1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 1/26
Note: Information on the WCM, WCG & WCAM locomotives can be found here .
Additional details and diagrams of various electric loco classes can be found at Prakash Tendulkar's site .
Battery Locomotives
NBM–1 Battery-electric locomotives used by CR on the Gwalior lines. These were built by BHEL in
1987; only three units were built.
Comparative Specifications
BBCI The BB&CI Railway had two battery-powered shunters for use in yards at Bombay. There
were only two of this class, and they were imported from the UK in 1927.
Comparative Specifications
AC Electric Locomotives
WAM–1 Early 2800 hp SNCF design for 25kV AC, with ignitron rectifiers. Introduced in 1959, they
were mostly deployed by ER in the Howrah-Asansol-Dhanbad-Mughalsarai section. They were less
frequently found 'upstream' in the Delhi-Kanpur-Mughalsarai section, and in the Igatpuri-Bhusaval
section of the Central Railway. Mostly used for non-express passenger trains, but some were used
double-headed for freight service. Some were still [12/98] in operation on ER (Sealdah-Lalgola
passenger, etc.).
WAM-1's are significant in the history of electric traction in India as they were among the first AC electrics
to run in India. Like the WAG-1's, some of their advanced features turned out to be unsuitable for Indian
conditions.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 2/26
Manufactured by Kraus-
Maffei, Krupp, SFAC, La
Brugeoise & Nivelle (50
cycles European group).
Ignitron rectifiers feeding
four DC traction motors
accepting pulsating
current input. Motors are
connected to the axles
by a Jacquemin drive. Speed control by tap-changer on input
transformer (motors permanently wired in parallel). Superstructure mounted on bogies with pendular
suspension with equalizer beams. Electricals from ACEC, AEG, Alstom, Brown Boveri, Siemens and others.
B-B (monomotor bogies). Jeumont transformer (20 taps), Oerlikon exhauster, Arno rotary converter. Air
loco brakes, vacuum train brakes.
Manufacturers: Kraus-Maffei, Krupp, SFAC, La Brugeoise & Nivelle (50 cycles European group)
Traction Motors: Siemens/ACEC/Alstom MG 710A (740hp, 1250V, 480A, 1000 rpm, weight 2750kg). Fully
suspended, force-ventilated.
Rectifiers: Four water-cooled ignitrons from SGT, each rated for 575kW / 1250V.
Pantographs: Two Faiveley AM-12.
Comparative Specifications
WAM–2 2790hp Mitsubishi locos. The first batch of 10 locos had air brakes for the loco and
vacuum train brakes, and the second batch of 26 had only vacuum brakes. These have not been
retrofitted with air train brakes, hence today they haul only local passenger trains. These were used on
ER, and sometimes ran all the way to New Delhi via Kanpur. They were also used double-headed for
freight trains. Four traction motors permanently coupled in parallel are fed by ignitron rectifiers. Speed
control is by a tap changer on the input transformer. Mitsubishi transformer, 20 taps. Oerlikon exhauster
and compressor, Arno rotary converter.
Manufacturers: Mitsubishi
Traction Motors: Mitsubishi MB 3045-A (745hp, 725V, 815A, 1000 rpm, weight 2200kg).
Rectifiers: Mitsubishi water-cooled ignitrons (GU 31), rated at 725V / 390A.
Pantographs: Two Faiveley AM-12.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 3/26
Comparative Specifications
WAM–3 [2/00] Only two of these locos existed (both at Asansol, #20333, #20337). These are
basically the same as WAM-2 locos, but with reversed pantographs and Mitsubishi traction motors from a
different batch, and silicon rectifiers instead of ignitrons. They came along with the second batch of (26)
WAM-2 locos. These were used to haul the Kalka Mail, Toofan Exp., Amritsar Exp. at first, and then when
the WAM-4P and other variants arrived they were relegated to hauling lower priority trains such as the
Sealdah-Lalgola Pass. or the Howrah-Azimgunj Pass., among others. By Jan. 2000, they were relegated
to shunting duties at the Asansol shed.
Manufacturers: Mitsubishi
Traction Motors: Mitsubishi MB 3045-A (745hp, 725V, 815A, 1000 rpm, weight 2200kg).
Rectifiers: Two Silicon , type SF-0C20R (725V / 2260kW), rectifier cell SR200F, weight 2400kg with
auxiliaries.
Pantographs: Two Faiveley AM-12.
Comparative Specifications
WAM–4 The problems with the WAM-1 series prompted
IR to come up with better models, and after some variations,
the WAM-4 model was produced, the first indigenously
designed and built electric loco (first units delivered by CLW in
1970-71). They were produced until about 1997.
They use the same Alco asymmetric trimount bogies as the
successful WDM-2 diesel class. These locos feature rheostatic
braking, and MU capability. They have silicon rectifiers. MU
operation up to 4 units possible. Air brakes for loco and
vacuum train brakes fitted as original equipment. Rheostatic braking also provided. Speed control by
three series-parallel motor combinations and weak field operation. Auxiliaries from Westinghouse and
Kirloskar (compressors), S F India (blowers), Northey (exhauster), etc.
This class proved so successful by virtue of its ruggedness suitable for Indian conditions and simplicity of
maintenance, that IR used this basic design for a number of other locos later (WCAM-1, WAG-5A, WCG-2,
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 4/26
and some WAP models). WAM-4B's were regeared versions for
freight use and many were later modified and converted to other
classes (See below). WAM-4Plocos are intended for passenger
operations, with some regearing and usually allowing all-parallel
operation of some or all of the traction motors. The WAM-4P loco
is still among the most heavily used electric locos of IR. A single
WAM-4 can generally haul up to a 24-coach passenger rake.
This loco class has been seen in many variations, as a lot of
workshops and sheds have carried out their own enhancements
or modifications to the basic loco design. Variants include WAM-4P D (dual
brakes),WAM-4P R (??), WAM-4P DB 6P, WAM-4 6P DB HS, and WAM-4 6P D (these are for superfast
trains),WAM-4P DB 3P and WAM-4 2S-3P (some superfasts, passengers),
and WAM-4P DB 4P (generally for stopping passengers). The 'DB' or 'D' generally, but perhaps not
always, indicates dual-brake capability. 'HS' may be for 'high speed'.
