1
Amin ArbabianJan M. Rabaey
Lecture 5:Resonance Two-Ports
EE142 – Fall 2010Introduction
Sept. 9th, 2010
2
Announcements
HW2 Posted, due Thurs. Sept. 16th, 330pm before class in EE142 drop box
2
3
Overview
Last Lecture– Resonance circuits, series RLC “Tank”
– Passive amplification
– Quality factor
This Lecture– More on Resonant circuits
– Bandwidth of tuned circuits
– Tuned amplifiers
– Introduction to two ports
4
Source of Resonance
What makes the circuit resonate?– Reactive components cancel
1
+ + --vL vC
3
5
Back to Transfer Function
6
Canonical Form
4
7
Root Locus
8
Selectivity
5
9
Selectivity
10
Bandwidth and Q
6
11
Parallel RLC Circuit
12
Circuit Duality
7
13
Duality
14
Circuit Duality
Basic Circuit Theory, Desoer and Kuh
8
15
Q and Phase Response
16
Phase Response
9
17
Transfer Function
18
Parallel RLC Transfer Function
10
19
Parallel Resonance
20
Tuned Amplifier
Parallel RLC load results in a tuned amplifier. – The impedance of the load
is selective.
How is gain related to Q?
11
21
Series-Shunt Transformation
22
Transformer
12
23
Tank Dominated by Inductor Q
24
Inductance Value for Tuned Amplifier
13
25
Other Advantages of Tuned Amplifier
26
Cascode Tuned Amplifier
14
27
Tuned Amplifier Bandwidth
28
What are the Limits?
To win some of the bandwidth back requires other techniques, such as shunt peaking and distributed amplifiers. Other techniques (some invented here at Berkeley) can also help out.
But can we tune out parasitics and design amplifiers operating at arbitrarily high frequency?
Based on the simple analysis thus far, it seems that for any given frequency, no matter how high, we can simply absorb the parasitic capacitance of the amplifier with an appropriately small inductor (say a short section of transmission line) and thus realize an amplifier at an arbitrary frequency. This is of course ludicrous and we’ll re-examine this question in future lecture.
15
29
TWO PORT NETWORKS
30
Introduction to Two Port Networks
Design problems often need abstraction– Concerned with external behavior (@ “Terminals”)
– A Black-Box view of the component
– Replace by characteristic parameters
When physical circuit models start to fail– High frequency operation
16
31
Introduction (2)
A port is defined as a terminal pair where the current entering one terminal is equal and opposite to the current exiting the second terminal.
Any circuit with four terminals can be analyzed as a two-port if it is free of independent sources and the current condition is met at each terminal pair.
All the complexity of the two-port is captured by four complex numbers (which are in general frequency dependent).
32
Two Port Network Representations
Various equivalentways of relating the terminal parameters
17
33
Conversion Table
W.S.Harwin, University of Reading
All matrices in the same row are equivalent
34
Example: Transformer
18
35
Coupled Inductors
Z Matrix
Top Related