1 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Hinges
HINGESPlease Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.
Technical Guide
Please Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.
Date of print/release
July2017
IMPORTANT PLEASE NOTE:The information contained in this literature is for illustrative purposes only to assist in choosing your desired kitchen. While we endeavour to keep the information up to date and correct we do not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability and suitability of the doors and products that appear in this literature.
We aim to showcase as many different items as possible and therefore some products have been installed and photographed purely to show as many of our product features as possible and they should not be taken as an example of how they are intended to be installed in real kitchen installations.
It is therefore the responsibility of the installer to check the corresponding manufacturer’s installation information and the manufacturer’s technical information to ensure this is up to date and to ensure that the products can be fitted in a way they are displayed and the products are suitable for your requirements.
We specifically exclude any liability in this regard unless the products are fitted in accordance with the specifications we supply and the manufacturer’s installation recommendations are used in a way recommended by the manufacturer and in accordance with the manufacturer’s technical information provided.
The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product information available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.
We are proud that all our products that we sell are covered by a statutory warranty but this does not stop all our products naturally ageing overtime. As a result of this natural ageing process we are therefore unable to provide an identical colour finish to the existing products you have purchased from us with any products that we supply you from the same product line. In such event our liability will be limited to the purchase price paid for the product you are seeking to replace.
Due to the limitations on photographic reproduction, colours may differ slightly from the actual products shown. Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability.
3 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Hinges
Blum
hin
ge
4 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Clip-On 110 Degree BLUM Hinge With Integrated BLUMOTION Soft Close
Features:
• Integrated BLUMOTION soft close action • Opening angle: 110 degrees • Hinge cup depth: 13mm• Hinge cup diameter: 35mm• 3-dimensional adjustment• Tool-free door-to-carcass assembly
and removal• Each pack includes 2 hinges,
mounting plates, boss and arm cover caps and screws
Made of Steel
95BLUM200,110 Degree Hinge,
Integrated BLUMOTION Soft Close Action
HingesBLUM
CODE DESCRIPTION
95BLUM200 BLUM SOFT CLOSE HINGE - PACK OF 2
FIRA TestedDetails available on request
109
Hinge systemsCLIP top BLUMOTION / CLIP top – hinges ◀Overview – hinges ◀◀
Catalogue 2016/2017 • KA-120
Hinge applications Page Webcode CLIP top CLIP top Application Boss FixingBLUMOTION With spring Unsprung
▶▶ Angled application – standard
▶▶ Angled application – glass door
▶▶ Angled application – frame door
● With spring ○ Unsprung
▶▶ Overview – angled applicationsAngled application Nº 1–109 148
▶▶ Mounting platesMounting plate Mate-
rialHeight adjustment
Horizontal cam mounting plate 20/32 Steel Cam ±2 mm 186 186 187 187Horizontal cam mounting plate for dual application 20/32 Steel Cam ±2 mm 187Horizontal cam mounting plate 22/32 Zinc Cam ±2 mm 188 188Horizontal cam mounting plate 20/32 Zinc Cam ±2 mm 188INSERTA cruciform mounting plate 37/32 Steel Cam ±2 mm 189Cruciform cam mounting plate 37/32 Steel Cam ±2 mm 188 189Cruciform cam mounting plate for twin application 37/32 Steel Cam ±2 mm 189Cruciform mounting plate 37/32 Zinc Screws (two-part) ±2 mm 189 190Cruciform mounting plate 37/32 Steel Elongated hole ±2 mm 190Cruciform mounting plate 37/32 Steel Elongated hole ±3 mm 190 190 191Cruciform mounting plate for twin application 37/32 Steel Elongated hole ±3 mm 191Cruciform mounting plate 28/32 Steel Elongated hole ±3 mm 191Cruciform mounting plate 37/32 Zinc Elongated hole ±3 mm 191Angled spacer 37/32 Zinc +5° 192Angled spacer 37/32 Zinc –5° 192
Number of Hinges
Door
hei
ght (
mm
)
* kg
The number of hinges depends on the door weight and front height.
To achieve good stability, distances between hinges should be as large as possible.
Information on weight and height apply to a standard door width of 600 mm.
