KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2018
1 of 11
PART NUMBER BUILDER
+ + + + + +
The Optic Arts® KNIFE EDGE system produces an elegant, seamless sharp-edged architectural feature with uniform lighting on adjacent surfaces. The sharp edge extrusion attaches to extruded aluminum wall brackets and accepts 5/8” thick drywall on its underside.
Create a soft diffused illumination, color tuning or an asymmetrical forward distribution by selecting the desired beam control offering.
• Integrated asymmetric light engine or soft perimeter glow
• Factory cut to length
• Factory built precision Inside and Outside Corners
• 5 Year Warranty
• Painted Eggshell RAL 9010 with primer to accept field painting
• Featuring Focus Optics Technology (F.O.T.™) or FLEX STP.
Product Application Render
Product Render
FEATURES
KNIFE EDGE Specification Sheet
F.O.T.™
1: Endcaps not applicable to Raft or Coffer Configs.2: See specification guide on page 4.
PDCL = Pure DC® Lite 9, 10
ND = Non-Dim9
010 = 0-10V System Dimming9
VIN = VintageDim® System 0-10V DimmingPDC = Pure DC® Dimming9
DMX = DMX System DimmingLN2 = Lutron Hi-Lume® A-Series 2-Wire Dimming9
LN3 = Lutron Hi-Lume® A-Series 3-Wire/Ecosystem Dimming9
LNP = Lutron Hi-Lume® Premier3-Wire/Ecosystem Dimming9
DIMMING
3: Must be used with DMX Dimming.4: Must be used with DMX Dimming or VintageDim® Dimming.
8: Only available with F.O.T.™ 2700K, 3000K. 9: Not compatible with Variable White.10: Not compatible with F.O.T.™.
See specification guide on page 4 for instructions on specifying length.
LENGTHST = StraightCO = CofferRA = RaftIL = Inside LOL = Outside L
CONFIG.2
40 = FLEX STP 4.070 = FLEX STP 7.050 = FLEX STP RGBW 5.03
58 = FLEX STP VW 5.84
AS = Asymmetric 9.0
LIGHT ENGINEY = YesN = No
ENDCAPS1
18 = 1800K (STP)23 = 2350K (STP)27 = 2700K (F.O.T.™); 2750K (STP)29 = 2930K (STP)30 = 3000K (F.O.T.™)35 = 3500K (F.O.T.™);3550K (STP)VW = Variable White (STP)
RGBW27 = RGBW (STP)
COLORKE
SERIES
Note: All White and Variable White Colors are JA8 2016 when used with 0-10V, DMX, Lutron A-Series (LN2), Lutron Premier (LN3) or VintageDim® (VIN) dimming.
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2019
2 of 11
#
MECHANICAL
12345
Blade Body - 8.00’Inside Corner (Coffer)Outside Corner (Raft)Aligner Spline BracketWall Bracket - 2.00’
11: Available with F.O.T.™ 3500K.
12: Available with F.O.T.™ 2700K, 3000K.
13: Available with STP.
14: Not compatible with F.O.T.™.
DESCRIPTION
5
2 4
1
3
5.102”(129.59mm)
2.515”(63.88m
m)
0.625”(15.87m
m)
LIGHT ENGINE NOTES:Buildable Increment - The KNIFE body will be factory cut to exact length based on specifications. F.O.T.™ has a buildable increment of 6.00”; STP has a cuttable increment of 0.90” to 2.46” (dependant on version - please
see STP specification for more details.) When specifying system length, this increment should be taken into account. The factory will supply lengths as needed to most efficiently make up specified run length. When total
system length exceeds light engine length, the light engine can be centered in the KNIFE body. Leaving up to 3.00” between the end of the light engine and the end of the total system run is acceptable and will not cause
a visible dark spot in application. If space must be larger based on system configuration, the factory will contact the customer to discuss a solution.
Corners - Light engine should be held back 2.00-3.00” on either side of a COFFER (inside) corner. This will prevent hotspots in the corners. If this is not possible based on specified lengths, the factory will contact the
customer to discuss a solution. Light engine does not need to be held back on RAFT (outside) corners, but can be held back up to 3.00” without creating a dark spot.
