General Purpose AccelerometerModel JTF
DESCRIPTIONThe JTF accelerometers offer three mounting choices to meet
specific application requirements. The sensing technique for
these accelerometers is based on piezoresistive technology.
Frequency response extends down to dc. Hermetic construction
of the JTF Series provides dependable performance in harsh
industrial environments. The case material is non-magnetic from
either anodized aluminum or stainless steel which provides low
magnetic field susceptibility. Our standard in-line amplifiers and
Instrumentation may be used with the JTF Series accelerom-
eters. The screw mount model can be supplied with an optional
triaxial mounting block, allowing for more than one accelerom-
eter to be used.
FEATURES• 0Hzoperation
• Easycalibration
• Lowimpedance
• Screw,bolt,orstudmountingoptions
• mV/Goutput
• Canrunat0Hz
• Lowmagneticfieldduetocasematerial
Model JTF Bolt Mount
Model JTF Screw Mount
Model JTF Stud Mount
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model JTF
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±5Gto200G(peakG)
Sensitivity See range code table
Transverse sensitivity Lessthan5%
Frequency range See range code table
Frequency response1 ±5%
Non-linearity and hysteresis ±1%fullscale
Mounted base resonance See range code table
Dampingratio(nominal) 0.7C@21°C[70°F]
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -40°Cto121°C[-40°Fto250°F]
Temperature, compensated 21°Cto93°C[70°Fto200°F]1
Temperature effect, zero (max.)
0.02%fullscale/°F
Temperature effect, sensitivity(max.)
±10%
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Excitation,calibration 5Vdc
Excitation,acceptable Upto10Vdc
Electricaltermination,AG111
Tefloncable1,5m[5ft]
Electricaltermination,AG112/AG113
10-32UNF4-pinconnector
Mating connector 10-32UNFsocketplug2
MECHANICAL SPECIFICATIONS
Characteristic Measure
Accelerationlimits(anydirection)
x20
Weight,AG111 0,03kg[1oz]
Weight,AG112&AG113 0,06kg[2.1oz]
Casematerial,AG111 Anodized Aluminum
Casematerial,AG112andAG113
Stainless steel
OPTION CODES
AG111 Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Range 5G,10G,20G,50G,100G,200G
WIRING CODES
Screw mountRed (+)Excitation
Black (-)Excitation
Green (-)Output
White (+)Output
RANGE CODES
Range code Available ranges (peak G)
Sensitivity nominal
Sensitivity range
Usable frequency range
Mounted resonant frequency
GJ ±5G 8mV/G 5mV/Gto12mV/G 0Hzto300Hz 800Hz
GK ±10G 3.8mV/G 2.4mV/Gto5mV/G 0Hzto400Hz 1000Hz
GL ±20G 1.8mV/G 1.2mV/Gto2.4mV/G 0Hzto600Hz 1500Hz
GN ±50G 0.8mV/G 0.5mV/Gto1.2mV/G 0Hzto1000Hz 2000Hz
GP ±100G 0.38mV/G 0.24mV/Gto0.5mV/G
0Hzto1500Hz 3000Hz
GV ±200G 0.18mV/G 0.12mV/Gto0.24mV/G
0Hzto2000Hz 4000Hz
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008727-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model JTF General Purpose Accelerometer
MOUNTING DIMENSIONS
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
NOTES1. Output voltage is proportional to input voltage.2.OnlyavailablewithAG112andAG113.
BOLT OR STUD MOUNT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MA11
DESCRIPTIONThe Model MA11 amplified piezoelectric accelerometers are
designed to be used in Industrial test and automation environ-
ments; including laboratory testing, modal studies and
test cells. The seismic element is mechanically isolated from
the mounting base, resulting in a low base strain sensitivity. The
stainless steel materials are non-magnetic resulting in very low
magnetic field susceptibility. These features, together with a
sealed body, assure accurate and reliable data.
The Model MA11 is available in a number of configurations
and options that includes connector or integral stainless steel
armored cable (specify length at time of ordering), or a submers-
ible format. The Model MA11 can be supplied in a number of
different dynamic ranges to suit the expected vibration levels for
the application.
FEATURES• Generalpurpose
• 2Hzto10kHzusablefrequencyrange
• IEPEoutput
• mV/Goutput
• Intrinsicallysafeoption
• Multipleterminationoptions
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model MA11
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±80G
Sensitivity 100mV/G±10%
Transverse sensitivity Lessthan5%
Temperature sensitivity 0.145/°F
Frequencyrange 2Hzto10kHz±5%3dBlimits
Amplitude linearity Betterthan1%linearity
Mounted base resonance 18kHz
Acceleration range ±80G(dependentonsensitivity)
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57°Cto138°C[-70°Fto280°F]
Shocklimits 2000G
Vibrationlimits 2000G
Sealing,AG901andAG902 IP67/NEMA4
Sealing,AG905 IP68/NEMA4x
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constantcurrent
Currentrange 0.5mAto8mA
Biasvoltage 12Vdc
Cable2,AG902 StainlesssteeloverbraidedPTFE
Cable2,AG905 PU
Standardcablelength2, AG902
4,9m[16ft]
Standardcablelength2, AG905
Specifyattimeoforder
Electricalnoise 0.1mGmax.