'2S', '3P', '6P', etc. indicate traction motors connected in series or parallel. The WAM-4 has six traction
motors, and originally they were wired to be available in different configurations at different power
settings. At notches up to 14, all motors were in series (at notch 14 all resistors dropping out); up to
notch 21 in series-parallel combinatons (three pairs of motors in series, the pairs themselves being in
parallel); and further notches with all motors in paralell (at notch 30 all motors are in parallel with
resistors dropping out). This is the original configuration of the WCAM-x series of locos too. The WAM-4
locos were later reconfigured to have all motors always in parallel (6P variants) or with the three series-
connected pairs in parallel (2S 3P variants). Some WAM-4 locos from CLW are thought to have had the
2S 3P configuration right from the start. The 2S 3P configuration was better for the mixed traffic loads
especially as it allowed the locos to start hauling larger loads without stalling. With increasing use of the
WAM-4 locos for passenger traffic the all-parallel configuration was deemed more desirable since it
allowed higher speeds and higher acceleration.
Some other odd combinations of these suffixes have been sighted, such as WAM
4+6P+DB+HS andWAM-4 6P-E (?? is this one air-braked or dual-braked?). A goods version of the
WAM-4 is classifiedWAM-4G. WAM-4H is a variant with Hitachi motors. The WAM-4E is purely air-
braked. All these locos share bogie design with WCAM-1, WAG-5, WDM-2, and WCG-2 (Alco cast trimount
bogie). Although the code indicates a mixed-use loco, most WAM-4's ended up hauling passenger trains.
They have been used for regularly hauling freight only in a few locations (Arakkonam - Renigunta,
Kirandul-Kottavalasa and other SER sections). Max. speed 110km/h.
[1/05] Most of the WAM-4 locos now have their MU capability disabled as RDSO disapproves of these
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 5/26
locos running MU'd over 100km/h.
WAG-5 / WAG-5B locos with road numbers 21101 to 21138 all used to be WAM-4B locos. They were
regeared and modified to be suitable for hauling heavier freight loads.
A few WAM-4's have been fitted for OHE monitoring by the Itarsi shed. They have CCTV cameras
mounted on top of the headlamp assembly pointing towards the OHE and a separate lamp to illuminate
the OHE. Monitors are installed inside the cabs. These locos even have rear view mirrors.
Manufacturers: CLW
Traction Motors: Alstom TAO 659 A1 (575kW, 750V). Six motors, axle-hung, nose-suspended, force-
ventilated.
Gear Ratio: 15:62 originally (and still for WAM-4 2S3P), now many variations, 21:58 being common for
WAM-4 6P locos..
Transformer: Heil BOT 3460 A, 22.5kV / 3460kVA.
Rectifiers: Two silicon rectifier cells, 1270V / 1000A each cubicle.
Pantographs: Two Faiveley AM-12.
Axle load: 18.8t
Bogies: Alco asymmetric trimount (Co-Co), same as with WDM-2, WDS-6, etc.
Hauling capacity: 2010t
Current Ratings: (WAM-4 6P) 1100A/10min, 750A continuous
Comparative Specifications
WAP–1 Built by CLW to RDSO specifications. First in the
dedicated electric passenger loco series. Production began in
1980 and the locos were at first used solely for the Howrah-Delhi
Rajdhani. A single WAP-1 (#22001) was all that was needed to
haul the 18-coach Rajdhani at a max. speed of 120 km/h. and an
average speed of around 82km/h. Continuous power 3760hp;
starting TE 22.2t, continuous TE 13.8t. Loco weight is 112.8t.
The original WAP-1 locos were modified and regeared versions of
the WAM-4, originally classified WAM-4R. Rated max. speed is
130km/h (some documents suggest 140km/h). Some (5?) with
Flexicoil Mark II bogies were classified WAP-1 FM II and later WAP-3. Two WAP-1 units were also
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 6/26
converted to WAP-6. [10/02] One of them, #22212, the first prototype WAP-6, was then converted to a
WAP-4 and was based at Jhansi (now [8/03] at Mughalsarai).
Many remaining WAP-1's are being converted to WAP-4's by a complete retrofit including new traction
motors, new transformers, etc. These upgrades do not result in the 'R' suffix in the road number that is
typical for rebuilt locos. Ghaziabad shed locos are currently [1/05] the only ones not scheduled for such
upgrades and are expected to remain as 'pure' WAP-1 units. The WAP-1E has only air brakes. Earlier
WAP-1's had loco air brakes and vacuum train brakes but were retrofitted for dual train brakes. Motors
are grouped in 2S-3P combination and weak field operation is available. Elgi compressors, Northey
exhausters, S F India blowers. The locos were originally not designed for MU operation but were later
modified to allow MU'ing.
Manufacturers: CLW
Traction Motors: Alstom/CLW - TAO 659 (575kW (770hp), 750V, 1095 rpm) Axle-hung, nose-suspended,
force-ventilated.
Gear Ratio: 58:21
Transformer: BHEL type HETT-3900, 3900 kVA. 32 taps.
Rectifiers: Two silicon rectifiers, with S18FN35 cells (by Hind Rectifier) with 64 cells per unit.
2700A/1050V.
Axle load: 18.8t.
Bogies: Co-Co Flexicoil (cast steel bogies); primary and secondary wheel springs with bolsters
Pantographs: Two Faiveley AM-12.
Current Ratings: 900A/10min
Comparative Specifications
WAP–2 Regeared versions of some WAM-2 (perhaps also WAM-3?) locos, fitted into a WAP-1
shell. Bogies were improved versions of the WAM-2 bogies, allowing for somewhat higher speeds. These
locos were found only on ER. On rare occasions these locos were used to haul the Howrah Raj in the
early 1980s. There are thought to have been only 4 of these, and they were decommissioned in the late
1980s.
Comparative Specifications
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 7/26
WAP–3 A variant of the WAP-1, originally classified WAP-1 FMII, produced in 1987 by CLW. There
were 5 of these converted from WAP-1 locos. The first WAP-3 "Jawahar", #22005, Jan. 4, 1987) was
used for the Taj Exp. for some time. Essentially the same as WAP-1 but with different Flexicoil bogies
(Flexicoil Mark II for the earlier ones, and Flexicoil Mark 4 (fabricated bogies) for some of the later ones,
etc.). These locos could only haul 19-coach rakes for the Rajdhani and other prestigious Express trains
for which they had been designed, and further required assisting locos on moderately graded sections,
and so did not meet their design goals. Max. speed 140km/h.
Note: All units have been converted back to the 'WAP-1' class (since about 1997?). #22003, #22005
were among the first to be so converted and and are still [7/02] in use.
Manufacturers: CLW
Traction Motors: Alstom/CLW - TAO 659 (575kW (770hp), 750V, 1095 rpm) Axle-hung, nose-suspended,
force-ventilated.
Transformer: BHEL type HETT-3900, 3900 kVA. 32 taps.
Rectifiers: Two silicon rectifiers, with S18FN35 cells (by Hind Rectifier) with 64 cells per unit.
2700A/1050V.
