Code Picture Description
Cargo Lashing Chain Cargo Lashing Chain • Purpose manufactured for securing loads
• Certificate of test & conformance supplied
• Can be supplied in any length
DO NOT :
• Use for towing purposes
• Use for lifting purposes
• Tie knots in the chain
LIFTING EQUIPMENT 2019
Cargo Control Products
CARGO CONTROL PRODUCTS
CARGO SECURING SYSTEMS CARGO SECURING SYSTEMS
Ratchet Tie Down, Ratchet Straps Ratchet Tie Down, Ratchet Straps
FEATURES
◦Double ply lifting sling made from high tenacity low elongation polyester fibres
◦Colour coded according to SABS – EN 1492 – 1
◦Temperature range of -40oC to 100oC
◦Available in any length
◦Eyes 50% reinforced with High Vis Anti-abrasion webbing (orange)
◦Tuff-tag label for traceability
◦Various capacities up to 100 Ton WLL
FLAT WEBBING AND ENDLESS ROUND SLINGS
We have a wide selection of lifting slings that are categorized according to construction and design. Our range includes; chain, nylon, webbing
and wire rope slings.
Polyester Duplex Flat Webbing Slings – Colour Coded
Polyester flat webbing slings offer good resistance to many acids. We have a wide range polyester flat webbing slings that are suitable for
various applications
High Strength, Lightweight Polyester Slings
◦Easy to handle – Light, flexible, soft
◦High strength – to – weight ratio
◦Ideal for delicate surfaces
◦Suitable for choker applications reduces WLL with 2%
◦Colour coded for quick capacity identification
◦Various capacities up to 900 ton WLL.
◦Wide range of lengths
◦Safe working load indicated on each sling
◦Tuff-tag label for traceability
Polyester Endless Round Slings – Colour Coded
SHORT LINK GR5 CHAIN
Grade 5 Short Link Chain is specially hardened and tempered to achieve higher working load
limits and increased wearing properties. Identification: Embossed 5 on at least every 20th link
or 1 metre, whichever is the lesser distance. Short Link Chain is a special steel chain developed
to those rugged applications demanding high resistance to both abrasion and shock loads.
SUPER 6 SHORT LINK CHAIN
Short Link Chain is ideally suited for Cane and Timber Bundling Chains and Load Lashing on
vehicles. Identification: Embossed SUPER 6 on at least every 20th link or 1 metre, whichever is
the lesser distance.
GRADE 95 SHORT LINK CHAIN
GRADE 90 SPECIAL LONG LINK CHAIN
Gr3 LONG LINK CHAIN
Long Link is a general purpose mild steel chain
Gr3 EXTRA LONG LINK CHAIN
ELL Chain was primarily developed for use in underground mining but now offers greater
versatility due to its “passing-through” design allowing immediate, on site, coupling and
repair.
LOAD CHAIN
For Manually operated Chain Hoists
Lifting chains are an integral part of any heavy lifting rig and are used in a multitude of different industries. These hoist chains are used for winches, hoist and the general handling
of materials. Rigging slings and lashings can also effectively make use of lifting chains. Positioning and lifting of large and heavy loads is a much easier task with a good quality
lifting chain. Industries like the automotive, printing, chemical, steel, paper, warehousing and distribution industries are some of the most prolific users of our hoisting chains. All
of our lifting chains go through stringent quality checks and are made from the finest materials to make sure they do their job and keep doing their job for a long time without
breaking. Below are some of the hoisting chains that we can provide to you:
LIFTING CHAIN
HARDWARE MID LINK CHAIN
Zinc-plated multi-purpose utility chain • Ideal for most D.I.Y. and general uses • Available in
sizes 3,0mm to 10,0mm • Supplied in measured 30m lengths CAUTION: DO NOT USE FOR
LIFTING
CROSBY FORGED MACHINERY EYE BOLTS
◦Forged steel eye bolts & eye nuts – quenched & tempered ◦Working load limit shown are for
in-line pull ◦Fatigue rated at 1 – 1/2 times the working load limit at 20 000 cycles
◦Crosby products meet or exceed all requirements of ASME B30.26 including identification,
ductility, design factor, proof load and temperature requirements. Importantly, Crosby
products meet other critical performance requirements including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26
◦Recommended for in-line pull
CROSBY FORGED EYE NUTS
◦Forged Steel – Quenched & Tempered. ◦Hot Dip galvanized. ◦Tapped with standard UNC class
2 threads after galvanizing. ◦Crosby products meet or exceed all requirements of ASME B30.26
including identification, ductility, design factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical performance equirements including fatigue
life, impact properties and material traceability, not addressed by ASME B30.26.◦ Also
available in blank (as forged) item (S-4028) or on request with metric threading (M-4028).
Crosby iP Vertical Lifting Clamps
Horizontal Plate Clamps◦Available in capacities of .75 thru 25 metric tons. ◦Wide variety of jaw openings available: 0
to 120mm. ◦ Welded alloy steel body for strength and smaller size. Forged alloy components,
where required. ◦Equipped with handle for easy placement. ◦ Individually Proof Tested to 2
times the Working Load Limit with certification. ◦Company name Crosby (IP), logo, Maximum
& Minimum Working Load Limit and jaw opening permanently stamped on body. ◦ Each
product is individually serialized, with the serial number and Proof Load test date stamped on
body. Serial number is included on the test certificate with maintenance and warranty
logbook. ◦Maintenance replacement kits are available. ◦Manufactured by a ISO 9001 facility.