Isolation Baseisolated
Mating connector1 MH002
MECHANICAL SPECIFICATIONS
Characteristic Measure
Design Isolated compression in faraday cage
Weight,AG901andAG902 0,11kg[3.85oz]
Weight,AG905 0,15kg[5.3oz]
Material Stainlesssteel
Mountingtorque 6ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
GU 10mV/G
GH 100mV/G
GG 1000mV/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10mV/G;100mV/G;1000mV/G
Electrical termination
2pinMS1
Cablelength(specifyattimeofordering)2
Mounting arrangement
17b.1/4-28UNF17c.Quickfitfemale
MOUNTING DIMENSIONS
WIRING CODES
AG901
PinA (+)Supply
PinB Supplyreturn
AG902 and AG905
White (+)Supply(+)output
Black Supplyreturn
Shield Noconnection
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008740-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MA11 Accelerometer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.OnlyavailablewithAG901.2.OnlyavailablewithAG902andAG903.3.AG902andAG905donotneedmatingconnectors.4. Intrinsicallysafe(2N)onlyavailablewithcableexit.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MA12
DESCRIPTIONThe Model MA12 low profile amplified piezoelectric accelerom-
eters are designed to be used in Industrial test and automation
environments; including laboratory testing, modal studies and
test cells where head room is limited and where a low profile
unit is desirable. The constant current low output impedance
output combined with the ability to drive high load capacitance
allows long runs of low cost cable without degradation of data.
The seismic element is mechanically isolated from the mount-
ing base, resulting in a low base strain sensitivity. The stainless
steel materials are non-magnetic resulting in very low magnetic
field susceptibility. These features, together with a sealed body,
assure accurate and reliable data. The Model MA12 can be
supplied in a number of different sensitivites to suit the expected
vibration levels for the application.
FEATURES• General purpose
• 2 Hz to 8 kHz usable frequency range
• IEPE output
• mV/G output
• Connector or cable output
• Low profile mounting configuration
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MA12
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±80 G
Sensitivity 100 mV/G ±10 %
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range 2 Hz to 8 kHz
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57 °C to 138 °C [-70 °F to 280 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constant current
Current range 0.5 mA to 8 mA
Bias voltage 12 Vdc
Cable2 Stainless steel overbraided PTFE
Electrical noise 0.1 mG max.
Isolation Base isolated
Mating connector1 MH002
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,17 kg [6 oz]
Material Stainless steel
Mounting torque 6 ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
GU 10 mV/G
GH 100 mV/G
GG 1000 mV/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10 mV/G, 100 mV/G, 1000 mV/G
Electricaltermination
2-pin MS1
Cable length2 (specify at time of ordering)
MOUNTING DIMENSIONS
WIRING CODES
AG903
Pin A (+) Supply
Pin B Supply return
AG904
White (+) Supply (+) output
Black Supply return
Shield No connection
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008739-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MA12 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1. Not applicable for AG904.2. Not applicable for AG903.3. AG904 does not need mating connectors.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MA15
DESCRIPTIONThe Model MA15 is a low cost amplified piezoelectric acceler-
ometer which is designed to be used in Industrial test and auto-
mation environments; including laboratory testing, modal studies
and test cells. The constant current low output impedance
output combined with the ability to drive high load capacitance
allows long runs of low cost cable without degradation of data.
The Model MA15 features a high natural frequency, a wide
frequency range and a flat sensitivity vs. temperature response
over the temperature range. The seismic element is mechani-
cally isolated from the mounting base, resulting in a low base
strain sensitivity. The stainless steel materials are non-magnetic
resulting in very low magnetic field susceptibility. These features,
together with a sealed body, assure accurate and reliable data.
The Model MA15 is available in a number of configurations and
options that include connector or integral stainless steel armored
cable (specify length at time of ordering) and an intrinsically
safe option. The mounting hole can be supplied with different
threads. The Model MA15 can be supplied in a number of differ-
ent sensitivities to suit the expected vibration levels for the
application.
FEATURES• General purpose
• 4 mA to 20 mA two-wire proportional to G output
• 2 Hz to 1 kHz usable range
• Intrisically safe option
• Stainless steel overbraided PTFE cable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MA15
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±50 G std.
Range 4 mA to 20 mA for 10 G
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range 2 Hz to 1 kHz ±10 %
Amplitude linearity Better than 1 % linearity
Mounted base resonance 5 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -23 °C to 99 °C [-10 °F to 210 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Voltage
Output 4 mA to 20 mA for 50 G
Supply voltage 12 V to 32 V
Cable, AG907 Stainless steel overbraided PTFE
Standard cable length, AG907
4,9 m [16 ft]
Isolation Base isolated
Electrical noise 0.3 mG max.
