9am -Wednesday - May 26 Preview 8-4, Tuesday, May 25 or by Appointment
75100 Lower Diamond RoadWallowa, OR 97885
425-486-1246 • 503-463-4444 • Toll Free 1 800-426-3008
www.murphyauction.com
PUBLIC AUCTIONClosing Wallowa Mill
Sawmill Equipment & Rolling Stock
James G. Murphy Inc.
Wallowa Forest ProductsWallowa, OR
Debarker
MORBARK NW dual stationary head rosserhead debarker w/canted spike rolls, 100 hp drive, FAC 60 hp hydraulic unit, 18’ paddle chain infeed log haul w/hydraulic drive, 25’ H110 outfeed log haul w/4-arm kicker, motor to FALK, s/n: 127
Whole Log Cut Off Saws
L&M 6’ bar type whole log cut off saw, 25 hp, log clamp & stops66” insert tooth whole log cut off saw, 75 hp, w/(3) spare saws54” insert tooth whole log cut off saw, 75 hp, w/(2) spare saws
Step Feeders
(2) 1997 ALOHA MACHINERY 14’x20’ hydraulic 5-step feeders w/60 hp hydraulic unit, job #2095
Headrig Bandmill
KLAMATH 7’ style B right hand double cut headrig bandmill, WEG 300 hp/890 rpm AC motor, mechanical strain, feed through rollcase w/(6) 9”x36” rolls, drives, operators cab w/contents
Resaw
SALEM 6’ single horizontal band resaw, AC 150 hp/1180 rpm arbor drive, air strain, powered knurled feed thru rolls, 8’ powered infeed rollcase, 4’ powered outfeed rollcase, R9-19-38-80, (4) spare COUGAR CUT TECHNOLOGIES 8”x33’ – 2”x.068 gauge resaw bands (new in crate)
Carriage-Drive-Log Turner
SALEM style 42”x10’ 2-knee Temposonic positioned carriage, 66” center to center of knees, log dogs, (2) trucks, pantograph, rail, (2) AUTO QUIP shock absorbers, 90’ of 90 lb rail
SERING/TYRONE BERRY style 100 hp hydraulic carriage drive w/drumSERING 42” hydraulic log turner w/hydraulic unit
Twin End Dogger with Scanner/Optimizer
MAXI-MILL twin end dogging system, w/48” saws, large log side up to 54” saws, system capacities: 4”-26” diameter x 6’-10’ length, large log side w/(2) 48” movable saws, (2) TOSHIBA 150 hp motors, 4-knife bottom slabbing head, 75 hp, (2) 28” 5-key knife type Temposonic positioned slabbing heads, small log side has (2) 48” saws w/(2) 125 hp motors, 4-knife bottom slabbing head (no side slabbing motors), GENCO 20 hp/1200 rpm DC motor to SKK 84 rpm reducer charger drives, (3) JOE scanner heads JS-20-03 w/(2) lasers per head mounted on large log side at 0’-1’-8’ & 9’, log skewing chains & lift arms (no scanning on small log side), infeed log hauls & rollcases, outfeed transfer belts, ALLEN BRADLEY 50 hp DC drive, AB PLC 5/20, computer, control booth w/controls & electrics, FAC 30 hp hydraulic unit, (38) spare 48” saws
Look for additional photos on our website: www.murphyauction.com
Edgers-Optimizer
2001 SALEM 2”x30” top splined arbor edger w/Temposonic positioned 4-saw setworks, TOSHIBA 200 hp arbor drive, key knife chipper head w/200 hp arbor drive, RELIANCE 30 hp w/SEW reducer feed roll drive, knurled feed through rolls, (4) press rolls, SALEM/ALEMITE lube system, 25 & 30 hp hydraulic units, CUTLER HAMMER 7-section MCC w/(1) 150 hp & (2) 200 hp starters, ALLEN BRADLEY 1336 Plus II 30 hp sensorless vector drive, SALEM Temposonic positioned infeed table w/feed chains & press rolls, 12’ 4-strand 81X chain scanner infeed table w/board hooks & pin stops, 9”x54” canted even end rollcase, 12’ 4-strand unscrambler w/hydraulic drive, 30”x10’ & 30”x22’ outfeed belts w/9-finger edger picker system, s/n: 192284.01