◦All sizes are RFID EQUIPPED
◦Universal lifting in any direction ◦Vertical lifting, turning & transfer ◦Horizontal lifting ◦No damage to material ◦Transfer, lifting & stacking of steel beams ◦Lift, move & transfer 50-55 gallon drums with steel
tops
CROSBY PRODUCTS
Vertical Plate Clamps - For Vertical Lifting and Transfer
◦ Available in capacities of .5 thru 30 metric ton (Higher Working Load Limits are available
upon request.) ◦Wide variety of jaw openings available: 0 to 155mm. ◦Welded alloy steel body
for strength and smaller size. Forged alloy components, where required. ◦Individually Proof
Tested to 2 times the Working Load Limit with certification.
◦ Company name Crosby (IP), logo, Maximum & Minimum Working Load Limit and jaw
opening permanently stamped on body. ◦ Each product is individually serialized, with the
serial number and Proof Load test date stamped on body. Serial number is included on the
test certificate with maintenance and warranty logbook. ◦Available in variety of styles: ◦
IPU10 – Standard clamp for materials with a surface hardness to 37Rc (345HB). ◦ IPU10J –
Larger jaw opening. ◦ IPU10S – For use on stainless steel material.
◦ IPU10H – For use with materials with a surface hardness to 47Rc (450HB). ◦Full 180o
turning range for material transfer, turning or moving. ◦ Lock open, lock closed ability with
latch for pretension on material and then release connection between the clamp and hoist
hook. ◦ Optional IP-5000 Stinger assembly available. Allows for easy connection between the
clamp and hoist hook. ◦Minimum WLL of 10% of Maximum WLL. ◦Maintenance replacement
kits are available. ◦Manufactured by a ISO 9001 facility.
◦All sizes are RFID EQUIPPED
Vertical Plate Clamps - For use in almost all sectors of industry where
during the lift or transfer, no damage to the material is permitted ◦Available in capacities of .5, 1 and 2 metric tons. ◦Wide variety of jaw openings available: 0 to
38mm. ◦Welded alloy steel body for strength and smaller size. Forged alloy components,
where required. ◦Individually Proof Tested to 2 times the Working Load Limit with
certification. ◦Company name (CrosbyIP), logo, Working Load Limit and jaw opening
permanently stamped on body. ◦Each product is individually serialized, with the serial number
and Proof Load test date stamped on body. Serial number is included on the test certificate
with maintenance and warranty logbook. ◦Full 180° turning range for material transfer,
turning or moving. ◦Lock open, lock closed ability with latch for pretension on material and
then release of material. ◦Optional IP-5000 Stinger assembly available (see page 420). ◦Allows
for easy connection between the clamp and hoist hook. ◦Material must be clean and dry.
◦Maintenance replacement kits are available. ◦Manufactured by a ISO 9001 facility. ◦All sizes
are RFID EQUIPPED.
Horizontal Plate & Beam Clamps◦The IPBHZ beam clamp is used for horizontal lifting and transfer of steel beams. The base is
slotted to allow the clamps to be used from end of beams as well as from the flange. This
series of clamps can be used in the vertical and horizontal moving, transfer and stacking of
different types of structural designs, such as I-Beams, H-beams, angles, etc., depending on
the application desired.
Horizontal Plate & Beam Clamps◦ The IPBKZ beam clamp is used for lifting, transfer and stacking of H-Beams. An over-center
hoist eye allows for the beam flange to remain vertical. This series of clamps can be used in
the vertical and horizontal moving, transfer and stacking of different types of structural
designs, such as H-Beams, angles, etc., depending on the application desired.
Horizontal Plate & Beam Clamps
◦The IPVK drum clamp is for vertical lift and transfer. Automatically locks on drum, and can be
used alone or in pairs.
Horizontal Plate & Beam Clamps◦The IPU10/A automatically click on to the material as soon as the clamp is placed on the
plate.
The fact that the safety lock remains in position as the clamp closes precludes hazardous
situations. Fastening the IPU10/A clamp in places that are difficult to reach is no problem.
Crosby Wedge Sockets
CROSBY® US-422T Utility Wedge Sockets
◦Basket is cast steel and individually magnetic particle inspected. ◦Wedge socket terminations
have an efficiency rating of 80% based on the catalogue strength of XXIP wire rope. ◦Wedges
are color coded for easy identification. ◦Blue – largest wire line size for socket. ◦Black – mid
size wire line for socket. ◦11mm on US4 ◦14mm on US5 ◦Orange – smallest wire line size for
socket. ◦Cast into each wedge is the model number of the socket and the wire line size for
which the wedge is to be used. ◦Cast into each socket is the name “McKissick”, “Crosby” or
“CG”, its model number and its wire line range. ◦By simply changing out the wedge, each
socket can be utilized for various wire line sizes (Ensure correct wedge is used for wire rope
size). ◦ Load pin is forged and headed on one end. ◦US-422T wedge sockets contain a hammer
pad (lip) to assist in proper securement of termination. ◦Crosby products meet or exceed all
requirements of ASME B30.26 including identification, ductility, design factor, proof load and
temperature requirements. Importantly, these sockets meet other critical performance
requirements including fatigue life, impact properties and material traceability, not addressed
by ASME B30.26.◦UWO-422T Wedges are to be used only with the US-422 Wedge Socket
Assemblies.
