http://designforeveryone.howest.be/
Laptop Aid 1.7
http://designforeveryone.howest.be/
Marc Van Strydonck / Kevin Deprez
± 56,5 hours€28,67
http://laptophulp2011.blogspot.com
ASSEMBLY MANUAL
http://designforeveryone.howest.be/
BILL OF MATERIAL- Screws: €3,99- Varnish: €5,54- Glue (wood): €4,45-Side hinges: €3,11- Top hinges: €2,39- 5 block wooden beams (190x310x2100): €6,80- 1 flat wooden beam (190x900x2100): €2,39
LAPTOP AID 1.7
Tools: Saw, drill, screwdriver, sandpaper,
varnish, glue, screws
Standard parts: 2 top hinges and 2 side hinges
Tailored parts: Wooden beams
DESCRIPTION Saw the wooden beams to the right size. Look at the technical drawings for the part dimensions.
These dimensions can be adjusted for your own size!
LAPTOP AID 1.7
Technical plans: Yes
Duration: 30 minutes
Saw
Standard parts: No
Tailored parts: Wooden beams
Action cost: No
1
DESCRIPTION Drill the wholes into the wooden beams. Look at the technical drawings to know where the wholes need to be drilled.
LAPTOP AID 1.72
Technical plans: Yes
Duration: 30 minutes
Drill
Standard parts: No
Tailored parts: Wooden beams
Action cost: No
3 DESCRIPTION Rub all of the surfaces with sandpaper until they are smooth enough, so you will not harm yourself when using the product.
LAPTOP AID 1.7
Technical plans: No
Duration: 1 hours
Sandpaper
Standard parts: No
Tailored parts: Wooden beams
Action cost: No
4 DESCRIPTION The tailored parts are assembled with screws. Between the surfaces we used glue to strenghten the product.
ATTENTION: If you are righthanded, mirror the assembly. Don’t forget to mirror the book support as well.
LAPTOP AID 1.7
Technical plans: Yes
Duration: 3 hours (glue drying included)
Glue and screwdriver
Standard parts: No
Tailored parts: Wooden beams
Action cost: No
5 DESCRIPTION The tailored parts are assembled with screws. Between the surfaces we used glue to strenghten the product.
LAPTOP AID 1.7
Technical plans: Yes
Duration: 3 hours (glue drying included)
Glue and screwdriver
Standard parts: No
Tailored parts: Wooden beams
Action cost: No
6 DESCRIPTION Varnish the front and back and let it dry. Rub the parts a little bit with sandpaper and varnish it again. This will ensure a clean surface finishing.
ATTENTION: Before varnishing, make sure the surface of the mouse pad is smooth enough.
LAPTOP AID 1.7
Technical plans: No
Duration: 2x24 hours (varnish drying included)
Varnish
Standard parts: No
Tailored parts: Wooden beams
Action cost: No
7 DESCRIPTION Fasten the top hinges.
LAPTOP AID 1.7
Technical plans: No
Duration: 10 minutes
Screwdriver
Standard parts: Top hinges
Tailored parts: No
Action cost: No
8 DESCRIPTION Fasten the side hinges
LAPTOP AID 1.7
Technical plans: No
Duration: 10 minutes
Screwdriver
Standard parts: Side hinges
Tailored parts: No
Action cost: No
9 LAPTOP AID 1.7
TECHNICAL ADDENDUM
http://designforeveryone.howest.be/
TEAM CONTACTS
http://designforeveryone.howest.be/
[email protected] +32 4 72 450 300
[email protected] +32 4 74 772 128
[email protected] +32 4 97 601 940
[email protected] +32 9 220 99 78
http://designforeveryone.howest.be/
Top Related