HRMBY, kevimedo
Job Evaluation Methods
In this session….We’ll look at the four major methods used
in job evaluation and the advantages/disadvantages of eachJob Ranking MethodJob Classification MethodPoint MethodFactor Comparison Method
What is job evaluation?
Job evaluation can be defined as “a systematic procedure designed to aid in establishing pay differentials among jobs…”1
Job Evaluation MethodsComparison Method Analysis Method
Entire Job Job Factors
Job Against Scale
Job Against Job
Classification Point Method
RankingFactor Comparison
Ranking MethodRanking
Ranking simply orders the job descriptions from smallest to largest based on the evaluator’s perception of relative value or contribution to the organization’s success.Alternate Comparison (Hi – Lo)Paired comparison: [n * (n-1)] / 2
Ranking MethodAdvantages
• Simple• “Alternation” method
ranks “highest” then “lowest,” then next “highest,” then next “lowest”
• “Paired comparisons” method picks highest out of each pair
• Fast• Most commonly used
Disadvantages• Comparisons can be
problematic depending on number and complexity of jobs
• May appear arbitrary to employees
• Can be legally challenged
• Unreliable
Classification
Job descriptions are slotted into a series of classes that cover the range of jobs. Each class has a definition. These definitions are the standards against which the jobs are compared
Classification MethodAdvantages
• Uses job families/groups instead of individual jobs
• May produce same results as Point Method, but is less costly
Disadvantages• Not useful when jobs
are very different from each other
• May be confusing to employees about why jobs are included in a class
Factor Comparison
Jobs are compared against other jobs on the basis of how much of some desired factor they possess.
Each job’s factors are ranked against each other job’s factors.
The market pay rate for each job is then allocated among the factors based upon a market pay rate scale.
Factor Comparison MethodAdvantages
• Customized to the organization
• Relatively easy to use once it’s set up
• Results in ranking of jobs and a specific dollar value for each job, based on allocating part of the job’s total wage to each factor
Disadvantages• Using dollar values
may bias evaluators by assigning more money to a factor than a job is worth
• Hard to set up• Not easily explained to
employees• Every time wage rates
change, the schedule becomes obsolete
Point Method
These systems have three common characteristics:Compensable elementsFactor degrees are numerically scaledWeights reflecting the relative importance of
each factor
contdCompensable elements are those
characteristics in the job (not the person) that the organization values, that help it pursue its strategy and achieve its objectives.3
Point MethodAdvantages
• Highly stable over time• Perceived as valid by
users and employees• Likely to be reliable
among committee that assesses the jobs
• Provides good data to prepare a response to an appeal
Disadvantages• Time, money, and
effort required to set up
• Relies heavily on key (benchmark) jobs, so if key jobs and correct pay rates don’t exist, the point method may not be valid
What is Hay?Officially known as the Hay Guide Chart-
Profile Method of Job Evaluation©, this system utilizes three factors to arrive at a job’s evaluation. The job’s content is the sole basis for the job evaluation.
The three factors are:
Know-HowProblem SolvingAccountability
contdThe Hay guide charts have been in existence since 1951 and have been used in over 5,000 different organizations worldwide. Interestingly, the Equal Pay Act of 1963 uses “skill, effort, responsibility, and working conditions” as the factors upon which equal work should be determined.4
contdHow are jobs evaluated using the
Hay System?1.Job description questionnaires are
completed and signed by the jobholder, the supervisor, and other managerial staff who have responsibility for the position.
2.The job description questionnaire is given to each member of the job evaluation committee for his/her initial evaluation.
How are jobs evaluated using the Hay System?
3.The committee meets with the jobholder and supervisor to explore questions and clarify content.
4.The committee members then compare their individual evaluations and resolve differences that might exist.
Administrative, Professional & Technical Job Evaluation System
What role does Hay play in determining salaries?
Once a job is evaluated and the salary for the jobholder is set, Hay has little to do with affecting the ongoing salary of the jobholder unless the job’s evaluation is changed.
Administrative, Professional & Technical Job Evaluation System How are jobs evaluated using
the Hay System?
