7/27/2019 iPlex Version 5.0 CLI Reference
1/80
7/27/2019 iPlex Version 5.0 CLI Reference
2/80
2
May, 2009
Published By TANDBERG
455 DeGuigne DriveSunnyvale, CA 94085-3890
Copyright 1998-2007 byTANDBERG Television.
Al l rights reser ved. No par t of the contents of this book may be reprodu ced or transmitted in anyform or by any means without the written permission of the publisher.
Contributors Technical Publications: Lena Jacobson
TANDBERG Television Engineering Department
Restricted
Rights
This document contains proprietar y and confident ial information ofTANDBERG Television . Thecontents of this document may not be disclosed to third parties, copied or duplicated in any form, in whole
or in part, without the prior written permission ofTANDBERG Television.
Use, duplication, or disclosure of the technical data contained in this document is subject to restrictions as set
forth in subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS52.227-7013 and/or in similar or successor clauses in the FAR, or in the DOD or NASA FAR Supplement.
Unpublished rights reserved under the Copyright Laws of the United States. Contractor/manufacturer isTANDBERG Television, 455 DeGuigne Drive, Sunnyvale, CA 94085-3890, USA. TANDBERG is aregistered trademark ofTANDBERG Television. All other names are trademarks of their respective
owners.TANDBERG Televis ion owns the following patents: U.S. Patent No. 6351474, 6351471,6292490, 6246701, 6195368, 6148082, 6111896, 6064676 and has additional U.S. patents pending.
GoAhead
Software
Licence
Copyright 2001 GoAhead Soft ware, Inc. All Rights Reserved. Unless GoAhead otherwise
instructs, the year 2001 is to be replaced with the year during which the release of the Original Codecontaining the notice is issued by GoAhead. If this year is not supplied with Documentation,GoAhead will supply it upon request.
Dolby Digital
Trademark
License
Dolby Laboratories encourages use of the Dolby Digital trademark to identify soundtracks that are
encoded in Dolby Digital. This is an effective way to inform listeners of the soundtrack format, and
the use of a standard logo promotes easy recognition in the market place. However, like anytrademark, the Dolby Digital logo may not be used without permission. Dolby Laboratoriestherefore provides a standard trademark license agreement for companies who wish to use Dolby
trademarks. This agreement should be signed by the company that owns the program material beingproduced. Recording studios or production facilities w hich provide audio production or encoding
services for outside clients generally do not require a trademark license. If you would like moreinformation on obtaining a Dolby trademark license, please contact Dolby Laboratories Licensing
Corporation. Information on trademark licensing plus instr uctions for using the Dolby Digitaltrademark and marking audio formats can also be found on-line at http://www.dolby.com.
Dolby Laboratories Licensing Corporation, 100 Potrero Ave., San Francisco, CA 94520 USA.
Phone: 415-558-0200, Fax: 415-863-1373, E-mail: [email protected], http://www.dolby.com
Technical
Support
For technical support, contactTANDBERG Television Customer Support through the World Wide Web(www.tandbergtv.com/services/skysupport_request.asp), via e-mail
([email protected]) or the Hot Line 1-877-475-9787.Document Number: 112-0115-02 Rev A
7/27/2019 iPlex Version 5.0 CLI Reference
3/80
3
Agency
Compliance
and Cautions
Safety: UL 60950 Third Edition, CSA-C22.2 No. 950-95, EN60950, IEC 950, CB Certificate, AS/NZ 3260,TS 001, Laser Safety: 21CRF1040Emissions: FCC Part 15 Class A, CISPR 22 Class A, EN55022 Class A, AS/NZ 3548Immunity: EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11,
EN61000-3-2, EN61000-3-3, EN300-386-2Telcordia: GR-63-CORE, GR-1089-CORE, SR-3580 NEBS Level 3
ETSI: EN300-019-1-1, EN300-019-1-2, EN300-019-1-3, EN300-132, EN300-386-2
FCC Class A
Compliance
TANDBERG Television iPlex equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to pa rt 15 of the FCC Ru le s. These limits are designed to providereasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmfulinterference, in which case the user will be required to correct the interference at personal expense.
Important
Safety
Information!
Please note the following:1 TheTANDBERG Television iPlex is intended for indoor use only.
2 In case of emergency, disconnect the power cords.
3 If power cords are not provided:- In the United States, use standard computer power cords (as specified below).- In Europe, for 230 volt operation, use a cord set marked HAR and consisting of a min 3 core
H05VVF3G075 cord that has a minimum 0.75 square mm diameter conductors, provided with an IEC320 receptacle and a male plug for the country of installation, rated 6A, 250V.
4 Do not block the equipment vents.
Read the following safety information thoroughly before installing this TANDBERG
Television product. Failure to follow this safety information may lead to personal injury or
damage to the equipment.
Power Supply
This unit must be grounded.
The unit must be connected to a grounded outlet to comply with product safety standards. Do not connect the power supply unit to an AC outlet without a ground connection. All power cords must be disconnected before servicing.
Power Cords
The plug on the power supply cords are considered to be the equipment disconnect device and must
be approved for the country where it is used.
For USA and Canada:
The cord set must be UL-approved and CSA-certified. The attachment plug must be an earth-grounding type with a NEMA 5-15P (15A 125V) plug
and a EN60320/IEC320 receptacle.
7/27/2019 iPlex Version 5.0 CLI Reference
4/80
4
System
Specifications
Dimensions(H x W x D): 23.50 X 17.40 X 1.75 in (59.69 x 44.20 x 4.45 cm)
Rack Mount: 1 Rack Unit: Standard 19 inch EIA rack
Weight: 24.5 lbs (11.14 kg) fully-configured
Shipping Weight: 39 lbs. (17.69 kg)
Airflow: 86 CFM normal operation 126 CFM maximum
Operating Temperature Range: 0 C to +40 C (+32 F to +104 F) Short-term Operating Temperature Range: -5 C to +55 C (+23 F to 131 F)
Non-operating Temperature Range: -40 C to +70 C (-40 F to +158 F)
Operating Humidity: 7% to 95% Non-condensing
Non-Operating Humidity: 5% to 95% Non-condensing
Operating Altitude: to 13,123 ft (4000 meters)
Input Power Requirement: 100-240 V AC 47/63 Hz @ 3/6 Amps
7/27/2019 iPlex Version 5.0 CLI Reference
5/80
5
Contents
Cover, Notices, and Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 1: Introducing TANDBERG Televis ion iPlex . . . . . . . . . . . . . . . . . . . . . 9
Introduction to the Command Line Interface Guide . . . . . . . . . . . . . . . . 10
Other iPlex Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contacting TANDBERG Television Customer Support . . . . . . . . . . . . . 11
Support Check List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 2: CLI Commands and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CLI Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Additional Connection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Interface Naming Convention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
UnitNumber and NumberUsed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CLI Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Backing Up the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Command Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
? (root) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
syncfs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Show Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7/27/2019 iPlex Version 5.0 CLI Reference
6/80
iPlex Command Line Interface Reference Guide
6
show running-config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
show chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
show iproute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
show interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
show interface TCPIn1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31show media-routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
show media-routes all all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
show stats gei1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
show stats blade1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
show stats ASIOut1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
show stats ENC1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
show program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
show program ASIIn1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
show program ENC1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35show stream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
show stream ASIIn1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
show element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
show element ASIIn1/5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
show vlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
show log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
show tech-support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
show serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
show ntpstatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Config Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Navigation in config-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Deleting by using no . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Configuration Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Key Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
[config] system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
[config] userLogging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
[config] redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46[config] snmp-server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
[config] security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
[config] interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
[config] interface ASIIn1/5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
[config] interface ASIOut1/6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
7/27/2019 iPlex Version 5.0 CLI Reference
7/80
iPlex Command Line Interface Reference Guide
7
[config] interface ENC1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
[config] interface ENC1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Teletext Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
[config] interface ATM1/5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
[config] interface ATMIn1/0 ATM1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55[config] interface ATMOut1/0 ATM1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
[config] interface FILEIn1/1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
[config] interface RTPIn1/0 ATM1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
[config] interface TCPIn1/3 ATM1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
[config] interface UDPIn1/0 ATM1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
[config] interface UDP Backhaul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
[config] interface smd1/6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
[config] interface sme1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
[config] interface RTPOut1/2 ASIIn1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 59[config] interface UDPOut1/1 ASIIn1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
[config] interface XrtrIn1/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
[config] interface XrtrOut3/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
[config] ipRoutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
[config] alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
[config] blade-alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
[config] licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
[config] media-routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
[config] custom-program-services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63[config] custom-element-services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
[config] program-details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
[config] element-details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Chapter 3: Configuration Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Configuration Scenarios Using CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Single Program Route from ASI In to UDP Out using CLI . . . . . . . . . . . . 68
Custom Program Route from ASI In to UDP Out Using CLI . . . . . . . . . . 71
Configuration Questions and Answers . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Topic 1: UDPOut Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Topic 2: iPlex IP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
7/27/2019 iPlex Version 5.0 CLI Reference
8/80
iPlex Command Line Interface Reference Guide
8
7/27/2019 iPlex Version 5.0 CLI Reference
9/80
9
Introducing TANDBERG
Television iPlex
Chapter 1
7/27/2019 iPlex Version 5.0 CLI Reference
10/80
10
iPlex Command L ine Interface Reference Guide
Introduction to the Command Line InterfaceGuide
Use this guide to help you understand features and tasks that can be performedwith iPlex using the command line interface.
Topics discussed in this guide include:
How to contact technical support.
CLI basics.
CLI conventions.
CLI connection methods.
Command definitions.
Show commands.
Config commands.
Other iPlex Guides
In addition to this guide, you can also refer to the following guides:
Installation & Hardware Specifications Guide, for information on
Hardware specifications.
Hardware installation and configuration.
Software installation and configuration.
Network Management & Monitoring Reference Guide, for information on
SNMP formats, messages, and conceptual row creation
MIBs
HP Openview information
Web Interface User Guide, for information on
Hardware specifications.
Basic concepts.
Configuration scenarios.
Web interface features and functions.
Port configuration and statistics.
Redundancy.
7/27/2019 iPlex Version 5.0 CLI Reference
11/80
iPlex Command L ine Interface Reference Guide
11
Contacting TANDBERG TelevisionCustomer Support
For information on TANDBERG Television support hours and how to contactTANDBERG Television support, please refer to the literature that came with yoursupport contract. To contact TANDBERG Television about the purchase a sup-
port contract, please refer to the contact information below.