2001 INOVEC WANEMASTER optimizer system, 10’ capacity, 12’ pass, (5) DYNAVSION M6-17-12 lasers, s/n: M0311606
SCHURMAN 4”x42” cant edger w/keyed arbor, TOSHIBA 300 hp/1780 rpm arbor drive motor, press rolls, knurled feed thru rolls, (5) LASER BLAZERS, 7’ powered infeed rollcase, 48”x10’ outfeed belt
SCHURMAN 4”x36” board edger w/keyed arbor, TOSHIBA approx 150 hp arbor drive, 7’ powered infeed rollcase, 48”x24’ outfeed belt
Planer-Pineapple Feed Table-Anti Stain System-Slowdown Belt
COASTAL 16-knife, 6”x8” 4-head stud planer w/80 hp top, 40 hp bottom, 40 hp & 60 hp side heads, in & outfeed rolls w/SIEMENS MIDI-MASTER VECTOR 30 hp sensorless drives, AB BULLETIN 1336 dynamic brakes, (4) spare side heads, parts, s/n: CM275-106
COASTAL 20’ hydraulic single pineapple feed bridge table w/(2) 12”x30” canted spiral rolls, (2) 12”x30” smooth rolls, (2) 12”x14” knurled & (2) 12”x14” smooth rolls, GE 20 hp/1180 rpm drive, GENCO 20 hp MG set, dual pump 20 hp hydraulic unit, spare pineapple & rolls
TDS TECHNOLOGIES custom built anti-stain tunnel w/TDS TECHNOLOGIES tank & controls, SWECO screen, AP AURORA & ROSEDALE centrifugal pumps, LMI metering pumps, SEA METRICS flow meter
4’x10’ slowdown belt,BALDOR 7.5 hp, to NORD 591 rpm reducer
Stud Stackers
LSI & ALOHA MACHINERY hydraulic 9’ over end stud stackers w/69” & 72” 2-arm lumber lowering hoists, (3) sticker magazine racks, 3/4”x1-1/2”x58” stickers, (2) lumber dealing arms, 11’ & 16’ 2-strand 81X infeed transfers, 12’ 4-strand unscramblers, 24’ 2-strand 81X outfeed transfers, 20 hp hydraulic units (stud mill)
SIMPLE SIMON 7’-10’ hydraulic stud stacker, (2) sticker magazines fits 3/4”x1-1/2”x58” stickers up to 60” package, 14’ powered outfeed rollcase w/7”x51-1/2”, 17’ 2-strand infeed transfer, 25 hp hydraulic unit (planer)
Banding Stations
SIMPLE SIMON banding station w/top & side squeeze chute, 18’ hydraulic infeed rollcase w/(7) 7”x51-1/2” rolls, 46’ powered outfeed rollcase w/(14) 7”x51-1/2” rolls, gearhead motor, 7.5 hp hydraulic unit
Hog
JEFFREY 5W5 (55WB) hammer hog, AC 400 hp/1180 rpm, 160 lb super hammers, top infeed, bottom outfeed, WESTINGHOUSE 400 hp starter w/800 amp adjustable trip breaker, s/n: 10819
Chippers
PRECISION 66-18 chipper, 6-knives, WESTINGHOUSE 200 hp/710 rpm, horizontal infeed, bottom outfeed, s/n: C3271
PRECISION 58-15 chipper, 6-knives, WEG 150 hp/890 rpm, horizontal infeed, bottom outfeed, s/n: C1645 (stud mill)
BUSH CHIP MASTER 54A6K chipper, 6-knives, TOSHIBA 150 hp/1160 rpm, horizontal infeed, top discharge, s/n: 74.8.26 (planer)
Bins-Surge Bin-Cylones-Wig Wag-Piping
(3) PEERLESS 30-unit hydraulic chip binsPEERLESS 30-unit hydraulic hog fuel binPEERLESS 30-unit hydraulic shavings bin11’L x 14’W x 20’H dual 14” auger live bottom surge bin(2) 8’, (2) 6’ cyclonesWIG WAG single station rail car loader w/bypass diverter, CP200 rail car
winch, high pressure blowpipeLarge quantity of high or low pressure blowpipe
Chip Screens
BUSH ROTO FLOW BS88, 8’x8’ 3-deck chip screen, s/n: 0974 (stud mill)BUSH ROTO FLOW 66, 6’x6’ 3-deck chip screen, s/n: C97407 (planer)
Vibratory Conveyors-Metal Detectors
PRECISION 18”x21’ paddle type vibratory conveyor w/5’ fiberglass trough (stud mill)
CARRIER 18”x20” paddle type vibratory conveyor w/5’ fiberglass trough (planer)
MDF CR85 metal detector w/44” coil, s/n: 950321MDF CR85 metal detector w/36” coil, s/n: M2-0216
