Flansch-Kugelhähne Typ KHF 510DN 15, 1/2˝ bis DN 350, 14˝ASME B 16.5 - 16.10
Werkstoffe: -ETE- -STE- -EPE- -SPE- Gehäuse 1.4408 1.0619 1.4408 1.0619 Dichtungen PTFE PTFE PEEK PEEK Kugel 1.4408 1.4308 1.4408 1.4308
DIN EN ISO 9001:2008 - TÜV CERT - DGRL 97/23/EGHerstellung gem. AD-2000TA-Luft 2002Fire-Safe API 607 Fifth Edition / ISO 10497-5:2004
Einsatzbereiche:Neutrale Gase und Flüssigkeiten,Mineralölprodukte, Laugen, Dampf,korrosive Flüssigkeiten und Gase.
Temperatur: -50 °C (-60 °F) bis +230 °C (450 °F). (PTFE) -50 °C (-60 °F) bis +260 °C (500 °F). (PEEK)
flanged-ball valves type KHF 510DN 15, 1/2˝ up to DN 350, 14˝ASME B 16.5 - 16.10
materials: -ETE- -STE- -EPE- -SPE- body 1.4408 1.0619 1.4408 1.0619 seats PTFE PTFE PEEK PEEK ball 1.4408 1.4308 1.4408 1.4308
DIN EN ISO 9001:2008 - TÜV CERT - PED 97/23/ECmanufacturing acc. to AD-2000TA-Luft 2002Fire-Safe API 607 Fifth Edition / ISO 10497-5:2004 Application:Water, oil, gas, acid, solution, solvent, steam.
Temperature: -50 °C (-60 °F) to +230 °C (450 °F). (PTFE) -50 °C (-60 °F) to +260 °C (500 °F). (PEEK)
1 QS
1 QS
ANSI Class150-300-600 lbsPTFE - PEEKSchwimmende Kugel
MADE
IN
Germany
®
- Armaturen® GmbH - Germany
PTFE - PEEKFloating ball
Armaturen®
Flansch-Kugelhähne Typ KHF 510 / flanged ball valves type KHF 510ANSI Class 150-300-600 lbsPTFE / PEEKDGRL 97/23/EG / PED 97/23/ECTA- Luft 2002Fire-Safe API 607, Fifth Edition, ISO 10497-5:2004DIN DVGW-Reg. -Nr. / No.
Antriebsaufbaunach DIN ISO 5211
actuator attachment
acc. to DIN ISO 5211
ISO 5211 Øk2 d6 threadlenght Ød5 o/Ø d4
F 05 50,0 4xM6 10,0 35,0 o48F 07 70,0 4xM8 12,0 55,0 o68F 10 102,0 4xM10 15,0 70,0 o96F 12 125,0 4xM12 18,0 85,0 Ø150F 14 140,0 4xM16 24,0 100,0 Ø175F 16 165,0 4xM20 30,0 130,0 Ø210F 25 254,0 8xM16 24,0 200,0 Ø285F 30 298,0 8xM20 30,0 230,0 Ø350
Option mit gestützter Kugel, Option with ball support
DN 6˝ bis DN 14˝ DN 6˝ to DN 14˝
Schwimmende Kugel Floating ball
DN 1/2˝ bis DN 14˝ DN 1/2˝ to DN 14˝
Flansch-Kugelhähne Typ KHF 510 / flanged ball valves type KHF 510ANSI Class 150-300-600 lbs
Armaturen
1 - nur bei gestützter Ausführung / only for ball supported design2 - empfohlene Ersatzteile / recommended spare parts3 - nur bei EPE und SPE / only for EPE and SPE
®