Basic support is available to TANDBERG Television customers either by e-mail
or on the Web (refer to contact information, below). Please send a detailed mes-sage and you will be contacted during regular business hours (see the Support
Check List).
Contact Information
Support Check List
When contacting Customer Support, please provide the following infor-
mation:
Your name, company name, e-mail address, and phone number.
TANDBERG Television product name and version number.
A complete network diagram with IP addresses.
The name and version of the network software.
If set-top boxes are involved, please brand and software version.
Syslog entries for the period over which the problem occurred.
iPlex Tech Support Dump.
A full description of the problem
Did this problem occur just after making a network change?
Did this problem occur just after adding or removing hardware or software?
E-mail: [email protected]
Web: http://www.tandbergtv.com/contactingsupport.ink
7/27/2019 iPlex Version 5.0 CLI Reference
12/80
12
iPlex Command L ine Interface Reference Guide
7/27/2019 iPlex Version 5.0 CLI Reference
13/80
13
CLI Commands and
Operation
Chapter 2
7/27/2019 iPlex Version 5.0 CLI Reference
14/80
14
iPlex Command L ine Interface Reference Guide
Command Line Interface
CLI Basics
This chapter covers the basic operation and commands of the Command Line
Interface (CLI).After reading this chapter, you will be able use the CLI to config-ure and manage the iPlex. However, this chapter only gives the basic commands as
examples of syntax; for information on parameters, you need to reference Chapter
3: Using the Web GUI.
You can access the TANDBERG Television iPlexs command line interface
through a telnet, SSH, or console (serial port) connection. Accessing the commandline interface is referred to as a CLI session.
When you establish a CLI session, commands within the iPlexs CLI are in a treestructure. To configure the iPlex, you need to understand how to navigate the CLI
tree structure. The following section walks you through navigating within the CLItree. With the help of the question mark (?) and Show functions, you will learn
how to determine where you are in the tree, and what functions and subcom-mands are available.
Depending on the position within the tree structure, you will have access to differ-ent command options. Once in a given configuration branch, you may enter thesystem level configuration commands that apply to that particular level. In addi-
tion, the command prompt changes to reflect the position within the tree structureto assists with navigation. This allows for easy reference within the tree structure
when in configuration mode.
To start Telnet from Windo ws:
1 Click the Windows Start button.
2 ClickRun.
3 In the Open box, type: t el net xxx. xxx. xxx. xxx(the IP address of the iPlex Management Port you are connecting to)
4 ClickOK.
5 At the login prompt enter the user name, at the next prompt enter thepassword.
iPlex will respond Welcome to TANDBERG Television iPlex. It will alsoinclude the software version and date. The next prompt will display[root@iplex]or . To list the available commands, at the prompt type a
question mark (?) and press Enter.
Typing ? at the prompt displays the following top-level commands: show, reset,
config, copy, delete, upload, clear, reboot, set, shell, syncfs, and upgrade.
Typing exit at a prompt returns you to next higher level in the command tree.
SSH (SecureSHell) A protocol
that runs over TCP to
cryptographically secure login
sessions.
TIP It is recommended that only
users familiar with the CLI format
use the Command Line Interface.
7/27/2019 iPlex Version 5.0 CLI Reference
15/80
iPlex Command L ine Interface Reference Guide
15
Additional Connection Method
In case of failure of the management network, it may be desirable to connect a
modem to the iPlex console port on the SCM blade to dial into the console port ofa remote iPlex. For example, one could use a iPlex to provide video-over-IP ser-vices to a small community installed on an unmanned local head end connected to
the Network Operations Center (NOC) through a T1 line for management. If theT1 line fails, the NOC will lose connectivity to the iPlex and could use the modem
to reach its control console.As part of its boot process, the iPlex sends modem configuration commands to setup an external modem connected to its control console port. These configuration
commands will work with most common external modems that support the ATcommand set. It is also possible to connect a modem after booting the iPlex. How-
ever, in this case you must pre-configure the modem prior to connection, as fol-lows:
Baud rate 9600
No command echo
No online echo
No result codes (quiet mode)
Fixed DTE speed Disable transmit and receive flow control
Ignore RTS and DTR
Auto-answer in the fir st ring
The sequence of commands sent by the iPlex to the modem on boot time is as fol-lows:
ATZ
AT E0 F1 M1 Q1 X0
AT &B1 &H0 &I0 &R1
AT &C1 &D0 &S0
AT S0=1
NOTE
The root user has full access to all commands. The user groups
administrator and operator have limited access. If access isdenied after entering a command, make sure the login was for root
user and try again.
AT command set A series of
machine instructions used to
activate features on an intelligent
modem. Developed by Hayes
Microcomputer Products and
officially known as the Hayes
Standard AT Command Set, it is
used entirely or partially by most
every modem manufacturer. AT
is a mnemonic code for
ATtention, which is the prefix that
initiates each command to the
modem.
7/27/2019 iPlex Version 5.0 CLI Reference
16/80
16
iPlex Command L ine Interface Reference Guide
Interface Naming Convention
There are two port types in iPlex: physical and logical. The discovery of physical
ports occurs as part of initial submodule discovery; the user creates logical ports.
The naming convention for physical ports (submodules) is as follows: Port-TypeSlotNumber/UnitNumber. The logical ports naming convention is: Port-TypeSlotNumber/NumberUsed.
UnitNumber and NumberUsed
In physical ports, the unit number starts with 0. Each submodule slot on an MCMcontains two unit numbers with a range from 0 to 15. In logical ports, the user
assigns the number and has no range.
MCM Example You may, for instance, have one ASI input, an Encoder, an ATM, and ASIoutput. Since each ASI submodule has two ports, you have two available inter-
faces; however, encoders and ATM submodules have only one interface persubmodule. The following names for this blade would be as follows: ASIIn1/0and ASIIn1/1, ENC1/2, ATM1/4, ASIOut1/6 and ASIOut1/7. The ASI
input port creates a SMD (TANDBERG Television MPE Decapsulation) inter-face. The SMD interface associated with ASIIn1/0 will be smd1/0 and the
ASIIn1/1 will be smd1/1. The ASI output creates a SME (TANDBERG Tele-vision MPE Encapsulation) interface. The SME interface attached to
ASIOut1/6 will be sme1/6 and the ASIOut1/7 will be sme1/7.
If you are looking directly at the rear view of an iPlex, the port assignment startingfrom lowest port number to highest goes as illustrated below:
While the cards locations (slots) for both rows are numbered from left to right 1,
2, 3, and 4, the port numbers in the top row run from 7 and 6 on the left down to1 and 0 on the right. Then in the bottom row, they go from 15 and 14 on the left
down to 9 and 8 on the right.
Addit ional ly, the user can create UDP logical output port with unit number 0,and receive the name UDPOut1/0. Logical ports include: UDPIn/Out,
RTPIn/Out, FileIn, and TCPIn.
SCM Example Each iPlex has two Gigabit Ethernet interfaces: GE1 and GE2.
1
7,6
2
5,4
3
3,2
4
1,0
115,14
213,12
311,10
49,8
7/27/2019 iPlex Version 5.0 CLI Reference
17/80
iPlex Command L ine Interface Reference Guide
17
CLI Tree
The diagram below is a visual representation of the CLI command levels. For the
two main commands show and config. For detailed information, see Show
Commandson page 25 and Config Commandson page 40.
Backing Up the Configuration File
After you change your system and are confident everything is working correctly,
TANDBERG Television recommends that you copy the configuration file at thatpoint to the startup file in order to have a known starting point should the system
ever have to reboot. See copyon page 21 for the procedure on how to do this.
NOTE
Before making any changes to your system, TANDBERG Television rec-
ommends that you save the current state of your system by copying the
currently running configuration file to a backup file (you choose the name
of the file) in order to be able to go back to the current configuration
should you ever need to do so. Seecopy on page 21 for the procedure onhow to do this.
7/27/2019 iPlex Version 5.0 CLI Reference
18/80
18
iPlex Command L ine Interface Reference Guide
Command DefinitionsThe following section defines all the commands provided by the CLI.
? (root)
Command Type: ?
Description Shows all top-level root nodes
Example show Show commands t o di spl ay i nf or mat i onr eset r eset commandsconf i g Ent er t he conf i g modecopy Copy conf i gur ati on f i l esdel et e Del et e commandupl oad Upl oad commandcl ear Cl ear commandr eboot r eboot bl ade or chassi sset Set commandsshel l Start a shel l processsyncf s Synchr oni ze f i l e syst ems on SCMsupgr ade Set syst em i n upgr ade mode
Command Description Page
? Shows all top-level root nodes page 18
show Show commands to display information page 19
reset reset commands page 19
config Enter the config mode page 20
copy Copy configuration files page 21
delete Delete command page 21
upload Upload command page 22
clear Clear command page 22
reboot reboot blade or chassis page 23
set Set commands page 23
shell Start a shell process page 24
syncfs Synchronize file systems on SCMs page 24
upgrade Set system in upgrade mode page 24
7/27/2019 iPlex Version 5.0 CLI Reference
19/80
iPlex Command L ine Interface Reference Guide
19
show
Command Type: show ?
Description Shows all shownodes
Example r unni ng- conf i g Di spl ay t he cur rent conf i gurat i onchassi s Show chassi s i nfor mati onbl ade Show bl ade i nf or mat i oni prout e Show al l Network r out es- - I P, MPE and ATMi nt erf ace Show i nt er f ace i nf ormat i onmedi a- r out es Show medi a- r out e i nf ormati onst ats Show st ats i nfor mati onpr ogr am Show pr ogr am i nf or mat i onst ream Show st ream i nf or mat i onel ement Show el ement i nf ormat i on f or a progr amvl an Show vl an i nf ormati on
l og Show l ogt ech-support Show t echni cal suppor t i nfor mati onser i al Show ser i al out put l ognt pst at us Show NTP st at us
reset
Command Type: reset ?
Description Shows reset commands
Example st at s Reset st ats i nf or mat i on
Command 2 Type: reset stats ?
