Failure investigation of brass heat exchanger tube
In the name of god
Flow assurance with OLGABy:Hassan Taziki 9209204 Flow assurancr with olga1The company was established in 1989, focused on the development of the multiphase simulator OLGA.
The development started in 1980 with IFE and Sintef, and the first version was ready in 1984.
In 1989 Scandpower received the responsibility to commercialize the simulator, and the first commercial release was ready in 1991.
OLGA is the industry standard tool for transient simulation of multiphase petroleum production.
The purpose of this manual is to assist the user in the preparation of the input data for an OLGA simulation.
Fig. 2. The general appearance: (a) normal jaw and (b) failed jaw
It is found that the grain sizes of the two samples were similar
PVTsim for OLGA
RUN THE SIMULATIONS
Select variables
trend plot gives the values of a variable as a function of time at a specific location
Case study:Malekuh pipeline
The Olga has 3 models for calculating corrosion:de Ward 95 modelNORSOK modelTop of Line corrosion modelFor Malekuh case OLGA calculated 0.0027 mm per year but it is near the rate of corrosion in published document(0.002 mm per year).
Thanks for your attention
Top Related