KHF 510 ETE STE EPE SPE55 Sechskantmutter Nut A2/304 A2/304 A2/304 A2/30454 Sechskantschraube Hex Bolt A2/304 A2/304 A2/304 A2/30450 Handhebel Handle 1.4308/CF8 1.4308/CF8 1.4308/CF8 1.4308/CF846 Sechskantschraube Hex Bolt A4-70/316 A2-70/304 A4-70/316 A2-70/30445 Gehäusedichtring 2 Body seal 2 PTFE PTFE Graphite Graphite413 Federelement 2 Spring element 2 - - Graphite Graphite39 Kugeldichtring 2 Ball seat 2 RPTFE RPTFE PEEK PEEK34 Sechskantschraube 1 Hex Bolt 1 A4-70/316 A2-70/304 A4-70/316 A2-70/30432 Dichtring Stützbolzen 1,2 Trunnion seal 1,2 PTFE PTFE Graphite Graphite30 Stützbolzen 1 Support trunnion 1 1.4401/316 1.4401/316 1.4401/316 1.4401/31623 Zylinderschraube Hex.-socket screw A2-70/304 A2-70/304 A2-70/304 A2-70/30422 Anschlagscheibe Stop disc 1.4301/304 1.4301/304 1.4301/304 1.4301/30421 Lager-band/buchse 2 Bearing band/bush 2 PTFE PTFE PEEK PEEK20 Zylinderschraube Hex.-socket screw A2-70/304 A2-70/304 A2-70/304 A2-70/30419 Deckel Cover 1.4408/CF8M 1.4408/CF8M 1.4408/CF8M 1.4408/CF8M18 Tellerfeder Cup spring 1.4310/1.4568 1.4310/1.4568 1.4310/1.4568 1.4310/1.4568
17.1 Druckstück Gland 1.4401/316 1.4401/316 1.4401/316 1.4401/31617 Druckring Ring 1.4401/316 1.4401/316 1.4401/316 1.4401/31616 Gleitring 2 Thrust ring 2 PTFE PTFE Graphite Graphite14 Sicherungsring Safety ring 1.4310/301 1.4310/301 1.4310/301 1.4310/301
12.1 Dichtring 2 Stem seal 2 PTFE PTFE Graphite Graphite12 Dichtring 2 Stem seal 2 PTFE PTFE Graphite Graphite11 Schaltwelle Stem 1.4401/316 1.4401/316 1.4401/316 1.4401/31610 Kugel Ball 1.4408/CF8M 1.4308/CF8 1.4408/CF8M 1.4308/CF82 Seitenteil Side cap 1.4408/CF8M 1.0619/WCB 1.4408/CF8M 1.0619/WCB1 Gehäuse Body 1.4408/CF8M 1.0619/WCB 1.4408/CF8M 1.0619/WCB
Pos/item Benennung Denomination Werkstoff / material
DN ØLw L L1 H h1 h2 Ød SW Ød3 H5 R Weight Kg ISO 5211
Class150300600
150 300 600 150 300 600 150300 600 150
300 600 150300 600 150
300 600 150300 600 150 300 600
150300600
150 300 600 150300 600
1/2˝ mm in
16,00,63
108,04,25
139,75,50
165,16,50
47,01,85
47,01,85
58,02,28
80,03,15
63,02,48
10,00,39
16,00,63
12,40,49
90,03,54
90,03,54
91,03,58
133,05,24
160,06,30 3,0 3,7 4,2 F 05
3/4˝ mm in
19,00,75
117,34,62
152,46,00
190,57,50
48,01,89
48,01,89
58,02,28
80,03,15
63,02,48
10,00,39
16,00,63
12,40,49
90,03,54
90,03,54
91,03,58
133,05,24
160,06,30 3,3 4,7 5,4 F 05
1˝ mm in
25,00,98
127,05,00
165,16,50
215,98,50
48,01,89
63,02,48
78,03,07
80,03,15
63,02,48
10,00,39
16,00,63
12,40,49
90,03,54
90,03,54
105,04,13
133,05,24
160,06,30 3,7 5,3 7,1 F 05
1 1/2˝ mm in
38,11,50
165,16,50
190,57,50
241,39,50
67,52,66
67,52,66
102,54,04
109,04,29
80,03,15
14,00,55
20,00,79
14,00,55
120,04,72
120,04,72
130,05,12
158,06,22
215,08,46 7,4 10,6 13,5 F 07
2˝ mm in
50,01,97
177,87,00
215,98,50
292,111,50
70,02,76
77,53,05
112,54,43
126,04,96
93,03,66
18,00,71
20,00,79
14,00,55
152,05,98
155,06,10
160,06,30
171,06,73