Example [root@iPlex] reset stats ?gei 1 Reset GE por t st ati st i csgei 2 Reset GE por t st ati st i csbl ade1 Reset bl ade st ati st i csASI I n1/ 2 Reset stati sti cs f or ASI I n1/ 2ASI I n1/ 3 Reset stati sti cs f or ASI I n1/ 3ASI I n1/ 4 Reset stati sti cs f or ASI I n1/ 4ASI I n1/ 5 Reset stati sti cs f or ASI I n1/ 5ASI I n1/ 10 Reset stati sti cs f or ASI I n1/ 10
ASI I n1/ 11 Reset stati sti cs f or ASI I n1/ 11ASI I n1/ 12 Reset stati sti cs f or ASI I n1/ 12ASI I n1/ 13 Reset stati sti cs f or ASI I n1/ 13ENC1/ 0 Reset st ati st i cs f or ENC1/ 0ATMI n1/ 0 Reset st ati st i cs f or ATMI n1/ 0ATMI n1/ 1 Reset st ati st i cs f or ATMI n1/ 1UDPOut1/ 0 Reset st at i st i cs f or UDPOut1/ 0UDPOut1/ 1 Reset st at i st i cs f or UDPOut1/ 1
7/27/2019 iPlex Version 5.0 CLI Reference
20/80
20
iPlex Command L ine Interface Reference Guide
ATMOut1/ 0 Reset st at i st i cs f or ATMOut1/ 0ATMOut1/ 1 Reset st at i st i cs f or ATMOut1/ 1
Command 3 Type: r eset s t at s ENC1/ 4
Example Counter s f or ENC1/ 4 are r eset
config
Command Type: conf i g
Description Changes prompt to config-mode
Command 2 At config#Type: ?
Description Shows all [config#] subcommands
Example system - Conf i gur e systemwi de conf i gur at i onr edundancy - Conf i gur e r edundancy par amet erssnmp- ser ver - Conf i gure SNMP agenti nt erf ace - Conf i gure i nterf acesi pRout es - Conf i gur e I P Rout eal arms - Conf i gur e r edundancy al ar ms
bl ade- al ar ms - Conf i gur e bl ade al ar msl i censes - Conf i gur e Li censesl oggi ng - Conf i gur e Loggi ngbl ade- al ar ms - Conf i gur e Bl ade Al ar mssecur i t y - Conf i gur e Secur i t yncompass - Conf i gur e nCompasscas - Conf i gur e CASmedi a- r out es - Conf i gur e medi a r out escust om- program- servi ces - Cr eat e cust om programscust om- el ement - servi ces - Cr eat e cust om el ement sprogram- det ai l s - Conf i gur e par ameter s f or cust om programsel ement - det ai l s - Conf i gur e par ameters f or cust omel ement s
To conf i gure sys t em paramet er s ent er syst em conf i gurat i on mode byent er i ng
system{
To conf i gure snmp- ser ver par amet er s ent er snmp- ser ver conf i gurat i onmode by enter i ng
snmp- ser ver {
To conf i gure r edundancy paramet er s ent er r edundancy conf i gurat i on modeby ent eri ng
r edundancy {
NOTE
Type exit to get out of config mode.
7/27/2019 iPlex Version 5.0 CLI Reference
21/80
iPlex Command L ine Interface Reference Guide
21
copy
Command Type: copy ?
Description Shows copy commands
Example copy r unni ng- conf i g st art up- conf i g [ save_defaul t _val ues]orcopy r unni ng- conf i g asci i - f i l ename [ save_defaul t _val ues]orcopy start up- conf i g runni ng- conf i g
Command 2 Type: copy r unni ng- conf i g [ save_def aul t _val ues]
Description Creates an ascii file of current running configuration as the specified name.save_def aul t s is an optional argument with a value of true (default) or false.
Command 3 Type: copy r unni ng- conf i g start up- conf i g[ save_def aul t _val ues]
Description Copies the current running configuration to the startup configuration.save_def aul t s is an optional argument with a value of true or false (default).
Command 4 Type: copy st ar t up- conf i g runni ng- conf i g
Description Applies the startup configuration manually (i.e., not at boot time).
delete
Command Type: del et e ?
Description Shows delete commands
Example port Del ete speci f i c portpr ogr am Remove pr ogr am f rom speci f i c i nt er f aceel ement Remove el ement f r om speci f i c i nt er f ace
st r eam Remove st r eam f r om speci f i c i nt er f ace
Command 2 Type: del et e por t ?
Description Shows existing ports
7/27/2019 iPlex Version 5.0 CLI Reference
22/80
22
iPlex Command L ine Interface Reference Guide
Example UDPOut1/ 2 Del et e i nter f ace UDPOut1/ 2UDPOut1/ 0 Del et e i nter f ace UDPOut1/ 0UDPOut1/ 1 Del et e i nter f ace UDPOut1/ 1
Command 3 Type: del ete por t UDPOut 1/ 2
upload
Command Type: upl oad ?
Description Shows upload commands
Example l og Upl oad l og f i l e
Command 2 Type: upl oad l og
Description Uploads the specified file.
clear
Command Type: cl ear ?
Description Shows clear commands
Example l og Cl ear l og f i l eal l Cl ear f ul l Conf i gur at i onndc Remove f r om nDC
Command 2 Type: cl ear l og
Description Clears the specified file.
Command 3 Type: cl ear al l
Description Clears full configuration.
Command 4 Type: cl ear ndc
Description Removes from nDC.
NOTE
Follow the same procedure and syntax for program, element, and
stream.
7/27/2019 iPlex Version 5.0 CLI Reference
23/80
iPlex Command L ine Interface Reference Guide
23
reboot
Command Type: r eboot ?
Description Shows reboot commands
Example bl ade Reboot speci f i c bl adechassi s Reboot Chassi s
Command 2 Type: r eboot bl ade
Description Reboots the specified blade.
set
Command Type: set ?
Description Shows set commands
Example dat e Set syst em dat e and t i me ( For mat MMDDhhmmCCYY)conf i g Set conf i gurat i on f roma f i l ebl ade-pr i mary Set speci f i c bl ade as pri maryndc Add t o nDC
Command 2 Type: set bl ade- pr i mary ?
Description Shows the primary blades
Command 3 Type: set bl ade- pr i mar y
Description Sets specified blade as primary.
Command 4 Type: set conf i g
Description Sets specified configuration file.
Command 5 Type: set ndc
Description Adds to nDC.
7/27/2019 iPlex Version 5.0 CLI Reference
24/80
24
iPlex Command L ine Interface Reference Guide
shell
Command Type: shel l
Description This command allows access to an interactive shell. It is intended for TAND-BERG Television Support personnel. Do not use this command unless directed by
TANDBERG Television Support. If you enter the shell, you can return to the CLIby typing "exit".
syncfs
Command Type: syncf s
Description Synchronizes files, for use with redundant SCMs.
Example syncf s
upgrade
Command Type: upgrade
Description Sets system in upgrade mode
7/27/2019 iPlex Version 5.0 CLI Reference
25/80
iPlex Command L ine Interface Reference Guide
25
Show Commands
show
Command Type: show ?
Description Shows all shownodes
Example r unni ng- conf i g Di spl ay t he curr ent conf i gurat i onchassi s Show chassi s i nf ormati onbl ade Show bl ade i nf or mat i oni prout e Show I P r out es- - I P, MPE and ATMi nt erf ace Show i nt er f ace i nf ormat i onmedi a- r out es Show medi a- r out e i nf ormati onst ats Show st ats i nfor mati on
pr ogr am Show pr ogr am i nf or mat i onst r eam Show st r eam i nf or mat i onel ement Show el ement i nf ormat i on f or a progr amvl an Show vl an i nf ormati onl og Show l ogt ech-support Show t echni cal suppor t i nfor mati onser i al Show ser i al out put l ognt pst at us Show NTP st at us
show running-config
Command Type: show r unni ng- conf i g
Description Shows current iPlex configuration.
Example system{ (NOTE: THIS EXAMPLE IS TRUNCATED FOR BREVITY)host Name " iPlex"dnsDomai nName "TANDBERGTV. COM"chassi sI pAddr ess 192. 168. 21. 102vl anSet up {
vl anI d 2i pAddr ess 172. 30. 1. 1subnet Mask 255. 255. 255. 0
NOTEThe following message will appear: This command may take long
time to complete, are you sure [Y/N]?
NOTE
The example below is a shortened sample configuration, extensively
edited for practical length in this document. The particular nodes
shown will be a function of the iPlex chassis configuration.
7/27/2019 iPlex Version 5.0 CLI Reference
26/80
26
iPlex Command L ine Interface Reference Guide
ge1 ' Unt agged'ge2 ' No'
}aut omati cMul t i castSet up {
vl anName ' vl an_2'
ge1 tr uege2 f al se
i pAddress 224. 1. 1. 1}aut omati cMul t i castSet up {
vl anName ' vl an_2'ge1 tr uege2 f al se
i pAddress 224. 1. 1. 2}aut omati cMul t i castSet up {
vl anName ' vl an_2'ge1 tr uege2 f al se
i pAddr ess 224. 2. 127. 254}aut omati cMul t i castSet up {
vl anName ' vl an_2'ge1 tr uege2 f al sei pAddr ess 224. 10. 10. 30
}aut omati cMul t i castSet up {
vl anName ' vl an_2'ge1 tr uege2 f al sei pAddr ess 224. 12. 12. 45
}enabl eRi p fal sesessi onTi meout 240t i meZone ' GMT- 8'
}snmp- ser ver {
snmpCommuni t ySt r i ngs {snmpReadCommuni t y " publ i c"snmpReadWr i t eCommuni t y "pr i vat e"
}
snmpLocat i on "Lab "snmpCont act "LabAdmi n"snmpTrapCommuni t y "pr i vat e"di spl ayBackupPort s f al sedi spl ayBackupI nt er f aces f al se
}r edundancy {
r edundancyMode ' Aut omat i c'}i pRout es {}l i censes {}user Loggi ng {
enabl eUserLoggi ng t r ue
7/27/2019 iPlex Version 5.0 CLI Reference
27/80
iPlex Command L ine Interface Reference Guide
27
user Loggi ngI nter f ace {enabl eWeb t r ueenabl eCl i t r ueenabl eSnmp t r ue
}
user Loggi ngOper at i on {enabl eAdd t r ueenabl eModi f y t r ueenabl eRemove t r ueenabl eI nf o t r ue
}
}i nt er f ace ASI I n1/ 6 {
channel Act i ve ' I nput A'descr i pt i on "ASI I n DVB"i nput St r eamType ' DVB'enabl eCatPar si ng t r ueenabl eNi t Par si ng t r ue
enabl eSdt Par si ng tr ueenabl eTabl eForwardi ng t r ue}i nt er f ace ASI I n1/ 7 {
channel Act i ve ' I nput A'descri pt i on ""i nput St r eamType ' MPEG'enabl eCatPar si ng f al seenabl eTabl eForwardi ng t r ue
}i nter f ace ASI Out 1/ 0 {
aut oSel ectPi dRange {mi ni mumPi dVal ue 256maxi mumPi dVal ue 8185
}
autoSel ect Pmt Range {mi ni mumPi dVal ue 48maxi mumPi dVal ue 8185
}
autoSel ect ProgramRange {mi ni mumPr ogr amI d 1maxi mumPr ogr amI d 65535
}
descri pt i on ""out put St r eamType ' MPEG't r anspor t Str eamI d 1enabl eCatGenerat i on f al seout put Bi t Rate 30000000
asi Out put Packet Si ze ' 188'}i nt er f ace TCPI n1/ 1 gei 1/ 0 Sect i on {
descri pt i on "Sect i on Por t "i nput St r eamType ' MPEG'enabl eCatPar si ng f al seenabl eTabl eForwardi ng t r uesecti onPor t Pi dVal ue 0x100
7/27/2019 iPlex Version 5.0 CLI Reference
28/80
28
iPlex Command L ine Interface Reference Guide
sect i onPacki ng t r uepor t Number 2048t cpFl owCont r ol t r uet cpBi t Rat e 160000000
}
show chassis
Command Type: show chass i s
Description Shows chassis run-time operational statistics.
