i n g O u t c o m e s 21
Power Mechanics Technology
GLO PM1 Energy Conversion: Demonstrate anunderstanding of the theory of internalcombustion and alternate energy converters.
GLO PM2 Engine Systems: Identify and analyze variousengine systems.
GLO PM3 Electrical Systems: Understand the basicelectrical principles applied to power mechanicssystems.
GLO PM4 Mechanical Systems: Identify and analyze themechanical systems of an internal combustionengine.
GLO PM5 Chassis Systems: Identify and compare variousautomotive chassis systems.
GLO PM6 Climate Control Systems: Identify and analyzethe climate control systems in an automobile.
GLO PM7 Assembly/Disassembly Tools: Demonstrate theuse of tools and equipment in assembly anddisassembly of mechanical components.
GLO PM8 Diagnostic Tools: Use diagnostic tools andmethods to troubleshoot, diagnose, and repairpower mechanical systems.
GLO PM9 Environmental Impact and Current Innovation:Demonstrate an understanding of currentinnovation in automotive industry,environmental impacts, and emerging newtechnologies.
Woodwork Technology
GLO WW1 Wood, Products, and Processes: Demonstrate anunderstanding of woodwork— woods, woodproducts, and processes.
GLO WW2 Measurement and Layout: Use woodworkingmeasurement and layout tools, correctly andefficiently.
GLO WW3 Separation: Apply separation processes to wood.
GLO WW4 Fastening: Apply fastening processes andspecialty hardware to wood, correctly andefficiently.
GLO WW5 Wood Joints: Apply joints and joining techniquesto wood.
GLO WW6 Finishing: Apply finishing processes to woodconsidering their environmental impact.
GLO WW7 Current Innovation: Demonstrate anunderstanding of current innovation inwoodwork processes, applications, and emergingnew technologies.
S p e c i f i c L e a r n i n g O u t c o m e s 25
A G U I D E T O R E A D I N G L E A R N I N G O U T C O M E N U M B E R I N G
Production Skills
General Learning OutcomeGLO DD1 Tools and Equipment: Identify and demonstrate proper use of tools, materials, and equipment utilized in
Drafting Design.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD1.1 Identify andutilize traditional “board” toolsused in drafting such as T-squares, drafting machines,set-squares, scales, rules...
IA9.DD1.2 Use a ComputerAssisted Drafting and Design(CADD) system to produce asimple technical drawing.
IA9.DD1.3 Demonstrate aworking knowledge of variousinput and output devices in aCADD system.
IA10.DD1.1 Ô
IA10.DD1.2 Ô
IA10.DD1.3 Ô
IA11.DD1.1 Ô
IA11.DD1.2 Ô
IA11.DD1.3 Ô
IA12.DD1.1 Ô
IA12.DD1.2 Convert ideasinto 2-D and 3-D drawingsusing a CADD system andrendering software.
IA12.DD1.3 Determinehardware and softwareconfiguration required toaccomplish goals in a specifieddrafting project.
SLO (SpecificLearning Outcome)
Grade 9 Level
Drafting DesignTechnology
GLO (GeneralLearning Outcome)
First GeneralLearning Outcomeof this Set
Drafting DesignTechnology
First GeneralLearning Outcomeof this Set
SLO (Number 3)
D r a f t i n g D e s i g n T e c h n o l o g y 29
Fundamental Skills
General Learning OutcomeGLO F1 Technical Communication: Communicate technical ideas and designs effectively and appropriately.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F1.1 Use severalpresentation programs usingexisting formats to digitallycommunicate a technical idea.
IA9.F1.2 Interpret agraphic presentation of atechnical idea.
IA9.F1.3 Recognizetechnical language and terms.
IA9.F1.4 Effectively usetechnical reading skills to followa set of instructional steps.
IA10.F1.1 Design a simplepresentation using apresentation program tocommunicate a technical idea.
IA10.F1.2 Adapt a graphicpresentation of a technicalidea.
IA10.F1.3 Use technicallanguage and terms in thecorrect context.
IA10.F1.4 Adapt a set ofinstructional steps usingappropriate technical writingskills.
IA11.F1.1 Apply anadvanced presentation programeffectively to communicate atechnical idea visually.
IA11.F1.2 Create a graphicpresentation of a technicalidea.
IA11.F1.3 Create a set ofsteps using correct technicalwriting techniques to effectivelydescribe a technical process.
IA12.F1.1 Apply anappropriate combination ofdigital, graphic, oral, andwritten techniques to effectivelycommunicate a technical idea.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s30
Fundamental Skills
General Learning OutcomeGLO F2 Problem Solving: Apply effective decision-making, problem-solving, and design strategies to a project.
(Refer to Appendix B for a sample design/problem-solving process.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F2.1 Demonstrate anunderstanding of the problem-solving process in designingand producing a product.
IA9.F2.2 Identify criteriafor making and evaluatingchoices.
IA9.F2.3 Demonstrate anunderstanding of the qualitiesof good design.
IA10.F2.1 Identifyproblems and apply appropriateproblem-solving skills to solvethem.
IA10.F2.2 Apply a decision-making strategy to practicalsituations.
IA10.F2.3 Modify anexisting design to meetspecified criteria.
IA11.F2.1 Transferproblem-solving skills to real-life situations.
IA11.F2.2 Use a variety ofcritical thinking skills toevaluate situations and makedecisions.
IA11.F2.3 Create a designto meet a set of specifications.
IA12.F2.1 Research andarticulate a problem that canbe solved through technologicalmeans.
IA12.F2.2 Apply problem-solving and design skills todevelop a technological solutionto a problem.
IA12.F2.3 Analyze criticallyand act logically to evaluatesituations and make decisions.
D r a f t i n g D e s i g n T e c h n o l o g y 31
Fundamental Skills
General Learning OutcomeGLO F3 Information Management: Effectively manage information.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F3.1 Acquire andorganize information usingappropriate technology andinformation systems.
IA9.F3.2 Demonstrate theappropriate use of informationas directed.
IA10.F3.1 Apply specializedinformation and skills in real-lifesituations.
IA10.F3.2 Access and use arange of relevant information,material, and human resourceswith limited direction.
IA11.F3.1 Transfer andapply specialized informationand skills in a variety ofsituations.
IA11.F3.2 Acquire and usea range of relevant information,material, and human resources,and recognize when additionalresources are required.
IA12.F3.1 Acquire, analyze,and apply specializedinformation and skills fromvarious disciplines in a varietyof realistic circumstances.
IA12.F3.2 Support andenhance basic informationrequirements by using a widevariety of information, material,and human resources.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s32
Personal Skills
General Learning OutcomeGLO P1 Time Management: Demonstrate responsibility in time management, task completion, and in meeting
project criteria. (Note: based on the Conference Board of Canada’s Personal Management Skills)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P1.1 Demonstrateresponsibility in timemanagement.
IA9.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA9.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA9.P1.4 Complete allassigned tasks within stateddeadlines.
IA9.P1.5 Complete allprojects according to specifiedcriteria.
IA10.P1.1 Demonstrateresponsibility in timemanagement.
IA10.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA10.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA10.P1.4 Complete allassigned tasks within stateddeadlines.
IA10.P1.5 Complete allprojects according to specifiedcriteria.
IA11.P1.1 Demonstrateresponsibility in timemanagement.
IA11.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA11.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA11.P1.4 Complete allassigned tasks within stateddeadlines.
IA11.P1.5 Complete allprojects according to specifiedcriteria.
IA12.P1.1 Demonstrateresponsibility in timemanagement.
IA12.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA12.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA12.P1.4 Complete allassigned tasks within stateddeadlines.
IA12.P1.5 Complete allprojects according to specifiedcriteria.
D r a f t i n g D e s i g n T e c h n o l o g y 33
Personal Skills
General Learning OutcomeGLO P2 Ethical Decision Making: Make ethical decisions concerning the impact of one’s activities and the use of
technology.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P2.1 Make personaljudgments whether certainbehaviours/actions are right orwrong.
IA9.P2.2 Demonstrate anunderstanding of technologicalimpact on the environment,society, lifestyles, etc.
IA10.P2.1 Assess howpersonal judgments affect peermembers and/or communitymembers.
IA10.P2.2 Demonstrate anunderstanding of the impact oftechnological choices.
IA11.P2.1 Assess theimplications of personal/groupactions within the broadercommunity.
IA11.P2.2 Develop andimplement risk managementstrategies for a variety oftechnological activities.
IA12.P2.1 Analyze theimplications of personal/groupactions within the globalcontext.
IA12.P2.2 State andsupport a personal code ofethics as required.
IA12.P2.3 Demonstrateresponsible leadership inmanaging current and futuretechnologies on theenvironment and on society.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s34
Personal Skills
General Learning OutcomeGLO P3 Career Planning: Develop an action plan relating personal aptitudes and abilities to occupational
opportunities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P3.1 Identify criticalskills needed for employabilityin today's workplace.
IA9.P3.2 Demonstrate anawareness of the technologiesof specific occupations andworkplaces.
IA10.P3.1 Evaluateemployability profiles for avariety of workplaces andcareers.
IA10.P3.2 Outline skillsrequired for a specific careerpath.
IA11.P3.1 Developstrategies to assess personaltechnological literacy andcapability.
IA11.P3.2 Perform anassessment of personalstrengths and weaknesses(career portfolio).
IA12.P3.1 Assess specificpersonal skills, interests, andabilities (career portfolio).
IA12.P3.2 Develop a planfor acquiring the technologicalcapabilities required to achievea career vision (careerportfolio).
D r a f t i n g D e s i g n T e c h n o l o g y 35
Personal Skills
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes.
(Refer to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, ManitobaEducation and Youth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA9.P4.2 Identifyimmediate hazards and theirimpact on self, others, and theenvironment.
IA9.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA10.P4.1 Recognizeand follow personal andenvironmental health andsafety procedures.
IA10.P4.2 Identifyimmediate and potentialhazards and their impacton self, others, and theenvironment.
IA10.P4.3 Identify andfollow appropriateemergency responseprocedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA11.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment.
IA11.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
IA12.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment, and recommendsafe procedures.
IA12.P4.3 Identify andfollow appropriate emergencyresponse procedures.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s36
Personal Skills
General Learning OutcomeGLO P5 Positive Attitude: Demonstrate positive attitudes to learning in Industrial Arts facilities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P5.1 Listen, in orderto understand and learn.
IA9.P5.2 Demonstrate awillingness to continuouslylearn.
IA9.P5.3 Activelyparticipate in a positive manner.
IA10.P5.1 Listen andrespond, in order to understandand learn.
IA10.P5.2 Assess personallearning needs (i.e., personallearning style).
IA10.P5.3 Activelyparticipate in a positive manner.
IA11.P5.1 Listen andrespond, in order tounderstand, learn, and teach.
IA11.P5.2 Identify learningsources and opportunities.
IA11.P5.3 Activelyparticipate in a positive manner.
IA12.P5.1 Listen andrespond, in order tounderstand, learn, teach, andevaluate.
IA12.P5.2 Set learninggoals and develop a personallearning plan.
IA12.P5.3 Activelyparticipate in a positive manner.
D r a f t i n g D e s i g n T e c h n o l o g y 37
Personal Skills
General Learning OutcomeGLO P6 Teamwork: Adapt strategies to work effectively, independently, or as a team member to complete a project.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P6.1 Demonstrate anunderstanding of the role ofmembers of a team.
IA9.P6.2 Acknowledge theopinions and contributions of allteam members.
IA9.P6.3 List and defineteam objectives.
IA10.P6.1 Contribute to ateam to achieve its mandate.
IA10.P6.2 Respect theopinions and contributions of allteam members.
IA10.P6.3 Contribute to thedevelopment of team objectivesand goals.
IA11.P6.1 Identify the needto lead and/or support in ateam situation, in order toachieve the team mandate.
IA11.P6.2 Seek andappreciate the opinions andcontributions of all teammembers.
IA11.P6.3 �
IA12.P6.1 Understand andwork with others on a “job” toachieve the best results.
IA12.P6.2 Lead and/orsupport as appropriate tomotivate a team for highperformance.
IA12.P6.3 Develop and/orrefine a team approach basedon needs and benefits.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s38
Production Skills
General Learning OutcomeGLO DD1 Tools and Equipment: Identify and demonstrate proper use of tools, materials, and equipment utilized in
drafting design.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD1.1 Identify andutilize traditional “board” toolsused in drafting such as T-squares, drafting machines,set-squares, scales, rules...
IA9.DD1.2 Use a ComputerAssisted Drafting and Design(CADD) system to produce asimple technical drawing.
IA9.DD1.3 Demonstrate aworking knowledge of variousinput and output devices in aCADD system.
IA10.DD1.1 �
IA10.DD1.2 �
IA10.DD1.3 �
IA11.DD1.1 �
IA11.DD1.2 �
IA11.DD1.3 �
IA12.DD1.1 �
IA12.DD1.2 Convert ideasinto 2-D and 3-D drawingsusing a CADD system andrendering software.
IA12.DD1.3 Determinehardware and softwareconfiguration required toaccomplish goals in a specifieddrafting project.
D r a f t i n g D e s i g n T e c h n o l o g y 39
Production Skills
General Learning OutcomeGLO DD2 Drawing Interpretation: Recognize and interpret technical drawings.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD2.1 Do a “materialtake off” from a set of technicaldrawings.