Compressor-Dryer-Air Receiver-Tanner Tank
QNW 1250A rotary screw compressor, 300 hp, s/n: 70563, w/ASEA 300 hp starter
VAN AIR 42 deliquescent dryer, s/n: 980824’x10’ air receiverFROSTO tanner tank
Blowers-Feeders-Silencers
(2) WESTERN PNEUMATICS 721-4500 high pressure blower, 7”x21”, 100 hp, s/n: 316632
SUTORBILT style 8”x14” high pressure blower, 75 hp Approx 60” diameter planer blower, LINCOLN 200 hp2004 WESTERN PNEUMATICS chip feeder, CCW, s/n: FDS885, gearhead
motorRADER 25”x30” chip feeder w/motor to shaft mounted reducer, s/n: 3669RADER 24”x30” chip feeder, CCW w/motor to shaft mounted reducerRADER 20”x20” chip feeder w/gearhead motorRADER 36”x84” silencerSTODDARD D32T-10 silencer, 30”x84”, s/n: 90-881-DSTODDARD L61H-10 silencer, 24”x72”, s/n: 90-881-DKITTELL 0080 silencer, 24”x60”, s/n: BRU10KITTELL 0141 silencer, 20”x60”, s/n: BRU08
Low & High Pressure Boiler System
FEDERAL FLR5464, 15 lb low pressure wood fired water tube type boiler, 595 hp, 19,924 mbh, 64,454 sq ft steam, 15,469 net steam mbh, 2976 sq ft heating surface, 390 cu ft boiler single fuel cell furnace, PACE approx 36” FD fan & 24” ID fans, 35 multi-cone ash collector, s/n: 6741BP
WICKES/WELLONS 200 lb high pressure wood fired water tube type boilerSingle fuel cell w/new refractory, PAC 5FSIC3 FD fan, PACE 7AF-SWSI
ID fan, 35 multi-cone ash collector, order #61653-3, both boilers share WELLONS A-19-50 fuel silo w/dual bottom metering augers, approx 24’ diameter x 40’ high, 2004 WELLONS controls w/SIEMENS SIMATIC touch screens, HAUS CLEVELAND opacity monitoring, AB POWERFLEX 70 drive on metering bin auger, main fuel conveyor, feed water tanks & pumps, compressor, original controls, GE 8000 line MCC, approx 32’H x 54’W x 35’L all steel boiler building
Kilns-Drying Sheds-Rail-Carts-Stickers
(3) WELLONS 32’W x 84’L aluminum double track steam fired dry kilns, 72” aluminum fans, TOSHIBA 7.5 hp/900 rpm, 4” kiln fin pipe, FISHER valves (kiln controls & electrics not complete), 10’x100’ control house, spare kiln coils
(3) 16’H x 30’W x 52’L wood frame dry sheds w/metal roofsApprox 3200’ of kiln rail bolted w/platesApprox (96) square tube kiln carts, 62”x72” center to center on wheels,
96”x120” overallApprox (34) square tube kiln carts, 30”x72” center to center on wheels,
46”x120” overallApprox (100) bundles of 3/4”x1-1/2”x58” laminated stickers(11) Lumber carts
Tilt Hoist-P.E.T.-Hula Saw-Swede
2-arm mechanical tilt hoist w/4’ between arms, 63’long x 72” travel, STERLING 15 hp, w/brake to FALK 68 rpm reducer
Precision end trimmer, 7’-10’ capacity w/22” saws, approx 5 hp/3500 rpm motors, even end rollcase, 6’ & 8’ 2-strand lugged feed thru transfers, (2) CLAUSSEN lumber grade stamps, 18”x13’ clean out conveyor, controls
6’ Hula saw trim station w/18” saws, 5 hp/3500 rpm, gravity rolls, powered outfeed belt
SALEM 16” lumber swede, s/n: 7564017
Filing-Grinding Room Equipment
ARMSTRONG #6 right hand bandsaw sharpener, s/n: 9245ARMSTRONG #4 right hand bandsaw sharpener w/strong arm, s/n: 14884ARMSTRONG #6 stretcher roll, s/n: 6741ARMSTRONG 3-60 stretcher roll, s/n: 10953ARMSTRONG #85 auto tipper, s/n: 16729(2) ARMSTRONG #25 circle saw sharpeners, s/n’s: 16117, 14002WRIGHT W150HDB topper/facer, s/n: C9908IMW 380 side grinderFacer/side grinderARMSTRONG #54 hand gummer, s/n: 12245ACME tall hand gummer, s/n: 5373HANCHETTE size E60 hydraulic travel bed grinder, s/n: GK1490JEFFER JF-200 travel bed profile grinder3-3/4”x44” round saw anvil w/setting stand4-3/4”x16” round saw anvil3-3/4”x14” round saw anvilSaw setting stand; babbit milling machine; babbit pouring press, mold & jigs,