Mating connector, AG906 MH008
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,14 kg [5 oz]
Material Stainless steel
Mounting torque 6 ft-lb
MOUNTING DIMENSIONS
AG907White (+) Supply
Black (+) Output
Shield Case ground
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Dynamic 1 G, 2 G, 5 G, 10 G, 50 G
Electricaltermination
3-pin 62 GB connectorCable - cable length (specify at tme of order-ing)17b. 1/4-28 UNF17c. Quickfit female
WIRING CODES
AG906Pin A (+) Supply
Pin B No connection
Pin C (+) Output
RANGE CODES (diff. by dynamic range)
Range Code Range
GE 1 G
GF 2 G
GJ 5 G
GK 10 G
GN 50 G
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008735-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MA15 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MA21
DESCRIPTIONThe Model MA21 miniature, low profile amplified piezoelectric
accelerometers are designed to be used in Industrial test and
automation environments including laboratory testing, modal
studies, and test cells where head room is limited and where
a low profile unit is desirable. The constant current low output
impedance output combined with the ability to drive high
load capacitance allows long runs of low cost cable without
degradation of data. The Model MA21 features a high natural
frequency, a wide frequency range and a flat sensitivity vs.
temperature response over the temperature range. The seismic
element is mechanically isolated from the mounting base, result-
ing in a low base strain sensitivity. The stainless steel materials
are non-magnetic resulting in very low magnetic field suscep-
tibility. These features, together with a sealed body, assure ac-
curate and reliable data.
FEATURES• Miniaturesize
• Lowprofile
• IEPEoutput
• mV/Goutput
• Isolatedacoutput
• StainlesssteeloverbraidedPTFEcable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model MA21
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±80G
Sensitivity 100mV/G±10%@80Hz
Transverse sensitivity Lessthan5%
Temperature sensitivity 0.145/°F
Frequencyrange 2 Hz to 9 kHz
Amplitude linearity Betterthan1%linearity
Mounted base resonance 18 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -12°Cto138°C[10°Fto280°F]
Sealing IP67/NEMA4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constantcurrent
Currentrange 0.5mAto8mA
Bias voltage 12Vdc
Cable StainlesssteeloverbraidedPTFE
Standardcablelength 4,9m[16ft]
Electricalnoise 0.1mGmax.
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,11kg[3.9oz]
Material Stainlesssteel
Mounting torque 6ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
GU 10mV/G
GC 30mV/G
GH 100mV/G
GG 1000mV/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10mV/G,30mV/G,100mV/G,1000mV/G
Electricaltermination
Cablelength(specifyattimeofordering)
MOUNTING DIMENSIONS
WIRING CODES
Wire
Black (+)Supply(+)Output
White Supplyreturn
Shield Connectedtocase
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008730-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MA21 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MA23
DESCRIPTIONThe Model MA23 subminiature amplified piezoelectric acceler-
ometers are designed to be used in laboratory testing, modal
analysis studies, and structural monitoring. The constant current
low output impedance output combined with the ability to drive
high load capacitance allows long runs of low cost cable without
degradation of data. The Model MA23 features a high natural
frequency, a high sensitivity, a wide frequency range and a flat
sensitivity vs. temperature response over the temperature range.
The model MA23 would normally be mounted to the structure
using beeswax or adhesive. The model MA23 can be supplied
with different cable lengths.
FEATURES• Subminiature size
• Low profile and light weight
• IEPE output
• mV/G output
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MA23
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±10 G
Sensitivity 1 V/G
Transverse sensitivity 5 % max.
Temperature sensitivity 0.145/°F
Frequency range 5 Hz to 14 kHz ±10 %
Amplitude linearity Better than 1 % linearity
Mounted base resonance 25 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57 °C to 121 °C [-70 °F to 250 °F]
Sealing IP65/NEMA 2
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constant current
Current range 0.5 mA to 8 mA
Bias voltage 12 V
Cable PTFE
Standard cable length 4,9 m [16 ft]
Electrical noise 0.1 mG max.
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,009 kg [0.3 oz]
Material HE 30 Aluminum
Mounting Beeswax or adhesive
SENSITIVITY CODES
Sensitivity Code Sensitivity
GH 100 mV/G
GG 1000 mV/G (1v/g)
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 100 mV/G, 1000 mV/G (1 v/g)
Electricaltermination
Cable length (specify at time of ordering)
MOUNTING DIMENSIONS
WIRING CODES
Wire
Center (+) Supply (+) Output
Shield Connected to case
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008738-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MA23 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModels MA311 and MA312
DESCRIPTIONThe MA311/312 Series accelerometers are available in a variety
of configurations and can be stud or bolt mounted to meet spe-
cific application requirements. Welded austenitic stainless steel
construction ensures dependable performance in harsh indus-
trial environments. Designed with low impedance strain gages,
the frequency ranges extend down to dc, sensitivity to noise is
minimized, and amplifier electronics are simplified.