CROSBY® S-421T Utility Wedge Sockets
◦Wedge socket terminations have an efficiency rating of 80% based on the catalogue strength
of XXIP wire rope. ◦Crosby products meet or exceed all requirements of ASME B30.26
including identification, ductility, design factor, proof load and temperature requirements.
Importantly, these products meet other critical performance requirements including fatigue
life, impact properties and material traceability, not addressed by ASME B30.26. ◦Basket is
cast steel and individually magnetic particle inspected.
◦Pin diameter and jaw opening allows wedge and socket to be used in conjunction with open
swage and spelter sockets. ◦Secures the tail or “dead end” of the wire rope to the wedge, thus
eliminates loss or “Punch out” of the wedge. ◦Eliminates the need for an extra piece of rope,
and is easily installed. ◦The TERMINATOR™ wedge eliminates the potential breaking off of the
tail due to fatigue. ◦The tail, which is secured by the base of the clip and wedge, is left
undeformed and available for reuse.
◦Incorporates Crosby’s patented QUIC-CHECK® “Go” and “No-Go” feature cast into the wedge.
The proper size rope is determined when the following criteria are met: Utilizes standard
Crosby Red-U-Bolt® wire rope clip.Standard S-421 wedge socket can be retrofitted with the
new style TERMINATOR™ wedge. The wire rope should pass thru the “GO” hole in the wedge.
The wire rope should NOT pass thru the “No-Go” hole in the wedge. ◦Available with Bolt, Nut,
and Cotter Pin. ◦U.S. Patent 5,553,360, Canada Patent 2,217,004 and foreign equivalents.
Crosby Lifting Shackles
CROSBY® SCREW PIN SHACKLES◦Capacities 1/3 through 55 metric tons. ◦Forged – Quenched and Tempered, with alloy pins. ◦
Working Load Limit and grade of material “6” permanently shown on every shackle. ◦Hot Dip
galvanized or Self Coloured. ◦Fatigue rated. ◦ Shackles can be furnished proof tested with
certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges
for proof testing and certification available when requested at the time of order. ◦ Shackles
are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20oC. ◦
Sizes 1/2t – 25t meet the performance requirements of EN13889:2003. ◦ Crosby products
meet or exceed all requirements of ASME B30.26 including identification, ductility, design
factor, proof load and temperature requirements. Importantly, Crosby products meet other
critical performance requirements including fatigue life, impact properties and material
traceability, not addressed by ASME B30.26. ◦ Look for the Red Pin®…. the mark of genuine
Crosby quality.
CROSBY® BOLT TYPE SHACKLES◦Working Load Limit permanently shown on every shackle. ◦Capacities 1/3 thru 150 metric
tons. ◦Forged – Quenched and Tempered, with alloy pins. ◦Hot Dip galvanized or Self Colored.
◦Fatigue rated. ◦ Crosby products meet or exceed all requirements of ASME B30.26 including
identification, ductility, design factor, proof load and temperature requirements. Importantly,
Crosby products meet other critical performance requirements including fatigue life, impact
properties and material traceability, not addressed by ASME B30.26. ◦ Sizes 1/2t – 25t meet
the performance requirements of EN13889:2003. ◦ Shackles 55 metric tons and smaller can be
furnished proof tested with other certification when requested at time of order. ◦Shackles 85
metric tons and larger can be provided as follows. ◦Non Destructive Tested ◦Serialized Pin and
Bow ◦Material Certification (Chemical) must be requested at time of order. ◦Look for the Red
Pin®…. the mark of genuine Crosby quality.
CROSBY® WIDE BODY SHACKLES◦All sizes Quenched and Tempered for maximum strength. ◦Forged alloy steel from 7 through
300 metric tons. ◦Cast alloy steel from 400 through 1550 metric tons.
◦ Sizes 300 metric tons and smaller are proof tested to 2 times the Working Load Limit. ◦Sizes
400 metric tons and larger are tested to 1.33 times Working Load Limit. ◦All ratings are in
metric tons, embossed on side of bow. ◦G-2160, (7-55t), are Hot Dip Galvanized and pins are
painted red. ◦ G-2160, (75t and larger), bows are furnished Dimetcoted, and pins are
Dimetcoted, then painted red. ◦S-2160 bows and pins are painted red. ◦Shackles, 30t and
larger, are RFID EQUIPPED. ◦ Can be used to connect HIGH STRENGTH Synthetic Web Slings,
HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings. ◦Increase in shackle bow radius
provides minimum 58% gain in sling bearing surface and eliminates need for a thimble. ◦
Increases usable sling strength minimum of 15% and greatly improves life of wire rope slings.
