ISO Update, Supplement to ISO Focus -- November 2016 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 October to 31 October 2016
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 6 Paper, board and pulps
ISO/CD 7263-1 Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute
ISO/CD 7263-2 Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 2: B-flute
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 24347 Agricultural vehicles — Mechanical connec-tions between towed and towing vehicles — Dimensions of ball-type coupling device (80 mm)
ISO/CD 10517 Powered hand-held hedge trimmers — Safety
TC 28 Petroleum products and related prod-ucts of synthetic or biological origin
ISO/CD 21493 Petroleum products and hydrocarbon solvents — Determination of aniline point equivalent
TC 31 Tyres, rims and valves
ISO/CD 4250-3 Earth-mover tyres and rims — Part 3: Rims
TC 34 Food products
ISO/CD 20636 Fortified milk powders, infant formula and adult nutritionals — Determination of vitamin D by liquid chromatography-mass spectrometry
ISO/CD 21446 Infant formula and adult nutritionals — Deter-mination of trans vitamin K1 content by normal phase high performance liquid chromatography (HPLC)
TC 38 Textiles
ISO/CD 20852 Textiles — Determination of the total heat transfer through textiles in simulated environments
ISO/CD 3175-4 Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing performance when clean-ing and finishing using simulated wetcleaning
TC 46 Information and documentation
ISO/DTR 19815
Information and documentation — Manage-ment of the environmental conditions for archive and library holdings
TC 61 Plastics
ISO/CD 21844 Cellular plastics — Cellulose foam thermal insulation material- Specifications
ISO/CD 21760-1
Adhesives for organic electronic devices — De-termination of water vapour transmission rate — Part 1: Adhesive film preparation method
ISO/CD 21760-2
Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal method
TC 84 Devices for administration of medicinal products and catheters
ISO/CD 7886-4 Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature
ISO/CD 20069 Device change management of combina-tion products for administration of medicinal products
TC 86 Refrigeration and air-conditioning
ISO/CD 18326 Single-duct portable airconditioners and heat pumps — Testing and rating for performance
TC 94 Personal safety -- Protective clothing and equipment
ISO/DIS 16900-2
Respiratory protective devices — Methods of test and test equipment — Part 2: Determina-tion of breathing resistance
TC 107 Metallic and other inorganic coatings
ISO/CD 21164 Metallic and other inorganic coatings — DC magnetron sputtered silver coatings for engi-neering purposes — Measurement of coating adhesion
TC 117 Fans
ISO/CD 12759-2
Fans — Efficiency classification for fans — Part 2: Part load determination
TC 126 Tobacco and tobacco products
ISO/CD 21766 Tobacco and tobacco products — Determi-nation of tobacco-specific nitrosamines in tobacco products — Method using LC-MS/MS
TC 127 Earth-moving machinery
ISO/CD 10968 Earth-moving machinery — Operator's controls
TC 146 Air quality
ISO/CD 17735 Workplace atmospheres — Determination of total isocyanate groups in air using 1-(9-an-thracenylmethyl)piperazine (MAP) reagent and liquid chromatography
ISO/CD 21832 Workplace air — Procedures for determination of metals and metalloids in airborne particles
TC 163 Thermal performance and energy use in the built environment
ISO/DTR 17772-2
Energy performance of buildings — Overall Energy performance Assessment Procedures — Part 2: Guideline for using indoor environ-mental input parameters for the design and assessment of energy performance of buildings
TC 189 Ceramic tile
ISO/CD 10545-2
Ceramic tiles — Part 2: Determination of di-mensions and surface quality
TC 202 Microbeam analysis
2 ISO Update, Supplement to ISO Focus -- November 2016
ISO/CD 20171 Tag image file format for Scanning electron microscopy(TIFF/SEM)
TC 206 Fine ceramics
ISO/CD 19622 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for piezo-electric constant d33 of piezoelectric ceramics by direct quasi-static method
TC 207 Environmental management
ISO/CD 14080 Greenhouse gases management and related activities — Framework and principles for methodologies on climate actions
TC 213 Dimensional and geometrical product specifications and verification
ISO/DTS 21619
Geometrical product specifications (GPS) — Types of documents with GPS specifications
TC 216 Footwear
ISO/CD 20535 Footwear — Test methods for insoles — Di-mensional variation
TC 219 Floor coverings
ISO/CD 23999 Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
TC 220 Cryogenic vessels
ISO/CD 20421-1
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
ISO/CD TR 24514
Activities relating to drinking water and waste-water services --Examples of use of perfor-mance indicators using ISO 24510, 24511 and 24512 standards and related methodologies
TC 258 Project, programme and portfolio management
ISO/CD 21508 Earned value management
ISO/CD 21511 Work breakdown structure (WBS)
TC 268 Sustainable cities and communities
ISO/CD 37157 Smart community infrastructures — Smart transportation for compact cities
TC 292 Security and resilience
ISO/CD 19564 Security and resilience — Product fraud coun-termeasures and control — General principles
ISO/CD 20229 Security and resilience — GuideIines for estab-lishing interoperability among object identifica-tion systems to deter counterfeiting and illicit trade
CASCO Committee on conformity assessment
ISO/IEC DTR 17028
Conformity assessment — Example of a certifi-cation scheme for services
JTC 1 Information technology
ISO/IEC CD 30140-3
Underwater acoustic sensor network — Part 3: Entities and interface
ISO/IEC CD 30140-4
Underwater acoustic sensor network — Part 4: Interoperability
ISO/IEC CD 14543-5-11
Information technology — Home electronic systems (HES) architecture — Part 5-11: Intelli-gent grouping and resource sharing — Remote user interface
ISO/IEC CD 14543-5-12
Information technology — Home electronic systems (HES) architecture — Part 5-12: Intelli-gent grouping and resource sharing — Remote access test and verification
ISO/IEC CD 14543-5-101
Information technology — Home electronic systems (HES) architecture — Part 5-101: Intel-ligent grouping and resource sharing remote AV access profile
ISO/IEC CD 20248
Automatic identification and data capture tech-niques — Data structures — Digital Signature meta structure
ISO/IEC CD 20071-23
Information technology — User interface component accessibility — Part 23: Guidance on the visual presentation of audio information (including captions and subtitles)
ISO/IEC CD 24752-8
Information technology — User interfaces — Universal remote — Part 8: User interface resource framework
DIS circulated
Period from 01 October to 31 October 2016
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
IIW International Institute of Welding
ISO/DIS 14271 * Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
2017-01-17
(Revision of ISO 14271:2011, ISO 14271:2011/Cor 1:2012)
TC 12 Quantities and units
ISO/DIS 80000-4
* Quantities and units — Part 4: Mechanics
2017-01-13
(Revision of ISO 80000-4:2006)
TC 22 Road vehicles
ISO 17949:2013/DAmd 1
* Impact test procedures for road vehicles — Seating and position-ing procedures for anthropomor-phic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions — Amendment 1
2017-01-06
ISO 2575:2010/DAmd 6
* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 6
2017-01-13
ISO 2575:2010/DAmd 7
* Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 7
2017-01-13
TC 23 Tractors and machinery for agriculture and forestry
ISO Update, Supplement to ISO Focus -- November 2016 3
ISO/DIS 11783-6
* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 6: Virtual terminal
2017-01-02
(Revision of ISO 11783-6:2014)
TC 27 Solid mineral fuels
ISO/DIS 7404-4
* Methods for the petrographic analysis of coals — Part 4: Method of determining micro-lithotype, carbominerite and minerite composition
2016-12-27
(Revision of ISO 7404-4:1988)
TC 28 Petroleum products and re-lated products of synthetic or biological origin
ISO/DIS 5165 * Petroleum products — Deter-mination of the ignition quality of diesel fuels — Cetane engine method
2016-12-27
(Revision of ISO 5165:1998)
TC 37 Terminology and other language and content resources
ISO/DIS 18841 * Interpreting services — General requirements and recommendations
2017-01-18
ISO/DIS 20108 * Simultaneous interpreting — Quality and transmission of sound and image input - Requirements
2017-01-13
ISO/DIS 20228 * Legal interpreting
2017-01-18
TC 39 Machine tools
ISO/DIS 3875.2
* Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
2016-12-02
(Revision of ISO 3875:2004)
TC 44 Welding and allied processes
ISO/DIS 13918 * Welding — Studs and ceramic ferrules for arc stud welding
2017-01-04
(Revision of ISO 13918:2008)
ISO/DIS 14731 * Welding coordination — Tasks and responsibilities
2016-12-27
(Revision of ISO 14731:2006)
TC 45 Rubber and rubber products
ISO 23233:2016/DAmd 1
* Rubber, vulcanized or ther-moplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc — Amendment 1
2016-12-28
ISO/DIS 32100 * Rubber- or plastics-coated fabrics — Physical and mechani-cal tests — Determination of flex resistance by the flexometer method
