Inspired By Chal lenge
Met al seat ed valves
2
Floating Ball Valves
Metal seated valves
Introduction
Metal seated ball valve
Habonim’s tough line of metal seated valves excels in the harshest industrial environments, where valve failures can damage plant
e�ciency, reduce pro�tability and endanger safety. Habonim’s meticulously engineered metal seated valve can withstand the
harshest applications and process conditions, including extreme high temperature, high pressure and abrasive medium. Careful
metallurgical selection of all valve parts, the development of special surface, including and hard coatings, and thorough analyses
of mechanical strength and thermal expansion ensure that the Habonim MTM line is the best choice for industry’s toughest
applications.
The lower temperature range from -60°C (-76°F) to �00°C (75�°F) undergoes Habonim’s unique surface treatment, LTPN (Low
Temperature Plasma carbo-Nitriding). LTPN is a cost e�ective hardening system for austenitic stainless steel, which provides a
minimum thickness of �0 microns and more than triple (>6�HRC) the natural hardness of the base material.
For the higher temperature range from �00°C (75�°F) and up to 5��°C (�000°F) Habonim o�ers various HVOF spray solutions
based on chromium and tungsten carbides.
For the even higher temperature range from 5��°C (�000°F) and up to 650°C (��00°F) Habonim uses ASME B�6.�� listed forged
bar material for the construction of the valve pressure-containing elements.
For the severe abrasive conditions of the pulp and paper industry, Habonim o�ers also a minimum of �.5 mm thick, hard stellite
coating. Each coating is speci�cally engineered to the customer’s application in order to provide outstanding resistance to
abrasion and corrosion for a lifetime of e�ective operation in harsh applications.
Each ball and seat sub-assembly is accurately machined, ground and then mate-lapped for a perfect match. The complete valve
assembly demonstrates high repeatability in terms of sealing (Rate B - factory tested), low torque and smooth operation at various
temperatures and pressures.
Habonim uses ASME B�6.�� listed cast material for the valve body and ends.
Standards of compliance
Factory certi�cation ISO 900�-�00� Quality management system
ANSI B�6.��, API 6D / ISO �����, ISO �7�9� Valve design
ANSI B�.�0.� NPT - National Pipe Taper thread
ISO 7-�, JIS B0�0� BSPT - British Standard Pipe Taper thread
DIN ��5� BSPP
ANSI B�6.��, EN ��760 Socket weld end connection
ANSI B�6.�5, EN��6�7-� Buttweld end connection (Schedule 5, �0, �0, �0)
ANSI B�6.5, EN �09� Pt �&� Flange dimensions
ANSI B�6.�0, EN 55� Face-to-Face dimensions
NACE MR-0�75, ISO �5�56-�/�/� Materials for use in H�S-containing environments in oil
and gas production
EN ���66-�, API 59�, ANSI FCI 70-� Testing of metallic valves - Pressure tests, test
procedures and acceptance criteria.
Certi�cations API 607, ISO �0�97 Testing of valves - Fire type-testing requirements
PED 97/��/EC Module H Pressure equipment directive
ATEX 9�/9/EC equipment and protective systems intended for use in
potentially explosive atmospheres
(optional for actuated unit only)
IEC 6�50�-� SIL �/� Safety integrity level - Functional safety of electrical/
electronic/programmable electronic safety-related
systems (optional for actuated unit only)
Documentation EN �0�0� �.� / �.� / �.� Metallic materials - types of inspection documents
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
5�� °C / �000 °FUp to
650 °C / ��00 °FOrdering
code system
3Metal seated valves
Metal seated valves
General
Valves design
Basic design
Temperature range -60 °C to +�00 °C (-76 °F to +75� °F)
Surface treatment LTPN
Materials Stainless steel A�5� CF�M/CF�M, A�79 ��6/��6L, Carbon steel A��6 WCB, A�05, A�50 LF�
T design
Temperature range -60 °C to +5�� °C (-76 °F to +�000 °F)
Coating HVOF Cr�C� (Chromium Carbide), HVOF WC-Co (Tungsten Carbide) and Stellite
Materials Stainless steel A�5� CF�M/CF�M, A�79 ��6/��6L, carbon steel A��6 WCB, A�05, A�50 LF�
T design
Temperature range -60 °C to +650 °C (-76 °F to +��00 °F)
Coating HVOF Cr�C� (Chromium Carbide)
Materials Stainless steel A�79 ���/���H, A��� F��
Operation Lever or gear operated, pneumatic or electric actuated
Series in range
Z47 / Z47T series Standard and full port
Size range �/�”- �" (DN� - DN50)
Pressure range ANSI Class 600 | Vacuum �0-6 Tor to �0� bar (��90 psi)
Size range ��/�”- �" (DN65 - DN�00)
Pressure range ANSI Class 600 | Vacuum �0-6 Tor to 70 bar (�0�5 psi)
End connections Threaded, welded, �anged
Z73 / Z73T series Full port
Size range �/�”- �” (DN�5 - DN�00)
Pressure range ANSI Class �50 | Vacuum �0-6 Tor to �0 bar (�90 psi)
End connections Flanged
Z74 / Z74T series Full port
Size range �/�”- �” (DN�5 - DN�00)
Pressure range ANSI Class �00 | Vacuum �0-6 Tor to 50 bar (7�5 psi)
End connections Flanged
Z78 / Z78T series Full port
Size range �/�”- �” (DN�5 - DN50)
Pressure range DIN PN�0 | Vacuum �0-6 Tor to �0 bar (5�0 psi)
End connections Flanged
Z77 / Z77T series Full port
Size range �”- �” (DN�0 - DN�00)
Pressure range DIN PN�6 | Vacuum �0-6 Tor to �6 bar (��0 psi)
End connections Flanged
Z28 / Z28T series Standard and full port
Size range �/�”- �” (DN� - DN50)
Pressure range ANSI Class �500 | Vacuum �0-6 Tor to ��� bar (6000 psi)
Size range ��/�”- �” (DN65 - DN�00)
Pressure range ANSI Class �500 | Vacuum �0-6 Tor to �55 bar (�700 psi)
4
Metal seated valves GeneralUp to
400 °C / 752 °F Up to
538 °C / 1000 °FUp to
650 °C / 1200 °FOrdering
code system
Floating Ball Valves
Metal seated valves
Design features up to 400 °C / 752 °F
Body
• Standard and full port design
• Unidirectional
• High �ow capacity and minimum turbulence
• Fire safe certi�ed to API 607 and ISO �0�97
Ball and metal seats set
• Leak rate to EN���66-� Rate B (factory tested) is achieved
by accurate grinding and lapping processes
• Various surface treatments and coatings available for
superb corrosion and abrasion resistance
• Constant preload of ball/seats set obtained by Inconel 7��
Belleville spring
• Low operating torque
Stem
• Blowout-proof design
• Solid one-piece
• Tight stem-to-ball engagement
• High torque durability
• Live loaded stem seal
Minimum thermal expansion
• One size up and shorter body bolts
• Additional spring washers
Tongue & groove labyrinth design
• Zero leakage into the atmosphere
• Full compression of encapsulated body seal
• Accurate alignment of all parts
pp
�ow direction plate
Variety of surface treatments and coatings to withstand corrosion and wear
5Metal seated valves
Metal seated valves
General
• Solid cast body and ends
• Standard and full port design
• Accurate alignment of all parts
• High �ow capacity and minimum turbulence
• Fire safe design to API 607 and ISO �0�97
Ball and metal seats set
• Various coatings available for superb corrosion and
abrasion resistance
• Constant preload of ball/seats set obtained by Inconel 7��
Belleville spring
Body seals
• Encapsulated body and bonnet seal guarantees zero
leakage
Bonnet
• Solid extended bonnet allows safe operation at extremely
high temperature
• Remote automatic operator will work under moderate
enviroment conditions
• Low maintenance and operation requirements
• Oversized non-rising extended stem perfectly aligned
durable even under heavy load.