±5° angled application 164 DQDW6M ● ● ○
–15° III – angled hinge full overlay 166 DQDWVY ● ○
–30° III – angled hinge full overlay 168 DQDXLA ● ○
–45° III – angled hinge full overlay 170 DQDYAM ● ○
CRISTALLO angled appli-cation 172 ● ○
+45° angled hinge for glass doors 174 ●
+20° angled hinge for glass doors 176 ●
±5° angled application for glass doors 178 ●
+45° angled hinge with mini boss 180 ●
+20° angled hinge with mini boss 182 ●
±5° angled application with mini boss 184 ●
Hin
ge s
yste
ms
5 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Hinges
Sile
nce
hing
es
6 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesSILENCE
Mounting Details
CODE DESCRIPTION
95SILENCE005 105 DEGREE SILENCE HINGE WITH INTEGRATED SOFT CLOSING PISTON95SILENCE001A SILENCE HINGE PLATE 15mm95SILENCE001B SILENCE HINGE PLATE 18mm (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18mm95SILENCE001H SILENCE HINGE CAM PLATE 18mm95SILENCE001J SILENCE HINGE CAM EURO PLATE 18mm95SILENCE100 SILENCE HINGE CUP COVERS (100pcs per bag)95SILENCE101 SILENCE HINGE ARM COVERS (100pcs per bag)
Clip-On 105 Degree SILENCE Hinge With Integrated Soft Closing Piston
Features:
• SILENCE hinge with integrated soft closing piston• Opening angle: 105 Degree• Hinge cup depth: 11.5mm• Hinge cup diameter: 35mm• Side adjustment• Height adjustment• Depth adjustment
Made of Steel
95SILENCE00595 Degree Hinge
Integrated Soft Close
Cranking 0mm
FIRA TestedDetails available on request
7 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesSILENCE
Mounting Details
CODE DESCRIPTION
95SILENCE002 30 DEGREE SILENCE HINGE WITH INTEGRATED SOFT CLOSING PISTON95SILENCE001A SILENCE HINGE PLATE 15mm95SILENCE001B SILENCE HINGE PLATE 18mm (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18mm95SILENCE001H SILENCE HINGE CAM PLATE 18mm95SILENCE001J SILENCE HINGE CAM EURO PLATE 18mm95SILENCE100 SILENCE HINGE CUP COVERS (100pcs per bag)95SILENCE101 SILENCE HINGE ARM COVERS (100pcs per bag)
Clip-On 30 Degree SILENCE Hinge With Integrated Soft Closing Piston
Features:
• SILENCE hinge with integrated soft closing piston• Hinge cup depth: 11.5mm• Hinge cup diameter: 35mm• Side adjustment• Height adjustment• Depth adjustment
Made of Steel
95SILENCE00230 Degree Hinge
Integrated Soft Close
FIRA TestedDetails available on request
8 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesSILENCE
Mounting Details
CODE DESCRIPTION
95SILENCE003 45 DEGREE SILENCE HINGE WITH INTEGRATED SOFT CLOSING PISTON95SILENCE001A SILENCE HINGE PLATE 15mm95SILENCE001B SILENCE HINGE PLATE 18mm (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18mm95SILENCE001H SILENCE HINGE CAM PLATE 18mm95SILENCE001J SILENCE HINGE CAM EURO PLATE 18mm95SILENCE100 SILENCE HINGE CUP COVERS (100pcs per bag)95SILENCE101 SILENCE HINGE ARM COVERS (100pcs per bag)
Clip-On 45 Degree SILENCE Hinge With Integrated Soft Closing Piston
Features:
• SILENCE hinge with integrated soft closing piston• Hinge cup depth: 11.5mm• Hinge cup diameter: 35mm• Side adjustment• Height adjustment• Depth adjustment
Made of Steel
95SILENCE00345 Degree Hinge
Integrated Soft Close
FIRA TestedDetails available on request
9 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesSILENCE
Mounting Details
CODE DESCRIPTION
95SILENCE004 165 DEGREE SILENCE HINGE WITH INTEGRATED SOFT CLOSING PISTON95SILENCE001A SILENCE HINGE PLATE 15mm95SILENCE001B SILENCE HINGE PLATE 18mm (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18mm95SILENCE001H SILENCE HINGE CAM PLATE 18mm95SILENCE001J SILENCE HINGE CAM EURO PLATE 18mm95SILENCE100 SILENCE HINGE CUP COVERS (100pcs per bag)95SILENCE101 SILENCE HINGE ARM COVERS (100pcs per bag)