2017-01-10
(Revision of ISO 32100:2010)
TC 58 Gas cylinders
ISO/DIS 18119.2
* Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Peri-odic inspection and testing
2016-12-19
(Revision of ISO 6406:2005, ISO 10461:2005, ISO 10461:2005/Amd 1:2006)
TC 59 Buildings and civil engi-neering works
ISO/DIS 6707-1
* Buildings and civil engineering works — Vocabulary — Part 1: General terms
(Revision of ISO 6707-1:2014)
ISO/DIS 6707-2
* Buildings and civil engineering works — Vocabulary — Part 2: Communication and contract terms
(Revision of ISO 6707-2:2014)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 18796-1
* Petroleum, petrochemicals and natural gas industries — Internal coating and lining of carbon steel process vessels — Part 1: Technical requirements
ISO/DIS 35103 * Petroleum and natural gas industries — Arctic operations — Environmental monitoring
2016-12-29
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use
ISO/DIS 6710 * Single-use containers for venous blood specimen collection
2017-01-11
(Revision of ISO 6710:1995)
ISO/DIS 15378 * Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
2016-12-27
(Revision of ISO 15378:2015)
TC 108 Mechanical vibration, shock and condition monitoring
ISO/DIS 16079-1
* Condition monitoring and diag-nostics of wind turbines — Part 1: General guidelines
2016-12-30
TC 118 Compressors and pneu-matic tools, machines and equipment
ISO/DIS 8573-2
* Compressed air — Contaminant measurement — Part 2: Oil aero-sol content
2017-01-09
(Revision of ISO 8573-2:2007)
TC 120 Leather
ISO/DIS 15115 * Leather — Vocabulary
2017-01-05
TC 121 Anaesthetic and respiratory equipment
4 ISO Update, Supplement to ISO Focus -- November 2016
ISO/DIS 80601-2-61
* Medical electrical equipment — Part 2-61: Particular require-ments for basic safety and essential performance of pulse oximeter equipment
2017-01-16
(Revision of ISO 80601-2-61:2011)
ISO 10079-1:2015/DAmd 1
* Medical suction equipment — Part 1: Electrically powered suc-tion equipment — Amendment 1: Changes to requirements for operating at extremes of temperature
2016-12-22
TC 122 Packaging
ISO/DIS 19809 * Packaging — Accessible design — Information and marking
2017-01-12
TC 134 Fertilizers and soil conditioners
ISO/DIS 7409 * Fertilizers — Marking — Presen-tation and declarations
2017-01-04
(Revision of ISO 7409:1984)
TC 135 Non-destructive testing
ISO/DIS 19835 * Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes
2017-01-04
TC 145 Graphical symbols
ISO/DIS 16069 * Graphical symbols — Safety signs — Safety way guidance systems (SWGS)
2017-01-18
(Revision of ISO 16069:2004)
TC 154 Processes, data ele-ments and documents in commerce, industry and administration
ISO/DIS 14533-3
* Processes, data elements and documents in commerce, indus-try and administration — Long term signature profiles — Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
2016-12-28
TC 156 Corrosion of metals and alloys
ISO/DIS 19280 * Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crev-ice geometries in ferric chloride solution
2017-01-12
TC 172 Optics and photonics
ISO/DIS 8596 * Ophthalmic optics — Visual acuity testing — Standard and clinical optotypes and their presentation
2017-01-05
(Revision of ISO 8596:2009)
TC 182 Geotechnics
ISO/DIS 22477-4
* Geotechnical investigation and testing — Testing of geotechni-cal structures — Part 4: Testing of piles dynamic load testing
2017-01-13
TC 190 Soil quality
ISO/DIS 18400-104
* Soil quality — Sampling — Part 104: Strategies
2016-12-29
(Revision of ISO 10381-8:2006, ISO 10381-1:2002, ISO 10381-5:2005, ISO 10381-6:2009)
TC 202 Microbeam analysis
ISO/DIS 19463 * Microbeam analysis — Electron probe microanalyser (EPMA) — Guidelines for performing quality assurance procedures
2017-01-03
TC 204 Intelligent transport systems
ISO/DIS 16461 * Intelligent transport systems — Criteria for privacy and integrity protection
2016-12-27
TC 209 Cleanrooms and associat-ed controlled environments
ISO/DIS 14644-12
* Cleanrooms and associated con-trolled environments — Part 12: Specifications for monitoring air cleanliness by nanoscale particle concentration
2017-01-19
TC 211 Geographic information/Geomatics
ISO/DIS 19127 * Geographic information — Geo-detic register
2017-01-06
(Revision of ISO/TS 19127:2005)
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/DIS 20170 * Geometrical product specifica-tions (GPS) — Decomposition of geometrical characteristics for manufacturing control
2016-12-27
TC 221 Geosynthetics
ISO/DIS 13426-1
* Geotextiles and geotextiles-related products — Strength of internal structural junctions — Part 1: Geocells
2017-01-04
(Revision of ISO 13426-1:2003)
TC 249 Traditional chinese medicine
ISO/DIS 20333.2
* Traditional Chinese medicine — Coding rules for chinese medicines in supply chain management
2016-11-29
TC 255 Biogas
ISO/DIS 20675 * Biogas — Biogas production, conditioning, upgrading and utilization — Terms, definitions and classification scheme
2017-01-19
TC 261 Additive manufacturing
ISO/ASTM DIS 52901.2
* Additive manufacturing — Gen-eral principles — Requirements for purchased AM parts
2016-12-19
TC 268 Sustainable cities and communities
ISO/DIS 37154 * Smart community infrastructures — Best practice guidelines for transportation
2016-12-27
TC 281 Fine Bubble Technology
ISO Update, Supplement to ISO Focus -- November 2016 5
ISO/DIS 20480-1
* Fine bubble technology - Gen-eral principles for usage and measurement of fine bubbles — Part 1: Terminology
2017-01-17
JTC 1 Information technology
ISO/IEC 14651:2016/DAmd 1
* Information technology — In-ternational string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering — Amendment 1
2017-01-13
ISO/IEC DIS 19770-1
* Information technology — IT asset management — Part 1: IT asset management systems — Requirements
2016-12-30
(Revision of ISO/IEC 19770-1:2012)
ISO/IEC DIS 19770-4
* Information technology — IT as-set management — Part 4: Re-source utilization measurement
2017-01-13
ISO/IEC DIS 16963
* Information technology — Digi-tally recorded media for informa-tion interchange and storage — Test method for the estimation of lifetime of optical disks for long-term data storage
2017-01-02
(Revision of ISO/IEC 16963:2015)
ISO/IEC DIS 29121
* Information technology — Digi-tally recorded media for informa-tion interchange and storage — Data migration method for optical disks for long-term data storage
2017-01-04
(Revision of ISO/IEC 29121:2013)
ISO/IEC DIS 14543-5-8
* Information technology — Home electronic systems (HES) archi-tecture — Part 5-8: Intelligent grouping and resource sharing for Class 2 and Class 3 — Re-mote access core protocol
2017-01-13
ISO/IEC DIS 14543-5-9
* Information technology — Home electronic systems (HES) archi-tecture — Part 5-9: Intelligent grouping and resource sharing for class 2 and class 3 — Re-mote access service platform
2017-01-13
ISO/IEC DIS 10118-3
* Information technologies — Security techniques — Hash-functions — Part 3: Dedicated hash-functions
2017-01-13
(Revision of ISO/IEC 10118-3:2004)
ISO/IEC 14496-10:2014/DAmd 4
* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 4: Progressive high 10 profile and additional VUI code points and supplemental enhancement information
2017-01-04
ISO/IEC 23000-13/DAmd 1
* Information technology - Mul-timedia application format (MPEG-A) — Part 13: Aug-mented reality application format — Amendment 1: Reference software and conformance for ARAF
2017-01-13
ISO/IEC 23001-8:2016/DAmd 1
* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 1: Ad-ditional code points for colour description
2017-01-10
ISO/IEC 23003-4:2015/DAmd 2
* Information technology — MPEG audio technologies — Part 4: Dy-namic Range Control — Amend-ment 2: Reference software
2017-01-04
ISO/IEC 23008-12/DAmd 1
* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 12: Image file format — Amendment 1: Sup-port for AVC, JPEG and layered coding of images
2017-01-04
ISO/IEC DIS 20382-1
* Information technology — User interfaces — Face-to-face speech translation — Part 1: User interface
2017-01-06
ISO/IEC DIS 20382-2
* Information technology — User interface — Face-to-face speech translation — Part 2: System architecture and functional components
2017-01-06
ISO/IEC DIS 30107-2
* Information technology — Bio-metric presentation attack detec-tion — Part 2: Data formats
2017-01-04
ISO/IEC DIS 30107-3
* Information technology — Biometric presentation attack detection — Part 3: Testing and reporting
2017-01-05
FDIS circulated
Period from 01 October to 31 October 2016
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 24 Particle characterization including sieving
ISO/FDIS 22412
* Particle size analysis — Dynamic light scattering (DLS)
2016-12-06
(Revision of ISO 13321:1996, ISO 22412:2008)
TC 29 Small tools
ISO/FDIS 6789-1
* Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for certificates of conformance
2016-12-13
(Revision of ISO 6789:2003)
6 ISO Update, Supplement to ISO Focus -- November 2016
ISO/FDIS 6789-2
* Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainly
2016-12-13
(Revision of ISO 6789:2003)
TC 34 Food products
ISO/FDIS 6579-1.2
* Microbiology of the food chain — Horizontal method for the detection, enumeration and se-rotyping of Salmonella — Part 1: Detection of Salmonella spp.