◦Pin is non-rotating, with weld-on handles for easier use (75t and larger). ◦Approved for use at
-40 degree C (-40 degree F) to 204 degree C (400 degree F). ◦ Bow and bolt are Certified to
meet charpy impact testing of 42 joules (31 ft-lbs.) min. ave. at -20 degree C (-4 degree F). ◦All
2160 shackles are individually proof tested and magnetic particle inspected. ◦Crosby
certification available at time of order.
◦ Shackles requiring ABS, Lloyds and other certifications are available upon special request and
must be specified at time of order. ◦ Shackles 18t and larger have DNV Type Approval to Rules
for Certification of Lifting Appliances, and are produced in accordance with DNV MSA
requirements. Databook is provided that includes required documents.
◦ Serialization / Identification ◦ Material Testing (Physical / Chemical /Charpy) ◦ Proof
Testing ◦Look for the Red Pin® …the mark of the genuine Crosby quality.
COMMERCIAL SHACKLES & WIRE ROPE CLAMPSWe offer a range of wire rope clamps that offer efficient results depending on the breaking
strength of the wire rope. Our wire rope clamps are suitable for all your requirements.
• NOT FOR LIFTING APPLICATIONS •◦ LARGE DEE SHACKLES ◦ COMMERCIAL DEE-SHACKLES ◦ WIRE ROPE
CLAMPS
Crosby National Steel Swaging SleevesCROSBY National Steel Swaging Sleeves - S-505
COLD TUFF
Standard Steel Sleeves ◦For flemish eye wire rope splicing ◦Designed for low temperature toughness ◦Resists cracking
when swaged (equals or exceeds stainless steel sleeves) ◦Special processed low carbon steel
◦“COLD TUFF”® for better swageability
Crosby ThimblesSOLID WIRE ROPE THIMBLES
◦Cast ductile iron ◦Fits pin for open wire rope socket, boom pendant clevis and wedge socket
EXTRA HEAVY WIRE
ROPE THIMBLES◦Available in Hot Dip galvanized or Stainless Steel (Type 304) ◦Meets the performance
requirements of EN13411-1:2002 ◦Stainless steel recommended for more corrosive
environments where greater protection is required. ◦Greater protection against wear and
deformation of the wire rope eye. ◦Longer service life.
CROSBY Sockets For Steel Wire Ropes – G-416 / G-147 CROSBY Open Spelter Sockets
◦Forged Steel Sockets thru 38mm, cast alloy steel 40 mm thru 100mm. ◦Spelter socket
terminations have an efficiency rating of 100%, based on the catalog strength of wire rope.
Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 36, IPS or XIP (EIP), XXIP
(EEIP), RRL, FC, or IWRC wire rope. NOTICE: All cast steel sockets 40mm and larger are
magnetic particle inspected and ultrasonic inspected. Proof testing available on special order.
Drawing illustrates one groove used on sockets 6mm thru 19mm. Sizes 22mm thru 38mm use
2 grooves. Sizes 40mm and larger use 3 grooves.
CROSBY Closed Spelter Sockets◦Forged Steel Sockets thru 38mm, cast alloy steel 40 mm thru 100mm. ◦Spelter socket
terminations have an efficiency rating of 100%, based on the catalog strength of wire rope.
Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 36, IPS or XIP (EIP), XXIP
(EEIP), RRL, FC or IWRC wire rope. NOTICE: All cast steel sockets 40 mm and larger are
magnetic particle inspected and ultrasonic inspected. Proof testing available on special order.
Drawing illustrates one groove used on sockets 6 mm thru 19 mm. Sizes 22 mm thru 38 mm
use 2 grooves. Sizes 40 mm and larger use 3 grooves.
CROSBY WIRELOCK®
Resin Kits◦WIRELOCK® is designed to gel in approximately 15 minutes at 18°C ◦WIRELOCK® Wire Rope
Assemblies are 100% efficient when used with steel wire rope, galvanized wire ropes and
stainless steel wire ropes. We do not advise the use of stainless steel wire rope in a salt water
marine environment without regular inspection.
CROSBY Platinum Line Premium Chain Fittings : Incorporating all the below :-
Contact us for the PDF showing this range in more detail
Crosby Grade 8/10 Chain System · "The Platinum Line"
Crosby Grade 8/ 10 Chain System · The QUIG-CHECK® System
Crosby Hooks
Crosby ELIMINATOR® System
Chain Sling Components
Crosby Grade 100 Chain Sling Components
Grade 100 Alloy Chain
Welded Master Links
Crosby ELIMINATOR Fittings
Crosby Grade 100 Chain Fitting
Crosby Grade 100 Grab Hooks
Crosby Grade 100 SHUR-LOC® Hooks.
Crosby Grade 100 SHUR-LOC® Swivel Hooks
Crosby Grade 100 Sling & Foundry Hooks
Crosby Grade 100 Choker Hook & Reeving Link
Replacement Kits
Grade 80 Alloy Chain
Grade 80 Assembly Chart
Welded Master Links
Alloy Fittings Application & Information
Warning & Application Information
Dillon Load Cells
ED X TREME Dynamometer
The EDXtreme offers trademark Dillon resolution, application versatility and options.
This flexible dynometer can serve as a simple hanging scale or be part of a
sophisticated weighing system.