Clip-On 165 Degree SILENCE Hinge With Integrated Soft Closing Piston
Features:
• SILENCE hinge with integrated soft closing piston• Hinge cup depth: 11.5mm• Hinge cup diameter: 35mm• Side adjustment• Height adjustment• Depth adjustment
Cranking 0mm
Made of Steel
95SILENCE004165 Degree Hinge
Integrated Soft Close
FIRA TestedDetails available on request
10 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesSILENCE
SILENCE Hinge Plates & Cover Caps
SILENCE No. of hinges per door Determinating the number of Silence hinges to be used according to the door height and weight:
CODE DESCRIPTION
95SILENCE001A SILENCE HINGE PLATE 15MM95SILENCE001B SILENCE HINGE PLATE 18MM (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18MM95SILENCE001H SILENCE HINGE CAM PLATE 18MM95SILENCE001J SILENCE HINGE CAM EURO PLATE 18MM95SILENCE100 SILENCE HINGE CUP COVER CAP - SOLD AS PACK OF 10095SILENCE101 SILENCE HINGE ARM COVER CAP - SOLD AS PACK OF 100
95SILENCE001HSilence Hinge Cam Plate 18mm
95SILENCE001DSilence Euro Plate 18mm
11 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Hinges
Titu
s +
hing
es
12 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Features:
• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: ST-i• Damping integrated in the hinge cup• Easy assembly and disassembly• Adjustment of the damping force
Cranking 0mm
Side adjustment +3 / -1mm
Height adjustment +2 / -2mm
Depth adjustment +5 / -1.5mm
ST-i110 Degree Soft Close Hinge
CODE DESCRIPTION
95LAMA60 ST-i 110 DEGREE INTERGRATED SOFT CLOSE HINGE
Made of steel
Mounting Details
13 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Features:
• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: Slide-on
Cranking 18mm
Side adjustment +3 / -0.5mm
Height adjustment +2 / -2mm
Depth adjustment +4 / -0mm
Basic110 / 45 Degree Slide-On Hinge
CODE DESCRIPTION
95LAMA05 BASIC CLIP-ON 110/45 DEGREE HINGE
Mounting Details
Made of steel and plastic
14 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Features:
• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: ST
Cranking 18mm
Side adjustment +3 / -1mm
Height adjustment +2 / -2mm
Depth adjustment +5 / -1.5mm
ST110 / 45 Degree Clip-On Hinge
CODE DESCRIPTION
95LAMA08 ST SLIDE-ON 110/45 DEGREE HINGE
Mounting Details
Made of steel and plastic
15 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Cranking 0mm
Features:
• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: Slide-on
Side adjustment +3 / -0.5mm
Height adjustment +2 / -2mm
Depth adjustment +4 / -0mm
Basic110 Degree Slide-On Hinge
CODE DESCRIPTION
95LAMA01 BASIC SLIDE-ON 110 DEGREE HINGE
Mounting Details
Made of steel
16 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Features:
• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: ST
Quick and practical assembley of the hinge on the mounting plate by pressing gently on the rear part of the hinge arm
One button disassembly
Side adjustment +3 / -1mm
Height adjustment +2 / -2mm
Depth adjustment +5 / -1.5mm
ST110 Degree Clip-On Hinge
CODE DESCRIPTION
95LAMA02 ST CLIP-ON 110 DEGREE HINGE
Mounting Details
Made of steel
Cranking 0mm
17 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Features:
• Opening angle: 135°-165°• Drilling diameter for hinge cup: 35mm• Drilling depth: 12mm• Hinge on plate mounting system: ST
Enables better accessibility into cabinet interior due to the wider opening angle
Opening angle can be easily adjusted by rotating the appropriate screw on the hinge arm
Side adjustment +3 / -1mm
Height adjustment +2 / -2mm
Depth adjustment +5 / -1.5mm
ST170 Degree Clip-On Hinge
CODE DESCRIPTION
95LAMA03 ST CLIP-ON 170 DEGREE HINGE
Mounting Details
Made of steel and zinc
Cranking 0mm