(Revision of ISO 6579:2002, ISO 6579:2002/Cor 1:2004, ISO 6579:2002/Amd 1:2007)
ISO/FDIS 6887-1
* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1: General rules for the preparation of the initial suspension and decimal dilutions
2016-12-13
(Revision of ISO 6887-1:1999)
ISO/FDIS 6887-2
* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 2: Specific rules for the preparation of meat and meat products
2016-12-13
(Revision of ISO 6887-2:2003)
ISO/FDIS 6887-3
* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 3: Specific rules for the preparation of fish and fishery products
2016-12-13
(Revision of ISO 6887-3:2003)
ISO/FDIS 6887-4
* Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 4: Specific rules for the preparation of mis-cellaneous products
2016-12-13
(Revision of ISO 6887-4:2003, ISO 6887-4:2003/Cor 1:2004, ISO 6887-4:2003/Amd 1:2011)
ISO/FDIS 663 * Animal and vegetable fats and oils — Determination of insoluble impurities content
2017-01-06
(Revision of ISO 663:2007)
ISO/FDIS 3960 * Animal and vegetable fats and oils — Determination of peroxide value — Iodometric (visual) end-point determination
2017-01-06
(Revision of ISO 3960:2007)
ISO/FDIS 6883 * Animal and vegetable fats and oils — Determination of con-ventional mass per volume (litre weight in air)
2017-01-06
(Revision of ISO 6883:2007)
ISO/FDIS 8534 * Animal and vegetable fats and oils — Determination of water content — Karl Fischer method (pyridine free)
2017-01-06
(Revision of ISO 8534:2008)
ISO/FDIS 15774
* Animal and vegetable fats and oils — Determination of cad-mium content by direct graphite furnace atomic absorption spectrometry
2017-01-12
(Revision of ISO 15774:2000)
TC 42 Photography
ISO/FDIS 12233
* Photography — Electronic still picture imaging — Resolution and spatial frequency responses
2016-12-20
(Revision of ISO 12233:2014)
TC 43 Acoustics
ISO/FDIS 7029 * Acoustics — Statistical distribu-tion of hearing thresholds related to age and gender
2016-12-13
(Revision of ISO 7029:2000)
ISO/FDIS 11819-2
* Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method
2016-12-16
TC 44 Welding and allied processes
ISO/FDIS 9013 * Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
2016-11-30
(Revision of ISO 9013:2002)
TC 54 Essential oils
ISO/FDIS 4730 * Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
2016-12-07
(Revision of ISO 4730:2004)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/FDIS 16639
* Surveillance of the activity con-centrations of airborne radioac-tive substances in the workplace of nuclear facilities
2016-12-12
ISO/FDIS 18310-1
* Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation — Part 1: During the hospitalization
2016-12-11
TC 107 Metallic and other inorgan-ic coatings
ISO/FDIS 8401 * Metallic coatings — Review of methods of measurement of ductility
2017-01-05
(Revision of ISO 8401:1986)
TC 127 Earth-moving machinery
ISO/FDIS 8643 * Earth-moving machinery — Hy-draulic excavator and backhoe loader lowering control device — Requirements and tests
2016-12-19
(Revision of ISO 8643:1997)
TC 130 Graphic technology
ISO/FDIS 19594
* Graphic technology — Test method for the determination of the binding strength for perfect-bound products — Page-pull test working upwards
2016-12-06
TC 135 Non-destructive testing
ISO Update, Supplement to ISO Focus -- November 2016 7
ISO/FDIS 16946
* Non-destructive testing — Ultra-sonic testing — Specification for step wedge calibration block
2017-01-03
(Revision of ISO 16946:2015)
ISO/FDIS 10880
* Non-destructive testing — In-frared thermographic testing — General principles
2016-12-07
ISO/FDIS 18251-1
* Non-destructive testing — In-frared thermography — Part 1: Characteristics of system and equipment
2016-12-07
TC 136 Furniture
ISO/FDIS 24496
* Office furniture — Office chairs — Methods for the determination of dimensions
2016-12-13
(Revision of ISO/TR 24496:2012)
TC 163 Thermal performance and energy use in the built environment
ISO/FDIS 17772-1
* Energy performance of buildings — Indoor environmental Quality — Part 1: Indoor environmental input parameters for the design and assessment of energy per-formance of buildings
ISO/FDIS 52000-1
* Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
(Revision of ISO/TR 16344:2012, ISO 16346:2013)
ISO/FDIS 52003-1
* Energy performance of build-ings — Indicators, requirements, ratings and certificates — Part 1: General aspects and ap-plication to the overall energy performance
(Revision of ISO 16343:2013)
ISO/FDIS 6946 * Building components and build-ing elements — Thermal resist-ance and thermal transmittance — Calculation methods
(Revision of ISO 6946:2007)
ISO/FDIS 10077-1
* Thermal performance of win-dows, doors and shutters — Cal-culation of thermal transmittance — Part 1: General
(Revision of ISO 10077-1:2006, ISO 10077-1:2006/Cor 1:2009)
ISO/FDIS 10077-2
* Thermal performance of win-dows, doors and shutters — Cal-culation of thermal transmittance — Part 2: Numerical method for frames
(Revision of ISO 10077-2:2012, ISO 10077-2:2012/Cor 1:2012)
ISO/FDIS 10211
* Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
(Revision of ISO 10211:2007)
ISO/FDIS 12631
* Thermal performance of curtain walling — Calculation of thermal transmittance
(Revision of ISO 12631:2012)
ISO/FDIS 13370
* Thermal performance of build-ings — Heat transfer via the ground — Calculation methods
(Revision of ISO 13370:2007)
ISO/FDIS 13786
* Thermal performance of building components — Dynamic thermal characteristics — Calculation methods
(Revision of ISO 13786:2007)
ISO/FDIS 13789
* Thermal performance of build-ings — Transmission and ventila-tion heat transfer coefficients — Calculation method
(Revision of ISO 13789:2007)
ISO/FDIS 14683
* Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values
(Revision of ISO 14683:2007)
ISO/FDIS 52010-1
* Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data for energy calculations
ISO/FDIS 52016-1
* Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent head loads — Part 1: Calculation procedures
ISO/FDIS 52017-1
* Energy performance of build-ings — Sensible and latent heat loads and internal temperatures — Part 1: Generic calculation procedures
(Revision of ISO 13791:2012)
ISO/FDIS 52018-1
* Energy performance of build-ings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 1: Overview of options
ISO/FDIS 52022-1
* Energy performance of buildings — Thermal, solar and daylight properties of building compo-nents and elements — Part 1: Simplified calculation method of the solar and daylight character-istics for solar protection devices combined with glazing
ISO/FDIS 52022-3
* Energy performance of buildings — Thermal, solar and daylight properties of building compo-nents and elements — Part 3: Detailed calculation method of the solar and daylight character-istics for solar protection devices combined with glazing
ISO/FDIS 17738-1
* Thermal insulation products — Exterior insulation and finish systems — Part 1: Materials and systems
2016-12-13
TC 164 Mechanical testing of metals
ISO/FDIS 12106
* Metallic materials — Fatigue testing — Axial-strain-controlled method
2016-12-15
(Revision of ISO 12106:2003)
TC 190 Soil quality
ISO/FDIS 14869-3
* Soil quality — Dissolution for the determination of total element content — Part 3: Dissolution with hydrofluoric, hydrochloric and nitric acids using pressur-ised microwave technique
2016-12-16
TC 198 Sterilization of health care products
8 ISO Update, Supplement to ISO Focus -- November 2016
ISO/FDIS 11138-1
* Sterilization of health care prod-ucts — Biological indicators — Part 1: General requirements
2016-12-18
(Revision of ISO 11138-1:2006)
ISO/FDIS 11138-2
* Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes
2016-12-18
(Revision of ISO 11138-2:2006)
ISO/FDIS 11138-3
* Sterilization of health care products — Biological indicators — Part 3: Biological indica-tors for moist heat sterilization processes
2016-12-18
(Revision of ISO 11138-3:2006)
ISO/FDIS 11138-4
* Sterilization of health care prod-ucts — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes
2016-12-18
(Revision of ISO 11138-4:2006)
ISO/FDIS 11138-5
* Sterilization of health care products — Biological indicators — Part 5: Biological indica-tors for low-temperature steam and formaldehyde sterilization processes
2016-12-18
(Revision of ISO 11138-5:2006)
TC 205 Building environment design
ISO/FDIS 16484-5
* Building automation and control systems (BACS) — Part 5: Data communication protocol
2016-11-29
(Revision of ISO 16484-5:2014)
TC 206 Fine ceramics
ISO/FDIS 19722
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of photocatalytic activity on semiconducting pho-tocatalytic materials by dissolved oxygen consumption
2016-12-13
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/FDIS 1938-2
* Geometrical product specifica-tions (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
2016-11-30
TC 215 Health informatics
ISO/IEEE 11073-10101:2004/FDAmd 1
* Health informatics — Point-of-care medical device communica-tion — Part 10101: Nomencla-ture — Amendment 1: Additional definitions
2017-03-10
ISO/FDIS 21298
* Health informatics — Functional and structural roles
2016-12-19
(Revision of ISO/TS 21298:2008)
TC 249 Traditional chinese medicine
ISO/FDIS 19465
* Traditional Chinese medicine — Categories of traditional Chinese medicine (TCM) clinical termino-logical systems
2016-11-29
ISO/FDIS 19824
* Traditional Chinese medicine — Schisandra chinensis (Turcz.) Baill seeds and seedlings
2016-12-06
ISO/FDIS 20408
* Traditional Chinese medicine — Panax notoginseng seeds and seedlings
2016-12-06
IULTCS International Union of Leather Technologists and Chemists Societies
ISO/FDIS 2418 * Leather — Chemical, physical and mechanical and fastness tests — Sampling location
2016-12-16
(Revision of ISO 2418:2002)
ISO/FDIS 17075-1
* Leather — Chemical determina-tion of chromium(VI) content in leather — Part 1: Colorimetric method
2016-11-29
(Revision of ISO 17075:2007)
ISO/FDIS 17075-2
* Leather — Chemical determina-tion of chromium(VI) content in leather — Part 2: Chromato-graphic method