PRODUCT INFORMATION
CRIBinningInput VoltageDimming Options
Wire Size
Connections (F.O.T.™ Only)
Certification
Operating TemperatureEnvironment
8511, 9012, 9513
<2 Step MacAdam Ellipse24VDC• PURE DC®
• MLV14
• 0-10V• DMX• Lutron (2-WIRE, 3-WIRE, EcoSystem)F.O.T.™: 18 AWG, 2 Wire; STP White: 20 AWG, 2 Wire; STP Variable White: 20 AWG, 3 WireConnectable end to end in-field using on board connector system.ETL - Conforms to UL Standard 2108.Title 24 - All White and Variable White Colors are JA8 2016 when used with 0-10V, DMX, Lutron A-Series (LN2), Lutron Premier (LN3) or VintageDim® (VIN) dimming.-40° C (-40°F) to +50°C (+122°F)Indoor
BEAM OPTIONS
OPEN BEAM(FLEX STP)
OPTICS(F.O.T.™)
Note: Lens included if used with FLEX STP.
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2018
3 of 11
COMPATIBLE LIGHT ENGINES
COLOR
DELIVERED LUMENS:
DELIVERED LUMENS:
DELIVERED LUMENS:COLOR
COLOR
FLEX STP 70
FLEX STP 40
Environment: IndoorCRI: 95Voltage: 24Watts/Ft: 7.0Max Run: 13’ (on one driver)Cuttable Increment: Every 0.90”
Environment: IndoorCRI: 95Voltage: 24Watts/Ft: 4.0Max Run: 24’ (on one driver)Cuttable Increment: Every 0.90”
LM/FT
LM/FT
LM/FT
2950K* 350.000.39”0.39”
0.90” (Cut Increment)
0.90” (Cut Increment)
0.1285”
0.1285”
Note: Stated lumen values have a tolerance of +/- 10%.
Note: Stated lumen values have a tolerance of +/- 10%.
Note: Stated lumen values have a tolerance of +/- 10%.
2930K*
3000K
467.00
533.00
F.O.T.™ (Asymmetric)Environment: IndoorCRI: 90Voltage: 24Watts/Ft: 9.0Max Run: 10’ (on one driver)Lengths: 6.00”, 12.00”, 24.00” modules available.
6.00” (152.40mm)
0.72”*JA8 2016 when used with 0-10V, DMX, or Lutron Premier (LNP) dimming.
*JA8 2016 when used with 0-10V, DMX, or Lutron Premier (LNP) dimming.
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
COLOR
DELIVERED LUMENS:FLEX STP VARIABLE WHITELM/FT
Note: Stated lumen values have a tolerance of +/- 10%.
Both colors at 100% (2829K)*
355.00
*JA8 2016 when used with 0-10V, DMX, or Lutron Premier (LNP) dimming.
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
COLOR LM/FT
All LEDs at 100% 205.000.39”
0.39”
2.46” (Cut Increment)
Environment: IndoorVoltage: 24Watts/Ft: 5.8Max Run: 16’Cuttable Increment: Every 1.97”
0.39”
0.33”
1.97” (Cut Increment)
FLEX STP RGBWEnvironment: IndoorVoltage: 24Watts/Ft: 5.0Max Run: 19’Cuttable Increment: Every 2.46”
DELIVERED LUMENS:
Note: Stated lumen values have a tolerance of +/- 10%.
*JA8 2016 when used with 0-10V, DMX, or Lutron Premier (LNP) dimming.
180 165150
135
120
105
90
75
60
45
3015015
30
45
60
75
90
105
120
135
150165
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2019
4 of 11
SPECIFICATION GUIDE
HOW TO SPECIFY LENGTH:
Straight Configuration - Specify overall length of straight run to the nearest 1/4”, if endcaps are specified the dimension of the endcaps will be taken into account when calculating overall length at the factory.
Coffer Configuration - Specify length of each side measuring on the mounting surface. For example, the below would be specified as 8’+2’+8’+2’. Factory built corners will be included.
Raft Configuration - Specify length of each side measuring on the mounting surface. For example, the below would be specified as 8’+2’+8’+2’. Factory built corners will be included.
8’ overall (specified length)
8’ (Dimension B)
8’ (Dimension B)
(Dimension D)
(Dimension D)
(Dim
ension C)
Light Direction
Light Direction
2’ (D
imen
sion
A)
2’ (D
imension A) (D
imen
sion
C)
1/16” 1/16”
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2018
5 of 11
SPECIFICATION GUIDE
Inside L Configuration - Specify length of each side measuring on the mounting surface. For example, the below would be specified as 8’+2’. Factory built corners will be included.