ADjunior Dynamometer
When the job calls for a reliable instrument to take basic, consistent measurements
of weight and force, the affordable EDjunior delivers.
AP Dynamometer
The model AP is proven for guy wire & cable tensioning, bridge cable installation and
field testing chain, rope and wire. This rugged instrument provides precision force
and tension measurements to a wide range of industries.
Dillon is the world leader in dynamometers with the most comprehensive product & capacity offering, quick deliveries and quality pre-calibrated equipment that is ready to work
right out of the box.
The dynamometer is a portable, self-contained scale that measures the load applied between two shackles. The versatile dynamometer is often used to measure weight of
suspended loads or tension in wires and cables. Common for use with any type of crane, utilities, tower erection and general load testing.
Electric Chain Hoists
KITO® ER2 – SINGLE SPEED
(WITH HOOK SUSPENSION)
Five meters of power supply cable as standard accompanies. ◦ Optional length of lift,
push button cord and power supply cable besides standard is available on your
request.
◦Extending the load chain is prohibited with additional links.◦ Steel chain containers
are available if your lift is more than capacity of the standard container volume.
KITO® ER2 – DUAL SPEED – INVERTER
(WITH HOOK SUSPENSION)
◦Five meters of power supply cable as standard accompanies. ◦ Optional length of
lift, push button cord and power supply cable besides standard is available on your
request.
◦ Extending the load chain is prohibited with additional links. ◦ Steel chain containers
are available as option if your lift is more than capacity of the standard container
volume.
KITO® ER2M – SINGLE LIFTING
(SINGLE TRAVERSING SPEED
WITH MOTORIZED TROLLEY)
◦Ten meters of power supply cable as standard accompanies. ◦ Optional length of
lift, push button cord and power supply cable be sides standard is available on
your request. ◦ Extending the load chain is prohibited with additional links. ◦ Steel
chain containers are available as option if your lift is more than capacity of the
standard container volume. ◦ Single Lifting – Dual Traversing is also available.
Black bear 5 TON LOW HEADROOM
WITH MOTORIZED TROLLEY
◦Standard lifting height: 3m ◦ Optional height available upon request (may be
charged extra according to load chain length)
LIFTING HARDWARE
KITO® Manual Chain Hoists
◦KITO® Manual Chain Hoists ◦Any lift of chain is available upon request.◦As Kito chains are heat treated, splicing of the load chain is
prohibited.◦When ordering, specify lifting height.◦Chain Falls varies on each capacity.◦Overload limiters available upon request.
KITO® Manual Lever Hoists
Our range of manual lever hoist is manufactured from pressed steel, increasing it durability properties. This product is ideal for all your various
lifting applications.
The load-lifting height can be set according to the user’s application. However, no addition to the chain to increase the length is possible as Kito chains are heat treated.
◦When ordering, specify the length of chain in advance or consult your local Kito distributor.
◦Lever Blocks with Kito Load signal (overload detection unit) are also available.
◦The mass (Net weight) is for the standard load-lifting height.
◦All models are available with Load Indicators or Overload Limiters upon request
Tirfor Lifting & Pulling Machines
More than 30 years of manufacturing experience is behind the TU-TIRFOR range of lifting
and pulling machines. Available in four sizes – 800kg to 4000kg – they offer portability,
safety and precision.
The unique rectilinear operation enables the machines to operate in any direction and for
any height of lift or length of pull. Lifting and pulling power can also be increased with the
use of sheave blocks.
◦ Tirfor hoists have two ‘U’ shaped jaw blocks which preserve the cylindrical form of the
wire rope to ensure there is no deformation and very little wear of the rope
◦ The Tirfor system provides high mechanical efficiency which ensures ease of operation and
longer service life
◦ Accidental release is precluded and the self-gripping action of the jaws is maximised
Tirfors are used in applications across industry, including civil engineering, construction,
mining, pipe laying, shipbuilding, agriculture and forestry.
ADJUSTABLE BEAM CRAWLS PDF Data Sheets available on request
Customer to specify the required lift and hand chain when ordereing geared
crawls
THREADED ADJUSTABLE BEAM CRAWLS
LH/RH Threaded single cross head Locking Bush. Free swinging hook plate. Anti tips
pins. Adjustable riggers crawl up to 300mm wide beam
TIRFOR ROPES ARE MANUFACTURED TO SUIT YOUR APPLICATION, SPECIFY LENGTH & END FITTING REQUIRED.
We offer a wide selection of Tirfor machines that can be utilized to lift, and pull loads over a distance depending on the wire rope length.