2016-11-29
(Revision of ISO 17075:2007)
ISO/FDIS 17232
* Leather — Physical and mechan-ical tests — Determination of heat resistance of patent leather
2016-12-03
(Revision of ISO 17232:2006)
ISO/FDIS 17233
* Leather — Physical and me-chanical tests — Determination of cold crack temperature of surface coatings
2016-12-02
(Revision of ISO 17233:2002)
JTC 1 Information technology
ISO/IEC/IEEE FDIS 8802-3
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 3: Standard for Ethernet
2017-02-25
(Revision of ISO/IEC/IEEE 8802-3:2014)
ISO/IEC FDIS 14776-262
* Information technology — Small computer system interface (SCSI) — Part 262: SAS protocol layer - 2 (SPL-2)
2016-12-10
ISO/IEC FDIS 19798
* Information technology — Office equipment — Method for the determination of toner cartridge yield for colour printers and multi-function devices that con-tain printer components
2016-11-29
(Revision of ISO/IEC 19798:2007)
ISO/IEC FDIS 14496-15
* Information technology — Cod-ing of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format
2016-12-09
(Revision of ISO/IEC 14496-15:2014, ISO/IEC 14496-15:2014/CD Cor 1, ISO/IEC 14496-15:2014/Cor 1:2015, ISO/IEC 14496-15:2014/PDAM 1, ISO/IEC 14496-15:2014/PDAM 2)
ISO Update, Supplement to ISO Focus -- November 2016 9
ISO/IEC FDIS 23008-5
* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 5: Reference software for high efficiency video coding
2016-11-29
(Revision of ISO/IEC 23008-5:2015, ISO/IEC 23008-5:2015/Amd 1:2016, ISO/IEC 23008-5:2015/Amd 2:2016, ISO/IEC 23008-5:2015/DAmd 3, ISO/IEC 23008-5:2015/DAmd 4)
ISO/IEC FDIS 23009-5
* Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 5: Server and network assisted DASH (SAND)
2016-12-09
ISO/IEC FDIS 30122-2
* Information technology — User interfaces — Voice commands — Part 2: Constructing and testing
2016-12-01
ISO/IEC FDIS 30122-3
* Information technology — User interfaces — Voice commands — Part 3: Translation and localization
2016-12-01
ISO/IEC FDIS 2382-37
* Information technology — Vo-cabulary — Part 37: Biometrics
2016-12-14
(Revision of ISO/IEC 2382-37:2012)
ISO/IEC FDIS 24779-4
* Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pic-tograms, icons and symbols for use with biometric systems — Part 4: Fingerprint applications
2016-12-01
Standards published
New International Standards published between 01 October and 31 October 2016
* Available in English only
** French version of standard previously published in English only
Price
group
PC 278 Anti-bribery management systems
ISO 37001:2016
* Anti-bribery management systems — Requirements with guidance for use
F
TC 8 Ships and marine technology
ISO 16707:2016
* Ships and marine technology — Ma-rine evacuation systems — Determina-tion of capacity
D
TC 10 Technical product documentation
ISO 12756:2016
Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary
A
ISO 14145-1:2016
Roller ball pens and refills — Part 1: General use
B
ISO 27668-1:2016
Gel ink ball pens and refills — Part 1: General use
B
TC 17 Steel
ISO/TS 4949:2016
* Steel names based on letter symbols
B
ISO/TR 21074:2016
* Application of ISO 5725 for the deter-mination of repeatability and repro-ducibility of precision tests performed in standardization work for chemical analysis of steel
C
TC 20 Aircraft and space vehicles
ISO 23748:2016
* Aerospace series — O-ring grooves — Dimensions
E
TC 21 Equipment for fire protection and fire fighting
ISO 16852:2016
Flame arresters — Performance requirements, test methods and limits for use
F
TC 22 Road vehicles
ISO 16845-1:2016
* Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link layer and physical signalling
H
ISO 17987-6:2016
* Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol con-formance test specification
G
ISO 18541-4:2015
Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 4: Conform-ance test
G
ISO/TR 7637-5:2016
* Road vehicles — Electrical distur-bances from conduction and coupling — Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637
F
ISO 19364:2016
* Passenger cars — Vehicle dynamic simulation and validation — Steady-state circular driving behaviour
C
ISO 12156-1:2016
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method
C
ISO 19689:2016
* Motorcycles and mopeds — Commu-nication between vehicle and external equipment for diagnostics — Diag-nostic connector and related electrical circuits, specification and use
B
10 ISO Update, Supplement to ISO Focus -- November 2016
ISO 17488:2016
* Road vehicles — Transport information and control systems — Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
G
ISO 16380:2014/Amd 1:2016
* Road vehicles — Blended fuels refuel-ling connector — Amendment 1
XZ
TC 23 Tractors and machinery for agri-culture and forestry
ISO 5395-2:2013/Amd 1:2016
Garden equipment — Safety require-ments for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 1: OPC, cutting means, pressurized hoses
XZ
TC 27 Solid mineral fuels
ISO 13909-4:2016
* Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples
E
TC 28 Petroleum products and related products of synthetic or biologi-cal origin
ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives
B
ISO 10370:2014
Petroleum products — Determination of carbon residue — Micro method
B
TC 29 Small tools
ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
D
ISO 2540:2016 Centre drills for centre holes with pro-tecting chamfer — Type B
A
ISO 2541:2016 Centre drills for centre holes with radius form — Type R
A
ISO 2584:2016 Cylindrical cutters with plain bore and key drive — Metric series
A
ISO 3291:2016 Extra-long Morse taper shank twist drills
A
ISO 3292:2016 Extra-long parallel shank twist drills
A
ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
A
ISO 4204:2016 Countersinks, 90°, with Morse taper shanks and detachable pilots
A
ISO 4205:2016 Countersinks, 90°, with parallel shanks and solid pilots
A
ISO 4206:2016 Counterbores with parallel shanks and solid pilots
A
ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots
A
ISO 7079:2016 Core drills with parallel shanks and with Morse taper shanks
B
ISO 12197:2016
Woodruff keyseat cutters — Dimensions
A
ISO 4230:2016 Hand- and machine-operated circular screwing dies for taper pipe threads — R series
A
ISO 4231:2016 Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
A
TC 37 Terminology and other language and content resources
ISO 24624:2016
Language resource management — Transcription of spoken language
E
TC 38 Textiles
ISO 18264:2016
Textile slings — Lifting slings for gen-eral purpose lifting operations made from fibre ropes — High modulus polyethylene (HMPE)
E
TC 41 Pulleys and belts (including veebelts)
ISO 9856:2016 Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus
A
ISO 15236-1:2016
Steel cord conveyor belts — Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
C
TC 42 Photography
ISO 18935:2016
* Imaging materials — Colour images — Determination of water resistance of printed colour images
B
TC 44 Welding and allied processes
ISO 17638:2016
Non-destructive testing of welds — Magnetic particle testing
C
ISO 15614-7:2016
Specification and qualification of weld-ing procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
D
TC 45 Rubber and rubber products
ISO 1401:2016 Rubber hoses for agricultural spraying
B
ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification
B
ISO Update, Supplement to ISO Focus -- November 2016 11
ISO 4081:2016 * Rubber hoses and tubing for cool-ing systems for internal-combustion engines — Specification
C
ISO 7233:2016 Rubber and plastics hoses and hose assemblies — Determination of resist-ance to vacuum
A
ISO 7326:2016 Rubber and plastics hoses — Assess-ment of ozone resistance under static conditions
B
ISO 7751:2016 Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure
A
ISO 8331:2016 Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance
C
ISO 23337:2016
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine
B
ISO 23529:2016
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
C
ISO 1304:2016 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number
C
ISO 1434:2016 Natural rubber in bales — Amount of bale coating — Determination
A
ISO 11344:2016
* Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
D
ISO 4674-1:2016
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
B
TC 54 Essential oils
ISO 3848:2016 Essential oil of citronella, Java type
B
TC 59 Buildings and civil engineering works
ISO 19208:2016
* Framework for specifying performance in buildings
D
TC 60 Gears
ISO 6336-5:2016
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
F
TC 61 Plastics
ISO 1043-3:2016
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
B
ISO 15512:2016
Plastics — Determination of water content
D
ISO 29664:2010
Plastics — Artificial weathering includ-ing acidic deposition
C
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 14224:2016
* Petroleum, petrochemical and natural gas industries — Collection and ex-change of reliability and maintenance data for equipment
H
ISO 16440:2016
* Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
F
ISO 19901-5:2016
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction
G
ISO 16904:2016
Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals
G
TC 69 Applications of statistical methods
ISO 13528:2015
Statistical methods for use in pro-ficiency testing by interlaboratory comparison
H
TC 70 Internal combustion engines
ISO 8528-13:2016
Reciprocating internal combustion engine driven alternating current gen-erating sets — Part 13: Safety
F
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 19044:2016
* Test methods for fibre-reinforced cementitious composites — Load-displacement curve using notched specimen
B
TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use
ISO 1135-3:2016
Transfusion equipment for medical use — Part 3: Blood-taking sets for single use
B
ISO 8871-5:2016
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
B
TC 83 Sports and other recreational facilities and equipment
ISO 20957-9:2016
Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods
C
TC 89 Wood-based panels
ISO 17064:2016
Wood-based panels — Fibreboard, particleboard and oriented strand board (OSB) — Vocabulary
A
TC 92 Fire safety
ISO 24678-6:2016
Fire safety engineering — Require-ments governing algebraic formulae — Part 6: Flashover related phenomena
D
12 ISO Update, Supplement to ISO Focus -- November 2016
TC 94 Personal safety -- Protective clothing and equipment
ISO 374-1:2016
* Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks
B
ISO 374-5:2016
* Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks
A
ISO 20471:2013/Amd 1:2016
* High visibility clothing — Test methods and requirements — Amendment 1
XZ
ISO 16900-5:2016
Respiratory protective devices — Methods of test and test equipment — Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
E
TC 96 Cranes
ISO 4306-3:2016
Cranes — Vocabulary — Part 3: Tower cranes
A
TC 106 Dentistry
ISO 13078-2:2016
Dentistry — Dental furnace — Part 2: Test method for evaluation of furnace programme via firing glaze
B
ISO 3964:2016 Dentistry — Coupling dimensions for handpiece connectors
B
ISO 9173-1:2016
Dentistry — Extraction forceps — Part 1: General requirements
A
ISO 16409:2016
Dentistry — Oral care products — Manual interdental brushes
B
ISO 14801:2016
Dentistry — Implants — Dynamic load-ing test for endosseous dental implants
C
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10326-1:2016
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements
D
TC 110 Industrial trucks
ISO 18063-1:2016
* Rough-terrain trucks — Visibility — Test methods and their verification — Part 1: Variable-reach trucks
C
TC 119 Powder metallurgy
ISO 3928:2016 * Sintered metal materials, excluding hardmetals — Fatigue test pieces
B
TC 121 Anaesthetic and respiratory equipment
ISO 18190:2016
Anaesthetic and respiratory equipment — General requirements for airways and related equipment
D
TC 122 Packaging
ISO 21067-1:2016
* Packaging — Vocabulary — Part 1: General terms
A
TC 127 Earth-moving machinery
ISO 14990-1:2016
* Earth-moving machinery — Electrical safety of machines utilizing elec-tric drives and related components and systems — Part 1: General requirements
G
ISO 14990-2:2016
* Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 2: Particular re-quirements for externally-powered machines
C
ISO 14990-3:2016
* Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 3: Particular require-ments for self-powered machines
C
TC 131 Fluid power systems
ISO 11171:2016
Hydraulic fluid power — Calibration of automatic particle counters for liquids
G
ISO 21018-4:2016
Hydraulic fluid power — Monitoring the level of particulate contamination in the fluid — Part 4: Use of the light extinc-tion technique
B
TC 145 Graphical symbols
ISO 7010:2011/Amd 7:2016
* Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 7
XZ
TC 146 Air quality
ISO 22262-3:2016
Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray diffraction method
F
TC 149 Cycles
ISO 4210-2:2015
Cycles — Safety requirements for bi-cycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
E
ISO 4210-6:2015
Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
D
ISO 8098:2014 Cycles — Safety requirements for bicycles for young children
F
TC 150 Implants for surgery
ISO 5832-3:2016
Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
B
TC 164 Mechanical testing of metals
ISO 14577-4:2016
Metallic materials — Instrumented in-dentation test for hardness and materi-als parameters — Part 4: Test method for metallic and non-metallic coatings
D
ISO 148-1:2016
Metallic materials — Charpy pendulum impact test — Part 1: Test method
E
ISO Update, Supplement to ISO Focus -- November 2016 13
ISO 148-2:2016
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
F
ISO 148-3:2016
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
C
TC 170 Surgical instruments
ISO 7153-1:2016
Surgical instruments — Materials — Part 1: Metals
C
TC 172 Optics and photonics
ISO 12870:2016
Ophthalmic optics — Spectacle frames — Requirements and test methods
D
IEC 80601-2-58:2014/Amd 1:2016
* Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery — Amendment 1: Proposed Horizontal Standard
XZ
TC 173 Assistive products for persons with disability
ISO 9999:2016 Assistive products for persons with disability — Classification and terminology
H
ISO 12505-2:2016
* Skin barrier for ostomy aids — Test methods — Part 2: Wet integrity and adhesive strength
B
TC 176 Quality management and quality assurance
ISO/TS 9002:2016
* Quality management systems — Guidelines for the application of ISO 9001:2015
F
TC 182 Geotechnics
ISO 17892-4:2016
Geotechnical investigation and test-ing — Laboratory testing of soil — Part 4: Determination of particle size distribution
E
ISO 18674-2:2016
* Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measure-ment of displacements along a line: Extensometers
F
TC 184 Automation systems and integration
ISO 18828-2:2016
* Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 2: Reference process for seamless production planning
E
TC 189 Ceramic tile
ISO 14448:2016
* Low modulus adhesives for exterior tile finishing
D
TC 202 Microbeam analysis
ISO 22489:2016
* Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
C
TC 204 Intelligent transport systems
ISO 16787:2016
* Intelligent transport systems — As-sisted Parking System (APS) — Per-formance requirements and test procedures
E
ISO 18682:2016
* Intelligent transport systems — Exter-nal hazard detection and notification systems — Basic requirements
D
ISO 19080:2016
* Intelligent transport systems — Com-munications access for land mobiles (CALM) — CoAP facility
C
ISO/TR 19083-1:2016
* Intelligent transport systems — Emergency evacuation and disaster response and recovery — Part 1: Framework and concept of operation
G
TC 206 Fine ceramics
ISO 19603:2016
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings
B
TC 210 Quality management and cor-responding general aspects for medical devices
ISO 80369-7:2016
Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications
F
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/TS 16782:2016
* Clinical laboratory testing — Criteria for acceptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing
D
ISO 22870:2016
Point-of-care testing (POCT) — Re-quirements for quality and competence
B
TC 215 Health informatics
IEC 82304-1:2016
* Health software — Part 1: General requirements for product safety
D
TC 260 Human resource management
ISO 30409:2016
Human resource management — Workforce planning
E
TC 265 Carbon dioxide capture, trans-portation, and geological storage
ISO 27913:2016
Carbon dioxide capture, transporta-tion and geological storage — Pipeline transportation systems
E
TC 268 Sustainable cities and communities
ISO 37101:2016
Sustainable development in communi-ties — Management system for sus-tainable development — Requirements with guidance for use
E
TC 269 Railway applications
ISO/TR 21245-2:2016
* Railway applications — Rail project planning process — Part 2: Conditions
A
14 ISO Update, Supplement to ISO Focus -- November 2016
TC 274 Light and lighting
ISO/CIE 28077:2016
* Photocarcinogenesis action spectrum (non-melanoma skin cancers)
B
TC 292 Security and resilience
ISO 22325:2016
* Security and resilience — Emergency management — Guidelines for capabil-ity assessment
B
TC 301 Energy management and energy savings
ISO 50047:2016
Energy savings — Determination of energy savings in organizations
F
CASCO Committee on conformity assessment
ISO/IEC TS 17021-9:2016
* Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems
A
ISO 17034:2016
General requirements for the compe-tence of reference material producers
D
JTC 1 Information technology
ISO/IEC 33071:2016
* Information technology — Process assessment — An integrated process capability assessment model for Enter-prise processes
H
ISO/IEC/IEEE 8802-1BA:2016
* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1BA: Audio video bridging (AVB) systems
E
ISO/IEC/IEEE 8802-1BR:2016
* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Spe-cific requirements — Part 1BR: Virtual bridged local area networks — Bridge port extension
H
ISO/IEC 9594-8:2014/Cor 2:2016
* Information technology — Open Systems Interconnection — The Direc-tory — Part 8: Public-key and attribute certificate frameworks — Technical Corrigendum 2
free
ISO/IEC 29110-3-3:2016
* Systems and software engineering — Lifecycle profiles for Very Small Enter-prises (VSEs) — Part 3-3: Certification requirements for conformity assess-ments of VSE profiles using process assessment and maturity models
C
ISO/IEC 29155-4:2016
* Systems and software engineer-ing — Information technology project performance benchmarking framework — Part 4: Guidance for data collection and maintenance
E
ISO/IEC 17839-3:2016
* Information technology — Identification cards — Biometric System-on-Card — Part 3: Logical information interchange mechanism
C
ISO/IEC 18328-3:2016
* Identification cards — ICC-managed devices — Part 3: Organization, secu-rity and commands for interchange
F
ISO/IEC 18598:2016
* Information technology — Automated infrastructure management (AIM) sys-tems — Requirements, data exchange and applications
E
ISO/IEC 10118-1:2016
* Information technology — Security techniques — Hash-functions — Part 1: General
B
ISO/IEC 11770-6:2016
* Information technology — Security techniques — Key management — Part 6: Key derivation
D
ISO/IEC 27034-6:2016
* Information technology — Security techniques — Application security — Part 6: Case studies
G
ISO/IEC 27035-1:2016
* Information technology — Security techniques — Information security inci-dent management — Part 1: Principles of incident management
D
ISO/IEC 27035-2:2016
* Information technology — Security techniques — Information security incident management — Part 2: Guide-lines to plan and prepare for incident response
G
ISO/IEC 13818-1:2015/Amd 4:2016
* Information technology — Generic coding of moving pictures and associ-ated audio information — Part 1: Sys-tems — Amendment 4: New profiles and levels for MPEG4 audio descriptor