Example
[ r oot @i Pl ex] show chassi sChassi s Ser i al Number: 0x00301D023E8DSl ot 1 MCM onl i ne OS 2. 8(17) Versi on: ~?+~?+?DOM present yes Booted f r om DOM no
Tr ay #1 pr esentTr ay #2 pr esent8 PMC si t esPMC sl ot #1 Encoder #channel s 1, channel 1 PROCESSI NGPMC sl ot #2 Encoder #channel s 1, channel 1 PROCESSI NGPMC sl ot #3 Encoder #channel s 1, channel 1 PROCESSI NGPMC sl ot #4 Encoder #channel s 1, channel 1 PROCESSI NGPMC sl ot #5 empt yPMC sl ot #6 empt y
PMC sl ot #7 empt yPMC sl ot #8 empt y
CPU: 0 Curr ent CPU Ut i l i zati on 1%Star t ed on: Thu J ul 28 15: 49: 50 2005Tot al memor y 977099(kb)Fr ee memor y 146026(kb)Al l ocat ed memor y 831073( kb)ASI Buf f er Manager
Number of Buf f er Ref 640000 Number of Buf f er s 320000Avai l abl e Buf f ers 639992No Buf f er Ref Count 0 No Buf f er s Count 0Buf f er Hi ghwat er mark 8
UDP Buf f er ManagerNumber of Buf f er Ref 16000 Number of Buf f er s 8000Avai l abl e Buf f ers 16000No Buf f er Ref Count 0 No Buf f er s Count 0Buf f er Hi ghwat er mark 0
Sect i on Buf f er ManagerNumber of Buf f er Ref 64000 Number of Buf f er s 32000Avai l abl e Buf f ers 64000No Buf f er Ref Count 0 No Buf f er s Count 0Buf f er Hi ghwat er mark 0
4K_Pool Buf f er ManagerNumber of Buf f er Ref 672000 Number of Buf f er s 64000
NOTE
This is an shortened sample configuration. The particular nodes shown
will be a function of the iPlex chassis configuration.
7/27/2019 iPlex Version 5.0 CLI Reference
29/80
iPlex Command L ine Interface Reference Guide
29
Avai l abl e Buf f ers 672000No Buf f er Ref Count 0 No Buf f ers Count 0Buf f er Hi ghwat er mark 0
Sl ot 10 SCM onl i ne OS 2. 8(17) Vers i on: ~?+- n?Revi si on I D
Board: ?L~?+~?++?? gCPLD: ?L ~?+~?++??g
Temperat ure Sensor sXeon: 0. 0 CE7501 MCH: 0. 0 CE7501 I CH: 0. 0 CPCI Hub: 0. 0 CGE Mac: 0. 0 CGE Swi t ch: 0. 0 CPPC 8250: 0. 0 CSerdes: 0. 0 CUpper Car r i er Bot t om: 0. 0 CUpper Carr i er Top: 0. 0 CLower Car r i er Bot t om: 0. 0 CLower Carr i er Top: 0. 0 C
Vol t age Sensor s3. 3 V Stby: 0. 00 V3. 3 V Mai n: 0. 00 V5 V: 0. 00 VVCCP: 0. 00 V12 V: 0. 00 V- 12 V: 0. 00 VVBAT: 0. 00 V2. 0 V: 0. 00 V1. 3 V CPU 12: 0. 00 V2. 5 V: 0. 00 V1. 8 V Stby: 0. 00 V1. 8 V Mai n: 0. 00 V1. 8 V Rambus: 0. 00 V1. 5 V: 0. 00 V1. 25 V DDR: 0. 00 V1. 2 V: 0. 00 V2. 5 V GE: 0. 00 V
Fan SensorsFan 1 St at us: OKFan 2 St at us: OKFan 3 St at us: OKFan 4 St at us: OKFan 5 St at us: OKFan 6 St at us: OKFan 7 St at us: OKFan 8 St at us: OKFan 1 Speed: 7200 r pmFan 2 Speed: 7200 r pmFan 3 Speed: 7200 r pmFan 4 Speed: 7200 r pm
Fan 5 Speed: 7200 r pmFan 6 Speed: 7200 r pmFan 7 Speed: 7200 r pmFan 8 Speed: 7200 r pm
[ r oot @i Pl ex]
7/27/2019 iPlex Version 5.0 CLI Reference
30/80
30
iPlex Command L ine Interface Reference Guide
show iproute
Command Type: show i pr out e
Description Shows routes present in the chassis.
ExampleROUTI NG TABLEMPE Rout esDest i nat i on Mask Gateway I nter f ace PI D MAC Addr ess Di sci pl i neManual172. 16. 5. 0 255. 255. 255. 240 172. 16. 5. 1 sme1/ 0 0x1FFF 00: 00: 00: 00: 00: 00172. 16. 5. 16 255. 255. 255. 240 172. 16. 5. 17 sme1/ 1 0x1FFF 00: 00: 00: 00: 00: 00172. 16. 17. 32 255. 255. 255. 240 172. 16. 17. 33 sme1/ 2 0x1FFF 00: 00: 00: 00: 00: 00172. 16. 17. 48 255. 255. 255. 240 172. 16. 17. 49 sme1/ 3 0x1FFF 00: 00: 00: 00: 00: 00I P Rout es
Dest i nat i on Mask Gateway I nter f ace Manual172. 30. 1. 0 255. 255. 255. 0 172. 30. 1. 1 vl an_2192. 168. 19. 0 255. 255. 255. 0 192. 168. 19. 182 eth210. 2. 3. 0 255. 255. 255. 0 10. 2. 3. 1 vl an_3127. 0. 0. 0 255. 0. 0. 0 127. 0. 0. 1 l o0. 0. 0. 0 0. 0. 0. 0 192. 168. 19. 1 eth2172. 16. 5. 96 255. 255. 255. 240 172. 16. 5. 97 smd1/ 1172. 16. 5. 112 255. 255. 255. 240 172. 16. 5. 113 smd1/ 2172. 16. 17. 64 255. 255. 255. 240 172. 16. 17. 65 smd1/ 4172. 16. 17. 80 255. 255. 255. 240 172. 16. 17. 81 smd1/ 5172. 16. 17. 96 255. 255. 255. 240 172. 16. 17. 97 smd1/ 6172. 16. 17. 112 255. 255. 255. 240 172. 16. 17. 113 smd1/ 7
show interface
Command Type: show i nt erf ace ?
Description Shows interfaces present in the chassis.
Example TCPI n1/ 0 Di spl ay i nt er f ace i nf or mat i on f or TCPI n1/ 0TCPI n1/ 1 Di spl ay i nt er f ace i nf or mat i on f or TCPI n1/ 1UDPOut1/ 0 Di spl ay i nter f ace i nf ormati on f or UDPOut1/ 0UDPOut1/ 2 Di spl ay i nter f ace i nf ormati on f or UDPOut1/ 2UDPOut1/ 1 Di spl ay i nter f ace i nf ormati on f or UDPOut1/ 1RTPOut1/ 0 Di spl ay i nterf ace i nfor mati on f or RTPOut1/ 0UDPI n1/ 0 Di spl ay i nt erf ace i nf ormati on f or UDPI n1/0UDPI n1/ 1 Di spl ay i nt erf ace i nf ormati on f or UDPI n1/1
UDPI n1/ 2 Di spl ay i nt erf ace i nf ormati on f or UDPI n1/2UDPI n1/ 4 Di spl ay i nt erf ace i nf ormati on f or UDPI n1/4UDPI n1/ 5 Di spl ay i nt erf ace i nf ormati on f or UDPI n1/5
7/27/2019 iPlex Version 5.0 CLI Reference
31/80
iPlex Command L ine Interface Reference Guide
31
- - More- - ( 35% of 3950 byt es)
show interface TCPIn1/0
Command Type: show i nt er f ace TCPI n1/ 0
Description Shows configuration of specified interface
Example I nf ormati on of i nt erf ace TCPI n1/ 0:Por t Type: TCP I nputPor t St at e: Processi ngPor t Packeti zer: MPEG- 2 TransportUnappl i ed Conf i g: no- - Descr i pt i on - -
Descr i pt i on:
show media-routes
Command Type: show medi a- r out es ?
Description Shows a list of media-routes
Example[ r oot @i Pl ex] show medi a- r out es ?
al lUDPI n1/ 0 Show medi a- r out es f r om t o [ r oot @i Pl ex]
NOTE
This is an shortened sample configuration. The particular nodes shown
will be a function of the iPlex chassis configuration.
NOTE
This is just an example of the show interface command. Follow the
same syntax for all interfaces.
NOTE
CLI is case sensitive; therefore, upper and lower case characters
must be entered correctly.
7/27/2019 iPlex Version 5.0 CLI Reference
32/80
32
iPlex Command L ine Interface Reference Guide
show media-routes all all
Command Type: show medi a- r out es al l al l
Description Shows a list of media-routes
Example[ r oot @i Pl ex] show medi a- r out es al l al l
Type I nput Out put Source Dest Source DestI nt er f ace I nt er f ace Pgm Pgm PI D PI D
PROGRAM ( publ i c) ASI I n1/ 2 ATMOut1/ 0 160 160 N/ A N/ APROGRAM ( publ i c) ASI I n1/ 2 ATMOut1/ 1 202 202 N/ A N/ APROGRAM ( publ i c) ATMI n1/ 0 UDPOut 1/ 0 1 1 N/ A N/ APROGRAM ( publ i c) ATMI n1/ 1 UDPOut 1/ 1 1 1 N/ A N/ A[ r oot @i Pl ex]
Example show stats
Command Type: show st at s ?