18 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Cranking 0mm
Features:
• Opening angle: 135°-165°• Drilling diameter for hinge cup: 35mm• Drilling depth: 12mm• Hinge on plate mounting system: Slide-on
Enables better accessibility into cabinet interior due to the wider opening angle
Opening angle can be easily adjusted by rotating the appropriate screw on the hinge arm
Side adjustment +3 / -0.5mm
Height adjustment +2 / -2mm
Depth adjustment +4 / -0mm
Basic170 Degree Slide-On Hinge
CODE DESCRIPTION
95LAMA04 BASIC SLIDE-ON 170 DEGREE HINGE
Mounting Details
Made of steel and zinc
19 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Mounting Details
Cranking 0mm
Features:
• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: Slide-on
Standard drilling for hinge and mounting plate
Hinge integrated adjustment
Height adjustment +2 / -2mm
Depth adjustment +5 / -1.5mm
BasicFor Pie-Cut Corner Cabinet
CODE DESCRIPTION
95LAMA14 BASIC PIE CUT CORNER HINGE
Mounting Details / Drilling Details / Adjustments
Drilling Details
Any basic mounting plate of thickness. D=0 can be used.
The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing.
Adjustments
Side adjustment +3 / -1mm
Cup made of steel, arm made of zinc
20 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
STMounting Plates
FOR ST FREE, ST PLUS & ST CONCEALED HINGES
Steel mounting plates Drilling Pattern Dimensions
CODE DESCRIPTION
95LAMA02A CLIP ON PLATE 15MM - NON EURO SCREW 95LAMA02B CLIP ON PLATE 18MM - NON EURO SCREW 95LAMA02C EURO CLIP ON PLATE 15MM - EURO SCREW 95LAMA02D EURO CLIP ON PLATE 18MM - EURO SCREW
Made of steelHeight adjustment + / -2mm
Clip on plate - Non Euro screw
95LAMA02A / 95LAMA02B
Euro clip on plate - Euro screw
95LAMA02C / 95LAMA02D
21 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
BasicMounting Plates
FOR BASIC CONCEALED HINGES
Steel mounting plates Drilling Pattern Dimensions
CODE DESCRIPTION
95LAMA01A SLIDE ON CLIP PLATE 15MM95LAMA01B SLIDE ON CLIP PLATE 18MM95LAMA01C EURO SLIDE ON PLATE 15MM95LAMA01D EURO SLIDE ON PLATE 18MM
Made of steelHeight adjustment + / -2mm
Slide on plate 95LAMA01A / 95LAMA01B
Euro slide on plate 95LAMA01C / 95LAMA01D Mounting plate
thickness
22 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Concealed Hinge Parts
Concealed HingesInformation
Note: The drawing shows the ST plus hinge on a cam adjustable mounting plate
1. Hinge cup2. Hinge arm3. Closing mechanism4. Inner link5. Outer link6. Axis
7. Holes for fixing screws8. Side adjustment screw9. Height cam adjuster10. Depth cam adjuster11. ST time-saving mounting system12. Mounting plate
23 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Concealed HingesInformation
By Choosing the Hinge of Appropriate Cranking
By Choosing the Mounting Plates of Appropriate Thickness
Door Clearance and Gap
HOW TO ACHIEVE THE DESIRED DOOR OVERLAY?
Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:
To achieve the desired overlay (X) while using a determined drilling distance (K), a mounting plate of appropriate thickness (D) must be chosen from the enclosed table
The door clearance (F>Fmin) and gap (Z) represent the minimal necessary space needed for the correct opening and closing of the door. The minimal required values depend upon the cup drilling distance (K), door thickness (V) and type of hinge. The minimum clearance scale can be found in the catalogue. When using on double doors with one party-wall the door clearance must be twice as large (F>2Fmin).
Full overlay Use a hinge with 0mm cranking
Cabinet side Door
24 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Concealed HingesInformation
ST Time Saving System
Slide On System
HOW TO ASSEMBLE THE HINGE AND THE MOUNTING PLATE?