XZ
ISO/IEC 13818-1:2015/Amd 5:2016
* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Amendment 5: Carriage of MPEGH 3D audio over MPEG2 systems
XZ
ISO/IEC 13818-1:2015/Amd 6:2016
* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Amendment 6: Carriage of Quality Metadata in MPEG-2 Systems
XZ
ISO/IEC 13818-1:2015/Cor 1:2016
* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Technical Corrigendum 1
free
ISO/IEC 13818-1:2015/Amd 1:2015/Cor 2:2016
* Information technology — Generic coding of moving pictures and as-sociated audio information — Part 1: Systems — Amendment 1: Delivery of timeline for external data — Technical Corrigendum 2
free
ISO/IEC 15444-1:2016
* Information technology — JPEG 2000 image coding system: Core coding system — Part 1:
H
ISO/IEC 18477-8:2016
* Information technology — Scalable compression and coding of continu-ous-tone still images — Part 8: Loss-less and near-lossless coding
G
ISO/IEC 18477-9:2016
* Information technology — Scalable compression and coding of continu-ous-tone still images — Part 9: Alpha channel coding
D
ISO/IEC TR 19566-2:2016
* Information technologies — JPEG Sys-tems — Part 2: Transport mechanisms and packaging
C
ISO/IEC 23003-2:2010/Amd 4:2016
* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 4: SAOC Conformance
E
ISO Update, Supplement to ISO Focus -- November 2016 15
ISO/IEC 23003-2:2010/Amd 5:2016
* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 5: SAOC Reference Software
XZ
ISO/IEC 23009-1:2014/Amd 3:2016
* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation descrip-tion and segment formats — Amend-ment 3: Authentication, MPD linking, Callback Event, Period Continuity and other Extensions
E
ISO/IEC 30116:2016
* Information technology — Automatic identification and data capture tech-niques — Optical Character Recogni-tion (OCR) quality testing
E
ISO/IEC 29500-1:2016
* Information technology — Document description and processing languages — Office Open XML File Formats — Part 1: Fundamentals and Markup Language Reference
H
ISO/IEC 29500-4:2016
* Information technology — Document description and processing languages — Office Open XML File Formats — Part 4: Transitional Migration Features
H
ISO/IEC TR 20000-12:2016
* Information technology — Service management — Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service manage-ment frameworks: CMMI-SVC
E
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 887:2000 (reconfirmed)
ISO 7089:2000 (reconfirmed)
ISO 7090:2000 (reconfirmed)
ISO 7091:2000 (reconfirmed)
ISO 7093-1:2000 (reconfirmed)
ISO 7094:2000 (reconfirmed)
ISO 14589:2000 (reconfirmed)
ISO 885:2000 (reconfirmed)
ISO 4753:2011
ISO 6157-2:1995 (reconfirmed)
ISO 6157-3:1988 (reconfirmed)
ISO 1207:2011
ISO 1580:2011
ISO 2009:2011
ISO 2010:2011
ISO 3800:1993 (reconfirmed)
ISO 4766:2011
ISO 7045:2011
ISO 7046-1:2011
ISO 7046-2:2011
ISO 7047:2011
ISO 7048:2011
ISO 7380-1:2011
ISO 7380-2:2011
ISO 14579:2011
ISO 14580:2011
ISO 14583:2011
ISO 14584:2011
ISO 10484:1997 (reconfirmed)
ISO 7049:2011
ISO 7050:2011
ISO 7051:2011
ISO 14585:2011
ISO 14586:2011
ISO 14587:2011
TC 20 Aircraft and space vehicles
ISO 461-2:1985 (reconfirmed)
TC 22 Road vehicles
ISO 15031-1:2010
ISO 16844-2:2011
ISO 22901-2:2011
ISO 6625:1986 (reconfirmed)
ISO 7440-1:1991
ISO 3958:1996 (reconfirmed)
ISO 20176:2011
TC 23 Tractors and machinery for agriculture and forestry
ISO 11839:2010
TC 28 Petroleum products and related prod-ucts of synthetic or biological origin
ISO 3838:2004 (reconfirmed)
ISO 3993:1984 (reconfirmed)
ISO 4266-1:2002 (reconfirmed)
ISO 4266-2:2002 (reconfirmed)
ISO 4266-3:2002 (reconfirmed)
ISO 4266-4:2002 (reconfirmed)
ISO 4266-5:2002 (reconfirmed)
ISO 4266-6:2002 (reconfirmed)
ISO 4269:2001 (reconfirmed)
ISO 7507-1:2003 (reconfirmed)
ISO 9029:1990 (reconfirmed)
ISO 9030:1990 (reconfirmed)
ISO 9114:1997 (reconfirmed)
ISO 13740:1998 (reconfirmed)
ISO 15169:2003 (reconfirmed)
ISO 6578:1991 (reconfirmed)
TC 29 Small tools
ISO 1641-2:2011
ISO 1641-3:2011
ISO 2306:1972 (reconfirmed)
ISO 2336-2:2006 (reconfirmed)
ISO 2402:1972 (reconfirmed)
ISO 2568:1988 (reconfirmed)
ISO 2586:1985 (reconfirmed)
ISO 2857:1973 (reconfirmed)
ISO 3337:2000 (reconfirmed)
ISO 3860:2011
ISO 5969:1979 (reconfirmed)
16 ISO Update, Supplement to ISO Focus -- November 2016
ISO 6462:2011
ISO 8688-1:1989 (reconfirmed)
ISO 8688-2:1989 (reconfirmed)
ISO 10910:1995 (reconfirmed)
ISO 11054:2006 (reconfirmed)
ISO 22037:2007 (reconfirmed)
TC 30 Measurement of fluid flow in closed conduits
ISO 22158:2011
TC 31 Tyres, rims and valves
ISO 7295:1988 (reconfirmed)
ISO 9475:1994 (reconfirmed)
TC 34 Food products
ISO 5518:2007 (reconfirmed)
ISO 6636-3:1983 (reconfirmed)
ISO 13720:2010
ISO 20837:2006 (reconfirmed)
ISO 6492:1999 (reconfirmed)
ISO 6496:1999 (reconfirmed)
ISO 6869:2000 (reconfirmed)
ISO 7485:2000 (reconfirmed)
ISO 14182:1999 (reconfirmed)
ISO 14797:1999 (reconfirmed)
ISO 16472:2006 (reconfirmed)
ISO 17375:2006 (reconfirmed)
ISO/TS 21569-2:2012
TC 35 Paints and varnishes
ISO 8502-12:2003 (reconfirmed)
TC 37 Terminology and other language and content resources
ISO 10241-1:2011
ISO 15188:2001 (reconfirmed)
TC 44 Welding and allied processes
ISO 15620:2000 (reconfirmed)
TC 59 Buildings and civil engineering works
ISO 1791:1983 (reconfirmed)
ISO 2848:1984 (reconfirmed)
ISO 11863:2011
ISO/TS 15686-9:2008
(reconfirmed)
ISO 10845-5:2011
ISO 10845-6:2011
ISO 10845-7:2011
ISO 10845-8:2011
TC 61 Plastics
ISO 1043-1:2011
ISO 1043-2:2011
ISO 6721-1:2011
ISO 6721-2:2008 (reconfirmed)
ISO 6721-4:2008 (reconfirmed)
ISO 6721-5:1996 (reconfirmed)
ISO 6721-6:1996 (reconfirmed)
ISO 6721-7:1996 (reconfirmed)
ISO 6721-10:2015
ISO 293:2004 (reconfirmed)
ISO 1060-2:1998 (reconfirmed)
ISO 1622-2:1995 (reconfirmed)
ISO 2115:1996 (reconfirmed)
ISO 2898-2:2008 (reconfirmed)
ISO 4576:1996 (reconfirmed)
ISO 4608:1998 (reconfirmed)
ISO 4610:2001 (reconfirmed)
ISO 4894-2:1995 (reconfirmed)
ISO 8257-2:2001 (reconfirmed)
ISO 15373:2001 (reconfirmed)
ISO 1209-2:2007 (reconfirmed)
ISO 20392:2007 (reconfirmed)
ISO 20394:2007 (reconfirmed)
TC 70 Internal combustion engines
ISO 4548-9:2008 (reconfirmed)
TC 72 Textile machinery and accessories
ISO 26243:2007 (reconfirmed)
TC 84 Devices for administration of medicinal products and catheters
ISO 11608-4:2006
ISO 23908:2011
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 27048:2011
TC 92 Fire safety
ISO 11925-3:1997 (reconfirmed)
TC 113 Hydrometry
ISO 9555-1:1994 (reconfirmed)
ISO 9555-3:1992 (reconfirmed)
ISO 9555-4:1992 (reconfirmed)
ISO 4364:1997
TC 114 Horology
ISO 23160:2011
TC 126 Tobacco and tobacco products
ISO 4387:2000 (reconfirmed)
ISO 4389:2000 (reconfirmed)
ISO 8454:2007 (reconfirmed)
ISO/TS 22304:2008
(reconfirmed)
ISO 4874:2000 (reconfirmed)
TC 131 Fluid power systems
ISO 16589-1:2011
ISO 16589-3:2011
ISO 16589-4:2011
ISO 16589-5:2011
TC 146 Air quality
ISO 14164:1999 (reconfirmed)
ISO 17736:2010
ISO 20552:2007 (reconfirmed)
TC 147 Water quality
ISO/TS 16489:2006
(reconfirmed)
ISO/TS 17379-1:2013
ISO/TS 17379-2:2013
ISO 22719:2008 (reconfirmed)
ISO Update, Supplement to ISO Focus -- November 2016 17
ISO 11348-1:2007 (reconfirmed)
ISO 11348-2:2007 (reconfirmed)
ISO 11348-3:2007 (reconfirmed)
ISO 15088:2007 (reconfirmed)
ISO 23893-1:2007 (reconfirmed)
TC 150 Implants for surgery
ISO 9585:1990 (reconfirmed)
TC 172 Optics and photonics
ISO 517:2008 (reconfirmed)
ISO 25297-1:2012
ISO 25297-2:2011
ISO 8037-1:1986 (reconfirmed)
TC 184 Automation systems and integration
ISO 10303-223:2008
(reconfirmed)
TC 216 Footwear
ISO 10748:2011
TC 229 Nanotechnologies
ISO/TS 16195:2013
ISO/TS 17200:2013
TC 251 Asset management
ISO 55000:2014
ISO 55001:2014
JTC 1 Information technology
ISO/IEC 29183:2010
Standards withdrawn
Period from 01 October to 31 October 2016
REMCO Committee on reference materials
ISO Guide 34:2009 (replaced by ISO 17034:2016)
TC 22 Road vehicles
ISO 16845:2004 (replaced by ISO 16845-1:2016)
ISO/TR 9310:1987 (replaced by )
TC 47 Chemistry
ISO 78-3:1983 (replaced by )
ISO 78-4:1983 (replaced by )
ISO 2590:1973 (replaced by )
ISO 2718:1974 (replaced by )
ISO 5790:1979 (replaced by )
ISO 6286:1982 (replaced by )
ISO 6382:1981 (replaced by )
ISO 6685:1982 (replaced by )
ISO 6955:1982 (replaced by )
TC 59 Buildings and civil engineering works
ISO 6240:1980 (replaced by ISO 19208:2016)
ISO 6241:1984 (replaced by ISO 19208:2016)
ISO 7162:1992 (replaced by ISO 19208:2016)
ISO 9699:1994 (replaced by ISO 19208:2016)
ISO/PAS 22539:2007
(replaced by ISO 19208:2016)
TC 79 Light metals and their alloys
ISO 6138:1991 (replaced by )
ISO 6140:1991 (replaced by )
ISO 6607:1985 (replaced by )
ISO 6994:1986 (replaced by )
ISO 6995:1985 (replaced by )
ISO 8556:1986 (replaced by )
ISO 8557:1985 (replaced by )
ISO 8558:1985 (replaced by )
ISO 10213:1991 (replaced by )
TC 114 Horology
ISO 9701:1994 (replaced by )
TC 121 Anaesthetic and respiratory equipment
ISO 5366-1:2000 (replaced by )
ISO 5366-3:2001 (replaced by )
TC 122 Packaging
ISO 21067:2007 (replaced by ISO 21067-2:2015, ISO 21067-1:2016)
TC 182 Geotechnics
ISO/TS 17892-4:2004
(replaced by ISO 17892-4:2016)
JTC 1 Information technology
ISO/IEC 27035:2011
(replaced by ISO/IEC 27035-1:2016, ISO/IEC 27035-2:2016)
Meeting calendar
(update at 01 October 2016)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
November 2016
7-8 London (United Kingdom)
TC 241 Road traffic safety management systems
7-8 Tel Aviv (Israel) TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems
7-11 Orlando (USA) PC 302 Guidelines for audit-ing management systems
7-11 Delft (Netherlands)
TC 210 Quality management and corresponding general aspects for medical devices
7-11 Singapore (Singapore)
TC 229 Nanotechnologies
7-11 Tel Aviv (Israel) TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation
7-12 Lillehammer (Norway)
** JTC 1 Information technology
18 ISO Update, Supplement to ISO Focus -- November 2016
8-9 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
8-10 Kobe (Japan) TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