• Broad ball-stem connection allows torque transfer with no
surface compressive deformation
• Two metallic bearings ensures valve stem aligned rotation
• Inconel 7�� thrust bearings eliminate galling of stem and
valve body
Stem seal
• Live loaded expanded graphite stem seal guarantees low
emission
6
Metal seated valves GeneralUp to Up to Up to Ordering
e system
Floating Ball Valves
Metal seated valves
T Series un
Mate lapp
bearings
at
truction
Body
• Full compliant with ASME B�6.��
• Robust body and bonnet construction from special alloys
• Double the number of shorter bolts reduces thermal
expansion and maintain valve shell integrity even at
elevated temperatures and pressures
• Bolts maintain mechanical properties at temperatures as
high as �00 ̊ C / ��7� ̊ F
• ISO 5��� top platform for easy mounting of actuator and
accessories
Stem
• Perfectly aligned extended stem
• Oversized blow out-proof extended stem capable of
delivering high torque load
• Broad ball-stem connection allows torque transfer with no
surface compression deformation
• Two metallic bearings ensure valve-stem aligned rotation
• Inconel 7�� thrust bearings eliminate galling of stem and
valve body
Ball and metal seats set
• Rigid metallic seats maintain geometric accuracy over
wide ranges of pressure and temperature load
• Leak rate to EN���66-� Rate B (factory tested) is achieved
by accurate grinding and lapping processes
• HVOF coatings available for superb corrosion and abrasion
resistance
• Constant preload of ball/seats set obtained by Inconel 7��
Belleville spring
A
H
S
C D
B
ø Ball port
ø W
TxL threadF PCD
½�without nut
¾" - 1�with nut
PP
N thread
MStem flatsshow valveball position
Preparationfor actuation
28
Floating Ball Valves
Metal seated valves
Valve dimensions
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to 538 °C /
1000 °FUp to
650 °C / ��00 °FOrdering
code system
Size 1⁄4”- 2” | DN8-DN50 | Class 600 | Z47T Series
Std. port
Full port UnitBall port
AB C D H S W M N P F W TxL
Weightkg/lb
KvCvWelded Threaded
DN15 DN8, DN10 mm ��.�5 ��0.60 66.00 �0.60 ���.�0 �90.�0 ���.�0 �50.00 �6.00 5.50 �/�’’ UNF
7.�0 (F0�) �6.00M5x�0
�.�5 7.0
1/2” 1/4”, 3/8” inch 0.�� 5.5� �.60 0.�� 7.�� 7.�9 �.�� 5.9� �.�� 0.�� 0.�� �.�� �.97 6.0
DN20 DN15 mm ��.�0 ��6.95 70.60 ��.55 ���.�0 �9�.�0 ��6.�0 �50.00 5�.�0 5.50 �/�’’ UNF
7.�0 (F0�) �6.00M5x�0
�.55 �0.0
3/4” 1/2” inch 0.56 5.79 �.7� 0.97 7.�� 7.57 �.5� 5.9� �.05 0.�� 0.�� �.�� �.�� �.6
DN25 DN20 mm �0.65 �6�.75 9�.00 ��.75 �90.�0 �07.90 ���.�0 ��0.00 60.50 7.5� 7/�6’’ UNF
7.�0 (F0�) ��.00M5x�0
�.�5 ��.0
1" 3/4” inch 0.�� 6.6� �.70 �.�5 7.50 �.�9 9.�� 9.06 �.�� 0.�0 0.�� �.65 6.�7 ��.�
DN32 DN25 mm �5.50 �79.�5 �0�.50 ��.�5 �95.�0 ���.90 ��6.�0 ��0.00 69.00 7.5� 7/�6’’ UNF
7.�0 (F0�) ��.00M5x�0
�.55 �9.0
11/4" 1" inch �.00 7.06 �.�7 �.6� 7.69 �.�� 9.�� 9.06 �.7� 0.�0 0.�� �.65 7.�� ��.�
DN40 DN32 mm ��.�0 ��9.�0 ��6.00 ��.�0 �95.�0 ���.90 ���.�0 ��7.00 79.�0 �.7� 9/�6’’ UNF
�.00 (F05) 50.00M6x��
�.50 7�.0
11/2" 11/4" inch �.�5 7.�6 �.57 �.9� 7.69 �.�5 9.7� 9.�� �.�� 0.�� 0.�� �.97 9.90 6�.�
DN50 DN40 mm ��.�0 �00.�0 ���.00 56.�0 �00.�0 ��9.90 �5�.�0 ��7.00 90.70 �.7� 9/�6’’ UNF
�.00 (F05) 50.00M6x��
6.00 �0�.0
2" 11/2" inch �.50 7.�9 5.0� �.�� 7.�9 9.05 9.9� 9.�� �.57 0.�� 0.�� �.97 ��.�0 �9.7
5A
5B5C
1
2B6
22
7
18
6A6
2A18
25
24
13
4
11
15
9
17
16
3
16
17
10
8
26
29
29Metal seated valves
Components & materials
Metal seated valves
Size 1⁄4”- 2” | DN8-DN50 | Class 600 | Z47T Series
Item Description Material speci�cation Qty.
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Locking clip A�6� �, �A �
14 Handle A659 G�0�00 Zinc plate, A��0 ��0 �
15 Serrated washer A�9� 6 �
16 Handle nut A�9� �M, EN�506-� A�-�0 �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated,A5�� 660 �
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�5� CF�M, A�79 ���, A�79 ���H �
29 Bonnet bolts A�9� B�M, A5�� 660 �
* Repair kit components** Other coatings avilableWC-Co - Tungsten Carbide with Cobalt binder (HVOF), Stellite (PTA)
Item Description Material speci�cation Qty.