IA9.DD2.2 Identify the mainconventions related to simpletechnical drawings.
IA10.DD2.1 Read and utilizeinformation schedules andnotations (including title blocks)on technical drawings.
IA10.DD2.2 �
IA11.DD2.1 �
IA11.DD2.2 �
IA12.DD2.1 �
IA12.DD2.2 Identify the mainconventions related to severaltypes of technical drawingssuch as product manufacturing,architectural, civil/structuralengineering, aeronauticalengineering…
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s40
Production Skills
General Learning OutcomeGLO DD3 Technical Sketching: Employ technical sketching as a way of visualizing ideas.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD3.1 Identifyspecialized technical sketchingmaterials.
IA9.DD3.2 Sketchorthographic and pictorial viewsof common objects.
IA10.DD3.1 �
IA10.DD3.2 �
IA11.DD3.1 �
IA11.DD3.2 �
IA12.DD3.1 �
IA12.DD3.2 Employsketching as a way ofrepresenting ideas during theplanning of all drafting projects.
D r a f t i n g D e s i g n T e c h n o l o g y 41
Production Skills
General Learning OutcomeGLO DD4 Geometric Application: Apply mathematics and geometry in completing technical drawings.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD4.1 Identify basicgeometric shapes and solids.
IA9.DD4.2 Recognize andinterpret technical drawingscontaining auxiliary views andsections.
IA9.DD4.3 Identify basicgeometric developments.
IA10.DD4.1 Construct basicgeometric shapes and solids.
IA10.DD4.2 �
IA10.DD4.3 �
IA11.DD4.1 �
IA11.DD4.2 �
IA11.DD4.3 �
IA12.DD4.1 �
IA12.DD4.2 Identify theappropriate need for auxiliaryviews and sections in atechnical drawing and createthem.
IA12.DD4.3 Create parallelline and radial linedevelopments with and withoutintersecting shapes.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s42
Production Skills
General Learning OutcomeGLO DD5 Production (Working) Drawings: Use the design process and problem solving to create production
drawings.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD5.1 Identify thecommon terms and propertiesof typical mechanicalproduction drawings such astolerances, surface finish,threaded fastenerspecifications, welding symbols
IA9.DD5.2 Identify thecommon terms and propertiesof typical building constructiondrawings such as presentationdrawings, constructiondrawings, plan views,elevations, finish schedules,perspective projection …
IA9.DD5.3 Identify thecommon terms and propertiesof typical electricity/electronicsand piping fluidic drawings suchas schematic symbols, pictorialconnection diagrams, single linepipe diagrams …
IA10.DD5.1 �
IA10.DD5.2 �
IA10.DD5.3 �
IA11.DD5.1 �
IA11.DD5.2 �
IA11.DD5.3 �
IA12.DD5.1 Research,assemble information, anddevelop a solution by creating amechanical production drawing.
IA12.DD5.2 Research,assemble information, anddevelop a solution by creating abuilding construction drawing.
IA12.DD5.3 Research,assemble information, anddevelop a solution by creating aelectricity/electronics drawing.
Continued
D r a f t i n g D e s i g n T e c h n o l o g y 43
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD5.4 Identify thecommon terms andproperties of typicaltechnical illustration/salesdrawings such as shading,exploded pictorial, washrendering, charting …
IA9.DD5.5 Identify thecommon terms andproperties of typicalgeological/ topographicaldrawings such as cadastralmaps, plot survey, contourmapping …
IA10.DD5.4 �
IA10.DD5.5 �
IA11.DD5.4 �
IA11.DD5.5 �
IA12.DD5.4 Research,assemble information, anddevelop a solution bycreating a technicalillustration/sales drawing.
IA12.DD5.5 Research,assemble information, anddevelop a solution bycreating a geological/topographical drawing.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s44
Production Skills
General Learning OutcomeGLO DD6 Applications: Develop an understanding of drafting applications and current workplace practice.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD6.1 Identify thecommon terms and practicesassociated with productmanufacturing drafting such asdetail working drawings,assembly drawings, scalemodels, and prototypes …
IA9.DD6.2 Identify thecommon terms and practicesassociated with architecturaldrafting such as architecturallettering, architectural styles,house construction,architectural scale models …
IA9.DD6.3 Identify thecommon terms and practicesassociated with engineeringdrafting such as communityplans, surveys, steel structurecross sections, sheet metal,jigs, fixtures …
IA10.DD6.1 �
IA10.DD6.2 �
IA10.DD6.3 �
IA11.DD6.1 �
IA11.DD6.2 �
IA11.DD6.3 �
IA12.DD6.1 Combineknowledge of productiondrawings, good design process,and teamwork to create aseries of drawings and modelsas a solution to a productmanufacturing challenge.
IA12.DD6.2 Combineknowledge of productiondrawings, good design process,and teamwork to create aseries of drawings as a solutionto an architectural projectchallenge.
IA12.DD6.3 Combineknowledge of productiondrawings, good design process,and teamwork to create aseries of drawings as a solutionto an engineering projectchallenge.
D r a f t i n g D e s i g n T e c h n o l o g y 45
Production Skills
General Learning OutcomeGLO DD7 Current Innovation: Demonstrate an understanding of current innovation in drafting design processes,
applications, and emerging new technologies.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.DD7.1 Identify severalcurrent innovations in draftingdesign such as virtualwalkthrough software, 3-Dprototype printing, 3-D solidmodelling drafting …
IA10.DD7.1 � IA11.DD7.1 � IA12.DD7.1 Research,explain, and demonstrateseveral current innovations indrafting design.
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 49
Fundamental Skills
General Learning OutcomeGLO F1 Technical Communication: Communicate technical ideas and designs effectively and appropriately
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F1.1 Use severalpresentation programs usingexisting formats to digitallycommunicate a technical idea.
IA9.F1.2 Interpret agraphic presentation of atechnical idea.
IA9.F1.3 Recognizetechnical language and terms.
IA9.F1.4 Effectively usetechnical reading skills to followa set of instructional steps.
IA10.F1.1 Design a simplepresentation using apresentation program tocommunicate a technical idea.
IA10.F1.2 Adapt a graphicpresentation of a technicalidea.
IA10.F1.3 Use technicallanguage and terms in thecorrect context.
IA10.F1.4 Adapt a set ofinstructional steps usingappropriate technical writingskills.
IA11.F1.1 Apply anadvanced presentation programeffectively to communicate atechnical idea visually.
IA11.F1.2 Create a graphicpresentation of a technicalidea.
IA11.F1.3 Create a set ofsteps using correct technicalwriting techniques to effectivelydescribe a technical process.
IA12.F1.1 Apply anappropriate combination ofdigital, graphic, oral, andwritten techniques to effectivelycommunicate a technical idea.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s50
Fundamental Skills
General Learning OutcomeGLO F2 Problem Solving: Apply effective decision-making, problem-solving, and design strategies to a project.
(Refer to Appendix B for a sample design/problem-solving process.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F2.1 Demonstrate anunderstanding of the problem-solving process in designingand producing a product.
IA9.F2.2 Identify criteriafor making and evaluatingchoices.
IA9.F2.3 Demonstrate anunderstanding of the qualitiesof good design.
IA10.F2.1 Identifyproblems and apply appropriateproblem-solving skills to solvethem.
IA10.F2.2 Apply a decision-making strategy to practicalsituations.
IA10.F2.3 Modify anexisting design to meetspecified criteria.
IA11.F2.1 Transferproblem-solving skills to real-life situations.
IA11.F2.2 Use a variety ofcritical thinking skills toevaluate situations and makedecisions.
IA11.F2.3 Create a designto meet a set of specifications.
IA12.F2.1 Research andarticulate a problem that canbe solved through technologicalmeans.
IA12.F2.2 Apply problem-solving and design skills todevelop a technological solutionto a problem.
IA12.F2.3 Analyze criticallyand act logically to evaluatesituations and make decisions.
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 51
Fundamental Skills
General Learning OutcomeGLO F3 Information Management: Effectively manage information.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F3.1 Acquire andorganize information usingappropriate technology andinformation systems.
IA9.F3.2 Demonstrate theappropriate use of informationas directed.
IA10.F3.1 Apply specializedinformation and skills in real-lifesituations.
IA10.F3.2 Access and use arange of relevant information,material, and human resourceswith limited direction.
IA11.F3.1 Transfer andapply specialized informationand skills in a variety ofsituations.
IA11.F3.2 Acquire and usea range of relevant information,material, and human resources,and recognize when additionalresources are required.
IA12.F3.1 Acquire, analyze,and apply specializedinformation and skills fromvarious disciplines in a varietyof realistic circumstances.
IA12.F3.2 Support andenhance basic informationrequirements by using a widevariety of information, material,and human resources.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s52
Personal Skills
General Learning OutcomeGLO P1 Time Management: Demonstrate responsibility in time management, task completion, and in meeting
project criteria. (Note: based on the Conference Board of Canada’s Personal Management Skills)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P1.1 Demonstrateresponsibility in timemanagement.
IA9.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA9.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA9.P1.4 Complete allassigned tasks within stateddeadlines.
IA9.P1.5 Complete allprojects according to specifiedcriteria.
IA10.P1.1 Demonstrateresponsibility in timemanagement.
IA10.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA10.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA10.P1.4 Complete allassigned tasks within stateddeadlines.
IA10.P1.5 Complete allprojects according to specifiedcriteria.
IA11.P1.1 Demonstrateresponsibility in timemanagement.
IA11.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA11.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA11.P1.4 Complete allassigned tasks within stateddeadlines.
IA11.P1.5 Complete allprojects according to specifiedcriteria.
IA12.P1.1 Demonstrateresponsibility in timemanagement.
IA12.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA12.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA12.P1.4 Complete allassigned tasks within stateddeadlines.
IA12.P1.5 Complete allprojects according to specifiedcriteria.
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 53
Personal Skills
General Learning OutcomeGLO P2 Ethical Decision Making: Make ethical decisions concerning the impact of one’s activities and the use of
technology.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P2.1 Make personaljudgments whether certainbehaviours/actions are right orwrong.
IA9.P2.2 Demonstrate anunderstanding of technologicalimpact on the environment,society, lifestyles, etc.
IA10.P2.1 Assess howpersonal judgments affect peermembers and/or communitymembers.
IA10.P2.2 Demonstrate anunderstanding of the impact oftechnological choices.
IA11.P2.1 Assess theimplications of personal/groupactions within the broadercommunity.
IA11.P2.2 Develop andimplement risk managementstrategies for a variety oftechnological activities.
IA12.P2.1 Analyze theimplications of personal/groupactions within the globalcontext.
IA12.P2.2 State andsupport a personal code ofethics as required.
IA12.P2.3 Demonstrateresponsible leadership inmanaging current and futuretechnologies on theenvironment and on society.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s54
Personal Skills
General Learning OutcomeGLO P3 Career Planning: Develop an action plan relating personal aptitudes and abilities to occupational
opportunities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P3.1 Identify criticalskills needed for employabilityin today's workplace.
IA9.P3.2 Demonstrate anawareness of the technologiesof specific occupations andworkplaces.
IA10.P3.1 Evaluateemployability profiles for avariety of workplaces andcareers.
IA10.P3.2 Outline skillsrequired for a specific careerpath.
IA11.P3.1 Developstrategies to assess personaltechnological literacy andcapability.
IA11.P3.2 Perform anassessment of personalstrengths and weaknesses(career portfolio).
IA12.P3.1 Assess specificpersonal skills, interests, andabilities (career portfolio).
IA12.P3.2 Develop a planfor acquiring the technologicalcapabilities required to achievea career vision (careerportfolio).
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 55
Personal Skills
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes. (Refer
to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, Manitoba Education andYouth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA9.P4.2 Identifyimmediate hazards and theirimpact on self, others, and theenvironment.
IA9.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA10.P4.1 Recognize andfollow personal andenvironmental health andsafety procedures.
IA10.P4.2 Identifyimmediate and potentialhazards and their impact onself, others, and theenvironment.
IA10.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA11.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment.
IA11.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
IA12.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment, and recommendsafe procedures.
IA12.P4.3 Identify andfollow appropriate emergencyresponse procedures.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s56
Personal Skills
General Learning OutcomeGLO P5 Positive Attitude: Demonstrate positive attitudes to learning in Industrial Arts facilities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P5.1 Listen, in orderto understand and learn.
IA9.P5.2 Demonstrate awillingness to continuouslylearn.
IA9.P5.3 Activelyparticipate in a positive manner.
IA10.P5.1 Listen andrespond, in order to understandand learn.
IA10.P5.2 Assess personallearning needs (i.e., personallearning style).
IA10.P5.3 Activelyparticipate in a positive manner.
IA11.P5.1 Listen andrespond, in order tounderstand, learn and teach.
IA11.P5.2 Identify learningsources and opportunities.
IA11.P5.3 Activelyparticipate in a positive manner.
IA12.P5.1 Listen andrespond, in order tounderstand, learn, teach, andevaluate.
IA12.P5.2 Set learninggoals and develop a personallearning plan.
IA12.P5.3 Activelyparticipate in a positive manner.
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 57
Personal Skills
General Learning OutcomeGLO P6 Teamwork: Adapt strategies to work effectively, independently, or as a team member to complete a project.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P6.1 Demonstrate anunderstanding of the role ofmembers of a team.