The door is assembled on the cabinet side simply by fixing the two hooks under the hinge arm on the outer part of the mounting plate and pressing gently on the rear part of the hinge arm. For disassembly press the button on the rear of the hinge arm.
* ST free series
* ST plus series
* ST series
* Basic series
The hinge is assembled by sliding the hinge arm over the mounting plate. The lower part of the horizontal set up screw must fit correctly into the groove on the mounting plate. After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.
Assembly
Disassembly
25 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Concealed HingesInformation
Concealed Hinges with Ø 35mm Hinge Cup Diameter
HOW MANY HINGES PER DOOR?For the furniture user’s safety please use the appropriate number of hinges so that thedoor height or weight does not exceed that shown below.
Check the enclosed specifications for the number of required hinges per door by considering both height and weight. In case of doubt please contact Titus or your local distributor.
* ST series
* Basic series
* Special hinges
26 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Concealed HingesInformation
By Rotating the Appropriate Screws
By Temporarily Releasing the Fixing Screw
SIDE ADJUSTMENT
The side adjustment is made by rotating the appropriate screw on the hinge arm.
* ST plus series
* ST series
* Basic series
* Miniprimat series
* Wide angle hinge
For side adjustment:
1. Release the fixing screw2. Make the necessary adjustment by
rotating the appropriate screw3. Tighten the fixing screw
Without releasing the fixing screw no side adjustment is possible.
The side adjustment is indespensable to align the door with the side of the cabinet thus allowing perfect lifetime opening and closing of the door.
27 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Concealed HingesInformation
By Rotating the Cam Adjuster
Manual Adjustment by Releasing the Adjustment Screw
By Releasing the Fixing Screws of Mounting Plate
HEIGHT ADJUSTMENT
The height adjustment is made by rotating the cam adjuster on the mounting plate.
For height adjustment the adjustment screw has to be temporarily released during manual adjustment.
For height adjustment the two mounting plate fixing screws have to be temporarily released while making the adjustment manual.
* ST free, ST plus and ST series with cam adjustable mounting plate
* ST free, ST plus and ST series with horizontal mounting plate
* ST free, ST plus and ST series with cam adjustable cruciform mounting plates
* Basic series
* Miniprimat series
* Wide angle hinge
Height adjustment is necessary to achieve perfect vertical door position that emphasises the accuracy of manufacture.
28 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Concealed HingesInformation
By Rotating the Cam Adjuster
By Rotating the Cam Adjuster
DEPTH ADJUSTMENT
The system enables easy adjustment of the door depth to assure that the door fits well on the side of the cabinet.
The adjustment is made by rotating the cam adjuster on the hinge arm.
The depth adjustment is made by temporarily releasing the adjustment screw (ST series) or fixing screw (Basic series). After the adjustment is made the screw has to be re-tightened.
* ST free series
* ST plus series
* ST series
* Basic series
* Miniprimat
HingesTITUS +
29 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
HingesTITUS +
Adjustment InstructionsST-i 110 Degree Soft Close Hinge with Integrated damping
1. The damping force of ST-i hinge is factory pre-set to the maximum damping value.
2. To decrease the damping force, slide the damping switch off.
3. When the damping switch is in the ‘OFF’ position, the ST-i hinge uses 33% of it’s damping force.
4. To increase the damping force again, slide the damping switch on.
The damping switch in a pre-set ‘ON’ position
1. Lift the damping activator
2. Slide the damping switch to ‘OFF’ position
The damping switch in ‘OFF’ position
Slide the damping switch to ‘ON’ position
30 TEL 0161 336 3636
FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]
Contact usTelephone 0161 336 3636Fax 0161 336 3638Free-Fax 0808 144 2422Email [email protected] www.tkc.co.ukOrder www.trade.tkc.co.uk
AddressUnit 3Cranberry DriveDentonManchesterM34 3UL
Area Sales
Scotland 07770 017422North East 07766 021114Yorkshire 07976 643485North West 07584 241838Merseyside, North Wales & West Cheshire 07970 923474East Midlands 07770 017440West Midlands 07899 948786South West & South Wales 07799 320910London & Home Counties (North) 07823 442668London & Home Counties (South) 07792 078830Northern Ireland 07436 160980
All goods are sold subject to our Terms and Conditions of Sale which are available upon request.
Top Related