1 Body A�5� CF�M, A��6 WCB, A�05 �
2A Downstream end A�5� CF�M, A��6 WCB, A�05 , A�79 ��� �
2B Upstream end A�5� CF�M, A��6 WCB, A�05 , A�79 ��� �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H,
A��� F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*Stem thrust seal A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��
�
8 Stop pin A5�� �0� �
A
B
H
C D
S
ø Ball port
ø W
TxL threadF PCD
30
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 21⁄2”- 8” | DN65-DN200 | Class 600 | Z47T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
538 °C / 1000 °FUp to
650 °C / ��00 °FOrdering
code system
Std. port
Full port UnitBall port
AB C D H S W M
M (DD)
Q N P F TxLWeightkg/lb
Kv
Welded Threaded Cv
DN65 DN50 mm 5� �00 �60.00 75 ��9.90 ��6.�0 ��6.�0 �0� �50 ��.90 �5.90 ��.70 �"-�� UNF-�A
�6.70 (F�0) �0�.00M�0x��
�9.� 69
21/2” 2" inch �.0� 7.�7 6.�0 �.95 9.�� ��.�� ��.�5 �5.79 5.9� 0.7� 0.6� 0.�9 0.66 �.0� ��.� �0
DN80 DN65 mm 6�.75 ��5.00 ���.00 �0�.�0 �66.50 ���.00 �5�.50 600.00 �9�.50 ��.90 �5.90 ��.70 �"-�� UNF-�A
�6.70 (F�0) �0�.00M�0x��
�0.0 �0�
3" 21/2” inch �.5� ��.�� �.�9 �.�� �0.�9 ��.�� ��.9� ��.6� 7.5� 0.7� 0.6� 0.�9 0.66 �.0� 66.0 ��0
DN100 DN80 mm �0 �56 - ��0 �7�.90 ���.00 - - ��0 ��.�5 ��.75 �5.�0 ��/�’’ -�� UNF-�A
�6.�0 (F��) ��5.00M��x�6
�6.0 ��0
4" 3" inch �.�5 ��.0� - �.�� �0.9� ��.70 - - �.�7 �.�� 0.9� �.�9 �.0� �.9� �0�.� �56
DN150 DN100 mm �00 �00.00 - ��5 �9�.�0 �6�.00 - - �60 ��.�5 ��.75 �5.�0 ��/�’’ -�� UNF-�A
�6.�0 (F��) ��5.00M��x��
6�.0 ��5
6" 4" inch �.9� �5.75 - 5.�� ��.6� ��.�� - - �0.�� �.�� 0.9� �.�9 �.0� �.9� ��9.6 �50
DN200 DN150 mm �50 �90 - �90 �97.�0 5�0.00 - - �60 �5.90 ��.75 �5.�0�" UN-�A
�0.00 (F��) ��5.00M�6x��
���.0 6�5
8" 6" inch 5.9� �9.�9 - 7.�� �5.6� �0.0� - - ��.�7 �.�� 0.9� �.�9 �.57 5.7� ��5.6 7�0
DN200 mm �00 500 - �75 �99.00 65�.00 - - �70 �5.90 �5.90 �6.50 ��/�’’ UN-�A
50.00 (F�6) �65.00M�0x��
��0.0 �7�
8" inch 7.�7 �9.69 - �0.�� �9.65 �5.75 - - ��.50 �.�� �.�� �.�� �.97 6.50 ��6.0 �0�0
(-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.
2A
18
6A
5A
3
6
27
18
5C
6
24
1
5B
25
22
22
7
9
1014A
13
12
14 14B 14C
26
29
8
16
31Metal seated valves
Components & materials
Metal seated valves
Size 21⁄2”- 8” | DN65-DN200 | Class 600 | Z47T Series
Item Description Material speci�cation Qty.
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Tab lock washer A��0 �0� �
14 Handle C.St. A�9 G�0�00 Zinc plate, A��0 ��0 �
14A Stop plate C.St. �.0�0� Zinc plate, A��0 ��0 �
14BWrench head Ductile Iron A5�6 Gr. 65-�5-��, A��6 WCB,
A�5� CF�M�
16 Wrench bolt EN�506-� A�-70/A�-�0, A�9� Gr B�/B�M �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated, A5�� 660 �0-��22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�5� CF�M, A�79 ���, A�79 ��6H �
29 Bonnet bolts A�9� B�M, A5�� 660 �-6* Repair kit components** Other coatings avilableWC-Co - Tungsten Carbide with Cobalt binder (HVOF), Stellite (PTA)
Item Description Material speci�cation Qty.
1 Body A�5� CF�M, A��6 WCB �
2A Downstream end A�5� CF�M, A��6 WCB, A�79 ��� �
2B Upstream end A�5� CF�M, A��6 WCB, A�79 ��� �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6B* Seat seal Graphite �
7*Stem thrust seal A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��
�
8 Stop pin A5�� �0� �
A
H
S
C D
B
ø Ball port
ø W
TxL threadF PCD
½�without nut
¾" - 1�with nut
PP
N thread
MStem flatsshow valveball position
Preparationfor actuation
32
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 1”- 11⁄2” | DN25-DN40 | Class 150/300 | Z73T/Z74T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
538 °C / 1000 °FUp to
650 °C / ��00 °FOrdering
code system
Std. port
UnitBall port
A BC D H S
W M N P F TxL
Weight kg/lb Kv
150 300 150 300 150 300 150 300 Cv
DN25 mm �5.�0 ��7.00 �65.00 55.00 7�.00 �95.00 ���.00 ��6.50 ��0.00 �0�.00 �56.00 7.5�7/�6’’ UNF
7.�0 (F0�) ��.00M5x�0
6.5 �.0 ��5
1” inch �.00 5.00 6.50 �.�7 �.�7 7.6� �.�9 9.�� 9.06 �.�5 - 0.�0 0.�� �.65 ��.� �7.6 �75
DN40 mm ��.�0 �65.00 �90.00 6�.00 �0.�0 �0�.00 ��0.60 �76.�0 ��7.00 ��7.00 �65.00 �.7�9/�6’’ UNF
�.50 (F05) 50.00M6x��
�.5 ��.5 ���
11/2” inch �.50 6.50 7.�� �.6� �.�7 7.9� 9.0� �0.90 9.�� 5.00 - 0.�� 0.�� �.97 ��.7 �5.� 50�
Use Z�7T valve series for sizes ½" (DN�5) and ¾" (DN�0)
5A
5B
5C
1
6A
22
7
18
3
6
2
25
24
13
4
11
15
9
17
16
19
16
17
10
8
26
29
33Metal seated valves
Components & materials
Metal seated valves
Size 1”- 11⁄2” | DN25-DN40 | Class 150/300 | Z73T/Z74T Series
Item Description Material speci�cation Qty.