Axle load: 18.8t.
Bogies: Co-Co Fabricated bogie assembly (Flexicoil Mark II and later Mark IV; the latter are somewhat
similar to Alco's HiAd bogies).
Pantographs: Two Faiveley AM-12.
Comparative Specifications
WAP–4 Variant of WAP-1 with Hitachi H5 15250 motors
(built by CLW), built in 1994 to RDSO specifications. The need
to run longer passenger trains (24 to 26 coaches as against
the 19-coach capacity of the WAP-1 / WAP-3 locos), and also to
eliminate the need for bankers in graded sections (e.g., the
busy Itarsi-Nagpur section) led RDSO to consider an upgraded
design of the WAP-1 loco and the WAP-4 loco design was
published in November 1993. Indigenously designed, higher
power rated silicon rectifiers and indigenously-designed
5400kVA transformer. Locomotive reliability is also increased
by the use of Hitachi traction motors. Air brakes for loco and train. Different underframe design to handle
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 8/26
larger buffing loads. Cast bogie, Flexicoil Mark 1 design. Weight kept to 112t by the use of aluminium
plates, thinner underframe, and reducing some components such as sanders. Motors grouped in 6P
combination; weak field operation possible.
[2/00] New versions of these with twin-beam headlights, speed recorders and some changes to the
control electronics have been rolling out recently [7/00]. WAP-4E are most likely just regular WAP-4 locos
from the Vadodara shed. The 'E' suffix is thought to come from the short-lived RDSO directive to denote
all air-braked locos and is redundant with the WAP-4 locos (e.g., WAP-1E). There is speculation that
some of these locomotives may have some additional features such
as an electronic sensor for detecting loss of pressure in brake pipes
(hence, sometimes the 'E' suffix is explained as 'electronic', although
this seems unlikely). More recently [1/05] many of these have been
fitted with train-parting / pressure loss alarms, and data recorders for
speed, energy consumption, etc. All the new ones have roof mounted
twin beam headlights, square WAP-5 type windscreens and a digital
notch repeater along with a better layout and good seats for the
drivers. Some [12/04] even have windshield washers. A few were
provided with signalling lamps on the sides but this does not have
seem to have continued with the newer units.
[1/03] Although these are officially rated at 140km/h, there are
reports that one or more of these have been tested by CLW at up to
169.5km/h.
As of [11/04] this class is still in production at CLW.
Note on the traction motors : The Alstom-designed 770hp TAO motors
used in the WAP-1 and WAP-3 were seen as the weak link in the
reliability of the locos for passenger train use. At the time, Hitachi
motors of 840hp were in use on freight locos and had very high
reliability, but adapting them for use with a passenger loco proved a formidable challenge because of the
weight constraints. The WAP-4 design efforts involved many modifications for weight reduction, including
a lighter underframe, aluminium foil-wound transformer, and the use of aluminium chequered plates, and
these have allowed the use of the heavier, but more powerful and more reliable Hitachi motors on the
WAP-4 locos.
Manufacturers: CLW
Traction Motors: Hitachi HS15250 (630kW, 750V, 900A. 895rpm. Weight 3500kg). Axle-hung, nose-
suspended, force ventilated, taper roller bearings.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 9/26
Gear Ratio: 23:58 (One loco, #22559, is said to have a 23:59 ratio.)
Transformer: 5400kVA, 32 taps
Rectifiers: Two silicon rectifiers, (ratings?).
Axle load: 18.8t.
Bogies: Co-Co Flexicoil Mark 1 cast bogies; primary and secondary wheel springs with bolsters
Pantographs: Two Stone India (Calcutta) AM-12.
Current Ratings: 1000A/10min, 900A continuous
Tractive Effort: 30.8t
A 24-coach (1430t) passenger rake can be accelerated to 110km/h in 338 seconds (over 6.9km) by a
WAP-4; to 120km/h in 455 sec. (10.5km); and to 130km/h in 741 sec. (20.5km).
Comparative Specifications
WAP–5 This class started with a batch of 10 locos
(#30000-30010, skipping #30008) imported from ABB /
AdTranz in 1995 (Actually 11 were imported but one (#30008)
was damaged by fire in transit and deemed unusable on
arrival. It was then used as a bank of spare parts for the
others.) These are among the few currently [5/99] with IR to
have an advanced design with GTO thyristor converters and 3-
phase asynchronous motors. CLW has been manufacturing the
motors since Feb. 24, 2000. Rated top speed is 160km/h,
although in trials a WAP-5 loco is said to have been run at 184km/h. Continuous power at wheel rim is
4000kW (5450hp). A WAP-5 can take a 24-coach passenger train to 110km/h in 324 seconds. Wheel
arrangement is Bo-Bo. Auxiliaries from ABB, Howden Safanco, BEHR, etc. [1/03] Although these are
officially rated at 160km/h, one of these has been tested by CLW at up to 184km/h. These locos are
intended for use with high-speed medium load trains such as the Rajdhani and Shatabdi trains, in
contrast to the WAP-7 (see below) which is more powerful but which is intended for lower-speed
haulage of heavier trains.
Other notable features of this loco are the provision of taps from the main loco transformers for hotel
load, pantry loads, flexible gear coupling, wheel-mounted disc brakes, and a potential for speed
enhancement to 200km/h. 78t weight. Braking systems include regenerative braking (160kN), loco disc
brakes, automatic train air brakes, and a charged spring parking brake. MU operation possible with a
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 10/26
maximum of two locos.
[2/00] Currently, [9/03] four indigenous WAP-5's from CLW (first one built May 17, 2000) with somewhat
different contours, and electricals from BHEL, are homed at Ghaziabad shed. (#30011 'Navodit', #30012,
'Navajagaran', #30013 'Navakriti', and #30014).
Being homed at sheds in the north, they are understandably in use for northern routes, but recently
[12/01] some have been spotted regularly as far south as Chennai. In 2000, plans were announced for
variants with 6000hp power and 200km/h capability to be manufactured, but nothing has been heard
since on that front. After the first four were built by CLW, there seems to have been a pause in the
manufacture of this class at CLW, and as of [11/04], more were expected to be produced but it was not
known when production would resume. A problem with the Hurth coupling and its indigenous
replacement seem to have been part of the delay, but the locally manufactured components have now
[12/04] passed trials.
Air-conditioning: The original design called for these locos to have air-conditioned cabs. This, however,
has been dogged by controversy over costs and fitment, and the first units made by CLW do not have
air-conditioned cabs. One of the ABB units, #30000, does have air-conditioning, fitted by the Ghaziabad
shed as an experiment. The Ghaziabad shed may be planning to retrofit some of its other WAP-5 locos
with air-conditioning.
