Just-In-Time and Just-In-Time and Lean ProductionLean Production
JIT In Services
Competition on speed & qualityCompetition on speed & qualityMultifunctional department store Multifunctional department store
workersworkersWork cells at fast-food restaurantsWork cells at fast-food restaurantsJust-in-time publishing for Just-in-time publishing for
textbooks - on demand publishing textbooks - on demand publishing a growing industrya growing industry
Construction firms receiving Construction firms receiving material just as neededmaterial just as needed
Producing only what is needed, Producing only what is needed, when it is neededwhen it is needed
A philosophy A philosophy An integrated management systemAn integrated management systemJIT’s mandate: JIT’s mandate:
Eliminate all wasteEliminate all waste
What is JIT ?
....
Lean Operations:Best Implementation is Toyota Production System
• TPS is a production management system that aims for the “ideal” through continuous improvement
• Includes, but goes way beyond JIT. Pillars:– Synchronization
• Reduce transfer batch sizes• Level load production• Pull production control systems (vs. push): Kanban• Quality at source• Layout: Cellular operations
– Continuous Improvement (Kaizen): through visibility & empowerment
Basic Elements of JIT
1.1. Flexible resourcesFlexible resources2.2. Cellular layoutsCellular layouts3.3. Pull production systemPull production system4.4. Kanban production controlKanban production control5.5. Small-lot productionSmall-lot production6.6. Quick setupsQuick setups7.7. Uniform production levelsUniform production levels8.8. Quality at the sourceQuality at the source9.9. Total productive maintenanceTotal productive maintenance10.10. Supplier networksSupplier networks
Toyota’s waste elimination in Operations
1. Overproduction
2. Waiting
3. Inessential handling
4. Non-value adding processing
5. Inventory in excess of immediate needs
6. Inessential motion
7. Correction necessitated by defects
Other Important Points
• Only make what you need• only buy what you need, when you need it• continuous process improvement• as the level of the water lowers, new problems
or inefficiencies are identified
Waste in Operations
Waste in Operations
Waste in Operations
Flexible Resources
Multifunctional workersMultifunctional workersGeneral purpose machinesGeneral purpose machinesStudy operators & improve Study operators & improve
operationsoperations
Kanban Production Control System
Kanban card indicates standard quantity Kanban card indicates standard quantity of productionof production
Derived from two-bin inventory systemDerived from two-bin inventory system Kanban maintains discipline of pull Kanban maintains discipline of pull
productionproduction Production kanban authorizes productionProduction kanban authorizes production Withdrawal kanban authorizes movement Withdrawal kanban authorizes movement
of goodsof goods
A Sample Kanban
Types of Kanbans
Bin Kanban - when bin is empty Bin Kanban - when bin is empty replenishreplenish
Kanban SquareKanban SquareMarked area designed to hold itemsMarked area designed to hold items
Signal KanbanSignal KanbanTriangular kanban used to signal Triangular kanban used to signal
production at the previous workstationproduction at the previous workstation Material KanbanMaterial Kanban
Used to order material in advance of a Used to order material in advance of a processprocess
Supplier KanbansSupplier KanbansRotate between the factory and suppliersRotate between the factory and suppliers
Determining Number of Kanbans
wherewhere
NN = number of kanbans or containers= number of kanbans or containersdd = average demand over some time period= average demand over some time periodLL = lead time to replenish an order= lead time to replenish an orderSS = safety stock= safety stockCC = container size= container size
No. of Kanbans =No. of Kanbans =average demand during lead time + safety stockaverage demand during lead time + safety stock
container sizecontainer size
NN = =dLdL + + SS
CC
Determining the Number of Kanbans
dd = 150 bottles per hour= 150 bottles per hourLL = 30 minutes = 0.5 hours= 30 minutes = 0.5 hoursSS = 0.10(150 x 0.5) = 7.5= 0.10(150 x 0.5) = 7.5CC = 25 bottles= 25 bottles
Round up to 4 (to allow some slack) or Round up to 4 (to allow some slack) or down to 3 (to force improvement)down to 3 (to force improvement)
NN = == =
= = 3.3 kanbans or containers= = 3.3 kanbans or containers
dLdL + + SSCC
(150 x 0.5) + 7.5(150 x 0.5) + 7.5
252575 + 7.575 + 7.5
2525
Components of Lead Time
Processing timeProcessing time Reduce number of items or improve Reduce number of items or improve
efficiencyefficiencyMove timeMove time
Reduce distances, simplify Reduce distances, simplify movements, standardizemovements, standardize routingsroutings
Waiting timeWaiting time Better scheduling, sufficient capacityBetter scheduling, sufficient capacity
Setup timeSetup time Generally the biggest bottleneckGenerally the biggest bottleneck
Common Techniques for Reducing Setup Time
• Preset Buttons/settings
• Quick fasteners
• Reduce tool requirements
• Locator pins
• Guides to prevent misalignment
• Standardization
• Easier movement
Quality at the Source
Jidoka is authority to stop production Jidoka is authority to stop production lineline
Andon lights signal quality problemsAndon lights signal quality problemsUndercapacity scheduling allows for Undercapacity scheduling allows for