IA9.P6.2 Acknowledge theopinions and contributions of allteam members.
IA9.P6.3 List and defineteam objectives.
IA10.P6.1 Contribute to ateam to achieve its mandate.
IA10.P6.2 Respect theopinions and contributions of allteam members.
IA10.P6.3 Contribute to thedevelopment of team objectivesand goals.
IA11.P6.1 Identify the needto lead and/or support in ateam situation, in order toachieve the team mandate.
IA11.P6.2 Seek andappreciate the opinions andcontributions of all teammembers.
IA11.P6.3 �
IA12.P6.1 Understand andwork with others on a “job” toachieve the best results.
IA12.P6.2 Lead and/orsupport as appropriate tomotivate a team for highperformance.
IA12.P6.3 Develop and/orrefine a team approach basedon needs and benefits.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s58
Production Skills
General Learning OutcomeGLO EE1 Tools and Equipment: Identify and demonstrate proper use of tools, materials, and equipment utilized in
electricity/electronics.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE1.1 Identify andutilize common hand tools usedin electricity/electronics.
IA9.EE1.2 Identify andutilize several common piecesof test equipment used inelectricity/electronics such asohmmeters, ammeters,voltmeters, power supplies...
IA9.EE1.3 Selectappropriate test equipment tomeasure specified functions ofan electricity/electronics circuit.
IA10.EE1.1 �
IA10.EE1.2 �
IA10.EE1.3 �
IA11.EE1.1 �
IA11.EE1.2 �
IA11.EE1.3 �
IA12.EE1.1 �
IA12.EE1.2 Identify andutilize most common pieces oftest equipment used inelectricity/electronics includingseveral specialized pieces oftest equipment such asprogrammable power supplies,function/pulse/signalgenerators, componentmeasuring devices, frequencycounters, spectrum analyzers,logic analyzers….
IA12.EE1.3 Applyappropriate test equipmenttechniques to the analysis,repair, and calibration ofelectricity/electronics circuitsand devices.
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 59
Production Skills
General Learning OutcomeGLO EE2 Circuit Construction: Apply appropriate fabrication techniques to construct electricity/electronics devices.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE2.1 Use correctprocedures to solder basicelectricity/electronics circuitry.
IA9.EE2.2 Breadboardsimple circuits from givenschematic diagrams.
IA9.EE2.3 Construct simpleprinted circuits.
IA9.EE2.4 Troubleshoot andrepair simple electricity/electronics circuitry.
IA10.EE2.1 �
IA10.EE2.2 �
IA10.EE2.3 �
IA10.EE2.4 �
IA11.EE2.1 �
IA11.EE2.2 �
IA11.EE2.3 �
IA11.EE2.4 �
IA12.EE2.1 Use correctprocedures to solderelectricity/electronics circuitryincluding unique and heatsensitive circuits.
IA12.EE2.2 Breadboardcomplex circuits from givenschematic diagrams.
IA12.EE2.3 Design, plan,and construct complex printedcircuits.
IA12.EE2.4 Troubleshoot andrepair complex electricity/electronics circuitry.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s60
Production Skills
General Learning OutcomeGLO EE3 Components: Demonstrate the function of electricity/electronics passive and active components.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE3.1 Identify commonelectricity/electronics passiveand active components such asresistors, conductors,semiconductors, controldevices...
IA9.EE3.2 Selectappropriate components for acircuit given a schematicdiagram.
IA10.EE3.1 �
IA10.EE3.2 �
IA11.EE3.1 �
IA11.EE3.2 �
IA12.EE3.1 Describe thefunction, properties, andschematic symbols of mostcommon electricity/electronicspassive and active components.
IA12.EE3.2 �
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 61
Production Skills
General Learning OutcomeGLO EE4 Laws and Theory: Apply electricity/electronics laws and theory.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE4.1 Demonstrate anunderstanding of basicelectrical laws and formulassuch as Ohm’s Law, Watt’s Law,the law of magnetism…
IA9.EE4.2 Demonstrate anunderstanding of basic DCelectrical theory includingconcepts such as the atomicmodel, electrons, current,electromotive force, potentialdifference, volt, resistance,inductance…
IA9.EE4.3 Demonstrate anunderstanding of basic ACelectrical theory includingconcepts such as sine wave, ACgeneration, hertz, induction,capacitive reactance…
IA10.EE4.1 �
IA10.EE4.2 �
IA10.EE4.3 �
IA11.EE4.1 �
IA11.EE4.2 �
IA11.EE4.3 �
IA12.EE4.1 Applymathematical calculations andformulas to analyze electricity/electronics circuitry.
IA12.EE4.2 Apply DC theoryto analyze electricity/electronicscircuitry.
IA12.EE4.3 Apply AC theoryto analyze electricity/electronicscircuitry.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s62
Production Skills
General Learning OutcomeGLO EE5 Circuits and Systems: Identify and analyze basic electricity/electronics circuits.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE5.1 Identify basicelectricity/electronics circuitssuch as series, parallel,combination, rectifier, oscillator,amplifier, pulse, logic…
IA9.EE5.2 Identify basiccircuits within electricity/electronics systems such aspower control devices, signalproducing-receiving devices,analog, and digital systems…
IA9.EE5.3 Produceschematic and/or blockdiagrams of electricity/electronics circuits andsystems.
IA10.EE5.1 �
IA10.EE5.2 �
IA10.EE5.3 �
IA11.EE5.1 �
IA11.EE5.2 �
IA11.EE5.3 �
IA12.EE5.1 Design andtroubleshoot basic electricity/electronics circuits.
IA12.EE5.2 Combine basicelectricity/electronics circuitryto produce systems thatachieve specified functions.
IA12.EE5.3 �
E l e c t r i c i t y / E l e c t r o n i c s T e c h n o l o g y 63
Production Skills
General Learning OutcomeGLO EE6 Applications: Develop an understanding of electricity/electronics applications.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE6.1 Identify basiccircuitry and systems used insimple real-world electricity/electronics applications such asalarm systems, residentialwiring, radio, television, digitallogic circuits…
IA9.EE6.2 Troubleshoot andrepair basic electricity/electronics systems andapplications.
IA10.EE6.1 �
IA10.EE6.2 �
IA11.EE6.1 �
IA11.EE6.2 �
IA12.EE6.1 Combineelectricity/electronics circuitsand systems to createelectricity/electronics devicesand applications that performspecific functions.
IA12.EE6.2 �
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s64
Production Skills
General Learning OutcomeGLO EE7 Current Innovation: Demonstrate an understanding of current innovation in electricity/electronics
processes, applications, and emerging new technologies.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.EE7.1 Identify severalcurrent innovations inelectricity/electronics such asComputer Numerical Control,robotics and automation, digitalcommunication, fibre opticnetworks, Nano-technology,circuit simulation software …
IA10.EE7.1 � IA11.EE7.1 � IA12.EE7.1 Research,explain, and demonstrateseveral current innovations inelectricity/electronics.
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 67
Fundamental Skills
General Learning OutcomeGLO F1 Technical Communication: Communicate technical ideas and designs effectively and appropriately.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F1.1 Use severalpresentation programs usingexisting formats to digitallycommunicate a technical idea.
IA9.F1.2 Interpret agraphic presentation of atechnical idea.
IA9.F1.3 Recognizetechnical language and terms.
IA9.F1.4 Effectively usetechnical reading skills to followa set of instructional steps.
IA10.F1.1 Design a simplepresentation using apresentation program tocommunicate a technical idea.
IA10.F1.2 Adapt a graphicpresentation of a technicalidea.
IA10.F1.3 Use technicallanguage and terms in thecorrect context.
IA10.F1.4 Adapt a set ofinstructional steps usingappropriate technical writingskills.
IA11.F1.1 Apply anadvanced presentation programeffectively to communicate atechnical idea visually.
IA11.F1.2 Create a graphicpresentation of a technicalidea.
IA11.F1.3 Create a set ofsteps using correct technicalwriting techniques to effectivelydescribe a technical process.
IA12.F1.1 Apply anappropriate combination ofdigital, graphic, oral, andwritten techniques to effectivelycommunicate a technical idea.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s68
Fundamental Skills
General Learning OutcomeGLO F2: Problem Solving: Apply effective decision-making, problem-solving, and design strategies to a project.
(Refer to Appendix B for a sample design/problem-solving process.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F2.1 Demonstrate anunderstanding of the problem-solving process in designingand producing a product.
IA9.F2.2 Identify criteriafor making and evaluatingchoices.
IA9.F2.3 Demonstrate anunderstanding of the qualitiesof good design.
IA10.F2.1 Identifyproblems and apply appropriateproblem-solving skills to solvethem.
IA10.F2.2 Apply a decision-making strategy to practicalsituations.
IA10.F2.3 Modify anexisting design to meetspecified criteria.
IA11.F2.1 Transferproblem-solving skills to real-life situations.
IA11.F2.2 Use a variety ofcritical thinking skills toevaluate situations and makedecisions.
IA11.F2.3 Create a designto meet a set of specifications.
IA12.F2.1 Research andarticulate a problem that canbe solved through technologicalmeans.
IA12.F2.2 Apply problem-solving and design skills todevelop a technological solutionto a problem.
IA12.F2.3 Analyze criticallyand act logically to evaluatesituations and make decisions.
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 69
Fundamental Skills
General Learning OutcomeGLO F3 Information Management: Effectively manage information.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F3.1 Acquire andorganize information usingappropriate technology andinformation systems.
IA9.F3.2 Demonstrate theappropriate use of informationas directed.
IA10.F3.1 Apply specializedinformation and skills in real-lifesituations.
IA10.F3.2 Access and use arange of relevant information,material, and human resourceswith limited direction.
IA11.F3.1 Transfer andapply specialized informationand skills in a variety ofsituations.
IA11.F3.2 Acquire and usea range of relevant information,material, and human resources,and recognize when additionalresources are required.
IA12.F3.1 Acquire, analyze,and apply specializedinformation and skills fromvarious disciplines in a varietyof realistic circumstances.
IA12.F3.2 Support andenhance basic informationrequirements by using a widevariety of information, material,and human resources.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s70
Personal Skills
General Learning OutcomeGLO P1 Time Management: Demonstrate responsibility in time management, task completion, and in meeting
project criteria. (Note: based on the Conference Board of Canada’s Personal Management Skills)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P1.1 Demonstrateresponsibility in timemanagement.
IA9.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA9.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA9.P1.4 Complete allassigned tasks within stateddeadlines.
IA9.P1.5 Complete allprojects according to specifiedcriteria.
IA10.P1.1 Demonstrateresponsibility in timemanagement.
IA10.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA10.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA10.P1.4 Complete allassigned tasks within stateddeadlines.
IA10.P1.5 Complete allprojects according to specifiedcriteria.
IA11.P1.1 Demonstrateresponsibility in timemanagement.
IA11.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA11.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA11.P1.4 Complete allassigned tasks within stateddeadlines.
IA11.P1.5 Complete allprojects according to specifiedcriteria.
IA12.P1.1 Demonstrateresponsibility in timemanagement.
IA12.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA12.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA12.P1.4 Complete allassigned tasks within stateddeadlines.
IA12.P1.5 Complete allprojects according to specifiedcriteria.
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 71
Personal Skills
General Learning OutcomeGLO P2 Ethical Decision Making: Make ethical decisions concerning the impact of one’s activities and the use of
technology.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P2.1 Make personaljudgments whether certainbehaviours/actions are right orwrong.
IA9.P2.2 Demonstrate anunderstanding of technologicalimpact on the environment,society, lifestyles, etc.
IA10.P2.1 Assess howpersonal judgments affect peermembers and/or communitymembers.
IA10.P2.2 Demonstrate anunderstanding of the impact oftechnological choices.
IA11.P2.1 Assess theimplications of personal/groupactions within the broadercommunity.
IA11.P2.2 Develop andimplement risk managementstrategies for a variety oftechnological activities.
IA12.P2.1 Analyze theimplications of personal/groupactions within the globalcontext.
IA12.P2.2 State andsupport a personal code ofethics as required.
IA12.P2.3 Demonstrateresponsible leadership inmanaging current and futuretechnologies on theenvironment and on society.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s72
Personal Skills
General Learning OutcomeGLO P3 Career Planning: Develop an action plan relating personal aptitudes and abilities to occupational
opportunities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P3.1 Identify criticalskills needed for employabilityin today's workplace.
IA9.P3.2 Demonstrate anawareness of the technologiesof specific occupations andworkplaces.
IA10.P3.1 Evaluateemployability profiles for avariety of workplaces andcareers.
IA10.P3.2 Outline skillsrequired for a specific careerpath.
IA11.P3.1 Developstrategies to assess personaltechnological literacy andcapability.
IA11.P3.2 Perform anassessment of personalstrengths and weaknesses(career portfolio).
IA12.P3.1 Assess specificpersonal skills, interests, andabilities (career portfolio).
IA12.P3.2 Develop a planfor acquiring the technologicalcapabilities required to achievea career vision (careerportfolio).
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 73
Personal Skills
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes. (Refer
to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, Manitoba Education andYouth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA9.P4.2 Identifyimmediate hazards and theirimpact on self, others, and theenvironment.