Manufacturers: ABB / CLW
Traction Motors: ABB's 6FXA 7059 3-phase squirrel cage induction motors (1150kW, 2180V, 370/450A,
1583/3147 rpm) Weight 2050kg. Forced-air ventilation, fully suspended. Torque 6930/10000Nm. 96%
efficiency.
Gear Ratio: 67:35:17. (3-stage gears)
Transformer: ABB's LOT-7500. 7475kVA primary, 4x1450kVA secondary.
Power Drive: Power convertor from ABB, type UW-2423-2810 with SG 3000G X H24 GTO thyristors (D
921S45 T diodes), 14 thyristors per unit (two units). Line convertor rated at 2 x 1269V @ 50Hz, with DC
link voltage of 2180V. Drive convertor rated at 2180V phase to phase, 953A output current per phase,
motor frequency from 0 to 160Hz.
Axle load: 19.5t
Bogies: Bo-Bo Henschel Flexifloat; bogie centre distance 10200mm; bogie wheel base 2800mm
Unsprung mass per axle: 2.69t
Pantographs: Two Stone India (Calcutta) AN-12.
Wheel diameter: 1092mm new, 1016mm worn
Wheel base: 13000mm
Length over buffers: 18162mm
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 11/26
Length over headstocks: 19280mm
Body width: 3142mmn
Cab length: 2434mm
Pantograph locked down height: 4537mm
Tractive Effort: 26.3t
A 24-coach (1430t) passenger rake can be accelerated to 110km/h in 312 seconds (over 6km) by a WAP-
5; to 120km/h in 402 sec. (6.9km); and to 130km/h in 556 sec. (14.2km).
Comparative Specifications
WAP–6 [12/08] All locos in the class have been
converted to WAP-4. This class was really a variant of the WAP-
4 design. One or two prototypes were built early from existing
WAP-1 or WAP-4 locos without renumbering. WAP-4 #22212
(formerly a WAP-1) was the first to be converted to a WAP-6; it
was provided with Flexicoil bogies and other upgrades. Later
this particular loco was later converted back to a WAP-4 (and
even refitted with the standard WAP-4 bogies). Curiously, it
spent a long time with both class codes WAP-4 and WAP-6 on it.
Later, more WAP-1 locos were regeared and provided with high-adhesion fabricated bogies (Flexicoil
Mark IV) which are somewhat similar to the Alco Hi-Adhesion bogies. About 16 (perhaps more) of these
were built (All in the number series 22400-22416.) Of railfan interest is the fact that some of them reveal
their origins in the form of the old WAP-4 class code being still evident -- often a '6' is crudely repainted
over the '4' which is still visible.
They were intended for service at 160km/h but failed trials and were restricted to a top speed of
105km/h. They were then used for less prestigious trains such as the Amritsar Exp., Doon Exp., or Janata
Expresses.
The remaining ones (thought to be 13 in number) are now [4/02] homed at Asansol. It is reported [5/02]
that some of these (perhaps only two, #22406, #22408) have been upgraded with better wheelsets,
etc., so that they are now capable of higher speeds (max. 160km/h?). [1/05]One loco #22410 looks to
have been converted to a WAP-4 and is now homed at Howrah. Air brakes for loco and train provided as
original equipment. Auxiliaries from Best & Crommpton, S F India, Accel/Flakt, Elgi, etc
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 12/26
It appears that the WAP-6 were a failed experiment in upgrading the basic WAP design using different
Flexicoil bogies and other changes.. When the performance of these units proved unsatisfactory, IR
switched to improving the WAP-4 loco and stuck to that design instead.
Manufacturers: CLW
Traction Motors: Hitachi HS15250 (See description under WAP-4.) Axle-hung, nose-suspended, force-
ventilated.
Gear Ratio: 58:23
Transformer: CCL make, aluminium coil. 5400kVA. 32 taps.
Rectifiers: Two silicon rectifier cubicles. 2700A/1050V.
Axle load: 18.8t.
Bogies: Fabricated Flexicoil Mark IV bogies.
Comparative Specifications
WAP–7 [11/00] Identical to WAG-9 (see below) with
modified gear ratio (72:20) and application software. 140km/h
(130km/h?) top speed. 6125hp max. power; 6000hp
continuous at wheel rim. At 123t, it is much heavier than the
78t WAP-5. Intended to haul heavier, 26-coach passenger
trains and passenger/parcel mixed trains. The first one,
Navkiran, #30201, which was commissioned in 2000, is homed
at Gomoh although it has been seen [8/00] at Ghaziabad as
well.
Initial models were rated at 6125hp total power and 33000
kgf (323kN) tractive effort. Modifications during continuing trials resulted in improved performance with
the loco now yielding 6350hp total power and 36000 kgf (352.8kN) tractive effort. In the trial runs [7/02]
the upgraded WAP-7 #30203 was shown able to take a 24-coach train to 110km/h in just 235 to 245
seconds (compare: 324 seconds for a WAP-5). Braking systems as in the WAP-5, with regenerative
braking rated at 183kN in the first units and 260kN in the later ones.
Earlier trials with WAP-7 locos had yielded times around 390 seconds for the same test, which had cast
doubts on the future of this loco class which was designed to perform better than the WAP-5. After some
trials with the Prayagraj Exp. in early 2002, now [11/02] the WAP-7 is being used to haul the 24-coach
rake of ER's Poorva Exp. and will presumably soon be used for other trains as well. Max. tested speed is
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 13/26
160km/h, rated for 140km/h.
Better performing variants of the WAP-7 have been under development [9/04]; changes are said to
include higher capacity components (including the main transformer) to allow stall-free running on 1:100
gradients, and a higher tractive effort of 42000 kgf (411kN). Some of the units starting around #30212
are also thought to have some enhancements in comparison to the very first ones. [11/04] Other plans
by CLW for this loco class are said to include the provision of IGBT control, greater automation of some
control tasks, and in-cab signalling. MU operation possible with a maximum of two locos.
The WAP-7 appears to have returned to the older (WAM, earlier WAP) style of pantograph with a single
collector bar instead of the double collector bar used for the WAG-9.
Manufacturers: CLW
Traction Motors: 6FRA 6068 3-phase squirrel-cage induction motors (850kW, 2180V, 1283/2484 rpm,
270/310A. Weight 2100kg, forced-air ventilation, axle-hung, nose-suspended. Torque 6330/7140Nm.
95% efficiency.)