8 Stop pin A5�� �0� �
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Locking clip A�6� �, �A �
14 Handle A659 G�0�00 Zinc plate, A��0 ��0 �
15 Serrated washer A�9� 6 �
16 Handle nut A�9� �M, EN�506-� A�-�0 �
17 Sleeve PVC �
18 Body bolts/studs A�9� B�M, A�9� B7 zinc plated,A5�� 660 �
19 Body nuts A�9� B�, A�9� 7 zinc plated,A5�� 660 �
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�5� CF�M, A�79 ���, A�79 ��6H �
29 Bonnet bolts A�9� B�M, A5�� 660 �-6* Repair kit components** Other coatings avilableWC-Co - Tungsten Carbide with Cobalt binder (HVOF), Stellite (PTA)
Item Description Material speci�cation Qty.
1 Body A�79, ��6L, A�79 ���, A�50 LF�, A�5� CF�M, A��6 WCB �
2 end A�79, ��6L, A�79 ���, A�50 LF�, A�5� CF�M, A��6 WCB �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*Stem thrust seal A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��
�
ø W
TxL threadF PCD
A
D C
H
S
B
ø Ball port
Preparationfor actuation
P
DD
Stem grooveshows valveball position
Square
N thread N thread
Q M M
M
34
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 2”- 8” | DN50-DN200 | Class 150/300 | Z73T/Z74T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
538 °C / 1000 °FUp to
650 °C / ��00 °FOrdering
code system
Std. port
UnitBall port
A BC D H S
WM
M DD
Q N P F TxLWeight kg/lb Kv
150 300 150 300 150 300 150 300 Cv
DN50 mm 5��7�.00 ��6.00 69.00 75.�0 ���.�0 �6�.�0 �90.00 �56.00 ��7.00 ��7.00 - ��.90 �0.00M�0X�.5
�7.00 (F07) 70.00M�x��
��.5 �5.5 ��5
2” inch �.0� 7.0� �.50 �.7� �.96 �.77 �0.�� ��.�� �0.0� 5.00 5.00 - 0.55 0.79 0.67 �.76 �9.7 ��.� �75
DN80 mm �0 �0�.00 ���.50 77.50 96.�0 �60.�0 �07.00 ��7.�0 �0�.00 �90.50 ��0.00 ��.90 �5.90 ��.70 �"-�� UNF-�A
�6.70 (F�0) �0�.00M�0x��
�5 �� ����
3” inch �.�5 7.99 ��.�� �.05 �.�0 �0.�5 ��.09 ��.67 �5.79 7.50 �.�7 0.7� 0.6� 0.�9 0.�� �.0� 55.0 70.� ��00
DN100 mm �00 ���.50 �0�.�0 ��.50 �0�.50 �76.�0 ���.00 - - ��0.00 �5�.00 ��.�5 ��.75 �5.�0 ��/�’’-�� UNF-�A
�6.�0 (F�0) �0�.00M��x�6
�5 50.0 �50�
4" inch �.9� 9.00 ��.00 �.�� �.�� �0.�� ��.7� - - 9.06 �0.00 �.�� 0.9� �.�9 �.0� �.0� 99.0 ��0.0 ��00
DN150 mm �50 �9�.00 �0�.50 �6�.50 �7�.50 ���.�0 �5�.70 - - ���.00 ���.00 ��.�5 ��.75 �5.�0 ��/�’’-�� UNF-�A
�6.�0 (F��) ��5.00M��x��
90 ��0 �6�5
6" inch 5.9� �5.5� �5.�9 6.�� 6.�7 �5.05 �7.7� - - ��.9� ��.9� �.�� 0.9� �.�9 0.�� �.9� �9�.0 ���.0 5�00
DN200 mm �00 �57.�0 50�.65 ���.50 ��0.70 �95.50 60�.�0 - - ���.00 ���.00 �5.90 ��.75 �5.�0�" UN-�A
�0.00 (F��) ��5.00M�6x��
��0 ��5 76�9
8” inch 7.�7 ��.00 �9.75 9.55 9.�� �9.5� ��.9� - - ��.50 �5.00 �.�� 0.9� �.�9 0.�� 5.7� �6�.0 5�9.0 9�00
(-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.
2
18
6A
Preparationfor actuation
11
3
6
5A
5B
5C
1
22
4
7
9
1014A
1312
14 14B 14C
26
29
8
24
25
16
35Metal seated valves
Components & materials
Metal seated valves
Size 2”- 8” | DN80-DN200 | Class 150/300 | Z73T/Z74T Series
Item Description Material speci�cation Qty.
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Tab lock washer A��0 �0� �
14 Handle C.St. A�9 G�0�00 Zinc plate, A��0 ��0 �
14A Stop plate C.St. �.0�0� Zinc plate, A��0 ��0 �
14BWrench head Ductile Iron A5�6 Gr. 65-�5-��, A��6 WCB,
A�5� CF�M�
16 Wrench bolt EN�506-� A�-70/A�-�0, A�9� Gr B�/B�M �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated, A5�� 660 �-��22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�5� CF�M, A�79 ���, A�79 ��6H �
29 Bonnet bolts A�9� B�M, A5�� 660 �-6* Repair kit components** Other coatings avilableWC-Co - Tungsten Carbide with Cobalt binder (HVOF), Stellite (PTA)
Item Description Material speci�cation Qty.
1 Body A�5� CF�M, A��6 WCB �
2 end A�5� CF�M, A��6 WCB �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*
Stem thrust seal A�79 ��6L, Hardended with LTPN - Low Temperature Plasma carboNitriding technology.B6�7 N077�� Inconel 7��
�
8 Stop pin A5�� �0� �
A
H
S
C D
B
ø Ball port
ø W
TxL threadF PCD
½�without nut
¾" - 1�with nut
PP
N thread
MStem flatsshow valveball position
Preparationfor actuation
36
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 1”- 11⁄2” | DN25-DN40 | PN40 | Z78T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
538 °C / 1000 °FUp to
650 °C / ��00 °FOrdering
code system
Std. port
UnitBall port
AB C D H S W M N P F TxL
Weight kg/lb Kv
F1 F4 F1 F4 Cv
DN25 mm �5.50�60.00 - 50.50�95.00���.00��6.50��0.00��5.00 7.507/�6’’ UNF
7.�0 (F0�) ��.00M5x�0
7.0 - ��5
1” inch �.00 6.�0 - �.99 7.6� �.�9 9.�� 9.06 �.5� 0.�0 0.�� �.65 �5.� - �75
DN40 mm ��.�0�00.00��0.00 76.00�0�.00��0.60�76.�0��7.00�50.00 �.679/�6’’ UNF
�.50 (F05) 50.00M6x��
��.0 �.0 ���
11/2” inch �.50 7.�7 5.5� �.99 7.9� 9.0� �0.90 9.�� 5.9� 0.�� 0.�� �.97 �6.� �7.6 50�
Use Z�7T valve series for sizes ½" (DN�5) and ¾" (DN�0)
5A
5B
5C
1
6A
22
7
18
3
6
2
25
24
13
4
11
15
9
17
16
19
16
17
10
8
26
29
37Metal seated valves
Components & materials
Metal seated valves
Size 1”- 11⁄2” | DN25-DN40 | PN40 | Z78T Series
Item Description Material speci�cation Qty.