3. The committee meets with the jobholder and supervisor to explore questions and clarify content.
4. The committee members then compare their individual evaluations and resolve differences that might exist.
Administrative, Professional & Technical Job Evaluation Committee
NameName DepartmentDepartment CategoryCategoryMike DoughertyMike Dougherty Human ResourcesHuman Resources AdministrativeAdministrativeIrene FergusonIrene Ferguson Dean of StudentsDean of Students AdministrativeAdministrativeSusan Susan HiggersonHiggerson
Kent LibraryKent Library ProfessionalProfessional
Doug RichardsDoug Richards Public SafetyPublic Safety AdministrativeAdministrativeJim SettleJim Settle Residence LifeResidence Life AdministrativeAdministrativeAnna TrippAnna Tripp TelecommunicationTelecommunication
ssProfessionalProfessional
Alissa VandevenAlissa Vandeven Human ResourcesHuman Resources ProfessionalProfessionalJanuary 2001January 2001
Hay System FactorsKNOW-HOW
The sum total of every kind of skill, however acquired, needed for acceptable job performance.
Hay System FactorsKNOW-HOW
This sum total which comprises the overall “fund of knowledge” has three dimensions – the requirements for:Practical procedures, specialized techniques,
and learned disciplines.Active, practicing skills in the area of human
relationships.
Hay System Factors
KNOW-HOWKnow-how of integrating and harmonizing the
diversified functions involved in managerial situations (operating, supporting, and administrative). This know-how may be exercised consultatively as well as executively and involves in some combination the areas of organizing, planning, executing, controlling, and evaluating.
Hay System Factors
PROBLEM SOLVING
The original “self starting” thinking required by the job for analyzing, evaluating, creating, reasoning, arriving at and making conclusions. To the extent that thinking is circumscribed by standards, covered by precedents, or referred to others, problem solving is diminished and the emphasis correspondingly is on know-how.
Hay System Factors
PROBLEM SOLVING
Problem solving has two dimensions:The environment in which the thinking takes
place.The challenge presented by the thinking to
be done.
Hay System Factors
ACCOUNTABILITY
The answerability for an action and for the consequences thereof. It is the measured effect of the job on end results. It has three dimensions in the following order of importance:Freedom to Act – the degree of personal or
procedural control and guidance the jobholder has.
Hay System Factors
ACCOUNTABILITY
Job Impact on End Results – ranges from direct to indirect impact on end results by auxiliary, contributory, shared, or primary effects.
Magnitude – indicated by the general dynamic dollar size or accountability area(s) most clearly affected by the job.
Administrative, Professional & Technical Job Evaluation System
What steps are taken to assure that the job evaluation process is fairly applied?Hay periodically retrains the members of the job evaluation committee. A consultant comes to campus, spending a day with the committee discussing the appropriate use of the guide charts and the process of evaluating jobs.
Administrative, Professional & Technical Job Evaluation System
What steps are taken to assure that the job evaluation process is fairly applied?Southeast’s job evaluation results have twice been through the process Hay calls “correlation.” This process tests to see if the committee has applied the Hay method in a consistent manner. The correlation process occurs periodically.
Administrative, Professional & Technical Job Evaluation System
What steps are taken to assure that the job evaluation process is fairly applied?After the initial installation of Hay, the Institutional Research department at the University did a comparative study of how male versus female positions fared in the process. The conclusion that then-director Dr. Steven Chatman arrived at was that there was no sex bias in the system as it was applied at Southeast.
Administrative, Professional & Technical Job Evaluation System
What is the distinction between administrative, professional, and technical positions?
These categories of jobs are established under federal regulations for reporting workforce profiles to the Equal Employment Opportunity Commission and the Department of Education. The category labels serve no other University purpose.
Administrative, Professional & Technical Job Evaluation System
What is the distinction between administrative, professional, and technical positions?There are approximately 58 administrative staff, 235 professional staff, and 47 technical staff employed by the University.
Administrative, Professional & Technical Job Evaluation System
What role does Hay play in determining salaries?