FEATURES• ac and dc response
• Amplified voltage output
• 0 Hz to 1800 Hz usable range
• Stud or bolt mounted
• mV/G output
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Models MA311 and MA312
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Sensitivity 100 mV/G
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/ °F
Frequency range Dependent on dynamic range ±5 % (see below)
±1 G and ±2 G dc to 250 Hz
±5 G dc to 300 Hz
±10 G dc to 500 Hz
±20 G dc to 700 Hz
±50 G dc to 1 kHz
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz
Acceleration limits x20 of dynamic range
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -18 °C to 82 °C [0 °F to 180 °F]
Sealing IP65/NEMA 2
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Voltage
Supply voltage 12 V to 24 V @7 mA
Output impedance 50 Ohm
Cable Stainless steel overbraided PTFE
Standard cable length 4,9 m [16 ft]
Electrical noise 10 mG
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,04 kg [1.4 oz]
Material Stainless steel
SENSITIVITY CODES
Sensitivity Code Sensitivity
GH 100 mV/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Dynamic range ±1 G, ±2 G, ±5 G, ±10 G, ±20 G, ±50 G
Electrical termination
Cable length (specify at time of ordering)
Mountingarrangement
17b. 1/4-28 UNF*17c. Quickfit female*
MOUNTING DIMENSIONS
WIRING CODES
WireRed (+) Supply
Blue (-) Supply
Yellow (+) Output
Green (-) Output
Shield Not connected
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008729-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Models MA311 and MA312 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModels MA321 and MA322
DESCRIPTIONThe MA321/322 Series accelerometers are available in a variety
of configurations and can be stud or bolt mounted to meet spe-
cific application requirements. Welded austenitic stainless steel
construction ensures dependable performance in harsh indus-
trial environments. Designed with low impedance strain gages,
the frequency ranges extend down to dc, sensitivity to noise is
minimized, and amplifier electronics are simplified.
FEATURES• ac and dc response
• 4 mA to 20 mA two-wire output proportional to G
• Built-in signal conditioning
• Stud or bolt mounted
• 0 Hz to 1800 Hz usable range
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Models MA321 and MA322
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Output 4 mA to 20 mA range, 12 mA @ 0 G with sensitivity scaled to a full range output, i.e. ±5 G = 1.6 mA/G
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range Dependent on dynamic range ±5 % (see below)
±1 G & ±2 G dc to 250 Hz
±5 G dc to 300 Hz
±10 G dc to 500 Hz
±20 G dc to 700 Hz
±50 G dc to 1 kHz
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz
Acceleration limits x20 of dynamic range
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -18 °C to 82 °C [0 °F to 180 °F]
Sealing IP65/NEMA 2
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Voltage
Supply voltage 12 V to 24 V @7 mA
Output impedance 50 Ohm
Cable Stainless steel overbraided PTFE
Standard cable length 4,9 m [16 ft]
Electrical noise 10 mG
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,04 kg [1.4 oz]
Material Stainless steel
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Dynamic range ±1 G, ±2 G, ±5 G, ±10 G, ±20 G, ±50 G
Electrical termination
Cable length (specify at time of ordering)
Mountingarrangement
17b. 1/4-28 UNF*17c. Quickfit female*10-32 UNF female
MOUNTING DIMENSIONS
WIRING CODES
WireRed (+) Supply
Blue (-) Supply
Yellow (+) Output
Green (-) Output
Shield Not connected
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008728-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Models MA321 and MA322 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModels MA331 and MA332
DESCRIPTIONThe MA331/332 Series accelerometers are designed to be used
in Industrial test and automation environments including labora-
tory testing, modal studies and test cells in application requiring
a frequency response down to 0 Hz. The MA331/332 Series
accelerometers come in different styles. This mV ouput ver-
sion is for applications where strain gage signal conditioning is
likely to be used to condition the signal. The Model MA331/332
Series can also be supplied in a number of different frequency
ranges and sensitivites to suit the application. The stainless steel
materials are non-magnetic resulting in very low magnetic field
susceptibility. These features, together with a sealed body, as-
sure accurate and reliable data.
FEATURES• dc response
• mV/V output
• For use with strain gage amps
• Stainless steel overbraided PTFE cable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Models MA331 and MA332
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Output 15 mV to 75 mV full scale
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range Dependent on dynamic range ±5 % (see below)
±1 G and ±2 G dc to 250 Hz
±5 G dc to 300 Hz
±10 G dc to 500 Hz
±20 G dc to 700 Hz
±50 G dc to 1 kHz
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz
Acceleration limits x20 of dynamic range
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -18 °C to 82 °C [0 °F to 180 °F]
Sealing IP65/NEMA 2
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Voltage
Supply voltage 5 V @ 7 mA
Output impedance 3000 ohm
Cable Stainless steel overbraided PTFE
Standard cable length 4,9 m [16 ft]
Electrical noise 10 mG
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,04 kg [1.4 oz]
Case material Stainless steel
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Dynamic range 1 G, 2 G, 5 G, 10 G, 20 G, 50 G
Electricaltermination
Cable length (specify at time of ordering)
Mountingarrangement
17b. 1/4-28 UNF17c. Quickfit female10-32 UNF female
WIRING CODES
WireRed (+) Supply
Blue (-) Supply
Yellow (+) Output
Green (-) Output
Shield Not connected
RANGE CODES
Range Code Range
GE 1 G
GF 2 G
GJ 5 G
GK 10 G
GL 20 G
GN 50 G
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
008723-2-EN IL50 GLO September 2009Copyright © 2009 Honeywell International Inc. All rights reserved.