travel bed grinder; (2) ARMSTRONG 5242 swagers; (3) shapers; SIMONDS chipper knives; grinding wheels; jockey grinder; (4) COUGAR CUT TECH 8”x33’ – 2”x.068 gauge resaws (new in crate); (3) 66” round saws; (2) 54” insert tooth round saws; (38) 48” round saws; spare single & double cut bandsaws; STARRETT 4”x18” granite plate
Log Decks & Hauls-Transfers-Conveyors-Rollcases
32’ 5-strand HD84 log deck w/6-arm LS&L, S-drive, GE 10 hp, to FALK 68 rpm reducer
28’ 3-strand H132 log deck, GE 40 hp, to WESTINGHOUSE 68 rpm reducer16’ 8-strand HD log deck, INDUSTRIAL ELECTRIC 200 hp, to FALK 37 rpm
reducer41’ 6”x12” log haul w/4-arm LS&L, INDUSTRIAL ELECTRIC 10 hp/90 rpm 30’ 6”x12” log haul w/SKK 7.5 hp/40 rpm gearhead motor30’ 6”x12” log haul w/BALDOR 10 hp, to FALK 45 rpm reducer24’ 6”x12” log haul w/WEAVER 5 hp, to FALk 45 rpm reducerNumerous transfers to 66’, conveyors to 88’, rollcases to 24’, motors to 400 hp
Look for additional photos on our website: www.murphyauction.com
Look for additional photos on our website: www.murphyauction.com
Electrical
WESTINGHOUSE 200 amp main w/(1) 1600, (2) 1200, (2) 1000, (1) 800 amp adjustable trip breakers
CH UNITROL 9-section MCC w/(38) switches, 300 & 200 hp startersCH UNITROL 6-section MCC w/(27) switches, WESTINGHOUSE 1200 amp
adjustable trip breakerCH UNITROL 6-section MCC w/(22) switchesCH UNITROL 6-section MCC w/(20) switches, 200 hp starterCH UNITROL 6-section MCC w/(19) switchesCH UNITROL 5-section MCC w/(24) switchesCH UNITROL 5-section MCC w/(13) switchesWESTINGHOUSE 5 STAR 5-section MCC w/(12) switches, 400 hp starterCH UNITROL 5-section MCC w/(7) switches, size 6 starter,
WESTINGHOUSE 400 amp breakerCH UNITROL 4-section MCC w/(9) switchesCH UNITROL 4-section MCC w/(7) switchesCH UNITROL 3-section MCC w/(8) switchesCH UNITROL 2-section MCC w/(6) switchesALLEN BRADLEY Bulletin 150 SMC, 250 hpALLEN BRADLEY 1336 Plus II sensorless vector driveALLEN BRADLEY POWERFLEX 70 driveSAFTRONICS SAF DC-12-175-4 solid state driveALLEN BRADLEY 50 hp drive(2) SAFTRONICS GPS variable speed drivesALLEN BRADLEY SLC’s & PLS’sMotors to 400 hp; gearheads; reducers; spare electrical stores; transformers
to 50 kva; lights; heaters; large wire & conduit lot
Sawmill Building
Approx 25,000 sq ft irregular shape, all steel sawmill building
Miscellaneous
(2) 10’x20’ I-beam framed log bunks; hydraulic units to 100 hp; SINKER DAVIS 12” sticker machine w/LINCOLN 40 hp motor; (3) SIGNODE VT16 banders; (6) SIGNODE AM58 banders; (3) SIGNODE 90 psi banders; (5) SIGNODE banding carts; SIGNODE PS119 strapping dispenser; (2) SIGNODE DP23 dispensers; plastic & steel banding; 58AMT clips; WAGNER L712 stack probe moisture meter; (2) WAGNER L612 moisture meters; WAGNER L601-3 moisture meter; (2) calibrating blocks; (3) 600,000, (2) 400,000 & (12) 150,000 btu shop heaters; pallet jack; IDEAL ARC 250 amp welder; GRACO 250-530 pump; 6” pipe vise; double end grinder; eye wash station; intercoms; engine hoist; barrel dolly; barrel pump; fuel & oil tanks; lasers; ladders; clean up tools; safety equipment; heaters; lights; much more!