8 Stop pin A5�� �0� �
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Locking clip A�6� �, �A �
14 Handle A659 G�0�00 Zinc plate, A��0 ��0 �
15 Serrated washer A�9� 6 �
16 Handle nut A�9� �M, EN�506-� A�-�0 �
17 Sleeve PVC �
18 Body bolts/studs A�9� B�M, A�9� B7 zinc plated,A5�� 660 �
19 Body nuts A�9� B�, A�9� 7 zinc plated,A5�� 660 �
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�5� CF�M, A�79 ���, A�79 ��6H �
29 Bonnet bolts A�9� B�M, A5�� 660 �
* Repair kit components** Other coatings avilableWC-Co - Tungsten Carbide with Cobalt binder (HVOF), Stellite (PTA)
Item Description Material speci�cation Qty.
1 Body A�79, ��6L, A�79 ���, A�50 LF�, X�CrNiMo �7 �� � (�.��0�), GS-C�5 (DIN�.06�9 �
2 end A�79, ��6L, A�79 ���, A�50 LF�, X�CrNiMo �7 �� � (�.��0�), GS-C�5 (DIN�.06�9 �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*
Stem thrust seal A�79 ��6L, Hardended with LTPN - Low Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��
�
ø W
TxL threadF PCD
A
D C
H
S
B
ø Ball port
Preparationfor actuation
P
DD
Stem grooveshows valveball position
Square
N thread N thread
Q M M
M
38
Floating Ball Valves
Metal seated valves
Valve dimensions
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
538 °C / 1000 °FUp to
650 °C / ��00 °FOrdering
code system
Std. port
UnitBall port
A B C D H S W MM
(DD)Q N P F TxL
Weight kg/lb
Cv
DN50 mm 5��50.00 69.00 ���.�0 �6�.�0 �90.00 �56.00 �65.00 - ��.90 �0.00M�0X�.5
�7.00 (F07) 70.00M�x��
��.5 ��5
2” inch �.0� 5.9� �.7� �.77 �0.�� ��.�� �0.0� 6.50 - 0.55 0.79 0.67 �.76 �7.5 �75
DN80 mm �0 ��0.00 77.50 �60.�0 �07.00 ��7.�0 �0�.00 �00.00 ��.90 �5.90 ��.70 �’’-�� UNF-�A
�6.70 (F�0) �0�.00M�0x��
��.0 ����
3” inch �.�5 7.09 �.05 �0.�5 ��.09 ��.67 �5.79 7.�7 0.7� 0.6� 0.�9 0.�� �.0� 6�.� ��00
DN100 mm �00 �90.00 ��.50 �76.�0 ���.00 - - ��0.00 ��.�5 ��.75 �5.�0 ��/�’’-�� UNF-�A
�6.�0 (F�0) �0�.00M��x�6
�5.0 �50�
4" inch �.9� 7.�� �.�� �0.�� ��.7� - - �.66 �.�� 0.9� �.�9 �.0� �.0� 99.0 ��00
DN150 mm �50 �50.00 �6�.50 ���.�0 �5�.70 - - ��5.00 ��.�5 ��.75 �5.�0 ��/�’’-�� UNF-�A
�6.�0 (F��) ��5.00M��x��
�00.0 �6�5
6” inch 5.9� ��.7� 6.�� �5.05 �7.7� - - ��.�� �.�� 0.9� �.�9 0.�� �.9� ��0.0 5�00
Size 2” | DN50 | PN40 | Z78T Series Size 3”- 6” | DN80-DN150 | PN16 | Z77T Series
(-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.
2
18
6A
Preparationfor actuation
11
3
6
5A
5B
5C
1
22
4
7
9
1014A
1312
14 14B 14C
26
29
8
24
25
16
39Metal seated valves
Components & materials
Metal seated valves
Size 2” | DN50 | PN40 | Z78T Series Size 3”- 6” | DN80-DN150 | PN16 | Z77T Series
Item Description Material speci�cation Qty.
8 Stop pin A5�� �0� �
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Tab lock washer A��0 �0� �
14 Handle C.St. A�9 G�0�00 Zinc plate, A��0 ��0 �
14A Stop plate C.St. �.0�0� Zinc plate, A��0 ��0 �
14BWrench head Ductile Iron A5�6 Gr. 65-�5-��, A��6 WCB,
A�5� CF�M�
16 Wrench bolt EN�506-� A�-70/A�-�0, A�9� Gr B�/B�M �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated, A5�� 660 �-��22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�5� CF�M, A�79 ���, A�79 ��6H �
29 Bonnet bolts A�9� B�M, A5�� 660 �-6* Repair kit components** Other coatings avilableWC-Co - Tungsten Carbide with Cobalt binder (HVOF), Stellite (PTA)
Item Description Material speci�cation Qty.