Models MA331 and MA332 Accelerometer
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
TYPICAL SYSTEM DIAGRAM
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
MOUNTING DIMENSIONS
4 holes for 6-40 UNF bolts
25,4 mm[1.0 in]
33,02 mm[1.30 in]
1/4-28 UNF
25,4 mm
[1.0 in]
3,09 mm[0.122 in]
Model MA331 (order code AG919) Model MA332 (order code AG920)
WARNINGPERSONAL INJURY
•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION
•Theinformationpresentedinthisdatasheetisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
and distributors. For application
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModels MA341 and MA342
DESCRIPTIONThe MA341/342 Series miniature amplified piezoelectric acceler-
ometers are designed to be used in Industrial test and automa-
tion environments; including laboratory testing, modal studies
and test cells where space is limited and small size is desired
or a high natural frequency is required. The constant current low
output impedance output combined with the ability to drive high
load capacitance allows long runs of low cost cable without deg-
radation of data. The seismic element is mechanically isolated
from the mounting base, resulting in a low base strain sensitivity.
The stainless steel materials are non-magnetic resulting in very
low magnetic field susceptibility. These features, together with a
sealed body, assure accurate and reliable data. The MA341/342
series is available in a number of configurations and options that
includes different mounting arrangement patterns and different
stainless steel armored cable lengths, (specify length at time of
ordering).
FEATURES• High frequency
• 2 Hz to 15 kHz usable frequency range
• IEPE output
• mV/G output
• Isolated ac output
• Stainless steel overbraided PTFE cable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Models MA341 and MA342
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±80 G
Sensitivity 100 mV/G ±10 %
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range 2 Hz to 15 kHz ±5 %
Amplitude linearity Better than 1 % linearity
Mounted base resonance 22 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -23 °C to 138 °C [-10 °F to 280 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constant current
Current range 0.5 mA to 8 mA
Bias voltage 12 Vdc
Cable Stainless steel overbraided PTFE
Standard cable length 4,9 m [16 ft]
Electrical noise 0.1 mG max.
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,03 kg [1 oz]
Material Stainless steel
Mounting torque 6 ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
GU 10 mV/G
GC 30 mV/G
GH 100 mV/G
GG 1000 mV/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10 mV/G, 30 mV/G, 100 mV/G, 1000 mV/G
Electrical termination
Cable length (specify at time of ordering)
MOUNTING DIMENSIONS
WIRING CODES
Wire
Black (+) Supply (+) Output
White Supply return
TYPICAL SYSTEM DIAGRAM
31,00 mm[1.22 in]
15,00 mm[0.59 in]
10-32 UNF female
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008731-2-EN IL50 GLO December 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Models MA341 and MA342 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAQ13
DESCRIPTIONThe Model MAQ13 charge output miniature accelerometer is
designed to be used in Industrial test and automation environ-
ments; including laboratory testing, modal studies and test cells
where high temperatures are likely to be encountered and where
space is limited and small size is desired or a high natural fre-
quency is required. The MAQ13 is a self-generating piezoelec-
tric transducer which has no internal electronics and requires no
external power for operation. These units are usually connected
to a local charge amplifier that is mounted as near as possible
in a lower temperature environment. The Model MAQ13 features
a wide frequency range, and a flat sensitivity vs. temperature
response over the temperature range. The seismic element
is mechanically isolated from the mounting base, resulting in
a low base strain sensitivity. The stainless steel materials are
non-magnetic resulting in very low magnetic field susceptibility.
These features, together with a sealed body, assure accurate
and reliable data.
FEATURES• Small size
• Charge output (pC/G)
• 30 kHz mounted frequency
• General purpose
• Suitable for high temperatures
• Side entry microdot connector
• No internal electronics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAQ13
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±800 G
Sensitivity 20 pC/G std.
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range Dependent on charge amplifier
Amplitude linearity Better than 1 % linearity
Mounted base resonance 30 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57 °C to 249 °C [-70 °F to 480 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Self generating
Output Charge
Charge amplitude required CA2
Mating connector Microdot
Capacitance 450 pF
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,03 kg [1 oz]
Material Stainless steel
Mounting torque 2 ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
YC 10 pC/G
YD 20 pC/G
YE 30 pC/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10 pC/G, 20 pC/G, 30 pC/G
MOUNTING DIMENSIONS
WIRING CODES
WireCenter (+) Output
Shield Case ground
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008737-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAQ13 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAQ14
DESCRIPTIONThe Model MAQ14 charge output miniature accelerometer is
designed to be used in Industrial test and automation environ-
ments; including laboratory testing, modal studies and test cells
where high temperatures are likely to be encountered and where
space is limited and small size is desired or a high natural fre-
quency is required. The MAQ14 is a self generating piezoelec-
tric transducer which has no internal electronics and requires no
external power for operation. These units are usually connected
to a local charge amplifier that is mounted as near as possible
in a lower temeperature environment. The seismic element is
mechanically isolated from the mounting base, resulting in a low
base strain sensitivity. The stainless steel materials are
non-magnetic resulting in very low magnetic field susceptibility.
These features, together with a sealed body, assure accurate
and reliable data.