The University has adopted a policy for determining salary comparisons for administrative and professional positions. This policy can be found in the Business Policy and Procedure Manual of the University in the Personnel section numbered 03-17.
Administrative, Professional & Technical Job Evaluation System
What role does Hay play in determining salaries?
The role of the Hay job points is to provide the relative comparisons about which the salary policy line can be constructed. In essence, the Hay points represent our link to the salary information developed through survey responses.
Administrative, Professional & Technical Job Evaluation System
What role does Hay play in determining salaries?
By using linear regression, a pay policy line is constructed which determines salary range midpoints. Our pay ranges are 50% deep. The decision that a pay range will be 50% deep is purely an administrative decision that has nothing to do with the Hay system.
Administrative, Professional & Technical Job Evaluation System
What role does Hay play in determining salaries?
Once a job is evaluated and the salary for the jobholder is set, Hay has little to do with affecting the ongoing salary of the jobholder unless the job’s evaluation is changed.
Factor Degrees and Point Systems
What is a Degree Level?It is a scale that reflects differing
quantity or quality of the factorIt is used to differentiate jobs on the
factorIt is a definition that is clear and
unambiguousIt contains explicit language that spells
out the behaviors, skills, or performance expectations for that factor at different levels of the factor
How Do You Develop Degrees?from Otis and Leukart’s (1948) “Rules”
1. Degrees should be selected so that each job falls at only one level. Note: you can include some degrees that do not apply to the current jobs if you feel there is too much of a jump between levels. Another reason to create "empty" levels is if you think new jobs will be created that will require that level in the factor. The number of degrees selected should be no more than are needed to differentiate adequately and fairly between all the jobs being rated.
2. Each degree should be clearly defined in terms the workers can understand.
3. Avoid the use of ambiguous terms, e.g., “strong skills,” “excellent.”
4. Definitions of degrees should be written in objective terms.
5. In writing degree definitions, use examples as much as possible.
How Do You Assign Point Values to the Entire System?1. The maximum number of points assigned is a fairly
arbitrary judgment (500-3000 is common)2. The number must be large enough to allow
sufficient differentiation among the jobs to be evaluated.
3. If there is a very wide spread between the current wages of the highest paid job and the lowest paid job, the maximum number of points will need to be higher
4. If you choose more than one pay system, the number of points or the actual factors themselves do not have to be the same in each one.
5. SUGGESTION FOR YOUR PROJECT: Have no fewer than 1000 points and no more than 2000.
How Do You Assign Point Values to the Degree Levels?First, determine the number of points for
each main factor (e.g., 2000 total points for the system would result in 200 points for a factor weighted at 10%). Then use…The straight-line method, which simply
takes the maximum points for a given factor and divides it by the number of degrees. Note: this method assumes that the degrees should be viewed as equidistant from each other
Position: Engineering ManagerGrade: 7
MAXIMUM FACTOR POINTS FACTOR JE Points
DEGREE LEVEL
FACTOR WEIGHTS
250 Communication & Interpersonal Skills 250 4 10%250 Education & Training 250 5 10%500 Problem Solving & Decision Making 400 4 20%500 Responsibility & Accountability 500 4 20%250 Specialized Knowledge & Application 200 4 10%250 Supervision & Leadership 250 4 10%125 Internal Impact 125 3 5%125 External Impact 75 1 5%125 Planning & Organizing 125 4 5%125 Innovation 90 2 5%
2500 2265 100%
How Do You Assign Point Values to the Degree Levels?
Or the accelerating method, where differences in degrees are seen as greater as you move up in that factor, and so the point differences reflect that jump, e.g., 27, 80, 160, 267, 400
Or the decelerating method, where differences in degrees are seen as smaller as you move up in that factor, and so the point differences reflect it, e.g., 133, 240, 320, 373, 400
Remember…the highest level of a factor is always assigned the full number of points allocated to that factor, and the lowest level of a factor has to have some points assigned to it, i.e., “0” points is not permitted!
THANK YOU
Top Related