Download - Inlet Valve / Suction Assembly Replacement Kit...suction tube. 8. Push the suction bell into the bottom of the suction tube included in this kit. 9. Hand tighten the suction assembly

Transcript
  • Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/orproperty damage! Retain instructions for future reference.

    IN423400AV 10/04

    Instruction Sheet

    Inlet Valve / Suction AssemblyReplacement Kit

    BUILT TO LAST

    For parts, manuals, product & service informationvisit www.chpower.com

    © 2004 Campbell Hausfeld/Scott Fetzer

    DescriptionThis kit contains parts needed toinstall an improved inlet valveand suction assembly on yoursprayer.

    Safety Information

    Warning indicates a potentiallyhazardous situation which, if notavoided, COULD result in death orserious injury.

    Disconnect power source beforetaking apart or reassemblingsprayer.

    ProcedureIf you have any questions aboutthis procedure, please call 1-800-626-4401 and choose theoption for technical assistance.You can also contact us throughthe web at www.chpower.com.

    1. With an adjustable wrenchremove inlet valve andwasher.

    2. Install the new inlet valve. Note: this new valve does notuse a washer.

    3. Hand tighten the inlet valve,then tighten with a wrench.

    4. Remove the suction fittingfrom the bottom of theblock.

    ! WARNING

    ! WARNING

    5. Wrap the threads on theplug (included in this kit)with PTFE tape.

    6. Insert the plug and tightenwith a wrench.

    7. Remove the existing suctionbell from your sprayer’ssuction tube.

    8. Push the suction bell into thebottom of the suction tubeincluded in this kit.

    9. Hand tighten the suctionassembly onto the inlet valve.

    Remove existinginlet valve andwasher and installnew inlet valve(without washer)

    Remove suctionfitting and installnew plug (wrapthreads with PTFEtape)

    Install suction bellfrom your existingsprayer into newsuction tubeincluded with thiskit

    Suction bellfrom existingsprayer

    Suctiontube

    includedwith this

    kit.

    Inlet Valve AL134401SVSuction Assembly AL138400SVSuction Bell(with filter) AL111000AJ

    Suction Filters(2 Pack) MP215300AJ

    Description Part Number