planning, problem solving & planning, problem solving & maintenancemaintenance
Visual control makes problems visibleVisual control makes problems visiblePoka-yoke prevents defects (mistake Poka-yoke prevents defects (mistake
proof the system)proof the system)
Visual Control
In use at Harley-Davidsonand at Opal Plant - Russelsheim
Visual Control
Kaizen
Continuous improvementContinuous improvementRequires total employment Requires total employment
involvementinvolvementEssence of JIT is willingness of Essence of JIT is willingness of
workers toworkers toSpot quality problemsSpot quality problemsHalt production when necessaryHalt production when necessaryGenerate ideas for improvementGenerate ideas for improvementAnalyze problemsAnalyze problemsPerform different functionsPerform different functions
Total Productive Maintenance (TPM)
Breakdown maintenanceBreakdown maintenance Repairs to make failed machine operationalRepairs to make failed machine operational
Preventive maintenancePreventive maintenance System of periodic inspection & maintenance System of periodic inspection & maintenance
to keep machines operatingto keep machines operating
TPM combines preventive maintenance & TPM combines preventive maintenance & total quality conceptstotal quality concepts
Commercial industry answer to PMCS
TPM Requires Management to:
Design products that can be easily produced Design products that can be easily produced on existing machineson existing machines
Design machines for easier operation, Design machines for easier operation, changeover, maintenancechangeover, maintenance
Train & retrain workers to operate machinesTrain & retrain workers to operate machines Purchase machines that maximize Purchase machines that maximize
productive potentialproductive potential Design preventive maintenance plan Design preventive maintenance plan
spanning life of machinespanning life of machine
Goals of JIT
1.1. Reduced inventory - Reduced inventory - where?where?
2.2. Improved qualityImproved quality3.3. Lower costsLower costs4.4. Reduced space Reduced space
requirementsrequirements5.5. Shorter lead timeShorter lead time6.6. Increased Increased
productivityproductivity7.7. Greater flexibilityGreater flexibility
8.8. Better relations with Better relations with supplierssuppliers
9.9. Simplified scheduling Simplified scheduling and control activitiesand control activities
10.10. Increased capacityIncreased capacity11.11. Better use of human Better use of human
resourcesresources12.12. More product varietyMore product variety13.13. Continuous Process Continuous Process
ImprovementImprovement
Use JIT to finely tune an operating Use JIT to finely tune an operating systemsystem
Somewhat different in Somewhat different in USA than JapanUSA than Japan
JIT is still evolvingJIT is still evolving JIT as an inventory reduction program JIT as an inventory reduction program
isn’t for everyone - JIT as a CPI isn’t for everyone - JIT as a CPI program is!program is!
Some systems need Just-in-Some systems need Just-in-Case inventoryCase inventory
JIT Implementation
Reverse Logistics: Important or Irritant?
Estimated $100 billion industry in 2006
“In an ideal world, reverse logistics would not exist.”
Jim Whalen, “In Through the Out Door,”Warehousing Management, March 2001
“Now, more than ever, reverse logistics is seen
as being important.”
Dale Rogers, Going Backwards, 1999
Reverse Logistics - What is it?The Army’s Definition
The return of serviceable supplies that are surplus to the needs of the unit or are unserviceable and in need of rebuild or remanufacturing to return the item to a serviceable status
Reverse Logistics - What is it?The Commercial Perspective
• Reverse Logistics is the process of moving products from their typical final destination to another point, for the purpose of capturing value otherwise unavailable, or for the proper disposal of the products.
Typical Reverse Logistics Activities
• Processing returned merchandise - damaged, seasonal, restock, salvage, recall, or excess inventory
• Recycling packaging materials/containers
• Reconditioning, refurbishing, remanufacturing
• Disposition of obsolete stuff• Hazmat recovery
Why Reverse Logistics?
• Competitive advantage
• Customer service
- Very Important: 57%
- Important: 18%
- Somewhat/unimportant:23%
• Bottom line profits
Reverse Logistics - New Problem?
• Sherman• Montgomery Ward’s - 1894• Recycling/remanufacturing in 1940s• World War II - 77,000,000 square feet of
storage across Europe with over $6.3 billion in excess stuff
• Salvage and reuse of clothing and shoes in the Pacific Theater World War II
Key Dates in Reverse Logistics
• World War II – the advent of refurbished automobile parts due to shortages
• 1984 - Tylenol Scare - Johnson and Johnson• 1991 - German ordinance that put teeth in
environmental reverse pipeline• Summer 1996 – UK Packaging and Packaging
Waste Legislation• 1998 - first real study of reverse logistics in
the US - University of Nevada, Reno• 2001 – EU goal of 50-65% recovering or
recycling of packaging waste
Reverse Logistics
A US Army Perspective
Operation Iraqi Freedom
The US Army moved the equivalent of 150 Wal-Mart Supercenters to Kuwait in a matter of a few months
Military Operations and Excess
“In battle, troops get temperamental and ask for things which they really do not need. However, where humanly possible, their requests, no matter how unreasonable, should be answered.” George S. Patton, Jr.