Description Shows a list of interfaces statistics available to view
Example [ r oot @i Pl ex] show st ats ?gei 1 Show GE port st ati st i csgei 2 Show GE port st ati st i csbl ade1 Show bl ade st ati st i csmul t i cast Show Mul t i cast conf i gi gmp Show i gmp conf i g
backpl ane Show backpl ane conf i gcache- l i st Show Egress, I ngress and Fi l t er l i stASI I n1/ 2 Show stat i st i cs f or ASI I n1/ 2ASI I n1/ 3 Show stat i st i cs f or ASI I n1/ 3ASI I n1/ 4 Show stat i st i cs f or ASI I n1/ 4ASI I n1/ 5 Show stat i st i cs f or ASI I n1/ 5ASI I n1/ 10 Show st ati sti cs f or ASI I n1/ 10ASI I n1/ 11 Show st ati sti cs f or ASI I n1/ 11ASI I n1/ 12 Show st ati sti cs f or ASI I n1/ 12ASI I n1/ 13 Show st ati sti cs f or ASI I n1/ 13ENC1/ 0 Show st ati st i cs f or ENC1/ 0ATM1/ 6 Show st ati st i cs f or ATM1/ 6ATM1/ 8 Show st ati st i cs f or ATM1/ 8smd1/ 2 Show st ati st i cs f or smd1/ 2smd1/ 3 Show st ati st i cs f or smd1/ 3
smd1/ 4 Show st ati st i cs f or smd1/ 4smd1/ 5 Show st ati st i cs f or smd1/ 5smd1/ 10 Show st ati st i cs f or smd1/ 10smd1/ 11 Show st ati st i cs f or smd1/ 11smd1/ 12 Show st ati st i cs f or smd1/ 12smd1/ 13 Show st ati st i cs f or smd1/ 13ATMI n1/ 0 Show st ati st i cs f or ATMI n1/ 0ATMI n1/ 1 Show st ati st i cs f or ATMI n1/ 1
7/27/2019 iPlex Version 5.0 CLI Reference
33/80
iPlex Command L ine Interface Reference Guide
33
UDPOut1/ 0 Show st ati st i cs f or UDPOut1/ 0UDPOut1/ 1 Show st ati st i cs f or UDPOut1/ 1ATMOut1/ 0 Show st at i st i cs f or ATMOut1/ 0ATMOut1/ 1 Show st at i st i cs f or ATMOut1/ 1UDPI n1/ 0 Show st ati st i cs f or UDPI n1/0
[ r oot @i Pl ex]
show stats gei1
Command Type: show st ats gei 1
Description Shows GE statistics for a particular port.
Example [ r oot @i Pl ex] show st ats gei 1GE f i ber port 1 Li nk UP Sync OK
Type: CopperVendor : FI NI SAR CORP.Part Number : FCMJ - 8521- 3
Revi si on: 4Bytes Tx 32359811904Bad Bytes Tx 0Uni cast Packets Tx 0Mul t i cast Packets Tx 24077241Br oadcast Packets Tx 0Col l i si on Packet s Tx 0Bytes Rx 210312Bad Bytes Rx 0Uni cast Packets Rx 0Mul t i cast Packets Rx 4572Br oadcast Packets Rx 0CRC & Al i gn Err ors 0[ r oot @i Pl ex]
show stats blade1
Command Type: show st ats bl ade1
Description Shows statistics for a particular blade.
NOTE
CLI is case sensitive; therefore, upper and lower case characters
must be entered correctly.
NOTE
You can also show stats for gei2.
7/27/2019 iPlex Version 5.0 CLI Reference
34/80
34
iPlex Command L ine Interface Reference Guide
Example Stat i st i cs for bl ade bl ade1Bytes Tx 96538556318Bad Byt es Tx 0Uni cast Packets Tx 20050Mul t i cast Packets Tx 70877141Br oadcast Packet s Tx 2580Col l i si on Packet s Tx 0Bytes Rx 38741330256Bad Bytes Rx 0Uni cast Packets Rx 36533Mul t i cast Packet s Rx 28440634Br oadcast Packet s Rx 11CRC & Al i gn Err ors 0
show stats ASIOut1/2
Command Type: show st at s ASI Out1/ 2
Description Shows ASI Out statistics for a particular port.
Example Str eam stat i st i cs f or port ASI Out 1/ 2PI D # packet s # dupl i cat es # err or s bi t rat e ( b/ s)0x0 24572 0 1 150660x1 29459 0 1 182370x20 2457 0 0 15850x1FFF 0 0 0 9074581
Tot al : 30. 50 Mb/ s
show stats ENC1/0
Command Type: show st at s ENC1/ 0
Description Shows encoder statistics
Example Str eam stat i st i cs f or port ENC1/ 0PI D # packet s # dupl i cat es # err or s bi t rat e ( b/ s)0 33625 0 0 2144160 33625 0 0 21441101 76217 0 0 492368191 2441930 0 0 1561269
Tot al : 2. 22 Mb/ s
show program
Command Type: show progr am ?
Description Shows programs
7/27/2019 iPlex Version 5.0 CLI Reference
35/80
iPlex Command L ine Interface Reference Guide
35
Example This is an abbreviated sample of the Show Program ? command.[ r oot @i Pl ex] Show Program ?UDPI n1/ 0 Di spl ay programi nf ormat i on f o r UDPI n1/ 0UDPI n1/ 1 Di spl ay programi nf ormat i on f o r UDPI n1/ 1
UDPI n1/ 2 Di spl ay programi nf ormat i on f o r UDPI n1/ 2TCPI n1/ 0 Di spl ay pr ogram i nf or mat i on f or TCPI n1/ 0RTPI n1/ 0 Di spl ay pr ogr am i nf or mat i on f or RTPI n1/ 0ENC1/ 4 Di spl ay pr ogr am i nf or mat i on f or ENC1/ 4UDPOut1/0 Di spl ay programi nf ormat i on f or UDPOut1/0Backhaul 1/ 0 Di spl ay programi nf ormat i on for Backhaul 1/ 0[ r oot @i Pl ex]
show program ASIIn1/4
Command Type: show pr ogr amASI I n1/ 4
Description Shows ASI In programs
ExampleTot al 10 pr ograms on i nt er f ace ASI I n1/ 4Progr amPMT PCR Ser vi ce Ser vi ce Ser vi ce Or i gi nalNumber PI D PI D Name Pr ovi der Type Net wor k I d150 0xFBC 0xFBC Eur onews DI GI TAL TELEVI SON 1
151 0xFBC 0xFBC Eur onews ( addi t i onal audi o) DI GI TAL TELEVI SON152 0xFBB 0xFBB Al Manar DI GI TAL TELEVI SON 1153 0xFB5 0xFB5 SSC DI GI TAL TELEVI SON 1154 0x99C 0x99C SBC TV DI GI TAL TELEVI SON 1155 0x938 0x938 J or dan TV DI GI TAL TELEVI SON 1156 0x67C 0x67C Ger man TV DI GI TAL TELEVI SON 1157 0x852 0x852 Ger man TV Radi o DI GI TAL RADI O 1158 0x8D4 0x8D4 TV Pol oni a DI GI TAL TELEVI SON 1159 0x8D4 0x8D4 Pol ski e Radi o 3 DI GI TAL RADI O 1
show program ENC1/0
Command Type: show progr am ENC1/ 0
Description Shows encoder programs
ExampleTot al 1 programs on i nt er f ace ENC1/ 0
NOTE
CLI is case sensitive; therefore, upper and lower case characters
must be entered correctly.
7/27/2019 iPlex Version 5.0 CLI Reference
36/80
36
iPlex Command L ine Interface Reference Guide
Progr amPMT PCR Ser vi ce Ser vi ce Ser vi ce Or i gi nalNumber PI D PI D Name Pr ovi der Type Net wor k I d1 0x65 0x65 USER DEFI NED 0
show stream
Command Type: show st r eam ?
Description Shows what streams are running
Example This is an abbreviated example of the Show Stream ? command.[ r oot @i Pl ex] Show Str eam ?UDPI n1/ 0 Di spl ay st r eam i nf or mat i on f or UDPI n1/ 0UDPI n1/ 1 Di spl ay st r eam i nf or mat i on f or UDPI n1/ 1UDPI n1/ 2 Di spl ay st r eam i nf or mat i on f or UDPI n1/ 2
TCPI n1/ 0 Di spl ay st r eam i nf or mat i on f or TCPI n10
RTPI n1/ 0 Di spl ay st r eam i nf or mat i on f or RTPI n1/ 0ENC1/ 4 Di spl ay st r eam i nf or mat i on f or ENC1/ 4UDPOut1/0 Di spl ay st r eam i nf ormat i on f or UDPOut1/0Backhaul 1/ 0 Di spl ay str eam i nf ormati on f or Backhaul 1/ 0[ r oot @i Pl ex]
show stream ASIIn1/2
Command Type: show st r eam ASI I n1/ 2
Description Shows configuration of a specified ASI In stream.
Example Tot al 29 st r eams on i nt er f ace ASI I n1/ 2Pi d St r eam Program( hex) Type Number0x0 PAT 00x1 CAT 00x10 NI T 00x11 SDT 00x21 PMT 00x1001 Audi o 222
show element
Command Type: show el ement ?
Description Shows what elements are running
7/27/2019 iPlex Version 5.0 CLI Reference
37/80
iPlex Command L ine Interface Reference Guide
37
ExampleASI I n1/ 2 Di spl ay el ement i nfor mati on f or a pr ogr amon ASI I n1/ 2ASI I n1/ 3 Di spl ay el ement i nfor mati on f or a pr ogr amon ASI I n1/ 3ASI I n1/ 4 Di spl ay el ement i nfor mati on f or a pr ogr amon ASI I n1/ 4
ASI I n1/ 5 Di spl ay el ement i nfor mati on f or a pr ogr amon ASI I n1/ 5
show element ASIIn1/5
Command Type: show el ement ASI I n1/ 5
Description Shows configuration of specified elements
Example show el ement
Command 2 Type: show el ement ASI I n1/ 5 17
ExampleI nf ormati on f or progr am#17 on i nt erf ace ASI I n1/ 5:Pi d PCR St r eam Cur / El ement Ver Tag
Pi d Type Next Fl ags #0x12C no MPEG2 Vi deo yes 0 1 00x12D no MPEG1 Audi o yes 0 1 0
show vlan
Command Type: show vl an
Description Shows all defined vlans
Example VLAN I D I P Addr ess Subnet Mask GE1 GE22 172. 30. 1. 1 255. 255. 255. 0 U -3 10. 2. 3. 1 255. 255. 255. 0 T -
show log
Command Type: show l og ?