Rolling Stock
PLYMOUTH diesel locomotive, circa 1912-1915 patent dates on controls, wood trusses & doors in cab, CAT D342 6-cylinder turbo diesel engine, PONY motor, TWIN CITY CF-10051 oil converter, GARDNER DENVER compressor, swing out seats, front & rear couplers
NORTHWEST 800 crane w/50’ boom, log grapples, 40 ton capacity, MURPHY MP21-19811, 6-cylinder engine, 30” tracks, s/n: 19526
CAT 235 heel boom log loader, CAT diesel engine, PIERCE PHLB5758 boom, swivel grapple, s/n: HLB3042HP, 30” triple grouser tracks, s/n: 32K02665
ALLIS CHALMERS HD6G tractor, s/n: 11719 w/ TS-6 Tracto shovel, 6-1/2’ bucket, s/n: 7355, 13” triple grouser tracks, 7-pin drawbar
CAT 966C rubber tire log loader w/MEDFORD pole forks, CAT diesel, 23.5-25 tires, s/n: 76J12710
THUNDERBIRD 940BC log loader, s/n: L9426HYSTER H200H forklift, 20,000 lb capacity, PERKINS
diesel, 182-1/2” 2-stage clear view mast, dual pneumatic tires, 60” forks, s/n: C007P04277C
HYSTER H180H forklift, 18,000 lb capacity, PERKINS diesel, 212-1/2” 2-stage clear view mast, side shift, dual pneumatic tires, 60” forks, s/n: C007P2649Z
CLARK C500-Y180 forklift, 18,000 lb capacity, PERKINS diesel, 210” 2-stage clear view mast, side shift, dual pneumatic tires, 48” forks, s/n: Y1625-31-4950
CLARK approx 18,000 lb forkliftCAT T80DSTR forklift, 8000 lb capacity, propane, 170”
3-stage mast, side shift, solid tires, 48” forks, s/n: 5KB01422
FORD 850 Super Duty T/A dump truck, 222 hp V8 gas, TRANSMATIC auto transmission, PTO, 10.00-20 tires, 215,430 miles
TERMS & CONDITIONS
10% BUYERS PREMIUMPAYMENT: Full payment must be made by no later than 4pm,
Thursday, May 27.A 25% deposit is required by the close of business, auction day.Cash, cashiers check, Master & Visa Cards, wire transfers only.
Personal or company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% depositREMOVAL: No purchase may be removed during the auction
unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
Due to safety & insurance reasons, persons under 12 not admitted.
Washington Auctioneers License #1960
DRIVER DIRECTIONS
From I-84 take Exit 261 turn right onto SR-82/Island Ave. Go left to stay on SR-82/McAllister Rd/Wallowa Lake Hwy, go 10 miles. Keep right to stay on SR-82/Wallowa Lake Hwy, go 30.5 miles, turn right on Lower Diamond Rd. Mill is on the right, watch for signs.
Lodging: Enterprise, OR – 18 miles SE of Wallowa• Best Western 541-426-2000• Ponderosa Motel 541-426-3186• Wilderness Inn 541-426-4535
Joseph, OR – 24 miles SE of Wallowa• A Cowboy River Front Retreat 541-432-1775• Eagle Cap Chalets 541-432-4704• Wallowa Lake Lodge 541-432-9821
LaGrande, OR – 47 miles West of Wallowa• Best Western 541-963-3100• Super 8 541-963-8080• Travelodge 541-963-7116
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
Commercial & Industrial Auctioneers PO BOX 82160 Kenmore, WA 98028
Wallowa Forest Products9am - Wednesday - May 26
Preview 8-4, Tuesday, May 25 or by Appointment
75100 Lower Diamond Road, Wallowa, OR 97885
PUBLIC AUCTION
425-486-1246 • 503-463-4444 • Toll Free 1 800-426-3008www.murphyauction.com
Plymouth Diesel Locomotive
James G. Murphy Inc.
James G. Murphy Inc.
Top Related