HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Beautifil IIFor Beautiful Restorations!
Beautifil IIFor Beautiful Restorations!
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Beautifil II Universal Composite & Flowable
Beautifil II Universal Composite & Flowable
By
Shofu
By
Shofu
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
What is a GIOMER?What is a GIOMER?
• Pre-reacted glass ionomer (PRG) cement used as fillers
• PRG fillers are obtained by reacting acid reactive FL containing glass with polyacids in water
• PRG – high levels of FL release & recharge so that it is similar to GI cements
• Pre-reacted glass ionomer (PRG) cement used as fillers
• PRG fillers are obtained by reacting acid reactive FL containing glass with polyacids in water
• PRG – high levels of FL release & recharge so that it is similar to GI cements
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Why are S-PRG Fillers Important?Why are S-PRG Fillers Important?
• They form a film-like surface which may inhibit plaque formation
• Resistant to saliva
• Increases wear resistance
• Releases and recharges fluoride (like a glass ionomer)
• They form a film-like surface which may inhibit plaque formation
• Resistant to saliva
• Increases wear resistance
• Releases and recharges fluoride (like a glass ionomer)
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Exercise IIntra-occlusal Splint
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
What we will use..
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Instruments to place, hold & block light source
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Step 1: Measure desired length
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Check length & cut UD Fiber
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Apply Bonding Agent
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Apply Beautifil Flow Plus F03
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Place Fibers
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Cover w/ Beautifil Flow Plus F00
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Finished & Polished
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Exercise II:Anterior Layering
Exercise II:Anterior Layering
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Layering: dentin – enamel - translucent
Layering: dentin – enamel - translucent
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Anterior Silicone Modelstep-by-step
Anterior Silicone Modelstep-by-step
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
1. Fill in root = A4, A5, A61. Fill in root = A4, A5, A6
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
1. Photo-cure 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
2. Form Lingual Wall: scallop incisal; .5mm
2. Form Lingual Wall: scallop incisal; .5mm
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
2. Photo-cure 20 sec.2. Photo-cure 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
3. Fill in scalloped incisal w/ Translucent shade 5mm thick3. Fill in scalloped incisal w/ Translucent shade 5mm thick
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
3. Photo-cure 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
4. Add dentin layer A34. Add dentin layer A3
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
4. Dentin layering4. Dentin layering
• Dentin is thicker at the gingival 1/3 and thinnest at the incisal 1/3
• Scallop the incisal edge
• Dentin is thicker at the gingival 1/3 and thinnest at the incisal 1/3
• Scallop the incisal edge
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
4. Build up of dentin layer4. Build up of dentin layer
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
4. Photo-cure 20 sec.4. Photo-cure 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
5. Form mamelons in the incisal 1/3 5. Form mamelons in the incisal 1/3
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
5. Photo-cure 20 sec. 5. Photo-cure 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
6. Apply enamel/facial layer(thin at ging. 1/3 and thicker at incisal 1/3)
6. Apply enamel/facial layer(thin at ging. 1/3 and thicker at incisal 1/3)
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
6. Use brush to feather 6. Use brush to feather
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
6. Photo-cure 20 sec.6. Photo-cure 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
6. Now ready to finish and polish6. Now ready to finish and polish
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
7. Break out of mold and photo-cure root for 20 sec.
7. Break out of mold and photo-cure root for 20 sec.
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
8. Use a finishing bur (fluted or diamond) to contour anatomy
8. Use a finishing bur (fluted or diamond) to contour anatomy
(Spiral cutting bur #48L in your kit)(Spiral cutting bur #48L in your kit)
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
9. Polishing methods
• 9a. Polish w/ Super Snap Singles: 4 disc’s and light touch
• 9a. Polish w/ Super Snap Singles: 4 disc’s and light touch
• 9b. Polish w/ One Gloss point/cup/disc using high RPM’s and light touch
• 9b. Polish w/ One Gloss point/cup/disc using high RPM’s and light touch
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
9b. My preference9b. My preference
• BLACK for contouring
• VIOLET for Finishing
• GREEN for Polishing
• RED for Superpolishing!
• BLACK for contouring
• VIOLET for Finishing
• GREEN for Polishing
• RED for Superpolishing!
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
9b. After Polishing9b. After Polishing
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Exercise III
Class IIPosterior Restoration
Exercise III
Class IIPosterior Restoration
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Layering: dentin - enamelLayering: dentin - enamel
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
CoMax Syringe by AddentCoMax Syringe by Addent
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Exercise IV
Class V Restoration
Exercise IV
Class V Restoration
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Class VClass V
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Class VClass V
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Class IVClass IV
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Beautifil Flow PlusFlowable Composite Resin
Beautifil Flow PlusFlowable Composite Resin
By
Shofu
By
Shofu
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Beautifil Flow PlusBeautifil Flow Plus
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Beautifil Flow Plus:
• Ideal for minimally invasive procedures
• Non-flow in two viscosities: high F00 & medium flow F03
• Used in anterior and posterior
• Can be used for splinting
• DO NOT need another composite resin layer on top
• Ideal in Class I, III, and V
• Cusp replacement and marginal ridges
• Stays where it is placed
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Exercise V
Class I Restoration
Exercise V
Class I Restoration
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
Exercise VI
Direct Resin Veneer
Exercise VI
Direct Resin Veneer
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
OptraSculpt® Padby Ivoclar Vivadent
HOWARD S. GLAZER, DDS HOWARD S. GLAZER, DDS
OptraSculpt® Pad
Non-Stick Shaping & ContouringNo Indentations or Pull-backCreation of Smooth & Even SurfacesLess Time Needed for PolishingHigh Aesthetic Results
Top Related