IA9.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA10.P4.1 Recognize andfollow personal andenvironmental health andsafety procedures.
IA10.P4.2 Identifyimmediate and potentialhazards and their impact onself, others, and theenvironment.
IA10.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA11.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment.
IA11.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
IA12.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment, and recommendsafe procedures.
IA12.P4.3 Identify andfollow appropriate emergencyresponse procedures.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s74
Personal Skills
General Learning OutcomeGLO P5 Positive Attitude: Demonstrate positive attitudes to learning in Industrial Arts facilities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P5.1 Listen, in orderto understand and learn.
IA9.P5.2 Demonstrate awillingness to continuouslylearn.
IA9.P5.3 Activelyparticipate in a positive manner.
IA10.P5.1 Listen andrespond, in order to understandand learn.
IA10.P5.2 Assess personallearning needs (i.e., personallearning style).
IA10.P5.3 Activelyparticipate in a positive manner.
IA11.P5.1 Listen andrespond, in order tounderstand, learn and teach.
IA11.P5.2 Identify learningsources and opportunities.
IA11.P5.3 Activelyparticipate in a positive manner.
IA12.P5.1 Listen andrespond, in order tounderstand, learn, teach, andevaluate.
IA12.P5.2 Set learninggoals and develop a personallearning plan.
IA12.P5.3 Activelyparticipate in a positive manner.
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 75
Personal Skills
General Learning OutcomeGLO P6 Teamwork: Adapt strategies to work effectively, independently, or as a team member to complete a project.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P6.1 Demonstrate anunderstanding of the role ofmembers of a team.
IA9.P6.2 Acknowledge theopinions and contributions of allteam members.
IA9.P6.3 List and defineteam objectives.
IA10.P6.1 Contribute to ateam to achieve its mandate.
IA10.P6.2 Respect theopinions and contributions of allteam members.
IA10.P6.3 Contribute to thedevelopment of team objectivesand goals.
IA11.P6.1 Identify the needto lead and/or support in ateam situation, in order toachieve the team mandate.
IA11.P6.2 Seek andappreciate the opinions andcontributions of all teammembers.
IA11.P6.3 �
IA12.P6.1 Understand andwork with others on a “job” toachieve the best results.
IA12.P6.2 Lead and/orsupport as appropriate tomotivate a team for highperformance.
IA12.P6.3 Develop and/orrefine a team approach basedon needs and benefits.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s76
Production Skills
General Learning OutcomeGLO GC1 Image Acquisition: Demonstrate the principals and processes involved with image acquisition and
creation.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.GC1.1 Identify severalmethods of acquiring andcreating images such asscanning, digital photography,using clip art …
IA9.GC1.2 Create rastergraphic images.
IA9.GC1.3 Create vectorgraphic images.
IA10.GC1.1 �
IA10.GC1.2 �
IA10.GC1.3 �
IA11.GC1.1 �
IA11.GC1.2 �
IA11.GC1.3 �
IA12.GC1.1 Acquire andmodify images usingappropriate methods.
IA12.GC1.2 �
IA12.GC1.3 �
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 77
Production Skills
General Learning OutcomeGLO GC2 Still Image Production: Apply knowledge and practical skills to produce still image visual representations
of ideas or abstract concepts.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.GC2.1 Identify theprocedures required forproducing a visualrepresentation by reliefprinting.
IA9.GC2.2 Identify theprocedures required forproducing a visualrepresentation by screenprinting.
IA9.GC2.3 Identify theprocedures required forproducing a visualrepresentation by lithography.
IA9.GC2.4 Identify theprocedures required forproducing a visualrepresentation by continuoustone and process photography.
IA9.GC2.5 Identify theprocedures required forproducing a visualrepresentation by electronicmedia.
IA10.GC2.1 �
IA10.GC2.2 �
IA10.GC2.3 �
IA10.GC2.4 �
IA10.GC2.5 �
IA11.GC2.1 �
IA11.GC2.2 �
IA11.GC2.3 �
IA11.GC2.4 �
IA11.GC2.5 �
IA12.GC2.1 Use severaltypes of relief printingappropriately to create visualrepresentations.
IA12.GC2.2 Use severaltypes of screen printingappropriately to create visualrepresentations.
IA12.GC2.3 Use severaltypes of lithographyappropriately to create visualrepresentations.
IA12.GC2.4 Use severaltypes of continuous andprocess photographyappropriately to create visualrepresentations.
IA12.GC2.5 Use severaltypes of relief printingappropriately to create visualrepresentations.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s78
Production Skills
General Learning OutcomeGLO GC3 Binding and Packaging: Demonstrate and apply the knowledge and skills to finish a product for
distribution.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.GC3.1 Identify severalmethods of binding such asstapling, gum binding, coilbinding, stitching...
IA9.GC3.2 Identify severalpackaging methods andsystems such as applyingcovers, folding, collating …
IA10.GC3.1 �
IA10.GC3.2 �
IA11.GC3.1 �
IA11.GC3.2 �
IA12.GC3.1 Bind a printedrun using an appropriatemethod to fulfill a specific set ofrequirements.
IA12.GC3.2 Determine andapply appropriate packaging tofulfill a specific set of documentrequirements..
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 79
Production Skills
General Learning OutcomeGLO GC4 Animated Images: Apply knowledge and skills to produce animated images of ideas or abstract concepts.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.GC4.1 Demonstrate anunderstanding of and use basicanimation terms such asstoryboarding, cels, fielding,hand inking, frame rate,embed, tweening …
IA9.GC4.2 Identify andexplain several 2-D methods ofanimation such as hand-drawncels, cut-out animation,computer-drawn frames …
IA9.GC4.3 Identify andexplain several 3-D methods ofanimation such as claymation,stop action, live, digitalanimation, 3-D computeranimation …
IA10.GC4.1 �
IA10.GC4.2 �
IA10.GC4.3 �
IA11.GC4.1 �
IA11.GC4.2 �
IA11.GC4.3 �
IA12.GC4.1 �
IA12.GC4.2 Create a 2-Danimation using an appropriatemethod to fulfill a specific set ofrequirements.
IA12.GC4.3 Create a 3-Danimation using an appropriatemethod to fulfill a specific set ofrequirements.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s80
Production Skills
General Learning OutcomeGLO GC5 Video Editing: Create and edit video productions.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.GC5.1 Demonstrate anunderstanding of and use basicvideo production terms such asstoryboarding, scripting,continuity, non-linear editing,NTSC, PAL …
IA9.GC5.2 Identify thesteps and requirements ofvideo pre-production such asstoryboarding, scripting, setpreparation …
IA9.GC5.3 Identify thesteps and requirements ofvideo production such ascamera operation, lighting,sound, continuity, productionmanagement …
IA9.GC5.4 Identify thesteps and requirements ofvideo editing such as log andcapturing, timelines, clips,transitions, effects, titles …
IA10.GC5.1 �
IA10.GC5.2 �
IA10.GC5.3 �
IA10.GC5.4 �
IA11.GC5.1 �
IA11.GC5.2 �
IA11.GC5.3 �
IA11.GC5.4 �
IA12.GC5.2 �
IA12.GC5.3 Combineproduction knowledge, gooddesign process, and teamworkto complete the pre-productionwork for a video project.
IA12.GC5.4 Combineproduction knowledge, gooddesign process, and teamworkto complete the productionwork for a video project.
IA12.GC5.5 Combineproduction knowledge, gooddesign process, and teamworkto complete the post-production work for a videoproject.
G r a p h i c C o m m u n i c a t i o n T e c h n o l o g y 81
Production Skills
General Learning OutcomeGLO GC6 Current Innovation: Demonstrate an understanding of current innovation in graphic communication
processes, applications, and emerging new technologies.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.GC6.1 Identify severalcurrent innovations in graphiccommunication such as wide-format printing, interactivegraphics, 3-D animation multi-camera motion capture …
IA10.GC6.1 � IA11.GC6.1 � IA12.GC6.1 Research,explain, and demonstrateseveral current innovations ingraphic communication.
M e t a l w o r k T e c h n o l o g y 85
Fundamental Skills
General Learning OutcomeGLO F1 Technical Communication: Communicate technical ideas and designs effectively and appropriately.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F1.1 Use severalpresentation programs usingexisting formats to digitallycommunicate a technical idea.
IA9.F1.2 Interpret agraphic presentation of atechnical idea.
IA9.F1.3 Recognizetechnical language and terms.
IA9.F1.4 Effectively usetechnical reading skills to followa set of instructional steps.
IA10.F1.1 Design a simplepresentation using apresentation program tocommunicate a technical idea.
IA10.F1.2 Adapt a graphicpresentation of a technicalidea.
IA10.F1.3 Use technicallanguage and terms in thecorrect context.
IA10.F1.4 Adapt a set ofinstructional steps usingappropriate technical writingskills.
IA11.F1.1 Apply anadvanced presentation programeffectively to communicate atechnical idea visually.
IA11.F1.2 Create a graphicpresentation of a technicalidea.
IA11.F1.3 Create a set ofsteps using correct technicalwriting techniques to effectivelydescribe a technical process.
IA12.F1.1 Apply anappropriate combination ofdigital, graphic, oral, andwritten techniques to effectivelycommunicate a technical idea.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s86
Fundamental Skills
General Learning OutcomeGLO F2 Problem Solving: Apply effective decision-making, problem-solving, and design strategies to a project.
(Refer to Appendix B for a sample design/problem-solving process.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F2.1 Demonstrate anunderstanding of the problem-solving process in designingand producing a product.
IA9.F2.2 Identify criteriafor making and evaluatingchoices.
IA9.F2.3 Demonstrate anunderstanding of the qualitiesof good design.
IA10.F2.1 Identifyproblems and apply appropriateproblem-solving skills to solvethem.
IA10.F2.2 Apply a decision-making strategy to practicalsituations.
IA10.F2.3 Modify anexisting design to meetspecified criteria.
IA11.F2.1 Transferproblem-solving skills to real-life situations.
IA11.F2.2 Use a variety ofcritical thinking skills toevaluate situations and makedecisions.
IA11.F2.3 Create a designto meet a set of specifications.
IA12.F2.1 Research andarticulate a problem that canbe solved through technologicalmeans.
IA12.F2.2 Apply problem-solving and design skills todevelop a technological solutionto a problem.
IA12.F2.3 Analyze criticallyand act logically to evaluatesituations and make decisions.
M e t a l w o r k T e c h n o l o g y 87
Fundamental Skills
General Learning OutcomeGLO F3 Information Management: Effectively manage information.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F3.1 Acquire andorganize information usingappropriate technology andinformation systems.
IA9.F3.2 Demonstrate theappropriate use of informationas directed.
IA10.F3.1 Apply specializedinformation and skills in real-lifesituations.
IA10.F3.2 Access and use arange of relevant information,material, and human resourceswith limited direction.
IA11.F3.1 Transfer andapply specialized informationand skills in a variety ofsituations.
IA11.F3.2 Acquire and usea range of relevant information,material, and human resources,and recognize when additionalresources are required.
IA12.F3.1 Acquire, analyze,and apply specializedinformation and skills fromvarious disciplines in a varietyof realistic circumstances.
IA12.F3.2 Support andenhance basic informationrequirements by using a widevariety of information, material,and human resources.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s88
Personal Skills
General Learning OutcomeGLO P1 Time Management: Demonstrate responsibility in time management, task completion, and in meeting
project criteria. (Note: based on the Conference Board of Canada’s Personal Management Skills)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P1.1 Demonstrateresponsibility in timemanagement.
IA9.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA9.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA9.P1.4 Complete allassigned tasks within stateddeadlines.
IA9.P1.5 Complete allprojects according to specifiedcriteria.
IA10.P1.1 Demonstrateresponsibility in timemanagement.
IA10.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA10.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA10.P1.4 Complete allassigned tasks within stateddeadlines.
IA10.P1.5 Complete allprojects according to specifiedcriteria.
IA11.P1.1 Demonstrateresponsibility in timemanagement.
IA11.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA11.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA11.P1.4 Complete allassigned tasks within stateddeadlines.
IA11.P1.5 Complete allprojects according to specifiedcriteria.
IA12.P1.1 Demonstrateresponsibility in timemanagement.
IA12.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA12.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA12.P1.4 Complete allassigned tasks within stateddeadlines.
IA12.P1.5 Complete allprojects according to specifiedcriteria.
M e t a l w o r k T e c h n o l o g y 89
Personal Skills
General Learning OutcomeGLO P2 Ethical Decision Making: Make ethical decisions concerning the impact of one’s activities and the use of
technology.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P2.1 Make personaljudgments whether certainbehaviours/actions are right orwrong.
IA9.P2.2 Demonstrate anunderstanding of technologicalimpact on the environment,society, lifestyles, etc.
IA10.P2.1 Assess howpersonal judgments affect peermembers and/or communitymembers.
IA10.P2.2 Demonstrate anunderstanding of the impact oftechnological choices.
IA11.P2.1 Assess theimplications of personal/groupactions within the broadercommunity.
IA11.P2.2 Develop andimplement risk managementstrategies for a variety oftechnological activities.
IA12.P2.1 Analyze theimplications of personal/groupactions within the globalcontext.
IA12.P2.2 State andsupport a personal code ofethics as required.