Outside L Configuration - Specify length of each side measuring on the mounting surface. For example, the below would be specified as 8’+2’. Factory built corners will be included.
8’ (Dimension B)
8’ (Dimension B)
Light Direction
Light Direction2’ (D
imen
sion
A)
2’ (D
imension A)
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2019
6 of 11
PURE DC® MLV (PDC)
40W 120/277VAC PURE DC® MLV DIMMABLE DRIVER
96W 120/277VAC PURE DC® MLV DIMMABLE DRIVER
PDC.40.24
PDC.96.24
DESCRIPTIONPART
COMPATIBLE DRIVERS
DIMENSIONS
DIMMING PERFORMANCE
40W96W
L 14.25”; W 3.00”; H 2.88”
L 14.75”; W 4.31”; H 4.81”
PURE DC® DRIVER Dims to 0.1% on most MLV dimmers
120 VAC
PURE DC®
DRIVER
24V DC+
24V DC-
+
–
120 VAC WIRING
PURE DC®
DRIVER
24V DC+
24V DC-
277 VAC+
–
277 VAC WIRING
PURE DC® LITE (PDCL)PART DESCRIPTION
PDCL.30.24PDCL.60.24PDCL.96.24
30W 100-277VAC DIMMABLE DRIVER
60W 100-277VAC DIMMABLE DRIVER
96W 100-277VAC DIMMABLE DRIVER
DIMENSIONS
DIMMING PERFORMANCE
PDCL.30.24 H 1.03”; W 6.50”; D 3.62”
PDCL.60.24 H 1.03”; W 7.40”; D 3.62”
PDCL.96.24 H 1.61”; W 8.66”; D 3.66”
PURE DC® LITE DRIVER Dims to 1% on most MLV dimmers
NOTE: Must be loaded at least 10% of rated load to obtain optimal dimming.
L Black N White
100 - 277 VAC
GROUND
24V DC+
24V DC-Red+ Black-Ground
PURE DC® LITE
+
–
L Black N White
100 - 277 VAC
GROUND
24V DC+
24V DC-
Red+ Black-Ground
PURE DC® LITE
+
–
TRIAC DIMMER
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2018
7 of 11
ELECTRONIC DRIVER - NON-DIM (ND)
96W 120-277VAC ELECTRONIC DRIVERGG100E-24-UNV
DESCRIPTIONPART
GG100-24-UNV
120 - 277 VAC
DIMENSIONS
DIMMING PERFORMANCE
ELECTRONIC DRIVER H 3.00”; W 11.46”; D 1.30”
ELECTRONIC DRIVER Non-Dim
24V DC+ 24V DC-
COMPATIBLE DRIVERS
ELECTRONIC DRIVER W/0-10V MODULE (010)
96W 120-277VAC ELECTRONIC DRIVER WITH 0-10V DIMMING
MODULE (SINK)
GG100E-24-UNV-010V
DESCRIPTIONPART
DIMENSIONS
DIMMING PERFORMANCE
ELECTRONIC DRIVER - 0-10V H 3.00”; W 11.46”; D 1.30”
ELECTRONIC DRIVER - 0-10V Dims below 1% on most 0-10V dimmers
GG100-24-UNV
0-10 +
24V +
0-10 -
24V -
120 - 277 VAC0 - 10 V CONTROLLER
VIOLET WIRE TO 0-10V CONTROLLER +
YELLOW WIRE TO LED +BLACK WIRE TO DC - OUTPUT OF DRIVER
RED WIRE TO DC + OUTPUT OF DRIVERBLUE WIRE TO LED -
GRAY WIRE TO 0-10V CONTROLLER -
FIELD INSTALLED IN LOW VOLTAGE WIRING COMPARTMENT
- Max number of 25 modules on one dimmer. Consult dimmer datasheet for maximum device limitation of a specific controller.
- Install DIM-010V Module in low voltage wiring compartment.