Jane’s Defence Weekly
“Recent report (Aug 2003): There is a 40 hectare (~100 acres) area in Kuwait with items waiting to be retrograded back to the US.”
From GAO Audit Report
Does this create a problem?
From GAO Audit Report
Reverse Logistics
The Commercial Perspective
Commercial Definition
Anytime money is taken from a company reserves to support a product that has already shipped is a reverse logistics operation.
- Reverse Logistics AssociationApparel and Catalog sales - ~35 %Nokia call center operations - $1.3 bn
Recalls and Reverse Logistics
• Brand Damage – Toyota resale value
• 4+ million vehicles recalled by Toyota
• Mattel recall
• PCA recall
Reverse Logistics
• Rate of returns?
• Cost to process a return?
• Time to get the item back on the shelf if resaleable?
Costs - above the cost of the item
– Merchandise credits to the customers.
– The transportation costs of moving the items from the retail stores to the central returns distribution center.
– The repackaging of the serviceable items for resale.
– The cost of warehousing the items awaiting disposition.
– The cost of disposing of items that are unserviceable, damaged, or obsolete.
Costs
• Process inbound shipment at a major distribution center = 1.1 days
• Process inbound return shipment = 8.5 days
• Cost of lost sales• Wal-Mart: Christmas 2003 - returns = 4
Days of Supply for all of Wal-Mart = 2000 Containers
• PalmOne - 25% return rate on PDAs
More Costs
• Hoover - $40 Million per year
• Cost of processing $85 per item
• Unnamed Distribution Company - $700K items on reverse auction
• 2001 - over $60 billion in returns; $52 billion excess to systems; $40 billion to process
Is it a problem?• Estimate of 2004 holiday returns: $13.2 billion
• % of estimated 2004/2005 holiday returns: 25%
• At 25% - returns for 2009 ~ $117 billion
• Wal-Mart: $6 Billion in annual returns = 17,000 truck loads (>46 trucks a day)
• Electronics: $10 Billion annually in returns
• Personal Computers: $1.5 Billion annually = approximately $95 per PC sold
• 79% of returned PCs have no defects
• Home Depot ~ $10 million in returns in the stores alone
• Local Wal-Mart ~ $1 million a month in returns
Is it a Problem?
• European influence – spread to US - Green Laws• Estee Lauder - $60 million a year into land fills• FORTUNE 500 Company - $200 million over their
$300 million budget for returns• Same Provider - 40,000 products returned per
month; 55% no faults noted• K-Mart - $980 million in returns 1999• Warranty vice paid repairs
More consequences
• Increased Customer Wait Times
• Loss of Confidence in the Supply System
• Multiple orders for the same items
• Excess supplies in the forward pipeline
• Increase in “stuff” in the reverse pipeline
• Constipated supply chain
Impact?
• Every resaleable item that is in the reverse supply chain results in a potential stock out or “zero balance” at the next level of supply.
• Creates a “stockout” do-loop
Results?
• This potential for a stock out results in additional parts on the shelves at each location to prevent a stock out from occurring.
• More stocks = “larger logistics footprint” = the need for larger distribution centers and returns centers.
Reverse Logistics
• According to the Reverse Logistics Executive Council, the percent increase in costs for processing a return, as compared to a forward sale, is an astounding 200-300%.
• Typically, as many as 8-12 more steps per item in the reverse pipeline than items in the forward pipeline
“The truth is, for one reason or another, materials do come back and it is up to those involved in the warehouse to effectively recover as much of the cost for these items as possible.”
- Whalen, “In Through the Out Door”
Wireless Industry Returns
• 1.1 billion handsets produced in 2009
• 4.4 bn subscribers worldwide
• 4% of handsets fail – average cost per phone to OEMs = $90
• 176 mm failed phones in 2009 –
• Less than ½ insured
Returns importance
• 85% of customers will not buy
• 95% will return
RFID and Returns
• Visibility Tracking
• Component tracking
• Data Warehouse on what, why, when
• Altered products
• Not for every product
Impacts of Reverse Logistics
• Forecasting• Carrying costs• Processing costs• Warehousing• Distribution• Transportation• Personnel• Marketing
Next Week
• No class – 22 Jul
• 29 Jul: Resource Planning, Scheduling, Quality
• Take Home Final Exam to be posted by this weekend – due by Friday, 30 Jul
• Harley paper due by Friday, 30 Jul
Top Related