IA12.P2.3 Demonstrateresponsible leadership inmanaging current and futuretechnologies on theenvironment and on society.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s90
Personal Skills
General Learning OutcomeGLO P3 Career Planning: Develop an action plan relating personal aptitudes and abilities to occupational
opportunities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P3.1 Identify criticalskills needed for employabilityin today's workplace.
IA9.P3.2 Demonstrate anawareness of the technologiesof specific occupations andworkplaces.
IA10.P3.1 Evaluateemployability profiles for avariety of workplaces andcareers.
IA10.P3.2 Outline skillsrequired for a specific careerpath.
IA11.P3.1 Developstrategies to assess personaltechnological literacy andcapability.
IA11.P3.2 Perform anassessment of personalstrengths and weaknesses(career portfolio).
IA12.P3.1 Assess specificpersonal skills, interests, andabilities (career portfolio).
IA12.P3.2 Develop a planfor acquiring the technologicalcapabilities required to achievea career vision (careerportfolio).
M e t a l w o r k T e c h n o l o g y 91
Personal Skills
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes. (Refer
to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, Manitoba Education andYouth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA9.P4.2 Identifyimmediate hazards and theirimpact on self, others, and theenvironment.
IA9.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA10.P4.1 Recognize andfollow personal andenvironmental health andsafety procedures.
IA10.P4.2 Identifyimmediate and potentialhazards and their impact onself, others, and theenvironment.
IA10.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA11.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment.
IA11.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
IA12.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment, and recommendsafe procedures.
IA12.P4.3 Identify andfollow appropriate emergencyresponse procedures.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s92
Personal Skills
General Learning OutcomeGLO P5 Positive Attitude: Demonstrate positive attitudes to learning in Industrial Arts facilities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P5.1 Listen, in orderto understand and learn.
IA9.P5.2 Demonstrate awillingness to continuouslylearn.
IA9.P5.3 Activelyparticipate in a positive manner.
IA10.P5.1 Listen andrespond, in order to understandand learn.
IA10.P5.2 Assess personallearning needs (i.e., personallearning style).
IA10.P5.3 Activelyparticipate in a positive manner.
IA11.P5.1 Listen andrespond, in order tounderstand, learn and teach.
IA11.P5.2 Identify learningsources and opportunities.
IA11.P5.3 Activelyparticipate in a positive manner.
IA12.P5.1 Listen andrespond, in order tounderstand, learn, teach, andevaluate.
IA12.P5.2 Set learninggoals and develop a personallearning plan.
IA12.P5.3 Activelyparticipate in a positive manner.
M e t a l w o r k T e c h n o l o g y 93
Personal Skills
General Learning OutcomeGLO P6 Teamwork: Adapt strategies to work effectively, independently, or as a team member to complete a project.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P6.1 Demonstrate anunderstanding of the role ofmembers of a team.
IA9.P6.2 Acknowledge theopinions and contributions of allteam members.
IA9.P6.3 List and defineteam objectives.
IA10.P6.1 Contribute to ateam to achieve its mandate.
IA10.P6.2 Respect theopinions and contributions of allteam members.
IA10.P6.3 Contribute to thedevelopment of team objectivesand goals.
IA11.P6.1 Identify the needto lead and/or support in ateam situation, in order toachieve the team mandate.
IA11.P6.2 Seek andappreciate the opinions andcontributions of all teammembers.
IA11.P6.3 �
IA12.P6.1 Understand andwork with others on a “job” toachieve the best results.
IA12.P6.2 Lead and/orsupport as appropriate tomotivate a team for highperformance.
IA12.P6.3 Develop and/orrefine a team approach basedon needs and benefits.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s94
Production Skills
General Learning OutcomeGLO MW1 Metalurgy: Demonstrate an understanding of metallurgy—science and processes.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW1.1 Identify commonmetals and their classification.
IA9.MW1.2 Interpret theSAE and AISI coding systems ofmetal
IA9.MW1.3 Describe avariety of common heat-treating processes includingannealing, hardening,tempering, normalizing, casehardening, flame hardening,induction hardening, and laserhardening.
IA9.MW1.4 Explain thepowder-metal process andadvantages.
IA10.MW1.1 �
IA10.MW1.2 �
IA10.MW1.3 �
IA10.MW1.4 �
IA11.MW1.1 �
IA11.MW1.2 �
IA11.MW1.3 �
IA11.MW1.4 �
IA12.MW1.1 Select metal forprojects and applications basedon its physical and mechanicalproperties.
IA12.MW1.2 �
IA12.MW1.3 Applyappropriate hardeningprocesses based on projectrequirements.
IA12.MW1.4 Deviseappropriate uses for thepowder-metal process.
M e t a l w o r k T e c h n o l o g y 95
Production Skills
General Learning OutcomeGLO MW2 Measurement and Layout: Use metalworking measurement and layout tools correctly and efficiently.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW2.1 Recognize andapply common measurementstandards used inmetalworking, including CSA,ANSI, ISO, metric, imperial…
IA9.MW2.2 Identify and useseveral common measurementtools used in metalworking,including rules, micrometers,dial indicators, gauges…
IA9.MW2.3 Identify and useseveral common layout toolsused in metalworking, includingcallipers, dividers, squares…
IA10.MW2.1 �
IA10.MW2.2 �
IA10.MW2.3 �
IA11.MW2.1 �
IA11.MW2.2 �
IA11.MW2.3 �
IA12.MW2.1 �
IA12.MW2.2 Identify and usemost common measurementtools used in metalworking,including rules, micrometers,dial indicators, gauges…
IA12.MW2.3 Applyappropriate layout techniquesto the creation of a metalworkproject.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s96
Production Skills
General Learning OutcomeGLO MW2 Separation: Apply separation processes to metal.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW3.1 Identify severalcommon metal separationprocesses such as cutting,drilling, grinding, turning,milling, and the use of electricalarc and gas torch…
IA9.MW3.2 Apply severalsheet and bench metalseparation processes to a metalproduct.
IA10.MW3.1 �
IA10.MW3.2 Apply severalcommon machine, gas torch,and electrical arc separationprocesses to a metal product.
IA11.MW3.1 �
IA11.MW3.2 �
IA12.MW3.1 Explain anddemonstrate most commonmetal separation processes.
IA12.MW3.2 Determine andapply the appropriate metalseparation processes requiredto safely create a metalproduct.
M e t a l w o r k T e c h n o l o g y 97
Production Skills
General Learning OutcomeGLO MW4 Fastening: Apply fastening processes to metal.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW4.1 Identify severalcommon metal fasteningprocesses such as usingthreaded fasteners, riveting,welding, gas torch fastening,electric arc fastening...
IA9.MW4.2 Apply severalmechanical, common gas torchand electrical arc metalfastening processes to a metalproduct.
IA10.MW4.1 �
IA10.MW4.2 �
IA11.MW4.1 �
IA11.MW4.2 �
IA12.MW4.1 Explain anddemonstrate most commonmetal fastening processes.
IA12.MW4.2 Determine andapply the appropriate metalfastening processes required tosafely create a metal product.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s98
Production Skills
General Learning OutcomeGLO MW5 Forming and Casting: Apply forming and casting processes to metal.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW5.1 Identify severalcommon metal forming andcasting processes such as sheetmetal forming, wrought-ironforming, forging, foundry...
IA9.MW5.2 Apply severalmechanical-forming processesto a metal product.
IA10.MW5.1 �
IA10.MW5.2 �
IA11.MW5.1 �
IA11.MW5.2 �
IA12.MW5.1 Explain anddemonstrate most commonmetal-forming processes.
IA12.MW5.2 Determine andapply the appropriate metal-forming processes required tosafely create a metal product.
M e t a l w o r k T e c h n o l o g y 99
Production Skills
General Learning OutcomeGLO MW6 Finishing: Apply finishing processes to metal considering their environmental impact.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW6.1 Identify severalcommon metal-finishingprocesses such as painting,peening, plating, polishing...
IA9.MW6.2 Apply severalcommon metal-finishingprocesses to a metal product.
IA9.MW6.3 Explain theenvironmental impact of mostcommon metal-finishingprocesses.
IA10.MW6.1 �
IA10.MW6.2 �
IA10.MW6.3 �
IA11.MW6.1 �
IA11.MW6.2 �
IA11.MW6.3 �
IA12.MW6.1 Explain anddemonstrate most commonmetal-finishing processes.
IA12.MW6.2 Determine andapply the appropriate finish to ametal product.
IA12.MW6.3 �
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s100
Production Skills
General Learning OutcomeGLO MW7 Current Innovation: Demonstrate an understanding of current innovation in metalwork processes,
applications, and emerging new technologies.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.MW7.1 Identify severalcurrent innovations inmetalworking such asComputer Numerical Control,jewellery fabrication…
IA10.MW7.1 � IA11.MW7.1 � IA12.MW7.1 Research,explain, and demonstrateseveral current innovations inmetalworking.
P o w e r M e c h a n i c s T e c h n o l o g y 103
Fundamental Skills
General Learning OutcomeGLO F1 Technical Communication: Communicate technical ideas and designs effectively and appropriately.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F1.1 Use severalpresentation programs usingexisting formats to digitallycommunicate a technical idea.
IA9.F1.2 Interpret agraphic presentation of atechnical idea.
IA9.F1.3 Recognizetechnical language and terms.
IA9.F1.4 Effectively usetechnical reading skills to followa set of instructional steps.
IA10.F1.1 Design a simplepresentation using apresentation program tocommunicate a technical idea.
IA10.F1.2 Adapt a graphicpresentation of a technicalidea.
IA10.F1.3 Use technicallanguage and terms in thecorrect context.
IA10.F1.4 Adapt a set ofinstructional steps usingappropriate technical writingskills.
IA11.F1.1 Apply anadvanced presentation programeffectively to communicate atechnical idea visually.
IA11.F1.2 Create a graphicpresentation of a technicalidea.
IA11.F1.3 Create a set ofsteps using correct technicalwriting techniques to effectivelydescribe a technical process.
IA12.F1.1 Apply anappropriate combination ofdigital, graphic, oral, andwritten techniques to effectivelycommunicate a technical idea.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s104
Fundamental Skills
General Learning OutcomeGLO F2 Problem Solving: Apply effective decision-making, problem-solving, and design strategies to a project.
(Refer to Appendix B for a sample design/problem-solving process.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F2.1 Demonstrate anunderstanding of the problem-solving process in designingand producing a product.
IA9.F2.2 Identify criteriafor making and evaluatingchoices.
IA9.F2.3 Demonstrate anunderstanding of the qualitiesof good design.
IA10.F2.1 Identifyproblems and apply appropriateproblem-solving skills to solvethem.
IA10.F2.2 Apply a decision-making strategy to practicalsituations.
IA10.F2.3 Modify anexisting design to meetspecified criteria.
IA11.F2.1 Transferproblem-solving skills to real-life situations.
IA11.F2.2 Use a variety ofcritical thinking skills toevaluate situations and makedecisions.
IA11.F2.3 Create a designto meet a set of specifications.
IA12.F2.1 Research andarticulate a problem that canbe solved through technologicalmeans.
IA12.F2.2 Apply problem-solving and design skills todevelop a technological solutionto a problem.
IA12.F2.3 Analyze criticallyand act logically to evaluatesituations and make decisions.
P o w e r M e c h a n i c s T e c h n o l o g y 105
Fundamental Skills
General Learning OutcomeGLO F3 Information Management: Effectively manage information.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F3.1 Acquire andorganize information usingappropriate technology andinformation systems.
IA9.F3.2 Demonstrate theappropriate use of informationas directed.
IA10.F3.1 Apply specializedinformation and skills in real-lifesituations.
IA10.F3.2 Access and use arange of relevant information,material, and human resourceswith limited direction.
IA11.F3.1 Transfer andapply specialized informationand skills in a variety ofsituations.
IA11.F3.2 Acquire and usea range of relevant information,material, and human resources,and recognize when additionalresources are required.
IA12.F3.1 Acquire, analyze,and apply specializedinformation and skills fromvarious disciplines in a varietyof realistic circumstances.
IA12.F3.2 Support andenhance basic informationrequirements by using a widevariety of information, material,and human resources.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s106
Personal Skills
General Learning OutcomeGLO P1 Time Management: Demonstrate responsibility in time management, task completion, and in meeting
project criteria. (Note: based on the Conference Board of Canada’s Personal Management Skills)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P1.1 Demonstrateresponsibility in timemanagement.
IA9.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA9.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA9.P1.4 Complete allassigned tasks within stateddeadlines.
IA9.P1.5 Complete allprojects according to specifiedcriteria.
IA10.P1.1 Demonstrateresponsibility in timemanagement.
IA10.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA10.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA10.P1.4 Complete allassigned tasks within stateddeadlines.
IA10.P1.5 Complete allprojects according to specifiedcriteria.
IA11.P1.1 Demonstrateresponsibility in timemanagement.
IA11.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA11.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA11.P1.4 Complete allassigned tasks within stateddeadlines.
IA11.P1.5 Complete allprojects according to specifiedcriteria.
IA12.P1.1 Demonstrateresponsibility in timemanagement.
IA12.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA12.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA12.P1.4 Complete allassigned tasks within stateddeadlines.
IA12.P1.5 Complete allprojects according to specifiedcriteria.