Gear Ratio: 72:20
Axle load: 20.5t
Wheel diameter: 1092mm new, 1016mm worn
Wheel base: 15700mm
Bogies: Co-Co, ABB bogies; bogie wheel base 1850mm + 1850mm
Unsprung mass per axle: 3.984t
Length over buffers: 20562mm
Length over headstocks: 19280mm
Body width: 3152mmn
Cab length: 2434mm
Pantograph locked down height: 4525mm
Tractive Effort: 36.0t
A 24-coach (1430t) passenger rake can be accelerated to 110km/h in 240 seconds (over 4.7km) by a
WAP-7; to 120km/h in 304 sec. (6.7km); and to 130km/h in 394 sec. (9.9km).
Comparative Specifications
WAP–7D As of early 2011, this is a proposed loco design by RDSO - based on the WAP-7, but
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 14/26
with IGBT drives, and some changes to components resulting in a somewhat lower total weight.
WAG–1 Among the first AC electrics to run in India. Early
ones were imported from European manufacturers (1963). The
first one built in India was named 'Bidhaan' (Nov. 16, 1963).
Typically French features include elongated 'D'-shaped buffers.
The Indian modifications included addition of a cowcatcher, CBC
couplers, and a large roof-mounted searchlight-style head lamp.
Although sterling performers, some of their highly advanced
features such as the spring-borne traction motors, etc., did not
suit Indian conditions.
They had monomotor bogies with B-B wheel arrangements, Jacquemin drives (?), and excitron rectifiers.
Air brakes for loco, vacuum train brakes as original equipment. Regenerative braking provided. MU
operation up to 4 units. Motors are permanently connected in parallel; speed control by transformer
taps.
Several were based at Arakkonam, Vijayawada, and other places. Most were decommissioned by the
1990s, although a few were seen still in use in 2000 or so (Godhra, Renigunta-Gudur, etc.). None were
known to be in use after 2002.
Two units (the last ones) built by CLW in 1964 are sometimes denoted WAG-1S; it is not clear how they
are different from the others.
Traction Motors: AEC/Alstom/Siemens MG1420. Two motors (monomotor bogies), force-ventilated, fully
suspended.
Gear Ratio: 3.95:1
Transformer: MFO, type BOT 3150. 22.5kV / 3000kVA. 32 taps.
Rectifiers: Secheron A268 Excitrons (four). 510A / 1250V.
Axle load: 21.3t
Max. Haulage: 1820t
Pantographs: Two Faiveley AM-12
Comparative Specifications
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 15/26
WAG–2 A few can still [5/01] be seen near Bhusawal and
Agra. The DC traction motors were supplied power through silicon
rectifiers. Just after they were imported from Japan, they were
based at Asansol shed of ER and transferred to Bhusawal and
Itarsi sheds of CR in 1985. Bhuawal had large numbers of them
into the 1990s. Monomotor design: two bogie-mounted traction
motors, permanently coupled in parallel; speed control is by
transformer taps. Each traction motor is coupled to two axles. Air
loco brakes and vacuum train brakes are original equipment.
Rheostatic braking provided. Westinghouse compressor, Northey
exhauster. MU operation possible (? how many units).
Traction Motors: Hitachi EFCO HKK (1270kW, 1250V, 1080A, 695rpm, weight 5300kg).
Transformer: Hitachi AFI AMOC. 32 taps.
Rectifiers: AEV-48 silicon rectifiers, 2040A / 2550kW.
Pantographs: Two Faiveley AM-12
Comparative Specifications
WAG–3 Ten locomotives of this class were supplied by the 50 cycles group in Europe. Monomotor
bogie design. 3150hp, silicon rectifiers. MU operation up to 4 units possible. Air loco brakes, vacuum train
brakes are original equipment, as is rheostatic braking.
Traction Motors: AGEC make, type 1580 A1 (1270V, 1040A, 680 rpm. Weight 5850kg.) Bogie mounted.
Gear Ratio: 3.95 : 1
Transformer: Oerlikon BOT 3460. 32 taps.
Rectifiers: Two GL 82220 silicon rectifiers, 1000A/1270kW/1270V. Weight 650kg each.
Pantographs: Two Faiveley AM-12
Comparative Specifications
WAG–4 3150hp. Built by Chittaranjan with components from the 50 cycles European consortium.
B-B monomotor bogies, silicon rectifiers. Some on NR at Kanpur. Air loco brakes, vacuum train brakes,
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 16/26
rheostatic brakes. The DC traction motors for these were the first to be manufactured indigenously by
CLW. CLW built 339 of these motors starting in 1964, until about 1993.
Traction Motors: AGEC make, MG 1580 A1 (1160kW, 1270V, 1040A, 690 rpm, weight 5850kg). Fully
suspended, bogie-mounted.
Gear Ratio: 3.95 : 1
Transformer: Oerlikon BOT 3460. 32 taps.
Rectifiers: Two GL 82220 silicon rectifiers, 1000A/1270kW/1270V. Weight 650kg each.
Axle Load: 21.9t
Hauling capacity: 2000t
Comparative Specifications
WAG–5 Introduced in 1984. Power 3850hp (some
documents say 3900hp, which may be a later modification), 6-
axled (Co-Co). Starting TE 382kN (33500kgf); continuous TE
202kN (20600kgf). Adhesion 29%. A very successful class, and
probably the one with the most numbers produced. There are
many variants of these, starting with the plain WAG-5. WAG-
5A locos have Alsthom motors. Later versions were WAG-
5Hand variants with Hitachi motors: WAG-5HA by CLW, with
high-adhesion bogies, and WAG-5HB built by BHEL to RDSO's
specifications.
(Note:
Lallaguda
shed uses the
simple code
'WAG-5' for
locos that
would normally
be denoted
'WAG-5HA'.)
[4/02] Newer versions have been spotted: WAG-5HG, WAG-5HR, WAG-5RH (here the 'R' is believed to
denote rheostatic braking, but not all WAG-5 class locos that have rheostatic braking use this
suffix),WAG-5D, WAG-5P for fast passenger traffic (mail and express trains) with gear ratio 21:85.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 17/26
etc,. WAG-5HE variants are believed to have Hitachi traction motors and only air brakes.
The detailed differences among these variants are not precisely known. Specifications for the base WAG-
5 model are given below. Some of the variants are known to have different gearing and equipment, and
different rated speeds. The original WAG-5 units had a top speed of 80km/h. Many variants have a gear
ratio of 21:58, the same as that of the WAM-4 6P, which allows these WAG-5 locos to be used for mixed
applications including hauling passenger trains at 100km/h.
Auxiliaries are from many sources: typically Elgi compressors, Northey exhausters, and other equipment
from S F India, but many variations exist. Speed control by parallel combinations of motors and weak field
operation. Air brakes for loco, dual train brakes are original equipment.