1 Body X�CrNiMo �7 �� � (�.��0�), GS-C�5 (DIN�.06�9) �
2 end X�CrNiMo �7 �� � (�.��0�), GS-C�5 (DIN�.06�9) �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating**: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*
Stem thrust seal "A�79 ��6L, Hardended with LTPN - Low Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��"
�
ø W
TxL threadF PCD
S
D
C
H
B
A
ø Ball port
½�without nut
¾" - 1�with nut
PP
N thread
MStem flatsshow valveball position
Preparationfor actuation
40
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 1⁄4”- 11⁄4” | DN8-DN32 | Class 600 | Z47T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
5�� °C / �000 °FUp to 650 °C /
1200 °FOrdering
code system
Std. port
Full port UnitBall port
AB C D H S W M N P F W TxL
Weightkg/lb
KvCvWelded Threaded
DN15 DN8, DN10 mm ��.�5 �59.00 9�.00 �5.00 ���.00 �9�.00 ��6.00 �50.00 69.50 5.50 �/�’’ UNF
7.�0 (F0�) �6.00M5x�
�.� 7.0
1/2” 1/4”, 3/8” inch 0.�� 6.�6 �.6� �.�� 7.�7 7.5� �.50 5.9� �.7� 0.�� 0.�� �.�� 9.5 6.0
DN20 DN15 mm ��.00 �69.00 �00.00 �0.00 ��7.00 �0�.50 ��9.00 ��0.00 9�.00 7.5� 7/�6’’ UNF
7.�0 (F0�) ��.00M5x�
5.0 �0.0
3/4” 1/2” inch 0.5� 6.65 �.9� �.57 7.�6 �.05 9.0� 9.06 �.�6 0.�0 0.�� �.65 ��.0 �.6
DN25 DN20 mm �0.65 �90.00 ��5.00 �9.00 �96.50 ��6.00 �5�.00 ��7.00 �09.00 �.70 9/�6’’ UNF
7.�0 (F05) 50.00M6x�
�0.5 ��.0
1" 3/4” inch 0.�� 7.�� �.9� �.9� 7.7� �.90 9.9� 9.�� �.�9 0.�� 0.�� �.97 ��.� ��.�
DN32 DN25 mm �9�.00 ��7.00 ���.00 �9.00 �0�.50 ���.00 �60.00 ��7.00 ���.00 �.70 9/�6’’ UNF
7.�0 (F05) 50.00M6x�
��.0 �9.0
11/4" 1" inch 7.60 7.�6 5.�� �.9� �.05 9.�7 �0.�� 9.�� 5.0� 0.�� 0.�� �.97 ��.6 ��.�
17
12
14
15
9
11
16
10
13
25
24
4
7
2A
6A
5C
18
1
5A
5B22
18
6
6
2B
26
8
29
3
41Metal seated valves
Components & materials
Metal seated valves
Size 1⁄4”- 11⁄4” | DN8-DN32 | Class 600 | Z47T Series
Item Description Material speci�cation Qty.
8 Stop pin A5�� �0� �
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Locking clip A�6� �, �A �
14 Handle A659 G�0�00 Zinc plate, A��0 ��0 �
15 Serrated washer A�9� 6 �
16 Handle nut A�9� �M, EN�506-� A�-�0 �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated,A5�� 660 �
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26Bonnet A�79 ��6H, A�79 ���H, B6�7 N077��
Inconel 7���
29 Bonnet bolts A�9� B�M, A5�� 660 �
* Repair kit components
Item Description Material speci�cation Qty.
1 Body A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2A Downstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2B Upstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF).
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*Stem thrust seal "A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��"
�
A
B
S
DC
H
ø Ball port
ø W
TxL threadF PCD
Preparationfor actuation
P
DD
Stem grooveshows valveball position
Square
N thread N thread
Q M M
M
42
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 11⁄2”- 6” | DN40-DN150 | Class 600 | Z47T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
5�� °C / �000 °FUp to
650 °C / 1200 °FOrdering
code system
Std. port
Full port
UnitBall port
AB C D H S W M M DD Q N P F W TxL
Weightkg/lb
Kv
Welded Threaded Cv
DN40 DN32 mm ��.�0 ��7.00 �5�.00 70.00 �05.�0 ��7.�0 ���.00 �0���5.00 - ��.90 �0.00M�0x�.5
��.�5 (F07) 70.00M�x�0
�5 69
11/2” 11/4” inch �.�5 9.�� 6.06 �.76 �.�0 9.7� ��.�� �5.79 5.7� - 0.55 ��.00 0.5� �.76 55.0 �0
DN50 DN40 mm ��.�0 ���.00 �57.00 70.00 �57.�0 �99.�0 ��5.00 600.00 ��5.00 - ��.90 �0.00M�0x�.5
��.�5 (F07) 70.00M�x�0
50 �0�
2" 11/2” inch �.50 9.�9 6.�� �.76 �0.�5 ��.79 ��.�9 ��.6� �.�6 - 0.55 ��.00 0.5� �.76 ��0.0 ��0
DN65 DN50 mm 5� �0�.00 �9�.00 9�.00 �75.00 ���.50 ���.50 �0�.00 ��0.00 ��.90 �5.90 ��.70 �"-�� UNF-�A
��.50 (F�0) �0�.00M�0x��
�0 ��0
21/2” 2" inch �.0� ��.�9 7.6� �.70 �0.�� ��.56 �5.�� �5.79 9.�5 0.7� 0.6� 0.�9 0.7� �.0� �76.0 �56
DN80 DN65 mm 6�.75 �7�.00 �5�.00 ��5.00 �9�.�0 �6�.�0 �0�.�0 600.00 �65.00 ��.�5 ��.75 �5.�0 ��/�"-�� UNF-�A
��.�0 (F��) ��5.00M��x��
��5 ��5
3" 21/2” inch �.5� ��.�� �0.00 �.5� ��.5� ��.�6 �5.�� ��.6� �0.�� �.�� 0.9� �.�9 0.95 �.9� �75.0 �50
DN100 DN80 mm �0 ��0.00 - ��0.00 �95.00 507.70 - - ��0.00 ��.�5 ��.75 �5.�0 ��/�"-�� UNF-�A
��.�0 (F��) ��0.00M�6x�0
�75 6�5
4" 3" inch �.�5 �6.�� - 5.�� �5.55 �9.99 - - ��.�0 �.�� 0.9� �.�9 0.95 5.5� ��5.0 7�0
DN150 DN100 mm �00 5�0.00 - �75.00 ��0.00 ���.00 - - �95.00 �5.90 �5.90 ��.50�" UN-�A
�0.00 (F�6) �65.00M�0x�5
��5 �7�
6" 4" inch �.9� �0.0� - 6.�9 ��.90 ��.06 - - �5.55 �.�� �.�� �.7� �.�� 6.50 957.0 �0�0
(-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.
17
25
24
4
7
2A
6A
5C
18
1
5A
5B
22
18
6
6
2B
3
26
8
29
12
17C17A
9
14A
14
10
13
Preparationfor actuation
11
43Metal seated valves
Components & materials
Metal seated valves
Size 11⁄2”- 6” | DN40-DN150 | Class 600 | Z47T Series
Item Description Material speci�cation Qty.
8 Stop pin A5�� �0� �
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Tab lock washer A��0 �0� �
14 Handle C.St. A�9 G�0�00 Zinc plate, A��0 ��0 �
14A Stop plate C.St. �.0�0� Zinc plate, A��0 ��0 �
14B Wrench head Ductile Iron A5�6 Gr. 65-�5-��, A��6 WCB, A�5� CF�M �
16 Wrench bolt EN�506-� A�-70/A�-�0, A�9� Gr B�/B�M �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated, A5�� 660 �0-��
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�79 ��6H, A�79 ���H,B6�7 N077�� Inconel 7�� �
29 Bonnet bolts A�9� B�M, A5�� 660 �-6
* Repair kit components
Item Description Material speci�cation Qty.