P o w e r M e c h a n i c s T e c h n o l o g y 107
Personal Skills
General Learning OutcomeGLO P2 Ethical Decision Making: Make ethical decisions concerning the impact of one’s activities and the use of
technology.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P2.1 Make personaljudgments whether certainbehaviours/actions are right orwrong.
IA9.P2.2 Demonstrate anunderstanding of technologicalimpact on the environment,society, lifestyles, etc.
IA10.P2.1 Assess howpersonal judgments affect peermembers and/or communitymembers.
IA10.P2.2 Demonstrate anunderstanding of the impact oftechnological choices.
IA11.P2.1 Assess theimplications of personal/groupactions within the broadercommunity.
IA11.P2.2 Develop andimplement risk-managementstrategies for a variety oftechnological activities.
IA12.P2.1 Analyze theimplications of personal/groupactions within the globalcontext.
IA12.P2.2 State andsupport a personal code ofethics as required.
IA12.P2.3 Demonstrateresponsible leadership inmanaging current and futuretechnologies on theenvironment and on society.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s108
Personal Skills
General Learning OutcomeGLO P3 Career Planning: Develop an action plan relating personal aptitudes and abilities to occupational
opportunities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P3.1 Identify criticalskills needed for employabilityin today's workplace.
IA9.P3.2 Demonstrate anawareness of the technologiesof specific occupations andworkplaces.
IA10.P3.1 Evaluateemployability profiles for avariety of workplaces andcareers.
IA10.P3.2 Outline skillsrequired for a specific careerpath.
IA11.P3.1 Developstrategies to assess personaltechnological literacy andcapability.
IA11.P3.2 Perform anassessment of personalstrengths and weaknesses(career portfolio).
IA12.P3.1 Assess specificpersonal skills, interests, andabilities (career portfolio).
IA12.P3.2 Develop a planfor acquiring the technologicalcapabilities required to achievea career vision (careerportfolio).
P o w e r M e c h a n i c s T e c h n o l o g y 109
Personal Skills
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes. (Refer
to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, Manitoba Education andYouth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA9.P4.2 Identifyimmediate hazards and theirimpact on self, others, and theenvironment.
IA9.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA10.P4.1 Recognize andfollow personal andenvironmental health andsafety procedures.
IA10.P4.2 Identifyimmediate and potentialhazards and their impact onself, others, and theenvironment.
IA10.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA11.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment.
IA11.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
IA12.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment, and recommendsafe procedures.
IA12.P4.3 Identify andfollow appropriate emergencyresponse procedures.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s110
Personal Skills
General Learning OutcomeGLO P5 Positive Attitude: Demonstrate positive attitudes to learning in Industrial Arts facilities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P5.1 Listen, in orderto understand and learn.
IA9.P5.2 Demonstrate awillingness to continuouslylearn.
IA9.P5.3 Activelyparticipate in a positive manner.
IA10.P5.1 Listen andrespond, in order to understandand learn.
IA10.P5.2 Assess personallearning needs (i.e., personallearning style).
IA10.P5.3 Activelyparticipate in a positive manner.
IA11.P5.1 Listen andrespond, in order tounderstand, learn and teach.
IA11.P5.2 Identify learningsources and opportunities.
IA11.P5.3 Activelyparticipate in a positive manner.
IA12.P5.1 Listen andrespond, in order tounderstand, learn, teach, andevaluate.
IA12.P5.2 Set learninggoals and develop a personallearning plan.
IA12.P5.3 Activelyparticipate in a positive manner.
P o w e r M e c h a n i c s T e c h n o l o g y 111
Personal Skills
General Learning OutcomeGLO P6 Teamwork: Adapt strategies to work effectively, independently, or as a team member to complete a project.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P6.1 Demonstrate anunderstanding of the role ofmembers of a team.
IA9.P6.2 Acknowledge theopinions and contributions of allteam members.
IA9.P6.3 List and defineteam objectives.
IA10.P6.1 Contribute to ateam to achieve its mandate.
IA10.P6.2 Respect theopinions and contributions of allteam members.
IA10.P6.3 Contribute to thedevelopment of team objectivesand goals.
IA11.P6.1 Identify the needto lead and/or support in ateam situation, in order toachieve the team mandate.
IA11.P6.2 Seek andappreciate the opinions andcontributions of all teammembers.
IA12.P6.1 Understand andwork with others on a “job” toachieve the best results.
IA12.P6.2 Lead and/orsupport as appropriate tomotivate a team for highperformance.
IA12.P6.3 Develop and/orrefine a team approach basedon needs and benefits.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s112
Production Skills
General Learning OutcomeGLO PM1 Energy Conversion: Demonstrate an understanding of the theory of internal combustion and alternate
energy converters.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM1.1 Identify severalmethods of converting fuel tomechanical energy such asinternal combustion, hydrogenfuel cell, diesel engines (glowplug .049 model)…
IA9.PM1.2 Identify severaltypes and applications ofinternal combustion enginessuch as two-stroke, four-stroke,rotary, diesel, K-cycle…
IA9.PM1.3 Identify the basicparts of several types ofinternal combustion engines.
IA10.PM1.1 �
IA10.PM1.2 �
IA10.PM1.3 �
IA11.PM1.1 �
IA11.PM1.2 �
IA11.PM1.3 �
IA12.PM1.1 Explain anddemonstrate the principlesbehind several methods ofconverting fuel to mechanicalenergy.
IA12.PM1.2 Explain anddemonstrate in detail theoperation and cycles of mosttypes of internal combustionengines.
IA12.PM1.3 Disassemble,identify, and explain theoperation of the basic parts ofmost internal combustionengines.
P o w e r M e c h a n i c s T e c h n o l o g y 113
Production Skills
General Learning OutcomeGLO PM2 Engine Systems: Identify and analyze various engine systems.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM2.1 Identify the partsof the fuel and enginemanagement system in aninternal combustion enginesuch as the fuel injector,throttle, fuel pressure regulator,idle air control valve...
IA9.PM2.2 Identify the partsof the filtering system in aninternal combustion enginesuch as the engine air filter, oilfilter, automatic transmissionfilter...
IA9.PM2.3 Identify the partsof the cooling system in aninternal combustion enginesuch as the radiator, fan,shroud, water pump...
IA9.PM2.4 Identify the partsof the exhaust and emissionssystem of an internalcombustion engine such as theEGR valve, catalytic converter,muffler…
IA10.PM2.1 �
IA10.PM2.2 �
IA10.PM2.3 �
IA10.PM2.4 �
IA11.PM2.1 �
IA11.PM2.2 �
IA11.PM2.3 �
IA11.PM2.4 �
IA12.PM2.1 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of the fuelmanagement system in aninternal combustion engine.
IA12.PM2.2 Identify, explainthe operation of andclean/replace the parts of thefiltering system of an internalcombustion engine.
IA12.PM2.3 Identify, explain,and adjust/repair (whenpossible) the parts of thecooling system of an internalcombustion engine.
IA12.PM2.4 Identify, explain,and adjust/repair (whenpossible) the parts of theexhaust and emissions systemof an internal combustionengine.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s114
Production Skills
General Learning OutcomeGLO PM3 Electrical Systems: Understand the basic electrical principles applied to power mechanics systems.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM3.1 Identify the partsof the wiring system in aninternal combustion enginesuch as the circuit protectiondevices, wire harness…
IA9.PM3.2 Identify the partsof the starting system in aninternal combustion enginesuch as the starter motor,starter solenoid…
IA9.PM3.3 Identify the partsof the charging system in aninternal combustion enginesuch as the alternator, battery…
IA10.PM3.1 �
IA10.PM3.2 �
IA10.PM3.3 �
IA11.PM3.1 �
IA11.PM3.2 �
IA11.PM3.3 �
IA12.PM3.1 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of the wiringsystem in an internalcombustion engine.
IA12.PM3.2 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of thestarting system in an internalcombustion engine.
IA12.PM3.3 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of thecharging system in an internalcombustion engine.
P o w e r M e c h a n i c s T e c h n o l o g y 115
Production Skills
General Learning OutcomeGLO PM4 Mechanical Systems: Identify and analyze the mechanical systems of an internal combustion engine.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM4.1 Identify the partsof the transmission system inan internal combustion enginesuch as the torque converter,input shaft, planetary gearsets…
IA9.PM4.2 Identify the partsof the power train system in aninternal combustion enginesuch as the camshaft,driveshaft, differential, PCMmodule…
IA10.PM4.1 �
IA10.PM4.2 �
IA11.PM4.1 �
IA11.PM4.2 �
IA12.PM4.1 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of thetransmission system in aninternal combustion engine.
IA12.PM4.2 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of the powertrain system in an internalcombustion engine.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s116
Production Skills
General Learning OutcomeGLO PM5 Chassis Systems: Identify and compare various automotive chassis systems.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM5.1 Identify the partsof the brake system of anautomobile such as the brakedrums, brake lines, mastercylinder, ABS modulator…
IA9.PM5.2 Identify the partsof the ride and handling systemof an automobile such as theshock absorbers, stabilizer bar,Macpherson struts…
IA9.PM5.3 Identify the partsof the steering system of anautomobile such as the power-steering pump, tie-rod ends,pitman arm…
IA10.PM5.1 �
IA10.PM5.2 �
IA10.PM5.3 �
IA11.PM5.1 �
IA11.PM5.2 �
IA11.PM5.3 �
IA12.PM5.1 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of the brakesystem in an automobile.
IA12.PM5.2 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of the rideand handling system in anautomobile.
IA12.PM5.3 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of thesteering system in anautomobile.
P o w e r M e c h a n i c s T e c h n o l o g y 117
Production Skills
General Learning OutcomeGLO PM6 Climate Control Systems: Identify and analyze the climate control systems in an automobile.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM6.1 Identify the partsof the heating system of anautomobile such as the heatercore, blower motor, hoses…
IA9.PM6.2 Identify the partsof the air-conditioning systemof an automobile such as thecondenser, compressor,evaporator…
IA10.PM6.1 �
IA10.PM6.2 �
IA11.PM6.1 �
IA11.PM6.2 �
IA12.PM6.1 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of theheating system in anautomobile.
IA12.PM6.2 Identify, explainthe operation and function of,and adjust/repair (whenpossible) the parts of the air-conditioning system in anautomobile.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s118
Production Skills
General Learning OutcomeGLO PM7 Assembly/Disassembly Tools: Demonstrate the use of tools and equipment in assembly and
disassembly of mechanical components.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM7.1 Identify and usetools common to powermechanics such as hand tools,power tools, hoists, jacks…
IA9.PM7.2 Identify and usecommon reconditioning toolsused in power mechanics suchas lathes, wire wheels, seatgrinde…
IA9.PM7.3 Identify commonfasteners used on automobilessuch as bolts, rivets, pins…
IA9.PM7.4 Identify toolsand materials used with seals inautomobiles such as gasketrubber, gasket felt, silicon seal,glues…
IA9.PM7.5 Identify themanuals and manual systemsused in automobile repair.
IA10.PM7.1 �
IA10.PM7.2 �
IA10.PM7.3 �
IA10.PM7.4 �
IA10.PM7.5 �
IA11.PM7.1 �
IA11.PM7.2 �
IA11.PM7.3 �
IA11.PM7.4 �
IA11.PM7.5 �
IA12.PM7.1 Determine andapply the appropriate tool for agiven power mechanics task.
IA12.PM7.2 Determine andapply the appropriate tool for agiven engine reconditioningtask.
IA12.PM7.3 Determine andapply the appropriate fastenerfor a given task.
IA12.PM7.4 Determine andapply the appropriate seal,gasket, and/or adhesive for agiven sealing task.
IA12.PM7.5 Use anautomotive manual to obtainrepair information.
P o w e r M e c h a n i c s T e c h n o l o g y 119
Production Skills
General Learning OutcomeGLO PM8 Diagnostic Tools: Use diagnostic tools and methods to troubleshoot, diagnose, and repair power
mechanical systems.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM8.1 Identify commonautomotive diagnostic toolssuch as ignition testers,charging system analyzers,scopes, scanners…
IA9.PM8.2 Explain commonautomotive diagnostictechniques such as the sparktest, compression test, fueldelivery test, ignition timing…
IA10.PM8.1 �
IA10.PM8.2 �
IA11.PM8.1 �
IA11.PM8.2 �
IA12.PM8.1 Use appropriatediagnostic tools and problem-solving methods to analyze andrepair automotive issues.
IA12.PM8.2 Use appropriatediagnostic techniques andproblem-solving methods toanalyze and repair automotiveissues.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s120
Production Skills
General Learning OutcomeGLO PM9 Environmental Impact and Current Innovations: Demonstrate an understanding of current
innovation in automotive industry, environmental impacts, and emerging new technologies.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.PM9.1 Identify severalcurrent innovations in theautomotive industry such ascontinuously variabletransmissions, advancedsuspension systems, modularvehicle assembly, use of newmaterials…
IA9.PM9.2 Identify severalcurrent issues and innovationsregarding the automotiveindustry and environmentalimpact such as emission issues,energy consumption,sustainable development…
IA10.PM9.1 �
IA10.PM9.2 �
IA11.PM9.1 �
IA11.PM9.2 �
IA12.PM9.1 Research,explain, and demonstrateseveral current innovations inthe automotive industry.
IA12.PM9.2 Research,explain, and demonstrateseveral current issues andinnovations regarding theautomotive industry andenvironmental impact.