9 Sydney (Australia)
TC 98/SC 1 Bases for design of structures/Terminol-ogy and symbols
9-10 Tel Aviv (Israel) TC 282/SC 2 Water reuse/Water reuse in urban areas
9-11 London (United Kingdom)
TC 309 Organizational governance
10 Sydney (Australia)
TC 98/SC 2 Bases for design of structures/Reliability of structures
10 Sydney (Australia)
TC 98/SC 3 Bases for design of structures/Loads, forces and other actions
10 Tel Aviv (Israel) TC 282 Water reuse
10-11 Bern (Switzerland)
TC 34/SC 12 Food products/Sen-sory analysis
10-11 Busan (Korea, Republic of)
TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
11 Sydney (Australia)
TC 98 Bases for design of structures
13-17 Lillehammer (Norway)
TC 215 Health informatics
14 Berlin (Germany) TC 83/SC 6 Sports and other recreational facilities and equipment/Mar-tial arts
14-15 Milton (Canada) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
14-15 Milton (Canada) TC 44/SC 10 Welding and allied processes/Quality management in the field of welding
14-18 Toronto (Canada) TC 44 Welding and allied processes
15-16 Toronto (Canada) TC 44/SC 7 Welding and allied processes/Represen-tation and terms
15-17 Boulogne Billan-court (France)
* TC 22/SC 39 Road vehicles/Ergonomics
15-18 Linyi (China) TC 134 Fertilizers and soil conditioners
16 Milton (Canada) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds
16 Toronto (Canada) TC 44/SC 9 Welding and allied processes/Health and safety
17 Oslo (Norway) TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations
17 Hiroshima City (Japan)
TC 244 Industrial furnaces and associated pro-cessing equipment
17-18 Orlando (USA) TC 299 Robotics
18 Rome (Italy) TC 160/SC 1 Glass in build-ing/Product considerations
18 Rome (Italy) TC 160/SC 2 Glass in building/Use considerations
21-23 Kuala Lumpur (Malaysia)
PC 303 Guidelines on con-sumer warranties and guarantees
21-24 Wellington (New Zealand)
TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
21-24 Toronto (Canada) TC 272 Forensic sciences
21-25 Beijing (China) PC 287 Chain of custody of wood and wood-based products
24 Brussels (Belgium)
TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection
24-25 London (United Kingdom)
TC 281 Fine Bubble Technology
24-26 Istanbul (Turkey) TC 34/SC 3 Food products/Fruits and vegetables and their derived products
25 Tokyo (Japan) TC 300 Solid recovered fuels
November-December 2016
27-2 Rotterdam (Netherlands)
TC 176 Quality management and quality assurance
28-2 Guildford (United Kingdom)
TC 121/SC 6 Anaesthetic and res-piratory equipment/Medical gas systems
28-2 Redlands (USA) TC 211 Geographic in-formation/Geomatics
29-1 Tokyo (Japan) PC 294 Guidance on unit pricing
30-2 Kurashiki (Japan) TC 172/SC 9 Optics and photon-ics/Electro-optical systems
December 2016
1-2 London (United Kingdom)
TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
1-2 Sapporo (Japan) TC 265 Carbon dioxide capture, transporta-tion, and geological storage
1-2 Paris (France) * TC 297 Waste management, recycling and road operation service
5 Amsterdam (Netherlands)
* TC 197 Hydrogen technologies
5-9 Sydney (Australia)
TC 217 Cosmetics
6-8 Lübeck (Germany)
TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment
6-9 Rio de Janeiro (Brazil)
PC 277 Sustainable procurement
6-9 Dublin (Ireland) TC 275 Sludge recovery, recycling, treatment and disposal
ISO Update, Supplement to ISO Focus -- November 2016 19
8 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities
8-9 Petten (Netherlands)
TC 197 Hydrogen technologies
9 Beijing (China) TC 34/SC 6 Food products/Meat, poultry, fish, eggs and their products
9 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
15-16 Erlangen (Germany)
TC 184/SC 1 Automation systems and integration/Physi-cal device control
January 2017
16-20 Sydney (Australia)
TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
17-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings
19 Tokyo (Japan) TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
24-25 Cochin (India) TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
February 2017
2 Tucson (USA) TC 261 Additive manufacturing
6-10 Tunis (Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces
6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
15 Geneva (Switzerland)
President's committee
President's committee
17 Galveston (USA) TC 304 Healthcare administration
20 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment
20-22 London (United Kingdom)
* TC 8/SC 8 Ships and marine technology/Ship design
21-22 Kuala Lumpur (Malaysia)
** TMB Technical Manage-ment Board
22-24 Paris (France) * TC 147/SC 3 Water qual-ity/Radioactivity measurements
24-26 St. John, Newfoundland (Canada)
TC 121/SC 4 Anaesthetic and res-piratory equipment/Terminology and semantics
Budapest (Hungary)
** TC 267 Facilities management
March 2017
6 Kyoto (Japan) ** TC 60 Gears
6 Kyoto (Japan) * TC 60/SC 1 Gears/Nomenclature and wormgearing
6 Kyoto (Japan) * TC 60/SC 2 Gears/Gear capacity calculation
14 Geneva (Switzerland)
President's committee
President's committee
15 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
16-17 Geneva (Switzerland)
COUNCIL Council
20-24 Leeds (United Kingdom)
* TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
27 Toronto (Canada) * TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests
27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
28 Toronto (Canada) * TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors
29 Philadelphia (USA)
* TC 219 Floor coverings
30 Toronto (Canada) * TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation
30 Pau (France) * TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
30-31 Toronto (Canada) * TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort
April 2017
3-4 Chicago (USA) TC 117 Fans
3-7 Stockholm (Sweden)
* TC 118 Compressors and pneumatic tools, ma-chines and equipment
3-7 Stockholm (Sweden)
* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
3-7 Stockholm (Sweden)
* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
3-7 London (United Kingdom)
* TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings
6 Stockholm (Sweden)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air treatment technology
20 ISO Update, Supplement to ISO Focus -- November 2016
10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding
17-21 Hangzhou (China)
TC 215 Health informatics
22-26 Faro, Algarve (Portugal)
* TC 282/SC 2 Water reuse/Water reuse in urban areas
24-25 Hamilton (New Zealand)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
24-28 Jeju (Korea, Republic of)
* TC 292 Security and resilience
26 London (United Kingdom)
* TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
26-27 Vancouver (Canada)
* CASCO Committee on con-formity assessment
27 Virtual (Unknown)
* TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
Toulouse (France)
** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
Toulouse (France)
** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
Toulouse (France)
** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
Orlando (USA) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Orlando (USA) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
(Unknown) ** TC 34/SC 15 Food products/Coffee
(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa
May 2017
3 Virtual (Unknown)
* TC 22/SC 31 Road vehicles/Data communication
7-12 Oslo (Norway) * TC 184/SC 4 Automation systems and integration/Indus-trial data
8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information
8-11 Madrid (Spain) * TC 272 Forensic sciences
8-12 Stockholm (Sweden)
* TC 10 Technical product documentation
8-12 (Netherlands) ** TC 35 Paints and varnishes
8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
8-12 Seoul (Korea, Republic of)
* TC 161 Controls and protec-tive devices for gas and/or oil
8-12 Berlin (Germany) ** TC 171 Document manage-ment applications
11 Stockholm (Sweden)
** TC 10/SC 1 Technical product documentation/Basic conventions
15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies
15-19 Washington, D.C (USA)
* TC 4 Rolling bearings
15-19 Seattle (USA) * TC 31 Tyres, rims and valves
15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims
15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
15-19 Rio de Janeiro (Brazil)
TC 68 Financial services
18 Busan (Korea, Republic of)
* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
18-19 Kuala Lumpur (Malaysia)
COPOLCO Committee on con-sumer policy
22-26 Pretoria (South Africa)
* TC 46/SC 4 Information and documentation/Tech-nical interoperability
22-26 Pretoria (South Africa)
* TC 46/SC 11 Information and doc-umentation/Archives/records management
22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines
22-26 Washington, D.C (USA)
* TC 193/SC 1 Natural gas/Analysis of natural gas
22-26 (Panama) ** TC 228 Tourism and related services
23-25 (Japan) ** TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
25-26 Hannover (Germany)
* TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
29-30 Tokyo (Japan) * TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
(Japan) ** JTC 1/SC 32 Information technolo-gy/Data management and interchange
Stockholm (Sweden)
** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
ISO Update, Supplement to ISO Focus -- November 2016 21
Stockholm (Sweden)
** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation
(Sweden) ** TC 29 Small tools
(Unknown) ** TC 226 Materials for the production of primary aluminium
May-June 2017
27-2 (Ireland) ** TC 238 Solid biofuels
29-2 Okayama (Japan)
* JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance
29-2 Stockholm (Sweden)
* TC 211 Geographic in-formation/Geomatics
31-2 Delft (Netherlands)
** TC 145 Graphical symbols
June 2017
5-9 Colorado Springs (USA)
** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
5-9 (Unknown) ** TC 268 Sustainable cities and communities
5-9 (Unknown) ** TC 268/SC 1 Sustainable cities and communities/Smart community infrastructures
6-9 Jeju (Korea, Republic of)