Description Shows log usage
Example This is an abbreviated example of the Show Log command.[ r oot @i Pl ex] Show l og ?
7/27/2019 iPlex Version 5.0 CLI Reference
38/80
38
iPlex Command L ine Interface Reference Guide
Usage:show l og Exampl e:
show l og 1 warni ng
Wi l l di spl al y al l war ni ng messages fr om bl ade 1show l og 1 er r or
Wi l l di spl ay al l er r or messages f r om bl ade 1show l og 1 al l
Wi l l di spl ay al l messages f r om bl ade 1show l og al l al l
Wi l l di spl ay al l messages f r om al l bl adesshow l og al l user
Wi l l di spl ay al l user l og messages[ r oot @i Pl ex]
Command 2 Type: show l og al l al l
Example
[ r oot @i Pl ex] Show l og al l al l ?War ni ng Mess ages
J an 06 21: 06: 14bl ade1 ENCODER DEVI CE- 4- RETSTART: ENC1/ 2: Encoder i s r est ar t i ngJ an 06 20: 10: 42 bl ade1 Tabl e Par ser 4- RESET: ASI I n1/ 3: I nput t abl e i nf or mat i on i s bei ng r esetJ an 07 06: 08: 20 bl ade1 BLADE_MGR- 4- LOSS_OF_FEED: Loss of f eed on por t ASI I n1/ 4
Cr i t i cal Messages
J an 06 19: 15: 22 bl ade1 CFG_WDOG- 2- ASI _SYNC: Loss of ASI i nput f or ASI I n1/ 4
J an 06 18: 58: 10bl ade1 CFG_WDOG- 2- ASI _SYNC: Loss of ASI i nput f or ASI I n1/ 4
Err or Messages
J an 03 08: 38: 17 bl ade1 ASI _OUT_DEV- 3- STOP_STREAM: ASI Out 1/ 1: St op st r eam command sent f or ,st r eam i d 0x00001105
J an 03 08: 33: 44 bl ade1 ASI _OUT_DEV- 3- STOP_STREAM: ASI Out 1/ 1: St op st r eam command sent f or ,st r eam i d 0x00001105
I nf o Messages
J an 08 01: 40: 44 bl ade1 DEMUX- 6- PI D_DI SAPPEAR: ASI I n1/ 4: PI D 0x0827 Di sappear , t i me outJ an 08 01: 40: 44 bl ade1 DEMUX- 6- PI D_DI SAPPEAR: ASI I n1/ 4: PI D 0x0800 Di sappear , t i me outJ an 07 09: 28: 04 bl ade1 DEMUX- 6- PI D_DI SAPPEAR: ASI I n1/ 4: PI D 0x0811 Di sappear , t i me out
Command 3 Type: show l og 3 i nf o
Example This is a screenshot ofshow l og 3 i nf o[ r oot @i Pl ex] Show l og 3 i nfo
J an 08 02: 42: 24 bl ade1 DEMUX- 6- PI D_DI SAPPEAR: ASI I n1/ 4: PI D 0x0827 Di sappear , t i me outJ an 08 01: 10: 11 bl ade1 DEMUX- 6- PI D_DI SAPPEAR: ASI I n1/ 4: PI D 0x0800 Di sappear , t i me out[ r oot @i Pl ex]
NOTE
This is an abbreviated example of just a portion of what you may see,
depending upon your configuration.
7/27/2019 iPlex Version 5.0 CLI Reference
39/80
iPlex Command L ine Interface Reference Guide
39
show tech-support
Command Type: show t ech- suppor t
Description Shows entire configuration
Example Thi s command may t ake l ong t i me t o compl et e, ar e you sur e [ Y/N] ?
show serial
Command Type: show ser i al
Description Shows usage
Example Usage:show ser i al MCM sl ot - num/ cpu- numExampl e:show ser i al MCM 1/ 0Wi l l di spl ay t he MCM l og f r om bl ade1 cpu 0
Command 2 Type: show seri al MCM 1/ 0
Description Shows blade log of cpu 0
show ntpstatus
Command Type: show ntpst at us
Description Shows status of NTP
Exampler emot e r efi d st t when pol l r each del ay off set j i t t er======================================================================================*192. 168. 1. 18 132. 239. 1. 6 3 u 32 64 377 2. 207 - 3. 922 0. 001
172. 17. 255. 255 0. 0. 0. 0 16 u - 64 0 0. 000 0. 000 16000. 0
7/27/2019 iPlex Version 5.0 CLI Reference
40/80
40
iPlex Command L ine Interface Reference Guide
Config Commands
Navigation in config-mode
The CLI has a special configuration mode that allows you to configure individualsubsystems. By typing config at the prompt, you will enter configuration mode.
The prompt will then change to: [config#]
To review what functions are available, enter a question mark (?). The following
functions will display: system, redundancy, snmp-server, interface, ipRoutes,licenses, media-routes, custom-program-services, custom-element-services, pro-gram-details, and element-details. At the [config#] prompt, enter the next node
you wish to access; for example, enter interface followed by a question mark toget a list of interfaces. Then enter interface and the
exactly as it appears in the list, (interface ASIIn1/4) followed by an opening brace({), and at the prompt enter a question mark (?). This will display the parameters
available to configure for that interface, the example below has already selectedDVB as the input stream type therefore the two DVB tables are listed in theparameters available to configure.
[ conf i g#] i nt er f ace ASI I n1/ 4 {[ ASI I n1/ 4 conf i g#] ?channel Act i ve I dent i f i er of act i ve pl ug on par t i cul ar a physi cal i nputdescri pt i on Extended Descri pt i on of t he Obj ecti nputSt r eamType I nput t r anspor t st r eam f ormatenabl eCatPar si ng Enabl e t he par si ng of MPEG- CAT t abl eenabl eNi t Par si ng Enabl e t he parsi ng of DVB- NI T t abl esenabl eSdtParsi ng Enabl e t he par si ng of DVB- SDT t abl es
Deleting by using no
The product of certain commands and parameters can be deleted after configura-
tion is completed by appending no to the command or parameter and running itagain.
This applies to several different parameters and commands where there is a keyvalue or values to differentiate the item to be deleted.
[ conf i g#] no i nt er f ace ASI I n1/ 4 Wi l l del et e i nt er f ace ASI I n1/ 4
[ system conf i g#] no vl anSetup {[ syst emconf i g#] vl an I d 3[ syst em c onf i g#] } These t hr ee st eps wi l l del et e VLAN I D 3
Configuration ValuesEach configuration option has a command followed by a value. Following theabove example, to select the input stream type for ASI In, at the prompt [ASIIn1/4 config#] you must enter the value in single quotes inputStreamType DVB to
set the stream type value to DVB.
7/27/2019 iPlex Version 5.0 CLI Reference
41/80
iPlex Command L ine Interface Reference Guide
41
After configuration you must end with a closing brace (}) to apply the configura-
tion. To cancel the configuration type exit before entering a close brace(}).
Key Values
Some configuration parameters must be entered in sequence for the values to be
applied. When configuring an MPE route there are three key values that must beset the other values are optional.
[ i pRout es manual MpeRout e conf i g#] ?net work MPE r out e base I P address Key val uenet mask MPE r out e net mask Key val uegat eway MPE r out e gat eway Key val uepi d MPE r out e PI Di pMappi ngMacAddress I P mappi ng MAC addressmacAddress MPE r oute dest i nat i on MAC addr essdi sci pl i ne MPE r out e di sci pl i ne name
config
Command Type: conf i g
Description Changes prompt to config-mode
Command 2 At config#Type: ?
Description Shows all [config#] subcommands
Example syst em - Conf i gure systemwi de conf i gur ati onr edundancy - Conf i gur e r edundancy par amet erssnmp- ser ver - Conf i gure SNMP agenti nterf ace - Conf i gure i nterf acesi pRout es - Conf i gure I P Rout el i censes - Conf i gure Li censesmedi a- r out es - Conf i gur e medi a r out es
NOTE
Enumerated values must be entered using single quotes. Integer values do
not require single quotes. Check syntax for entering parameter values bytyping the name of the parameter and a question mark (?). For example:
[ASIIn1/4 config#] channelActive ? This will provide the choices and
method for entering parameters.
NOTE
To return to the root prompt from [config#], type exit.
7/27/2019 iPlex Version 5.0 CLI Reference
42/80
42
iPlex Command L ine Interface Reference Guide
cust om- program- servi ces - Create cust om programscust om- el ement - servi ces - Cr eat e cust om el ement sprogram- det ai l s - Conf i gur e par ameter s f or cust om programsel ement - det ai l s - Conf i gur e par ameters f or cust omel ement s
To conf i gure sys t em paramet er s ent er syst em conf i gurat i on mode byent er i ngsystem{
To conf i gure snmp- ser ver par amet er s ent er snmp- ser ver conf i gurat i onmode by enter i ngsnmp- ser ver {
[config] system
Command In [config#] Type: system{
Description Changes prompt to [system config #]
Command 2 At [system config#]Type: ?
Description Shows all [system config#] subcommands
Example hostName SCMhost namednsDomai nName DNS domai n namemanagementI p Management I P address
chassi sI pAddress I P address of the chassi s
defaul tRouter Defaul t router
boot Boot choi ce (TFTP, Fl ash)tf tpHost Host conf i gurati on for TFTP boot
vl anSetup Set up a newVLAN
multi castSetup Set up a Mul ti cast group, and add port to the groupautomati cMul ti castSetupMul ti cast created wi th a UDP_Out port . Can change only GE confi g
enabl eRi p Enabl e RI P routi ng protocol
dnsServer DNS server addresssysl ogHost Sysl og server address
sessi onTimeout User i nterf ace sessi on ti meout i nterval
backplaneSubnet A /26 I P subnet used for chassi s backti meZone Time zone setti ng for the chassi s
ntpServers NTP Servers
NOTE
Type attribute and a question mark (?) for information on the
attributes parameters. Then type the attribute and parameters sep-
arated by a space.