1 Body A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2A Downstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2B Upstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6B* Seat seal Graphite �
7*Stem thrust seal "A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��"
�
ø W
TxL threadF PCD
A
H
S
C D
B
ø Ball port
½�without nut
¾" - 1�with nut
PP
N thread
MStem flatsshow valveball position
Preparationfor actuation
44
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 1⁄4”- 11⁄4” | DN8-DN32 | Class 2500 | Z28T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
5�� °C / �000 °FUp to
650 °C / 1200 °FOrdering
code system
Std. port
Full port UnitBall port
AB C D H S W M N P F W TxL
Weightkg/lb
KvCvWelded Threaded
DN15 DN8, DN10 mm ��.�5 �7�.00 �07.00 50.00 ���.00 �9�.00 ��6.00 �50.00 69.50 5.50 �/�’’ UNF
7.�0 (F0�) �6.00M5x�
�.� 7.0
1/2” 1/4”, 3/8” inch 0.�� 6.�5 �.�� �.97 7.�7 7.5� �.50 5.9� �.7� 0.�� 0.�� �.�� 9.5 6.0
DN20 DN15 mm ��.00 ��9.00 ��0.00 60.00 ��7.00 �0�.50 ��9.00 ��0.00 9�.00 7.50 7/�6’’ UNF
7.�0 (F0�) ��.00M5x�
5.0 �0.0
3/4” 1/2” inch 0.5� 7.�� �.7� �.�6 7.�6 �.05 9.0� 9.06 �.�6 0.�0 0.�� �.65 ��.0 �.6
DN25 DN20 mm �0.65 �09.00 ���.00 6�.00 �96.50 ��6.00 �5�.00 ��7.00 �09.00 �.70 9/�6’’ UNF
7.�0 (F05) 50.00M6x�
�0.5 ��.0
1" 3/4” inch 0.�� �.�� 5.67 �.6� 7.7� �.90 9.9� 9.�� �.�9 0.�� 0.�� �.97 ��.� ��.�
DN32 DN25 mm �9�.00 ��5.00 �5�.00 6�.00 �0�.50 ���.00 �60.00 ��7.00 ���.00 �.70 9/�6’’ UNF
7.�0 (F05) 50.00M6x�
��.0 �9.0
11/4" 1" inch 7.60 �.�6 5.9� �.6� �.05 9.�7 �0.�� 9.�� 5.0� 0.�� 0.�� �.97 ��.6 ��.�
5A
5B5C
1
2B
6
22
7
18
6A6
2A
18
25
24
13
4
11
15
9
12
16
3
14
17
10
8
26
29
45Metal seated valves
Components & materials
Metal seated valves
Size 1⁄4”- 11⁄4” | DN8-DN32 | Class 2500 | Z28T Series
Item Description Material speci�cation Qty.
8 Stop pin A5�� �0� �
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Locking clip A�6� �, �A �
14 Handle A659 G�0�00 Zinc plate, A��0 ��0 �
15 Serrated washer A�9� 6 �
16 Handle nut A�9� �M, EN�506-� A�-�0 �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated,A5�� 660 ��-�6
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26 Bonnet A�79 ��6H, A�79 ���H, B6�7 N077�� Inconel 7�� �
29 Bonnet bolts A�9� B�M, A5�� 660 6
* Repair kit components
Item Description Material speci�cation Qty.
1 Body A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2A Downstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2B Upstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6A* Seat seal Graphite �
7*Stem thrust seal A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��
�
D
C
H
S
B
A
ø Ball port
ø W
TxL threadF PCD
Preparationfor actuation
P
DD
Stem grooveshows valveball position
Square
N thread N thread
Q M M
M
46
Floating Ball Valves
Metal seated valves
Valve dimensions
Size 11⁄2”- 6” | DN40-DN150 | Class 1500 | Z28T Series
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
5�� °C / �000 °FUp to
650 °C / 1200 °FOrdering
code system
Std. port
Full port
UnitBall port
AB C D H S W M M DD Q N P F W TxL
Weightkg/lb
Kv
Welded Threaded Cv
DN40 DN32 mm ��.�0 ��7.00 �5�.00 95.00 �05.�0 ��7.�0 ���.00 �0���5.00 - ��.90 �0.00M�0x�.5
��.�5 (F07) 70.00M�x�0
�5 69
11/2” 11/4” inch �.�5 9.�� 6.06 �.7� �.�0 9.7� ��.�� �5.79 5.7� - 0.55 ��.00 0.5� �.76 55.0 �0
DN50 DN40 mm ��.�0 ���.00 �57.00 �05.00 �57.�0 �99.�0 ��5.00 600.00 ��5.00 - ��.90 �0.00M�0x�.5
��.�5 (F07) 70.00M�x�0
50 �0�
2" 11/2” inch �.50 9.�9 6.�� �.�� �0.�5 ��.79 ��.�9 ��.6� �.�6 - 0.55 ��.00 0.5� �.76 ��0.0 ��0
DN65 DN50 mm 5� �0�.00 �9�.00 ��5.00 �75.00 ���.50 ���.50 �0�.00 ��0.00 ��.90 �5.90 ��.70 �"-�� UNF-�A
��.50 (F�0) �0�.00M�0x��
�0 ��0
21/2” 2" inch �.0� ��.�9 7.6� �.9� �0.�� ��.56 �5.�� �5.79 9.�5 0.7� 0.6� 0.�9 0.7� �.0� �76.0 �56
DN80 DN65 mm 6�.75 �7�.00 �5�.00 ��0.00 �9�.�0 �6�.�0 - - �65.00 ��.�5 ��.75 �5.�0 ��/�"-�� UNF-�A
��.�0 (F��) ��5.00M��x��
��5 ��5
3" 21/2” inch �.5� ��.�� �0.00 5.5� ��.5� ��.�6 - - �0.�� �.�� 0.9� �.�9 0.95 �.9� �75.0 �50
DN100 DN80 mm �0 ��0.00 N/A ��0.00 �95.00 507.70 - - ��0.00 ��.�5 ��.75 �5.�0 ��/�"-�� UNF-�A
��.�0 (F��) ��0.00M�6x�0
�75 6�5
4" 3" inch �.�5 �6.�� N/A 5.5� �5.55 �9.99 - - ��.�0 �.�� 0.9� �.�9 0.95 5.5� ��5.0 7�0
DN150 DN100 mm �00 5�0.00 N/A �95.00 ��0.00 ���.00 - - �95.00 �5.90 �5.90 ��.50�" UN-�A
�0.00 (F�6) �65.00M�0x�5
��5 �7�
6" 4" inch �.9� �0.0� N/A 7.6� ��.90 ��.06 - - �5.55 �.�� �.�� �.7� �.�� 6.50 957.0 �0�0
(-) Due to high valve torque pipe handle cannot be used. A manual gear or automation means should be used to operate the valve.