Although a great improvement over earlier locomotive classes, the WAG-5 models do have limitations,
one of which is the inability to start and haul large loads (4700t -- 58 BOXN wagons) on gradients
steeper than 1:200 or so.WAG-5 locos can be used as multiple units in configurations of 2, 3, 4, or more
locos.
With the large influx of WAG-7 and WAG-9 locos in recent years, many WAG-5 locos are now also being
put to use hauling local passenger trains. Some such as the WAG-5E loco #23989 'Krishnaveni' (of
Vijayawada [1/04]) have also been modified for this purpose in their interior equipment as well as some
of the exterior aspects. For some reason, the BHEL-built WAG-5HA / 5HB locos are never seen used with
passenger trains. All of the WAG-5HB units are at Jhansi near BHEL's own installations so that BHEL can
handle their maintenance.
The WAG-5B locos are converted WAM-4 units. These have road numbers in the range - 21101 to
21138. This is believed to have stemmed from a decision to have a separate line of freight loco models
based on the highly versatile and successful WAM-4 family of locos.
In the external appearance of WAG-5 locos, it can be seen that locomotives with road numbers up until
23293 have side louvres and round glass windows like the WAM-4 locos showing the legacy of the WAM-
4 design. From number 23294 onwards the locos have the newer WAP-4/WAG-7 style of louvres, thought
to be for better ventilation.
More recently WAG-5 locos of all types have been retrofitted with data loggers, flasher lights, train
parting alarms, etc.
WAG-5 #23026, homed at Bhusawal, was selected for a trial project by the RDSO to develop designs for
adoption of thyristor controlled electricals for the tap changer based locomotives in 1995. The project
was began in 1992 because there was an increasing dearth of suppliers for the tap changer control, it
was inefficient and so the new system, promising better performance, was to be retrofitted after trials
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 18/26
into all the older locos. A prototype system, developed in collaboration with Bhabha Atomic Research
Centre, was fitted in this locomotive and trials were carried out between 1997 and 1998. However, due
to several problems, the biggest of which was intereference caused with signalling equipment, the
project was dropped in 1999. The loco was then refitted with the standard equipment and brought into
service as a WAG-5P which it is till this date [1/05].
Traction Motors: Alstom TAO 659 (575kW, 750V, 1070 rpm) or TAO 656; or Hitachi HS 15250A (See
description under WAP-4.) Axle-hung, nose-suspended. Six motors.
Gear Ratio: 62:16 or 62:15 with Alstom motors, some 64:18 (Hitachi motors), many now 58:21 for mixed
use.
Transformer: BHEL, type HETT-3900. 3900kVA, 22.5kV, 182A. 32 taps.
Rectifiers: Silicon rectifiers (two) using 64 S-18FN-350 diodes each from Hind Rectifier. 2700A / 1050V
per cubicle.
Bogies: Co-Co cast bogies (Alco asymmetric trimount -- shared with WDM-2, WAM-4).
Axle load: 20t
Max. Haulage: 2375t
Pantographs: Two Faiveley AM-12
Current Ratings: 1100A/10min, 750A continuous
Comparative Specifications
WAG–6 WAG-6A models are from ASEA (bodies by SGP
in Austria and transported to ASEA, Västerås, Sweden on
freight wagon type bogies. Trivia: The second body (26001)
passed Malmö in southern Sweden on 1987-09-01). ASEA had
a specially constructed piece of 1.676m Indian broad-gauge
line to allow testing of the locomotives before delivery. Delivery
was to Göteborg harbour on standard-gauge bogies, where
they were fitted with broad-gauge bogies before they were
placed on board. The first shipping was planned to begin
December 1987 with another batch in January 1988, although
the actual shipping dates were probably later. The WAG-6B and WAG-6C models are from Hitachi. They
are all 6000hp locos with thyristor-controlled DC traction motors. Until about 1993 they were the most
powerful freight locos in IR's fleet. The development of this technology (chopper control) stopped when
the (better) AC motor technology was introduced in IR in the form of the WAP-5 and WAG-9 locomotives.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 19/26
Six bogie-mounted separately excited DC traction motors are used, and speed control is via the
manipulation of the phase angle by a thyristor converter and a separately powered field coil.
Microprocessor control with ground speed detection (slip control) and creep control system to maximize
adhesion. Air brakes for loco and train; dynamic brakes provided. WAG-6A and WAG-6B locos have Bo-Bo-
Bo wheel arrangements, whereas the WAG-6C locos have a Co-Co arrangement. The WAG-6 series locos
are the only ones with 'vestibules' to connect between MU'd locos. WAG-6A locos have half-height
vestibules and WAG-6B and WAG-6C locos have full-height vestibules.
The WAG-6A body shells were built by SGP in Austria; the rest of the locos were built and the entire units
assembled in Västerås, Sweden by ASEA. ASEA constructed a special length of 1.67m (BG) track for
testing these before delivery. The locos were fitted with BG bogies at Göteborg harbour after being
transported there on standard gauge bogies. The first WAG-6A was delivered around December 1987
and the remaining five in January 1988.
All WAG-6 locos were (are [1/04]) at Waltair (Vishakhapatnam)
and have generally been used for ore freights and material
trains on the Kirandul-Kottavalasa line. Until about 1999 or
2000, they were in regular service, although maintenance
problems began affecting their service from about 1997. Later,
repeated problems have been experienced with the
unavailability of spare parts which kept them from getting
needed periodic overhauls. In Oct. 2002 the WAG-6A were
technically suspended from operations for POH for a while. Most
of the WAG-6B and WAG-6C were also similarly suspended at different times.
However, many of them still labour on – see below. Spare parts have since been ordered for them
[12/03] as special case procurement in some cases, and indigenous manufacturers have been invited to
duplicate parts that are no longer available from the original manufacturers. In some cases parts are
cannibalized from one loco for another. A particular electronic card for the on-board computer is said to
be [1/04] in severe short supply and unavailable from ABB and Hitachi; ECIL and DRDO are attempting to
duplicate them. It is alleged that these locos were procured by the Railway Ministry without consultation
with RDSO, hence the problems with maintenance and spares. For political reasons, it is also considered
not feasible to simply scrap these locos right away.
Status [1/04] WAG-6A locos #26000, #26001, #26002 and #26005 were in working order and used on
the KK line. #26003 and #26004 were awaiting POH. WAG-6B locos #26010, #26011, #26012 and
#26013 were under POH. #26010 went on a trial run to S. Kota and returned with some minor problems
but will be ready to re-enter service MU'd with #26011 which is almost ready. WAG-6B locos #26014 and
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 20/26
#26015 were waiting their turn for POH. Of the WAG-6C locos, all six (#26020 - #26025) were in regular
use on the KK line; one or two of them have shown issues with wheel slip.