DIM-010V0-10V MODULE
GG100-24-UNV
120 - 277 VAC
ELECTRONIC DRIVER W/DMX MODULE
96W 120-277VAC ELECTRONIC DRIVER WITH eldoLED DMX
DIMMING MODULE
GG100E-24-UNV-DMX
DESCRIPTIONPART
*Must be installed in UL box (by others)
DMX MODULE
DIMENSIONS
DIMMING PERFORMANCE
96W H 3.00”; W 11.46”; D 1.30”
DMX MODULE H 1.97”; W 6.02”; D 0.91”
ELECTRONIC DRIVER - DMX MODULE Dims to 0.1% on most DMX systems
®
24V DC+
DMX in +DMX in -
DMX in shieldLEDSync thru +
LEDSync thru -LEDSync shield
OUT TO NEXT MODULE
FROM DMX CONTROLLER (BY OTHERS)
24V DC-
LED+CH1 -CH2 -CH3 -CH4 -
¨
LED +
B
CH1 -
G
CH2 -
R
CH3 -
LED +
PURE DC® LITE (PDCL)PART DESCRIPTION
PDCL.30.24PDCL.60.24PDCL.96.24
30W 100-277VAC DIMMABLE DRIVER
60W 100-277VAC DIMMABLE DRIVER
96W 100-277VAC DIMMABLE DRIVER
DIMENSIONS
DIMMING PERFORMANCE
PDCL.30.24 H 1.03”; W 6.50”; D 3.62”
PDCL.60.24 H 1.03”; W 7.40”; D 3.62”
PDCL.96.24 H 1.61”; W 8.66”; D 3.66”
PURE DC® LITE DRIVER Dims to 1% on most MLV dimmers
NOTE: Must be loaded at least 10% of rated load to obtain optimal dimming.
L Black N White
100 - 277 VAC
GROUND
24V DC+
24V DC-Red+ Black-Ground
PURE DC® LITE
+
–
L Black N White
100 - 277 VAC
GROUND
24V DC+
24V DC-
Red+ Black-Ground
PURE DC® LITE
+
–
TRIAC DIMMER
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2019
8 of 11
ELECTRONIC DRIVER W/VintageDim® MODULE
96W 120-277VAC ELECTRONIC DRIVER WITH VINTAGEDIM®
DIMMING MODULE STANDARD DIM TO WARM CURVE
96W 120-277VAC ELECTRONIC DRIVER WITH VINTAGEDIM®
DIMMING MODULE CUSTOM CURVE
GG100E-24-UNV-W
GG100E-24-UNV-C
DESCRIPTIONPART
DIMENSIONS
DIMMING PERFORMANCE
ELECTRONIC DRIVER H 3.00”; W 11.46”; D 1.30”
VintageDim® MODULE H 1.56”; W 1.56”; D 0.78”
ELECTRONIC DRIVER - VintageDim® Dims below 1% on most 0-10V dimmers
VIOLET WIRE TO 0-10V CONTROLLER +
BLACK WIRE TO LED +BLACK WIRE TO LED +
BLUE WIRE TO DC - OUTPUT OF DRIVERRED WIRE TO DC + OUTPUT OF DRIVER
WHITE WIRE TO LED (COOL) -YELLOW WIRE TO LED (WARM) -
GRAY WIRE TO 0-10V CONTROLLER -
GG100-24-UNV
0-10 + 0-10 -
120 - 277 VAC
0 - 10 V CONTROLLER
FIELD INSTALLED IN LOW VOLTAGE WIRING COMPARTMENT
- Consult dimmer datasheet for maximum device limitation of a specific controller.- Install VintageDim® Module in low voltage wiring compartment.
* Cap off one + wire unless using two separate strips
VintageDim® MODULE
Y
Warm –
* Wire is either white or red, depending on specific product.
Cool –
W/R*B
24V +
COMPATIBLE DRIVERS
GG100-24-UNV
120 - 277 VAC
ELECTRONIC DRIVER W/DMX MODULE
96W 120-277VAC ELECTRONIC DRIVER WITH eldoLED DMX
DIMMING MODULE
GG100E-24-UNV-DMX
DESCRIPTIONPART
*Must be installed in UL box (by others)
DIMENSIONS
DIMMING PERFORMANCE
96W H 3.00”; W 11.46”; D 1.30”
DMX MODULE H 1.97”; W 6.02”; D 0.91”
ELECTRONIC DRIVER - DMX MODULE Dims to 0.1% on most DMX systems
24V DC+
OUT TO NEXT MODULE
FROM DMX CONTROLLER (BY OTHERS)
24V DC-
¨
LED+DMX in +
LEDSync thru +
CH1 - (W/R)*DMX in -
LEDSync thru -
CH2DMX in shield
LEDSync shield
WARMCOOLLED+
*Wire is either white or red, depending on specific product
DMX MODULE
For more options to wire DMX module, reference DMX System cut sheet.