7
6
3
122
4
24
2529
8A
26
2B
6
18
5B
6A
1716
12
13
14
10
14B
9
2A
5A
5C
18
14A
8
Preparationfor actuation
11
47Metal seated valves
Components & materials
Metal seated valves
Size 11⁄2”- 6” | DN40-DN150 | Class 1500 | Z28T Series
Item Description Material speci�cation Qty.
9* Stem seal Graphite �
10 Follower B7�� ��6L �
11 Disc spring A69� 6�� �7-7PH �
12 Stem nut A�9� �M, EN�506-� A�-�0 �
13 Tab lock washer A��0 �0� �
14 Handle C.St. A�9 G�0�00 Zinc plate, A��0 ��0 �
14A Stop plate C.St. �.0�0� Zinc plate, A��0 ��0 �
14B Wrench head Ductile Iron A5�6 Gr. 65-�5-��, A��6 WCB, A�5� CF�M �
16 Wrench bolt EN�506-� A�-70/A�-�0, A�9� Gr B�/B�M �
17 Sleeve PVC �
18 Body bolts A�9� B�M, A�9� B7 zinc plated, A5�� 660 �6-5�
22 Arrow �ow A�67 �0� �
23 Tag (not shown) A�67 �0� �
24 Bonnet seal Graphite �
25 Stem Bearing B6�7 N077�� Inconel 7�� , Bonze �
26Bonnet A�79 ��6H, A�79 ���H,B6�7 N077��
Inconel 7���
29 Bonnet bolts A�9� B�M, A5�� 660 6-��
* Repair kit components
Item Description Material speci�cation Qty.
1 Body A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2A Downstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
2B Upstream end A�79 ��6H, A�79 ���H, A��� F��, B6�7 N077�� Inconel 7�� �
3Ball Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
4 Stem B6�7 N077�� Inconel 7�� �
5ADownstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5BUpstream seat Base material: A��� F��6, A��� F��6H, A���
F6A Coating: Cr�C� - Chromium Carbide with Nickel Chrome binder (HVOF)."
�
5C Upstream seat spring Inconel 7�� �
6* Body seal Graphite �
6B* Seat seal Graphite �
7*Stem thrust seal A�79 ��6L, Hardended with LTPN - Low
Temperature Plasma carboNitriding technology. B6�7 N077�� Inconel 7��
�
8 Stop pin A5�� �0� �
48
Floating Ball Valves
Metal seated valves
Ordering code systemThe HABONIM metal seated ball valve identi�cation code
� � � � 5 6 7 � 9 �0 �� �� �� �� �5 �6 �7 �� �9 �0 �� . �0
� 0 Z 7 � P - 6 6 6 M N G / � 5 0 -
Size Features Series Design Body/End Ball/Seats Stem Hardening Seals Connection Special Features
(�) The material code of construction identify between the two temperature segments.(�) For more information use Habonim control valves catalog. (�) Other end connections are available upon request.(�) Use �� Series without the 'P' su�x.
It is essential to provide as many details possible on the application such as: media, temperature, pressure, pipe line size and type of connection.
In some applications the available options above are limited to speci�c sizes. Consult with Habonim for details.
Size
Code inch mm
02 1/4” �5
03 3/8” �0
05 1/2” �5
07 3/4” �0
10 � �5
12 �1/4” ��
15 �1/2” �0
20 �” 50
25 �1/2” 65
30 �” �0
40 �” �00
60 6” �50
80 �” �00
Features
B Full bore
N(2) Control
D Diverter bottom entry
S Diverter side entry
Series
Z47 � Pcs design
Z28 High pressure design
Z73 Flanged ANSI �50
Z74 Flanged ANSI �00
Z78 Flanged DIN PN�6
Z78 Flanged DIN PN�0
Body / End connection
4ASTM A�05 C.StA��6 C.St WCB
6ASTM A�79 S.St. ��6/��6LASTM A�5� S.St CF�M/CF�M
F ASTM A�50 LF� C.St
I Inconel 6�5
P ASTM A��� F��
U ASTM A�79 ���
H ASTM A�79 ���H
D Duplex A995 CD�MN �A
K S.Duplex A995 CE�MN 5A
S �5�SMO A�5� CK�MCuN
Ball / Seats Set
6 ASTM A�79 S.St. ��6 / ��6L
G ASTM A�79 S.St. ��6Ti
L ASTM A�79 S.St. ��0H
N ASTM A�79 S.St. ��0
D D Duplex A�79 S���0�
K S.duplex A�79 S��750
S �5�SMO A�79 S���5�
Stem
M S.St. �7-�PH
Z Inconel 7��
Hardening
NLTPN - Low Temperature Plasma carboNitriding
ICr�C� - Chromium Carbide with Nickel Chrome binder - HVOF technique
OWC-Co - Tungsten Carbide with Cobalt binder - HVOF technique
E Stellite - PTA technique
Seals
G Expended Graphite
B NBR Sh. 90
V Viton Sh. 70
Special Features
V30(2) Characterized control downstream seat
WR DD Stem
FF Flat facing
RTJ Ring type joint facing
159 C ball
B Rolled bar
End Connection(3)
BSPT BS ��
DIN DIN �999 (BSPP)
NPT B�.�0.�
XBW Extended buttweld
XSW Extended Socket Weld
Flange connection
ANSI B�6.5 (B�6.�7 series A) - Raised Face�50, �00, 600, 900, �500, �500
EN �09� Pt.�&� Raised FacePN�6, PN�5, PN�0, PN6�, PN�00, PN�50, PN�00
Metal seated valves GeneralUp to
�00 °C / 75� °F Up to
5�� °C / �000 °FUp to
650 °C / ��00 °FOrdering
code system
Design
X -60 °C to ��0 °C (-76 °F to +��6 °F) HermetiX™ stem seal
P(4) -60 °C to +�00 °C (-76 °F to +75� °F)
T(1) -60 °C to +5�� °C (-76 °F to +�000 °F)
T(1) -60 °C to +650 °C (-76 °F to +��00 °F)
49Metal seated valves
Metal seated valves
w w w . h a b o n i m . c o m
ISRAELHabonim HeadquarterTel: +972-4-6914911Fax: [email protected]
USAHabonim USAToll Free Phone: 1-866-261-8400Toll Free Fax: [email protected]
ChinaHabonim ChinaTel: + 86 21 64453190 *146Fax: + 86 21 [email protected]
UKHabonim UKTel: +44-1633-484554Fax: [email protected]
AustraliaHabonim AustraliaTel: +61 3 9556 [email protected]
www.habonim.com
Meta
l seat
ed
val
ves
12/1
5
Top Related