Status [8/05] Of 18 locomotives, 14 are said to be in service, 2 getting their POH, and 2 are out of
service awaiting POH.
The WAG-6A models are said to be upgradable to 160km/h but IR never tried this out. All WAG-6 variants
can be used in MU pairs but not with more than 2 locos.
Traction Motors: ASEA make (WAG-6A), L3 M 450-2. Six motors, fully suspended, force-ventilated,
separately excited, 3100kg ; (WAG-6B) Hitachi HS 15556-OIR, bogie mounted, force-ventilated,
compound-wound, 3200kg ; (WAG-6C) Hitachi HS 15256-UIR, axle-hung nose-suspended, force-
ventilated, compound-wound, 3650kg.
Transformer: (WAG-6A) ASEA: TMZ 21, 7533kVA; (WAG-6B/C) Hitachi AFIC-MS, 6325kVA.
Thyristor controller: (WAG-6A) 24 YST 45-26P24C thyristors each with 24 YSD35-OIP26 diodes,
2x511V, 2x4500A; (WAG-6B/C) 32 CGOIDA thyristors each with 24 DSP2500A diodes. 2x720A, 850V.
Pantographs: (WAG-6A) Two Stemman BS 95; (WAG-6B/C) Two Faiveley LV2600
Comparative Specifications
WAG–7 Built by CLW to RDSO specifications, these
represent the next indigenous design step up from the WAG-5
locomotives. Used primarily for goods haulage, these locos have a
Co-Co wheel arrangement with high-adhesion bogies (shared with
WCAG-1, WCAM-3, WDG-2/3A) and Hitachi motors providing
5000hp. Starting TE 402kN (41000kgf); continuous TE 235kN
(24000kgf). Adhesion 34.5%. The higher tractive effort compared
to the WAG-5 locos allows them to attain higher balancing speeds
under load. The first 71 of these all went to the Mughalsarai shed.
Kanpur was the second shed to get these locos.
Traction motors are permanently coupled in parallel and speed control is through the use of transformer
taps. Max. speed is 100km/h. Air brakes and dynamic (rheostatic) brakes for loco, dual train brakes. MU
operation with up to 4 units is possible. Traction equipment such as the smoothing reactor, etc., are all
higher rated than in the WAG-5 due to the higher currents this loco draws. Auxiliaries include Rigi
compressor, Arno rotary converters, Siemens smoothing reactor, Northey exhauster; other auxiliaries
such as blowers from S F India. A number of these locos have been retrofitted with static converters to
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 21/26
power the auxiliaries, replacing the older Arno rotary converters. These static converters are more
efficient and require less maintenance, besides having self-diagnostic systems to make troubleshooting
easier.
These locos too, have limitations similar to the WAG-5 in not
being able to start and haul 4500-4700t loads on gradients
steeper than 1:200. When they were being designed and
introduced, experiments were carried out to vary the gear ratio.
The high-adhesion bogies also underwent some modifications
for reduction of weight transfer.
The WAG-7H designation is applied to two locomotives of the
WAG-7 class that were experimentally modified to provide higher
TE by increasing their weight. Oscillation trials were conducted
on a ballasted WAG-7 (#27002) around 1995, and then a new WAG-7 loco was built by CLW to have
higher weight using thicker plates in the underframe of the loco (#27061, 1995). Weight is 132t, max. TE
441kN (45000 kgf). Traction motors are Hitachi HS15250-G, perhaps a minor variant of HS15250.
[4/04] Newer WAG-7's have been spotted (e.g., #27455 'Samrat') that externally look somewhat like a
WAG-9 and with several improvements such as closed-circuit cameras for monitoring the pantograph and
GR, a spotlight to illuminate the pantograph at night, large green lamps to exchange signals on the run,
fog lamps, and single-piece windshield. New Katni shed is especially known to add the OHE monitoring
equipment to WAG-7 locos. Cabs of some units are air-conditioned. Newer batches of WAG-7's [12/04]
also have data loggers and train parting alarms (based on sensors for detecting loss of brake pressure),
as standard equipment. They are also said to have 'microprocessor control' although it is not clear what
this implies.
Traction Motors: Hitachi HS15250-G (a variant of the standard HS15250 with higher current rating
(thicker wire gauge, better insulation); see description under WAP-4.) Motors built by CLW and BHEL.
Gear Ratio: 65:18 (65:16?)
Transformer: CCL India, type CGTT-5400, 5400kVA, 32 taps.
Rectifiers: Two silicon rectifiers, cell type S18FN350 (from Hind Rectifier), 64 per bridge, 2700A / 1050V
per cubicle.
Axle load: 20.5t
Bogies: Alco High-Adhesion bogies, fabricated bogie frame assembly, with unidirectional mounting of
traction motors, primary and secondary suspension.
Hauling Capacity: 3010t
Pantographs: Two Stone India (Calcutta) type AN-12.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 22/26
Current Ratings: 1350A/2min, 1200A/10min, 960A/hr, 900A continuous
Comparative Specifications
WAG–8 Extremely rare, is about all one can say about this experimental class. These locos (not
sure if there was just 1 or 2) were built by BHEL in 1996 and are similar in appearance to the WCAM-2
locos. In power, similar to the WAG-7 at 5000hp. Thyristor chopper control of the DC motors. It probably
shared some components with the WCAM-3 which BHEL was building at the time. Thought to have
Flexicoil Mark IV hi-adhesion bogies. More details??
Comparative Specifications
WAG–9 These are essentially the same as the WAP-7
units, with some differences in gearing and the control software
to make them suitable for freight operations. The first few were
imported from ABB (6 fully assembled and 16 in kit form (7
completely knocked down, the rest partially assembled), in
1996). These are numbered 31000 to 31021.
In November 1998, CLW started producing these with
indigenous components. The first one, 'Navyug' (translated, 'New
Era'), was flagged off on Nov. 14. They have (like the WAP-5
units) GTO thyristor converters and 3-phase asynchronous motors.
Manufacture of the traction motors at CLW started on Jan. 11, 1999. Rated at 6125hp each, two units
can haul 4500t trains on gradients of 1:60. A single unit can start a 4700t load (58 BOXN wagons) on a
gradient of 1:180 (some CLW documents say 1:150), a great improvement over the WAG-5/WAG-7 locos
that were restricted to hauling such loads in sections of gradients 1:200 or less (this was the primary
motivation behind the induction of the 3-phase technology for freight locos). Total weight 123t.
Continuous power at wheel rims 4500kW (6000hp). Starting TE 520kN; continuous TE 325kN.