LIFTING HARDWARE ACCESSORIES
RIGGERS ADJUSTABLE BEAM CRAWLS
Rigger crawl with scissors type cross piece, screw adjusted and lock bush suitable
beam size 300mm
ADJUSTABLE GIRDER CLAMPS
MONORAIL CONSTRUCTION CLAMP
Natural Or Synthetic Fibre Ropes
Technical Specifications PDF available on request
Max-Alloy Chain AssembliesMASTER LINKS
MAX ALLOY Grade 8 OBLONG
MASTER LINKS : For Single and
Two Leg Chain Slings
Various sizes available - contact us for full range
MAX ALLOY Grade 8 OBLONG
MASTER LINK
SUB-ASSEMBLIES: For three
and Four Leg Chain Slings
Various sizes available - contact us for full range
MAX ALLOY Grade 8
ENLARGED OBLONG
MASTER LINKS : for
single & two leg
chain slings
Various sizes available - contact us for full range
MAX ALLOY Grade 8 ENLARGED
OBLONG MASTER LINK
SUB-ASSEMBLIES : for three &
four leg chain slings
Various sizes available - contact us for full range
MAX ALLOY Grade 8 WELDED
COUPLING LINKS : for use in
place of Max-a-loks on factory
welded slingsVarious sizes available - contact us for full range
ALLOY CHAIN, CONNECTING LINKS & FOUNDRY HOOKS
MAX-ALLOY Grade 8 ALLOY CHAIN
The complete range of MAX-Alloy Chain is manufactured in South Africa from local high
quality steel. All the sizes from 6,0m to 32,0mm are manufactured to Grade 8 Quality with a
mean stress of 800 MPa at specified minimum breaking force.
MAX-Alloy is heat-treated alloy steel chain specifically developed and manufactured for use in
chain slings for lifting purposes. Possessing superior properties and high tensile strength, it is
also used in many other applications requiring highest quality chains.
In compliance with South African legislation pertaining to safe usage of lifting gear, working
load limits applicable to MAX-Alloy Chain and Fittings are rated at a Factor of Safety of 4:1.
The working load limits must not be exceeded. WLL: the Working Load Limits detailed in the
above apply only to MAX-Alloy Gr8 Chain embossed “MA8” as illustrated above.
Grade 10 CONNECTING LINK, Grade 8 EYE-TYPE FOUNDRY HOOK, Grade 8 EYE-TYPE
FOUNDRY HOOK WITH HANDLE - Various sizes available
ALLOY GRAB HOOK &
SHORTENING CLUTCH Grade 10 EYE GRAB HOOK
Grade 10 EYE GRAB HOOK
Grade 8 SHORTENING CLUTCH
ALLOY CLEVIS SELF-LOCKING HOOKS & CLEVIS MASTER LINKGrade 10 EYE SELF LOCKING HOOK
Grade 10 CLEVIS SELF LOCKING HOOK
Grade 8 CLEVIS MASTER LINK – CODE “YG”
ALLOY SLING HOOKS & CLEVIS SHACKLEGrade 10 EYE SLING HOOK – WITH LATCH
Grade 10 CLEVIS SLING HOOK – WITH LATCH
Grade 8 CLEVIS SHACKLE
SWIVEL SELF-LOCKING HOOKS, SELF-LOCKING SHANK HOOKS, UTILITY
WELD-ON HOOKS, WELD-ON LIFTING POINT Grade 10 SWIVEL SELF LOCKING HOOK – WITH BRASS BUSHING
Grade 8 SHANK SELF LOCKING HOOK
Alloy EXCAVATOR WELD-ON HOOK
Grade 8 WELD-ON LIFTING POINT
Manual WinchesMANUAL CABLE HOIST
HAND WINCHES
Our range of Hand winches are suitable for lowering loads and conveyor
tensioning. Manufactured from alloy steel and consists of superior safety
features. Various sizes availble. Ask us for the range
RIGGING HARDWARE
PLUMBOB WINCHSHAFT SINKING PLUMBOB WINCH
Included in our range of products is Winch plum bob which is available in an
extensive selection whether power operated or mechanically
Model : WINCHPBP1800 - SWL 40kg
Model : WINCHPBP3000
- SWL 60Kg
FAIL SAFE HEAVY DUTY PLUMBOB WINCH
DESCRIPTION AND SPECIFICATIONS:
Totally enclosed self sustaining worm drive.
Drive shafts supported by bearings, foot operated
Manual band brake, base mounted, dual handles, rugged construction
WINCH FEATURES : Winches are coated with an oven cured epoxy that outlasts a conventional finish. It provides an extremely tough, durable finish
with resistance to rust, salt, spray chemical erosion, general weathering, abrasion and impact. These winches are part of a complete range designed
for agricultural and light duty applications. These models have large 50mm diameter drums to allow cable to wrap evenly without kinking. NB :
Winches are supplied without rope or hooks. Steel wire rope, hooks and other fittings are available on request. Hand winches are intended for
transfer and hoisting of dead loads only. They are not be used for hoisting or transfer of people or hoisting loads over people. Winches are not
designed to secure boats to trailers during towing. Boat tie downs should be used.
GENERAL INFORMATION:
Winch is fitted with a safety ratchet operated brake which automatically locks the drum to hold the load at all times.
The load position can be adjusted up or down by simply winding the handle in the required direction. The load movement stops with the winding.
USES:
Ideal for Plumbob lowering in sinking
applications.