FEATURES• Small size
• Charge output (pC/G)
• 18 kHz mounted frequency
• General purpose
• Side entry microdot connector
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAQ14
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range 1000 G
Sensitivity 50 pC/G
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range 1 Hz to 10 kHz
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57 °C to 249 °C [-70 °F to 480 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Self generating
Standard cable length (AG910)
4,9 m [16 ft] (only AG910)
Charge amplitude required CA2
Mating connector (AG909) Microdot (only AG909)
Capacitance 450 pF
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,03 kg [1.2 oz]
Material Stainless steel
Mounting torque 2 ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
YC 10 pC/G
YE 30 pC/G
YF 50 pC/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10 pC/G, 30 pC/G, 50 pC/G
MOUNTING DIMENSIONS
WIRING CODES
WireCenter (+) Output
Shield Case ground
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008725-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAQ14 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAQ36
DESCRIPTIONThe Model MAQ36 charge output miniature accelerometer is de-
signed to be used in Industrial test and automation environments
including laboratory testing, modal studies and test cells where
high temperatures are likely to be encountered and where space
is limited and small size is desired or a high natural frequency is
required. The MAQ36 is a self generating piezoelectric trans-
ducer which has no internal electronics and requires no external
power for operation. These units are usually connected to a local
charge amplifier that is mounted as near as possible in a lower
temperature environment. The Model MAQ36 features a wide
frequency range, and a flat sensitivity vs. temperature response
over the temperature range. The seismic element is mechani-
cally isolated from the mounting base, resulting in a low base
strain sensitivity. The stainless steel materials are non-magnetic
resulting in very low magnetic field susceptibility. These features,
together with a sealed body, assure accurate and reliable data.
FEATURES• Sub-miniature
• Charge output (pC/G)
• 45 kHz mounted frequency
• Low sensitivity
• Side entry with microdot connector
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAQ36
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±2000 G
Sensitivity 5 pC/G ±10 %
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.045/°F
Frequency range 1 Hz to 30 kHz
Amplitude linearity Better than 1 % linearity
Mounted base resonance 45 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57 °C to 249 °C [-70 °F to 480 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Self generating
Output Charge
Charge amplitude required CA2
Mating connector Microdot
Capacitance 300 pF
Isolation Base isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,007 kg [0.25 oz]
Material Stainless steel
Mounting torque 2 ft-lb
SENSITIVITY CODES
Sensitivity Code Sensitivity
YA 0.5 pC/G
YB 5 pC/G
YF 50 pC/G
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 0.5 pC/G, 5 pC/G , 50 pC/G
MOUNTING DIMENSIONS
WIRING CODES
WireCenter (+) Output
Shield Case ground
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008726-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAQ36 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
TYPICAL SYSTEM DIAGRAM
Standard, as shownGlued mounting
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAQ41
DESCRIPTIONThe Model MAQ41 charge output accelerometer is designed to
be used in Industrial test and automation environments; includ-
ing laboratory testing, modal studies and test cells where high
temperatures are likely to be encountered. The MAQ41 is a
self generating piezoelectric transducer which has no internal
electronics. These units are usually connected to a local charge
amplifier that is mounted as near as possible in a lower temeper-
ature environment. The seismic element is mechanically isolated
from the mounting base, resulting in a low base strain sensitivity.
The stainless steel materials are non-magnetic resulting in very
low magnetic field susceptibility. These features, together with a
sealed body, assure accurate and reliable data.
FEATURES• Enhanced output
• Enhanced sensitivity charge output (pC/G)
• 10 kHz mounted frequency
• TNC connector often ideal for underground leak detection
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAQ41
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±100 G
Sensitivity 1100 pC/G ±10 %
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range Dependent on charge amplifier
Amplitude linearity Better than 1 % linearity
Mounted base resonance 10 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -57 °C to 249 °C [-70 °F to 480 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Self generating
Charge amplitude required CA2
Mating connector TNC
Capacitance 4000 pF
Isolation Non-isolated
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,1 kg [3.5 oz]
Material Stainless steel
Mounting torque 6 ft-lb
MOUNTING DIMENSIONS
WIRING CODES
WireCenter (+) Output
Shield Case ground
TYPICAL SYSTEM DIAGRAM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008724-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAQ41 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAT53
DESCRIPTIONThe Model MAT53 amplified piezoelectric accelerometers com-
bined with integrated temperature sensors are designed to be
used in Industrial test and automation environments; including
laboratory test, modal studies and testing cells where simul-
taneous temperature and velocity vibration are required to be
measured. The constant current low output impedance for the
velocity vibration combined with the current output for the tem-
perature output provide the ability to drive high load capacitance
allows long runs of low cost cable without degradation of data.
The seismic element is mechanically isolated from the mounting
base, resulting in a low base strain sensitivity. The stainless steel
materials are non-magnetic resulting in very low magnetic field
susceptibility. These features, together with a sealed body, as-
sure accurate and reliable data. The Model MAT53 is available in
a number of configurations and options that includes connector
or integral stainless steel armored cable (specify length at time
of ordering), The Model MAT53 can be supplied in a number of
different dynamic ranges to suit the expected temperature and
vibration levels.