215,08,46 12,1 15,4 19,8 F 07
2 1/2˝ mm in
64,02,52
190,57,50
241,39,50
330,213,00
80,03,15
80,03,15
102,54,04
150,05,91
115,04,53
18,00,71
20,00,79
14,00,55
190,07,48
190,07,48
190,07,48
195,07,68
215,08,46 19,5 23,0 29,7 F 10
3˝ mm in
76,13,00
203,28,00
282,511,12
355,614,00
82,53,25
102,54,04
142,55,61
161,56,36
124,54,90
20,00,79
25,00,98
19,30,76
202,07,95
202,07,95
215,08,46
211,08,31
300,011,81 24,5 32,4 41,7 F 10
4˝ mm in
100,03,94
228,69,00
304,812,00
431,817,00
94,53,72
117,54,63
162,56,40
178,07,01
141,05,55
20,00,79
25,00,98
19,30,76
235,09,25
238,09,37
253,09,96
228,08,98
300,011,81 36,1 48,7 75,5 F 10
6˝ mm in
150,05,91
393,715,50
403,415,88
558,822,00
175,06,89
195,07,68
210,08,27
297,511,71
242,59,55
41,51,63
44,01,73
32,01,26
320,012,60
320,012,60
365,014,37
301,011,85
800,031,50 95,2 113,8 182,0 F 12
8˝ mm in
200,07,87
457,218,00
501,719,75
660,426,00
210,08,27
235,09,25
265,010,43
335,013,19
280,011,02
41,51,63
44,01,73
32,01,26
397,015,63
405,015,94
465,018,31
338,013,31
800,031,50 159,5 193,3 348,5 F 12 F 16
10˝ mm in
2509,84
533,421,00
568,522,38
787,431,00
245,09,65
275,010,83
310,012,20
390,015,35
401,015,79
330,012,99
337,013,27
51,02,01
58,02,28
48,01,89
70,02,76
36,01,42
52,02,05
487,019,17
505,019,88
540,021,26 - - 255,5 329,6 582,0 F 14
F 16 F 25
12˝ mm in
300,011,81
609,624,00
647,725,50
838,233,00
270,010,63
305,012,01
360,014,17
426,016,77
441,017,36
365,014,37
377,014,84
51,02,01
58,02,28
48,01,89
70,02,76
36,01,42
52,02,05
570,022,44
580,022,83
620,024,41 - - 361,8 456,9 766,0 F 14
F 16 F 25
14˝ mm in
350,013,78
685,827,00
762,030,00 - 340,0
13,39385,015,16 - 473,0
18,62 - 410,016,14 - 58,0
2,28 - 70,02,76 - 52,0
2,05 - 670,026,38
690,027,17 - - - 553,5 737,5 - F 25 -
© A
+R R
ev. 0
0 / 0
1.10
. de-
en
tech
n. Ä
nder
unge
n vo
rbeh
alte
n / t
echn
. cha
nges
rese
rved
A+R-Armaturen GmbHAltenhagener Str. 4aD-32107 Bad Salzuflen, GermanyTel. 49-5208-9102 0Fax 49-5208-9102 90 Email: [email protected]
A+R-Armaturen (Romania)400058 Cluj-Napoca, RomaniaTel. 40-364 410010Fax 40-364 410011 Email: [email protected]
A+R-Armaturen (China),Shanghai 201204, ChinaTel. 86-13901744069Email: [email protected]
A+R® Headquarters: Romania & Balkans: China
Vor MontageBefore tightening
Nach MontageAfter tightening
Allseitig gekammerte Mittelflanschdichtung aus PTFE oder Graphit. Montage mit definierter Vorspannung garantiert dauerhafte Dichtigkeit bei hoher Temperatur- und Druckbelastung oder schnellen Temperaturwechseln. Beide Mittelflanschteile auf metallischen Kraftschluss verschraubt.
