LTV™ 1200 vent i lator emergency set-up card
For 24-hour assistance, call 800.754.1914
AC adapter
(Use AC power when available).
SprintPack Lithium-Ion
Power System
Step 1: Choose a power source.
Step 2: Connect the LTV® 1200 ventilator to the power source.
• Open bag.
• Remove patient circuit and 22 mm adapter from bag.
Humidifier circuit (optional)
22 mm patient circuit, adult
>20 kg
>44 lb
22 mm adapter
To patient
Sense lines/To ventilator
To ventilator
15 mm patient circuit, infant/pediatric 5 kg to ≤ 20 kg 11 lb ≤ 44 lb
22 mm adapter
To patient
Sense lines/To ventilator
To ventilator
Step 3: Choose a circuit.
For 24-hour assistance, call 800.754.1914
Step 4: Connect the circuit to the LTV 1200 ventilator.
Attach 22 mm adapter
(found in circuit bag). Connect circuit to 22 mm adapter.
Filter optional
Turn clockwise.
Step 5: Connect the sense lines to the LTV 1200 ventilator.
On/Standby
Step 6: Turn on the LTV 1200 ventilator.
For 24-hour assistance, call 800.754.1914
Step 7: Patient setting displays.
Once the power is on, see Same Patient display.
Step 8: Change display to the New Patient setting.
Select
Rotate Set Value knob
clockwise until New
Patient is displayed.
Press Select when New Patient
is displayed.
Note: If you make a mistake, turn the LTV 1200 ventilator
off by holding the On/Standby button for three seconds.
Then return to Step 6.
Press Select when proper patient
size is displayed.
Step 9: Set patient size.
Select
Rotate Set Value
knob to correct patient
size (infant, pediatric or
adult).
For 24-hour assistance, call 800.754.1914
Step 10: Connect circuit to ET tube or mask.
ALARM notice: The LTV 1200 ventilator
will alarm until it is connected to the
patient. To turn it off, you may press the
Silence/Reset button.
Silence/
Reset
For 24-hour assistance, call 800.754.1914
ET tube Mask
Connect to patient.Connect elbow to mask.Choose a mask (pediatric or adult).
Step 11: Optional: Use a mask.
Pediatric Adult
Step 12: Optional: Use an HME and/or flextube as shown for patient comfort.
Flextube
HME
This emergency set-up card is intended to provide emergency
instructions for initial LTV 1200 ventilator set-up. The initial settings
may need to be adjusted based on the patient’s clinical condition.
For complete information regarding set-up and operation, refer to
the LTV 1200 ventilator operator’s manual.
For global distribution.
©2020 Vyaire. Vyaire, the Vyaire logo and all other trademarks or registered trademarks are property of Vyaire Medical, Inc., or one of its affiliates. Medical devices class IIa according to Medical Devices Directive 93/42/EEC. Please read the complete Instructions For Use that come with the devices or follow the instructions on the product labelling. VYR-GBL-2000138
1. The current legal manufacturer is Carefusion. The legal manufacturer will change to Vyaire Medical when Vyaire branded labels are released.
G L O B A L H E A D Q U A R T E R S
Vyai re Medica l , Inc.26125 North Riverwoods BlvdMettawa, I L 60045 USA
vyaire.com
EMERGO EUROPEPr insessegracht 202514 AP The HagueThe Nether lands
A U S T R A L I A N S P O N S O R
Vyai re Medica l Pt y LtdSu i te 5.03, B u i ld ing C1 1 Ta lavera RoadMacquar ie Park , NSW 21 13Aust ra l ia
Vya i re Medica l , Inc. 126125 North Riverwoods BlvdMettawa, I L 60045 USA
Top Related