FEATURES• Temperature and vibration dual output
• 2 Hz to 10 kHz usable frequency range
• IEPE output
• Low base strain sensitivity
• Current O/P for temperature
• Stainless steel overbraided PTFE cable
• Stainless steel armored cable or three-pin connector electri-
cal options
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAT53
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range ±80 G
Sensitivity 100 mV/G ±10 %
Temperature range -18 °C to 93 °C [0 °F to 200 °F]
Transverse sensitivity Less than 5 %
Temperature sensitivity 10 mV/°F
Frequency range 2 Hz to 10 kHz ±5 %
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -12 °C to 138 °C [-10 °F to 280 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constant current
Current range 0.5 mA to 8 mA
Bias voltage 12 Vdc
Cable1 Stainless steel overbraided PTFE
Standard cable length1 4,9 m [16 ft]
Electrical noise 0.3 mG max.
Isolation Base isolated
Mating connector2 MH008
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,11 kg [3.8 oz]
Material Stainless steel
Mounting torque 6 ft-lb
AG931White (+) Supply (+) Output
Black (+) Temperature
Shield Supply return
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 10 mV/G, 30 mV/G, 100 mV/G , 1000 mV/G
Electricaltermination
3-pin 62 GB connector2
Cable1 (specify cable length at time or order)
Mountingarrangement
17b. 1/4-28 UNF17c. Quickfit female
WIRING CODES
AG930Pin A (+) Supply (+) Output
Pin B Supply return
Pin C (+) Temperature
SENSITIVITY CODES
Sensitivity Code Sensitivity
GU 10 mV/G
GB 30 mV/G
GH 100 mV/G
GG 1000 mV/G
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008734-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAT53 Accelerometer
MOUNTING DIMENSIONS
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1. Not applicable for AG930.2. Not applicable for AG931.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAV51
DESCRIPTIONThe Model MAV51 amplified piezoelectric accelerometers with
velocity output are designed to be used in Industrial test and
automation environments; including laboratory testing, modal
studies and test cells. The MAV51 is ideal for applications where
velocity content of vibration is a more meaningful parameter to
measure and where noise issues or system simplicity makes
integration of the acceleration signal in the sensor rather than
the signal conditioning more attractive. The constant current low
output impedance output combined with the ability to drive high
load capacitance allows long runs of low cost cable without deg-
radation of data. The seismic element is mechanically isolated
from the mounting base, resulting in a low base strain sensitivity.
The stainless steel materials are non-magnetic resulting in very
low magnetic field susceptibility. These features, together with
a sealed body, assure accurate and reliable data. The Model
MAV51 is available in a number of configurations and options
that includes connector or integral stainless steel armored cable
(specify length at time of ordering). The Model MAV51 can be
supplied in a number of different sensitivites to suit the expected
vibration levels for the application.
FEATURES• Velocity measurement
• 5 Hz to 4 kHz ±5 % usable frequency range
• IEPE output
• mV/mm/s output
• Integral stainless steel overbraided PTFE cable
• Isolated ac output suitable for harsh environments
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAV51
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Sensitivity 4 mV/mm/s
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range 5 Hz to 4 kHz ±5 %
Amplitude linearity Better than 1 % linearity
Mounted base resonance 18 kHz nominal
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -23 °C to 138 °C [-10 °F to 280 °F]
Sealing IP67/NEMA 4
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Constant current
Current range 0.5 mA to 8 mA
Bias voltage 12 Vdc
Cable1 Stainless steel overbraided PTFE
Standard cable length1 4,9 m [16 ft]
Electrical noise 0.3 mG max.
Isolation Base isolated
Mating connector2 MH002
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,11 kg [3.88 oz]
Material Stainless steel
Mounting torque 6 ft-lb
MOUNTING DIMENSIONS
AG927White (+) Supply (+) Output
Black Supply return
Shield Not connected
TYPICAL SYSTEM DIAGRAM
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Mountingarrangement
17b. 1/4-28 UNF17c. Quickfit female
Optionalsensitivity
SA. 12,7 mV/mm/secSB. 25,4 mV/mm/secSC. 50,8 mV/mm/secSD. 101,6 mV/mm/sec
Electricaltermination
2-pin MS1
Cable2 (specify cable length at time of order)
WIRING CODES
AG926Pin A (+) Supply (+) Output
Pin B Supply return
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008736-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAV51 Accelerometer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1. Not applicable for AG926.2. Not applicable for AG927.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AccelerometerModel MAV52
DESCRIPTIONThe SENSOTEC Model MAV52 amplified piezoelectric ac-
celerometers with velocity output are designed to be used in
Industrial test and automation environments; including labora-
tory testing, modal studies and test cells. The MAV52 is ideal
for applications where velocity content of vibration is a more
meaningful parameter to measure and where noise issues or
system simplicity makes integration of the acceleration signal
in the sensor rather than the signal conditioningmore attractive.
The 4 mA to 20 mA output makes it ideal in applications where
noise, cable losses and long cable runs are likely to be an issue.
The seismic element is mechanically isolated from the mounting
base, resulting in a low base strain sensitivity. The stainless steel
materials are non-magnetic resulting in very low magnetic field
susceptibility. These features, together with asealed body, as-
sure accurate and reliable data. The model MAV52 is available in
a number of configurations and options that includes connector
or integral stainless steel armored cable (specify length at time
of ordering), intrinsically safe option or a submersible format.