W o o d w o r k T e c h n o l o g y 123
Fundamental Skills
General Learning OutcomeGLO F1 Technical Communication: Communicate technical ideas and designs effectively and appropriately.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F1.1 Use severalpresentation programs usingexisting formats to digitallycommunicate a technical idea.
IA9.F1.2 Interpret agraphic presentation of atechnical idea.
IA9.F1.3 Recognizetechnical language and terms.
IA9.F1.4 Effectively usetechnical reading skills to followa set of instructional steps.
IA10.F1.1 Design a simplepresentation using apresentation program tocommunicate a technical idea.
IA10.F1.2 Adapt a graphicpresentation of a technicalidea.
IA10.F1.3 Use technicallanguage and terms in thecorrect context.
IA10.F1.4 Adapt a set ofinstructional steps usingappropriate technical writingskills.
IA11.F1.1 Apply anadvanced presentation programeffectively to communicate atechnical idea visually.
IA11.F1.2 Create a graphicpresentation of a technicalidea.
IA11.F1.3 Create a set ofsteps using correct technicalwriting techniques to effectivelydescribe a technical process.
IA12.F1.1 Apply anappropriate combination ofdigital, graphic, oral, andwritten techniques to effectivelycommunicate a technical idea.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s124
Fundamental Skills
General Learning OutcomeGLO F2 Problem Solving: Apply effective decision-making, problem-solving, and design strategies to a project.
(Refer to Appendix B for a sample design/problem-solving process.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F2.1 Demonstrate anunderstanding of the problem-solving process in designingand producing a product.
IA9.F2.2 Identify criteriafor making and evaluatingchoices.
IA9.F2.3 Demonstrate anunderstanding of the qualitiesof good design.
IA10.F2.1 Identifyproblems and apply appropriateproblem-solving skills to solvethem.
IA10.F2.2 Apply a decision-making strategy to practicalsituations.
IA10.F2.3 Modify anexisting design to meetspecified criteria.
IA11.F2.1 Transferproblem-solving skills to real-life situations.
IA11.F2.2 Use a variety ofcritical thinking skills toevaluate situations and makedecisions.
IA11.F2.3 Create a designto meet a set of specifications.
IA12.F2.1 Research andarticulate a problem that canbe solved through technologicalmeans.
IA12.F2.2 Apply problem-solving and design skills todevelop a technological solutionto a problem.
IA12.F2.3 Analyze criticallyand act logically to evaluatesituations and make decisions.
W o o d w o r k T e c h n o l o g y 125
Fundamental Skills
General Learning OutcomeGLO F3 Information Management: Effectively manage information.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.F3.1 Acquire andorganize information usingappropriate technology andinformation systems.
IA9.F3.2 Demonstrate theappropriate use of informationas directed.
IA10.F3.1 Apply specializedinformation and skills in real-lifesituations.
IA10.F3.2 Access and use arange of relevant information,material, and human resourceswith limited direction.
IA11.F3.1 Transfer andapply specialized informationand skills in a variety ofsituations.
IA11.F3.2 Acquire and usea range of relevant information,material, and human resources,and recognize when additionalresources are required.
IA12.F3.1 Acquire, analyze,and apply specializedinformation and skills fromvarious disciplines in a varietyof realistic circumstances.
IA12.F3.2 Support andenhance basic informationrequirements by using a widevariety of information, material,and human resources.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s126
Personal Skills
General Learning OutcomeGLO P1 Time Management: Demonstrate responsibility in time management, task completion, and in meeting
project criteria. (Note: based on the Conference Board of Canada’s Personal Management Skills)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P1.1 Demonstrateresponsibility in timemanagement.
IA9.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA9.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA9.P1.4 Complete allassigned tasks within stateddeadlines.
IA9.P1.5 Complete allprojects according to specifiedcriteria.
IA10.P1.1 Demonstrateresponsibility in timemanagement.
IA10.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA10.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA10.P1.4 Complete allassigned tasks within stateddeadlines.
IA10.P1.5 Complete allprojects according to specifiedcriteria.
IA11.P1.1 Demonstrateresponsibility in timemanagement.
IA11.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA11.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA11.P1.4 Complete allassigned tasks within stateddeadlines.
IA11.P1.5 Complete allprojects according to specifiedcriteria.
IA12.P1.1 Demonstrateresponsibility in timemanagement.
IA12.P1.2 Demonstrateresponsibility in beingaccountable for one’s actions.
IA12.P1.3 Arrive at classprepared with materials andcompleted assignments.
IA12.P1.4 Complete allassigned tasks within stateddeadlines.
IA12.P1.5 Complete allprojects according to specifiedcriteria.
W o o d w o r k T e c h n o l o g y 127
Personal Skills
General Learning OutcomeGLO P2 Ethical Dicision Making: Make ethical decisions concerning the impact of one’s activities and the use of
technology.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P2.1 Make personaljudgments whether certainbehaviours/actions are right orwrong.
IA9.P2.2 Demonstrate anunderstanding of technologicalimpact on the environment,society, lifestyles, etc.
IA10.P2.1 Assess howpersonal judgments affect peermembers and/or communitymembers.
IA10.P2.2 Demonstrate anunderstanding of the impact oftechnological choices.
IA11.P2.1 Assess theimplications of personal/groupactions within the broadercommunity.
IA11.P2.2 Develop andimplement risk managementstrategies for a variety oftechnological activities.
IA12.P2.1 Analyze theimplications of personal/groupactions within the globalcontext.
IA12.P2.2 State andsupport a personal code ofethics as required.
IA12.P2.3 Demonstrateresponsible leadership inmanaging current and futuretechnologies on theenvironment and on society.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s128
Personal Skills
General Learning OutcomeGLO P3 Career Planning: Develop an action plan relating personal aptitudes and abilities to occupational
opportunities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P3.1 Identify criticalskills needed for employabilityin today's workplace.
IA9.P3.2 Demonstrate anawareness of the technologiesof specific occupations andworkplaces.
IA10.P3.1 Evaluateemployability profiles for avariety of workplaces andcareers.
IA10.P3.2 Outline skillsrequired for a specific careerpath.
IA11.P3.1 Developstrategies to assess personaltechnological literacy andcapability.
IA11.P3.2 Perform anassessment of personalstrengths and weaknesses(career portfolio).
IA12.P3.1 Assess specificpersonal skills, interests, andabilities (career portfolio).
IA12.P3.2 Develop a planfor acquiring the technologicalcapabilities required to achievea career vision (careerportfolio).
W o o d w o r k T e c h n o l o g y 129
Personal Skills
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes. (Refer
to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, Manitoba Education andYouth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA9.P4.2 Identifyimmediate hazards and theirimpact on self, others, and theenvironment.
IA9.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA10.P4.1 Recognize andfollow personal andenvironmental health andsafety procedures.
IA10.P4.2 Identifyimmediate and potentialhazards and their impact onself, others, and theenvironment.
IA10.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA11.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment.
IA11.P4.3 Identify andfollow appropriate emergencyresponse procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
IA12.P4.2 Identifyimmediate and potentialhazards and assess their impacton self, others, and theenvironment, and recommendsafe procedures.
IA12.P4.3 Identify andfollow appropriate emergencyresponse procedures.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s130
Personal Skills
General Learning OutcomeGLO P5 Positive Attitude: Demonstrate positive attitudes to learning in Industrial Arts facilities.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P5.1 Listen, in orderto understand and learn.
IA9.P5.2 Demonstrate awillingness to continuouslylearn.
IA9.P5.3 Activelyparticipate in a positive manner.
IA10.P5.1 Listen andrespond, in order to understandand learn.
IA10.P5.2 Assess personallearning needs (i.e., personallearning style).
IA10.P5.3 Activelyparticipate in a positive manner.
IA11.P5.1 Listen andrespond, in order tounderstand, learn and teach.
IA11.P5.2 Identify learningsources and opportunities.
IA11.P5.3 Activelyparticipate in a positive manner.
IA12.P5.1 Listen andrespond, in order tounderstand, learn, teach, andevaluate.
IA12.P5.2 Set learninggoals and develop a personallearning plan.
IA12.P5.3 Activelyparticipate in a positive manner.
W o o d w o r k T e c h n o l o g y 131
Personal Skills
General Learning OutcomeGLO P6 Teamwork: Adapt strategies to work effectively, independently, or as a team member to complete a project.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P6.1 Demonstrate anunderstanding of the role ofmembers of a team.
IA9.P6.2 Acknowledge theopinions and contributions of allteam members.
IA9.P6.3 List and defineteam objectives.
IA10.P6.1 Contribute to ateam to achieve its mandate.
IA10.P6.2 Respect theopinions and contributions of allteam members.
IA10.P6.3 Contribute to thedevelopment of team objectivesand goals.
IA11.P6.1 Identify the needto lead and/or support in ateam situation, in order toachieve the team mandate.
IA11.P6.2 Seek andappreciate the opinions andcontributions of all teammembers.
IA12.P6.1 Understand andwork with others on a “job” toachieve the best results.
IA12.P6.2 Lead and/orsupport as appropriate tomotivate a team for highperformance.
IA12.P6.3 Develop and/orrefine a team approach basedon needs and benefits.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s132
Production Skills
General Learning OutcomeGLO WW1 Wood, Products, and Processes: Demonstrate an understanding of woodwork—woods, wood products,
and processes.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW1.1 Identify commonwoods, their classification ashardwood or softwood, andtheir properties such as type,species, grain texture…
IA9.WW1.2 Identify severalcommon wood products suchas plywoods, laminates,veneers, particleboard…
IA10.WW1.1 �
IA10.WW1.2 �
IA11.WW1.1 �
IA11.WW1.2 �
IA12.WW1.1 Selectappropriate wood type, basedon its properties for projectsand applications.
IA12.WW1.2 Selectappropriate wood productsbased on project requirements.
W o o d w o r k T e c h n o l o g y 133
Production Skills
General Learning OutcomeGLO WW2 Measurement and Layout: Use woodworking measurement and layout tools, correctly and efficiently.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW2.1 Recognize andapply common measurementstandards used in woodworkingincluding CSA, ANSI, ISO,metric, imperial, moisturecontent…
IA9.WW2.2 Identify and useseveral common measurementtools used in woodworkingincluding rules, tapes, dividers,wood-moisture meters…
IA9.WW2.3 Identify and useseveral common layout toolsused in woodwork includingsquares, levels, lasers, slidingbevels, marking gauges…
IA10.WW2.1 �
IA10.WW2.2 �
IA10.WW2.3 �
IA11.WW2.1 �
IA11.WW2.2 �
IA11.WW2.3 �
IA12.WW2.1 �
IA12.WW2.2 Identify and usemost common measurementtools used in woodworkingincluding rules, tapes, dividers,wood-moisture meters…
IA12.WW2.3 Applyappropriate layout techniquesto the creation of a woodworkproject.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s134
Production Skills
General Learning OutcomeGLO WW3 Separation: Apply separation processes to wood.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW3.1 Identify severalcommon wood-separationprocesses such as cutting,drilling, turning, routing,sanding…
IA9.WW3.2 Apply severalhand tool wood-separationprocesses to a product.
IA10.WW3.1 �
IA10.WW3.2 �
IA11.WW3.1 �
IA11.WW3.2 �
IA12.WW3.1 Explain anddemonstrate most commonwood-separation processes.
IA12.WW3.2 Determine andapply the appropriate wood-separation processes requiredto safely create a woodproduct.
W o o d w o r k T e c h n o l o g y 135
Production Skills
General Learning OutcomeGLO WW4 Fastening: Apply fastening processes and specialty hardware to wood, correctly and effieciently.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW4.1 Identify severalcommon wood-fasteningprocesses such as using:threaded fasteners, adhesives,nails, specialty fasteninghardware...
IA9.WW4.2 Apply severalfastening processes to a woodproduct.
IA9.WW4.3 Identify severalcommon types of specialtyhardware used in creatingwood projects such as hinges,glides, pulls, shelf hardware,casters…
IA10.WW4.1 �
IA10.WW4.2 �
IA10.WW4.3 �
IA11.WW4.1 �
IA11.WW4.2 �
IA11.WW4.3 �
IA12.WW4.1 Identify anddescribe the classification andtypes of several common wood-fastening processes.
IA12.WW4.2 Determine andapply the appropriate wood-fastening processes required tocreate a wood product.
IA12.WW4.3 Determine andinstall the type of specialtyhardware required for a project.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s136
Production Skills
General Learning OutcomeGLO WW5 Wood Joints: Apply joints and joining techniques to wood.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW5.1 Identify severalcommon wood joints such asbutt, box, dado, dovetail, lap,mitre, mortise and tenon,rabbet, tongue and groove...
IA9.WW5.2 Identify severalcommon fastener forms used inwood joints such as corrugatedfasteners, dowels, splines,braces, special connectors.
IA9.WW5.3 Use severaltypes of wood joints and wood-joining techniques in thefabrication of a wood product.
IA10.WW5.1 �
IA10.WW5.2 �
IA10.WW5.3 �
IA11.WW5.1 �
IA11.WW5.2 �
IA11.WW5.3 �
IA12.WW5.1 List the uses andproperties of most wood joints.
IA12.WW5.2 List the uses andproperties of most wood-joiningtechniques.