** TC 156 Corrosion of metals and alloys
7-9 (USA) ** TC 220 Cryogenic vessels
8-9 Cambridge (Unit-ed Kingdom)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
9 Chicago (USA) * TC 136 Furniture
12-16 Paris (France) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
12-16 Shanghai (China) * TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
14-15 Geneva (Switzerland)
** TMB Technical Manage-ment Board
15-22 London (United Kingdom)
* JTC 1/SC 28 Information technol-ogy/Office equipment
16 Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
19-20 Stockholm (Sweden)
* TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects
19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology
19-23 Cape Town (South Africa)
* TC 69 Applications of statis-tical methods
19-23 Cape Town (South Africa)
* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols
19-23 Cape Town (South Africa)
* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management
19-23 Cape Town (South Africa)
* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results
19-23 Cape Town (South Africa)
* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
19-23 Cape Town (South Africa)
* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development
19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies
23-30 (Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
26-30 Washington, D.C (USA)
* TC 193 Natural gas
26-30 Washington, D.C (USA)
* TC 193/SC 3 Natural gas/Upstream area
27-28 Qingdao (China) President's committee
President's committee
Tokyo (Japan) * JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
(USA) ** TC 42 Photography
(Unknown) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
Chennai (India) ** TC 120 Leather
Delft (Netherlands)
** TC 274 Light and lighting
2nd Quarter 2017
(Korea, Repub-lic of)
** TC 6 Paper, board and pulps
Tsukuba (Japan) ** TC 92 Fire safety
(India) ** TC 113 Hydrometry
July 2017
7 Milan (Italy) ** TC 206 Fine ceramics
22 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces
August 2017
22 ISO Update, Supplement to ISO Focus -- November 2016
14-15 London (United Kingdom)
* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
28 Virtual (Unknown)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
September 2017
4-8 Berlin (Germany) * TC 21 Equipment for fire protection and fire fighting
11-15 San Francisco (USA)
* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
11-15 London (United Kingdom)
** TC 17/SC 17 Steel/Steel wire rod and wire products
11-15 Gaithersburg (USA)
* TC 108 Mechanical vibration, shock and condition monitoring
11-15 Gaithersburg (USA)
* TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
17 Berlin (Germany) President's committee
President's committee
17-22 Seoul (Korea, Republic of)
* TC 61 Plastics
17-22 Seoul (Korea, Republic of)
* TC 164 Mechanical testing of metals
18 Berlin (Germany) * COUNCIL Council
18-20 London (United Kingdom)
* TC 290 Online reputation
19 Berlin (Germany) ** TMB Technical Manage-ment Board
20-21 Seoul (Korea, Republic of)
* TC 221 Geosynthetics
20-22 Berlin (Germany) ** GA General Assembly
21-22 Berlin (Germany) * TC 22/SC 31 Road vehicles/Data communication
21-23 London (United Kingdom)
** TC 201 Surface chemical analysis
25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings
25-29 Florence (Italy) * TC 146/SC 1 Air quality/Stationary source emissions
25-29 (Europe) ** TC 146/SC 6 Air quality/Indoor air
25-29 Tokyo (Japan) * TC 205 Building environment design
25-29 Berlin (Germany) * TC 232 Learning services outside formal education
26-30 San José, Cali-fornia (USA)
* JTC 1/SC 2 Information technol-ogy/Coded character sets
27 Düsseldorf (Germany)
* TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes
28 (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
29 Virtual (Unknown)
TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure
29 Berlin (Germany) ** TC 254 Safety of amusement rides and amusement devices
London (United Kingdom)
** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
(Australia) ** TC 27 Solid mineral fuels
(Australia) ** TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance
(Australia) ** TC 27/SC 3 Solid mineral fuels/Coke
(Australia) ** TC 27/SC 4 Solid mineral fuels/Sampling
(Australia) ** TC 27/SC 5 Solid mineral fuels/Methods of analysis
Erlangen (Germany)
** TC 36 Cinematography
Copenhagen (Denmark)
** TC 58/SC 2 Gas cylinders/Cylin-der fittings
Tel Aviv (Israel) ** TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works
Sapporo (Japan) ** TC 71 Concrete, reinforced concrete and pre-stressed concrete
(Europe) ** TC 146/SC 3 Air quality/Ambient atmospheres
Vienna (Austria) ** TC 165 Timber structures
(Nigeria) ** TC 260 Human resource management
(Malaysia) ** TC 267 Facilities management
3rd Quarter 2017
Beijing (China) ** TC 289 Brand evaluation
Vienna (Austria) ** TC 289 Brand evaluation
October 2017
2-7 Vladivostok (Russian Federation)
* JTC 1 Information technology
8 New Orleans (USA)
* TC 38 Textiles
9-10 Xian (China) * TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks
10-13 Berlin (Germany) ** TC 153 Valves
11 New Orleans (USA)
* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
11 New Orleans (USA)
* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
12 New Orleans (USA)
* TC 38/SC 23 Textiles/Fibres and yarns
ISO Update, Supplement to ISO Focus -- November 2016 23
12 New Orleans (USA)
* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
16-20 Tokyo (Japan) * TC 111 Round steel link chains, chain slings, components and accessories
16-20 Tokyo (Japan) * TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
17-18 Qingdao (China) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
17-19 Hangzhou (China)
** TC 264 Fireworks
18-19 Hangzhou (China)
* TC 105 Steel wire ropes
20 Virtual (Unknown)
President's committee
President's committee
20 Tokyo (Japan) * TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories
22-27 Hawaii (USA) * TC 45 Rubber and rubber products
23-26 Brussels (Belgium)
** TC 146/SC 2 Air quality/Workplace atmospheres
23-26 Brussels (Belgium)
** TC 146/SC 4 Air quality/General aspects
23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
23-27 Sydney (Australia)
TC 209 Cleanrooms and as-sociated controlled environments
(Unknown) ** TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products
Washington, D.C (USA)
** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
Pretoria (South Africa)
** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
Dallas (USA) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
Pretoria (South Africa)
** TC 59/SC 15 Buildings and civil engineering works/Framework for the description of hous-ing performance
Pretoria (South Africa)
** TC 59/SC 18 Buildings and civil en-gineering works/Con-struction procurement
Milan (Italy) ** TC 86/SC 7 Refrigeration and air-conditioning/Test-ing and rating of com-mercial refrigerated display cabinets
November 2017
7 Marseille (France)
* TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints
8-9 Berlin (Germany) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
8-10 Manila (Philippines)
* TC 123 Plain bearings
10 Berlin (Germany) * TC 70 Internal combustion engines
21 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
22 Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
(India) ** TC 54 Essential oils
(Korea, Repub-lic of)
** TC 184/SC 4 Automation systems and integration/Indus-trial data
(Australia) ** TC 292 Security and resilience
4th Quarter 2017
(China) ** TC 34/SC 4 Food products/Cere-als and pulses
Month unknown 2017
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
(South Africa) ** TC 46 Information and documentation
(USA) ** TC 198 Sterilization of health care products
(China) ** TC 301 Energy management and energy savings
February 2018
12 (Sweden) ** TC 58 Gas cylinders
12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
March 2018
22-23 Geneva (Switzerland)
** COUNCIL Council
1st Quarter 2018
(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces
April 2018
(USA) ** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
Edinburgh (Unit-ed Kingdom)
** TC 147 Water quality
June 2018
24 ISO Update, Supplement to ISO Focus -- November 2016
Daegu (Korea, Republic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Norway) ** TC 292 Security and resilience
September 2018
10-11 Toronto (Canada) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
24 Geneva (Switzerland)
** COUNCIL Council
26-28 Geneva (Switzerland)
** GA General Assembly
Vienna (Austria) ** TC 5 Ferrous metal pipes and metallic fittings
Philadelphia (USA)
** TC 28 Petroleum products and related products of synthetic or bio-logical origin
(Japan) ** TC 61 Plastics
(Mexico) ** TC 201 Surface chemical analysis
3rd Quarter 2018
(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces
(Netherlands) ** TC 92 Fire safety
Sao Paulo (Brazil)
** TC 135 Non-destructive testing
October 2018
1-2 The Hague (Netherlands)
** TC 209 Cleanrooms and as-sociated controlled environments
Beijing (China) ** TC 59 Buildings and civil engineering works
(China) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
(Malaysia) ** TC 215 Health informatics
Month unknown 2018
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Zhuhai (China) ** JTC 1/SC 28 Information technol-ogy/Office equipment
(Unknown) ** TC 34 Food products
(China) ** TC 45 Rubber and rubber products
(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
(China) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Firefighters' personal equipment
Milan (Italy) ** TC 161 Controls and protec-tive devices for gas and/or oil
Buenos Aires (Argentina)
** TC 228 Tourism and related services
(Unknown) ** TC 276 Biotechnology
(Mexico) ** TC 301 Energy management and energy savings
June 2019
Beijing (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
Month unknown 2019
(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Month unknown 2020
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Top Related