Fully supported middle flange PTFE or Graphite sealing. Ensures absolute tightness by accurate preload of sealing between body and side cap during pressure and temperature service or thermal cycling. Middle flange of body and side cap were screwed on metal closure.
A+R® verwendet für RPTFE und PEEK-Kugelsitze eine ausgereifte Geometrie die bei Wärmeeinwirkung die erhebliche Volumenexpansion des Werkstoffes kompensiert.Es wird dadurch sichergestellt, dass das Drehmoment für die Betätigung, insbesondere durch Schwenkantriebe, konstant niedrig bleibt und ein Festsetzen der Kugel verhindert wird.
A+R® introduced a sophisticated ball seat geometry utilized to ensure that heat expansion of RPTFE and PEEK does not impact the ball functionality. It is guaranteed an operational integrity by constant torque which is very important for actuator use. The blocking of the ball is completely prevented.
Schaltwellenabdichtung mit Tellerfedern, vorgespannter PTFE oder Graphitpackung und doppelter Lagerung erreicht eine Helium-Leckrate von �10-8mbar.I.s-1..m-1 und erfüllt die TA-Luft 2002. Der Einbauraum der Tellerfedern ist vor Umwelteinflüssen geschützt und garantiert langlebige Funktionalität. Bis zu 500.000 Schaltungen werden ohne sichtbare Leckage erreicht.
PTFE or Graphite stem packing with live load and double bushing ensures a Helium tightness of �10-8mbar.I.s-1..m-1 and fulfils the TA-Clean Air 2002. The live load room is fully encapsulated from any negative environment impact and guarantees a long term functionality. Up to 500.000 quarter turns will be performed without visible leakage.
Handgetriebe Typ ARmanual worm gear Type AR
Schaltwellenverlängerung stem extension
Standard Verlängerungstandard stem extension
Option mit Mantelrohroption with support tube
É
É
Type A B C D E F G H K L M N O ISO 5211AR 1 122 112 69 38,5 30,5 195 200 2,5 55 38 102 M10 22 F 10AR 2 180 150 81 66,7 42 235 250 7,5 72 64,5 125 M12 27 F 12AR 3 217 198 93,5 89,5 50 285 457 8 81 90 140 M16 36 F 14AR 4 292 252 105,5 123 50 355 600 10 92 115 140 M16 36 F 14
wormgearType
Type KHFDN/NPS
DN 80NPS 3ʺ
DN 100NPS 4ʺ
DN 125NPS 5ʺ
DN 150NPS 6ʺ
DN 200NPS 8ʺ
DN 250NPS 10ʺ
DN 300NPS 12ʺ
DN 350NPS 14ʺ
ISO 5211 F 10 F 12 F 14 F 25AR 1 F 10 80 80 - - - - -AR 2 F 12 80 80
90 180AR 3 F 14 - 90AR 4 F 14
Verschließvorrichtung optional pad lock option
É
˝x˝ -- Brückenhöhe (Standard)/ dimension of bracket (standard)
* - andere Längen auf Anfrage/ other dimensions on request
www.ar-armaturen.com
DN 15 - 25
DN 40 - 65
DN 80 - 100
DN 150 - 200
DN 250 - 300
DN 350
NPS ½ʺ-1ʺ
NPS 1 ½ʺ- 2 ½ʺ
NPS 3ʺ- 4ʺ
NPS 6ʺ- 8ʺ
NPS 10ʺ- 12ʺ
NPS 14ʺ
L * 100 100 100 100 100 100Ød 16 20 25 44 48 70SW 12,4 14 19,3 32 36 52h2 10 18 20 42 50 55
Top Related