IA12.WW5.3 Determine andapply the appropriate woodjoint and/or wood-joiningtechnique to the fabrication ofa wood product.
W o o d w o r k T e c h n o l o g y 137
Production Skills
General Learning OutcomeGLO WW6 Finishing: Apply finishing processes to wood considering their environmental impact.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW6.1 Identify severalcommon wood-finishingprocesses such as sanding,staining, painting, varnishing…
IA9.WW6.2 Explain theenvironmental impact of mostcommon wood-finishingprocesses.
IA9.WW6.3 Apply severalcommon wood-finishingprocesses to a product.
IA10.WW6.1 �
IA10.WW6.2 �
IA10.WW6.3 �
IA11.WW6.1 �
IA11.WW6.2 �
IA11.WW6.3 �
IA12.WW6.1 Identify andexplain the properties of mostcommon wood-finishingprocesses.
IA12.WW6.2 �
IA12.WW6.3 Determine andapply the appropriate finish to awood product.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s138
Production Skills
General Learning OutcomeGLO WW7 Current Innovation: Demonstrate an understanding of current innovation in woodwork processes,
applications, and emerging new technologies.
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.WW7.1 Identify severalcurrent innovations inwoodwork such as ComputerNumerical Control, strand woodproducts, glulam products,computer log and lumberanalysis, factory-made housing,structural insulated panels…
IA10.WW7.1 � IA11.WW7.1 � IA12.WW7.1 Research,explain, and demonstrateseveral current innovations inwoodwork.
A p p e n d i c e s 141
What Are the Characteristics of Good LearningOutcomes?
Learning outcomes have three distinguishing characteristics.The specific action by the learner must be
1. observable2. measurable3. obtainable
The SLOs help teachers to focus on particular aspects ofknowledge and skills as they plan learning activities for theirstudents.
Tips for Rewriting Objectives as Learning Outcomes
• Start with the Grade 12 learning outcomes and proceed tothe Grade 11, Grade 10, and then finally the Grade 9learning outcomes. Use a backward process.
• Compare the learning outcomes in each category withwhat you are currently doing in the classroom.
• The Specific Learning Outcomes have to support theGeneral Learning Outcome.
A P P E N D I X A : W R I T I N G L E A R N I N G O U T C O M E S
Sample Set of Specific Learning Outcomes
General Learning OutcomeGLO P4 Safe Practices: Demonstrate safe practices with tools, machines, materials, and related processes. (Refer
to: Keeping Your Facilities SAFE: A Support Document for Industrial Arts Teachers, Manitoba Education andYouth, 2003.)
Grade 9Specific Learning Outcome(s)
Grade 10Specific Learning Outcome(s)
Grade 11Specific Learning Outcome(s)
Grade 12Specific Learning Outcome(s)
IA9.P4.1 Follow personaland environmental health andsafety procedures.
IA10.P4.1 Recognize andfollow personal andenvironmental health andsafety procedures.
IA11.P4.1 Establish andfollow personal andenvironmental health andsafety procedures.
IA12.P4.1 Transfer andapply personal andenvironmental health andsafety procedures to a varietyof environments and situations.
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s142
Interpersonal Verbs
AdviseArticulateAssignCoachCommunicate anopinion
ComposeContributeCreateDemonstrateDesignDiscussDisplayEducateEmpathizeEncounterEvaluate
ExperienceExplainGive feedbackIdentifyIllustrateImproveInterpretInterviewInstructJustifyListenMotivateOrganizePerceivePlanPlayPractise
PresentProjectReceive feedbackRecordRelateRole-playSeekShareShowSolveSpell outTeachTrainTranslateWrite
Intrapersonal Verbs
AccessAdvocateAmendAnalyzeApplyAppraiseAssessAssimilateAwardChooseCommunicate anidea
CompareContrastConcentrateConcludeContributeCreateCritiqueDecideDefendDemonstrateDescribeDetermine
DiscriminateDrawEvaluateExplainExploreFocusIllustrateImagineInterpolateInterpretJudgeList
Verb List for WritingStudent Learning Outcomes
Verbal/Linguistic Verbs
AdaptAddressAmendAnswerArgueArticulateAssociateComposeConvertConvinceCreateCritiqueDebateDefendDefineDemonstrateDescribeDeviseDiscussDisplayDistinguishDraftElaborateEmbellishEnrichEnunciateExpandExplain
Express in otherterms
ExtendFormGeneralizeGenerateGive examplesGive in own wordsIndicateInformInterviewIntroduceInventJustifyLabelListListenMake upMemorizeModifyNameParaphrasePoint outPredictPrescribePresentPretendProducePublish
QuestionQuoteReadRecallReciteRecognizeRecommendRedirectRelateRepeatReportRestateRespondRetellRewordRewriteReviseSpecifyStateSuggestSummarizeSynthesizeTeachTellTranslateTransmitUseWrite
A p p e n d i c e s 143
Logical/Mathematical Verbs (continued)
RankResolveSelectSeparate
SequenceSimplifySolveTest
TrackTranslateUnifyVerify
Visual/Spatial Verbs
BuildCastChangeChartConvertComposeCopyCreateDecorateDemonstrateDesignDiagramDistinguishDivideDrawElaborate
EmbellishEnlargeExpandFormFormulateGraphIdentifyIllustrateImproveIntegrateInterpretInventLabelListMakeMark
Mind mapModelOrganizeOriginateOutlineProduceRearrangeRecognizeRenderReorderRepresentReproduceShowSketchTransform
Body/Kinesthetic Verbs
Act outAdjustApplyArrangeBend
BlendBuildCategorizeChangeChoose
ClassifyCollect informationCombineCompareCompile
Intrapersonal Verbs (continued)
MakeNarratePlanPoint outPositionPractisePrepareProposeRankRate
RecognizeRecountRedrawReflectReportReviewReviseRewriteSelectSelf-reflect
ShareShowSuggestSupportTellTrackUseValidateWrite
Logical/Mathematical Verbs
AnalyzeAppraiseApplyArrangeBrainstormBreak downCalculateCause/EffectCheckClassifyCombineCompareComputeConcludeContrastConvertCountCriticizeDecide
DecipherDeduceDemonstrateDeriveDetectDetermineDevelopDeviseDifferentiateDiscernDiscoverDiscriminateDistinguishEstimateEvaluateExamineExerciseExtrapolateFind examples
Find relationshipsFind unknownFormulateGraspHypothesizeInferIntegrateInterpretLinkMeasureModifyObserveOrderOutlinePlotPonderPredictProvePuzzle
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s144
Musical/Rhythmic Verbs
AmplifyArrangeBlendClassifyCompare/ContrastComposeCreateDemonstrateElevateEnhanceExplainExpress
HarmonizeHearHumIllustrateIncorporateInterpretListenMake upModifyOrchestratePerformPlay
PractisePresentProduceRepresentRetellSelectShowSingStageTrainModifyWrite about
Body/Kinesthetic Verbs (continued)
CompleteConductConstructCountCreateDemonstrateDesignDetermineDevelopDeviseDiscoverDisplayDivideDocumentDramatizeEngageErectExamineExecuteExerciseExperimentFill inFindFoldFormFuseGaugeGroupImitateInspectInterpretInventInvestigate
JumpKeep recordsLeapLocateMakeMake upManipulateMatchMeasureModelModifyMoveOperateOrderOrganizeParticipatePerformPickPlanPointPostPractisePreparePresentProducePutPut in orderPut to usePut togetherRearrangeReconstructRecordReorder
ReorganizeRestructureRole-playRotateSearchSelectSeparateShakeShowSimulateSortSpinSpringStageStandStretchSubdivideSurveyTabulateTake apartTouchTraceTrackTrainTransferTurnTwistUncoverUnderlineUseVaultWrite
A p p e n d i c e s 145
The design/problem-solving process could include thefollowing steps:
1. Stating the Problem—demonstrating a need
2 Developing the Design Brief—describing what is to bedesigned, simply and clearly
3. Investigating—listing all of the information that may beneeded. Some areas of consideration are:
� Function—a functional object must solve theproblem described in the design brief
� Appearance—the shape, colour, and textureshould make the product attractive
� Materials—availability, cost, and physicalproperties should all be considered
� Production—the product should be capable ofbeing efficiently produced
� Safety—the product should be able to be producedand used safely
4. Developing Alternative Solutions� considering a number of solutions� recording all ideas
5. Choosing a Solution� selecting the best solution after comparing the
solutions to the original design brief� giving consideration to the manufacturer’s skills,
the availability of materials, the time needed tocomplete, and the final costs
6. Creating Models and/or Prototypes� creating the first working version of the designer’s
solution� confirming the chosen solution
7. Testing and Evaluating—answering these basicquestions:
� Does it work?� Does it meet the design brief?� Will modification improve the solution?
8. Starting Production—making the product once thedesign is finalized
A P P E N D I X B : A D E S I G N / P R O B L E M - S O L V I N G P R O C E S S
R e f e r e n c e s 149
ACDelco—Automotive Systems Guide. Homepage. 2007.<www.acdelco.com/services/index.jsp>. (23 May 2007).
Alberta Education. Career and Technology Studies. Edmonton,AB: Alberta Education, 1997.
Atlantic Provinces Education Foundation. Foundation for theAtlantic Canada Technology Education Curriculum. Halifax,NS: Atlantic Provinces Education Foundation, 2001.
British Columbia Ministry of Education. Technology Education8 to 10, Integrated Resource Package. Victoria, BC: BritishColumbia Ministry of Education, 1995.
Conference Board of Canada. About the Conference Board ofCanada. 2002. <www.conferenceboard.ca/who.htm>
4 Teachers Site. Homepage. <www.4teachers.org>.(24 May 2007).
Human Resources and Social Development Canada (HRSDC).“About Human Resources Development Canada. 2007.“<www.hrsdc.gc.ca/en/cs/comm/about_us.shtml>(25 May 2007).
Lazear, David. Seven Ways of Knowing: Teaching for MultipleIntelligences. Palatine, IL: IRI/SkyLight Training andPublishing, 1991.
Manitoba Education and Training. A Foundation for Excellence.New Directions series. Winnipeg, MB: ManitobaEducation and Training, 1995.
---. Keeping Your Facilities SAFE: A Support Document forIndustrial Arts Teachers. Winnipeg, MB: ManitobaEducation and Youth, 2003.
---. Middle Years Home Economics/Industrial Arts: LinkingLearning to Living. Winnipeg, MB: Manitoba Educationand Youth, 2003.
---. Senior 1 English Language Arts: A Foundation forImplementation. Winnipeg, MB: Manitoba Education andTraining, 1997.
---. Senior 4 Applied Technology (draft). Winnipeg, MB:Manitoba Education and Training, 1996.
---. Success for All Learners: A Handbook on DifferentiatingInstruction. Winnipeg, MB: Manitoba Education andTraining, 1996.
---. Subject Table Handbook: Technology Education: September2001–June 2002. Winnipeg, MB: Manitoba Education,Training and Youth, 2002.
National Life/Work Centre. Blueprint for Life/Work Designs.Memramcook, NB: National Training and SupportCentre Memramcook Institute, 2000.
Ontario Ministry of Education. Curriculum Guideline—BroadBased Technological Education Grades 10, 11, 12. Toronto,ON: Ontario Ministry of Education, 1995.
Rogers, S. Teaching Tips: 105 Ways to Increase Motivation andLearning. Evergreen, CO: Peak Learning Systems, 1999.
R E F E R E N C E S
S e n i o r Y e a r s I n d u s t r i a l A r t s : M a n i t o b a C u r r i c u l u m F r a m e w o r k o f O u t c o m e s150
Saskatchewan Education. Instructional Approaches: AFramework for Professional Practice. Regina, SK:Saskatchewan Education, 1991.
Saskatchewan Learning. Practical and Applied Arts Handbook.Regina SK, Saskatchewan Learning, 2002.
Sousa, 0. How the Brain Learns. Thousand Oaks, CA: CorwinPress. 1998.
Technology Educators’ Association of Manitoba Inc. IndustrialArts/Technology Education: K to Senior IV FrameworkPolicy. Winnipeg, MB: Technology Educators’Association of Manitoba Inc., 1998.
---. Technology Education Association of Manitoba Objectives foran Effective Technology Education Program. Winnipeg, MB:Technology Educators’ Association of Manitoba Inc,1999. <www.technologyeducators.mb.ca
Technology for All Americans. Standard for TechnologicalLiteracy: Content for the Study of Technology. Reston, VA:International Technology Education Association, 2000.
Tileston, OW. 10 Best Teaching Practices: How Brain Research,Learning Styles, and Standards Define TeachingCompetencies. Thousand Oaks, CA: Corwin Press Inc.,2000.
Urban Industrial Arts/Technology Education Council ofWinnipeg. Industrial Arts in Manitoba: A Position Paper.Winnipeg, MB: Urban Industrial Arts/TechnologyEducation Council of Winnipeg, 1999.
Western Michigan University. The Evaluation Center: TeacherEvaluation Glossary. Kalamazoo, MI: Western MichiganUniversity, 2004. Available online at<www.wmich.edu/evalctr/ess/glossary>.
Zemelman, S., D. Daniels, and A. Hyde. Best Practice: NewStandards for Teaching and Learning in America’s Schools.Portsmouth, NH: Heinemann, 1993.
Top Related