7/27/2019 iPlex Version 5.0 CLI Reference
43/80
iPlex Command L ine Interface Reference Guide
43
Values
hostName: Type SCM host name, string (max length 255) values must be enteredwithin double quotes. Type
dnsDomainName: Type the DNS domain name, string (max length 255) values must
be entered within double quotes.Type
managementIp: This parameter has multiple attributes to configure. TypemanagementIp { at the prompt enter parameters:
ipAddress: IP address for the management port.Type netmask: Netmask for the management port.
Type
chassisIpAddress: Type the chassis IP address.
Type .
defaultRouter: Type the IP address of the default router.Type .
boot: Type one of the following boot choices (TFTP, Flash) Possible values are: TFTP,
Flash1, Flash2, and DHCP. Enumerated values must be entered within single quotes.
Type tftpHost: This parameter has multiple attributes to configure. Type tftpHost { at the
prompt enter parameters:tftpHost: IP address for the TFTP Host. Type tftpFileName: File name to boot from, string (max length 255) values must beentered within double quotes. Type
vlanSetup: This parameter has multiple attributes to configure. TypevlanSetup { atthe prompt enter parameters:
vlanId: VLAN ID for the new VLAN, integer (min 2 max 4093).Type ipAddress:VLAN IP Address. Type subnetMask: VLAN Netmask. Type
ge1: GE1 port enable for this VLAN. Possible values are: No, Untagged, Tagged.
NOTE
Values are examples only.
NOTE
You must type a close brace } to return to system configuration.
7/27/2019 iPlex Version 5.0 CLI Reference
44/80
44
iPlex Command L ine Interface Reference Guide
Enumerated values must be entered within single quotes.Type
ge2: (see ge1).
multicastSetup: This parameter has multiple attributes to configure. TypemulticastSetup { at the prompt enter parameters:
vlanName:VLAN name for multicast. Type ge1: GE1 port enable for this VLAN. Boolean (true or false). Type ge2: (see ge1).ipAddress: IP address between 224.0.0.0 and 239.255.255.255.
Type
automaticMulticastSetup: This parameter has multiple attributes to configure. TypeautomaticMulticastSetup { at the prompt enter parameters:
vlanName: VLAN name for multicast. Type ge1: GE1 port enable for this VLAN. Boolean (true or false). Type ge2: (see ge1).ipAddress: IP address between 224.0.0.0 and 239.255.255.255.Type
enableRip: Type true or false to enable or disable RIP. Type onceenabled you can type a ? to view additional RIP parameters.
ripVersion: Type Version 1 or Version 2. Type ripSetup: Type ripSetup { to configure RIP setup there are three parameters:-interfaceName:Type (key value) must be entered.-enableRip: Type Boolean (true or false)-passiveMode: Type Boolean (true or false)
dnsServer: Type dnsServer { at the prompt enter parameters:dnsServer: IP address for the DNS Server. Type
syslogHost: Type syslogHost { at the prompt enter parameters:syslogHost: IP address for the Syslog Host. Type
sessionTimeout: Type integer for timeout 1 to 65535 (seconds).
Type .
backplaneSubnet:Type the backplane subnet. A /26 IP subnet is used for chassisback. Type
timeZone: Type the time zone setting for the chassis, possible values are: Abidjan,Accra, Acre, ACT, Adak, Addis_Ababa, Adelaide, Aden, Alaska, Aleutian, Algiers,Almaty, Amman, Amsterdam, Anadyr, Anchorage, Auckland, Belfast, Belgrade,
Berlin, Brisbane, Cairo, Calcutta, CET, CST6CDT, EET, EST, EST5EDT, GMT,GMT0, GMT-0, GMT+0, GMT-1, GMT+1, GMT-10, GMT+10, GMT-11,
GMT+11, GMT-12, GMT+12, GMT-13, GMT-14, GMT-2, GMT+2, GMT-3,
NOTE
It is possible to have multiple tagged VLANs on the same port (GE1,GE2), however, only one untagged.
NOTE
It is possible to have multiple tagged VLANs on the same port (GE1,
GE2), however, only one untagged.
7/27/2019 iPlex Version 5.0 CLI Reference
45/80
iPlex Command L ine Interface Reference Guide
45
GMT+3, GMT-4, GMT+4, GMT-5, GMT+5, GMT-6, GMT+6, GMT-7, GMT+7,GMT-8, GMT+8, GMT-9, GMT+9, Greenwich, Japan, Los_Angeles, Melbourne,Moscow, Mountain, MST, MST7MDT, Pacific, Pacific-New, PST8PDT, New_York,
Taipei, Zurich. Enumerated values must be entered within single quotes. Type
ntpServers:Type ntpServers { at the prompt enter parameters:
ntpServers: IP address for the NTP Servers. Type
[config] userLogging
Command In [config#] Type: user Loggi ng {
Description Changes prompt to [userLogging config#]?
Command 2 In [userLogging config#] Type: enabl eUser Loggi ng
Description Enables user logging.
Command 3 In [userLogging config#] Type: user Loggi ngI nt er f ace CLI t r ue
Description Changes prompt to user Loggi ng user Loggi ngI nter f ace conf i g#.TheCLI interface is enabled for logging.
Command 4 In [userLogging userLoggingInterface config#] Type: userLoggi ngOp-erati on
Description Changes prompt to user Loggi ng user Loggi ngOper ati on conf i g#, andenables the setting of which operations are logged.
Example[ r oot @i Pl ex] conf i g[ conf i g#] user Loggi ng {[ user Loggi ng conf i g#] enabl eUserLoggi ng t r ue[ user Loggi ng conf i g#] userLoggi ngI nt erf ace {[ userLoggi ng userLoggi ngI nt erf ace conf i g#] enabl eWeb t r ue[ userLoggi ng userLoggi ngI nt erf ace conf i g#] enabl eCl i t rue[ userLoggi ng userLoggi ngI nt erf ace conf i g#] enabl eSnmp f al se[ userLoggi ng userLoggi ngI nt erf ace conf i g#] enabl eSnmp f al se[ userLoggi ng userLoggi ngI nt erf ace conf i g#] enabl eLCD f al se
[ userLoggi ng userLoggi ngI nt erf ace conf i g#] }[ user Loggi ng conf i g#] user Loggi ngOper at i on {[ user Loggi ng user Loggi ngOper ati on conf i g#] enabl eAdd t r ue[ user Loggi ng user Loggi ngOper ati on conf i g#] enabl eModi f y t r ue[ user Loggi ng user Loggi ngOper ati on conf i g#] enabl eRemove t r ue[ user Loggi ng user Loggi ngOper ati on conf i g#] enabl eI nf o t r ue[ user Loggi ng user Loggi ngOper ati on conf i g#] }[ user Loggi ng conf i g#] }
7/27/2019 iPlex Version 5.0 CLI Reference
46/80
46
iPlex Command L ine Interface Reference Guide
[ conf i g#] exi t[ r oot @i Pl ex]
[config] redundancy
Command In [config#] Type: r edundancy {
Description Changes prompt to [redundancy config#]?
Example r edundancySet up Redundancy Conf i gur at i on
Command 2 In [config#] Type: r edundancySetup {
Description Changes prompt to [redundancySetup config#]?
Example backupRedundancyI pAddress I P Addr ess
enabl eRedundancy Redundancy Enabl ed
Values
backupRedundancyIpAddress: Enumeraed parameter
enableRedundancy: Boolean (true or false)
Command 3 In [redundancySetup config#] Type: backupRedundancyI pAddress
Description Specifies the backup redundant IP address.
Command 4 In [redundancySetup config#] Type: enabl eRedundancy t r ue
Description Enables chassis redundancy.
NOTE
Blue indicates user input. There is no CLI command to display logs.
Internal iPlex storage for logs is very limited. It is recommended thatan external syslog server is used to preserve persistence of the log.
NOTE
Both backupRedundancyIpAddress and enableRedundancy have to
be set to establish the redundancy. You cannot modify backupRe-
dundancyIpAddress once the redundancy is established. Instead,
you must break out of redundancy first before you can change the
backup redundancy IP address.
7/27/2019 iPlex Version 5.0 CLI Reference
47/80
iPlex Command L ine Interface Reference Guide
47
[config] snmp-server
Command In [config#] Type: snmp- ser ver {
Description Changes prompt to [snmp-server config#]?
Example snmpCommuni t ySt r i ngs Read And Read Wr i t e Communi t y f or SNMPsnmpLocat i on Locat i on f or SNMPsnmpContact Contact f or SNMPsnmpTr apCommuni t y SNMP Communi t y s t r i ng f or SNMP t r apst r apDesti nat i on SNMP Trap desti nat i onsnmpV3User SNMPv3 User conf i gurat i on
t r apSever i t y SNMP Tr ap Sever i t y
Values
snmpCommunityStrings: Type snmpCommunityStrings { This parameter has
multiple attributes.snmpReadCommunity: Type SNMP read community string within double
quotes (maximum. length 255 characters).snmpReadWriteCommunity: Type SNMP read/write community str ing within
double quotes (maximum. length 255 characters).
snmpLoction: Type SNMP location string within double quotes (maximum. length
255 characters).
snmpContact: Type SNMP contact string within double quotes (maximum. length255 characters).
snmpTrapCommunity Type SNMP trap community string within double quotes
(maximum. length 255 characters).
trapDestination:Type trapDestination {IpAddress: Type IP address for traps to be sent .
snmpV3User: This parameter has multiple key value attributes to configure. TypesnmpV3User { at the prompt enter parameters, then type } to set values:
userName: Create SNMPv3 user name, enter a string value (max. length 16)within double quotes. Type password: Create SNMPv3 password, enter a string value (max. length 16) withindouble quotes. Type
authProtocol: Enter an authentication protocol for SNMPv3, possible values areMD5 or SHA and must be entered within single quotes. Type
NOTE
Type attribute and a question mark (?) for information on the
attributes parameters. Then type the attribute and parameters sep-arated by a space. For example, at the prompt [snmp-server con-
f ig#] type: snmpCommunityStr ings { enter, and at the next prompt
[snmp-server snmpCommunityStrings config#] type snmpRead-
Community publ ic.