They also generally have better adhesion than the WAG-5/WAG-7 locos, partly because of the
computerized slip control. Rated top speed is 100km/h. Axles Co-Co. Pantograph has a double collector
bar in the Adtranz-built units; the CLW-built units use a pantograph with a single collector pan, as in
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 23/26
other AC electrics. Multiple unit operation possible; although the locomotive designs provide for several
units to be MU'd together, IR restricts these to just two units being coupled at a time because of dynamic
loading restrictions on most bridges.
Auxiliaries from ABB, Landert, Behr, Howden Safanco, etc. Regenerative brakes provide about 260kN of
braking effort.
[7/02] So far about 49 are in service (22 imported as mentioned above, the rest from CLW). One
(#31008) was damaged by fire while working a train on NR.
Manufacturers: ABB, CLW
Traction Motors: ABB's 6FRA 6068 (850kW, 2180V, 1283/2484 rpm, 270/310A. Weight 2100kg) Axle-
hung, nose-suspended.
Gear Ratio: 77:15 / 64:18
Transformer: ABB's LOT 6500, 4x1450kVA.
Power Drive: Power convertor from ABB, type UW-2423-2810 with SG 3000G X H24 GTO thyristors (D
921S45 T diodes), 14 thyristors per unit (two units). Line convertor rated at 2 x 1269V @ 50Hz, with DC
link voltage of 2800V. Motor/drive convertor rated at 2180V phase to phase, 971A output current per
phase, motor frequency from 0 to 132Hz.
Hauling capacity: 4250t
Bogies: Co-Co, ABB bogies; bogie wheel base 1850mm + 1850mm
Wheel base: 15700mm
Axle load: 20.5t
Unsprung mass per axle: 3.984t
Length over buffers: 20562mm
Length over headstocks: 19280mm
Body width: 3152mmn
Cab length: 2434mm
Pantographs: Two Secheron ES10 1Q3-2500.
Pantograph locked down height: 4525mm
Comparative Specifications
WAG–9H A heavier variant of the WAG-9 (12t extra ballast, welded at four locations in the
machine room behind the cabs -- a design proposed by CLW and approved by AdTranz) and
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 24/26
consequently higher TE. Everything else was just as in the
WAG-9 class, except for some application software changes.
This was expected to be used in haul heavy freights (58 BOXN
wagons, 4700t) without the need for multiple units even on
incline sections of 1:150. The ballasting raised the starting TE
from 460kN to 520kN. Continuous TE 325kN. The first (and only,
as it turned out) of this class was was commissioned on June
30, 2000. This locomotive, #30130, 'Navshakti', then homed at
Gomoh, cleared trials but because of concerns about the
weight, did not enter regular service. It was deballasted and converted to a plain WAG-9 by mid-2002.
That was the only unit of this class ever tried out. The class was intended for MU operation (2
units). Trivia: This reclassified loco, now [11/04] at the Ajni shed, still sports its variant livery with two
white stripes instead of the single yellow stripe characteristic of other WAG-9 locos.
Manufacturers: ABB, CLW
Traction Motors: ABB's 6FRA 6068 3-phase squirrel-cage induction motors (850kW, 2180V, 1283/2484
rpm, 270/310A. Weight 2100kg) Axle-hung, nose-suspended.
Gear Ratio: 77:15 / 64:18
Transformer: ABB's LOT 6500, 4x1450kVA.
Power Drive: Power convertor from ABB, type UW-2423-2810 with SG 3000G X H24 GTO thyristors (D
921S45 T diodes), 14 thyristors per unit (two units). Line convertor rated at 2 x 1269V @ 50Hz, with DC
link voltage of 2800V. Motor/drive convertor rated at 2180V phase to phase, 971A output current per
phase, motor frequency from 0 to 132Hz.
Axle load: 22.5t
Hauling capacity: 4700t
Bogies:Co-Co
Pantographs: Two Secheron ES10 1Q3-2500.
WAG–9I WAG-9 variant with IGBT control. Two inverter assemblies are provided for each bogie,
enabling per-axle isolation in the case of traction motor problems. Thus, if one traction motor fails, just its
axle can be unpowered, leaving the loco with 5000hp on the other axles. In earlier locos, there was one
GTO inverter per bogie, forcing two axles to be out of service in the case of a motor failure. CLW built the
first units in 2010, with components from ABB, BHEL, NELCO, and Bombardier. The earliest units were
homed at Gomoh, then also at Ajni.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 25/26
Traction Motors: ABB's 6FRA 6068 (850kW, 2180V, 1283/2484 rpm, 270/310A. Weight 2100kg) Axle-
hung, nose-suspended.
Gear Ratio: 77:15 / 64:18
Power Drive: IGBT drive
Hauling capacity: 4250t
Bogies: Co-Co, ABB bogies; bogie wheel base 1850mm + 1850mm
Wheel base: 15700mm
Axle load: 20.5t
Length over buffers: 20562mm
Length over headstocks: 19280mm
Body width: 3152mmn
Cab length: 2434mm
Pantographs: Two Secheron ES10 1Q3-2500.
Pantograph locked down height: 4525mm
YAM–1 These cute little B-B MG electrics, 20 in number (18
ordered first, two later) were supplied by Mitsubishi in 1964 and
worked on SR, especially in the Madras area, until the recent
conversion to BG of the mainline tracks. These were later [12/03]
run on the Tambaram - Villupuram section of the mainline. On June
30, 2004, the last YAM-1 run took place, minutes after the last MG
EMU service on the Chennai network reached the Tambaram
station. The remaining YAM-1 locos are now at Tambaram, only
occasionally energized for departmental work. One unit is [2/05]
at CLW, apparently undergoing preservation work prior to being
plinthed.
They have monomotor bogies, with two bogie-mounted DC motors permanently coupled in parallel. They
are not very powerful, although they have been used to haul some longish (50-wagon) goods trains on
occasion. Air brakes for loco, vacuum train brakes. Oerlikon compressor and exhauster, Arno rotary
convertors.
Now [11/01] one is said to be at the Chittaranjan Loco Works. There are rumours that some or all of
them may be refurbished and exported to some other country.
1/14/14 [IRFCA] Indian Railways FAQ: Locomotives -- Specific classes : AC Electric
www.irfca.org/faq/faq-loco2e.html 26/26
Manufacturers: Hitachi
Traction Motors: ACEC/Alstom/Siemens MG1420 (two). Fully suspended, force-ventilated. 5600kg.
1080kW, 1250V, 920A, 630 rpm
Gear Ratio: 3.95 : 1
Transformer: Mitsubishi 'Shell Sub', 1690kVA, 25 taps.
Rectifiers: Secheron excitron rectifiers, type A268 (four). 510A/1250V
Pantographs: Two Faiveley AM-12.
Comparative Specifications
Top Related