We also supply Plumbobs, stainless steel Plumbob wire and sheaves
HEAVY DUTY TURNBUCKLE
Above and below ground the SALVA VIDA Turnbuckle has proved to have major advantages over similar products in cost saving downtime. Through innovative design the
turnbuckle features enclosed moving parts within a solid body, which prevents the turnbuckle from seizing even in the toughest conditions
The design of the turnbuckle ensures unlimited applications, including:
◦ Installation and alignment of bulky concrete shuttering;
◦ Releasing of shuttering from set concrete;
◦ Installation and alignment of heavy engineering equipment
◦ Securing heavy loads
Bridon High Performance Crane Rope
BRIDON ROPE PRODUCT SELECTION
Bridon International are the world leaders in the manufacturing of wire rope for some of the most demanding industries in existence. Their
unrivaled experience and attention to detail allow Bridon to keep ahead of the curve and produce some of the most cutting edge wire rope
products around.
The Endurance Wire Rope range from Bridon offer High strength rope that are both rotation resist and extensively tested. They also have superior
resistance to bending, crushing and abrasion. This is thanks to the wire ropes compactness and robustness of its individual Dyform strands. If you
want even more longevity then you can opt for the plastic coating of IWRC to further extend the wire ropes lifespan.
Shutterlock offer an extensive range of Bridon crane rope that are suitable for a wide selection of applications. Take a look at the attached file
below for the products’ specifications.
STEEL WIRE ROPE
Steel Wire Rope
Stainless Steel Wire Rope
We offer a wide range of wire ropes that are manufactured with durable materials. This makes it the ideal product for all your industrial needs.
Shutterlock offers durable steel wire rope that is suitable for various applications. This includes container cranes, tower cranes, telescopic cranes,
mobile lattice boom cranes and more
Steel wire ropes are ideal for any outdoor environment. They consist of strong properties that enable its strength and length to remain constant
when wet or dry.
Steel Wire Rope Raise Bore Sling Steel wire rope sling 3.24 Ton, soft eye one end & 38mm Expansion shell fitted to other end
Available in 1.8M & 3 M configurations
Use: In underground mining where there is a requirement to lift a load in a haulage where
there is no lifting point available
The sling can be used individually or in a cluster dependent on the size of load to be lifted
Note: The ground conditions will dictate the Safe Working Load, as the sling was tested in
ideal circumstances in a test bench
Steel Wire Rope Accessories
Splices Types Of Splices Available
SUPERLOOP
• Flemish Eye with tapered steel ferrule • Very efficient • Robust steel ferrule •
Tapered steel ferrule to prevent snagging • No galvanic action between rope and
ferrule
• Recommended also for fiery coal mines – does not have low temp spark
AFGRIP
• Turnback Eye with aluminium ferrule
• Economic and efficient
HAND SPLICE
• Standard Liverpool or Admiralty methods
• Other special hand splices available
• Cable laid and grommet slings available on request
TAPERED ENDS
• Useful for reeving steel wire rope through systems, for tirfors, for fitting wedge sockets,
etc.
• Eliminates seizing of steel rope
Aluminium Ferrules
Talurit Aluminium Wire Rope FerrulesVarious sizes available
Vertical Drum Clamp
◦ This clamp is designed for the loading and unloading of steel drums in a vertical
position during the lifting operation.
◦WLL: 300kg
◦Identical clamp fitted with locking device
Horizontal Drum Clamp
◦This clamp is designed for horizontal transportation of steel drums
◦The lifting clamp is locked in the open position, the clamp is closed by pulling the
lever upwards
Vertical Drum Clamp – Twin Grip
◦This clamp is designed to lift open top steel drums
◦WLL: 500 Kg
◦WLL: 1000 Kg
Drum Decanting Device (210 l Drum) – Suitable for Crane and Forklift
◦ This device is designed for the decanting of chemicals, petroleum products,
lubricant etc. – WLL 300 Kg
◦If utilised by a crane, the handle becomes a hand chain wheel driven by a hand
chain
◦A heavy duty option is available for the decanting of steel balls (grinding media)
◦WLL: 2 000 Kg
Vertical / Horizontal Drum Lifter (Steel)
◦ This device is designed to lift steel drums with removable lids in the vertical and
horizontal position
◦WLL: 1 000kg
Drum Handling Equipment
Trawling ChainTrawling Chain
◦Specialized heat treatment procedure ensures high strength and maximum
toughness.
◦Improved wear resistance for prolonged use.
◦Extensive testing during and after manufacture.
◦ISO 9001/2000 Listing LS0060
Trawlink TM ◦Grade 8 TRAWLINK TM
◦New Design Sleeve & Spring Assembly
◦Hot Dipped Galvanized
◦Individually proof Tested
Whip Checks & Cable SocksSalva-Vida Whip Check Safety Sling
Description: A pressurised air hose, could cause the hose assembly to whip with extreme force due to the sudden release of energy, in the case of hose failure or
accidental uncoupling. In the event of the hose whipping, a situation can be lethal and could cause a potentially dangerous situation. To prevent such a situation
from occurring, a whip check (Air Hose Safety Cable), has been designed to ensure the safety of workers, prevent injury and possible infrastructure damage.
Salva-Vida Whip Check Sock Sling
The Salva-Vida high-pressure hose safety device.
Designed for pulling light to medium cables.
Note : The harder you pull, the tighter it grips.
Custom sizes can be manufactured on request.
These are the best high-pressure hose restraints available because the stocking style
woven steel grips the hose more securely over a larger area.
