LED STREET LIGHT
• 150-watt and 300-watt shoe box, up to
80% energy saving.
• IP65 water-resistance design.
• Type III light distribution design.
• Wide range input design, 100~277 VAC.
• Environmental friendly, no lead, no
mercury.
• Long lifespan, up to 50,000 hours.
• Slip-fitter*, fast & easy installation.
• UL (), DLC Premium. *Optional: Straight Arm Bracket Square/Round, Trunnion Bracket
Product Specification
Item NO. CCT Voltage Wattage Lumen Luminous Efficiency
Beam Angle
ST150-D-PC-MS-5000K
(SB2-150-AW-50K-D30)
5000K 100~277VAC 150W 19500 lm 130 lm/W Type III
ST300-D-PC-MS-5000K
(SB2-300-AW-50K-D30)
5000K 100~277VAC 300W 39000 lm 130 lm/W Type III
Other Technical Data 150W 300W
Input Voltage 100~277 VAC
Input Frequency 50/60 Hz
Input Current (@120VAC) 1.8 A 3.5 A
Wattage 150W ± 2W 300W ± 4W
CRI ≥80 Ra
Beam Angle Type III
Power Factor ≥0.9
Materials Die-casting Aluminum & PC cover
Working Humidity 25~90 %RH
Working Temp. -25°C~+40°C
IP Rating IP65
Anti-power Rating Class II
LED Chip 2835
LED Quantity 256 pcs 256 pcs
Base Hard wiring
Dimming 0-10V Dimming (10% ~ 100%)
Light Distribution
Product Dimensions (in mm/inch)
150W 300W
Dimensions with slip-fitter.
Add-ons (sold separately)
(1) Photocell Sensor
Twist & Lock quick mount Photocell Sensor:
a) Auto switch on when ambient brightness is 10 LUX or less for 15~120 seconds;
b) Auto switch off when ambient brightness is 60 LUX or over for 2~15 seconds.
To disable it, twist and unmount Photocell Sensor, and mount Shorting Cap instead.
(2) Motion Sensor (with remote)
Motion activated switch with remote controller.
Motion Sensor
Load Limit 600W @120VAC / 1200W @277VAC
HF Frequency 5.8GHz (CW)
Dimming 0-10V Dimming (10% ~ 100%)
Time Setting 10 sec. ~ 30 min. (adjustable)
Brightness Control 10 ~ 2000 Lux (adjustable)
Detection Radius/Angle Max 26 ft. / 360°
Mounting Height Max 50 ft.
Working Humidity 25~95 %RH
Working Temp. -25°C~+70°C
IP Rating IP65 outdoor rated
Remote Controller
Mounting Kit
Slip-fitter Kit (included)
Straight Arm for Square pole or round pole
(sold separatly)
Trunnion for Wall (sold separatly)
Wiring
Risk of electric shock! Install and service by licensed electricians only.
(1) Regular / Photocell Sensor:
For non-dimming connect “L (black)”, “N (white)”, and “GND (green)” to 100~277VAC lines
accordingly. Insulate “DC+ (red)”, “DC- (blue)” separately and leave them open.
For dimming, connect “DC+ (red)” to “dim+”, and “DC- (blue)” to “dim-” of 0~10V dimmer.
(2) Motion Sensor:
Connect “L (black)”, “N (white)”, and “GND (green)” to 100~277VAC lines accordingly.
Top Related