7/27/2019 iPlex Version 5.0 CLI Reference
48/80
48
iPlex Command L ine Interface Reference Guide
securityLevel: Enter security type for SNMPv3, possible values are noauth orauth and must be entered within single quotes. Type
[config] securityCommand In [config#] Type: securi t y {
Description Changes prompt to [security config#]
Example Under security, the following commands are available:net workAccessLi st Network Access Li st
net workCont rol I nt er f aces Sel ecti vel y di sabl e net work cont rol
i nt erf aces
enabl eGePor t sCont ro l Enabl e GE por t s cont r ol
To issue a network access list command, type:net workAccessLi st {
The prompt will change to [security networkAccessList config#]. Enter thenetwork and netmask as follows:
[ secur i t y conf i g#] net wor kAccessLi st {[ secur i t y networkAccessLi st conf i g#] network 192. 168. 4. 0[ secur i t y net workAccessLi st conf i g#] netmask 255. 255. 255. 0[ secur i t y net wor kAccessLi st conf i g#] }[ secur i t y conf i g#]
To enable/disable individual control interfaces, type:
net wor kCont r ol I nt er f aces {
The prompt will change to [security networkControlInterfaces config#]At this point, you have the following choices:
[ secur i t y net wor kCont r ol I nt er f aces conf i g#] ?
enabl eTel net Enabl e t el net
enabl eSsh Enabl e SSH
enabl eHt t p Enabl e HTTP
enabl eHt t ps Enabl e HTTPS
enabl eSnmp Enabl e SNMP
Complete the command by typing::
}
[config] interface
Command In [config#] Type: i nt er f ace ?
Description Shows available interfaces
7/27/2019 iPlex Version 5.0 CLI Reference
49/80
7/27/2019 iPlex Version 5.0 CLI Reference
50/80
50
iPlex Command L ine Interface Reference Guide
To create or configure a TCP In port using the IP Tunneling packetizer, use inter-face InterfaceName AttachedInterface Packetizer {
Example:At the prompt [config#] type interface TCPIn1/0 gei1/0 IPTun-
neling {
Values include: tcpFlowControl (boolean enable or disable), tcpBitRate (min 0,max 160000000), PID (min 0x0, max 0x1FFE), ipMappingMacAddress (bool-ean enable or disable), macAddress (MAC address for encapsulation
[xx:xx:xx:xx:xx:xx], sectionPacking (boolean enable or disable).
To configure or create Fi leIn device
To configure or create FILEIn device use interface InterfaceName Packetizer {
Example: At the prompt [config#] type interface FILEIn1/0 Transport {
Valid keywords for packetizer are Transport, Section and DataPipe
To conf igur e or create RTPIn device
To configure or create RTPIn device use interface InterfaceName AttachedInter-
face {
Example: At the prompt [config#] type interface RTPIn1/0 gei1/0RTCPEnable { or interface RTPIn1/0 ATM1/2 RTCPEnable {
To co nfig ure or create ATMIn/ATMOut devic eTo configure or create ATMIn or ATMOut device use interface InterfaceName
AttachedInterface {
Example: At the prompt [config#] type interface ATMIn3/0 ATM3/2 { orinterface ATMOut1/2 ATM1/1 {
[config] interface ASIIn1/5
Command In [config#] Type: i nt er f ace ASI I n1/ 5 {
Description Changes prompt to [ASIIn1/5 config#]?
Examplechannel Act i ve I dent i f i er of act i ve pl ug on par t i cul ar a physi cal i nputdescri pt i on Ext ended Descri pti on of t he Obj ecti nputSt r eamType I nput t r anspor t st r eam f ormatenabl eCatPar si ng Enabl e t he par si ng of MPEG- CAT t abl e
NOTE
For more information on IP Tunneling configuration, see the Web
Interface User Guide.
NOTE
For RTP, RTCPEnable or RTCPDisable must be added when
creating a new port.
7/27/2019 iPlex Version 5.0 CLI Reference
51/80
iPlex Command L ine Interface Reference Guide
51
enabl eNi t Par si ng Enabl e t he parsi ng of DVB- NI T t abl esenabl eSdtParsi ng Enabl e t he par si ng of DVB- SDT t abl es
[config] interface ASIOut1/6
Command In [config#] Type: i nt er f ace ASI Out 1/ 6 {
Description Changes prompt to [ASIOut1/6 config#]?
Exampleaut oSel ectPi dRange Range of PI D val ues t o use when aut o-f i xi ng PI D conf l i ct saut oSel ect Pmt Range Range of PMT val ues t o use when aut o- f i xi ng PMT conf l i ct saut oSel ectProgramRange Range of Program Number s t o use when aut o- f i xi ng conf l i ct spmtProgramDescr i ptor Programdescr i ptor f or P MT outer l ooppmtEl ementDescr i ptor El ement descr i ptor f or PMT i nner l oopni t Net wor kDescr i pt or Net wor k descr i pt or f or NI T out er l oopni tTranspor t Descr i ptor Transpor t descr i ptor f or NI T i nner l oopsdt Descr i pt or Descr i pt or f or SDTdescri pt i on Extended Descri pt i on of t he Obj ectout put Str eamType Output t r anspor t st r eam f ormatt r anspor t St r eamI d Uni que i dent i f i er of t he out put t r anspor t st r eam ( 0- 0xff f f )r epet i t i onRat e Repet i t i on Rat eenabl eDescri pt or Conf i gur at i on Enabl e/ Di sabl e t he descri pt or r out i ng conf i gur at i on pageenabl eSdtGenerat i on Enabl e SDT gener at i on on t he speci f i ed out putenabl eTdtGenerat i on Enabl e TDT gener at i on on t he speci f i ed out putenabl eTotGenerat i on Enabl e TOT gener at i on on t he speci f i ed out putact ual - other Tabl eCorr ect i on Enabl e Actual / Ot her SI Tabl e Corr ect i onenabl eNi t Generat i on Enabl e NI T gener at i on on t he speci f i ed out putenabl eCatGenerat i on Enabl e CAT gener at i on on t he speci f i ed out putnet wor kI d Uni que i dent i f i er of t he out put net wor k ( 0- 0xff f f )out put Bi t Rat e Output bi t r ate ( Max 160Mbps shared bet ween bot h por t s)
asi Out putPacket Si ze Si ze of packets ( 188 or 204-byte) f or ASI Out put
Method of findi ng attribu tes and value rangesFor information on an attributes parameters, type the attribute followed by a ques-
tion mark (?). If the result indicates that another level exists, type the next levelattribute followed by an opening brace ({). For example, at the prompt [ASIOut1/
6 config#] type: autoSelectPidRange {. The prompt will change to[ASIOut1/6 autoSelectPidRange config#].Then type a question mark (?).This will display the next level of attributes. If typing the attribute followed by a
question mark provides a list of values, then type the attribute and parameters sep-arated by a space. By using this method, you can find all attributes and their range
of values and so configure the interface. For example, at the prompt[ASIOut1/6 autoSelectPidRange config#] type: minimumPidValue 1000.
Remember to exit from the current level type a closing brace (}).
7/27/2019 iPlex Version 5.0 CLI Reference
52/80
52
iPlex Command L ine Interface Reference Guide
[config] interface ENC1/4
Command In [config#] Type: i nt er f ace ENC1/ 4 {
Description Changes prompt to [ENC1/4 config#]?
RTME Exampledescri pt i on Ext ended Descri pti on of t he Obj ectencoderSt art ed Start / St op vi deo encodi ng
vi deoResol ut i on Speci f i es t he vi deo r esol ut i on t o use f or encodi ngencodi ngMethod Speci f i es whether t o encode i n constant or var i abl e bi t r atesvbr Bi t Rat eencoderI nput Sel ect Encoder i nput sel ecti on ( S- Vi deo/ Composi t e)vi deoFor mat Speci f i es t he vi deo f ormat ( NTSC/ PAL)audi oDataRate Speci f i es t he dat a r ate of t he encoded audi oaudi oOut put Mode Speci f i es t he audi o out put t ype ( mono, st ereo, dual , j oi nt)audi oSampl eRate Speci f i es t he audi o sampl i ng r ateenabl eServi ceI nfor mati on Enabl e/ Di sabl e t he opt i on t o ent er servi ce i nfor mati onser vi ceNameanal ogAudi oGai nspat i al Fi l terTypespati al Fi l t erAut oMode Sel ect t o use spat i al f i l t er i n aut o modet emporal Fi l t erAut oMode Sel ect t o use t emporal f i l t er i n aut o modemedi anFi l t erType Medi an Fi l t er Type
l umi nanceHi ghThr eshol d Sel ect M. F. Lumi nance Hi gh Thr eshol dl umi nanceLowThr eshol d Sel ect M. F. Lumi nance Low Thr eshol dchromi nanceHi ghThr eshol d Sel ect M. F. Chromi nance Hi gh Thr eshol dchromi nanceLowThr eshol d Sel ect M. F. Chromi nance Low Thr eshol dscal er AndPref i l t er Set t i ngsgopSi ze Sel ect t he GOP Si ze t o opt i mi ze t he qual i t yanal ogVi deoPr ePr ocessi ngi nput Vi deoQual i t y I nput Vi deo Qual i t yuseDef aul t s Use Def aul t suseEmbeddedAudi o Use Embedded Audi oembeddedAudi oChannelencoderSer vi ceI nf ormati onenabl eVi deoAgc Enabl e aut omat i c gai n cont r ol f or composi t e or S-Vi deo i nputsencoderAudi oPi d PI D f or t he encoded audi o bi t st r eamencoder Audi oType Audi o t ype i ndi cat ed i n t he PMTcl osedCapt i oni ng Cl osed Capt i oni ng f ormat ( ATSC, Custom, or none)
NOTE
The parameters shown in the example below are for the Real-Time
MPEG Enco der(RTME) and most of these parameters are common
to both types of encoders, see the next section for the Real-Time
MPEG Encod er Plus (RTME Plus) exclusive parameters.
7/27/2019 iPlex Version 5.0 CLI Reference
53/80
iPlex Command L ine Interface Reference Guide
53
[config] interface ENC1/0
Command In [config#] Type: i nt er f ace ENC1/ 0 {
Description Changes prompt to [ENC1/0 config#]?
RTME Plus
Exampledescri pt i on Ext ended Descri pti on of t he Obj ectencoderStar t ed Start / Stop vi deo encodi ngvi deoResol ut i on Speci f i es t he vi deo r esol ut i on t o use f or encodi ngencodi ngMethod Speci f i es whet her t o encode i n const ant or var i abl e bi t r atesvbr Bi t RateencoderI nputSel ect Encoder i nput sel ecti on ( S-Vi deo/ Composi t e)vi deoFor mat Speci f i es t he vi deo f ormat ( NTSC/ PAL)enabl eServi ceI nfor mati on Enabl e/ Di sabl e t he opt i on t o ent er servi ce i nfor mati onser vi ceNameanal ogAudi oGai nspati al Fi l t erAut oMode Sel ect t o use spat i al f i l t er i n aut o modet empor al Fi l t erAut oMode Sel ect t o use t empor al
Top Related