Wear and tear usually take place near fittings, which may result in a rupture. If
rapture happens within the covered area, additional safety occurs that would never
occur with a standard whip check, the woven steel can also help prevent abrasion to
the hose underneath.
These Whip socks can also be used on any application where high-pressure hoses
are used, air, water, hydraulic, slurry, etc. The key is the two mounting points and
the long gripping area. The two anchoring points and shackles must be rated for the
application.
Standard whip checks allow a great amount of whip to occur, but the dual leg Whip
sock keeps the hose under complete control. This could mean the difference
between life and death.
Our Cable socks are manufactured from galvanished steel and are available in a variety of styles. As a result this makes it the efficient piece of equipment for pulling
cables in trenches and buildings.
Wirelock ResinThere are five main areas in which Wirelock® is the preferred socketing medium:
General Engineering : Uses are extremely varied and include crane ropes, boom pendants,
winches, lifting straps and mast stays. Wirelock should always be used when socketing P.F.V.
ropes as the use of a molten metal will melt and vapourise the polymer in the valleys of the
rope.
◦Structures : These are generally long term applications such as suspended roofs for stadia,
aircraft hangers and other diverse structures.
◦Bridges
◦Mining : Wirelock is the only socketing medium that is currently approved in the UK for both
man and materials winding. It is extensively used for the same purposes in the gold mines of
South Africa and mines in both Australia and Canada.
* Offshore : Wirelock is the preferred socketing medium for offshore mooring systems
worldwide. Moreover, it is the only socketing system that meets the requirements of D.N.V.’s
Certification Notes No. 2.5 “Certification of Mooring Steel Wire Ropes” May 1995. It has both
Lloyds approval and ABS type Approval.
The shelf life of WIRELOCK® is eighteen (18) months (check label before use) from the date of
manufacture.
Corner Protection
Hinged edge-protector for chain & steel wire rope Hinged edge protector for chain & steel wire rope – 10mm
The attachment chain may only be used as an attachment accessory without edge protection
if a 20% reduction in load lifting capacity is taken into consideration or if the next-largest
chain thickness is used.
A “sharp edge” exists when the edge radius is smaller than the nominal thickness of the lifting
chain. Further information is available in the “sharp edge“ chapter.
Advantages
◦The chain slides through the clip
◦Adapts optimally to the load geometry
◦Does not fall off the chain even when knocked
Salva-Vida Urethane Corner Protection
The Salva-Vida corner protection range made of high quality polyurethane for the Steel Fabrication, Transport and Industrial Sectors and all Allied Industries.
The unit(s) protect all painted, galvanised, stainless steel and aluminium from scuffing and scratching.
The unit(s) prolong the life of lifting and load-securing equipment; i.e. Webbing Slings, Chain Slings & Steel Wire Rope Slings.
Hinged edge-protector for lashing belts & flat webbing
Corner edge-protector for lashing belts & flat webbing
Hinged edge protectors for lashing belts & flat webbing
Solid
By means of a hinge, the edge protector can be optimally suited to fit any load geometry. It
can be optionally equipped with magnets to better retain its position on the magnetic load.
The edge protector can be quickly secured to the edge of the lashing belt by means of
mounting slits. The lashing belt slides through the clip which remains on the lashing belt
despite collisions.
Optionally available:
Magnets for easy fixation of the magnetic load
Advantages
◦The lifting strap slides through the Clip
◦Optimally adapts to the load geometry
◦Remains on the lifting strap even if it is knocked off
as an Option: Magnets for simple attachment to magnetic loads
Edge protector for lifting straps & flat webbing with magnets
If the load has sharp edges or has a rough outer surface, a suitable abrasion or edge protector
must be used. Edge-protectors are easy and versatile to use.
The extremely robust edge-protectors protect the load and the lashing belts. They increase
the radius of the edge and prevent “sharp edges”.
The corner edge-protector for lashing belts considerably increases the radius on the corners.
It is particularly robust and durable thanks to the perforated-plate reinforcement. An optional
magnetic version can be easily attached to the magnetic load.
Advantages
Reinforced with perforated steel sheets
Extremely sturdy
Protects the lifting strap and load at the edges
Optionally available for: Magnets for simple mounting on magnetic loads.
Brilube Wire Rope Dressing
Ropes are like any other machine and to achieve maximum operating life in service
lubrication must be applied.
The type of service lubricant and frequency of application varies with the rope
construction the operating conditions
and its functional application.
Bridon’s unequalled experience in the world of wire rope manufacture and many
years spent in the development of specialist in service lubricants have been used in
the formulation of the Brilube range of products.
Brilube’s advanced formulation with proven performance helps to get the best from
your rope.
Brilube 30, 40 and 50 can be applied by brush, drip feed or portable pressurised
sprayer.
Brilube 60, 70 and 90 can be pressure applied using in-line application systems
which are available to suit a wide range of rope sizes and constructions. These
systems operate by forcing the lubricant into the rope under high pressure, whilst
simultaneously cleaning the rope and removing the moisture, residual lubricant and
contaminants.
◦Advanced corrosion protection
◦High lubricity
◦Reduced fling off
◦Enhanced rope life
◦Effective penetration
◦Easy application
Top Related