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2018
9 of 11
DIMMER WITH NEUTRAL
DIMMER WITHOUT NEUTRAL
LUTRON HI-LUME® 1% 2-WIRE (LN2): 2-WIRE CONTROL FORWARD PHASE
5-40W, 120VAC, 2-WIRE FORWARD PHASE DRIVER
Dims to 1% with compatible Lutron controlsLUTRON HI-LUME® 1% 2-WIRE
LTEA4U1UKL-CV240
DESCRIPTIONPART
COMPATIBLE DRIVERS
Optic Arts is a Lutron OEM Advantage Partner
DIMENSIONS
DIMMING PERFORMANCE
LUTRON HI-LUME® 1% 2-WIRE H 4.00”; W 4.89”; D 2.62”LUTRON HI-LUME®1% 2-WIRE
NEUTRAL-WIREDIMMER/MODULE/PANEL
FORWARD PHASE DIMMERWITHOUT NEUTRAL
LUTRON HI-LUME®1% 2-WIRE
24V DC -
24V DC -
24V DC +
24V DC +
LINE/HOTDIMMED LINE
(BLACK)
DIMMED LINE (BLACK)
NEUTRAL (WHITE)
NEUTRAL (WHITE)
NEUTRAL
LINE/HOT
NEUTRAL
NEUTRAL
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2019
10 of 11
3-WIREDIMMER/MODULE/PANEL
3-WIRE
ECOSYSTEM
LUTRON HI-LUME® 1% (LN3): 3-WIRE/ECOSYSTEM
5-40W, 120-277VAC, 3-WIRE/ECOSYSTEM DRIVERL3DA4U1UKL-CV240
DESCRIPTIONPART
COMPATIBLE DRIVERS
Optic Arts is a Lutron OEM Advantage Partner
DIMENSIONS
DIMMING PERFORMANCE
LUTRON HI-LUME® 1% 3-WIRE/ECOSYSTEM
H 4.00”; W 4.89”; D 2.62”
Dims to 1% with compatible Lutron controlsLUTRON HI-LUME® 1% 3-WIRE/ECOSYSTEM
LUTRON HI-LUME®1% 3-WIRE
LUTRON HI-LUME®1% 3-WIRE
24V DC -
24V DC +
LINE/HOT
TO ECOSYSTEM DIGITAL LINK
E1 (Purple)
E1 (Purple)
SWITCHED LINE(BLACK)
DIMMED LINE (ORANGE)
DIMMED LINE (ORANGE)
E2 (Purple)
E2 (Purple)
NEUTRAL (WHITE)NEUTRAL
LINE/HOT
NEUTRAL
NEUTRAL
24V DC -
24V DC +
KNIFE EDGE Specification Sheet
716 Monterey Pass Rd, Monterey Park, CA 91754
213.250.6069 | [email protected] | www.opticarts.com
Optic Arts reserves the right to modify this specification without prior notice.
Last Modified: September 13, 2019 11:29 AM© Optic Arts 2018
11 of 11
3-WIRE
ECOSYSTEM
LUTRON HI-LUME® PREMIER: 3-WIRE/ECOSYSTEM
COMPATIBLE DRIVERS
2-96W, 120-277VAC, 3-WIRE/ECOSYSTEM DRIVERL3D0-96W24V-U
DESCRIPTIONPART
DIMENSIONS
DIMMING PERFORMANCE
LUTRON HI-LUME® PREMIER H 5.5”; W 10.5”; D 2.0”
Dims to 0.1% with compatible Lutron controlsLUTRON HI-LUME® PREMIER
LUTRON HI-LUME®PREMIER DRIVER
LUTRON HI-LUME®PREMIER DRIVER
(WITH ECOSYSTEM CONTROL & SOFT-ON FADE TO BLACK TECHNOLOGY)
NOTE: Lutron soft-on, fade to black technology available with Ecosystem Digital Control only.
24V +
24V +
24V -
24V -
E1 (Purple)
SWITCHED LINE/HOT (L)
DIMMED HOT (DH)
E2 (Purple)TO ECOSYSTEM
DIGITAL LINK
120-277 VAC
3-WIREDIMMER/MODULE/PANEL
LINE/HOT
NEUTRAL
NEUTRAL
Optic Arts is a Lutron OEM Advantage Partner
Top Related