The mounting hole can be supplied with different threads. The
Model MAV52 can be supplied in a number of different sensitiv-
ites to suit the expected vibration levels for the application.
FEATURES• Velocity measurement
• 2 Hz to 10 kHz usable frequency range
• 4 mA to 20 mA proportional to velocity
• Submersible option
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MAV52
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Dynamic range 50 G
Sensitivity 25,4 mm/s for 4 mA to 20 mA
Transverse sensitivity Less than 5 %
Temperature sensitivity 0.145/°F
Frequency range 2 Hz to 1 kHz ±10 %
Amplitude linearity Better than 1 % linearity
Mounted base resonance 5 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -23 °C to 99 °C [-10 °F to 210 °F]
Sealing, AG928 and AG932 IP67/NEMA 4
Sealing, AG929 IP68/NEMA 4x
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Input Voltage
Output 4 mA to 20 mA
Supply voltage 12 V to 32 V
Current range 0.5 mA to 8 mA
Bias voltage 12 Vdc
Cable2 , AG932 Stainless steel armored PTFE
Cable2 , AG929 PU
Standard cable length2 4,9 m [16 ft]
Electrical noise 0.3 mG max.
Isolation Base isolated
Mating connector1 MH008
MECHANICAL SPECIFICATIONS
Characteristic Measure
Weight 0,14 kg [5 oz]
Material Stainless steel
Mounting torque 6 ft-lb
AG929Red (+) Supply
Blue (+) Output
Shield Case ground
OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Sensitivity 12,7 mm/s RMS; 25,4 mm/s RMS ; 50,8 mm/s RMS; 101,6 mm/s RMS
Electricaltermination
3-pin 62 GB connector1
Cable length2 (specify cable length at time of order)
Mountingarrangement
17b. 1/4-28 UNF17c. Quickfit female
WIRING CODES
AG928Pin A (+) ve Accel.
Pin B No connection
Pin C 0 V
RANGE CODES
Range Code Range
SA 12,7 mm/s RMS
SB 25,4 mm/s RMS
SC 50,8 mm/s RMS
SD 101,6 mm/s RMS
AG932White (+) Supply
Black (+) Output
Shield Case ground
MOUNTING DIMENSIONS
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008733-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MAV52 Accelerometer
TYPICAL SYSTEM DIAGRAM
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1. Only available with AG928.2. Only available with AG929 and AG932.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Vibration Meter KitModels VM110 and VM120
DESCRIPTIONThe Model VM110 Vibration Meter is a battery powered, portable
instrument designed to accept any MA Series accelerometer, to
enable vibration measurements to be taken. The meter is capa-
ble of providing RMS and peak measurements of acceleration,
velocity and displacement. A switch for filtering high frequencies
is provided. dc and ac output via a D-type socket is available for
logging or for further signal analysis.
FEATURES• Hand held
• LCD display
• Battery powered
• Velocity and displacement output
• ac or dc output
• Designed to work with constant current accelerometers
• Low pass filter reduces wide-band noises
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Models VM110 and VM120
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Acceleration 2 G, 20 G, 200 G
Velocity range 2 in/s, 20 in/s, 200 in/s
Displacement 2 thou, 20 thou, 200 thou
Upper frequency Selectable low pass filters of 5 kHz, 10 kHz and 20 kHz
Lower frequency Fixed, acceleration: 5 Hz,
velocity: 10 Hz, displacement: 15 Hz
Detector RMS or peak switch selectable
Display 0.5 in, 3.5 digit LCD (3 readings/s)
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Accuracy acceleration 1.5 % RMS, 3 % peak
Velocity 2.5 % RMS, 4 % peak
Displacement 3.5 % RMS, 5 % peak
Noise acceleration 2 mG RMS; 6 mG peak
Velocity 0.01 in/s RMS; 0.03 in/s peak
Displacement 0.02 in RMS; 0.06 in peak
Input 10 mV/G from hand held accelerometer or other MA Series via cal hood
Output ac 200 mV, full range as selected;
dc 200 mV, full range as selected
Power Two PP3 9 V battery, low battery indica-tor on display. Battery life 15 hours approximately
Kit contents One vibration meter; one hand held probe; one magnet; one 4 in spike; one carrying case
TYPICAL SYSTEM DIAGRAM
ACCESSORIES
Part No.AG902 Model MA11, 100 mV/G accelerometer, 5 m
integral PTFE cable
AG901 Model MA11, 100 mV/G, two-pin MS connector
CA42 Coiled cable assembly two- pin MS to IA110 for use with AG901
CA43 Coiled cable assembly TNC to IA110 for use with MTN/1020
2100 Hand held probe
CA61 IA110 adapter for use with AG902
MM1 Magnet, 1/4 in UNF mounting, 35 mm, strength 20 kg
PS1 Hand held spike, 25 mm, 1/4 in UNF mounting
PS2 Hand held spike, 100 mm, 1/4 in UNF mounting
PS3 Hand held spike, 150 mm, 1/4 in UNF mounting
PS4 Hand held spike, 300 mm, 1/4 in UNF mounting
HE1 Carrying case with foam cut outs
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008732-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Models VM110 and VM120 Vibration Meter Kit
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Top Related